Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 3.089892] ahci 0000:00:11.0: version 3.0
- [ 3.090119] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
- [ 3.090122] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
- [ 3.090661] scsi host0: ahci
- [ 3.090786] scsi host1: ahci
- [ 3.090905] scsi host2: ahci
- [ 3.091013] scsi host3: ahci
- [ 3.091057] ata1: SATA max UDMA/133 abar m1024@0xf8ffa000 port 0xf8ffa100 irq 28
- [ 3.091060] ata2: SATA max UDMA/133 abar m1024@0xf8ffa000 port 0xf8ffa180 irq 28
- [ 3.091062] ata3: SATA max UDMA/133 abar m1024@0xf8ffa000 port 0xf8ffa200 irq 28
- [ 3.091064] ata4: SATA max UDMA/133 abar m1024@0xf8ffa000 port 0xf8ffa280 irq 28
- [ 3.091153] ahci 0000:04:00.0: JMB361 has only one port
- [ 3.091170] ahci 0000:04:00.0: forcing port_map 0x3 -> 0x1
- [ 3.102240] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
- [ 3.102243] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
- [ 3.102531] scsi host4: ahci
- [ 3.102656] scsi host5: ahci
- [ 3.102701] ata5: SATA max UDMA/133 abar m8192@0xfcffe000 port 0xfcffe100 irq 17
- [ 3.102702] ata6: DUMMY
- [ 3.103210] scsi host6: pata_atiixp
- [ 3.103312] scsi host7: pata_atiixp
- [ 3.103346] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
- [ 3.103348] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
- [ 3.103378] pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
- [ 3.103919] scsi host8: pata_jmicron
- [ 3.104046] scsi host9: pata_jmicron
- [ 3.104084] ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 18
- [ 3.104086] ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 18
- [ 3.104273] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 3.104605] r8169 0000:01:00.0 eth0: RTL8168e/8111e at 0xffffc90000c66000, bc:ae:c5:18:c9:92, XID 0c200000 IRQ 29
- [ 3.104607] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 3.104693] usbcore: registered new interface driver rtl8192cu
- [ 3.157254] firewire_ohci 0000:02:08.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
- [ 3.157426] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.157428] ehci-pci: EHCI PCI platform driver
- [ 3.157545] QUIRK: Enable AMD PLL fix
- [ 3.157566] ehci-pci 0000:00:12.2: EHCI Host Controller
- [ 3.157623] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
- [ 3.157626] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 3.157634] ehci-pci 0000:00:12.2: debug port 1
- [ 3.157664] ehci-pci 0000:00:12.2: irq 17, io mem 0xf8ffa400
- [ 3.163247] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
- [ 3.163388] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.163392] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.163394] usb usb1: Product: EHCI Host Controller
- [ 3.163395] usb usb1: Manufacturer: Linux 4.1.12-gentoo ehci_hcd
- [ 3.163397] usb usb1: SerialNumber: 0000:00:12.2
- [ 3.163549] hub 1-0:1.0: USB hub found
- [ 3.163574] hub 1-0:1.0: 5 ports detected
- [ 3.163868] ehci-pci 0000:00:13.2: EHCI Host Controller
- [ 3.163931] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
- [ 3.163936] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 3.163945] ehci-pci 0000:00:13.2: debug port 1
- [ 3.163973] ehci-pci 0000:00:13.2: irq 17, io mem 0xf8ffa800
- [ 3.169231] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
- [ 3.169365] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.169368] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.169369] usb usb2: Product: EHCI Host Controller
- [ 3.169371] usb usb2: Manufacturer: Linux 4.1.12-gentoo ehci_hcd
- [ 3.169372] usb usb2: SerialNumber: 0000:00:13.2
- [ 3.169500] hub 2-0:1.0: USB hub found
- [ 3.169525] hub 2-0:1.0: 5 ports detected
- [ 3.169819] ehci-pci 0000:00:16.2: EHCI Host Controller
- [ 3.169877] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
- [ 3.169881] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 3.169889] ehci-pci 0000:00:16.2: debug port 1
- [ 3.169917] ehci-pci 0000:00:16.2: irq 17, io mem 0xf8ffac00
- [ 3.175237] tsc: Refined TSC clocksource calibration: 3210.710 MHz
- [ 3.175238] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
- [ 3.175247] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x2e47cf4de95, max_idle_ns: 440795203834 ns
- [ 3.175351] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.175354] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.175356] usb usb3: Product: EHCI Host Controller
- [ 3.175357] usb usb3: Manufacturer: Linux 4.1.12-gentoo ehci_hcd
- [ 3.175359] usb usb3: SerialNumber: 0000:00:16.2
- [ 3.175487] hub 3-0:1.0: USB hub found
- [ 3.175501] hub 3-0:1.0: 4 ports detected
- [ 3.175667] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.175679] ohci-pci: OHCI PCI platform driver
- [ 3.175783] ohci-pci 0000:00:12.0: OHCI PCI host controller
- [ 3.175833] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
- [ 3.175851] ohci-pci 0000:00:12.0: irq 18, io mem 0xf8ff3000
- [ 3.201225] fbcondecor: console 0 using theme 'natural_gentoo'
- [ 3.230317] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.230322] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.230324] usb usb4: Product: OHCI PCI host controller
- [ 3.230325] usb usb4: Manufacturer: Linux 4.1.12-gentoo ohci_hcd
- [ 3.230327] usb usb4: SerialNumber: 0000:00:12.0
- [ 3.230561] hub 4-0:1.0: USB hub found
- [ 3.230575] hub 4-0:1.0: 5 ports detected
- [ 3.230882] ohci-pci 0000:00:13.0: OHCI PCI host controller
- [ 3.230966] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
- [ 3.230993] ohci-pci 0000:00:13.0: irq 18, io mem 0xf8ff8000
- [ 3.268524] ata7.00: ATAPI: ATAPI iHOS104, WL0F, max UDMA/100
- [ 3.268527] ata7.00: limited to UDMA/33 due to 40-wire cable
- [ 3.274517] ata7.00: configured for UDMA/33
- [ 3.278673] fbcondecor: switched decor state to 'on' on console 0
- [ 3.283701] fbcondecor_help (926) used greatest stack depth: 13896 bytes left
- [ 3.285340] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.285343] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.285345] usb usb5: Product: OHCI PCI host controller
- [ 3.285346] usb usb5: Manufacturer: Linux 4.1.12-gentoo ohci_hcd
- [ 3.285348] usb usb5: SerialNumber: 0000:00:13.0
- [ 3.285504] hub 5-0:1.0: USB hub found
- [ 3.285512] hub 5-0:1.0: 5 ports detected
- [ 3.285740] ohci-pci 0000:00:14.5: OHCI PCI host controller
- [ 3.285811] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
- [ 3.285831] ohci-pci 0000:00:14.5: irq 18, io mem 0xf8ff9000
- [ 3.340354] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.340357] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.340359] usb usb6: Product: OHCI PCI host controller
- [ 3.340360] usb usb6: Manufacturer: Linux 4.1.12-gentoo ohci_hcd
- [ 3.340361] usb usb6: SerialNumber: 0000:00:14.5
- [ 3.340534] hub 6-0:1.0: USB hub found
- [ 3.340542] hub 6-0:1.0: 2 ports detected
- [ 3.340747] ohci-pci 0000:00:16.0: OHCI PCI host controller
- [ 3.340816] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
- [ 3.340836] ohci-pci 0000:00:16.0: irq 18, io mem 0xf8ffb000
- [ 3.395347] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.395351] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.395352] usb usb7: Product: OHCI PCI host controller
- [ 3.395354] usb usb7: Manufacturer: Linux 4.1.12-gentoo ohci_hcd
- [ 3.395355] usb usb7: SerialNumber: 0000:00:16.0
- [ 3.395532] hub 7-0:1.0: USB hub found
- [ 3.395540] hub 7-0:1.0: 4 ports detected
- [ 3.395656] uhci_hcd: USB Universal Host Controller Interface driver
- [ 3.395706] usbcore: registered new interface driver cdc_acm
- [ 3.395707] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 3.395725] usbcore: registered new interface driver usblp
- [ 3.395759] usbcore: registered new interface driver usb-storage
- [ 3.395799] usbcore: registered new interface driver usbserial
- [ 3.395811] usbcore: registered new interface driver usbserial_generic
- [ 3.395826] usbserial: USB Serial support registered for generic
- [ 3.395837] usbcore: registered new interface driver ftdi_sio
- [ 3.395849] usbserial: USB Serial support registered for FTDI USB Serial Device
- [ 3.395907] usbcore: registered new interface driver pl2303
- [ 3.395915] usbserial: USB Serial support registered for pl2303
- [ 3.395931] usbcore: registered new interface driver usblcd
- [ 3.395979] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 3.396396] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 3.396405] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 3.396560] mousedev: PS/2 mouse device common for all mice
- [ 3.396803] usbcore: registered new interface driver kbtab
- [ 3.396825] rtc_cmos 00:00: RTC can wake from S4
- [ 3.396924] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
- [ 3.396947] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 3.396959] i2c /dev entries driver
- [ 3.397034] usbcore: registered new interface driver dvb_usb_rtl28xxu
- [ 3.397062] usbcore: registered new interface driver uvcvideo
- [ 3.397062] USB Video Class driver (1.1.1)
- [ 3.397064] gspca_main: v2.14.0 registered
- [ 3.397067] md: linear personality registered for level -1
- [ 3.397069] md: raid0 personality registered for level 0
- [ 3.397071] md: raid1 personality registered for level 1
- [ 3.397161] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
- [ 3.397182] usbcore: registered new interface driver btusb
- [ 3.397208] hidraw: raw HID events driver (C) Jiri Kosina
- [ 3.397462] usbcore: registered new interface driver usbhid
- [ 3.397463] usbhid: USB HID core driver
- [ 3.397518] ashmem: initialized
- [ 3.397527] I2O subsystem v1.325
- [ 3.397528] i2o: max drivers = 8
- [ 3.398127] snd_hda_intel 0000:05:00.1: Disabling MSI
- [ 3.398161] Netfilter messages via NETLINK v0.30.
- [ 3.398172] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
- [ 3.398425] ctnetlink v0.93: registering with nfnetlink.
- [ 3.398513] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.398538] Initializing XFRM netlink socket
- [ 3.398691] NET: Registered protocol family 10
- [ 3.398927] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.398968] sit: IPv6 over IPv4 tunneling driver
- [ 3.399103] NET: Registered protocol family 17
- [ 3.399152] Bluetooth: RFCOMM TTY layer initialized
- [ 3.399155] Bluetooth: RFCOMM socket layer initialized
- [ 3.399160] Bluetooth: RFCOMM ver 1.11
- [ 3.399164] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 3.399165] Bluetooth: BNEP filters: protocol multicast
- [ 3.399166] Bluetooth: BNEP socket layer initialized
- [ 3.399169] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 3.399171] Bluetooth: HIDP socket layer initialized
- [ 3.399190] Key type dns_resolver registered
- [ 3.399709] registered taskstats version 1
- [ 3.400231] Btrfs loaded
- [ 3.400626] Magic number: 0:971:740
- [ 3.400729] console [netcon0] enabled
- [ 3.400730] netconsole: network logging started
- [ 3.400804] acpi-cpufreq: overriding BIOS provided _PSD data
- [ 3.401236] PM: Hibernation image not present or could not be loaded.
- [ 3.401239] ALSA device list:
- [ 3.401240] No soundcards found.
- [ 3.401255] Warning: unable to open an initial console.
- [ 3.407289] ata5: SATA link down (SStatus 0 SControl 300)
- [ 3.407302] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1818S: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
- [ 3.407305] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 3.407307] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
- [ 3.407308] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
- [ 3.407310] snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x21
- [ 3.407311] snd_hda_codec_via hdaudioC0D0: inputs:
- [ 3.407313] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
- [ 3.407315] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
- [ 3.407316] snd_hda_codec_via hdaudioC0D0: Line=0x1b
- [ 3.416164] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
- [ 3.465274] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 3.477290] usb 3-1: new high-speed USB device number 2 using ehci-pci
- [ 3.551356] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 3.551383] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 3.551411] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 3.551438] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 3.552637] ata1.00: ATA-9: SanDisk Ultra II 480GB, X41100RL, max UDMA/133
- [ 3.552640] ata1.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
- [ 3.553871] ata1.00: configured for UDMA/133
- [ 3.554065] scsi 0:0:0:0: Direct-Access ATA SanDisk Ultra II 00RL PQ: 0 ANSI: 5
- [ 3.554141] ata3.00: ATA-8: WDC WD10EARS-00MVWB0, 51.0AB51, max UDMA/133
- [ 3.554143] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 3.554392] sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
- [ 3.554440] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 3.554577] sd 0:0:0:0: [sda] Write Protect is off
- [ 3.554581] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 3.554616] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.555172] ata2.00: ATA-8: WDC WD10EARS-00MVWB0, 51.0AB51, max UDMA/133
- [ 3.555175] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 3.555373] sda: sda1 sda2
- [ 3.555772] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 3.556681] ata3.00: configured for UDMA/133
- [ 3.557742] ata4.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
- [ 3.557745] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 3.558071] ata2.00: configured for UDMA/133
- [ 3.558194] scsi 1:0:0:0: Direct-Access ATA WDC WD10EARS-00M AB51 PQ: 0 ANSI: 5
- [ 3.558449] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- [ 3.558471] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 3.558552] sd 1:0:0:0: [sdb] Write Protect is off
- [ 3.558555] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 3.558595] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.558601] scsi 2:0:0:0: Direct-Access ATA WDC WD10EARS-00M AB51 PQ: 0 ANSI: 5
- [ 3.558795] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- [ 3.558814] sd 2:0:0:0: Attached scsi generic sg2 type 0
- [ 3.558891] sd 2:0:0:0: [sdc] Write Protect is off
- [ 3.558893] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 3.558926] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.564177] ata4.00: configured for UDMA/133
- [ 3.564322] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1113 PQ: 0 ANSI: 5
- [ 3.564527] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- [ 3.564543] sd 3:0:0:0: Attached scsi generic sg3 type 0
- [ 3.564611] sd 3:0:0:0: [sdd] Write Protect is off
- [ 3.564615] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
- [ 3.564647] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.565805] scsi 6:0:0:0: CD-ROM ATAPI iHOS104 WL0F PQ: 0 ANSI: 5
- [ 3.566031] sd 2:0:0:0: [sdc] Attached SCSI disk
- [ 3.572120] sdd: sdd1
- [ 3.572484] sd 3:0:0:0: [sdd] Attached SCSI disk
- [ 3.582165] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 3.589827] sr 6:0:0:0: [sr0] scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
- [ 3.589830] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 3.589988] sr 6:0:0:0: Attached scsi CD-ROM sr0
- [ 3.590057] sr 6:0:0:0: Attached scsi generic sg4 type 5
- [ 3.594381] usb 3-1: New USB device found, idVendor=058f, idProduct=6362
- [ 3.594384] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 3.594385] usb 3-1: Product: Mass Storage Device
- [ 3.594387] usb 3-1: Manufacturer: Generic
- [ 3.594388] usb 3-1: SerialNumber: 058F312D81B
- [ 3.594780] usb-storage 3-1:1.0: USB Mass Storage device detected
- [ 3.594916] scsi host10: usb-storage 3-1:1.0
- [ 3.608315] usb 5-1: new low-speed USB device number 2 using ohci-pci
- [ 3.657448] firewire_core 0000:02:08.0: created device fw0: GUID 001fc6000006ed03, S400
- [ 3.696347] usb 3-3: new high-speed USB device number 3 using ehci-pci
- [ 3.702303] cfg80211: Calling CRDA to update world regulatory domain
- [ 3.752681] md: Waiting for all devices to be available before autodetect
- [ 3.752685] md: If you don't use raid, use raid=noautodetect
- [ 3.752883] md: Autodetecting RAID arrays.
- [ 3.752884] md: Scanned 0 and added 0 devices.
- [ 3.752885] md: autorun ...
- [ 3.752886] md: ... autorun DONE.
- [ 3.753133] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
- [ 3.753359] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
- [ 3.765405] usb 5-1: New USB device found, idVendor=046d, idProduct=c505
- [ 3.765408] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.765410] usb 5-1: Product: USB Receiver
- [ 3.765412] usb 5-1: Manufacturer: Logitech
- [ 3.765536] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.765551] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
- [ 3.767030] devtmpfs: mounted
- [ 3.767435] Freeing unused kernel memory: 1140K (ffffffff81d3f000 - ffffffff81e5c000)
- [ 3.767437] Write protecting the kernel read-only data: 12288k
- [ 3.767637] Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
- [ 3.767770] Freeing unused kernel memory: 216K (ffff880001bca000 - ffff880001c00000)
- [ 3.768512] kworker/u12:9 (1344) used greatest stack depth: 13064 bytes left
- [ 3.772493] usb 1-1: New USB device found, idVendor=046d, idProduct=08c2
- [ 3.772496] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=2
- [ 3.772498] usb 1-1: SerialNumber: 23E86390
- [ 3.772782] uvcvideo: Found UVC 1.00 device <unnamed> (046d:08c2)
- [ 3.773666] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/0003:046D:C505.0001/input/input6
- [ 3.794369] ata1.00: exception Emask 0x10 SAct 0x40000000 SErr 0x280100 action 0x6 frozen
- [ 3.794372] ata1.00: irq_stat 0x08000000, interface fatal error
- [ 3.794375] ata1: SError: { UnrecovData 10B8B BadCRC }
- [ 3.794378] ata1.00: failed command: READ FPDMA QUEUED
- [ 3.794381] ata1.00: cmd 60/e0:f0:c8:5a:ad/00:00:01:00:00/40 tag 30 ncq 114688 in
- res 40/00:f4:c8:5a:ad/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
- [ 3.794383] ata1.00: status: { DRDY }
- [ 3.794386] ata1: hard resetting link
- [ 3.819027] usb 3-3: New USB device found, idVendor=2109, idProduct=2811
- [ 3.819030] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.819031] usb 3-3: Product: USB2.0 Hub
- [ 3.819033] usb 3-3: Manufacturer: VIA Labs, Inc.
- [ 3.819390] hub 3-3:1.0: USB hub found
- [ 3.819634] hub 3-3:1.0: 4 ports detected
- [ 3.824510] hid-generic 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:13.0-1/input0
- [ 3.833863] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.1/0003:046D:C505.0002/input/input7
- [ 3.884619] hid-generic 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-1/input1
- [ 4.104442] usb 3-3.3: new high-speed USB device number 4 using ehci-pci
- [ 4.175559] Switched to clocksource tsc
- [ 4.194822] usb 3-3.3: New USB device found, idVendor=2109, idProduct=2811
- [ 4.194825] usb 3-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 4.194827] usb 3-3.3: Product: USB2.0 Hub
- [ 4.194828] usb 3-3.3: Manufacturer: VIA Labs, Inc.
- [ 4.195319] hub 3-3.3:1.0: USB hub found
- [ 4.195649] hub 3-3.3:1.0: 4 ports detected
- [ 4.254473] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 4.257026] ata1.00: configured for UDMA/133
- [ 4.257037] ata1: EH complete
- [ 4.310228] init-early.sh (1364) used greatest stack depth: 12840 bytes left
- [ 4.331494] ata1.00: exception Emask 0x10 SAct 0x4000000 SErr 0x280100 action 0x6 frozen
- [ 4.331497] ata1.00: irq_stat 0x08000000, interface fatal error
- [ 4.331499] ata1: SError: { UnrecovData 10B8B BadCRC }
- [ 4.331502] ata1.00: failed command: READ FPDMA QUEUED
- [ 4.331506] ata1.00: cmd 60/e0:d0:20:38:b8/00:00:01:00:00/40 tag 26 ncq 114688 in
- res 40/00:d4:20:38:b8/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
- [ 4.331508] ata1.00: status: { DRDY }
- [ 4.331511] ata1: hard resetting link
- [ 4.595188] scsi 10:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
- [ 4.595369] sd 10:0:0:0: Attached scsi generic sg5 type 0
- [ 4.596578] scsi 10:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
- [ 4.596715] sd 10:0:0:1: Attached scsi generic sg6 type 0
- [ 4.598466] scsi 10:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
- [ 4.598608] sd 10:0:0:2: Attached scsi generic sg7 type 0
- [ 4.599199] sd 10:0:0:0: [sde] Attached SCSI removable disk
- [ 4.601091] scsi 10:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
- [ 4.601222] sd 10:0:0:3: Attached scsi generic sg8 type 0
- [ 4.601814] sd 10:0:0:1: [sdf] Attached SCSI removable disk
- [ 4.603947] sd 10:0:0:2: [sdg] Attached SCSI removable disk
- [ 4.605188] sd 10:0:0:3: [sdh] Attached SCSI removable disk
- [ 4.791587] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 4.794137] ata1.00: configured for UDMA/133
- [ 4.794146] ata1: EH complete
- [ 4.834594] ata1.00: exception Emask 0x10 SAct 0x20000 SErr 0x280100 action 0x6 frozen
- [ 4.834597] ata1.00: irq_stat 0x08000000, interface fatal error
- [ 4.834600] ata1: SError: { UnrecovData 10B8B BadCRC }
- [ 4.834603] ata1.00: failed command: READ FPDMA QUEUED
- [ 4.834607] ata1.00: cmd 60/20:88:18:71:4e/00:00:11:00:00/40 tag 17 ncq 16384 in
- res 40/00:8c:18:71:4e/00:00:11:00:00/40 Emask 0x10 (ATA bus error)
- [ 4.834609] ata1.00: status: { DRDY }
- [ 4.834612] ata1: hard resetting link
- [ 5.294690] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 5.297229] ata1.00: configured for UDMA/133
- [ 5.297237] ata1: EH complete
- [ 5.344030] random: nonblocking pool is initialized
- [ 5.525754] ata1: limiting SATA link speed to 3.0 Gbps
- [ 5.525759] ata1.00: exception Emask 0x10 SAct 0x2 SErr 0x280100 action 0x6 frozen
- [ 5.525761] ata1.00: irq_stat 0x08000000, interface fatal error
- [ 5.525764] ata1: SError: { UnrecovData 10B8B BadCRC }
- [ 5.525766] ata1.00: failed command: READ FPDMA QUEUED
- [ 5.525770] ata1.00: cmd 60/08:08:58:1c:01/00:00:02:00:00/40 tag 1 ncq 4096 in
- res 40/00:0c:58:1c:01/00:00:02:00:00/40 Emask 0x10 (ATA bus error)
- [ 5.525772] ata1.00: status: { DRDY }
- [ 5.525776] ata1: hard resetting link
- [ 5.985836] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
- [ 5.988382] ata1.00: configured for UDMA/133
- [ 5.988390] ata1: EH complete
- [ 6.123200] ATK0110 ATK0110:00: adding...
- [ 6.123214] ATK0110 ATK0110:00: board ID = M4A87TD-EVO
- [ 6.123220] ATK0110 ATK0110:00: method RTMP not found: AE_NOT_FOUND
- [ 6.123222] ATK0110 ATK0110:00: method RVLT not found: AE_NOT_FOUND
- [ 6.123224] ATK0110 ATK0110:00: method RFAN not found: AE_NOT_FOUND
- [ 6.123227] ATK0110 ATK0110:00: Using new hwmon interface
- [ 6.126134] ATK0110 ATK0110:00: EC is disabled
- [ 6.126207] ATK0110 ATK0110:00: EC enabled
- [ 6.126209] ATK0110 ATK0110:00: Enumerating hwmon sensors
- [ 6.126249] ATK0110 ATK0110:00: voltage: 0x6020011 Vcore Voltage [800-800] enabled
- [ 6.126253] ATK0110 ATK0110:00: voltage: 0x6020063 +3.3V Voltage [2970-660] enabled
- [ 6.126256] ATK0110 ATK0110:00: voltage: 0x6020062 +5V Voltage [4500-1000] enabled
- [ 6.126259] ATK0110 ATK0110:00: voltage: 0x6020061 +12V Voltage [10200-3600] enabled
- [ 6.126261] ATK0110 ATK0110:00: temperature: 0x6030012 CPU Temperature [600-350] enabled
- [ 6.126264] ATK0110 ATK0110:00: temperature: 0x6030014 MB Temperature [450-300] enabled
- [ 6.126266] ATK0110 ATK0110:00: fan: 0x6040013 CPU Fan Speed [600-6600] enabled
- [ 6.126269] ATK0110 ATK0110:00: fan: 0x6040073 Chassis Fan Speed [600-6600] enabled
- [ 6.126271] ATK0110 ATK0110:00: fan: 0x60400c3 Power Fan Speed [600-6600] enabled
- [ 6.126274] ATK0110 ATK0110:00: registering hwmon device
- [ 6.126328] ATK0110 ATK0110:00: populating sysfs directory
- [ 6.141980] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB_.PCI0.SBRG.ASOC.SMRG) (20150410/utaddress-254)
- [ 6.141987] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 6.169359] cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected], frontend(s): 1
- [ 6.196146] cdrom_id (1663) used greatest stack depth: 12752 bytes left
- [ 6.214344] nvidia: module license 'NVIDIA' taints kernel.
- [ 6.214348] Disabling lock debugging due to kernel taint
- [ 6.228979] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 6.229144] nvidia-nvlink: Nvlink Core is being initialized, major device number 248
- [ 6.229159] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 358.16 Mon Nov 16 19:25:55 PST 2015
- [ 6.241122] BTRFS: device fsid cab3e03f-dbf2-4046-97b2-0bb5e3b51482 devid 2 transid 2283 /dev/sdc
- [ 6.251400] BTRFS: device fsid cab3e03f-dbf2-4046-97b2-0bb5e3b51482 devid 1 transid 2283 /dev/sdb
- [ 6.283035] cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner
- [ 6.296750] tda9887 0-0043: creating new instance
- [ 6.296752] tda9887 0-0043: tda988[5/6/7] found
- [ 6.297932] tuner 0-0043: Tuner 74 found with type(s) Radio TV.
- [ 6.299923] tuner 0-0061: Tuner -1 found with type(s) Radio TV.
- [ 6.355475] tveeprom 0-0050: Hauppauge model 96019, rev C6A0, serial# 4026962837
- [ 6.355477] tveeprom 0-0050: MAC address is 00:0d:fe:06:93:95
- [ 6.355478] tveeprom 0-0050: tuner model is Philips FMD1216ME (idx 100, type 63)
- [ 6.355480] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
- [ 6.355481] tveeprom 0-0050: audio processor is CX882 (idx 33)
- [ 6.355483] tveeprom 0-0050: decoder processor is CX882 (idx 25)
- [ 6.355484] tveeprom 0-0050: has radio, has IR receiver, has IR transmitter
- [ 6.355485] cx88[0]: hauppauge eeprom: model=96019
- [ 6.359178] tuner-simple 0-0061: creating new instance
- [ 6.359180] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
- [ 6.367126] IR keymap rc-hauppauge not found
- [ 6.367127] Registered IR keymap rc-empty
- [ 6.367183] input: i2c IR (cx88 Hauppauge XVR remo as /devices/virtual/rc/rc0/input8
- [ 6.367240] rc0: i2c IR (cx88 Hauppauge XVR remo as /devices/virtual/rc/rc0
- [ 6.367241] ir-kbd-i2c: i2c IR (cx88 Hauppauge XVR remo detected at i2c-0/0-0071/ir0 [cx88[0]]
- [ 6.368959] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
- [ 6.369308] cx88[0]/0: found at 0000:02:07.0, rev: 5, irq: 22, latency: 64, mmio: 0xfb000000
- [ 6.370680] wm8775 0-001b: chip found @ 0x36 (cx88[0])
- [ 6.384125] cx88[0]/0: registered device video0 [v4l2]
- [ 6.384154] cx88[0]/0: registered device vbi0
- [ 6.384182] cx88[0]/0: registered device radio0
- [ 6.384244] cx88[0]/2: cx2388x 8802 Driver Manager
- [ 6.384319] cx88[0]/2: found at 0000:02:07.2, rev: 5, irq: 22, latency: 64, mmio: 0xf9000000
- [ 6.386591] cx88/2: cx2388x dvb driver version 1.0.0 loaded
- [ 6.386594] cx88/2: registering cx8802 driver, type: dvb access: shared
- [ 6.386596] cx88[0]/2: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56]
- [ 6.386598] cx88[0]/2: cx2388x based DVB/ATSC card
- [ 6.386599] cx8802_alloc_frontends() allocating 1 frontend(s)
- [ 6.393610] tuner-simple 0-0061: unable to probe Philips FMD1216ME MK3 Hybrid Tuner, proceeding anyway.
- [ 6.395043] tuner-simple 0-0061: attaching existing instance
- [ 6.395046] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
- [ 6.399826] DVB: registering new adapter (cx88[0])
- [ 6.399830] cx88-mpeg driver manager 0000:02:07.2: DVB: registering adapter 0 frontend 0 (Conexant CX22702 DVB-T)...
- [ 6.402653] cx2388x blackbird driver version 1.0.0 loaded
- [ 6.402655] cx88/2: registering cx8802 driver, type: blackbird access: shared
- [ 6.402657] cx88[0]/2: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56]
- [ 6.402679] cx88[0]/2: cx23416 based mpeg encoder (blackbird reference design)
- [ 6.402905] cx88[0]/2-bb: Firmware and/or mailbox pointer not initialized or corrupted
- [ 6.845025] cfg80211: Calling CRDA to update world regulatory domain
- [ 6.873285] cfg80211: World regulatory domain updated:
- [ 6.873287] cfg80211: DFS Master region: unset
- [ 6.873287] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 6.873289] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 6.873290] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 6.873291] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 6.873292] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- [ 6.873293] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
- [ 6.873294] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
- [ 6.873295] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 6.873296] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 6.963196] input: UVC Camera (046d:08c2) as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input10
- [ 7.065061] usb 1-2: new high-speed USB device number 3 using ehci-pci
- [ 7.202048] usb 1-2: New USB device found, idVendor=045e, idProduct=075d
- [ 7.202050] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 7.202051] usb 1-2: Product: Microsoft\xffffffc2\xffffffae LifeCam Cinema(TM)
- [ 7.202052] usb 1-2: Manufacturer: Microsoft
- [ 7.203190] uvcvideo: Found UVC 1.00 device Microsoft\xffffffc2\xffffffae LifeCam Cinema(TM) (045e:075d)
- [ 7.208370] input: Microsoft\xffffffc2\xffffffae LifeCam Cinema(TM) as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/input/input11
- [ 7.538154] usb 4-3: new full-speed USB device number 2 using ohci-pci
- [ 7.704222] usb 4-3: New USB device found, idVendor=0a12, idProduct=0001
- [ 7.704223] usb 4-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
- [ 7.704225] usb 4-3: Product: CSR8510 A10
- [ 8.400245] usb 1-1: Warning! Unlikely big volume range (=3072), cval->res is probably wrong.
- [ 8.400248] usb 1-1: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1
- [ 8.526392] usbcore: registered new interface driver snd-usb-audio
- [ 9.361743] cx88[0]/2-bb: Firmware upload successful.
- [ 9.365478] cx88[0]/2-bb: Firmware version is 0x02060039
- [ 9.380283] cx88[0]/2: registered device video3 [mpeg]
- [ 9.380425] modprobe (1694) used greatest stack depth: 12032 bytes left
- [ 9.588588] usb 4-4: new full-speed USB device number 3 using ohci-pci
- [ 9.743697] usb 4-4: New USB device found, idVendor=046d, idProduct=c52f
- [ 9.743701] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 9.743703] usb 4-4: Product: USB Receiver
- [ 9.743705] usb 4-4: Manufacturer: Logitech
- [ 9.751900] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/0003:046D:C52F.0003/input/input12
- [ 9.752012] hid-generic 0003:046D:C52F.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-4/input0
- [ 9.759799] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.1/0003:046D:C52F.0004/input/input13
- [ 9.810773] hid-generic 0003:046D:C52F.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-4/input1
- [ 10.037691] usb 4-5: new full-speed USB device number 4 using ohci-pci
- [ 10.194790] usb 4-5: New USB device found, idVendor=04d8, idProduct=0002
- [ 10.194793] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 10.194795] usb 4-5: Product: USB-LCD-20x2
- [ 10.194796] usb 4-5: Manufacturer: ITUNER INC
- [ 10.194797] usb 4-5: SerialNumber: 1.57rel.
- [ 10.212851] input: ITUNER INC USB-LCD-20x2 as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/0003:04D8:0002.0005/input/input14
- [ 10.263856] hid-generic 0003:04D8:0002.0005: input,hiddev0,hidraw4: USB HID v1.01 Device [ITUNER INC USB-LCD-20x2] on usb-0000:00:12.0-5/input0
- [ 10.431635] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro,user_xattr
- [ 10.503975] Adding 1048572k swap on /dev/sda2. Priority:-1 extents:1 across:1048572k SS
- [ 10.529480] BTRFS info (device sdb): disk space caching is enabled
- [ 12.075819] r8169 0000:01:00.0 eth0: link down
- [ 12.075830] r8169 0000:01:00.0 eth0: link down
- [ 12.075851] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 12.075967] ip (2696) used greatest stack depth: 11528 bytes left
- [ 14.055857] r8169 0000:01:00.0 eth0: link up
- [ 14.055866] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 14.900432] fbcondecor: console 1 using theme 'natural_gentoo'
- [ 14.965891] fbcondecor: switched decor state to 'on' on console 1
- [ 15.031222] fbcondecor: console 2 using theme 'natural_gentoo'
- [ 15.095300] fbcondecor: switched decor state to 'on' on console 2
- [ 15.159763] fbcondecor: console 3 using theme 'natural_gentoo'
- [ 15.223879] fbcondecor: switched decor state to 'on' on console 3
- [ 15.291948] fbcondecor: console 4 using theme 'natural_gentoo'
- [ 15.359007] fbcondecor: switched decor state to 'on' on console 4
- [ 15.429213] fbcondecor: console 5 using theme 'natural_gentoo'
- [ 15.494434] fbcondecor: switched decor state to 'on' on console 5
- [ 16.193718] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 358.16 Mon Nov 16 18:58:09 PST 2015
- [ 16.194053] nvidia-modeset: Allocated GPU:0 (GPU-d60b10d0-64c9-088c-9695-566285ba8537) @ PCI:0000:05:00.0
- [ 16.391007] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 30
- [ 17.559369] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
- [ 17.559631] NFSD: starting 90-second grace period (net ffffffff81ce87c0)
- [ 30.193505] usb 1-1: reset high-speed USB device number 2 using ehci-pci
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement