U-Boot 2013.10-dirty (Dec 04 2013 - 11:00:13)

CPU:   Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: POR
Board: Wandboard
DRAM:  2 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Hit any key to stop autoboot:  1  0
mmc0 is current device
SD/MMC found on device 0
167 bytes read in 28 ms (4.9 KiB/s)
Importing environment from mmc (uEnv.txt)...
Checking if uenvcmd is set ...
Running uenvcmd ...
3954048 bytes read in 321 ms (11.7 MiB/s)
25970 bytes read in 326 ms (77.1 KiB/s)
Kernel image @ 0x12000000 [ 0x000000 - 0x3c5580 ]
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 11009571

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-rc2-armv7-x2.2 (voodoo@hades) (gcc version 4.8.2 20131014 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2013.10 - Linaro GCC 2013.10) ) #1 SMP Wed Dec 4 11:12:09 CST 2013
[    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Wandboard i.MX6 Quad Board
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] PERCPU: Embedded 9 pages/cpu @c201c000 s13632 r8192 d15040 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522768
[    0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait video=
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 2062748K/2097152K available (7550K kernel code, 641K rwdata, 3140K rodata, 481K init, 1017K bss, 34404K reserved, 1318912K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0a78c8c   (10692 kB)
[    0.000000]       .init : 0xc0a79000 - 0xc0af1540   ( 482 kB)
[    0.000000]       .data : 0xc0af2000 - 0xc0b92780   ( 642 kB)
[    0.000000]        .bss : 0xc0b92780 - 0xc0c90ea0   (1018 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] L310 cache controller enabled
[    0.000000] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x32070000, Cache size: 1024 kB
[    0.000000] sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 65075262448ns
[    0.000000] Console: colour dummy device 80x30
[    0.000939] Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
[    0.090465] pid_max: default: 32768 minimum: 301
[    0.090587] Security Framework initialized
[    0.090613] AppArmor: AppArmor initialized
[    0.090782] Mount-cache hash table entries: 512
[    0.095255] Initializing cgroup subsys memory
[    0.095278] Initializing cgroup subsys devices
[    0.095291] Initializing cgroup subsys freezer
[    0.095301] Initializing cgroup subsys net_cls
[    0.095312] Initializing cgroup subsys blkio
[    0.095321] Initializing cgroup subsys perf_event
[    0.095396] CPU: Testing write buffer coherency: ok
[    0.095664] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.095724] Setting up static identity map for 0x10726018 - 0x10726070
[    0.097498] CPU1: Booted secondary processor
[    0.130452] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.131296] CPU2: Booted secondary processor
[    0.170452] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.171302] CPU3: Booted secondary processor
[    0.210452] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.210563] Brought up 4 CPUs
[    0.210592] SMP: Total of 4 processors activated.
[    0.210603] CPU: All CPU(s) started in SVC mode.
[    0.211408] devtmpfs: initialized
[    0.214901] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.215869] xor: measuring software checksum speed
[    0.310434]    arm4regs  :  1116.000 MB/sec
[    0.410430]    8regs     :   862.400 MB/sec
[    0.510433]    32regs    :   879.200 MB/sec
[    0.610433]    neon      :   847.600 MB/sec
[    0.610444] xor: using function: arm4regs (1116.000 MB/sec)
[    0.610463] pinctrl core: initialized pinctrl subsystem
[    0.610772] regulator-dummy: no parameters
[    0.611072] NET: Registered protocol family 16
[    0.612728] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.613155] cpuidle: using governor ladder
[    0.613165] cpuidle: using governor menu
[    0.613390] CPU identified as i.MX6Q, silicon rev 1.2
[    0.620254] syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered
[    0.620508] vdd1p1: 800 <--> 1375 mV at 1100 mV
[    0.620799] vdd3p0: 2800 <--> 3150 mV at 3000 mV
[    0.621050] vdd2p5: 2000 <--> 2750 mV at 2400 mV
[    0.621313] cpu: 725 <--> 1450 mV at 1150 mV
[    0.621567] vddpu: 725 <--> 1450 mV at 1150 mV
[    0.621833] vddsoc: 725 <--> 1450 mV at 1200 mV
[    0.622965] syscon 20e0000.iomuxc-gpr: regmap [mem 0x020e0000-0x020e0037] registered
[    0.624853] syscon 21bc000.ocotp: regmap [mem 0x021bc000-0x021bffff] registered
[    0.626280] No ATAGs?
[    0.626308] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.626318] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.627253] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[    0.636096] bio: create slab <bio-0> at 0
[    0.800625] raid6: int32x1     91 MB/s
[    0.970594] raid6: int32x2    130 MB/s
[    1.140566] raid6: int32x4    130 MB/s
[    1.310572] raid6: int32x8    145 MB/s
[    1.480457] raid6: neonx1     613 MB/s
[    1.650491] raid6: neonx2     673 MB/s
[    1.820556] raid6: neonx4     352 MB/s
[    1.990521] raid6: neonx8     239 MB/s
[    1.990530] raid6: using algorithm neonx2 (673 MB/s)
[    1.990538] raid6: using intx1 recovery algorithm
[    1.991479] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
[    1.991501] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
[    1.991977] 2P5V: 2500 mV
[    1.992160] 3P3V: 3300 mV
[    1.994907] SCSI subsystem initialized
[    1.995352] usbcore: registered new interface driver usbfs
[    1.995401] usbcore: registered new interface driver hub
[    1.995501] usbcore: registered new device driver usb
[    1.996763] i2c i2c-0: IMX I2C adapter registered
[    1.997535] i2c i2c-1: IMX I2C adapter registered
[    1.997847] media: Linux media interface: v0.10
[    1.997892] Linux video capture interface: v2.00
[    1.997978] pps_core: LinuxPPS API ver. 1 registered
[    1.997989] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.998011] PTP clock support registered
[    1.998060] EDAC MC: Ver: 3.0.0
[    1.998718] Advanced Linux Sound Architecture Driver Initialized.
[    1.999593] NetLabel: Initializing
[    1.999604] NetLabel:  domain hash size = 128
[    1.999611] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.999663] NetLabel:  unlabeled traffic allowed by default
[    1.999883] Switched to clocksource mxc_timer1
[    2.019716] AppArmor: AppArmor Filesystem Enabled
[    2.028617] NET: Registered protocol family 2
[    2.029280] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    2.029369] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    2.029508] TCP: Hash tables configured (established 8192 bind 8192)
[    2.029598] TCP: reno registered
[    2.029617] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    2.029676] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    2.030080] NET: Registered protocol family 1
[    2.030396] RPC: Registered named UNIX socket transport module.
[    2.030407] RPC: Registered udp transport module.
[    2.030416] RPC: Registered tcp transport module.
[    2.030423] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.031107] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    2.032680] audit: initializing netlink socket (disabled)
[    2.032722] type=2000 audit(2.019:1): initialized
[    2.258549] bounce pool size: 64 pages
[    2.262499] VFS: Disk quotas dquot_6.5.2
[    2.262751] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.264973] NFS: Registering the id_resolver key type
[    2.265051] Key type id_resolver registered
[    2.265061] Key type id_legacy registered
[    2.265080] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    2.265273] fuse init (API version 7.22)
[    2.266021] bio: create slab <bio-1> at 1
[    2.266870] Btrfs loaded
[    2.267075] msgmni has been set to 1452
[    2.268690] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.268811] io scheduler noop registered
[    2.268824] io scheduler deadline registered
[    2.268971] io scheduler cfq registered (default)
[    2.269456] imx-weim 21b8000.weim: Driver registered.
[    2.275382] imx-sdma 20ec000.sdma: initialized
[    2.276065] imx-sdma 20ec000.sdma: Direct firmware load failed with error -2
[    2.276082] imx-sdma 20ec000.sdma: Falling back to user helper
[    2.276098] imx-sdma 20ec000.sdma: firmware not found
[    2.328541] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.329721] Serial: IMX driver
[    2.330039] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58, base_baud = 5000000) is a IMX
[    3.171214] console [ttymxc0] enabled
[    3.175457] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 60, base_baud = 5000000) is a IMX
[    3.185040] serial: Freescale lpuart driver
[    3.189637] [drm] Initialized drm 1.1.0 20060810
[    3.194358] usbcore: registered new interface driver udl
[    3.204056] ahci ahci: SSS flag set, parallel bus scan disabled
[    3.210044] ahci ahci: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    3.217806] ahci ahci: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
[    3.226892] scsi0 : ahci_platform
[    3.230504] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 71
[    3.240887] fec 2188000.ethernet: dummy supplies not allowed
[    3.263610] libphy: fec_enet_mii_bus: probed
[    3.268360] fec 2188000.ethernet eth0: registered PHC device 0
[    3.275068] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.281640] ehci-omap: OMAP-EHCI Host Controller driver
[    3.287090] usbcore: registered new interface driver usb-storage
[    3.293716] imx_usb 2184000.usb: usbmisc init failed, ret=-517
[    3.299583] platform 2184000.usb: Driver imx_usb requests probe deferral
[    3.306378] imx_usb 2184200.usb: usbmisc init failed, ret=-517
[    3.312256] platform 2184200.usb: Driver imx_usb requests probe deferral
[    3.319615] mousedev: PS/2 mouse device common for all mice
[    3.326047] snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc0
[    3.334445] i2c /dev entries driver
[    3.339023] thermal thermal_zone0: failed to read out thermal zone 0
[    3.346245] imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)
[    3.354842] sdhci: Secure Digital Host Controller Interface driver
[    3.361066] sdhci: Copyright(c) Pierre Ossman
[    3.365685] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.372167] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode
[    3.382370] sdhci-esdhc-imx 2190000.usdhc: dummy supplies not allowed
[    3.388823] mmc0: no vqmmc regulator found
[    3.392959] sdhci-esdhc-imx 2190000.usdhc: dummy supplies not allowed
[    3.399408] mmc0: no vmmc regulator found
[    3.449904] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
[    3.457421] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode
[    3.467618] sdhci-esdhc-imx 2194000.usdhc: dummy supplies not allowed
[    3.474087] mmc1: no vqmmc regulator found
[    3.478202] sdhci-esdhc-imx 2194000.usdhc: dummy supplies not allowed
[    3.484662] mmc1: no vmmc regulator found
[    3.529910] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
[    3.541705] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
[    3.550908] sdhci-esdhc-imx 2198000.usdhc: dummy supplies not allowed
[    3.559377] mmc2: no vqmmc regulator found
[    3.563523] sdhci-esdhc-imx 2198000.usdhc: dummy supplies not allowed
[    3.569999] mmc2: no vmmc regulator found
[    3.589917] ata1: SATA link down (SStatus 0 SControl 300)
[    3.596051] mmc1: queuing unknown CIS tuple 0x80 (50 bytes)
[    3.609904] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
[    3.617164] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    3.617453] ledtrig-cpu: registered to indicate activity on CPUs
[    3.617892] hidraw: raw HID events driver (C) Jiri Kosina
[    3.618468] usbcore: registered new interface driver usbhid
[    3.618471] usbhid: USB HID core driver
[    3.618949] ashmem: initialized
[    3.619771] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.619774] [drm] No driver support for vblank timestamp query.
[    3.619781] [drm] Initialized imx-drm 1.0.0 20120507 on minor 0
[    3.621146] imx-ipuv3 2400000.ipu: IPUv3H probed
[    3.621724] imx-ipuv3 2800000.ipu: IPUv3H probed
[    3.622462] imx-hdmi 120000.hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
[    3.643211] sgtl5000 1-000a: sgtl5000 revision 0x11
[    3.670402] sgtl5000 1-000a: dummy supplies not allowed
[    3.670410] sgtl5000 1-000a: Failed to get supply 'VDDD': -19
[    3.670581] 1-000a: 1200 mV normal
[    3.670736] sgtl5000 1-000a: Using internal LDO instead of VDDD
[    3.684736] imx-sgtl5000 sound.11: sgtl5000 <-> 2028000.ssi mapping ok
[    3.689066] imx-spdif sound-spdif.12: dit-hifi <-> 2004000.spdif mapping ok
[    3.690945] oprofile: using arm/armv7-ca9
[    3.691220] TCP: cubic registered
[    3.691753] NET: Registered protocol family 10
[    3.692713] mip6: Mobile IPv6
[    3.692722] NET: Registered protocol family 17
[    3.692805] Key type dns_resolver registered
[    3.692809] mpls_gso: MPLS GSO support
[    3.749125] ThumbEE CPU extension supported.
[    3.753445] Registering SWP/SWPB emulation handler
[    3.758273] mmc1: queuing unknown CIS tuple 0x80 (4 bytes)
[    3.758612] registered taskstats version 1
[    3.758674] AppArmor: AppArmor sha1 policy hashing enabled
[    3.758888] Error: Driver 'tfp410' is already registered, aborting...
[    3.759837] ci_hdrc ci_hdrc.0: doesn't support gadget
[    3.759843] ci_hdrc ci_hdrc.0: no supported roles
[    3.760211] 2184200.usb supply vbus not found, using dummy regulator
[    3.760945] ci_hdrc ci_hdrc.1: doesn't support gadget
[    3.760961] ci_hdrc ci_hdrc.1: EHCI Host Controller
[    3.761128] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
[    3.779917] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[    3.780109] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.780116] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.780122] usb usb1: Product: EHCI Host Controller
[    3.780128] usb usb1: Manufacturer: Linux 3.13.0-rc2-armv7-x2.2 ehci_hcd
[    3.780133] usb usb1: SerialNumber: ci_hdrc.1
[    3.780557] hub 1-0:1.0: USB hub found
[    3.780596] hub 1-0:1.0: 1 port detected
[    3.855913] snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 1970-01-01 00:01:00 UTC (60)
[    3.864560] sr_init: No PMIC hook to init smartreflex
[    3.869703] sr_init: platform driver register failed for SR
[    3.904178] mmc1: queuing unknown CIS tuple 0x02 (1 bytes)
[    3.917277] mmc1: new SDIO card at address 0001
[    3.968116] mmc2: host does not support reading read-only switch. assuming write-enable.
[    3.982413] mmc2: new high speed SD card at address 1234
[    3.987967] isa bounce pool size: 16 pages
[    3.992186] mmcblk0: mmc2:1234 SA02G 1.81 GiB
[    3.998424]  mmcblk0: p1 p2
[    6.465387] Console: switching to colour frame buffer device 128x48
[    6.476514] imx-drm imx-drm: fb0:  frame buffer device
[    6.481675] imx-drm imx-drm: registered panic notifier
[    6.486957] ALSA device list:
[    6.489942]   #0: imx6-wandboard-sgtl5000
[    6.493968]   #1: imx-spdif
[    6.501070] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[    6.508385] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[    8.378149] random: nonblocking pool is initialized
[   13.329030] EXT4-fs (mmcblk0p2): recovery complete
[   14.078671] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[   14.086825] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[   14.095083] devtmpfs: mounted
[   14.098404] Freeing unused kernel memory: 480K (c0a79000 - c0af1000)

INIT: version 2.88 booting

[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: udevd[   14.938794] udevd[187]: starting version 175
[?25l[?1c7[ ok 8[?25h[?0c.
[....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone.
[....] Waiting for /dev to be fully populated...[   15.552558] cfg80211: Calling CRDA to update world regulatory domain
[   15.636942] brcmfmac: brcmf_sdio_chip_drivestrengthinit: No SDIO Drive strength init done for chip 4329 rev 3 pmurev 6
[   15.719860] brcmfmac_sdio mmc1:0001:2: Direct firmware load failed with error -2
[   15.727904] brcmfmac_sdio mmc1:0001:2: Falling back to user helper
[   15.734199] brcmfmac: brcmf_sdbrcm_get_fw: fail to request firmware brcm/brcmfmac4329-sdio.txt (-2)
[   15.734561] Bluetooth: Core ver 2.17
[   15.734614] NET: Registered protocol family 31
[   15.734619] Bluetooth: HCI device and connection manager initialized
[   15.734639] Bluetooth: HCI socket layer initialized
[   15.734648] Bluetooth: L2CAP socket layer initialized
[   15.734663] Bluetooth: SCO socket layer initialized
[   15.772479] brcmfmac: _brcmf_sdbrcm_download_firmware: dongle nvram file download failed
[   15.780687] brcmfmac: brcmf_bus_start: brcmf_sdbrcm_bus_init failed -1
[   15.787279] brcmfmac: brcmf_sdbrcm_probe: dongle is not responding
[   15.794171] brcmfmac: brcmf_sdio_probe: device attach failed
[   15.800027] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19...
[   15.807486] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[?25l[?1c7[ ok 8[?25h[?0cdone.
[....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone.
[   17.593407] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[....] Checking root file system...fsck from util-linux 2.20.1
rootfs: clean, 22002/115920 files, 105550/463104 blocks
[?25l[?1c7[ ok 8[?25h[?0cdone.
[   17.738442] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c.
[....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone.
[....] Checking file systems...fsck from util-linux 2.20.1
boot was not cleanly unmounted, check forced.

boot: |=======                                                 | 11.7%

boot: |==========================                              / 46.7%

boot: |=======================================                 - 70.0%

boot: |========================================================| 100.0%

boot: 95/12288 files (70.5% non-contiguous), 7766/49152 blocks
fsck died with exit status 1
[?25l[?1c7[ ok 8[?25h[?0cdone.
[....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone.
[....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone.
[....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c.
[....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone.
[....] Configuring network interfaces...[?25l[?1c7[ ok 8[?25h[?0cdone.
[....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c.

INIT: Entering runlevel: 2

[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[ ok 8[?25h[?0c.
[....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
[?25l[?1c7[ ok 8[?25h[?0c.
udhcpd: Disabled. Edit /etc/default/udhcpd to enable it.
[....] Loading cpufreq kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone (none).
[....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c.
[....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c.
[....] Starting OpenBSD Secure Shell server: sshdCould not load host key: /etc/ssh/ssh_host_rsa_key

Could not load host key: /etc/ssh/ssh_host_dsa_key

Could not load host key: /etc/ssh/ssh_host_ecdsa_key

[?25l[?1c7[ ok 8[?25h[?0c.
[....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...CPU1...CPU2...CPU3...[?25l[?1c7[ ok 8[?25h[?0cdone.

Debian GNU/Linux 7 arm ttymxc0

arm login: debian

Password:
Linux arm 3.13.0-rc2-armv7-x2.2 #1 SMP Wed Dec 4 11:12:09 CST 2013 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
debian@arm:~$ cat /boot/uboot/uEnv.txt
#optargs=
#mmcroot=/dev/mmcblk0p2 ro
#mmcrootfstype=ext4 rootwait fixrtc
#video=

uenvcmd=run loadzimage; run loadfdt; run mmcargs; bootz ${loadaddr} - ${fdt_addr};
debian@arm:~$