dmesg-on-FreeBSD-11-current-r260035

Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r260035: Sun Dec 29 13:10:49 CET 2013
    [email protected]:/usr/obj/usr/src/sys/NEWCONS amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
WARNING: WITNESS option enabled, expect reduced performance.
CPU: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz (2494.39-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x306a9  Family = 0x6  Model = 0x3a  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x3dbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Standard Extended Features=0x281<GSFSBASE,SMEP,ENHMOVSB>
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 3982368768 (3797 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SECCSD LH43STAR>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <SECCSD LH43STAR> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <IvyBridge mobile GT2 IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf060a000-0xf060a3ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
hdac0: <Intel Panther Point HDA Controller> mem 0xf0600000-0xf0603fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ath0: <Atheros AR9485> mem 0xf0500000-0xf057ffff irq 16 at device 0.0 on pci1
ar9300_set_stub_functions: setting stub functions
ar9300_set_stub_functions: setting stub functions
ar9300_attach: calling ar9300_hw_attach
ar9300_hw_attach: calling ar9300_eeprom_attach
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: RX status length: 48
ath0: RX buffer size: 4096
ath0: TX descriptor length: 128
ath0: TX status length: 36
ath0: TX buffers per descriptor: 4
ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0
ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 0.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 810xE PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xf0404000-0xf0404fff,0xf0400000-0xf0403fff irq 19 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x40800000
re0: MAC rev. 0x00200000
miibus0: <MII bus> on re0
rlphy0: <RTL8201E 10/100 media interface> PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
re0: Ethernet address: 18:67:b0:39:bd:23
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf0609000-0xf06093ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0x3088-0x308f,0x3094-0x3097,0x3080-0x3087,0x3090-0x3093,0x3060-0x307f mem 0xf0608000-0xf06087ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC269 (Internal Analog)> at nid 20 and 18 on hdaa0
pcm1: <Realtek ALC269 (Left Analog)> at nid 21 and 24 on hdaa0
hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1
random: unblocking device.
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <HGST HTS545050A7E380 GG2OACD0> ATA-8 SATA 2.x device
ada0: Serial Number TL8516491XR0JC
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
cd0 at ahcich2 bus 0 scbus1 target 0 lun 0
cd0: <Slimtype DVD A DU8A5SH NS21> Removable CD-ROM SCSI-0 device
cd0: Serial Number A5903738ADD1N34D099C
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ses0: SEMB SES Device
Netvsc initializing... done!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1247192980 Hz quality 1000
WARNING: WITNESS option enabled, expect reduced performance.
Root mount waiting for: usbus1 usbus0
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
Root mount waiting for: usbus1 usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.3: <Atheros Communications> at usbus0
ugen1.3: <Generic> at usbus1
umass0: <Generic Flash Card ReaderWriter, class 0/0, rev 2.00/1.00, addr 3> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x4001
umass0:3:0: Attached to scbus3
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <Multiple Card  Reader 1.00> Removable Direct Access SCSI-0 device
da0: Serial Number 058F63666438
da0: 40.000MB/s transfers
da0: 1898MB (3887104 512 byte sectors: 255H 63S/T 241C)
da0: quirks=0x2<NO_6_BYTE>
Root mount waiting for: usbus0
ugen0.4: <Webcam SC-10HDD12636P> at usbus0
Trying to mount root from zfs:sys/ROOT/curr260032-2 []...
info: [drm] Initialized drm 1.1.0 20060810
drmn0: <Intel IvyBridge (M)> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] AGP at 0xe0000000 256MB
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
iicbus12: <Philips I2C bus> on iicbb6 addr 0xff
iic12: <I2C generic I/O> on iicbus12
iic13: <I2C generic I/O> on iicbus13
iicbus14: <Philips I2C bus> on iicbb7 addr 0xff
iic14: <I2C generic I/O> on iicbus14
iic15: <I2C generic I/O> on iicbus15
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
drmn0: taking over the fictitious range 0xe0000000-0xf0000000
fbd0 on drmn0
vt_allocate: Replace existing VT driver.
info: [drm] Initialized i915 1.6.0 20080730
wlan0: Ethernet address: 18:67:b0:7d:c1:3b
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
vboxdrv: fAsync=0 offMin=0x5ba offMax=0x1a686
consolectl: unknown ioctl: t:40007413
lock order reversal:
 1st 0xfffff8000ba20040 filedesc structure (filedesc structure) @ /usr/src/sys/kern/kern_descrip.c:1202
 2nd 0xfffff800d53e85f0 zfs (zfs) @ /usr/src/sys/kern/vfs_subr.c:4350
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe011a4d1580
kdb_backtrace() at kdb_backtrace+0x39/frame 0xfffffe011a4d1630
witness_checkorder() at witness_checkorder+0xd23/frame 0xfffffe011a4d16c0
__lockmgr_args() at __lockmgr_args+0x86c/frame 0xfffffe011a4d17f0
vop_stdlock() at vop_stdlock+0x3c/frame 0xfffffe011a4d1810
VOP_LOCK1_APV() at VOP_LOCK1_APV+0xf5/frame 0xfffffe011a4d1840
_vn_lock() at _vn_lock+0xab/frame 0xfffffe011a4d18b0
knlist_remove_kq() at knlist_remove_kq+0x82/frame 0xfffffe011a4d18e0
filt_vfsdetach() at filt_vfsdetach+0x28/frame 0xfffffe011a4d1900
knote_fdclose() at knote_fdclose+0xc8/frame 0xfffffe011a4d1950
closefp() at closefp+0x64/frame 0xfffffe011a4d19a0
amd64_syscall() at amd64_syscall+0x265/frame 0xfffffe011a4d1ab0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe011a4d1ab0
--- syscall (6, FreeBSD ELF64, sys_close), rip = 0x80164a2da, rsp = 0x7fffff7fbef8, rbp = 0x7fffff7fbf10 ---
tun0: link state changed to UP