API tools faq
paste
Advertisement
KenMacD

CB2 USB Test

KenMacD
Feb 21st, 2014
76
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.96 KB | None | 0 0
raw download clone embed print report
  1. dmesg:
  2.  
  3. [ 0.000000] Booting Linux on physical CPU 0x0
  4. [ 0.000000] Linux version 3.14.0-rc2-64776-g6500a8b-dirty (cubie@Cubian) (gcc version 4.7.2 (Debian 4.7.2-5) ) #7 SMP Sat Feb 22 03:20:57 UTC 2014
  5. [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  6. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  7. [ 0.000000] Machine model: Cubietech Cubieboard2
  8. [ 0.000000] Memory policy: Data cache writealloc
  9. [ 0.000000] On node 0 totalpages: 262144
  10. [ 0.000000] free_area_init_node: node 0, pgdat c05119c0, node_mem_map eeffb000
  11. [ 0.000000] Normal zone: 1520 pages used for memmap
  12. [ 0.000000] Normal zone: 0 pages reserved
  13. [ 0.000000] Normal zone: 194560 pages, LIFO batch:31
  14. [ 0.000000] HighMem zone: 528 pages used for memmap
  15. [ 0.000000] HighMem zone: 67584 pages, LIFO batch:15
  16. [ 0.000000] psci: probing function IDs from device-tree
  17. [ 0.000000] PERCPU: Embedded 5 pages/cpu @eefdd000 s6592 r0 d13888 u32768
  18. [ 0.000000] pcpu-alloc: s6592 r0 d13888 u32768 alloc=8*4096
  19. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  20. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260624
  21. [ 0.000000] Kernel command line: console=tty0 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:1280x800p60 root=/dev/mmcblk0p3 rootwait panic=10 consoleblank=0
  22. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  23. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  24. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  25. [ 0.000000] Memory: 1034052K/1048576K available (4016K kernel code, 161K rwdata, 784K rodata, 194K init, 236K bss, 14524K reserved, 270336K highmem)
  26. [ 0.000000] Virtual kernel memory layout:
  27. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  28. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  29. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  30. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  31. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  32. [ 0.000000] .text : 0xc0008000 - 0xc04b85e4 (4802 kB)
  33. [ 0.000000] .init : 0xc04b9000 - 0xc04e99c0 ( 195 kB)
  34. [ 0.000000] .data : 0xc04ea000 - 0xc05124a0 ( 162 kB)
  35. [ 0.000000] .bss : 0xc05124a8 - 0xc054d5cc ( 237 kB)
  36. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  37. [ 0.000000] Hierarchical RCU implementation.
  38. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  39. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  40. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  41. [ 0.000026] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
  42. [ 0.000008] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns
  43. [ 0.000136] Console: colour dummy device 80x30
  44. [ 0.000494] console [tty0] enabled
  45. [ 0.000530] Calibrating delay loop... 1915.28 BogoMIPS (lpj=9576448)
  46. [ 0.059932] pid_max: default: 32768 minimum: 301
  47. [ 0.060103] Mount-cache hash table entries: 512
  48. [ 0.060724] CPU: Testing write buffer coherency: ok
  49. [ 0.061013] /cpus/cpu@0 missing clock-frequency property
  50. [ 0.061042] /cpus/cpu@1 missing clock-frequency property
  51. [ 0.061062] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  52. [ 0.061104] Setting up static identity map for 0x403d1ee0 - 0x403d1f38
  53. [ 0.062195] CPU1: Booted secondary processor
  54. [ 0.121808] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  55. [ 0.121915] Brought up 2 CPUs
  56. [ 0.121960] SMP: Total of 2 processors activated.
  57. [ 0.121974] CPU: All CPU(s) started in HYP mode.
  58. [ 0.121986] CPU: Virtualization extensions available.
  59. [ 0.122648] devtmpfs: initialized
  60. [ 0.126449] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
  61. [ 0.126682] xor: measuring software checksum speed
  62. [ 0.221768] arm4regs : 1331.200 MB/sec
  63. [ 0.321770] 8regs : 843.600 MB/sec
  64. [ 0.421770] 32regs : 688.400 MB/sec
  65. [ 0.421785] xor: using function: arm4regs (1331.200 MB/sec)
  66. [ 0.421808] pinctrl core: initialized pinctrl subsystem
  67. [ 0.422020] regulator-dummy: no parameters
  68. [ 0.422233] NET: Registered protocol family 16
  69. [ 0.422548] DMA: preallocated 256 KiB pool for atomic coherent allocations
  70. [ 0.428997] bio: create slab <bio-0> at 0
  71. [ 0.592148] raid6: int32x1 138 MB/s
  72. [ 0.761949] raid6: int32x2 166 MB/s
  73. [ 0.932058] raid6: int32x4 154 MB/s
  74. [ 1.102143] raid6: int32x8 127 MB/s
  75. [ 1.102159] raid6: using algorithm int32x2 (166 MB/s)
  76. [ 1.102175] raid6: using intx1 recovery algorithm
  77. [ 1.102306] reg-fixed-voltage ahci-5v.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@0, deferring probe
  78. [ 1.102343] platform ahci-5v.3: Driver reg-fixed-voltage requests probe deferral
  79. [ 1.102380] reg-fixed-voltage usb1-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
  80. [ 1.102410] platform usb1-vbus.4: Driver reg-fixed-voltage requests probe deferral
  81. [ 1.102443] reg-fixed-voltage usb2-vbus.5: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
  82. [ 1.102473] platform usb2-vbus.5: Driver reg-fixed-voltage requests probe deferral
  83. [ 1.102763] usbcore: registered new interface driver usbfs
  84. [ 1.102816] usbcore: registered new interface driver hub
  85. [ 1.102976] usbcore: registered new device driver usb
  86. [ 1.103097] pps_core: LinuxPPS API ver. 1 registered
  87. [ 1.103115] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  88. [ 1.103151] PTP clock support registered
  89. [ 1.103947] Switched to clocksource timer
  90. [ 1.110514] NET: Registered protocol family 2
  91. [ 1.111049] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  92. [ 1.111143] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  93. [ 1.111275] TCP: Hash tables configured (established 8192 bind 8192)
  94. [ 1.111360] TCP: reno registered
  95. [ 1.111381] UDP hash table entries: 512 (order: 2, 16384 bytes)
  96. [ 1.111445] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  97. [ 1.111699] NET: Registered protocol family 1
  98. [ 1.111824] Clockevents: could not switch to one-shot mode:
  99. [ 1.111835] Clockevents: could not switch to one-shot mode: dummy_timer is not functional.
  100. [ 1.111838] Could not switch to high resolution mode on CPU 0
  101. [ 1.111876] dummy_timer is not functional.
  102. [ 1.111890] Could not switch to high resolution mode on CPU 1
  103. [ 1.112120] RPC: Registered named UNIX socket transport module.
  104. [ 1.112149] RPC: Registered udp transport module.
  105. [ 1.112164] RPC: Registered tcp transport module.
  106. [ 1.112177] RPC: Registered tcp NFSv4.1 backchannel transport module.
  107. [ 1.113119] futex hash table entries: 512 (order: 3, 32768 bytes)
  108. [ 1.113578] bounce pool size: 64 pages
  109. [ 1.122793] fuse init (API version 7.22)
  110. [ 1.123415] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  111. [ 1.123448] io scheduler noop registered
  112. [ 1.123461] io scheduler deadline registered
  113. [ 1.123652] io scheduler cfq registered (default)
  114. [ 1.125419] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  115. [ 1.166186] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  116. [ 1.188763] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
  117. [ 1.807474] console [ttyS0] enabled
  118. [ 1.812188] stmmaceth 1c50000.ethernet: no regulator found
  119. [ 1.817742] stmmaceth 1c50000.ethernet: no reset control found
  120. [ 1.823598] Ring mode enabled
  121. [ 1.826657] No HW DMA feature register supported
  122. [ 1.831185] Normal descriptors
  123. [ 1.834520] TX Checksum insertion supported
  124. [ 1.842078] libphy: stmmac: probed
  125. [ 1.845495] eth0: PHY ID 00008201 at 1 IRQ 0 (stmmac-0:01) active
  126. [ 1.851641] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  127. [ 1.858176] ehci-platform: EHCI generic platform driver
  128. [ 1.863515] ehci-platform 1c14000.usb: EHCI Host Controller
  129. [ 1.869117] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
  130. [ 1.876979] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000
  131. [ 1.901798] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
  132. [ 1.908098] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  133. [ 1.914902] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  134. [ 1.922136] usb usb1: Product: EHCI Host Controller
  135. [ 1.927018] usb usb1: Manufacturer: Linux 3.14.0-rc2-64776-g6500a8b-dirty ehci_hcd
  136. [ 1.934595] usb usb1: SerialNumber: 1c14000.usb
  137. [ 1.939707] hub 1-0:1.0: USB hub found
  138. [ 1.943533] hub 1-0:1.0: 1 port detected
  139. [ 1.947774] ehci-platform 1c1c000.usb: EHCI Host Controller
  140. [ 1.953388] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
  141. [ 1.961215] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000
  142. [ 1.981799] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
  143. [ 1.988051] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  144. [ 1.994852] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  145. [ 2.002084] usb usb2: Product: EHCI Host Controller
  146. [ 2.006966] usb usb2: Manufacturer: Linux 3.14.0-rc2-64776-g6500a8b-dirty ehci_hcd
  147. [ 2.014542] usb usb2: SerialNumber: 1c1c000.usb
  148. [ 2.019595] hub 2-0:1.0: USB hub found
  149. [ 2.023406] hub 2-0:1.0: 1 port detected
  150. [ 2.027919] mousedev: PS/2 mouse device common for all mice
  151. [ 2.034108] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
  152. [ 2.040910] sunxi-rtc 1c20d00.rtc: RTC enabled
  153. [ 2.045446] i2c /dev entries driver
  154. [ 2.050228] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  155. [ 2.058556] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
  156. [ 2.067612] sunxi-mci 1c0f000.mmc: Got CD GPIO #225.
  157. [ 2.072833] sunxi-mci 1c0f000.mmc: base:0xf00c2000 irq:64
  158. [ 2.079270] usbcore: registered new interface driver usbhid
  159. [ 2.084898] usbhid: USB HID core driver
  160. [ 2.088901] TCP: cubic registered
  161. [ 2.092241] NET: Registered protocol family 17
  162. [ 2.096831] Registering SWP/SWPB emulation handler
  163. [ 2.102901] bio: create slab <bio-1> at 1
  164. [ 2.108095] Btrfs loaded
  165. [ 2.111155] ahci-5v: 5000 mV
  166. [ 2.114418] usb1-vbus: 5000 mV
  167. [ 2.117794] usb2-vbus: 5000 mV
  168. [ 2.121037] sunxi-rtc 1c20d00.rtc: setting system clock to 2014-02-22 03:23:02 UTC (1393039382)
  169. [ 2.130519] Waiting for root device /dev/mmcblk0p3...
  170. [ 2.482400] mmc0: Skipping voltage switch
  171. [ 2.679051] mmc0: host does not support reading read-only switch. assuming write-enable.
  172. [ 2.811795] mmc0: new high speed SDXC card at address e624
  173. [ 2.817573] isa bounce pool size: 16 pages
  174. [ 2.821823] mmcblk0: mmc0:e624 SU64G 59.4 GiB
  175. [ 2.828018] mmcblk0: p1 p2 p3
  176. [ 2.902828] EXT3-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (240)
  177. [ 2.913040] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
  178. [ 2.950496] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
  179. [ 2.958698] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
  180. [ 2.971442] devtmpfs: mounted
  181. [ 2.974683] Freeing unused kernel memory: 192K (c04b9000 - c04e9000)
  182. [ 4.424525] udevd[150]: starting version 175
  183. [ 6.562411] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
  184. [ 6.755294] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
  185. [ 7.315769] random: vgscan urandom read with 116 bits of entropy available
  186. [ 8.718069] random: nonblocking pool is initialized
  187. [ 10.402749] No MAC Management Counters available
  188. [ 12.392062] libphy: stmmac-0:01 - Link is Up - 100/Full
  189.  
  190.  
  191. LSUSB:
  192.  
  193. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  194. Device Descriptor:
  195. bLength 18
  196. bDescriptorType 1
  197. bcdUSB 2.00
  198. bDeviceClass 9 Hub
  199. bDeviceSubClass 0 Unused
  200. bDeviceProtocol 0 Full speed (or root) hub
  201. bMaxPacketSize0 64
  202. idVendor 0x1d6b Linux Foundation
  203. idProduct 0x0002 2.0 root hub
  204. bcdDevice 3.14
  205. iManufacturer 3 Linux 3.14.0-rc2-64776-g6500a8b-dirty ehci_hcd
  206. iProduct 2 EHCI Host Controller
  207. iSerial 1 1c14000.usb
  208. bNumConfigurations 1
  209. Configuration Descriptor:
  210. bLength 9
  211. bDescriptorType 2
  212. wTotalLength 25
  213. bNumInterfaces 1
  214. bConfigurationValue 1
  215. iConfiguration 0
  216. bmAttributes 0xe0
  217. Self Powered
  218. Remote Wakeup
  219. MaxPower 0mA
  220. Interface Descriptor:
  221. bLength 9
  222. bDescriptorType 4
  223. bInterfaceNumber 0
  224. bAlternateSetting 0
  225. bNumEndpoints 1
  226. bInterfaceClass 9 Hub
  227. bInterfaceSubClass 0 Unused
  228. bInterfaceProtocol 0 Full speed (or root) hub
  229. iInterface 0
  230. Endpoint Descriptor:
  231. bLength 7
  232. bDescriptorType 5
  233. bEndpointAddress 0x81 EP 1 IN
  234. bmAttributes 3
  235. Transfer Type Interrupt
  236. Synch Type None
  237. Usage Type Data
  238. wMaxPacketSize 0x0004 1x 4 bytes
  239. bInterval 12
  240. Hub Descriptor:
  241. bLength 9
  242. bDescriptorType 41
  243. nNbrPorts 1
  244. wHubCharacteristic 0x000a
  245. No power switching (usb 1.0)
  246. Per-port overcurrent protection
  247. bPwrOn2PwrGood 10 * 2 milli seconds
  248. bHubContrCurrent 0 milli Ampere
  249. DeviceRemovable 0x00
  250. PortPwrCtrlMask 0xff
  251. Hub Port Status:
  252. Port 1: 0000.0100 power
  253. Device Status: 0x0001
  254. Self Powered
  255.  
  256. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  257. Device Descriptor:
  258. bLength 18
  259. bDescriptorType 1
  260. bcdUSB 2.00
  261. bDeviceClass 9 Hub
  262. bDeviceSubClass 0 Unused
  263. bDeviceProtocol 0 Full speed (or root) hub
  264. bMaxPacketSize0 64
  265. idVendor 0x1d6b Linux Foundation
  266. idProduct 0x0002 2.0 root hub
  267. bcdDevice 3.14
  268. iManufacturer 3 Linux 3.14.0-rc2-64776-g6500a8b-dirty ehci_hcd
  269. iProduct 2 EHCI Host Controller
  270. iSerial 1 1c1c000.usb
  271. bNumConfigurations 1
  272. Configuration Descriptor:
  273. bLength 9
  274. bDescriptorType 2
  275. wTotalLength 25
  276. bNumInterfaces 1
  277. bConfigurationValue 1
  278. iConfiguration 0
  279. bmAttributes 0xe0
  280. Self Powered
  281. Remote Wakeup
  282. MaxPower 0mA
  283. Interface Descriptor:
  284. bLength 9
  285. bDescriptorType 4
  286. bInterfaceNumber 0
  287. bAlternateSetting 0
  288. bNumEndpoints 1
  289. bInterfaceClass 9 Hub
  290. bInterfaceSubClass 0 Unused
  291. bInterfaceProtocol 0 Full speed (or root) hub
  292. iInterface 0
  293. Endpoint Descriptor:
  294. bLength 7
  295. bDescriptorType 5
  296. bEndpointAddress 0x81 EP 1 IN
  297. bmAttributes 3
  298. Transfer Type Interrupt
  299. Synch Type None
  300. Usage Type Data
  301. wMaxPacketSize 0x0004 1x 4 bytes
  302. bInterval 12
  303. Hub Descriptor:
  304. bLength 9
  305. bDescriptorType 41
  306. nNbrPorts 1
  307. wHubCharacteristic 0x000a
  308. No power switching (usb 1.0)
  309. Per-port overcurrent protection
  310. bPwrOn2PwrGood 10 * 2 milli seconds
  311. bHubContrCurrent 0 milli Ampere
  312. DeviceRemovable 0x00
  313. PortPwrCtrlMask 0xff
  314. Hub Port Status:
  315. Port 1: 0000.0100 power
  316. Device Status: 0x0001
  317. Self Powered
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!