API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Apr 8th, 2013
91
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 32.00 KB | None | 0 0
raw download clone embed print report
  1. RM696-21-3_PR_005:~# dmesg [393/459]
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 2.6.32.54-dfl61-20121301 (juice@alaspin) (gcc version 4.4.1 ('cs2009q3-hard-67-sb16') ) #1 PREEMPT Sat Mar 2 23:11:21
  4. EET 2013
  5. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
  6. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  7. [ 0.000000] Machine: Nokia RM-696 board
  8. [ 0.000000] Reserving 14680064 bytes SDRAM for VRAM
  9. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  10. [ 0.000000] OMAP3630 ES1.2-hs (l2cache iva sgx neon isp 192mhz_clk )
  11. [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
  12. [ 0.000000] On node 0 totalpages: 257024
  13. [ 0.000000] free_area_init_node: node 0, pgdat b05126e8, node_mem_map b054f000
  14. [ 0.000000] Normal zone: 2048 pages used for memmap
  15. [ 0.000000] Normal zone: 0 pages reserved
  16. [ 0.000000] Normal zone: 254976 pages, LIFO batch:31
  17. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254976
  18. [ 0.000000] Kernel command line: init=/sbin/preinit_harmattan root=/dev/mmcblk0p2 rootwait rootflags=errors=remount-ro rootfstype=ext4 rw mtdoo
  19. ps.mtddev=log mtdoops.record_size=65536 console=tty0 mtdparts=omap2-onenand:1024k(bootloader),2816k@1024k(config),16384k@3840k(kernel),2048k@20224
  20. k(log),469248k@22272k(var),32768k@491520k(moslo) bootreason=pwr_key bootmode=normal nolo=2.3.6 product_name=RM-696 dbi-type=V5JW dbi-vendor=1 dbi-
  21. size=73 dbi-uid=01404352520027004C04 imei=357923046202760 g_nokia.iSerialNumber=357923046202760 serialnumber=CQJ073999 omap_sec.kci=958 gpio=cmt_a
  22. peslpx:93:sysfs:output,cmt_en:23:sysfs:init_active:output,cmt_rst_rq:88:sysfs:init_active:output,sleep_ind:92:sysfs:output omapdss.def_disp_enable
  23. d=1 vhash=285e93eebfdded180a3ffdf0a42c0d09b0d8ce8a product_model=N9 hwid=1603
  24. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  25. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  26. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  27. [ 0.000000] allocated 5242880 bytes of page_cgroup
  28. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  29. [ 0.000000] Memory: 1002MB 2MB = 1004MB total
  30. [ 0.000000] Memory: 1008256KB available (4652K code, 464K data, 152K init, 0K highmem)
  31. [ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  32. [ 0.000000] Hierarchical RCU implementation.
  33. [ 0.000000] NR_IRQS:402
  34. [ 0.000000] Clocking rate (Crystal/Core/MPU): 38.4/390/600 MHz
  35. [ 0.000000] Reprogramming SDRC clock to 390400000 Hz
  36. [ 0.000000] GPMC revision 5.0
  37. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  38. [ 0.000000] Total of 96 interrupts on 1 active controller
  39. [ 0.000000] OMAP GPIO hardware version 2.5
  40. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  41. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  42. [ 0.000000] Console: colour dummy device 80x30
  43. [ 0.000000] console [tty0] enabled
  44. [ 0.000762] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
  45. [ 0.039215] Security Framework initialized
  46. [ 0.039276] Aegis: init vhash=285e93eebfdded180a3ffdf0a42c0d09b0d8ce8a
  47. [ 0.039428] Mount-cache hash table entries: 512
  48. [ 0.039794] Initializing cgroup subsys memory
  49. [ 0.039855] Initializing cgroup subsys freezer
  50. [ 0.039916] CPU: Testing write buffer coherency: ok
  51. [ 0.040435] devtmpfs: initialized
  52. [ 0.044799] regulator: core version 0.5
  53. [ 0.044982] NET: Registered protocol family 16
  54. [ 0.045776] RM-696 board, rev 1603
  55. [ 0.046783] MUX: setup H16_34XX_SDRC_CKE0 (0xfa002262): 0x0100 -> 0x0000
  56. [ 0.046813] MUX: setup H17_34XX_SDRC_CKE1 (0xfa002264): 0x0100 -> 0x0000
  57. [ 0.046844] SmartReflex class 1.5 driver: initialized
  58. [ 0.049102] OMAP DMA hardware revision 5.0
  59. [ 0.049194] Reserving DMA channels 0 and 1 for HS ROM code
  60. [ 0.052062] bio: create slab <bio-0> at 0
  61. [ 0.052551] regulator: VSDIO: 1800 mV normal standby
  62. [ 0.052673] regulator: vbat: 3700 mV
  63. [ 0.052825] regulator: VEMMC: 2900 mV normal standby
  64. [ 0.054077] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2900 kHz
  65. [ 0.069122] twl4030: PIH (irq 7) chaining IRQs 368..375
  66. [ 0.069183] twl4030: power (irq 373) chaining IRQs 376..383
  67. [ 0.069610] twl4030: gpio (irq 368) chaining IRQs 384..401
  68. [ 0.070465] regulator: VUSB1V5: 1500 mV normal standby
  69. [ 0.070678] regulator: VUSB1V8: 1800 mV normal standby
  70. [ 0.070861] regulator: VUSB3V1: 3100 mV normal standby
  71. [ 0.072052] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  72. [ 0.072814] regulator: VPLL1: 1800 mV normal standby
  73. [ 0.074218] regulator: VIO: 1800 mV normal standby
  74. [ 0.074462] regulator: VMMC1: 1850 <--> 3150 mV normal standby
  75. [ 0.074737] regulator: VDAC: 1800 mV normal standby
  76. [ 0.075073] regulator: VAUX2: 1800 mV normal standby
  77. [ 0.075500] regulator: VINTANA1: 1500 mV normal standby
  78. [ 0.076019] regulator: VINTANA2: 2750 mV normal standby
  79. [ 0.076477] regulator: VINTDIG: 1500 mV normal standby
  80. [ 0.076751] regulator: VPLL2: 1800 mV normal standby
  81. [ 0.077056] regulator: VMMC2: 3000 mV normal standby
  82. [ 0.077362] regulator: VSIM: 1800 mV normal standby
  83. [ 0.077667] regulator: VAUX1: 2800 mV normal standby
  84. [ 0.078002] regulator: VAUX3: 2800 mV normal standby
  85. [ 0.078338] regulator: VAUX4: 2800 mV normal standby
  86. [ 0.078735] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
  87. [ 0.086090] i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz
  88. [ 0.087371] Bluetooth: Core ver 2.15
  89. [ 0.087524] NET: Registered protocol family 31
  90. [ 0.087554] Bluetooth: HCI device and connection manager initialized
  91. [ 0.087585] Bluetooth: HCI socket layer initialized
  92. [ 0.087860] cfg80211: Calling CRDA to update world regulatory domain
  93. [ 0.088043] Switching to clocksource 32k_counter
  94. [ 0.088836] musb_hdrc: version 6.0, musb-dma, peripheral, debug=0
  95. [ 0.088958] HS USB OTG: revision 0x40, sysconfig 0x2015, sysstatus 0x1, intrfsel 0x1, simenable 0x0
  96. [ 0.089019] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
  97. [ 0.089019] musb_hdrc: MHDRC RTL version 1.800
  98. [ 0.089050] musb_hdrc: 18/31 max ep, 14592/16384 memory
  99. [ 0.089080] musb_hdrc: USB Peripheral mode controller at fa0ab000 using DMA, IRQ 92
  100. [ 0.089508] NET: Registered protocol family 2
  101. [ 0.089660] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  102. [ 0.090026] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  103. [ 0.093383] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
  104. [ 0.094818] TCP: Hash tables configured (established 131072 bind 65536)
  105. [ 0.094848] TCP reno registered
  106. [ 0.095001] NET: Registered protocol family 1
  107. [ 0.095550] dspbridge_init: 600000 bytes @ bea00000
  108. [ 0.095672] hs_init: omap_hs driver
  109. [ 0.096466] sec_init: omap_sec driver
  110. [ 0.105804] fuse init (API version 7.13)
  111. [ 0.106292] msgmni has been set to 1969
  112. [ 0.106536] Aegis: Netlink socket created
  113. [ 0.106597] restok: ready
  114. [ 0.106628] creds: ready
  115. [ 0.106658] credp: active
  116. [ 0.109313] io scheduler noop registered
  117. [ 0.109375] io scheduler anticipatory registered
  118. [ 0.109375] io scheduler deadline registered
  119. [ 0.109680] io scheduler cfq registered (default)
  120. [ 0.110168] OMAP DSS rev 2.0
  121. [ 0.110260] OMAP DISPC rev 3.0
  122. [ 0.110321] OMAP VENC rev 2
  123. [ 0.110534] OMAP DSI rev 1.0
  124. [ 0.118927] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
  125. [ 0.127349] serial8250.2: ttyS0 at MMIO 0x49020000 (irq = 74) is a TI16750
  126. [ 0.132507] brd: module loaded
  127. [ 0.135284] loop: module loaded
  128. [ 0.136749] OneNAND driver initializing
  129. [ 0.136993] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base f0040000, freq 83 MHz
  130. [ 0.137084] OneNAND Manufacturer: Samsung (0xec)
  131. [ 0.137084] Muxed OneNAND 512MB 1.8V 16-bit (0x50)
  132. [ 0.137115] OneNAND version = 0x0232
  133. [ 0.137145] Chip support all block unlock
  134. [ 0.137145] Chip has 4KiB pagesize
  135. [ 0.137207] 6 cmdlinepart partitions found on MTD device omap2-onenand
  136. [ 0.137237] Creating 6 MTD partitions on "omap2-onenand":
  137. [ 0.137268] 0x000000000000-0x000000100000 : "bootloader"
  138. [ 0.137573] 0x000000100000-0x0000003c0000 : "config"
  139. [ 0.137817] 0x0000003c0000-0x0000013c0000 : "kernel"
  140. [ 0.138092] 0x0000013c0000-0x0000015c0000 : "log"
  141. [ 0.139892] onenand_wait: correctable ECC error = 0x5555, addr1 0x52, addr8 0xc0
  142. [ 0.141387] mtdoops: ready 0, 33 (no erase)
  143. [ 0.141418] mtdoops: Attached to MTD device 3
  144. [ 0.141448] 0x0000015c0000-0x00001e000000 : "var"
  145. [ 0.141693] 0x00001e000000-0x000020000000 : "moslo"
  146. [ 0.142486] tun: Universal TUN/TAP device driver, 1.6
  147. [ 0.142517] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  148. [ 0.159088] input: ECI Accessory as /devices/virtual/input/input0
  149. [ 0.159606] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
  150. [ 0.160186] i2c /dev entries driver
  151. [ 0.160705] Linux media interface: v0.10
  152. [ 0.160797] Linux video capture interface: v2.00
  153. [ 0.162170] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  154. [ 0.162994] HACK: TWL5031 WDT can't be disabled. Automatic WDT refresh started
  155. [ 0.163116] cpuidle: using governor ladder
  156. [ 0.163146] cpuidle: using governor menu
  157. [ 0.164489] omap_sham_mod_init: loading omap-sham driver
  158. [ 0.164611] omap-sham omap-sham: hw accel on OMAP rev 0.9
  159. [ 0.165771] Advanced Linux Sound Architecture Driver Version 1.0.21.
  160. [ 0.168212] tpa6130a2 2-0060: UNTESTED version detected (3)
  161. [ 0.168395] No device for DAI omap-mcbsp-dai-0
  162. [ 0.168426] No device for DAI omap-mcbsp-dai-1
  163. [ 0.168426] No device for DAI omap-mcbsp-dai-2
  164. [ 0.168457] No device for DAI omap-mcbsp-dai-3
  165. [ 0.168487] No device for DAI omap-mcbsp-dai-4
  166. [ 0.212890] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
  167. [ 0.215515] input: dfl61-twl4030 Jack as /devices/platform/soc-audio.0/sound/card0/input1
  168. [ 0.216705] DFL61 TWL SoC init done (config 4)
  169. [ 0.217376] asoc: tlv320dac33 <-> omap-mcbsp-dai-1 mapping ok
  170. [ 0.218231] ALSA device list:
  171. [ 0.218261] #0: dfl61-twl4030 (twl4030)
  172. [ 0.218292] #1: dfl61-dac33 (tlv320dac33)
  173. [ 0.218811] misc iphb: Module registered in 2.6.32.54-dfl61-20121301, built Mar 2 2013 23:06:19
  174. [ 0.218902] TCP cubic registered
  175. [ 0.218933] NET: Registered protocol family 17
  176. [ 0.218994] NET: Registered protocol family 15
  177. [ 0.219055] Bluetooth: L2CAP ver 2.14
  178. [ 0.219085] Bluetooth: L2CAP socket layer initialized
  179. [ 0.219116] Bluetooth: SCO (Voice Link) ver 0.6
  180. [ 0.219146] Bluetooth: SCO socket layer initialized
  181. [ 0.219421] Bluetooth: RFCOMM TTY layer initialized
  182. [ 0.219451] Bluetooth: RFCOMM socket layer initialized
  183. [ 0.219482] Bluetooth: RFCOMM ver 1.11
  184. [ 0.219543] Power Management for TI OMAP3.
  185. [ 0.220825] SmartReflex device[1] initialized
  186. [ 0.220916] SmartReflex device[2] initialized
  187. [ 0.221893] input: gpio-keys as /devices/platform/gpio-keys/input/input2
  188. [ 0.226318] Disabling unused clock "wdt1_ick"
  189. [ 0.226684] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  190. [ 0.228271] mmc0: hardware reset done
  191. [ 0.239959] input: Atmel mXT Touchscreen as /devices/platform/i2c_omap.2/i2c-2/2-004b/input/input3
  192. [ 0.240234] atmel_mxt: Atmel mXT Touchscreen v1.6 (0x29b82f) var:0x1 bld:0xab
  193. [ 0.243072] panel-nokia-dsi display0: skipping HW reset
  194. [ 0.270263] panel-nokia-dsi display0: pyrenees panel revision fe.91.96
  195. [ 0.271484] regulator_init_complete: incomplete constraints, leaving rm696_vmmc1 on
  196. [ 0.272918] asoc: WL1273 BT/FM codec <-> omap-mcbsp-dai-2 mapping ok
  197. [ 0.274017] Waiting for root device /dev/mmcblk0p2...
  198. [ 0.752075] mmc0: new high speed MMC card at address 0001
  199. [ 0.752502] mmcblk0: mmc0:0001 HYNIX 14.8 GiB
  200. [ 0.752746] mmcblk0:mmc_queue_do_make_request process kmmcd (pid 15), read to sector 0, sectors 8
  201. [ 0.754364] p1 p2 p3 p4
  202. [ 0.804199] mmc1: card claims to support voltages below the defined range. These will be ignored.
  203. [ 0.814239] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
  204. [ 0.816070] mmc1: new SDIO card at address 0001
  205. [ 0.828735] EXT4-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended
  206. [ 0.855651] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode
  207. [ 0.855743] VFS: Mounted root (ext4 filesystem) on device 179:2.
  208. [ 0.855834] Freeing init memory: 152K
  209. [ 0.883453] Aegis: Invoking userspace helper
  210. [ 0.986389] Aegis: vhash code matched to validator-init
  211. [ 1.049255] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  212. [ 1.049530] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  213. [ 1.051025] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  214. [ 1.053405] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  215. [ 1.060485] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  216. [ 1.065002] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  217. [ 1.065246] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  218. [ 1.066772] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  219. [ 1.069122] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  220. [ 1.076202] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  221. [ 1.084594] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  222. [ 1.084838] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  223. [ 1.086395] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  224. [ 1.088867] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  225. [ 1.096008] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  226. [ 3.263183] Aegis: Creating new mount point hashlist edc50000
  227. [ 3.351715] Aegis: enabled (config data protection)
  228. [ 3.351745] Aegis: hashlist initialized preinit_harmattan
  229. [ 5.205902] omap_device: smartreflex.0: new worst case activate latency 0: 30517
  230. [ 5.245635] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode
  231. [ 5.273468] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  232. [ 5.273712] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  233. [ 5.275268] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  234. [ 5.277740] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  235. [ 5.284942] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  236. [ 5.286712] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  237. [ 5.286956] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  238. [ 5.288482] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  239. [ 5.290893] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  240. [ 5.298095] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  241. [ 5.300201] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  242. [ 5.300445] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  243. [ 5.301971] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  244. [ 5.304382] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  245. [ 5.311584] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  246. [ 5.442291] g_ether gadget: using random host ethernet address
  247. [ 5.442626] usb0: MAC 14:36:05:df:03:bd
  248. [ 5.442657] usb0: HOST MAC ce:66:8f:cf:d5:4a
  249. [ 5.442687] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
  250. [ 5.442718] g_ether gadget: g_ether ready
  251. [ 6.670989] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  252. [ 6.671234] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  253. [ 6.672668] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  254. [ 6.674865] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  255. [ 6.681488] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  256. [ 7.116699] CMT driver
  257. [ 7.119842] hci_h4p hci_h4p: Registering HCI H4P device
  258. [ 7.120910] input: TWL4030 Keypad as /devices/platform/i2c_omap.1/i2c-1/1-004a/twl4030_keypad/input/input4
  259. [ 7.146331] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input5
  260. [ 7.199066] twl5031_aci twl5031_aci: found twl5031 ACI v.16
  261. [ 7.299407] Loading BCM4751 GPS driver
  262. [ 7.303985] wl1273_fm_module_init
  263. [ 7.395385] lp5521 2-0032: lp5521 programmable led chip found
  264. [ 7.398254] Registered led device: lp5521:channel0
  265. [ 7.474792] OMAP SSI hw driver loaded
  266. [ 7.532165] input: SPI vibrator as /devices/platform/omap2_mcspi.2/input/input6
  267. [ 7.541564] lis3lv02d: 8 bits sensor found
  268. [ 7.596282] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
  269. [ 7.599029] SGX clock rate 195 MHz
  270. [ 7.731170] NET: Registered protocol family 35
  271. [ 7.733215] HSI/SSI char device loaded
  272. [ 7.741821] SSI protocol aka McSAAB added
  273. [ 7.759033] wl1271: loaded
  274. [ 7.759063] wl1271: initialized
  275. [ 7.786987] ssi_protocol ssi_protocol: WAKELINES TEST OK
  276. [ 7.796661] netlink: 5 bytes leftover after parsing attributes.
  277. [ 8.493286] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  278. [ 8.493530] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  279. [ 8.495025] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  280. [ 8.497253] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  281. [ 8.503906] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  282. [ 8.619232] init: select-usb-module post-start process (383) terminated with status 1
  283. [ 8.712524] mmc_queue_do_make_request process sfdisk (pid 421), read to sector 0, sectors 8
  284. [ 11.116119] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  285. [ 11.116363] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  286. [ 11.117767] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  287. [ 11.120056] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  288. [ 11.126953] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  289. [ 11.159759] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  290. [ 11.160003] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  291. [ 11.161560] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  292. [ 11.163757] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  293. [ 11.170562] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  294. [ 11.171661] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  295. [ 11.263885] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  296. [ 11.264129] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  297. [ 11.265533] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  298. [ 11.267761] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  299. [ 11.285552] ramzswap: num_devices not specified. Using default: 1
  300. [ 11.285583] ramzswap: Creating 1 devices ...
  301. [ 11.308074] ramzswap: Disk size set to 262144 kB
  302. [ 11.312225] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  303. [ 11.313323] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  304. [ 11.319274] Adding 262136k swap on /dev/ramzswap0. Priority:-1 extents:1 across:262136k SS
  305. [ 12.248931] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  306. [ 12.249176] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  307. [ 12.250579] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  308. [ 12.257995] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  309. [ 12.274108] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  310. [ 12.546173] omap mailbox rev 4.0
  311. [ 12.554199] DSP Bridge driver loaded
  312. [ 12.965148] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  313. [ 12.970367] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  314. [ 13.004180] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  315. [ 13.006408] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  316. [ 13.090545] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  317. [ 14.381500] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  318. [ 14.382049] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  319. [ 14.383483] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  320. [ 14.391082] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  321. [ 14.483917] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  322. [ 14.765228] atmel_mxt 2-004b: firmware: requesting RM-696_Pyrenees_SMD_ES40_V1_6.bin
  323. [ 16.239624] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  324. [ 16.241058] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  325. [ 16.249267] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  326. [ 16.276580] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  327. [ 19.104827] omap-iommu omap-iommu.0: isp registered
  328. [ 19.163665] omap3isp omap3isp: Revision 15.0 found
  329. [ 19.163726] omap-iommu omap-iommu.0: isp: version 1.1
  330. [ 19.247100] smiapp 2-0037: firmware: requesting smiapp-sensor-0b-0125-02.bin
  331. [ 19.391082] smia_reglist_import: meta_reglist version 0.0.51
  332. [ 19.391113] smia_reglist_import: type 10 w 3568 h 2016 fmt 30314142 ival 100/1077 pclk 84000000
  333. [ 19.391113] smia_reglist_import: type 10 w 3568 h 2016 fmt 30314442 ival 100/500 pclk 249600000
  334. [ 19.391143] smia_reglist_import: type 10 w 3568 h 2016 fmt 30314442 ival 100/1500 pclk 249600000
  335. [ 19.391143] smia_reglist_import: type 10 w 3280 h 2464 fmt 30314142 ival 100/982 pclk 93333333
  336. [ 19.391174] smia_reglist_import: type 10 w 3280 h 2464 fmt 30314442 ival 100/500 pclk 249600000
  337. [ 19.391174] smia_reglist_import: type 10 w 3280 h 2464 fmt 30314442 ival 100/1500 pclk 249600000
  338. [ 19.391174] smia_reglist_import: type 10 w 3144 h 1772 fmt 30314442 ival 100/1458 pclk 128000000
  339. [ 19.391204] smia_reglist_import: type 10 w 2728 h 2048 fmt 30314442 ival 100/1412 pclk 153600000
  340. [ 19.391204] smia_reglist_import: type 10 w 1776 h 1008 fmt 30314142 ival 100/1000 pclk 132800000
  341. [ 19.391235] smia_reglist_import: type 10 w 1776 h 1008 fmt 30314142 ival 100/2400 pclk 132800000
  342. [ 19.391235] smia_reglist_import: type 10 w 1776 h 1008 fmt 30314142 ival 100/3000 pclk 132800000
  343. [ 19.391265] smia_reglist_import: type 10 w 1632 h 1232 fmt 30314142 ival 100/1000 pclk 159360000
  344. [ 19.391265] smia_reglist_import: type 10 w 1632 h 1232 fmt 30314142 ival 100/2999 pclk 159360000
  345. [ 19.391265] smia_reglist_import: type 10 w 816 h 608 fmt 30314142 ival 100/1500 pclk 159360000
  346. [ 19.391296] smia_reglist_import: type 10 w 816 h 608 fmt 30314142 ival 100/2965 pclk 159360000
  347. [ 19.391296] smia_reglist_import: type 1 w 0 h 0 fmt 30314142 ival 1/0 pclk 0
  348. [ 19.391326] smia_reglist_import: type 0 w 0 h 0 fmt 30314142 ival 1/0 pclk 0
  349. [ 19.434631] ad58xx 2-000e: bu8051gwz (5-1) version 5 found.
  350. [ 19.500030] smiapp 2-0010: firmware: requesting smia-sensor-0c-2134-02.bin
  351. [ 19.573760] smia_reglist_import: meta_reglist version 0.0.51
  352. [ 19.573791] smia_reglist_import: type 10 w 576 h 472 fmt 30314142 ival 100/2743 pclk 13770000
  353. [ 19.573791] smia_reglist_import: type 10 w 576 h 472 fmt 30314142 ival 100/1501 pclk 13770000
  354. [ 19.573791] smia_reglist_import: type 10 w 576 h 432 fmt 30314142 ival 100/2743 pclk 13770000
  355. [ 19.573822] smia_reglist_import: type 10 w 576 h 432 fmt 30314142 ival 100/1501 pclk 13770000
  356. [ 19.573822] smia_reglist_import: type 1 w 0 h 0 fmt 30314142 ival 1/0 pclk 0
  357. [ 19.573852] smia_reglist_import: type 0 w 0 h 0 fmt 30314142 ival 1/0 pclk 0
  358. [ 23.841552] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  359. [ 23.841857] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  360. [ 23.843292] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  361. [ 23.976989] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  362. [ 24.092834] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  363. [ 24.135040] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  364. [ 24.156860] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  365. [ 24.161743] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  366. [ 24.170440] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  367. [ 24.209625] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  368. [ 24.296600] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  369. [ 24.296844] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  370. [ 24.298248] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  371. [ 24.323760] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  372. [ 24.342559] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  373. [ 24.382965] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  374. [ 24.383178] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  375. [ 24.384704] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  376. [ 24.393676] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  377. [ 24.400360] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  378. [ 24.442077] onenand_wait: controller error! state 7 ctrl 0x0400 intr 0x8000
  379. [ 24.442108] onenand_write_ops_nolock: write failed -5
  380. [ 25.895324] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  381. [ 25.895538] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  382. [ 25.897003] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  383. [ 25.899230] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  384. [ 25.905975] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  385. [ 25.907073] onenand_wait: controller error! state 7 ctrl 0x0400 intr 0x8000
  386. [ 25.907104] onenand_write_ops_nolock: write failed -5
  387. [ 31.179870] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  388. [ 31.193054] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  389. [ 31.199798] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  390. [ 31.252716] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  391. [ 31.254974] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  392. [ 31.255218] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  393. [ 31.256622] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  394. [ 31.258880] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  395. [ 31.331665] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  396. [ 31.684753] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  397. [ 32.761260] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  398. [ 32.761505] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  399. [ 32.762908] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  400. [ 32.765136] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  401. [ 32.779724] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  402. [ 32.781829] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  403. [ 31.255218] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8 [2/459]
  404. [ 31.256622] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  405. [ 31.258880] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  406. [ 31.331665] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  407. [ 31.684753] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  408. [ 32.761260] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  409. [ 32.761505] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  410. [ 32.762908] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  411. [ 32.765136] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  412. [ 32.779724] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  413. [ 32.781829] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  414. [ 32.782073] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  415. [ 32.799285] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  416. [ 32.808624] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  417. [ 32.818420] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  418. [ 32.881134] Netfilter messages via NETLINK v0.30.
  419. [ 39.189239] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
  420. [ 48.236480] hci_h4p hci_h4p: firmware: requesting ti1273_le.bin
  421. [ 52.920196] wl1271_sdio mmc1:0001:2: firmware: requesting wl1271-fw.bin
  422. [ 54.362701] init: xsession/active-syncd main process (1285) terminated with status 5
  423. [ 56.287384] wl1271: firmware booted (Rev 6.1.1.39.339)
  424. [ 59.122100] wl1271: down
  425. [ 59.297882] cfg80211: Calling CRDA for country: TW
  426. [ 59.300415] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  427. [ 59.300659] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  428. [ 59.302093] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  429. [ 59.304321] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  430. [ 59.320129] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  431. [ 59.322418] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  432. [ 59.331939] cfg80211: Regulatory domain changed to country: TW
  433. [ 59.331939] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  434. [ 59.331970] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  435. [ 59.331970] (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1200 mBm)
  436. [ 59.331970] (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  437. [ 59.333831] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  438. [ 59.335266] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  439. [ 59.337493] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  440. [ 59.350189] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  441. [ 60.674224] wl1271: firmware booted (Rev 6.1.1.39.339)
  442. [ 60.744628] wlan0: authenticate with 50:67:f0:35:6b:1e (try 1)
  443. [ 60.747070] wlan0: authenticated
  444. [ 60.760833] wlan0: associate with 50:67:f0:35:6b:1e (try 1)
  445. [ 60.780456] wlan0: RX AssocResp from 50:67:f0:35:6b:1e (capab=0x411 status=0 aid=1)
  446. [ 60.780456] wlan0: associated
  447. [ 60.908843] wl1271: Association completed.
  448. [ 61.719207] pvr: MProgressIndica: cleaning up 144 unfreed resources
  449. [ 61.763214] init: boot-watchdog main process (494) killed by TERM signal
  450. [ 69.686248] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  451. [ 69.686523] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x8
  452. [ 69.688568] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x58
  453. [ 69.690826] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0xd4
  454. [ 69.700378] onenand_wait: correctable ECC error = 0x5555, addr1 0xa, addr8 0x0
  455. [ 96.019500] ip_tables: (C) 2000-2006 Netfilter Core Team
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!