API tools faq
paste
Advertisement
YantoSAE

dmesg111

YantoSAE
Feb 9th, 2012
158
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.18 KB | None | 0 0
raw download clone embed print report
  1. /root$ dmesg
  2. Linux version 2.6.39.2 (nay@HPmini) (gcc version 4.5.4 20110526 (prerelease) (Linaro GCC 4.5-2011.06-0) ) #3 Fri Aug 5 21:55:39 WIT 2011
  3. prom: fw_arg0=00000008, fw_arg1=a1f87fb0, fw_arg2=a1f88470, fw_arg3=00000004
  4. MyLoader: sysp=f0f0f0f0, boardp=f0f0f0f0, parts=f0f0f0f0
  5. bootconsole [early0] enabled
  6. CPU revision is: 00019374 (MIPS 24Kc)
  7. SoC: Atheros AR7241 rev 1
  8. Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:5.000MHz
  9. Determined physical RAM map:
  10. memory: 02000000 @ 00000000 (usable)
  11. Initrd not found or empty - disabling initrd
  12. Zone PFN ranges:
  13. Normal 0x00000000 -> 0x00002000
  14. Movable zone start PFN for each node
  15. early_node_map[1] active PFN ranges
  16. 0: 0x00000000 -> 0x00002000
  17. On node 0 totalpages: 8192
  18. free_area_init_node: node 0, pgdat 802b6420, node_mem_map 81000000
  19. Normal zone: 64 pages used for memmap
  20. Normal zone: 0 pages reserved
  21. Normal zone: 8128 pages, LIFO batch:0
  22. pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  23. pcpu-alloc: [0] 0
  24. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
  25. Kernel command line: board=TL-MR3420 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
  26. PID hash table entries: 128 (order: -3, 512 bytes)
  27. Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  28. Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  29. Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  30. Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  31. Writing ErrCtl register=00000000
  32. Readback ErrCtl register=00000000
  33. Memory: 29380k/32768k available (2005k kernel code, 3388k reserved, 388k data, 176k init, 0k highmem)
  34. SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  35. NR_IRQS:80
  36. Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
  37. pid_max: default: 32768 minimum: 301
  38. Mount-cache hash table entries: 512
  39. NET: Registered protocol family 16
  40. MIPS: machine is TP-LINK TL-MR3420
  41. registering PCI controller with io_map_base unset
  42. bio: create slab <bio-0> at 0
  43. pci 0000:00:00.0: [168c:ff1c] type 0 class 0x000200
  44. pci 0000:00:00.0: fixup device configuration
  45. pci 0000:00:00.0: reg 10: [mem 0x00000000-0x0000ffff 64bit]
  46. pci 0000:00:00.0: supports D1
  47. pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  48. pci 0000:00:00.0: PME# disabled
  49. pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
  50. pci 0000:00:00.0: BAR 0: set to [mem 0x10000000-0x1000ffff 64bit] (PCI address [0x10000000-0x1000ffff])
  51. PCI: mapping irq 72 to pin1@0000:00:00.0
  52. Switching to clocksource MIPS
  53. NET: Registered protocol family 2
  54. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  55. TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  56. TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  57. TCP: Hash tables configured (established 1024 bind 1024)
  58. TCP reno registered
  59. UDP hash table entries: 256 (order: 0, 4096 bytes)
  60. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  61. NET: Registered protocol family 1
  62. PCI: CLS 0 bytes, default 32
  63. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  64. JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  65. msgmni has been set to 57
  66. io scheduler noop registered
  67. io scheduler deadline registered (default)
  68. Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  69. serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
  70. console [ttyS0] enabled, bootconsole disabled
  71. Atheros AR71xx SPI Controller driver version 0.2.4
  72. m25p80 spi0.0: found w25q32, expected m25p80
  73. m25p80 spi0.0: w25q32 (4096 Kbytes)
  74. spi0.0: searching for MyLoader partition table at offset 0x10000
  75. spi0.0: searching for MyLoader partition table at offset 0x20000
  76. spi0.0: searching for MyLoader partition table at offset 0x30000
  77. spi0.0: searching for MyLoader partition table at offset 0x40000
  78. spi0.0: no MyLoader partition table found
  79. Searching for RedBoot partition table in spi0.0 at offset 0x3fe000
  80. Searching for RedBoot partition table in spi0.0 at offset 0x3ff000
  81. No RedBoot partition table detected in spi0.0
  82. spi0.0: no WRT160NL signature found
  83. Creating 5 MTD partitions on "spi0.0":
  84. 0x000000000000-0x000000020000 : "u-boot"
  85. 0x000000020000-0x000000160000 : "kernel"
  86. 0x000000160000-0x0000003f0000 : "rootfs"
  87. mtd: partition "rootfs" set to be root filesystem
  88. mtd: partition "rootfs_data" created automatically, ofs=32A000, len=C6000
  89. 0x00000032a000-0x0000003f0000 : "rootfs_data"
  90. 0x0000003f0000-0x000000400000 : "art"
  91. 0x000000020000-0x0000003f0000 : "firmware"
  92. ag71xx_mdio: probed
  93. eth0: Atheros AG71xx at 0xba000000, irq 5
  94. eth0: Found an AR7240 built-in switch
  95. eth1: Atheros AG71xx at 0xb9000000, irq 4
  96. eth1: connected to PHY at ag71xx-mdio:04 [uid=004dd041, driver=Generic PHY]
  97. Atheros AR71xx hardware watchdog driver version 0.1.0
  98. ar71xx-wdt: timeout=15 secs (max=21)
  99. TCP westwood registered
  100. NET: Registered protocol family 17
  101. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  102. All bugs added by David S. Miller <davem@redhat.com>
  103. VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  104. Freeing unused kernel memory: 176k freed
  105. input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
  106. Button Hotplug driver version 0.4.1
  107. Registered led device: tl-mr3x20:green:system
  108. Registered led device: tl-mr3x20:green:qss
  109. Registered led device: tl-mr3x20:green:3g
  110. eth0: link up (1000Mbps/Full duplex)
  111. JFFS2 notice: (375) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 17 of xref (0 dead, 2 orphan) found.
  112. eth0: link down
  113. device eth0 entered promiscuous mode
  114. eth0: link up (1000Mbps/Full duplex)
  115. br-lan: port 1(eth0) entering forwarding state
  116. br-lan: port 1(eth0) entering forwarding state
  117. PPP generic driver version 2.4.2
  118. ppp_async: Unknown symbol crc_ccitt_table (err 0)
  119. Compat-wireless backport release: compat-wireless-2011-06-23
  120. Backport based on wireless-testing.git master-2011-06-22
  121. cfg80211: Calling CRDA to update world regulatory domain
  122. usbcore: registered new interface driver usbfs
  123. usbcore: registered new interface driver hub
  124. usbcore: registered new device driver usb
  125. cfg80211: World regulatory domain updated:
  126. cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  127. cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  128. cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  129. cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  130. cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  131. cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  132. PCI: Setting latency timer of device 0000:00:00.0 to 64
  133. ath: EEPROM regdomain: 0x0
  134. ath: EEPROM indicates default country code should be used
  135. ath: doing EEPROM country->regdmn map search
  136. ath: country maps to regdmn code: 0x3a
  137. ath: Country alpha2 being used: US
  138. ath: Regpair used: 0x3a
  139. ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  140. Registered led device: ath9k-phy0
  141. ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xb0000000, irq=72
  142. cfg80211: Calling CRDA for country: US
  143. ip_tables: (C) 2000-2006 Netfilter Core Team
  144. cfg80211: Regulatory domain changed to country: US
  145. cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  146. cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  147. cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  148. cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  149. cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  150. cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  151. cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  152. NET: Registered protocol family 24
  153. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  154. ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller
  155. ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
  156. ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
  157. ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
  158. hub 1-0:1.0: USB hub found
  159. hub 1-0:1.0: 1 port detected
  160. nf_conntrack version 0.5.0 (461 buckets, 1844 max)
  161. usb 1-1: new high speed USB device number 2 using ar71xx-ehci
  162. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  163. usbcore: registered new interface driver usbserial
  164. USB Serial support registered for generic
  165. usbcore: registered new interface driver usbserial_generic
  166. usbserial: USB Serial Driver core
  167. USB Serial support registered for GSM modem (1-port)
  168. usbcore: registered new interface driver option
  169. option: v0.7.2:USB Driver for GSM modems
  170. usb 1-1: USB disconnect, device number 2
  171. usb 1-1: new high speed USB device number 3 using ar71xx-ehci
  172. option 1-1:1.0: GSM modem (1-port) converter detected
  173. usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
  174. option 1-1:1.1: GSM modem (1-port) converter detected
  175. usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
  176. ar71xx-wdt: enabling watchdog timer
  177. br-lan: port 1(eth0) entering forwarding state
  178. eth0: link down
  179. device eth0 left promiscuous mode
  180. br-lan: port 1(eth0) entering disabled state
  181. eth0: link down
  182. device eth0 entered promiscuous mode
  183. eth0: link up (1000Mbps/Full duplex)
  184. br-lan: port 1(eth0) entering forwarding state
  185. br-lan: port 1(eth0) entering forwarding state
  186. br-lan: port 1(eth0) entering forwarding state
  187. eth0: link down
  188. device eth0 left promiscuous mode
  189. br-lan: port 1(eth0) entering disabled state
  190. eth0: link down
  191. device eth0 entered promiscuous mode
  192. eth0: link up (1000Mbps/Full duplex)
  193. br-lan: port 1(eth0) entering forwarding state
  194. br-lan: port 1(eth0) entering forwarding state
  195. br-lan: port 1(eth0) entering forwarding state
  196. eth0: link down
  197. device eth0 left promiscuous mode
  198. br-lan: port 1(eth0) entering disabled state
  199. eth0: link down
  200. device eth0 entered promiscuous mode
  201. eth0: link up (1000Mbps/Full duplex)
  202. br-lan: port 1(eth0) entering forwarding state
  203. br-lan: port 1(eth0) entering forwarding state
  204. br-lan: port 1(eth0) entering forwarding state
  205. eth0: link down
  206. device eth0 left promiscuous mode
  207. br-lan: port 1(eth0) entering disabled state
  208. eth0: link down
  209. device eth0 entered promiscuous mode
  210. eth0: link up (1000Mbps/Full duplex)
  211. br-lan: port 1(eth0) entering forwarding state
  212. br-lan: port 1(eth0) entering forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!