API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Sep 19th, 2013
60
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 61.55 KB | None | 0 0
raw download clone embed print report
  1. <6>[ 0.000000] Initializing cgroup subsys cpu
  2. <5>[ 0.000000] Linux version 3.0.88-HumberOS-v1.35-00773-g2c194f5 (stimpz@kritical) (gcc version 4.7 (GCC) ) #1 PREEMPT Mon Aug 5 07:53:00 EST 2013
  3. <4>[ 0.000000] CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7d
  4. <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. <4>[ 0.000000] Machine: P1C
  6. <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
  7. <4>[ 0.000000] CPU S5PV210/S5PC110 (id 0x43110221)
  8. <7>[ 0.000000] s5pv210_init_clocks: initializing clocks
  9. <6>[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
  10. <4>[ 0.000000] s3c24xx_register_clock: new clock sclk_csis, id -1, dev (null) uses same enable bit as mout_csis, id -1, dev (null)
  11. <4>[ 0.000000] s3c24xx_register_clock: new clock lcd, id -1, dev (null) uses same enable bit as sclk_fimd, id -1, dev (null)
  12. <4>[ 0.000000] s3c24xx_register_clock: new clock mfc, id -1, dev (null) uses same enable bit as sclk_mfc, id -1, dev (null)
  13. <4>[ 0.000000] s3c24xx_register_clock: new clock iis, id 0, dev (null) uses same enable bit as i2s_v50, id 0, dev (null)
  14. <7>[ 0.000000] s5pv210_setup_clocks: registering clocks
  15. <7>[ 0.000000] s5pv210_setup_clocks: clkdiv0 = 14131330, clkdiv1 = 00d00400
  16. <7>[ 0.000000] s5pv210_setup_clocks: xtal is 24000000
  17. <6>[ 0.000000] S5PV210: PLL settings, A=800000000, M=667000000, E=96000000 V=54000000
  18. <6>[ 0.000000] S5PV210: ARMCLK=800000000, HCLKM=200000000, HCLKD=166750000
  19. <6>[ 0.000000] HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
  20. <6>[ 0.000000] sclk_dmc: source is mout_mpll (1), rate is 166750000
  21. <6>[ 0.000000] sclk_onenand: source is hclk_dsys (1), rate is 166750000
  22. <6>[ 0.000000] sclk: source is mout_mpll (6), rate is 133400000
  23. <6>[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
  24. <6>[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
  25. <6>[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
  26. <6>[ 0.000000] sclk_mixer: source is sclk_dac (0), rate is 54000000
  27. <6>[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
  28. <6>[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
  29. <6>[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
  30. <6>[ 0.000000] sclk_cam: source is xusbxti (1), rate is 24000000
  31. <6>[ 0.000000] sclk_cam: source is ext_xtal (0), rate is 24000000
  32. <6>[ 0.000000] sclk_fimd: source is mout_mpll (6), rate is 47642857
  33. <6>[ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 51307692
  34. <6>[ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
  35. <6>[ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
  36. <6>[ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
  37. <6>[ 0.000000] sclk_mfc: source is sclk_a2m (0), rate is 200000000
  38. <6>[ 0.000000] sclk_fimg2d: source is sclk_a2m (0), rate is 200000000
  39. <6>[ 0.000000] sclk: source is mout_mpll (1), rate is 66700000
  40. <6>[ 0.000000] sclk_csis: source is ext_xtal (0), rate is 24000000
  41. <6>[ 0.000000] sclk_spi: source is mout_epll (7), rate is 96000000
  42. <6>[ 0.000000] sclk_spi: source is mout_epll (7), rate is 96000000
  43. <6>[ 0.000000] sclk_pwi: source is ext_xtal (0), rate is 24000000
  44. <6>[ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
  45. <6>[ 0.000000] sclk_mdnie: source is mout_mpll (6), rate is 47642857
  46. <6>[ 0.000000] sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000
  47. <6>[ 0.000000] s5p: 14680064 bytes system memory reserved for mfc at 0x34200000, 0-bank base(0x34200000)
  48. <6>[ 0.000000] s5p: 22020096 bytes system memory reserved for mfc at 0x4eb00000, 1-bank base(0x4eb00000)
  49. <6>[ 0.000000] s5p: 12582912 bytes system memory reserved for fimc0 at 0x4df00000, 1-bank base(0x4df00000)
  50. <6>[ 0.000000] s5p: 12582912 bytes system memory reserved for fimc2 at 0x4d300000, 1-bank base(0x4d300000)
  51. <6>[ 0.000000] s5p: 8388608 bytes system memory reserved for jpeg at 0x34200000, 0-bank base(0x34200000)
  52. <6>[ 0.000000] s5p: 12288000 bytes system memory reserved for fimd at 0x4c748000, 1-bank base(0x4c748000)
  53. <7>[ 0.000000] On node 0 totalpages: 133192
  54. <7>[ 0.000000] Normal zone: 1534 pages used for memmap
  55. <7>[ 0.000000] Normal zone: 0 pages reserved
  56. <7>[ 0.000000] Normal zone: 131658 pages, LIFO batch:31
  57. <7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  58. <7>[ 0.000000] pcpu-alloc: [0] 0
  59. <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 131658
  60. <5>[ 0.000000] Kernel command line: console=ttySAC2,115200 loglevel=4
  61. <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  62. <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  63. <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  64. <6>[ 0.000000] Memory: 66MB 199MB 255MB = 520MB total
  65. <5>[ 0.000000] Memory: 504368k/576784k available, 28400k reserved, 0K highmem
  66. <5>[ 0.000000] Virtual kernel memory layout:
  67. <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  68. <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  69. <5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  70. <5>[ 0.000000] vmalloc : 0xf0000000 - 0xfc000000 ( 192 MB)
  71. <5>[ 0.000000] lowmem : 0xc0000000 - 0xeff00000 ( 767 MB)
  72. <5>[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  73. <5>[ 0.000000] .init : 0xc0008000 - 0xc0572000 (5544 kB)
  74. <5>[ 0.000000] .text : 0xc0572000 - 0xc143a000 (15136 kB)
  75. <5>[ 0.000000] .data : 0xc143a000 - 0xc14d1260 ( 605 kB)
  76. <5>[ 0.000000] .bss : 0xc14d1284 - 0xc163f948 (1466 kB)
  77. <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  78. <6>[ 0.000000] Preemptible hierarchical RCU implementation.
  79. <6>[ 0.000000] NR_IRQS:339
  80. <6>[ 0.000000] VIC @fc000000: id 0x00041192, vendor 0x41
  81. <6>[ 0.000000] VIC @fc010000: id 0x00041192, vendor 0x41
  82. <6>[ 0.000000] VIC @fc020000: id 0x00041192, vendor 0x41
  83. <6>[ 0.000000] VIC @fc030000: id 0x00041192, vendor 0x41
  84. <6>[ 0.000000] mult[140737]
  85. <6>[ 0.000000] max_delta_ns[2937815369]
  86. <6>[ 0.000000] min_delta_ns[30517]
  87. <6>[ 0.000000] rate[32768]
  88. <6>[ 0.000000] HZ[256]
  89. <6>[ 0.000000] Console: colour dummy device 80x30
  90. <6>[ 0.000000] console [ttySAC2] enabled
  91. <6>[ 0.000236] Calibrating delay loop... 795.12 BogoMIPS (lpj=1554432)
  92. <6>[ 0.027241] pid_max: default: 32768 minimum: 301
  93. <6>[ 0.027378] Security Framework initialized
  94. <6>[ 0.027427] SELinux: Initializing.
  95. <7>[ 0.027468] SELinux: Starting in permissive mode
  96. <6>[ 0.027516] Mount-cache hash table entries: 512
  97. <6>[ 0.027840] Initializing cgroup subsys debug
  98. <6>[ 0.027853] Initializing cgroup subsys cpuacct
  99. <6>[ 0.027870] Initializing cgroup subsys freezer
  100. <6>[ 0.027898] CPU: Testing write buffer coherency: ok
  101. <6>[ 0.028061] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  102. <6>[ 0.030227] print_constraints: dummy:
  103. <6>[ 0.030372] NET: Registered protocol family 16
  104. <4>[ 0.033112] clk_get: could not find clock (null) for dev s5pv210_device_fiqdbg_uart2+0x8/0xd8 (fiq_debugger.2)
  105. <6>[ 0.036576] console [ttyFIQ0] enabled
  106. <6>[ 0.036648] Registered FIQ tty driver ef865cc0
  107. <6>[ 0.038568] ram_console: got buffer at 5ff00000, size ff000
  108. <6>[ 0.038719] ram_console: uncorrectable error in header
  109. <6>[ 0.038728] ram_console: no valid data in buffer (sig = 0xffffffff)
  110. <6>[ 0.038806] console [ram-1] enabled
  111. <6>[ 0.039015] S5PC110 Hardware version : EVT1
  112. <5>[ 0.041801] p1_get_hwrev: HWREV (0x12), Model (P1C)
  113. <6>[ 0.046645] HWREV is 0x12
  114. <4>[ 0.049832] S3C Power Management, Copyright 2004 Simtec Electronics
  115. <6>[ 0.055486] pmstats at 5ffff000
  116. <3>[ 0.058631] invalid media device
  117. <3>[ 0.061863] invalid media device
  118. <7>[ 0.065019] Universal :SD Detect configuration
  119. <6>[ 0.069869] hw-breakpoint: debug architecture 0x4 unsupported.
  120. <6>[ 0.075690] S5PV210: Initializing architecture
  121. <6>[ 0.079922] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
  122. <6>[ 0.088168] s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
  123. <6>[ 0.096572] s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12
  124. <6>[ 0.104994] s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16
  125. <6>[ 0.114158] print_constraints: pd_audio_supply: 5000 mV normal
  126. <6>[ 0.119549] print_constraints: pd_cam_supply: 5000 mV normal
  127. <6>[ 0.125179] print_constraints: pd_tv_supply: 5000 mV normal
  128. <6>[ 0.130863] print_constraints: pd_lcd_supply: 5000 mV normal
  129. <6>[ 0.136516] print_constraints: pd_g3d_supply: 5000 mV normal
  130. <6>[ 0.142315] print_constraints: pd_mfc_supply: 5000 mV normal
  131. <6>[ 0.154739] bio: create slab <bio-0> at 0
  132. <5>[ 0.158046] SCSI subsystem initialized
  133. <6>[ 0.161225] usbcore: registered new interface driver usbfs
  134. <6>[ 0.166612] usbcore: registered new interface driver hub
  135. <6>[ 0.171971] usbcore: registered new device driver usb
  136. <6>[ 0.177368] i2c-gpio i2c-gpio.4: using pins 247 (SDA) and 246 (SCL)
  137. <6>[ 0.183331] i2c-gpio i2c-gpio.5: using pins 203 (SDA) and 204 (SCL)
  138. <3>[ 0.190653] Trying to set irq flags for IRQ339
  139. <3>[ 0.193811] Trying to set irq flags for IRQ340
  140. <3>[ 0.198162] Trying to set irq flags for IRQ341
  141. <3>[ 0.202645] Trying to set irq flags for IRQ342
  142. <3>[ 0.206999] Trying to set irq flags for IRQ343
  143. <3>[ 0.211418] Trying to set irq flags for IRQ344
  144. <3>[ 0.215902] Trying to set irq flags for IRQ345
  145. <3>[ 0.220257] Trying to set irq flags for IRQ346
  146. <3>[ 0.224741] Trying to set irq flags for IRQ347
  147. <3>[ 0.229097] Trying to set irq flags for IRQ348
  148. <3>[ 0.233516] Trying to set irq flags for IRQ349
  149. <3>[ 0.238001] Trying to set irq flags for IRQ350
  150. <3>[ 0.242355] Trying to set irq flags for IRQ351
  151. <3>[ 0.246838] Trying to set irq flags for IRQ352
  152. <3>[ 0.251195] Trying to set irq flags for IRQ353
  153. <3>[ 0.255613] Trying to set irq flags for IRQ354
  154. <3>[ 0.260099] Trying to set irq flags for IRQ355
  155. <3>[ 0.264453] Trying to set irq flags for IRQ356
  156. <6>[ 0.270026] print_constraints: VALIVE_1.2V: 1200 mV
  157. <6>[ 0.274841] print_constraints: VUSB_1.1V: 1100 mV
  158. <6>[ 0.279592] print_constraints: VADC_3.3V: 3300 mV
  159. <6>[ 0.283967] print_constraints: VTF_2.8V: 2800 mV
  160. <6>[ 0.288578] print_constraints: VUSB_3.3V: 3300 mV
  161. <6>[ 0.293873] print_constraints: VCC_2.8V_PDA: 2800 mV
  162. <6>[ 0.298386] print_constraints: CAM_IO_2.8V: 2800 mV
  163. <6>[ 0.303312] print_constraints: CAM_CIF_1.5V: 1500 mV
  164. <6>[ 0.308340] print_constraints: CAM_A_2.8V: 2800 mV
  165. <6>[ 0.313192] print_constraints: CAM_3M_1.2V: 1200 mV
  166. <6>[ 0.318213] print_constraints: CAM_AF_3.0V: 3000 mV
  167. <6>[ 0.323078] print_constraints: MOTOR_3.4V: 3400 mV
  168. <6>[ 0.328444] print_constraints: LVDS_VDD3.3V: 3300 mV
  169. <6>[ 0.332765] print_constraints: VDD_ARM: 750 <--> 1500 mV at 1300 mV
  170. <6>[ 0.339172] print_constraints: VDD_INT: 750 <--> 1500 mV at 1150 mV
  171. <6>[ 0.346044] print_constraints: VCC_1.8V: 1800 mV
  172. <6>[ 0.350357] print_constraints: USB_VBUS_AP: 5000 mV
  173. <6>[ 0.355223] print_constraints: USB_VBUS_CP: 5000 mV
  174. <3>[ 0.359864] i2c i2c-6: Failed to register i2c client rtc_max8998 at 0x06 (-16)
  175. <3>[ 0.366803] i2c i2c-6: Can't create device at 0x06
  176. <6>[ 0.371633] i2c-gpio i2c-gpio.6: using pins 206 (SDA) and 209 (SCL)
  177. <6>[ 0.377928] i2c-gpio i2c-gpio.7: using pins 195 (SDA) and 191 (SCL)
  178. <6>[ 0.384185] i2c-gpio i2c-gpio.8: using pins 42 (SDA) and 43 (SCL)
  179. <6>[ 0.390229] i2c-gpio i2c-gpio.9: using pins 201 (SDA) and 200 (SCL)
  180. <6>[ 0.396531] i2c-gpio i2c-gpio.11: using pins 188 (SDA) and 189 (SCL)
  181. <6>[ 0.402789] i2c-gpio i2c-gpio.13: using pins 240 (SDA) and 241 (SCL)
  182. <6>[ 0.409237] i2c-gpio i2c-gpio.10: using pins 197 (SDA) and 198 (SCL)
  183. <6>[ 0.415532] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
  184. <6>[ 0.420919] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
  185. <6>[ 0.426221] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
  186. <6>[ 0.431742] Advanced Linux Sound Architecture Driver Version 1.0.24.
  187. <6>[ 0.438150] Bluetooth: Core ver 2.16
  188. <6>[ 0.441435] NET: Registered protocol family 31
  189. <6>[ 0.445743] Bluetooth: HCI device and connection manager initialized
  190. <6>[ 0.452134] Bluetooth: HCI socket layer initialized
  191. <6>[ 0.456927] Bluetooth: L2CAP socket layer initialized
  192. <6>[ 0.462025] Bluetooth: SCO socket layer initialized
  193. <6>[ 0.467217] Switching to clocksource clock_source_systimer
  194. <6>[ 0.472367] cfg80211: Calling CRDA to update world regulatory domain
  195. <6>[ 0.480392] Switched to NOHz mode on CPU #0
  196. <6>[ 0.495047] NET: Registered protocol family 2
  197. <6>[ 0.498241] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
  198. <6>[ 0.505587] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  199. <6>[ 0.512676] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
  200. <6>[ 0.519077] TCP: Hash tables configured (established 32768 bind 32768)
  201. <6>[ 0.525216] TCP reno registered
  202. <6>[ 0.528404] UDP hash table entries: 512 (order: 1, 8192 bytes)
  203. <6>[ 0.534166] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
  204. <6>[ 0.540712] NET: Registered protocol family 1
  205. <6>[ 0.544949] RPC: Registered named UNIX socket transport module.
  206. <6>[ 0.550697] RPC: Registered udp transport module.
  207. <6>[ 0.555289] RPC: Registered tcp transport module.
  208. <6>[ 0.559966] RPC: Registered tcp NFSv4.1 backchannel transport module.
  209. <6>[ 0.583487] PMU: registered new PMU device of type 0
  210. <4>[ 0.587681] clk_get: could not find clock emu_src_ck for dev s5pv210_etb_device+0x0/0x100 (etb)
  211. <6>[ 0.756068] wake enabled for irq 165
  212. <6>[ 0.758331] wake disabled for irq 165
  213. <4>[ 0.762653] level device init
  214. <6>[ 0.764923] S5PV210 ADC driver, (c) 2010 Samsung Electronics
  215. <6>[ 0.770752] cpuidle: phy_regs_save:0x5f38f000
  216. <4>[ 0.774818] [SEC JACK] (sec_jack_init,659)
  217. <6>[ 0.778985] SEC JACK: Registering jack driver
  218. <6>[ 0.783502] input: sec_jack as /devices/virtual/input/input0
  219. <4>[ 0.788943] [SEC JACK] (sec_jack_probe,508) registering switch_sendend switch_dev sysfs sec_jack
  220. <4>[ 0.798006] [SEC JACK] (sec_jack_probe,549) sended isr send=0X2c, ret =0
  221. <6>[ 0.804451] wake enabled for irq 44
  222. <6>[ 0.807820] wake disabled for irq 44
  223. <4>[ 0.811428] [SEC JACK] (sec_jack_probe,572) det isr det=0X28, ret =0
  224. <6>[ 0.817778] wake enabled for irq 40
  225. <4>[ 0.821169] EAR_MICBIAS Init
  226. <4>[ 0.824032] [SEC JACK] (jack_detect_change,175)
  227. <6>[ 0.828834] Loaded driver for PL330 DMAC-0 s3c-pl330
  228. <4>[ 0.833567] JACK dev detached 0
  229. <6>[ 0.836769] DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
  230. <6>[ 0.842959] Loaded driver for PL330 DMAC-1 s3c-pl330
  231. <6>[ 0.847771] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  232. <6>[ 0.853959] Loaded driver for PL330 DMAC-2 s3c-pl330
  233. <6>[ 0.858775] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  234. <6>[ 0.865090] audit: initializing netlink socket (disabled)
  235. <5>[ 0.870249] type=2000 audit(0.773:1): initialized
  236. <6>[ 0.875622] ashmem: initialized
  237. <6>[ 0.885775] Installing knfsd (copyright (C) 1996 [email protected]).
  238. <6>[ 0.891343] NTFS driver 2.1.30 [Flags: R/W].
  239. <6>[ 0.895360] ROMFS MTD (C) 2007 Red Hat, Inc.
  240. <7>[ 0.899348] yaffs: yaffs built Aug 5 2013 06:20:23 Installing.
  241. <6>[ 0.905210] msgmni has been set to 985
  242. <7>[ 0.908908] SELinux: Registering netfilter hooks
  243. <6>[ 0.914934] io scheduler noop registered
  244. <6>[ 0.917481] io scheduler deadline registered
  245. <6>[ 0.921736] io scheduler row registered (default)
  246. <6>[ 0.926548] io scheduler cfq registered
  247. <6>[ 0.930207] io scheduler sio registered
  248. <6>[ 0.934025] io scheduler zen registered
  249. <4>[ 0.938006] cmc623_pwm Probe START!!!
  250. <6>[ 0.941561] cmc623_pwm_bl cmc623_pwm_bl: cmc623_pwm backlight driver is enabled.
  251. <4>[ 0.948900] cmc623_pwm Probe END!!!
  252. <4>[ 0.952557] MDNIE INIT ..........
  253. <6>[ 0.955683] S3C MDNIE Driver, (c) 2010 Samsung Electronics
  254. <4>[ 0.961213] MDNIE INIT SUCCESS Addr : 0xf0022000
  255. <4>[ 0.965839] IELCD INIT ..........
  256. <6>[ 0.969260] S3C IELCD Driver, (c) 2010 Samsung Electronics
  257. <4>[ 0.974661] IELCD INIT SUCCESS Addr : 0xf0040000
  258. <6>[ 0.979603] s3cfb s3cfb: [fb2] dma: 0x4ce50000, cpu: 0xf0800000, size: 0x004b0000
  259. <6>[ 0.995830] FIMD src sclk = 27000000
  260. <6>[ 0.998017] s3cfb s3cfb: pixclock adjusted from 21063 to 37037
  261. <6>[ 1.003939] [mDNIe] mDNIe_tuning_initialize: addr(0x84), data(0x0)
  262. <6>[ 1.010154] [mDNIe] mDNIe_tuning_initialize: addr(0x90), data(0x0)
  263. <6>[ 1.016539] [mDNIe] mDNIe_tuning_initialize: addr(0x94), data(0xfff)
  264. <6>[ 1.023041] [mDNIe] mDNIe_tuning_initialize: addr(0x98), data(0x5c)
  265. <6>[ 1.029386] [mDNIe] mDNIe_tuning_initialize: addr(0x9c), data(0x12)
  266. <6>[ 1.035863] [mDNIe] mDNIe_tuning_initialize: addr(0xac), data(0x0)
  267. <6>[ 1.042125] [mDNIe] mDNIe_tuning_initialize: addr(0xb4), data(0x3ff)
  268. <4>[ 1.048691] [mDNIe] mDNIe_Set_Mode: current_mDNIe_UI(0), current_mDNIe_OutDoor_OnOff(0)
  269. <6>[ 1.056873] s3cfb s3cfb: registered successfully
  270. <6>[ 1.062088] lms700_probe::599->lms700 probed successfuly
  271. <6>[ 1.066766] HWREV : 18
  272. <6>[ 1.069162] lcd_adc : 4095
  273. <6>[ 1.071664] LCD_TYPE_PLS
  274. <6>[ 1.074188] LCD vendor: HYDIS PLS
  275. <6>[ 1.077644] sec_tune_cmc623_i2c 13-0038: cmc623 i2c probe success!!!
  276. <6>[ 1.083882] cmc623_cabc_enable_flag(0)
  277. <4>[ 1.096840] [cmc623] cmc623_Set_Mode: current_cmc623_UI(0), current_cmc623_CABC_OnOff(0)->(0) / OVE : 0
  278. <6>[ 1.105409] s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
  279. <6>[ 1.123279] s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
  280. <6>[ 1.138927] s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
  281. <4>[ 1.157024] PA FB = 0x4CE50000, bits per pixel = 32
  282. <4>[ 1.157224] screen width=1024 height=600 va=0xdce50000 pa=0x4ce50000
  283. <4>[ 1.157353] xres_virtual = 1024, yres_virtual = 1200, xoffset = 0, yoffset = 0
  284. <4>[ 1.157551] fb_size=4915200
  285. <4>[ 1.157655] Back frameBuffer[0].VAddr=dd0a8000 PAddr=4d0a8000 size=2457600
  286. <4>[ 1.157853] No space for NV12 video carveout
  287. <6>[ 1.161850] brd: module loaded
  288. <6>[ 1.163813] loop: module loaded
  289. <6>[ 1.163955] Android kernel panic handler initialized (bind=kpanic)
  290. <6>[ 1.165425] wake enabled for irq 167
  291. <6>[ 1.165978] fsa9480 7-0025: prev_dev1: 0x0, prev_dev2: 0x0
  292. <6>[ 1.166112] fsa9480 7-0025: new_dev1: 0x0, new_dev2: 0x0
  293. <4>[ 1.166338] sec_switch_get_regulator
  294. <4>[ 1.166456] sec_switch_set_switch_status (switch_status : 0)
  295. <4>[ 1.166578] sec_switch_set_regulator (mode : 1)
  296. <4>[ 1.170172] [modemctl_init]
  297. <4>[ 1.170327] [modemctl_probe]
  298. <6>[ 1.170550] wake enabled for irq 47
  299. <6>[ 1.170746] wake enabled for irq 171
  300. <4>[ 1.170880] [onedram_init]
  301. <4>[ 1.171014] [onedram_probe]
  302. <6>[ 1.171485] wake enabled for irq 43
  303. <4>[ 1.171774] [svnet_init]
  304. <3>[ 1.174441] pdp_activate, id: 1
  305. <3>[ 1.174623] ttyCSD(id: 1) serial device is created.
  306. <3>[ 1.174806] pdp_activate, id: 7
  307. <3>[ 1.174980] ttyCDMA(id: 7) serial device is created.
  308. <3>[ 1.175098] pdp_activate, id: 9
  309. <3>[ 1.175336] ttyTRFB(id: 9) serial device is created.
  310. <3>[ 1.175467] Filed to request GPIO_PHONE_RST_N!
  311. <3>[ 1.175583] Filed to request GPIO_PDA_ACTIVE!
  312. <3>[ 1.176112] [OneDRAM] register_interrupt_handler:2345 - <3>DPRAM interrupt handler failed.
  313. <4>[ 1.176333] dpram-device: probe of dpram-device failed with error -1
  314. <6>[ 1.176495] deepidle_init misc_register(deepidle)
  315. <6>[ 1.177333] Muxed OneNAND 512MB 1.8V 16-bit (0x50)
  316. <6>[ 1.177451] OneNAND version = 0x0241
  317. <7>[ 1.177556] Chip support all block unlock
  318. <7>[ 1.177729] Chip has 4KiB pagesize
  319. <7>[ 1.177843] Chip has cache program feature
  320. <6>[ 1.181848] Scanning device for bad blocks
  321. <4>[ 1.189073] fsa9480_manual_switching: SWITCH_V_Audio_Port (4)
  322. <6>[ 1.189588] modemctl xmm: PHONE ACTIVE: 0
  323. <7>[ 2.338353] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x56e addr8 0x0
  324. <6>[ 2.338560] OneNAND eraseblock 1390 is an initial bad block
  325. <6>[ 2.882979] OneNAND eraseblock 2047 is an initial bad block
  326. <5>[ 2.883104] Creating 4 MTD partitions on "(null)":
  327. <5>[ 2.883291] 0x000001200000-0x000001980000 : "boot"
  328. <5>[ 2.884059] 0x000001980000-0x000002100000 : "recovery"
  329. <5>[ 2.884788] 0x000002100000-0x00001f500000 : "system"
  330. <5>[ 2.886361] 0x00001f500000-0x000020000000 : "reservoir"
  331. <6>[ 2.887090] PPP generic driver version 2.4.2
  332. <6>[ 2.887372] PPP Deflate Compression module registered
  333. <6>[ 2.887492] PPP BSD Compression module registered
  334. <6>[ 2.888311] PPP MPPE Compression module registered
  335. <6>[ 2.888429] NET: Registered protocol family 24
  336. <6>[ 2.889918] tun: Universal TUN/TAP device driver, 1.6
  337. <6>[ 2.890105] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  338. <6>[ 2.890381] usbcore: registered new interface driver cdc_acm
  339. <6>[ 2.890570] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  340. <6>[ 2.890774] Initializing USB Mass Storage driver...
  341. <6>[ 2.890941] usbcore: registered new interface driver usb-storage
  342. <6>[ 2.891130] USB Mass Storage support registered.
  343. <6>[ 2.891354] usbcore: registered new interface driver usbserial
  344. <6>[ 2.891514] USB Serial support registered for generic
  345. <6>[ 2.891739] usbcore: registered new interface driver usbserial_generic
  346. <6>[ 2.891931] usbserial: USB Serial Driver core
  347. <6>[ 2.892074] USB Serial support registered for FTDI USB Serial Device
  348. <6>[ 2.892252] usbcore: registered new interface driver ftdi_sio
  349. <6>[ 2.892440] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
  350. <6>[ 2.892753] s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
  351. <6>[ 2.892761] s3c-udc : version 15 March 2009 (DMA Mode)
  352. <6>[ 2.894204] android_usb gadget: Mass Storage Function, version: 2009/09/11
  353. <6>[ 2.894343] android_usb gadget: Number of LUNs=1
  354. <6>[ 2.894523] lun0: LUN: removable file: (no medium)
  355. <6>[ 2.894824] android_usb gadget: android_usb ready
  356. <7>[ 2.899516] Registered gadget driver 'android_usb'
  357. <6>[ 2.899765] mousedev: PS/2 mouse device common for all mice
  358. <6>[ 2.900361] input: gpio-keys as /devices/platform/gpio-keys/input/input1
  359. <6>[ 2.900857] usbcore: registered new interface driver xpad
  360. <6>[ 2.901086] usbcore: registered new interface driver usb_acecad
  361. <6>[ 2.901209] acecad: v3.2:USB Acecad Flair tablet driver
  362. <6>[ 2.901431] usbcore: registered new interface driver aiptek
  363. <6>[ 2.901552] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
  364. <6>[ 2.901754] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
  365. <6>[ 2.901928] usbcore: registered new interface driver gtco
  366. <4>[ 2.902112] GTCO usb driver version: 2.00.0006
  367. <6>[ 2.902261] usbcore: registered new interface driver hanwang
  368. <6>[ 2.902559] usbcore: registered new interface driver kbtab
  369. <6>[ 2.902678] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
  370. <6>[ 2.902903] usbcore: registered new interface driver wacom
  371. <6>[ 2.903023] wacom: v1.52:USB Wacom tablet driver
  372. <6>[ 2.903408] input: AT42QT602240 Touchscreen as /devices/platform/s3c2440-i2c.2/i2c-2/2-004a/input/input2
  373. <7>[ 2.905238] [TSP] F/W version : 22
  374. <7>[ 2.905411] [TSP] Family ID : 128
  375. <7>[ 2.905517] [TSP] Variant ID : 1
  376. <7>[ 2.905621] [TSP] Build number : 171
  377. <7>[ 2.905791] [TSP] X size : 18
  378. <7>[ 2.905896] [TSP] Y size : 12
  379. <7>[ 3.185740] [TSP] Family ID: 128 Variant ID: 1 Version: 22 Build: 171
  380. <7>[ 3.185943] [TSP] Matrix X Size: 18 Matrix Y Size: 12 Object Num: 17
  381. <7>[ 3.186133] [TSP] Calibrating...
  382. <7>[ 3.186838] [TSP] release_all_fingers
  383. <7>[ 3.186969] [TSP] QT602240_Multitouch_Threshold_High
  384. <4>[ 3.188070] [Compass] ak8973_probe
  385. <6>[ 3.189168] input: lightsensor-level as /devices/virtual/input/input3
  386. <4>[ 3.189489] [bh1721_i2c_probe]: Light Sensor probe complete.bma020_acc_init
  387. <7>[ 3.189857] [TSP] msg:0x90
  388. <7>[ 3.189956] [TSP] release_all_fingers
  389. <4>[ 3.190412] bma020_accelerometer_probe
  390. <4>[ 3.190527] bma020_acc_start
  391. <4>[ 3.190767] i2c_acc_bma020_init called
  392. <7>[ 3.190957] [TSP] msg:0x0
  393. <4>[ 3.191091] bma020_probe called
  394. <4>[ 3.191232] bma020_chip_init
  395. <4>[ 3.191849] chip_id=2
  396. <4>[ 3.192896] bma020_chip_init bma020_chip_init ok~!!
  397. <4>[ 3.194553] l3g4200d_init
  398. <6>[ 3.194653] L3G4200D init driver
  399. <6>[ 3.194776] l3g4200d_probe : platform data ok!!
  400. <6>[ 3.194956] l3g4200d_probe : i2c_check_functionality I2C_FUNC_I2C!!
  401. <6>[ 3.195082] l3g4200d_probe : i2c_check_functionality I2C_FUNC_SMBUS_I2C_BLOCK!!
  402. <6>[ 3.195282] l3g4200d_probe : kzalloc!!
  403. <6>[ 3.195387] l3g4200d_probe : i2c_set_clientdata!!
  404. <6>[ 3.195566] l3g4200d_probe : kmalloc!!
  405. <6>[ 3.195672] l3g4200d_probe : memcpy!!
  406. <6>[ 3.195777] l3g4200d_validate_pdata : check map!!
  407. <6>[ 3.195955] l3g4200d_validate_pdata : check negate!!
  408. <6>[ 3.196070] l3g4200d_probe : validate_pdata!!
  409. <6>[ 3.196247] l3g4200d_probe : slave addr = 69
  410. <6>[ 3.196486] l3g4200d_probe : L3G4200D Device detected!
  411. <6>[ 3.196975] l3g4200d_probe : I2C driver registered!
  412. <6>[ 3.197295] input: gyro as /devices/virtual/input/input4
  413. <6>[ 3.197626] l3g4200d_probe : L3G4200D device created successfully
  414. <6>[ 3.197818] l3g4200d_probe : L3G4200D device created successfully
  415. <6>[ 3.198262] max8998-rtc max8998-rtc: RTC CHIP NAME: max8998-rtc
  416. <4>[ 3.198478] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
  417. <6>[ 3.199361] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
  418. <6>[ 3.199572] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
  419. <6>[ 3.199699] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
  420. <6>[ 3.199891] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
  421. <6>[ 3.200211] using rtc device, s3c, for alarms
  422. <6>[ 3.200409] s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
  423. <6>[ 3.200660] i2c /dev entries driver
  424. <6>[ 3.201910] lirc_dev: IR Remote Control driver registered, major 249
  425. <6>[ 3.202043] IR NEC protocol handler initialized
  426. <6>[ 3.202221] IR RC5(x) protocol handler initialized
  427. <6>[ 3.202333] IR RC6 protocol handler initialized
  428. <6>[ 3.202445] IR JVC protocol handler initialized
  429. <6>[ 3.202622] IR Sony protocol handler initialized
  430. <6>[ 3.202735] IR RC5 (streamzap) protocol handler initialized
  431. <6>[ 3.202920] IR LIRC bridge handler initialized
  432. <6>[ 3.203029] Linux video capture interface: v2.00
  433. <6>[ 3.203352] mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
  434. <6>[ 3.203358]
  435. <6>[ 3.203908] S3C JPEG Driver, (c) 2007 Samsung Electronics
  436. <6>[ 3.204095] JPEG driver for S5PV210
  437. <6>[ 3.204468] i2c i2c-1: attached s5p_ddc into i2c adapter successfully
  438. <4>[ 3.204692] S5P HPD Driver, (c) 2010 Samsung Electronics
  439. <4>[ 3.206218] S5P CEC Driver, (c) 2010 Samsung Electronics
  440. <6>[ 3.206716] s5p_handle_cable....startmax17042 attach success!!!
  441. <7>[ 3.218291] [TSP] msg:0x10
  442. <7>[ 3.218392] [TSP] release_all_fingers
  443. <7>[ 3.233131] [TSP] msg:0x0
  444. <6>[ 3.310418] wake enabled for irq 46
  445. <4>[ 3.313357] [FG_Model] 0xb110, 0xb610, 0xb7a0, 0xb980, 0xbb50, 0xbbb0, 0xbcd0, 0xbd20, 0xbd70, 0xbe10, 0xbed0, 0xc0e0, 0xc320, 0xc6d0, 0xcae0, 0xcf30, 0x02f0, 0x0830, 0x0cb0, 0x0a70, 0x1ef0, 0x0900, 0x33c0, 0x4980, 0x1a00, 0x0e30, 0x0a70, 0x0900, 0x0a70, 0x0740, 0x0770, 0x0770, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100
  446. <6>[ 3.333026] smb136_i2c_probe : SMB136 Charger Driver Loading
  447. <4>[ 3.333215] Smb136 charger attach success!!!
  448. <4>[ 3.333835] smb136_get_charging_status : 0x36h(0x00), 0x39h(0x00)
  449. <6>[ 3.334101] wake enabled for irq 41
  450. <6>[ 3.340392] max8998_charger_probe : MAX8998 Charger Driver Loading
  451. <6>[ 3.342929] device-mapper: uevent: version 1.0.3
  452. <6>[ 3.343310] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
  453. <6>[ 3.343622] Bluetooth: HCI UART driver ver 2.2
  454. <6>[ 3.343736] Bluetooth: HCI H4 protocol initialized
  455. <6>[ 3.344140] cpuidle: using governor ladder
  456. <6>[ 3.344314] cpuidle: using governor menu
  457. <6>[ 3.344457] sdhci: Secure Digital Host Controller Interface driver
  458. <6>[ 3.344648] sdhci: Copyright(c) Pierre Ossman
  459. <6>[ 3.344862] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
  460. <6>[ 3.345071] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (51307692 Hz)
  461. <6>[ 3.345404] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
  462. <6>[ 3.345645] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
  463. <6>[ 3.345889] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
  464. <6>[ 3.346157] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
  465. <6>[ 3.346542] s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)
  466. <6>[ 3.346687] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
  467. <6>[ 3.347026] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
  468. <6>[ 3.349388] usbcore: registered new interface driver usbhid
  469. <6>[ 3.349512] usbhid: USB HID core driver
  470. <6>[ 3.349968] logger: created 256K log 'log_main'
  471. <6>[ 3.350212] logger: created 256K log 'log_events'
  472. <6>[ 3.350389] logger: created 256K log 'log_radio'
  473. <6>[ 3.350631] logger: created 256K log 'log_system'
  474. <6>[ 3.350854] zram: num_devices not specified. Using default: 1
  475. <6>[ 3.351042] zram: Creating 1 devices ...
  476. <4>[ 3.381459] smdkc110_audio_init
  477. <6>[ 3.381765] WM8994 Audio Codec 0.1
  478. <4>[ 3.436613] wm8994_extensions: initializing driver v10
  479. <6>[ 3.443822] s3c_idma_preallocate_buffer: VA-f00c0000 PA-C0000000 163840bytes
  480. <6>[ 3.444310] asoc: WM8994 PAIFRX <-> samsung-i2s.0 mapping ok
  481. <6>[ 3.444753] ALSA device list:
  482. <6>[ 3.444855] #0: smdkc110
  483. <6>[ 3.445201] oprofile: using arm/armv7
  484. <6>[ 3.445578] GACT probability NOT on
  485. <6>[ 3.445690] Mirror/redirect action on
  486. <6>[ 3.445860] u32 classifier
  487. <6>[ 3.445957] Actions configured
  488. <6>[ 3.446063] Netfilter messages via NETLINK v0.30.
  489. <6>[ 3.446306] nf_conntrack version 0.5.0 (7880 buckets, 31520 max)
  490. <6>[ 3.447225] ctnetlink v0.93: registering with nfnetlink.
  491. <6>[ 3.447493] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  492. <6>[ 3.447626] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  493. <6>[ 3.448139] xt_time: kernel timezone is -0000
  494. <6>[ 3.449791] ip_tables: (C) 2000-2006 Netfilter Core Team
  495. <6>[ 3.450155] arp_tables: (C) 2002 David S. Miller
  496. <6>[ 3.450321] TCP cubic registered
  497. <6>[ 3.450427] Initializing XFRM netlink socket
  498. <6>[ 3.451451] NET: Registered protocol family 10
  499. <6>[ 3.456590] Mobile IPv6
  500. <6>[ 3.456719] ip6_tables: (C) 2000-2006 Netfilter Core Team
  501. <6>[ 3.457135] IPv6 over IPv4 tunneling driver
  502. <6>[ 3.461709] NET: Registered protocol family 17
  503. <6>[ 3.461847] NET: Registered protocol family 15
  504. <6>[ 3.462142] Bluetooth: RFCOMM TTY layer initialized
  505. <6>[ 3.462268] Bluetooth: RFCOMM socket layer initialized
  506. <6>[ 3.462452] Bluetooth: RFCOMM ver 1.11
  507. <6>[ 3.462560] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  508. <6>[ 3.462681] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  509. <6>[ 3.462991] NET: Registered protocol family 35
  510. <5>[ 3.463240] Registering the dns_resolver key type
  511. <6>[ 3.463450] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
  512. <6>[ 3.463668] ThumbEE CPU extension supported.
  513. <6>[ 3.464150] s5pv210_cpufreq_init: S5PV210 cpu-freq driver
  514. <6>[ 3.464832] regulator_init_complete: USB_VBUS_AP: disabling
  515. <6>[ 3.465718] regulator_init_complete: VDD_INT: disabling
  516. <6>[ 3.466530] regulator_init_complete: VDD_ARM: disabling
  517. <6>[ 3.469577] [30pin] acc_con_init
  518. <6>[ 3.469732] [30pin] acc_con_probe
  519. <4>[ 3.469872] [ MHL_DRIVER (SII9234A_i2c_probe,239) ]
  520. <4>[ 3.470054] SII9234A attach success!!!
  521. <4>[ 3.470240] [ MHL_DRIVER (SII9234B_i2c_probe,272) ]
  522. <4>[ 3.470422] SII9234B attach success!!!
  523. <4>[ 3.470584] [ MHL_DRIVER (SII9234C_i2c_probe,306) ]
  524. <4>[ 3.470698] SII9234C attach success!!!
  525. <4>[ 3.472494] [ MHL_DRIVER (SII9234_i2c_probe,192) ]
  526. <4>[ 3.472597] SII9234 attach success!!!
  527. <4>[ 3.472719] [ MHL_DRIVER (SII9234_GPIO_INIT,134) ]
  528. <4>[ 3.472878] [ MHL_DRIVER (SII9234_HW_Off,124) ]
  529. <6>[ 3.576661] mmc0: new high speed MMC card at address 0001
  530. <6>[ 3.577549] mmcblk0: mmc0:0001 SEM02G 1.82 GiB
  531. <6>[ 3.577967] mmcblk0boot0: mmc0:0001 SEM02G partition 1 1.00 MiB
  532. <6>[ 3.578500] mmcblk0boot1: mmc0:0001 SEM02G partition 2 1.00 MiB
  533. <6>[ 3.580827] mmcblk0: p1 p2 p3
  534. <6>[ 3.584116] mmcblk0boot1: unknown partition table
  535. <6>[ 3.586654] mmcblk0boot0: unknown partition table
  536. <7>[ 3.586949] s3c-sdhci.2: ldo on
  537. <6>[ 4.049158] [30pin] adc change notified: acc_adc = 4083
  538. <4>[ 4.049851] [30pin] adc range filter not found.
  539. <6>[ 4.169393] mmc1: new high speed SDHC card at address 0001
  540. <6>[ 4.172530] mmcblk1: mmc1:0001 00000 14.7 GiB
  541. <6>[ 4.180268] mmcblk1: p1
  542. <6>[ 4.256118] [30pin] acc_con_interrupt_init
  543. <6>[ 4.256673] [30pin] acc_id_interrupt_init
  544. <6>[ 4.257077] wake enabled for irq 37
  545. <6>[ 4.257259] wake enabled for irq 173
  546. <4>[ 4.257747] ## wifi_probe
  547. <4>[ 4.257922] wifi_set_power = 1
  548. <6>[ 4.258140] [30pin] acc_id_interrupt
  549. <6>[ 4.258462] [30pin] accessorry_id irq handler: dock_irq gpio val = 1
  550. <6>[ 4.258667] [30pin] Accessory detached
  551. <6>[ 4.258846] [30pin] adc change notified: acc_adc = 0
  552. <6>[ 4.259304] [30pin] acc_notified: ACCESSORY=unknown - STATE=offline
  553. <4>[ 4.463297] wifi_set_carddetect = 1
  554. <4>[ 4.726716] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
  555. <6>[ 4.726864] mmc2: new SDIO card at address 0001
  556. <4>[ 4.968957] alloc static buf at ef900000!
  557. <4>[ 4.971870] F1 signature read @0x18000000=0x9934329
  558. <4>[ 4.980040] DHD: dongle ram size is set to 294912(orig 294912)
  559. <4>[ 4.980871] wl_create_event_handler thr:58 started
  560. <4>[ 4.981187] dhd_attach thr:59 started
  561. <4>[ 4.981421] dhd_attach thr:5a started
  562. <4>[ 4.981573] dhd_attach thr:5b started
  563. <4>[ 4.984448] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
  564. <4>[ 4.984764]
  565. <4>[ 4.984768] Dongle Host Driver, version 5.90.195.114
  566. <4>[ 4.984772] Compiled in drivers/net/wireless/bcmdhd on Aug 5 2013 at 07:03:21
  567. <4>[ 4.985169] wifi_set_power = 0
  568. <4>[ 4.985341] =========== WLAN placed in RESET ========
  569. <6>[ 4.985708] input: p1_keyboard as /devices/platform/p1_keyboard/input/input5
  570. <6>[ 4.986156] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
  571. <6>[ 4.986301] s3c-rtc s3c2410-rtc: setting system clock to 2013-08-20 01:05:44 UTC (1376960744)
  572. <6>[ 4.987949] FIMC0 registered successfully
  573. <6>[ 4.989269] FIMC1 registered successfully
  574. <6>[ 4.991465] FIMC2 registered successfully
  575. <6>[ 4.991603] S5P TVOUT Driver, (c) 2010 Samsung Electronics
  576. <4>[ 4.992688] clk_get: could not find clock mout_vpll_src for dev s5p_device_tvout+0x8/0xd8 (s5p-tvout)
  577. <3>[ 4.992876] failed to find clock "mout_vpll_src"
  578. <6>[ 4.993097] s5p-tvout s5p-tvout: hpd status: cable removed/not connected
  579. <6>[ 4.998922] s5p_tv_probe TV Probing is done
  580. <6>[ 4.999137] sec_battery_probe : Samsung Battery Driver Loading
  581. <4>[ 5.006182] Warning: unable to open an initial console.
  582. <6>[ 5.007043] Freeing init memory: 5544K
  583. <7>[ 5.024286] onenand_wait: correctable ECC error = 0x5555
  584. <7>[ 5.209991] onenand_wait: correctable ECC error = 0x5555
  585. <6>[ 5.282145] yaffs: dev is 32505858 name is "mtdblock2" rw
  586. <6>[ 5.282265] yaffs: passed flags ""
  587. <7>[ 5.282410] yaffs: Attempting MTD mount of 31.2,"mtdblock2"
  588. <7>[ 5.680761] yaffs: yaffs_read_super: is_checkpointed 1
  589. <7>[ 5.718823] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 17
  590. <6>[ 5.719186] EXT4-fs (mmcblk0p1): 1 orphan inode deleted
  591. <6>[ 5.719375] EXT4-fs (mmcblk0p1): recovery complete
  592. <6>[ 5.966151] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  593. <3>[ 6.025760] init: could not import file '/init.carrier.rc' from '/init.rc'
  594. <4>[ 6.026054] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  595. <3>[ 6.107492] init: cannot open '/initlogo.rle'
  596. <6>[ 6.127866] init: command 'loglevel' r=0
  597. <6>[ 6.128032] init: command 'stop' r=0
  598. <6>[ 6.128160] init: processing action 0x2ccb0 (fs)
  599. <6>[ 6.128422] init: mtd partition 0, boot
  600. <6>[ 6.128540] init: mtd partition 1, recovery
  601. <6>[ 6.128659] init: mtd partition 2, system
  602. <6>[ 6.128841] init: mtd partition 3, reservoir
  603. <6>[ 6.129036] yaffs: dev is 32505858 name is "mtdblock2" rw
  604. <6>[ 6.129221] yaffs: passed flags ""
  605. <7>[ 6.129329] yaffs: Attempting MTD mount of 31.2,"mtdblock2"
  606. <7>[ 6.530994] yaffs: yaffs_read_super: is_checkpointed 1
  607. <6>[ 6.531206] init: command 'mount' r=0
  608. <6>[ 6.531399] init: command 'mount' r=0
  609. <6>[ 6.531502] init: command 'mount' r=-1
  610. <6>[ 6.531655] init: command 'mount' r=-1
  611. <6>[ 6.531754] init: processing action 0x31d90 (fs)
  612. <6>[ 6.551196] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: errors=panic
  613. <7>[ 7.709813] EXT4-fs (mmcblk0p2): ext4_orphan_cleanup: deleting unreferenced inode 56483
  614. <6>[ 7.712516] EXT4-fs (mmcblk0p2): 1 orphan inode deleted
  615. <6>[ 7.717221] EXT4-fs (mmcblk0p2): recovery complete
  616. <6>[ 7.972396] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: errors=panic
  617. <6>[ 7.972952] init: command 'mount_all' r=0
  618. <6>[ 7.973090] init: processing action 0x32fd0 (fs)
  619. <6>[ 7.973304] init: command 'mount' r=0
  620. <6>[ 7.973527] init: command 'chown' r=0
  621. <6>[ 7.973660] init: command 'chmod' r=0
  622. <6>[ 7.973907] init: command 'chmod' r=0
  623. <6>[ 7.974185] init: command 'chmod' r=0
  624. <6>[ 7.974378] init: command 'chown' r=0
  625. <6>[ 7.974565] init: command 'chown' r=0
  626. <6>[ 7.975903] init: command 'chown' r=0
  627. <6>[ 7.976264] init: command 'chown' r=0
  628. <6>[ 7.976659] init: command 'chown' r=0
  629. <6>[ 7.977215] init: command 'chown' r=0
  630. <6>[ 7.977591] init: command 'chmod' r=0
  631. <6>[ 7.977945] init: command 'chown' r=0
  632. <6>[ 7.978400] init: command 'chown' r=0
  633. <6>[ 7.978818] init: command 'chown' r=0
  634. <6>[ 7.979035] init: processing action 0x2cd98 (post-fs)
  635. <6>[ 7.979393] init: command 'mount' r=0
  636. <6>[ 7.979658] init: command 'mount' r=0
  637. <6>[ 7.979880] init: command 'mount' r=0
  638. <6>[ 7.980280] init: command 'chown' r=0
  639. <6>[ 7.980519] init: command 'chmod' r=0
  640. <6>[ 7.980717] init: command 'restorecon' r=0
  641. <6>[ 7.987632] init: command 'chown' r=0
  642. <6>[ 7.987780] init: command 'chmod' r=0
  643. <6>[ 7.987896] init: command 'restorecon' r=0
  644. <6>[ 7.988134] init: command 'chown' r=0
  645. <6>[ 7.988286] init: command 'chmod' r=0
  646. <6>[ 7.988447] init: command 'chown' r=0
  647. <6>[ 7.988663] init: command 'chmod' r=0
  648. <6>[ 7.988813] init: command 'chown' r=0
  649. <6>[ 7.988962] init: command 'chmod' r=0
  650. <6>[ 7.989161] init: command 'chown' r=-2
  651. <6>[ 7.989287] init: command 'chmod' r=-2
  652. <6>[ 7.989413] init: command 'chown' r=-2
  653. <6>[ 7.989601] init: command 'chmod' r=-2
  654. <6>[ 7.989789] init: command 'mkdir' r=0
  655. <6>[ 7.989914] init: processing action 0x33258 (post-fs)
  656. <3>[ 8.010730] vibrator: version magic '3.0.87 preempt mod_unload ARMv7 ' should be '3.0.88 preempt mod_unload ARMv7 '
  657. <6>[ 8.010984] init: command 'insmod' r=-1
  658. <6>[ 8.015849] init: command 'insmod' r=-1
  659. <6>[ 8.015975] init: processing action 0x2d0f8 (post-fs-data)
  660. <6>[ 8.016213] init: command 'chown' r=0
  661. <6>[ 8.016350] init: command 'chmod' r=0
  662. <6>[ 8.016464] init: command 'restorecon' r=0
  663. <6>[ 8.022590] init: command 'mkdir' r=0
  664. <6>[ 8.022730] init: command 'copy' r=-1
  665. <6>[ 8.023316] init: command 'chown' r=-2
  666. <6>[ 8.023508] init: command 'chmod' r=-2
  667. <6>[ 8.023634] init: command 'copy' r=-1
  668. <6>[ 8.023763] init: command 'chown' r=-2
  669. <6>[ 8.023949] init: command 'chmod' r=-2
  670. <6>[ 8.024082] init: command 'write' r=-2
  671. <6>[ 8.024273] init: command 'mkdir' r=0
  672. <6>[ 8.025083] init: command 'mkdir' r=0
  673. <6>[ 8.025267] init: command 'mkdir' r=0
  674. <6>[ 8.025445] init: command 'mkdir' r=0
  675. <6>[ 8.025719] init: command 'mkdir' r=0
  676. <6>[ 8.025915] init: command 'mkdir' r=0
  677. <6>[ 8.026092] init: command 'mkdir' r=0
  678. <6>[ 8.026336] init: command 'mkdir' r=0
  679. <6>[ 8.026513] init: command 'mkdir' r=0
  680. <6>[ 8.026689] init: command 'mkdir' r=0
  681. <6>[ 8.027537] init: command 'chmod' r=0
  682. <6>[ 8.033012] init: command 'mkdir' r=0
  683. <6>[ 8.033722] init: command 'mkdir' r=0
  684. <6>[ 8.039481] init: command 'mkdir' r=0
  685. <6>[ 8.044623] init: command 'mkdir' r=0
  686. <6>[ 8.044809] init: command 'mkdir' r=0
  687. <6>[ 8.045000] init: command 'mkdir' r=0
  688. <6>[ 8.052449] init: command 'mkdir' r=0
  689. <6>[ 8.052771] init: command 'mkdir' r=0
  690. <6>[ 8.053156] init: command 'mkdir' r=0
  691. <6>[ 8.054193] init: command 'mkdir' r=0
  692. <6>[ 8.054517] init: command 'mkdir' r=0
  693. <6>[ 8.054838] init: command 'mkdir' r=0
  694. <6>[ 8.055201] init: command 'chown' r=0
  695. <6>[ 8.055442] init: command 'chmod' r=0
  696. <6>[ 8.055762] init: command 'mkdir' r=0
  697. <6>[ 8.056124] init: command 'chown' r=0
  698. <6>[ 8.056364] init: command 'chmod' r=0
  699. <6>[ 8.056674] init: command 'mkdir' r=0
  700. <6>[ 8.057167] init: command 'mkdir' r=0
  701. <6>[ 8.057368] init: processing action 0x30df8 (post-fs-data)
  702. <6>[ 8.057904] init: command 'chown' r=0
  703. <6>[ 8.058441] init: command 'chmod' r=0
  704. <6>[ 8.058790] init: command 'chown' r=0
  705. <6>[ 8.059118] init: command 'chmod' r=0
  706. <6>[ 8.059441] init: processing action 0x332c8 (post-fs-data)
  707. <6>[ 8.059783] init: command 'mkdir' r=0
  708. <6>[ 8.060031] init: command 'chown' r=0
  709. <6>[ 8.060499] init: command 'mkdir' r=0
  710. <6>[ 8.061713] init: command 'mkdir' r=0
  711. <6>[ 8.062667] init: command 'write' r=0
  712. <4>[ 8.062930] [Light Sensor] new_value = 1, old state = 0
  713. <4>[ 8.063051] [Light Sensor] starting poll timer, delay 200000000ns
  714. <4>[ 8.063381] [Light Sensor] Power ON
  715. <6>[ 8.063502] init: command 'write' r=0
  716. <4>[ 8.366070] l3g_set_enable: Gyro_sensor Turn on
  717. <4>[ 8.366228] l3g_set_enable: Timer on
  718. <6>[ 8.366336] init: command 'write' r=0
  719. <5>[ 8.368352] init: starting 'set-macaddr'
  720. <6>[ 8.368761] init: command 'start' r=0
  721. <6>[ 8.368882] init: command 'setprop' r=0
  722. <6>[ 8.369003] init: processing action 0x353d8 (property_service_init)
  723. <6>[ 8.380811] init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
  724. <6>[ 8.381053] init: command 'property_service_init' r=0
  725. <6>[ 8.381170] init: processing action 0x35420 (signal_init)
  726. <6>[ 8.381392] init: command 'signal_init' r=0
  727. <6>[ 8.381522] init: processing action 0x35468 (check_startup)
  728. <6>[ 8.381715] init: command 'check_startup' r=0
  729. <6>[ 8.381835] init: processing action 0x2d880 (boot)
  730. <6>[ 8.381967] init: command 'chown' r=-2
  731. <6>[ 8.382134] init: command 'chmod' r=-2
  732. <6>[ 8.382246] init: command 'chown' r=-2
  733. <6>[ 8.382356] init: command 'chmod' r=-2
  734. <6>[ 8.382521] init: command 'chown' r=-2
  735. <6>[ 8.382630] init: command 'chmod' r=-2
  736. <6>[ 8.382741] init: command 'chown' r=-2
  737. <6>[ 8.382904] init: command 'chmod' r=-2
  738. <6>[ 8.383014] init: command 'chown' r=-2
  739. <6>[ 8.383124] init: command 'chmod' r=-2
  740. <6>[ 8.383287] init: command 'chown' r=-2
  741. <6>[ 8.383397] init: command 'chmod' r=-2
  742. <6>[ 8.383507] init: command 'chown' r=-2
  743. <6>[ 8.383670] init: command 'chown' r=-2
  744. <6>[ 8.383779] init: command 'chmod' r=-2
  745. <6>[ 8.383889] init: command 'chown' r=-2
  746. <6>[ 8.384051] init: command 'chmod' r=-2
  747. <6>[ 8.384183] init: command 'chown' r=0
  748. <6>[ 8.384309] init: command 'chmod' r=0
  749. <6>[ 8.384490] init: command 'chown' r=0
  750. <6>[ 8.384613] init: command 'chmod' r=0
  751. <6>[ 8.384727] init: command 'chown' r=-2
  752. <6>[ 8.384936] init: command 'chmod' r=0
  753. <6>[ 8.385063] init: command 'chown' r=0
  754. <6>[ 8.385187] init: command 'chmod' r=0
  755. <6>[ 8.385355] init: command 'chown' r=-2
  756. <6>[ 8.385468] init: command 'chmod' r=-2
  757. <6>[ 8.385593] init: command 'chown' r=0
  758. <6>[ 8.385718] init: command 'chmod' r=0
  759. <6>[ 8.385843] init: command 'chown' r=0
  760. <6>[ 8.385968] init: command 'chmod' r=0
  761. <6>[ 8.386093] init: command 'chown' r=0
  762. <6>[ 8.386271] init: command 'chmod' r=0
  763. <6>[ 8.386395] init: command 'chown' r=0
  764. <6>[ 8.386520] init: command 'chmod' r=0
  765. <6>[ 8.386701] init: command 'chown' r=0
  766. <6>[ 8.386826] init: command 'chmod' r=0
  767. <6>[ 8.386961] init: command 'chown' r=0
  768. <6>[ 8.387140] init: command 'chmod' r=0
  769. <6>[ 8.387270] init: command 'chown' r=0
  770. <6>[ 8.387395] init: command 'chmod' r=0
  771. <6>[ 8.388030] init: command 'ifup' r=0
  772. <6>[ 8.388204] init: command 'hostname' r=0
  773. <6>[ 8.388337] init: command 'domainname' r=0
  774. <6>[ 8.388504] init: command 'setrlimit' r=0
  775. <6>[ 8.388639] init: command 'write' r=0
  776. <6>[ 8.388782] init: command 'write' r=0
  777. <6>[ 8.391559] init: command 'chown' r=0
  778. <6>[ 8.392578] init: command 'chmod' r=0
  779. <6>[ 8.393199] init: command 'chown' r=0
  780. <6>[ 8.393379] init: command 'chmod' r=0
  781. <6>[ 8.393511] init: command 'write' r=0
  782. <6>[ 8.393637] init: command 'write' r=0
  783. <6>[ 8.393804] init: command 'chown' r=-2
  784. <6>[ 8.393913] init: command 'chown' r=-2
  785. <6>[ 8.394018] init: command 'chown' r=-2
  786. <6>[ 8.394179] init: command 'chown' r=-2
  787. <6>[ 8.394286] init: command 'chown' r=-2
  788. <6>[ 8.394403] init: command 'chown' r=-2
  789. <6>[ 8.394579] init: command 'chown' r=0
  790. <6>[ 8.394703] init: command 'chown' r=0
  791. <6>[ 8.394825] init: command 'chown' r=0
  792. <6>[ 8.395002] init: command 'chown' r=0
  793. <6>[ 8.395119] init: command 'chmod' r=0
  794. <6>[ 8.395235] init: command 'chmod' r=0
  795. <6>[ 8.395349] init: command 'chmod' r=0
  796. <6>[ 8.395522] init: command 'chown' r=-2
  797. <6>[ 8.395634] init: command 'chown' r=-2
  798. <6>[ 8.395745] init: command 'chown' r=-2
  799. <6>[ 8.395972] init: command 'chown' r=0
  800. <6>[ 8.396086] init: command 'chown' r=-2
  801. <6>[ 8.396197] init: command 'chown' r=-2
  802. <6>[ 8.396360] init: command 'chown' r=-2
  803. <6>[ 8.396469] init: command 'chown' r=-2
  804. <6>[ 8.396587] init: command 'chown' r=-2
  805. <6>[ 8.397672] init: command 'chown' r=-2
  806. <6>[ 8.398671] init: command 'chown' r=-2
  807. <6>[ 8.399229] init: command 'chown' r=-2
  808. <6>[ 8.400305] init: command 'chown' r=-2
  809. <6>[ 8.401332] init: command 'chown' r=-2
  810. <6>[ 8.401887] init: command 'chown' r=-2
  811. <6>[ 8.402064] init: command 'chown' r=-2
  812. <6>[ 8.402175] init: command 'chown' r=-2
  813. <6>[ 8.402283] init: command 'chown' r=-2
  814. <6>[ 8.402455] init: command 'chown' r=-2
  815. <6>[ 8.402602] init: command 'chown' r=0
  816. <6>[ 8.402729] init: command 'chown' r=0
  817. <6>[ 8.402908] init: command 'chown' r=0
  818. <6>[ 8.403032] init: command 'chown' r=0
  819. <6>[ 8.403155] init: command 'chown' r=0
  820. <6>[ 8.403334] init: command 'chown' r=0
  821. <6>[ 8.403475] init: command 'chown' r=0
  822. <6>[ 8.403620] init: command 'setprop' r=0
  823. <6>[ 8.403808] init: command 'setprop' r=0
  824. <6>[ 8.403943] init: command 'setprop' r=0
  825. <6>[ 8.404075] init: command 'setprop' r=0
  826. <6>[ 8.404261] init: command 'setprop' r=0
  827. <6>[ 8.404402] init: command 'setprop' r=0
  828. <6>[ 8.404563] init: command 'setprop' r=0
  829. <6>[ 8.404750] init: command 'setprop' r=0
  830. <6>[ 8.404883] init: command 'setprop' r=0
  831. <6>[ 8.405016] init: command 'setprop' r=0
  832. <6>[ 8.405203] init: command 'setprop' r=0
  833. <6>[ 8.405336] init: command 'setprop' r=0
  834. <6>[ 8.405449] init: command 'setprop' r=0
  835. <5>[ 8.437074] init: starting 'servicemanager'
  836. <5>[ 8.437462] init: starting 'vold'
  837. <5>[ 8.437804] init: starting 'p1-ril-daemon'
  838. <5>[ 8.438171] init: starting 'pvrsrvinit'
  839. <6>[ 8.438466] init: command 'class_start' r=0
  840. <5>[ 8.438624] init: starting 'netd'
  841. <6>[ 8.443055] init: Created socket '/dev/socket/mdns' with mode '660', user '0', group '1000'
  842. <6>[ 8.444332] init: Created socket '/dev/socket/dnsproxyd' with mode '660', user '0', group '3003'
  843. <6>[ 8.444588] init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1000'
  844. <6>[ 8.445512] init: Created socket '/dev/socket/rild-debug' with mode '660', user '1001', group '1000'
  845. <6>[ 8.445768] init: Created socket '/dev/socket/rild' with mode '660', user '0', group '1001'
  846. <6>[ 8.446643] init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1009'
  847. <5>[ 8.474053] init: starting 'debuggerd'
  848. <5>[ 8.485414] init: starting 'surfaceflinger'
  849. <5>[ 8.514881] init: starting 'zygote'
  850. <6>[ 8.524995] init: Created socket '/dev/socket/zygote' with mode '660', user '0', group '1000'
  851. <5>[ 8.574320] init: starting 'drm'
  852. <5>[ 8.574674] init: starting 'media'
  853. <5>[ 8.575041] init: starting 'installd'
  854. <5>[ 8.575361] init: starting 'keystore'
  855. <5>[ 8.576175] init: starting 'gps-daemon'
  856. <5>[ 8.580890] init: starting 'tvout'
  857. <6>[ 8.581209] init: command 'class_start' r=0
  858. <6>[ 8.581328] init: processing action 0x31d10 (boot)
  859. <6>[ 8.581492] init: command 'setprop' r=0
  860. <6>[ 8.581593] init: command 'setprop' r=0
  861. <6>[ 8.581717] init: processing action 0x33470 (boot)
  862. <6>[ 8.581892] init: command 'setprop' r=0
  863. <6>[ 8.582008] init: command 'setprop' r=0
  864. <6>[ 8.582124] init: command 'setprop' r=0
  865. <6>[ 8.582293] init: command 'setprop' r=0
  866. <6>[ 8.582407] init: command 'setprop' r=0
  867. <6>[ 8.582521] init: command 'setprop' r=0
  868. <6>[ 8.582694] init: processing action 0x34c18 (boot)
  869. <6>[ 8.582843] init: command 'chmod' r=0
  870. <6>[ 8.582970] init: command 'chown' r=0
  871. <6>[ 8.583145] init: command 'chown' r=0
  872. <6>[ 8.583268] init: command 'chown' r=0
  873. <6>[ 8.583396] init: command 'chown' r=0
  874. <6>[ 8.583576] init: command 'chown' r=0
  875. <6>[ 8.583702] init: command 'chown' r=0
  876. <6>[ 8.583826] init: command 'chown' r=0
  877. <6>[ 8.584005] init: command 'chown' r=0
  878. <6>[ 8.587168] init: command 'chown' r=0
  879. <6>[ 8.588214] init: command 'chown' r=0
  880. <6>[ 8.588841] init: command 'chmod' r=0
  881. <6>[ 8.588962] init: command 'chmod' r=0
  882. <6>[ 8.589081] init: command 'chmod' r=0
  883. <6>[ 8.589258] init: command 'chmod' r=0
  884. <6>[ 8.589380] init: command 'chmod' r=0
  885. <6>[ 8.589502] init: command 'chmod' r=0
  886. <6>[ 8.589679] init: command 'chmod' r=0
  887. <6>[ 8.589801] init: command 'chmod' r=0
  888. <6>[ 8.589922] init: command 'chmod' r=0
  889. <6>[ 8.590095] init: command 'chmod' r=0
  890. <6>[ 8.590215] init: command 'chown' r=0
  891. <6>[ 8.590332] init: command 'chmod' r=0
  892. <6>[ 8.590485] init: processing action 0x35118 (boot)
  893. <6>[ 8.592798] init: Created socket '/dev/socket/keystore' with mode '666', user '0', group '0'
  894. <6>[ 8.593748] init: Created socket '/dev/socket/installd' with mode '600', user '1000', group '1000'
  895. <5>[ 8.618816] init: starting 'sysinit'
  896. <6>[ 8.619191] init: command 'start' r=0
  897. <6>[ 8.619347] init: processing action 0x354b0 (queue_property_triggers)
  898. <6>[ 8.619625] init: command 'queue_property_triggers' r=0
  899. <6>[ 8.619740] init: processing action 0x2e940 (nonencrypted)
  900. <6>[ 8.619910] init: command 'class_start' r=0
  901. <6>[ 8.620012] init: processing action 0x2ede0 (property:ro.debuggable=1)
  902. <3>[ 8.620184] init: service 'console' requires console
  903. <6>[ 8.620288] init: command 'start' r=0
  904. <6>[ 8.620387] init: processing action 0x317f0 (property:persist.sys.usb.config=*)
  905. <6>[ 8.620633] init: command 'setprop' r=0
  906. <6>[ 8.620774] init: command 'setprop' r=0
  907. <6>[ 8.620930] init: processing action 0x30ec8 (property:sys.usb.config=none)
  908. <6>[ 8.621075] init: command 'stop' r=0
  909. <3>[ 8.621334] android_usb: already disabled
  910. <6>[ 8.621442] init: command 'write' r=0
  911. <6>[ 8.621596] init: command 'write' r=0
  912. <6>[ 8.621782] init: command 'setprop' r=0
  913. <6>[ 8.621883] init: processing action 0x34150 (property:sys.usb.config=none)
  914. <6>[ 8.622080] init: command 'write' r=-2
  915. <6>[ 8.622180] init: processing action 0x34200 (property:sys.usb.config=mass_storage,adb)
  916. <5>[ 8.622372] init: starting 'adbd'
  917. <6>[ 8.622692] init: command 'start' r=0
  918. <6>[ 8.622835] init: command 'setprop' r=0
  919. <6>[ 8.641307] init: Created socket '/dev/socket/adbd' with mode '660', user '1000', group '1000'
  920. <6>[ 8.647141] adb_open
  921. <6>[ 9.117603] init: waitpid returned pid 126, status = 00000000
  922. <5>[ 9.117790] init: process 'set-macaddr', pid 126 exited
  923. <7>[ 9.238132] onenand_wait: correctable ECC error = 0x5555
  924. <6>[ 9.295696] PVR_K:(Warning): SysFinalise: Version string: SGX540 S5PC110 [545, /d/projects/aokp-sgt7/kernel/samsung/aries/drivers/gpu/pvr/s5pc110/sysconfig.c]
  925. <6>[ 9.297190] init: waitpid returned pid 130, status = 00000000
  926. <5>[ 9.297365] init: process 'pvrsrvinit', pid 130 exited
  927. <6>[ 9.778633] init: waitpid returned pid 141, status = 00000000
  928. <5>[ 9.778822] init: process 'sysinit', pid 141 exited
  929. <6>[ 10.231953] warning: `rild' uses 32-bit capabilities (legacy support in use)
  930. <6>[ 10.804699] s3cfb s3cfb: [fb0] dma: 0x4c748000, cpu: 0xf4800000, size: 0x00708000
  931. <5>[ 11.035892] init: starting 'bootanim'
  932. <7>[ 11.266639] onenand_wait: correctable ECC error = 0x5555
  933. <7>[ 15.219754] onenand_wait: correctable ECC error = 0x5555
  934. <7>[ 16.649933] onenand_wait: correctable ECC error = 0x5555
  935. <7>[ 16.893205] onenand_wait: correctable ECC error = 0x5555
  936. <4>[ 22.057262] [Light Sensor] new_value = 1, old state = 1
  937. <6>[ 22.213033] input: compass as /devices/virtual/input/input6
  938. <4>[ 22.216842] bma020_open
  939. <4>[ 22.252558] [Light Sensor] new_value = 0, old state = 1
  940. <4>[ 22.252679] [Light Sensor] cancelling poll timer
  941. <4>[ 22.299389] [Light Sensor] Power OFF
  942. <4>[ 22.299683] l3g_set_enable: Timer off
  943. <7>[ 24.968219] onenand_wait: correctable ECC error = 0x5555
  944. <7>[ 30.644032] onenand_wait: correctable ECC error = 0x5555
  945. <7>[ 32.373646] onenand_wait: correctable ECC error = 0x5555
  946. <6>[ 42.645497] request_suspend_state: wakeup (3->0) at 42549729239 (2013-08-20 01:06:22.158745245 UTC)
  947. <6>[ 43.390680] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
  948. <5>[ 43.439974] init: starting 'wpa_supplicant'
  949. <6>[ 43.443701] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010'
  950. <6>[ 43.476862] EXT4-fs (dm-0): re-mounted. Opts: (null)
  951. <6>[ 43.506532] EXT4-fs (dm-0): re-mounted. Opts: (null)
  952. <6>[ 43.660930] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
  953. <6>[ 43.712289] EXT4-fs (dm-1): re-mounted. Opts: (null)
  954. <6>[ 43.741094] EXT4-fs (dm-1): re-mounted. Opts: (null)
  955. <6>[ 43.905869] EXT4-fs (dm-2): mounted filesystem without journal. Opts: (null)
  956. <6>[ 43.938005] EXT4-fs (dm-2): re-mounted. Opts: (null)
  957. <6>[ 43.967276] EXT4-fs (dm-2): re-mounted. Opts: (null)
  958. <6>[ 44.147846] EXT4-fs (dm-3): mounted filesystem without journal. Opts: (null)
  959. <4>[ 44.254644]
  960. <4>[ 44.254653] Dongle Host Driver, version 5.90.195.114
  961. <4>[ 44.254657] Compiled in drivers/net/wireless/bcmdhd on Aug 5 2013 at 07:03:21
  962. <4>[ 44.255007] wl_android_wifi_on in
  963. <4>[ 44.255097] wifi_set_power = 1
  964. <6>[ 44.347420] EXT4-fs (dm-3): re-mounted. Opts: (null)
  965. <6>[ 44.354953] EXT4-fs (dm-3): re-mounted. Opts: (null)
  966. <4>[ 44.459078] =========== WLAN going back to live ========
  967. <4>[ 44.459297] sdio_reset_comm():
  968. <4>[ 44.556293] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  969. <6>[ 44.640101] wake enabled for irq 164
  970. <4>[ 44.642101] Firmware up: op_mode=1, Broadcom Dongle Host Driver mac=00:90:4c:c5:34:23
  971. <4>[ 44.646455] Firmware version = wl0: May 25 2012 17:57:45 version 4.218.248.44
  972. <3>[ 44.647242] CFGP2P-ERROR) wl_cfgp2p_supported : wl p2p error -23
  973. <3>[ 44.763749] CFG80211-ERROR) wl_construct_reginfo : get chanspecs failed with -23
  974. <3>[ 44.764045] CFG80211-ERROR) wl_update_wiphybands : wl_construct_reginfo() fails err=-23
  975. <3>[ 45.008532] CFG80211-ERROR) wl_construct_reginfo : get chanspecs failed with -23
  976. <3>[ 45.008799] CFG80211-ERROR) wl_update_wiphybands : wl_construct_reginfo() fails err=-23
  977. <3>[ 45.505726] qtaguid: iface_stat: stat_update() wlan0 not found
  978. <4>[ 45.506145] wl_bss_connect_done succeeded with 00:1f:26:28:b5:80
  979. <3>[ 45.533172] qtaguid: iface_stat: stat_update() wlan0 not found
  980. <4>[ 45.549034] wl_bss_connect_done succeeded with 00:1f:26:28:b5:80
  981. <6>[ 45.663400] acc_open
  982. <6>[ 45.663513] acc_release
  983. <5>[ 45.888179] init: starting 'dhcpcd_wlan0'
  984. <3>[ 46.163724] qtaguid: iface_stat: stat_update() wlan0 not found
  985. <7>[ 46.337588] [TSP] qt602240_inform_first_brightness
  986. <3>[ 46.533025] qtaguid: iface_stat: stat_update() wlan0 not found
  987. <3>[ 47.597357] qtaguid: iface_stat: stat_update() wlan0 not found
  988. <3>[ 47.802181] qtaguid: iface_stat: stat_update() wlan0 not found
  989. <6>[ 50.715751] init: processing action 0x31ff0 (property:gsm.sim.state=NOT_READY)
  990. <6>[ 50.715989] init: command 'setprop' r=0
  991. <6>[ 52.172415] init: processing action 0x31ff0 (property:gsm.sim.state=NOT_READY)
  992. <6>[ 52.172654] init: command 'setprop' r=0
  993. <6>[ 60.764326] init: processing action 0x337f8 (property:sys.boot_completed=1)
  994. <5>[ 60.764554] init: starting 'set-macaddr'
  995. <6>[ 60.764942] init: command 'start' r=0
  996. <6>[ 61.357767] init: waitpid returned pid 870, status = 00000000
  997. <5>[ 61.357957] init: process 'set-macaddr', pid 870 exited
  998. <7>[ 63.459106] wlan0: no IPv6 routers present
  999. <6>[ 83.888365] buttons_enabled_status_write: key function enabled
  1000. <6>[ 83.943131] [TSP] clock value: 1000MHz
  1001. <6>[ 85.651013] binder: release 512:828 transaction 7681 out, still active
  1002. <3>[ 85.651329] binder: release proc 512, transaction 10624, not freed
  1003. <3>[ 85.651498] binder: release proc 512, transaction 10694, not freed
  1004. <6>[ 86.707295] binder: 383:440 transaction failed 29189, size 100-4
  1005. <6>[ 91.065447] init: waitpid returned pid 207, status = 00000000
  1006. <5>[ 91.065581] init: process 'bootanim', pid 207 exited
  1007. <7>[ 93.204792] [TSP] Flags Counted channels: t:3 a:0
  1008. <4>[ 93.580845] smdkc110_hw_params
  1009. <4>[ 93.582585] EPLL Rate changes from 96000000 to 67738000
  1010. <7>[ 95.943210] [TSP] Flags Counted channels: t:4 a:0
  1011. <7>[ 95.943542] [TSP] calibration was good
  1012. <4>[ 96.799627] smdkc110_hw_params
  1013. <6>[ 102.139564] fsa9480 7-0025: prev_dev1: 0x0, prev_dev2: 0x0
  1014. <6>[ 102.139691] fsa9480 7-0025: new_dev1: 0x4, new_dev2: 0x0
  1015. <4>[ 102.139855] sec_switch_set_regulator (mode : 1)
  1016. <4>[ 102.145265] sec_bat_set_cable : cable_type = 1 ( 0 : NONE, 1: USB, 2: TA)
  1017. <4>[ 102.145637] OTG: no changes needed
  1018. <4>[ 102.153138] smb136_charging : enable(1), cable_status(1)
  1019. <6>[ 102.702675] EXT4-fs (dm-4): mounted filesystem without journal. Opts: (null)
  1020. <6>[ 103.403466] EXT4-fs (dm-4): re-mounted. Opts: (null)
  1021. <6>[ 103.417687] EXT4-fs (dm-4): re-mounted. Opts: (null)
  1022. <6>[ 103.796899] EXT4-fs (dm-5): mounted filesystem without journal. Opts: (null)
  1023. <7>[ 104.463952] onenand_wait: correctable ECC error = 0x5555
  1024. <6>[ 105.388680] EXT4-fs (dm-5): re-mounted. Opts: (null)
  1025. <6>[ 105.410186] EXT4-fs (dm-5): re-mounted. Opts: (null)
  1026. <4>[ 107.014442] smdkc110_hw_params
  1027. <6>[ 107.159250] binder: 715:780 transaction failed 29189, size 176-8
  1028. <6>[ 107.159433] binder: send failed reply for transaction 7681, target dead
  1029. <4>[ 114.330810] smdkc110_hw_params
  1030. <7>[ 115.545543] onenand_wait: correctable ECC error = 0x5555
  1031. <4>[ 127.783918] smdkc110_hw_params
  1032. <4>[ 138.694061] smdkc110_hw_params
  1033. <4>[ 155.334646] smdkc110_hw_params
  1034. <4>[ 168.432267] smdkc110_hw_params
  1035. <4>[ 172.846335] smdkc110_hw_params
  1036. <4>[ 182.432255] smdkc110_hw_params
  1037. <4>[ 187.643237] smdkc110_hw_params
  1038. <4>[ 194.885348] smdkc110_hw_params
  1039. <4>[ 198.842393] smdkc110_hw_params
  1040. <4>[ 211.690010] smdkc110_hw_params
  1041. <4>[ 225.088386] smdkc110_hw_params
  1042. <4>[ 237.984663] smdkc110_hw_params
  1043. <4>[ 259.551185] smdkc110_hw_params
  1044. <4>[ 272.168150] smdkc110_hw_params
  1045. <4>[ 279.994624] smdkc110_hw_params
  1046. <4>[ 298.469524] smdkc110_hw_params
  1047. <4>[ 307.619699] smdkc110_hw_params
  1048. <4>[ 329.008113] smdkc110_hw_params
  1049. <4>[ 338.883103] smdkc110_hw_params
  1050. <4>[ 348.248536] smdkc110_hw_params
  1051. <4>[ 360.654743] smdkc110_hw_params
  1052. <4>[ 375.551047] smdkc110_hw_params
  1053. <4>[ 410.761853] smdkc110_hw_params
  1054. <4>[ 421.609514] smdkc110_hw_params
  1055. <4>[ 449.189864] smdkc110_hw_params
  1056. <4>[ 457.482849] smdkc110_hw_params
  1057. <4>[ 477.757927] smdkc110_hw_params
  1058. <4>[ 644.291366] smdkc110_hw_params
  1059. <4>[ 657.000065] smdkc110_hw_params
  1060. <4>[ 662.965007] smdkc110_hw_params
  1061. <4>[ 675.242277] smdkc110_hw_params
  1062. <4>[ 683.574324] smdkc110_hw_params
  1063. <4>[ 698.111710] smdkc110_hw_params
  1064. <4>[ 716.876188] smdkc110_hw_params
  1065. <4>[ 727.529614] smb136_irq_thread
  1066. <4>[ 727.547953] smb136_get_charging_status : 0x36h(0x31), 0x39h(0x00)
  1067. <6>[ 727.552125] fsa9480 7-0025: prev_dev1: 0x4, prev_dev2: 0x0
  1068. <6>[ 727.552987] fsa9480 7-0025: new_dev1: 0x0, new_dev2: 0x0
  1069. <4>[ 727.555407] sec_bat_set_cable : cable_type = 0 ( 0 : NONE, 1: USB, 2: TA)
  1070. <4>[ 727.556299] OTG: no changes needed
  1071. <6>[ 727.557496] android_work: did not send uevent (0 0 (null))
  1072. <6>[ 731.332905] fsa9480 7-0025: prev_dev1: 0x0, prev_dev2: 0x0
  1073. <6>[ 731.334325] fsa9480 7-0025: new_dev1: 0x4, new_dev2: 0x0
  1074. <4>[ 731.335022] sec_switch_set_regulator (mode : 1)
  1075. <4>[ 731.345596] sec_bat_set_cable : cable_type = 1 ( 0 : NONE, 1: USB, 2: TA)
  1076. <4>[ 731.346883] OTG: no changes needed
  1077. <4>[ 731.379149] smb136_charging : enable(1), cable_status(1)
  1078. <4>[ 753.572664] smdkc110_hw_params
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!