Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- $ dmesg
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-39squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 9 20:49:59 UTC 2012
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=237575ca-80eb-4934-b9e2-ef8b5c27e28f ro quiet splash
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
- [ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffe0000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
- [ 0.000000] DMI present.
- [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
- [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
- [ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] TOM2: 0000000130000000 aka 4864M
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000
- [ 0.000000] initial memory mapped : 0 - 20000000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000
- [ 0.000000] 0000000000 - 00cfe00000 page 2M
- [ 0.000000] 00cfe00000 - 00cff90000 page 4k
- [ 0.000000] kernel direct mapping tables up to cff90000 @ 10000-16000
- [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
- [ 0.000000] 0100000000 - 0130000000 page 2M
- [ 0.000000] kernel direct mapping tables up to 130000000 @ 14000-1a000
- [ 0.000000] RAMDISK: 36f18000 - 37fef610
- [ 0.000000] ACPI: RSDP 00000000000fbb70 00014 (v00 ACPIAM)
- [ 0.000000] ACPI: RSDT 00000000cff90000 00044 (v01 062909 RSDT1125 20090629 MSFT 00000097)
- [ 0.000000] ACPI: FACP 00000000cff90200 00084 (v01 062909 FACP1125 20090629 MSFT 00000097)
- [ 0.000000] ACPI: DSDT 00000000cff90450 0BC08 (v01 A1159 A1159000 00000000 INTL 20060113)
- [ 0.000000] ACPI: FACS 00000000cffa8000 00040
- [ 0.000000] ACPI: APIC 00000000cff90390 00080 (v01 062909 APIC1125 20090629 MSFT 00000097)
- [ 0.000000] ACPI: MCFG 00000000cff90410 0003C (v01 062909 OEMMCFG 20090629 MSFT 00000097)
- [ 0.000000] ACPI: OEMB 00000000cffa8040 00073 (v01 062909 OEMB1125 20090629 MSFT 00000097)
- [ 0.000000] ACPI: HPET 00000000cff9c060 00038 (v01 062909 OEMHPET0 20090629 MSFT 00000097)
- [ 0.000000] ACPI: INFO 00000000cffa80c0 00124 (v01 062909 AMDINFO 20090629 MSFT 00000097)
- [ 0.000000] ACPI: NVHD 00000000cffa81f0 00554 (v01 062909 NVHDCP 20090629 MSFT 00000097)
- [ 0.000000] ACPI: SSDT 00000000cff9c0a0 0028A (v01 A M I POWERNOW 00000001 AMD 00000001)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] Scanning NUMA topology in Northbridge 24
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at 0000000000000000-0000000130000000
- [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
- [ 0.000000] NODE_DATA [0000000000015000 - 000000000001cfff]
- [ 0.000000] bootmap [000000000001d000 - 0000000000042fff] pages 26
- [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
- [ 0.000000] #2 [0001000000 - 0001686594] TEXT DATA BSS ==> [0001000000 - 0001686594]
- [ 0.000000] #3 [0036f18000 - 0037fef610] RAMDISK ==> [0036f18000 - 0037fef610]
- [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
- [ 0.000000] #5 [0001687000 - 000168728c] BRK ==> [0001687000 - 000168728c]
- [ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
- [ 0.000000] #7 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000]
- [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
- [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880001800000-ffff8800051fffff] on node 0
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] DMA32 0x00001000 -> 0x00100000
- [ 0.000000] Normal 0x00100000 -> 0x00130000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[3] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x000cff90
- [ 0.000000] 0: 0x00100000 -> 0x00130000
- [ 0.000000] On node 0 totalpages: 1048351
- [ 0.000000] DMA zone: 56 pages used for memmap
- [ 0.000000] DMA zone: 104 pages reserved
- [ 0.000000] DMA zone: 3823 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 14280 pages used for memmap
- [ 0.000000] DMA32 zone: 833480 pages, LIFO batch:31
- [ 0.000000] Normal zone: 2688 pages used for memmap
- [ 0.000000] Normal zone: 193920 pages, LIFO batch:31
- [ 0.000000] Detected use of extended apic ids on hypertransport bus
- [ 0.000000] ACPI: PM-Timer IO Port: 0x508
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] ACPI: IRQ14 used by override.
- [ 0.000000] ACPI: IRQ15 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
- [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 24
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
- [ 0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cffa8000
- [ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffe0000
- [ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
- [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
- [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
- [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
- [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
- [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
- [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
- [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005400000 s90328 r8192 d24360 u524288
- [ 0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031223
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=237575ca-80eb-4934-b9e2-ef8b5c27e28f ro quiet splash
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Node 0: aperture @ 20000000 size 32 MB
- [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
- [ 0.000000] Your BIOS doesn't leave a aperture memory hole
- [ 0.000000] Please enable the IOMMU option in the BIOS setup
- [ 0.000000] This costs you 64 MB of RAM
- [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
- [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
- [ 0.000000] Memory: 4043632k/4980736k available (3082k kernel code, 787332k absent, 149772k reserved, 1873k data, 592k init)
- [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:4352 nr_irqs:440
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2600.311 MHz processor.
- [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.62 BogoMIPS (lpj=10401244)
- [ 0.004025] Security Framework initialized
- [ 0.004030] SELinux: Disabled at boot.
- [ 0.004333] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.008390] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.009403] Mount-cache hash table entries: 256
- [ 0.009544] Initializing cgroup subsys ns
- [ 0.009547] Initializing cgroup subsys cpuacct
- [ 0.009550] Initializing cgroup subsys devices
- [ 0.009552] Initializing cgroup subsys freezer
- [ 0.009554] Initializing cgroup subsys net_cls
- [ 0.009577] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [ 0.009580] CPU: L2 Cache: 512K (64 bytes/line)
- [ 0.009582] CPU 0/0x0 -> Node 0
- [ 0.009583] tseg: 0000000000
- [ 0.009595] CPU: Physical Processor ID: 0
- [ 0.009596] CPU: Processor Core ID: 0
- [ 0.009598] mce: CPU supports 5 MCE banks
- [ 0.009608] using C1E aware idle routine
- [ 0.009610] Performance Events: AMD PMU driver.
- [ 0.009614] ... version: 0
- [ 0.009615] ... bit width: 48
- [ 0.009616] ... generic registers: 4
- [ 0.009618] ... value mask: 0000ffffffffffff
- [ 0.009619] ... max period: 00007fffffffffff
- [ 0.009621] ... fixed-purpose events: 0
- [ 0.009622] ... event mask: 000000000000000f
- [ 0.010192] ACPI: Core revision 20090903
- [ 0.020065] Setting APIC routing to flat
- [ 0.020534] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.060290] CPU0: AMD Athlon(tm) Dual Core Processor 5050e stepping 02
- [ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000
- [ 0.008000] Initializing CPU#1
- [ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [ 0.008000] CPU: L2 Cache: 512K (64 bytes/line)
- [ 0.008000] CPU 1/0x1 -> Node 0
- [ 0.008000] CPU: Physical Processor ID: 0
- [ 0.008000] CPU: Processor Core ID: 1
- [ 0.148030] CPU1: AMD Athlon(tm) Dual Core Processor 5050e stepping 02
- [ 0.148050] Brought up 2 CPUs
- [ 0.148052] Total of 2 processors activated (10400.58 BogoMIPS).
- [ 0.148400] CPU0 attaching sched-domain:
- [ 0.148404] domain 0: span 0-1 level MC
- [ 0.148406] groups: group ffff88000540fbf0 cpus 0 group ffff88000548fbf0 cpus 1
- [ 0.148412] CPU1 attaching sched-domain:
- [ 0.148414] domain 0: span 0-1 level MC
- [ 0.148416] groups: group ffff88000548fbf0 cpus 1 group ffff88000540fbf0 cpus 0
- [ 0.148475] devtmpfs: initialized
- [ 0.150749] regulator: core version 0.5
- [ 0.150749] NET: Registered protocol family 16
- [ 0.150749] node 0 link 0: io port [1000, ffffff]
- [ 0.150749] node 0 link 0: io port [1000, 1fff]
- [ 0.150749] TOM: 00000000d0000000 aka 3328M
- [ 0.150749] node 0 link 0: mmio [e0000000, efffffff]
- [ 0.150749] node 0 link 0: mmio [a0000, bffff]
- [ 0.150749] node 0 link 0: mmio [d0000000, fe0bffff]
- [ 0.150749] TOM2: 0000000130000000 aka 4864M
- [ 0.150749] bus: [00,07] on node 0 link 0
- [ 0.150749] bus: 00 index 0 io port: [0, ffff]
- [ 0.150749] bus: 00 index 1 mmio: [d0000000, ffffffff]
- [ 0.150749] bus: 00 index 2 mmio: [a0000, bffff]
- [ 0.150749] bus: 00 index 3 mmio: [130000000, fcffffffff]
- [ 0.150749] ACPI: bus type pci registered
- [ 0.150749] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- [ 0.150749] PCI: Not using MMCONFIG.
- [ 0.150749] PCI: Using configuration type 1 for base access
- [ 0.152160] bio: create slab <bio-0> at 0
- [ 0.152804] ACPI: EC: Look up EC in DSDT
- [ 0.159740] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.213058] ACPI: Interpreter enabled
- [ 0.213061] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.213082] ACPI: Using IOAPIC for interrupt routing
- [ 0.213143] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- [ 0.220475] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
- [ 0.228562] PCI: Using MMCONFIG at e0000000 - efffffff
- [ 0.244332] ACPI Warning: Incorrect checksum in table [OEMB] - 51, should be 48 (20090903/tbutils-314)
- [ 0.244605] ACPI: No dock devices found.
- [ 0.245033] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.245298] pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff]
- [ 0.245337] pci 0000:00:01.1: reg 10 io port: [0xe00-0xe3f]
- [ 0.245347] pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
- [ 0.245351] pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
- [ 0.245370] pci 0000:00:01.1: PME# supported from D3hot D3cold
- [ 0.245375] pci 0000:00:01.1: PME# disabled
- [ 0.245435] pci 0000:00:01.3: reg 10 32bit mmio: [0xf7e80000-0xf7efffff]
- [ 0.245559] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7e7e000-0xf7e7efff]
- [ 0.245581] pci 0000:00:02.0: supports D1 D2
- [ 0.245582] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.245585] pci 0000:00:02.0: PME# disabled
- [ 0.245608] pci 0000:00:02.1: reg 10 32bit mmio: [0xf7e7fc00-0xf7e7fcff]
- [ 0.245634] pci 0000:00:02.1: supports D1 D2
- [ 0.245635] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.245638] pci 0000:00:02.1: PME# disabled
- [ 0.245665] pci 0000:00:04.0: reg 10 32bit mmio: [0xf7e7d000-0xf7e7dfff]
- [ 0.245686] pci 0000:00:04.0: supports D1 D2
- [ 0.245688] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.245690] pci 0000:00:04.0: PME# disabled
- [ 0.245713] pci 0000:00:04.1: reg 10 32bit mmio: [0xf7e7f800-0xf7e7f8ff]
- [ 0.245739] pci 0000:00:04.1: supports D1 D2
- [ 0.245741] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.245744] pci 0000:00:04.1: PME# disabled
- [ 0.245771] pci 0000:00:07.0: reg 10 32bit mmio: [0xf7e78000-0xf7e7bfff]
- [ 0.245792] pci 0000:00:07.0: PME# supported from D3hot D3cold
- [ 0.245795] pci 0000:00:07.0: PME# disabled
- [ 0.245850] pci 0000:00:09.0: reg 10 io port: [0xc080-0xc087]
- [ 0.245853] pci 0000:00:09.0: reg 14 io port: [0xc000-0xc003]
- [ 0.245857] pci 0000:00:09.0: reg 18 io port: [0xbc00-0xbc07]
- [ 0.245860] pci 0000:00:09.0: reg 1c io port: [0xb880-0xb883]
- [ 0.245863] pci 0000:00:09.0: reg 20 io port: [0xb800-0xb80f]
- [ 0.245867] pci 0000:00:09.0: reg 24 32bit mmio: [0xf7e76000-0xf7e77fff]
- [ 0.245904] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf7e7c000-0xf7e7cfff]
- [ 0.245908] pci 0000:00:0a.0: reg 14 io port: [0xb480-0xb487]
- [ 0.245911] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf7e7f400-0xf7e7f4ff]
- [ 0.245915] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf7e7f000-0xf7e7f00f]
- [ 0.245934] pci 0000:00:0a.0: supports D1 D2
- [ 0.245935] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.245939] pci 0000:00:0a.0: PME# disabled
- [ 0.246185] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.246192] pci 0000:00:10.0: PME# disabled
- [ 0.246467] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.246475] pci 0000:00:13.0: PME# disabled
- [ 0.246747] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.246754] pci 0000:00:14.0: PME# disabled
- [ 0.246887] pci 0000:01:0a.0: reg 10 32bit mmio: [0xf7fff800-0xf7ffffff]
- [ 0.246892] pci 0000:01:0a.0: reg 14 io port: [0xdc00-0xdc7f]
- [ 0.246923] pci 0000:01:0a.0: supports D2
- [ 0.246925] pci 0000:01:0a.0: PME# supported from D2 D3hot D3cold
- [ 0.246928] pci 0000:01:0a.0: PME# disabled
- [ 0.246954] pci 0000:00:08.0: transparent bridge
- [ 0.246957] pci 0000:00:08.0: bridge io port: [0xd000-0xdfff]
- [ 0.246960] pci 0000:00:08.0: bridge 32bit mmio: [0xf7f00000-0xf7ffffff]
- [ 0.246993] pci 0000:02:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
- [ 0.247000] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
- [ 0.247007] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
- [ 0.247011] pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f]
- [ 0.247016] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfaf80000-0xfaffffff]
- [ 0.252101] pci 0000:00:10.0: bridge io port: [0xe000-0xefff]
- [ 0.252109] pci 0000:00:10.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
- [ 0.252122] pci 0000:00:10.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
- [ 0.252299] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.252598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- [ 0.252722] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT]
- [ 0.252796] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
- [ 0.252864] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
- [ 0.270016] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
- [ 0.270277] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
- [ 0.270537] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
- [ 0.270799] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *15
- [ 0.271061] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
- [ 0.271319] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
- [ 0.271579] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
- [ 0.271838] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
- [ 0.272109] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
- [ 0.272369] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
- [ 0.272629] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
- [ 0.272888] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
- [ 0.273151] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
- [ 0.273412] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
- [ 0.273673] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
- [ 0.273933] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
- [ 0.274197] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *11
- [ 0.274457] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
- [ 0.274717] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
- [ 0.274977] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
- [ 0.275241] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *15
- [ 0.275500] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
- [ 0.275760] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
- [ 0.276032] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
- [ 0.276293] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
- [ 0.276553] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
- [ 0.276815] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
- [ 0.277075] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
- [ 0.277335] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
- [ 0.277598] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
- [ 0.277859] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
- [ 0.278119] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
- [ 0.278379] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
- [ 0.278641] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
- [ 0.278902] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
- [ 0.279164] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
- [ 0.279428] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
- [ 0.279694] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
- [ 0.279962] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
- [ 0.280242] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
- [ 0.280502] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
- [ 0.280766] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *7
- [ 0.281030] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *14
- [ 0.281293] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
- [ 0.281598] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
- [ 0.281863] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *14
- [ 0.282127] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *15
- [ 0.282254] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.282256] vgaarb: loaded
- [ 0.282276] PCI: Using ACPI for IRQ routing
- [ 0.282276] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.282276] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
- [ 0.282276] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
- [ 0.288032] Switching to clocksource hpet
- [ 0.288946] pnp: PnP ACPI init
- [ 0.288964] ACPI: bus type pnp registered
- [ 0.297035] pnp: PnP ACPI: found 13 devices
- [ 0.297037] ACPI: ACPI bus type pnp unregistered
- [ 0.297049] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
- [ 0.297051] system 00:05: ioport range 0x800-0x80f has been reserved
- [ 0.297054] system 00:05: ioport range 0x500-0x57f has been reserved
- [ 0.297056] system 00:05: ioport range 0x580-0x5ff has been reserved
- [ 0.297059] system 00:05: ioport range 0x800-0x87f could not be reserved
- [ 0.297061] system 00:05: ioport range 0x880-0x8ff has been reserved
- [ 0.297064] system 00:05: ioport range 0xd00-0xd7f has been reserved
- [ 0.297066] system 00:05: ioport range 0xd80-0xdff has been reserved
- [ 0.297070] system 00:05: iomem range 0xfed04000-0xfed04fff has been reserved
- [ 0.297072] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved
- [ 0.297078] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 0.297080] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
- [ 0.297085] system 00:09: ioport range 0x230-0x23f has been reserved
- [ 0.297087] system 00:09: ioport range 0x290-0x29f has been reserved
- [ 0.297090] system 00:09: ioport range 0xa00-0xa0f has been reserved
- [ 0.297092] system 00:09: ioport range 0xa10-0xa1f has been reserved
- [ 0.297097] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
- [ 0.297101] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
- [ 0.297104] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
- [ 0.297106] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
- [ 0.297109] system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved
- [ 0.297111] system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved
- [ 0.301911] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
- [ 0.301914] pci 0000:00:08.0: IO window: 0xd000-0xdfff
- [ 0.301918] pci 0000:00:08.0: MEM window: 0xf7f00000-0xf7ffffff
- [ 0.301920] pci 0000:00:08.0: PREFETCH window: disabled
- [ 0.301924] pci 0000:00:10.0: PCI bridge, secondary bus 0000:02
- [ 0.301929] pci 0000:00:10.0: IO window: 0xe000-0xefff
- [ 0.301938] pci 0000:00:10.0: MEM window: 0xf8000000-0xfbffffff
- [ 0.301945] pci 0000:00:10.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
- [ 0.301957] pci 0000:00:13.0: PCI bridge, secondary bus 0000:03
- [ 0.301959] pci 0000:00:13.0: IO window: disabled
- [ 0.301968] pci 0000:00:13.0: MEM window: disabled
- [ 0.301975] pci 0000:00:13.0: PREFETCH window: disabled
- [ 0.301987] pci 0000:00:14.0: PCI bridge, secondary bus 0000:04
- [ 0.301989] pci 0000:00:14.0: IO window: disabled
- [ 0.301998] pci 0000:00:14.0: MEM window: disabled
- [ 0.302004] pci 0000:00:14.0: PREFETCH window: disabled
- [ 0.302021] pci 0000:00:08.0: setting latency timer to 64
- [ 0.302397] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
- [ 0.302401] alloc irq_desc for 19 on node 0
- [ 0.302403] alloc kstat_irqs on node 0
- [ 0.302411] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
- [ 0.302419] pci 0000:00:10.0: setting latency timer to 64
- [ 0.302781] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 18
- [ 0.302783] alloc irq_desc for 18 on node 0
- [ 0.302785] alloc kstat_irqs on node 0
- [ 0.302791] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 18 (level, low) -> IRQ 18
- [ 0.302799] pci 0000:00:13.0: setting latency timer to 64
- [ 0.303159] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 17
- [ 0.303162] alloc irq_desc for 17 on node 0
- [ 0.303163] alloc kstat_irqs on node 0
- [ 0.303170] pci 0000:00:14.0: PCI INT A -> Link[LN4A] -> GSI 17 (level, low) -> IRQ 17
- [ 0.303178] pci 0000:00:14.0: setting latency timer to 64
- [ 0.303184] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.303186] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
- [ 0.303188] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
- [ 0.303190] pci_bus 0000:01: resource 1 mem: [0xf7f00000-0xf7ffffff]
- [ 0.303192] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
- [ 0.303194] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
- [ 0.303197] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
- [ 0.303199] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfbffffff]
- [ 0.303201] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
- [ 0.303233] NET: Registered protocol family 2
- [ 0.303377] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.304767] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- [ 0.308567] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.309053] TCP: Hash tables configured (established 524288 bind 65536)
- [ 0.309056] TCP reno registered
- [ 0.309159] NET: Registered protocol family 1
- [ 0.488127] pci 0000:00:08.0: Enabling HT MSI Mapping
- [ 0.488225] pci 0000:00:09.0: Enabling HT MSI Mapping
- [ 0.488329] pci 0000:00:0a.0: Enabling HT MSI Mapping
- [ 0.488509] pci 0000:02:00.0: Boot video device
- [ 0.488556] Unpacking initramfs...
- [ 0.840765] Freeing initrd memory: 17245k freed
- [ 0.850785] PCI-DMA: Disabling AGP.
- [ 0.850868] PCI-DMA: aperture base @ 20000000 size 65536 KB
- [ 0.850870] PCI-DMA: using GART IOMMU.
- [ 0.850873] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
- [ 0.851640] audit: initializing netlink socket (disabled)
- [ 0.851651] type=2000 audit(1327663086.848:1): initialized
- [ 0.854390] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.855970] VFS: Disk quotas dquot_6.5.2
- [ 0.856037] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.856114] msgmni has been set to 7931
- [ 0.856343] alg: No test for stdrng (krng)
- [ 0.856409] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.856412] io scheduler noop registered
- [ 0.856414] io scheduler anticipatory registered
- [ 0.856415] io scheduler deadline registered
- [ 0.856444] io scheduler cfq registered (default)
- [ 0.856775] alloc irq_desc for 24 on node 0
- [ 0.856777] alloc kstat_irqs on node 0
- [ 0.856797] pcieport 0000:00:10.0: irq 24 for MSI/MSI-X
- [ 0.856817] pcieport 0000:00:10.0: setting latency timer to 64
- [ 0.857230] alloc irq_desc for 25 on node 0
- [ 0.857231] alloc kstat_irqs on node 0
- [ 0.857247] pcieport 0000:00:13.0: irq 25 for MSI/MSI-X
- [ 0.857265] pcieport 0000:00:13.0: setting latency timer to 64
- [ 0.857658] alloc irq_desc for 26 on node 0
- [ 0.857660] alloc kstat_irqs on node 0
- [ 0.857676] pcieport 0000:00:14.0: irq 26 for MSI/MSI-X
- [ 0.857694] pcieport 0000:00:14.0: setting latency timer to 64
- [ 0.859324] Linux agpgart interface v0.103
- [ 0.859369] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.859463] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.859751] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.859879] input: Macintosh mouse button emulation as /devices/virtual/input/input0
- [ 0.859934] PNP: No PS/2 controller found. Probing ports directly.
- [ 0.860361] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.860367] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.860452] mice: PS/2 mouse device common for all mice
- [ 0.860515] rtc_cmos 00:07: RTC can wake from S4
- [ 0.860552] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
- [ 0.860605] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
- [ 0.860615] cpuidle: using governor ladder
- [ 0.860617] cpuidle: using governor menu
- [ 0.860621] No iBFT detected.
- [ 0.860886] TCP cubic registered
- [ 0.860996] NET: Registered protocol family 10
- [ 0.861643] Mobile IPv6
- [ 0.861646] NET: Registered protocol family 17
- [ 0.861726] PM: Resume from disk failed.
- [ 0.861736] registered taskstats version 1
- [ 0.862286] rtc_cmos 00:07: setting system clock to 2012-01-27 11:18:07 UTC (1327663087)
- [ 0.862331] Initalizing network drop monitor service
- [ 0.862360] Freeing unused kernel memory: 592k freed
- [ 0.862634] Write protecting the kernel read-only data: 4220k
- [ 0.878976] udev[82]: starting version 164
- [ 0.986194] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
- [ 0.986202] ACPI: Power Button [PWRB]
- [ 0.986278] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- [ 0.986282] ACPI: Power Button [PWRF]
- [ 0.991331] usbcore: registered new interface driver usbfs
- [ 0.991442] usbcore: registered new interface driver hub
- [ 0.991578] usbcore: registered new device driver usb
- [ 1.000267] SCSI subsystem initialized
- [ 1.001802] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.001864] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
- [ 1.002312] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
- [ 1.002317] alloc irq_desc for 23 on node 0
- [ 1.002319] alloc kstat_irqs on node 0
- [ 1.002329] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
- [ 1.002333] forcedeth 0000:00:0a.0: setting latency timer to 64
- [ 1.011615] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 16
- [ 1.011621] alloc irq_desc for 16 on node 0
- [ 1.011623] alloc kstat_irqs on node 0
- [ 1.011633] firewire_ohci 0000:01:0a.0: PCI INT A -> Link[LNKD] -> GSI 16 (level, low) -> IRQ 16
- [ 1.028113] FDC 0 is a post-1991 82077
- [ 1.028625] libata version 3.00 loaded.
- [ 1.059625] nvidia: module license 'NVIDIA' taints kernel.
- [ 1.059629] Disabling lock debugging due to kernel taint
- [ 1.415920] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:24:8c:60:3f:42
- [ 1.415924] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
- [ 1.421699] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
- [ 1.421705] alloc irq_desc for 22 on node 0
- [ 1.421707] alloc kstat_irqs on node 0
- [ 1.421718] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
- [ 1.421752] ehci_hcd 0000:00:02.1: setting latency timer to 64
- [ 1.421755] ehci_hcd 0000:00:02.1: EHCI Host Controller
- [ 1.421787] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
- [ 1.421818] ehci_hcd 0000:00:02.1: debug port 1
- [ 1.421826] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
- [ 1.421845] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf7e7fc00
- [ 1.428018] firewire_ohci: Added fw-ohci device 0000:01:0a.0, OHCI version 1.10
- [ 1.432021] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
- [ 1.432046] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.432048] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.432050] usb usb1: Product: EHCI Host Controller
- [ 1.432052] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
- [ 1.432054] usb usb1: SerialNumber: 0000:00:02.1
- [ 1.432156] usb usb1: configuration #1 chosen from 1 choice
- [ 1.432205] hub 1-0:1.0: USB hub found
- [ 1.432214] hub 1-0:1.0: 6 ports detected
- [ 1.432316] ahci 0000:00:09.0: version 3.0
- [ 1.432749] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
- [ 1.432754] alloc irq_desc for 21 on node 0
- [ 1.432756] alloc kstat_irqs on node 0
- [ 1.432766] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
- [ 1.432812] alloc irq_desc for 27 on node 0
- [ 1.432814] alloc kstat_irqs on node 0
- [ 1.432821] ahci 0000:00:09.0: irq 27 for MSI/MSI-X
- [ 1.432888] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
- [ 1.432892] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio boh
- [ 1.432895] ahci 0000:00:09.0: setting latency timer to 64
- [ 1.433373] scsi0 : ahci
- [ 1.433570] scsi1 : ahci
- [ 1.433652] scsi2 : ahci
- [ 1.433729] scsi3 : ahci
- [ 1.433805] scsi4 : ahci
- [ 1.433886] scsi5 : ahci
- [ 1.434036] ata1: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76100 irq 27
- [ 1.434039] ata2: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76180 irq 27
- [ 1.434041] ata3: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76200 irq 27
- [ 1.434044] ata4: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76280 irq 27
- [ 1.434046] ata5: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76300 irq 27
- [ 1.434049] ata6: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76380 irq 27
- [ 1.434721] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
- [ 1.434726] alloc irq_desc for 20 on node 0
- [ 1.434728] alloc kstat_irqs on node 0
- [ 1.434738] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 20 (level, low) -> IRQ 20
- [ 1.434762] ehci_hcd 0000:00:04.1: setting latency timer to 64
- [ 1.434765] ehci_hcd 0000:00:04.1: EHCI Host Controller
- [ 1.434778] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
- [ 1.434807] ehci_hcd 0000:00:04.1: debug port 1
- [ 1.434814] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
- [ 1.434834] ehci_hcd 0000:00:04.1: irq 20, io mem 0xf7e7f800
- [ 1.444015] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
- [ 1.444038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.444040] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.444043] usb usb2: Product: EHCI Host Controller
- [ 1.444044] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
- [ 1.444046] usb usb2: SerialNumber: 0000:00:04.1
- [ 1.444123] usb usb2: configuration #1 chosen from 1 choice
- [ 1.444151] hub 2-0:1.0: USB hub found
- [ 1.444159] hub 2-0:1.0: 6 ports detected
- [ 1.486928] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.487402] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
- [ 1.487407] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
- [ 1.487435] ohci_hcd 0000:00:02.0: setting latency timer to 64
- [ 1.487438] ohci_hcd 0000:00:02.0: OHCI Host Controller
- [ 1.487453] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
- [ 1.487486] ohci_hcd 0000:00:02.0: irq 23, io mem 0xf7e7e000
- [ 1.542015] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.542019] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.542021] usb usb3: Product: OHCI Host Controller
- [ 1.542023] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
- [ 1.542024] usb usb3: SerialNumber: 0000:00:02.0
- [ 1.542154] usb usb3: configuration #1 chosen from 1 choice
- [ 1.542202] hub 3-0:1.0: USB hub found
- [ 1.542212] hub 3-0:1.0: 6 ports detected
- [ 1.542727] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 22
- [ 1.542731] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 22 (level, low) -> IRQ 22
- [ 1.542762] ohci_hcd 0000:00:04.0: setting latency timer to 64
- [ 1.542764] ohci_hcd 0000:00:04.0: OHCI Host Controller
- [ 1.542915] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
- [ 1.542932] ohci_hcd 0000:00:04.0: irq 22, io mem 0xf7e7d000
- [ 1.598011] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.598014] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.598016] usb usb4: Product: OHCI Host Controller
- [ 1.598017] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
- [ 1.598019] usb usb4: SerialNumber: 0000:00:04.0
- [ 1.598140] usb usb4: configuration #1 chosen from 1 choice
- [ 1.598190] hub 4-0:1.0: USB hub found
- [ 1.598199] hub 4-0:1.0: 6 ports detected
- [ 1.668371] nvidia 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
- [ 1.668379] nvidia 0000:02:00.0: setting latency timer to 64
- [ 1.668383] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 1.668618] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.31 Thu Jun 3 08:19:50 PDT 2010
- [ 1.752025] ata6: SATA link down (SStatus 0 SControl 300)
- [ 1.752044] ata5: SATA link down (SStatus 0 SControl 300)
- [ 1.916022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.916030] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.916035] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.916046] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.916178] ata1.00: ATA-7: STT_FTM32GX25H, 1275, max UDMA/133
- [ 1.916181] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 1.916369] ata1.00: configured for UDMA/133
- [ 1.916480] scsi 0:0:0:0: Direct-Access ATA STT_FTM32GX25H 1275 PQ: 0 ANSI: 5
- [ 1.916736] ata3.00: ATA-8: WDC WD10EACS-00D6B1, 01.01A01, max UDMA/133
- [ 1.916739] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 1.917515] ata3.00: configured for UDMA/133
- [ 1.918861] ata4.00: ATA-8: WDC WD15EARS-00Z5B1, 80.00A80, max UDMA/133
- [ 1.918863] ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 1.920590] ata2.00: ATAPI: HL-DT-ST BDDVDRW GGC-H20L, 1.03, max UDMA/133
- [ 1.922234] ata4.00: configured for UDMA/133
- [ 1.926030] ata2.00: configured for UDMA/133
- [ 1.928565] firewire_core: created device fw0: GUID 001e8c0001d1da3f, S400
- [ 2.037546] scsi 1:0:0:0: CD-ROM HL-DT-ST BDDVDRW GGC-H20L 1.03 PQ: 0 ANSI: 5
- [ 2.037729] scsi 2:0:0:0: Direct-Access ATA WDC WD10EACS-00D 01.0 PQ: 0 ANSI: 5
- [ 2.037934] scsi 3:0:0:0: Direct-Access ATA WDC WD15EARS-00Z 80.0 PQ: 0 ANSI: 5
- [ 2.048793] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
- [ 2.048839] sd 0:0:0:0: [sda] Write Protect is off
- [ 2.048842] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.048859] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.048991] sda: sda1 sda2 sda3
- [ 2.049744] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 2.052343] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- [ 2.052403] sd 3:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
- [ 2.052423] sd 2:0:0:0: [sdb] Write Protect is off
- [ 2.052426] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 2.052447] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.052458] sd 3:0:0:0: [sdc] Write Protect is off
- [ 2.052460] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 2.052479] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.052640] sdb:
- [ 2.052677] sdc: sdb1
- [ 2.059122] sd 2:0:0:0: [sdb] Attached SCSI disk
- [ 2.076381] sdc1
- [ 2.076545] sd 3:0:0:0: [sdc] Attached SCSI disk
- [ 2.092049] usb 3-1: new full speed USB device using ohci_hcd and address 2
- [ 2.369038] usb 3-1: New USB device found, idVendor=0a12, idProduct=0001
- [ 2.369042] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.369128] usb 3-1: configuration #1 chosen from 1 choice
- [ 2.400602] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 2.400605] Uniform CD-ROM driver Revision: 3.20
- [ 2.400694] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 2.404519] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 2.404552] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 2.404582] sd 2:0:0:0: Attached scsi generic sg2 type 0
- [ 2.404612] sd 3:0:0:0: Attached scsi generic sg3 type 0
- [ 2.676017] usb 3-5: new low speed USB device using ohci_hcd and address 3
- [ 2.880030] usb 3-5: New USB device found, idVendor=15c2, idProduct=0038
- [ 2.880033] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.880113] usb 3-5: configuration #1 chosen from 1 choice
- [ 2.893137] usbcore: registered new interface driver hiddev
- [ 2.893199] usbcore: registered new interface driver usbhid
- [ 2.893306] usbhid: v2.6:USB HID core driver
- [ 3.104525] usb 2-5: new high speed USB device using ehci_hcd and address 3
- [ 3.129477] [drm] Initialized drm 1.1.0 20060810
- [ 3.240865] usb 2-5: New USB device found, idVendor=05e3, idProduct=070e
- [ 3.240868] usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=2
- [ 3.240871] usb 2-5: Product: USB Storage
- [ 3.240872] usb 2-5: SerialNumber: 000000009602
- [ 3.240956] usb 2-5: configuration #1 chosen from 1 choice
- [ 3.247792] Initializing USB Mass Storage driver...
- [ 3.247915] scsi6 : SCSI emulation for USB Mass Storage devices
- [ 3.248022] usbcore: registered new interface driver usb-storage
- [ 3.248025] USB Mass Storage support registered.
- [ 3.248476] usb-storage: device found at 3
- [ 3.248478] usb-storage: waiting for device to settle before scanning
- [ 3.249761] PM: Starting manual resume from disk
- [ 3.249765] PM: Resume from partition 8:2
- [ 3.249766] PM: Checking hibernation image.
- [ 3.249884] PM: Error -22 checking image file
- [ 3.249886] PM: Resume from disk failed.
- [ 3.271402] EXT4-fs (sda1): mounted filesystem with ordered data mode
- [ 3.494059] udev[517]: starting version 164
- [ 3.544050] usb 4-1: new full speed USB device using ohci_hcd and address 2
- [ 3.557357] input: PC Speaker as /devices/platform/pcspkr/input/input3
- [ 3.616487] processor LNXCPU:00: registered as cooling_device0
- [ 3.616576] processor LNXCPU:01: registered as cooling_device1
- [ 3.625859] EDAC MC: Ver: 2.1.0 Jan 9 2012
- [ 3.641316] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
- [ 3.657650] i2c i2c-0: nForce2 SMBus adapter at 0x600
- [ 3.657655] ACPI: I/O resource nForce2_smbus [0x700-0x73f] conflicts with ACPI region SM00 [0x700-0x73f]
- [ 3.657657] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 3.657660] nForce2_smbus 0000:00:01.1: Error probing SMB2.
- [ 3.661322] ACPI: WMI: Mapper loaded
- [ 3.672242] EDAC amd64_edac: Ver: 3.2.0 Jan 9 2012
- [ 3.683802] Bluetooth: Core ver 2.15
- [ 3.687266] NET: Registered protocol family 31
- [ 3.687268] Bluetooth: HCI device and connection manager initialized
- [ 3.687271] Bluetooth: HCI socket layer initialized
- [ 3.693171] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
- [ 3.693180] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- [ 3.693181] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- [ 3.693182] (Note that use of the override may cause unknown side effects.)
- [ 3.693201] amd64_edac: probe of 0000:00:18.2 failed with error -22
- [ 3.697600] Bluetooth: Generic Bluetooth USB driver ver 0.6
- [ 3.697707] usbcore: registered new interface driver btusb
- [ 3.768565] usb 4-1: New USB device found, idVendor=046d, idProduct=c52b
- [ 3.768569] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.768572] usb 4-1: Product: USB Receiver
- [ 3.768573] usb 4-1: Manufacturer: Logitech
- [ 3.768662] usb 4-1: configuration #1 chosen from 1 choice
- [ 3.768997] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
- [ 3.769037] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
- [ 3.769422] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
- [ 3.769427] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
- [ 3.769430] hda_intel: Disable MSI for Nvidia chipset
- [ 3.769511] HDA Intel 0000:00:07.0: setting latency timer to 64
- [ 3.780812] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.0/input/input4
- [ 3.780891] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:04.0-1/input0
- [ 3.787976] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.1/input/input5
- [ 3.788196] generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:04.0-1/input1
- [ 3.799608] generic-usb 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-1/input2
- [ 5.183390] Adding 3919852k swap on /dev/sda2. Priority:-1 extents:1 across:3919852k
- [ 5.250981] loop: module loaded
- [ 5.325694] EXT4-fs (sda3): mounted filesystem with ordered data mode
- [ 5.732437] alloc irq_desc for 28 on node 0
- [ 5.732441] alloc kstat_irqs on node 0
- [ 5.732451] forcedeth 0000:00:0a.0: irq 28 for MSI/MSI-X
- [ 7.241670] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input6
- [ 8.248908] usb-storage: device scan complete
- [ 8.251136] scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
- [ 8.251752] scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
- [ 8.252375] scsi 6:0:0:2: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
- [ 8.252999] scsi 6:0:0:3: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
- [ 8.253847] sd 6:0:0:0: Attached scsi generic sg4 type 0
- [ 8.254068] sd 6:0:0:1: Attached scsi generic sg5 type 0
- [ 8.254517] sd 6:0:0:2: Attached scsi generic sg6 type 0
- [ 8.254741] sd 6:0:0:3: Attached scsi generic sg7 type 0
- [ 8.260755] sd 6:0:0:0: [sdd] Attached SCSI removable disk
- [ 8.261449] sd 6:0:0:3: [sdg] Attached SCSI removable disk
- [ 8.262003] sd 6:0:0:1: [sde] Attached SCSI removable disk
- [ 8.262750] sd 6:0:0:2: [sdf] Attached SCSI removable disk
- [ 12.969272] CPU0 attaching NULL sched-domain.
- [ 12.969279] CPU1 attaching NULL sched-domain.
- [ 12.992076] CPU0 attaching sched-domain:
- [ 12.992080] domain 0: span 0-1 level MC
- [ 12.992082] groups: group ffff88000540fbf0 cpus 0 group ffff88000548fbf0 cpus 1
- [ 12.992090] CPU1 attaching sched-domain:
- [ 12.992091] domain 0: span 0-1 level MC
- [ 12.992093] groups: group ffff88000548fbf0 cpus 1 group ffff88000540fbf0 cpus 0
- [ 16.160515] eth0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement