Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.8.0-26-generic (buildd@lamiak) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #38-Ubuntu SMP Mon Jun 17 21:46:08 UTC 2013 (Ubuntu 3.8.0-26.38-generic 3.8.13.2)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffcffff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffdefff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x000000007ffdf000-0x000000007fffffff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.3 present.
- [ 0.000000] DMI: ACER Aspire E500 /ERC410M\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff, BIOS R02-A3 06/02/2006
- [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] e820: last_pfn = 0x7ffd0 max_arch_pfn = 0x1000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-DFFFF uncachable
- [ 0.000000] E0000-EFFFF write-through
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F80000000 write-back
- [ 0.000000] 1 disabled
- [ 0.000000] 2 disabled
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
- [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
- [ 0.000000] [mem 0x00000000-0x001fffff] page 4k
- [ 0.000000] [mem 0x00200000-0x379fffff] page 2M
- [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
- [ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
- [ 0.000000] RAMDISK: [mem 0x3616a000-0x370acfff]
- [ 0.000000] ACPI: RSDP 000f8500 00014 (v00 ACPIAM)
- [ 0.000000] ACPI: RSDT 7ffd0000 00038 (v01 A M I OEMRSDT 06000602 MSFT 00000097)
- [ 0.000000] ACPI: FACP 7ffd0200 00081 (v01 A M I OEMFACP 06000602 MSFT 00000097)
- [ 0.000000] ACPI: DSDT 7ffd0400 04D48 (v01 410M1 410M1602 00000602 INTL 02002026)
- [ 0.000000] ACPI: FACS 7ffdf000 00040
- [ 0.000000] ACPI: APIC 7ffd0390 0006C (v01 A M I OEMAPIC 06000602 MSFT 00000097)
- [ 0.000000] ACPI: SSDT 7ffd5150 0007B (v01 OEM_ID OEMTBLID 00000001 INTL 02002026)
- [ 0.000000] ACPI: OEMB 7ffdf040 00040 (v01 A M I AMI_OEM 06000602 MSFT 00000097)
- [ 0.000000] ACPI: MCFG 7ffd51d0 0003C (v01 A M I OEMMCFG 06000602 MSFT 00000097)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 1155MB HIGHMEM available.
- [ 0.000000] 891MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 37bfe000
- [ 0.000000] low ram: 0 - 37bfe000
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
- [ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
- [ 0.000000] HighMem [mem 0x37bfe000-0x7ffcffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
- [ 0.000000] node 0: [mem 0x00100000-0x7ffcffff]
- [ 0.000000] On node 0 totalpages: 524127
- [ 0.000000] free_area_init_node: node 0, pgdat c18f5f40, node_mem_map f516a200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1752 pages used for memmap
- [ 0.000000] Normal zone: 222502 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 2312 pages used for memmap
- [ 0.000000] HighMem zone: 293578 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
- [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
- [ 0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bb9000 s35008 r0 d22336 u57344
- [ 0.000000] pcpu-alloc: s35008 r0 d22336 u57344 alloc=14*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520031
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-26-generic root=UUID=f9747484-1967-4ac6-a764-7fb3f31f9079 ro quiet splash vt.handoff=7
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Initializing CPU#0
- [ 0.000000] allocated 4193792 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (00037bfe:0007ffd0)
- [ 0.000000] Memory: 2048336k/2096960k available (6255k kernel code, 48172k reserved, 2969k data, 788k init, 1183560k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
- [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
- [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
- [ 0.000000] .init : 0xc1903000 - 0xc19c8000 ( 788 kB)
- [ 0.000000] .data : 0xc161bd30 - 0xc1902280 (2969 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc161bd30 (6255 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
- [ 0.000000] CPU 0 irqstacks, hard=f4c08000 soft=f4c0a000
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] tsc: Fast TSC calibration failed
- [ 0.000000] tsc: Unable to calibrate against PIT
- [ 0.000000] tsc: using PMTIMER reference calibration
- [ 0.000000] tsc: Detected 2992.084 MHz processor
- [ 0.016002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.16 BogoMIPS (lpj=11968336)
- [ 0.016009] pid_max: default: 32768 minimum: 301
- [ 0.016055] Security Framework initialized
- [ 0.016072] AppArmor: AppArmor initialized
- [ 0.016075] Yama: becoming mindful.
- [ 0.016150] Mount-cache hash table entries: 512
- [ 0.020086] Initializing cgroup subsys cpuacct
- [ 0.020090] Initializing cgroup subsys memory
- [ 0.020102] Initializing cgroup subsys devices
- [ 0.020105] Initializing cgroup subsys freezer
- [ 0.020109] Initializing cgroup subsys blkio
- [ 0.020112] Initializing cgroup subsys perf_event
- [ 0.020116] Initializing cgroup subsys hugetlb
- [ 0.020165] CPU: Physical Processor ID: 0
- [ 0.020169] CPU: Processor Core ID: 0
- [ 0.020173] mce: CPU supports 4 MCE banks
- [ 0.020188] CPU0: Thermal monitoring enabled (TM1)
- [ 0.020194] process: using mwait in idle threads
- [ 0.020209] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
- [ 0.020209] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
- [ 0.020209] tlb_flushall_shift: 6
- [ 0.020605] Freeing SMP alternatives: 24k freed
- [ 0.024552] ACPI: Core revision 20121018
- [ 0.028020] ftrace: allocating 26123 entries in 52 pages
- [ 0.040187] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.041270] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.082077] smpboot: CPU0: Intel(R) Pentium(R) D CPU 3.00GHz (fam: 0f, model: 06, stepping: 02)
- [ 0.084000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
- [ 0.084000] ... version: 0
- [ 0.084000] ... bit width: 40
- [ 0.084000] ... generic registers: 18
- [ 0.084000] ... value mask: 000000ffffffffff
- [ 0.084000] ... max period: 0000007fffffffff
- [ 0.084000] ... fixed-purpose events: 0
- [ 0.084000] ... event mask: 000000000003ffff
- [ 0.084000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.084000] CPU 1 irqstacks, hard=f4cd4000 soft=f4cd6000
- [ 0.020000] Initializing CPU#1
- [ 0.084000] smpboot: Booting Node 0, Processors #1
- [ 0.095191] TSC synchronization [CPU#0 -> CPU#1]:
- [ 0.095196] Measured 1019334585 cycles TSC warp between CPUs, turning off TSC clock.
- [ 0.095199] tsc: Marking TSC unstable due to check_tsc_sync_source failed
- [ 0.095229] Brought up 2 CPUs
- [ 0.095235] smpboot: Total of 2 processors activated (11968.33 BogoMIPS)
- [ 0.096192] devtmpfs: initialized
- [ 0.096319] EVM: security.selinux
- [ 0.096322] EVM: security.SMACK64
- [ 0.096324] EVM: security.capability
- [ 0.096360] PM: Registering ACPI NVS region [mem 0x7ffdf000-0x7fffffff] (135168 bytes)
- [ 0.100281] regulator-dummy: no parameters
- [ 0.100365] NET: Registered protocol family 16
- [ 0.100578] EISA bus registered
- [ 0.100705] ACPI: bus type pci registered
- [ 0.100793] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.100797] PCI: not using MMCONFIG
- [ 0.100847] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
- [ 0.100911] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
- [ 0.100914] PCI: Using configuration type 1 for base access
- [ 0.101061] mtrr: your CPUs had inconsistent variable MTRR settings
- [ 0.101064] mtrr: probably your BIOS does not setup all CPUs.
- [ 0.101066] mtrr: corrected configuration.
- [ 0.102577] bio: create slab <bio-0> at 0
- [ 0.102577] ACPI: Added _OSI(Module Device)
- [ 0.102577] ACPI: Added _OSI(Processor Device)
- [ 0.102577] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.102577] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.104403] ACPI: EC: Look up EC in DSDT
- [ 0.107170] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.113118] ACPI: Interpreter enabled
- [ 0.113129] ACPI: (supports S0 S3 S4 S5)
- [ 0.113156] ACPI: Using IOAPIC for interrupt routing
- [ 0.113638] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.116628] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- [ 0.116632] PCI: Using MMCONFIG for extended config space
- [ 0.129428] ACPI: No dock devices found.
- [ 0.129438] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
- [ 0.129526] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.129532] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.129755] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
- [ 0.129761] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
- [ 0.129765] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- [ 0.129769] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
- [ 0.129773] PCI: root bus 00: using default resources
- [ 0.129816] PCI host bridge to bus 0000:00
- [ 0.129822] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.129826] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
- [ 0.129830] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
- [ 0.129845] pci 0000:00:00.0: [1002:5a33] type 00 class 0x060000
- [ 0.129873] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
- [ 0.129913] pci 0000:00:02.0: [1002:5a34] type 01 class 0x060400
- [ 0.129991] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
- [ 0.130076] pci 0000:00:19.0: [10b9:5249] type 01 class 0x060400
- [ 0.130191] pci 0000:00:1c.0: [10b9:5237] type 00 class 0x0c0310
- [ 0.130214] pci 0000:00:1c.0: reg 10: [mem 0xff6ff000-0xff6fffff]
- [ 0.130321] pci 0000:00:1c.1: [10b9:5237] type 00 class 0x0c0310
- [ 0.130344] pci 0000:00:1c.1: reg 10: [mem 0xff6fe000-0xff6fefff]
- [ 0.130450] pci 0000:00:1c.2: [10b9:5237] type 00 class 0x0c0310
- [ 0.130473] pci 0000:00:1c.2: reg 10: [mem 0xff6fd000-0xff6fdfff]
- [ 0.130589] pci 0000:00:1c.3: [10b9:5239] type 00 class 0x0c0320
- [ 0.130621] pci 0000:00:1c.3: reg 10: [mem 0xff6fcc00-0xff6fccff]
- [ 0.130758] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 0.130802] pci 0000:00:1d.0: [10b9:5461] type 00 class 0x040300
- [ 0.130837] pci 0000:00:1d.0: reg 10: [mem 0xff6f8000-0xff6fbfff 64bit]
- [ 0.130947] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.130974] pci 0000:00:1e.0: [10b9:1573] type 00 class 0x060100
- [ 0.131117] pci 0000:00:1e.1: [10b9:7101] type 00 class 0x068000
- [ 0.131242] pci 0000:00:1e.1: quirk: [io 0x4000-0x403f] claimed by ali7101 ACPI
- [ 0.131294] pci 0000:00:1f.0: [10b9:5229] type 00 class 0x01018a
- [ 0.131373] pci 0000:00:1f.0: reg 20: [io 0xff00-0xff0f]
- [ 0.131470] pci 0000:00:1f.1: [10b9:5287] type 00 class 0x010400
- [ 0.131498] pci 0000:00:1f.1: reg 10: [io 0xec00-0xec0f]
- [ 0.131515] pci 0000:00:1f.1: reg 14: [io 0xe800-0xe807]
- [ 0.131531] pci 0000:00:1f.1: reg 18: [io 0xe400-0xe40f]
- [ 0.131547] pci 0000:00:1f.1: reg 1c: [io 0xe000-0xe007]
- [ 0.131563] pci 0000:00:1f.1: reg 20: [io 0xdc00-0xdc1f]
- [ 0.131579] pci 0000:00:1f.1: reg 24: [mem 0xff6fc800-0xff6fcbff]
- [ 0.131638] pci 0000:00:1f.1: PME# supported from D3hot
- [ 0.131734] pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
- [ 0.131757] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.131774] pci 0000:01:00.0: reg 18: [mem 0xff4e0000-0xff4fffff 64bit]
- [ 0.131786] pci 0000:01:00.0: reg 20: [io 0xb800-0xb8ff]
- [ 0.131807] pci 0000:01:00.0: reg 30: [mem 0xff4c0000-0xff4dffff pref]
- [ 0.131858] pci 0000:01:00.0: supports D1 D2
- [ 0.131892] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
- [ 0.131915] pci 0000:01:00.1: reg 10: [mem 0xff4bc000-0xff4bffff 64bit]
- [ 0.132016] pci 0000:01:00.1: supports D1 D2
- [ 0.140021] pci 0000:00:02.0: PCI bridge to [bus 01]
- [ 0.140030] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
- [ 0.140035] pci 0000:00:02.0: bridge window [mem 0xff400000-0xff4fffff]
- [ 0.140043] pci 0000:00:02.0: bridge window [mem 0xbfe00000-0xdfefffff 64bit pref]
- [ 0.140141] pci 0000:02:11.0: [10b7:9055] type 00 class 0x020000
- [ 0.140174] pci 0000:02:11.0: reg 10: [io 0xcc00-0xcc7f]
- [ 0.140192] pci 0000:02:11.0: reg 14: [mem 0xff5ffc00-0xff5ffc7f]
- [ 0.140271] pci 0000:02:11.0: reg 30: [mem 0xff5c0000-0xff5dffff pref]
- [ 0.140324] pci 0000:02:11.0: supports D1 D2
- [ 0.140328] pci 0000:02:11.0: PME# supported from D1 D2 D3hot
- [ 0.140363] pci 0000:02:12.0: [104c:9066] type 00 class 0x028000
- [ 0.140396] pci 0000:02:12.0: reg 10: [mem 0xff5fc000-0xff5fdfff]
- [ 0.140414] pci 0000:02:12.0: reg 14: [mem 0xff5a0000-0xff5bffff]
- [ 0.140542] pci 0000:02:12.0: supports D1 D2
- [ 0.140545] pci 0000:02:12.0: PME# supported from D0 D1 D2 D3hot
- [ 0.140590] pci 0000:02:15.0: [11ab:4320] type 00 class 0x020000
- [ 0.140628] pci 0000:02:15.0: reg 10: [mem 0xff5f8000-0xff5fbfff]
- [ 0.140646] pci 0000:02:15.0: reg 14: [io 0xc800-0xc8ff]
- [ 0.140727] pci 0000:02:15.0: reg 30: [mem 0xff580000-0xff59ffff pref]
- [ 0.140798] pci 0000:02:15.0: supports D1 D2
- [ 0.140802] pci 0000:02:15.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.140840] pci 0000:02:16.0: [1106:3044] type 00 class 0x0c0010
- [ 0.140873] pci 0000:02:16.0: reg 10: [mem 0xff5ff000-0xff5ff7ff]
- [ 0.140892] pci 0000:02:16.0: reg 14: [io 0xc400-0xc47f]
- [ 0.141023] pci 0000:02:16.0: supports D2
- [ 0.141027] pci 0000:02:16.0: PME# supported from D2 D3hot D3cold
- [ 0.141064] pci 0000:00:19.0: PCI bridge to [bus 02]
- [ 0.141072] pci 0000:00:19.0: bridge window [io 0xc000-0xcfff]
- [ 0.141079] pci 0000:00:19.0: bridge window [mem 0xff500000-0xff5fffff]
- [ 0.141099] pci_bus 0000:00: on NUMA node 0
- [ 0.141121] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
- [ 0.141205] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2P._PRT]
- [ 0.141383] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
- [ 0.141387] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
- [ 0.142786] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled.
- [ 0.142930] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 0.143070] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- [ 0.143208] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.143347] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.143486] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.143624] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.143764] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.143903] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.144050] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.144050] vgaarb: loaded
- [ 0.144050] vgaarb: bridge control possible 0000:01:00.0
- [ 0.144392] SCSI subsystem initialized
- [ 0.144398] ACPI: bus type scsi registered
- [ 0.144437] libata version 3.00 loaded.
- [ 0.144437] ACPI: bus type usb registered
- [ 0.144437] usbcore: registered new interface driver usbfs
- [ 0.144437] usbcore: registered new interface driver hub
- [ 0.144437] usbcore: registered new device driver usb
- [ 0.144437] PCI: Using ACPI for IRQ routing
- [ 0.144437] PCI: pci_cache_line_size set to 64 bytes
- [ 0.144437] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xff400000-0xff4fffff]
- [ 0.144437] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
- [ 0.144437] e820: reserve RAM buffer [mem 0x7ffd0000-0x7fffffff]
- [ 0.144437] NetLabel: Initializing
- [ 0.144437] NetLabel: domain hash size = 128
- [ 0.144437] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.144437] NetLabel: unlabeled traffic allowed by default
- [ 0.144437] Switching to clocksource refined-jiffies
- [ 0.159019] AppArmor: AppArmor Filesystem Enabled
- [ 0.159068] pnp: PnP ACPI init
- [ 0.159093] ACPI: bus type pnp registered
- [ 0.159200] pnp 00:00: [dma 4]
- [ 0.159248] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.159321] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.159464] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.159515] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.160412] pnp 00:04: [dma 0 disabled]
- [ 0.160546] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.161415] pnp 00:05: [dma 0 disabled]
- [ 0.161539] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.163702] pnp 00:06: [dma 2]
- [ 0.163779] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
- [ 0.165089] pnp 00:07: [dma 3]
- [ 0.165569] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
- [ 0.166677] system 00:08: [io 0x0a00-0x0a0f] has been reserved
- [ 0.166683] system 00:08: [io 0x0a10-0x0a1f] has been reserved
- [ 0.166687] system 00:08: [io 0x0a20-0x0a2f] has been reserved
- [ 0.166692] system 00:08: [io 0x0a30-0x0a3f] has been reserved
- [ 0.166697] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.166798] system 00:09: [io 0x028d-0x028e] has been reserved
- [ 0.166804] system 00:09: [io 0x0480-0x048f] has been reserved
- [ 0.166808] system 00:09: [io 0x04d0-0x04d1] has been reserved
- [ 0.166813] system 00:09: [mem 0xff380000-0xff3fffff] has been reserved
- [ 0.166818] system 00:09: [mem 0xfff80000-0xffffffff] has been reserved
- [ 0.166822] system 00:09: [mem 0xffb00000-0xffbfffff] has been reserved
- [ 0.166826] system 00:09: [mem 0xfeb00000-0xfeb00fff] has been reserved
- [ 0.166831] system 00:09: [mem 0xff780000-0xff7fffff] has been reserved
- [ 0.166836] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.166987] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.166992] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.166998] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.167095] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.167101] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.167305] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
- [ 0.167311] pnp 00:0c: disabling [mem 0x000c0000-0x000dffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
- [ 0.167316] pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
- [ 0.167321] pnp 00:0c: disabling [mem 0x00100000-0x7fffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
- [ 0.167382] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.167637] pnp: PnP ACPI: found 13 devices
- [ 0.167641] ACPI: ACPI bus type pnp unregistered
- [ 0.167646] PnPBIOS: Disabled by ACPI PNP
- [ 0.205950] Switching to clocksource acpi_pm
- [ 0.206017] pci 0000:00:02.0: PCI bridge to [bus 01]
- [ 0.206024] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
- [ 0.206031] pci 0000:00:02.0: bridge window [mem 0xff400000-0xff4fffff]
- [ 0.206037] pci 0000:00:02.0: bridge window [mem 0xbfe00000-0xdfefffff 64bit pref]
- [ 0.206044] pci 0000:00:19.0: PCI bridge to [bus 02]
- [ 0.206049] pci 0000:00:19.0: bridge window [io 0xc000-0xcfff]
- [ 0.206058] pci 0000:00:19.0: bridge window [mem 0xff500000-0xff5fffff]
- [ 0.206087] pci 0000:00:19.0: setting latency timer to 64
- [ 0.206094] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
- [ 0.206098] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
- [ 0.206102] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
- [ 0.206106] pci_bus 0000:01: resource 1 [mem 0xff400000-0xff4fffff]
- [ 0.206110] pci_bus 0000:01: resource 2 [mem 0xbfe00000-0xdfefffff 64bit pref]
- [ 0.206114] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
- [ 0.206118] pci_bus 0000:02: resource 1 [mem 0xff500000-0xff5fffff]
- [ 0.206168] NET: Registered protocol family 2
- [ 0.206401] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.206464] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.206528] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.206604] TCP: reno registered
- [ 0.206609] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.206628] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.206717] NET: Registered protocol family 1
- [ 0.206734] pci 0000:00:00.0: MSI quirk detected; MSI disabled
- [ 0.852092] PCI: CLS mismatch (64 != 512), using 64 bytes
- [ 0.852101] pci 0000:01:00.0: Boot video device
- [ 0.852199] Trying to unpack rootfs image as initramfs...
- [ 1.285015] Freeing initrd memory: 15628k freed
- [ 1.302640] Initialise module verification
- [ 1.302711] audit: initializing netlink socket (disabled)
- [ 1.302738] type=2000 audit(1374697040.299:1): initialized
- [ 1.330189] bounce pool size: 64 pages
- [ 1.330211] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 1.332673] VFS: Disk quotas dquot_6.5.2
- [ 1.332741] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 1.333605] fuse init (API version 7.20)
- [ 1.333731] msgmni has been set to 1719
- [ 1.334662] Key type asymmetric registered
- [ 1.334667] Asymmetric key parser 'x509' registered
- [ 1.334765] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 1.334825] io scheduler noop registered
- [ 1.334828] io scheduler deadline registered (default)
- [ 1.334842] io scheduler cfq registered
- [ 1.335134] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 1.335162] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 1.335389] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 1.335399] ACPI: Power Button [PWRB]
- [ 1.335467] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 1.335472] ACPI: Power Button [PWRF]
- [ 1.347572] GHES: HEST is not enabled!
- [ 1.347665] isapnp: Scanning for PnP cards...
- [ 1.347729] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 1.368453] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 1.389163] 00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- [ 1.391044] Linux agpgart interface v0.103
- [ 1.393027] brd: module loaded
- [ 1.393975] loop: module loaded
- [ 1.394575] libphy: Fixed MDIO Bus: probed
- [ 1.394689] tun: Universal TUN/TAP device driver, 1.6
- [ 1.394692] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.394745] PPP generic driver version 2.4.2
- [ 1.394805] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.394808] ehci-pci: EHCI PCI platform driver
- [ 1.394862] ehci-pci 0000:00:1c.3: EHCI Host Controller
- [ 1.394873] ehci-pci 0000:00:1c.3: new USB bus registered, assigned bus number 1
- [ 1.394895] ehci-pci 0000:00:1c.3: debug port 1
- [ 1.394970] ehci-pci 0000:00:1c.3: irq 23, io mem 0xff6fcc00
- [ 1.404038] ehci-pci 0000:00:1c.3: USB 2.0 started, EHCI 1.00
- [ 1.404072] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.404077] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.404080] usb usb1: Product: EHCI Host Controller
- [ 1.404084] usb usb1: Manufacturer: Linux 3.8.0-26-generic ehci_hcd
- [ 1.404087] usb usb1: SerialNumber: 0000:00:1c.3
- [ 1.404232] hub 1-0:1.0: USB hub found
- [ 1.404240] hub 1-0:1.0: 8 ports detected
- [ 1.404525] ehci-platform: EHCI generic platform driver
- [ 1.404540] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.404579] ohci_hcd 0000:00:1c.0: OHCI Host Controller
- [ 1.404588] ohci_hcd 0000:00:1c.0: new USB bus registered, assigned bus number 2
- [ 1.404632] ohci_hcd 0000:00:1c.0: irq 17, io mem 0xff6ff000
- [ 1.462055] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.462060] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.462063] usb usb2: Product: OHCI Host Controller
- [ 1.462067] usb usb2: Manufacturer: Linux 3.8.0-26-generic ohci_hcd
- [ 1.462070] usb usb2: SerialNumber: 0000:00:1c.0
- [ 1.462206] hub 2-0:1.0: USB hub found
- [ 1.462217] hub 2-0:1.0: 3 ports detected
- [ 1.462352] ohci_hcd 0000:00:1c.1: OHCI Host Controller
- [ 1.462361] ohci_hcd 0000:00:1c.1: new USB bus registered, assigned bus number 3
- [ 1.462404] ohci_hcd 0000:00:1c.1: irq 18, io mem 0xff6fe000
- [ 1.518057] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.518061] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.518065] usb usb3: Product: OHCI Host Controller
- [ 1.518069] usb usb3: Manufacturer: Linux 3.8.0-26-generic ohci_hcd
- [ 1.518072] usb usb3: SerialNumber: 0000:00:1c.1
- [ 1.518206] hub 3-0:1.0: USB hub found
- [ 1.518215] hub 3-0:1.0: 3 ports detected
- [ 1.518359] ohci_hcd 0000:00:1c.2: OHCI Host Controller
- [ 1.518370] ohci_hcd 0000:00:1c.2: new USB bus registered, assigned bus number 4
- [ 1.518414] ohci_hcd 0000:00:1c.2: irq 19, io mem 0xff6fd000
- [ 1.574060] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.574065] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.574069] usb usb4: Product: OHCI Host Controller
- [ 1.574072] usb usb4: Manufacturer: Linux 3.8.0-26-generic ohci_hcd
- [ 1.574076] usb usb4: SerialNumber: 0000:00:1c.2
- [ 1.574199] hub 4-0:1.0: USB hub found
- [ 1.574209] hub 4-0:1.0: 3 ports detected
- [ 1.574333] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.574460] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 1.577008] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.577018] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 1.577172] mousedev: PS/2 mouse device common for all mice
- [ 1.577347] rtc_cmos 00:01: RTC can wake from S4
- [ 1.577517] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
- [ 1.577564] rtc0: alarms up to one month, 114 bytes nvram
- [ 1.577711] device-mapper: uevent: version 1.0.3
- [ 1.577805] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
- [ 1.577833] EISA: Probing bus 0 at eisa.0
- [ 1.577865] Cannot allocate resource for EISA slot 4
- [ 1.577893] EISA: Detected 0 cards.
- [ 1.577907] cpufreq-nforce2: No nForce2 chipset.
- [ 1.577911] cpuidle: using governor ladder
- [ 1.577913] cpuidle: using governor menu
- [ 1.577919] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.577922] EFI Variables Facility v0.08 2004-May-17
- [ 1.578196] ashmem: initialized
- [ 1.578368] TCP: cubic registered
- [ 1.578531] NET: Registered protocol family 10
- [ 1.578801] NET: Registered protocol family 17
- [ 1.578819] Key type dns_resolver registered
- [ 1.579040] Using IPI No-Shortcut mode
- [ 1.579161] Loading module verification certificates
- [ 1.583764] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: d1850ecb2327d153922b22332b63536822dc0add'
- [ 1.583785] registered taskstats version 1
- [ 1.587827] Key type trusted registered
- [ 1.591141] Key type encrypted registered
- [ 1.594907] rtc_cmos 00:01: setting system clock to 2013-07-24 20:17:21 UTC (1374697041)
- [ 1.595001] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 1.595004] EDD information not available.
- [ 1.702868] isapnp: No Plug & Play device found
- [ 1.702992] Freeing unused kernel memory: 788k freed
- [ 1.703677] Write protecting the kernel text: 6256k
- [ 1.703793] Write protecting the kernel read-only data: 2432k
- [ 1.703796] NX-protecting the kernel data: 3984k
- [ 1.725797] udevd[96]: starting version 175
- [ 1.822579] Disabling lock debugging due to kernel taint
- [ 1.832081] usb 1-5: new high-speed USB device number 4 using ehci-pci
- [ 1.845658] FDC 0 is a post-1991 82077
- [ 1.871573] scsi0 : pata_ali
- [ 1.879836] scsi1 : pata_ali
- [ 1.880735] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
- [ 1.880740] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
- [ 1.880987] sata_uli 0000:00:1f.1: version 1.3
- [ 1.885970] scsi2 : sata_uli
- [ 1.887060] scsi3 : sata_uli
- [ 1.892652] skge: 1.14 addr 0xff5f8000 irq 20 chip Yukon-Lite rev 9
- [ 1.892983] skge 0000:02:15.0 eth0: addr 00:16:ec:6b:61:36
- [ 1.894135] scsi4 : sata_uli
- [ 1.894918] scsi5 : sata_uli
- [ 1.895007] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 21
- [ 1.895013] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 21
- [ 1.895019] ata5: SATA max UDMA/133 cmd 0xec08 ctl 0xe806 bmdma 0xdc10 cmd 0xe409 ctl 0xe006 bmdma 0xdc18 irq 21
- [ 1.895024] ata6: SATA max UDMA/133 irq 21
- [ 1.960090] firewire_ohci 0000:02:16.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
- [ 1.960525] 3c59x: Donald Becker and others.
- [ 1.960544] 0000:02:11.0: 3Com PCI 3c905B Cyclone 100baseTx at f8414c00.
- [ 2.052407] ata1.00: ATAPI: HL-DT-ST DVD-RW_GSA-H11N, JH02, max UDMA/66
- [ 2.052414] ata1.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled
- [ 2.052417] ata1.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
- [ 2.063273] usb 1-5: New USB device found, idVendor=0bda, idProduct=0103
- [ 2.063281] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.063286] usb 1-5: Product: USB 2.0 Card Chip
- [ 2.063290] usb 1-5: Manufacturer: Generic
- [ 2.063293] usb 1-5: SerialNumber: 050610014271000001
- [ 2.098255] ata1.01: HPA detected: current 312579695, native 312581808
- [ 2.098264] ata1.01: ATA-7: ST3160215ACE, 3.ACB, max UDMA/100
- [ 2.098268] ata1.01: 312579695 sectors, multi 16: LBA48
- [ 2.112326] ata1.00: configured for UDMA/66
- [ 2.173016] ata1.01: configured for UDMA/100
- [ 2.182695] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RW_GSA-H11N JH02 PQ: 0 ANSI: 5
- [ 2.188854] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
- [ 2.188859] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 2.189049] sr 0:0:0:0: Attached scsi CD-ROM sr0
- [ 2.189240] sr 0:0:0:0: Attached scsi generic sg0 type 5
- [ 2.191274] scsi 0:0:1:0: Direct-Access ATA ST3160215ACE 3.AC PQ: 0 ANSI: 5
- [ 2.191536] sd 0:0:1:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)
- [ 2.191547] sd 0:0:1:0: Attached scsi generic sg1 type 0
- [ 2.191647] sd 0:0:1:0: [sda] Write Protect is off
- [ 2.191662] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.191722] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.460175] firewire_core 0000:02:16.0: created device fw0: GUID 00000ae6ff4ff2ec, S400
- [ 2.508473] Initializing USB Mass Storage driver...
- [ 2.508650] scsi6 : usb-storage 1-5:1.0
- [ 2.508782] usbcore: registered new interface driver usb-storage
- [ 2.508785] USB Mass Storage support registered.
- [ 2.512755] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
- [ 2.512761] ata1.01: BMDMA stat 0x64
- [ 2.512766] ata1.01: failed command: READ DMA
- [ 2.512773] ata1.01: cmd c8/00:01:00:00:00/00:00:00:00:00/f0 tag 0 dma 512 in
- [ 2.512773] res 51/84:00:00:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error)
- [ 2.512777] ata1.01: status: { DRDY ERR }
- [ 2.512780] ata1.01: error: { ICRC ABRT }
- [ 2.512826] ata1: soft resetting link
- [ 2.728305] ata1.00: configured for UDMA/66
- [ 2.808039] usb 3-2: new low-speed USB device number 2 using ohci_hcd
- [ 2.829362] ata1.01: configured for UDMA/100
- [ 2.831491] ata1: EH complete
- [ 3.020086] usb 3-2: New USB device found, idVendor=093a, idProduct=2510
- [ 3.020091] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.020095] usb 3-2: Product: USB OPTICAL MOUSE
- [ 3.020098] usb 3-2: Manufacturer: PIXART
- [ 3.054447] usbcore: registered new interface driver usbhid
- [ 3.054451] usbhid: USB HID core driver
- [ 3.062952] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1c.1/usb3/3-2/3-2:1.0/input/input2
- [ 3.063134] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1c.1-2/input0
- [ 3.169097] ata1.01: limiting speed to UDMA/66:PIO4
- [ 3.169103] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
- [ 3.169107] ata1.01: BMDMA stat 0x64
- [ 3.169111] ata1.01: failed command: READ DMA
- [ 3.169118] ata1.01: cmd c8/00:01:00:00:00/00:00:00:00:00/f0 tag 0 dma 512 in
- [ 3.169118] res 51/84:00:00:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error)
- [ 3.169122] ata1.01: status: { DRDY ERR }
- [ 3.169125] ata1.01: error: { ICRC ABRT }
- [ 3.169171] ata1: soft resetting link
- [ 3.328028] usb 3-3: new low-speed USB device number 3 using ohci_hcd
- [ 3.384305] ata1.00: configured for UDMA/66
- [ 3.469086] ata1.01: configured for UDMA/66
- [ 3.471215] ata1: EH complete
- [ 3.539820] scsi 6:0:0:0: Direct-Access Generic 2.0 Reader-CF 1.00 PQ: 0 ANSI: 0 CCS
- [ 3.542083] usb 3-3: New USB device found, idVendor=147a, idProduct=e00d
- [ 3.542088] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.542092] usb 3-3: Product: IR Receiver
- [ 3.542095] usb 3-3: Manufacturer: Acer
- [ 3.554155] input: Acer IR Receiver as /devices/pci0000:00/0000:00:1c.1/usb3/3-3/3-3:1.0/input/input3
- [ 3.554306] hid-generic 0003:147A:E00D.0002: input,hidraw1: USB HID v1.10 Device [Acer IR Receiver] on usb-0000:00:1c.1-3/input0
- [ 3.570447] scsi 6:0:0:1: Direct-Access Generic 2.0 Reader-SM/xD 1.00 PQ: 0 ANSI: 0 CCS
- [ 3.601059] scsi 6:0:0:2: Direct-Access Generic 2.0 Reader-SD 1.00 PQ: 0 ANSI: 0 CCS
- [ 3.631682] scsi 6:0:0:3: Direct-Access Generic 2.0 Reader-MS 1.00 PQ: 0 ANSI: 0 CCS
- [ 3.632793] sd 6:0:0:0: Attached scsi generic sg2 type 0
- [ 3.633040] sd 6:0:0:1: Attached scsi generic sg3 type 0
- [ 3.633315] sd 6:0:0:2: Attached scsi generic sg4 type 0
- [ 3.633545] sd 6:0:0:3: Attached scsi generic sg5 type 0
- [ 3.642061] sd 6:0:0:0: [sdb] Attached SCSI removable disk
- [ 3.642660] sd 6:0:0:1: [sdc] Attached SCSI removable disk
- [ 3.643655] sd 6:0:0:2: [sdd] Attached SCSI removable disk
- [ 3.644659] sd 6:0:0:3: [sde] Attached SCSI removable disk
- [ 3.728039] usb 2-1: new low-speed USB device number 2 using ohci_hcd
- [ 3.808838] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
- [ 3.808842] ata1.01: BMDMA stat 0x64
- [ 3.808848] ata1.01: failed command: READ DMA
- [ 3.808857] ata1.01: cmd c8/00:01:02:00:00/00:00:00:00:00/f0 tag 0 dma 512 in
- [ 3.808857] res 51/84:00:00:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error)
- [ 3.808861] ata1.01: status: { DRDY ERR }
- [ 3.808863] ata1.01: error: { ICRC ABRT }
- [ 3.808913] ata1: soft resetting link
- [ 3.943075] usb 2-1: New USB device found, idVendor=046d, idProduct=c312
- [ 3.943079] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.943083] usb 2-1: Product: USB Multimedia Keyboard
- [ 3.943087] usb 2-1: Manufacturer: LITEON Technology
- [ 3.953863] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1c.0/usb2/2-1/2-1:1.0/input/input4
- [ 3.954037] hid-generic 0003:046D:C312.0003: input,hidraw2: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1c.0-1/input0
- [ 4.024305] ata1.00: configured for UDMA/66
- [ 4.108818] ata1.01: configured for UDMA/66
- [ 4.110951] ata1: EH complete
- [ 4.448548] ata1.01: limiting speed to UDMA/33:PIO4
- [ 4.448553] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
- [ 4.448556] ata1.01: BMDMA stat 0x64
- [ 4.448560] ata1.01: failed command: READ DMA
- [ 4.448567] ata1.01: cmd c8/00:01:02:00:00/00:00:00:00:00/f0 tag 0 dma 512 in
- [ 4.448567] res 51/84:00:00:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error)
- [ 4.448571] ata1.01: status: { DRDY ERR }
- [ 4.448574] ata1.01: error: { ICRC ABRT }
- [ 4.448617] ata1: soft resetting link
- [ 4.664304] ata1.00: configured for UDMA/66
- [ 4.765160] ata1.01: configured for UDMA/33
- [ 4.767285] ata1: EH complete
- [ 4.872891] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
- [ 4.873544] sda: detected capacity change from 0 to 160040803840
- [ 4.873670] sd 0:0:1:0: [sda] Attached SCSI disk
- [ 10.491467] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
- [ 10.491474] EXT4-fs (sda5): write access will be enabled during recovery
- [ 12.638195] EXT4-fs (sda5): recovery complete
- [ 12.643810] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
- [ 26.818547] Adding 2095100k swap on /dev/sda6. Priority:-1 extents:1 across:2095100k
- [ 26.975160] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 26.975172] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 27.009405] udevd[406]: starting version 175
- [ 27.780134] type=1400 audit(1374689867.684:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=561 comm="apparmor_parser"
- [ 27.780751] type=1400 audit(1374689867.684:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=561 comm="apparmor_parser"
- [ 27.781091] type=1400 audit(1374689867.684:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=561 comm="apparmor_parser"
- [ 28.015402] lp: driver loaded but no devices found
- [ 28.059347] microcode: CPU0 sig=0xf62, pf=0x4, revision=0xf
- [ 28.117525] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 28.121240] ali1535_smbus 0000:00:1e.1: enabling device (0000 -> 0001)
- [ 28.121253] ali1535_smbus 0000:00:1e.1: ALI1535_smb region uninitialized - upgrade BIOS?
- [ 28.121257] ali1535_smbus 0000:00:1e.1: ALI1535 not detected, module not inserted.
- [ 28.162300] ali15x3_smbus 0000:00:1e.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
- [ 28.162315] ali15x3_smbus 0000:00:1e.1: ALI15X3 not detected, module not inserted.
- [ 28.207351] parport_pc 00:07: reported by Plug and Play ACPI
- [ 28.207481] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
- [ 28.271142] microcode: CPU1 sig=0xf62, pf=0x4, revision=0xf
- [ 28.275678] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
- [ 28.304511] lp0: using parport0 (interrupt-driven).
- [ 28.312324] ppdev: user-space parallel port driver
- [ 28.327902] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 28.392990] <6>[fglrx] Maximum main memory to use for locked dma buffers: 1889 MBytes.
- [ 28.393260] <6>[fglrx] vendor: 1002 device: 68f9 count: 1
- [ 28.393979] <6>[fglrx] ioport: bar 4, base 0xb800, size: 0x100
- [ 28.416929] <6>[fglrx] Kernel PAT support is enabled
- [ 28.416974] <6>[fglrx] module loaded - fglrx 9.1.11 [Nov 6 2012] with 1 minors
- [ 28.610373] input: HDA ULI M5461 Line as /devices/pci0000:00/0000:00:1d.0/sound/card0/input5
- [ 28.610608] input: HDA ULI M5461 Rear Mic as /devices/pci0000:00/0000:00:1d.0/sound/card0/input6
- [ 28.610836] input: HDA ULI M5461 Line Out Side as /devices/pci0000:00/0000:00:1d.0/sound/card0/input7
- [ 28.611035] input: HDA ULI M5461 Line Out CLFE as /devices/pci0000:00/0000:00:1d.0/sound/card0/input8
- [ 28.611234] input: HDA ULI M5461 Line Out Surround as /devices/pci0000:00/0000:00:1d.0/sound/card0/input9
- [ 28.611429] input: HDA ULI M5461 Line Out Front as /devices/pci0000:00/0000:00:1d.0/sound/card0/input10
- [ 28.612200] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
- [ 28.626454] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
- [ 31.784989] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
- [ 32.699998] init: failsafe main process (949) killed by TERM signal
- [ 33.115337] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
- [ 33.115343] vesafb: scrolling: redraw
- [ 33.115347] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
- [ 33.120303] vesafb: framebuffer at 0xc0000000, mapped to 0xf9100000, using 5824k, total 5824k
- [ 33.121859] Console: switching to colour frame buffer device 175x65
- [ 33.129208] fb0: VESA VGA frame buffer device
- [ 33.282320] Bluetooth: Core ver 2.16
- [ 33.282356] NET: Registered protocol family 31
- [ 33.282360] Bluetooth: HCI device and connection manager initialized
- [ 33.282376] Bluetooth: HCI socket layer initialized
- [ 33.282382] Bluetooth: L2CAP socket layer initialized
- [ 33.282394] Bluetooth: SCO socket layer initialized
- [ 33.324550] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 33.324557] Bluetooth: BNEP filters: protocol multicast
- [ 33.324574] Bluetooth: BNEP socket layer initialized
- [ 33.348077] Bluetooth: RFCOMM TTY layer initialized
- [ 33.348094] Bluetooth: RFCOMM socket layer initialized
- [ 33.348098] Bluetooth: RFCOMM ver 1.11
- [ 33.828739] init: avahi-cups-reload main process (1058) terminated with status 1
- [ 33.892680] type=1400 audit(1374689873.796:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1068 comm="apparmor_parser"
- [ 33.893395] type=1400 audit(1374689873.796:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1068 comm="apparmor_parser"
- [ 35.175147] eth1: setting half-duplex.
- [ 35.175266] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 35.176462] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 35.181955] skge 0000:02:15.0 eth0: enabling interface
- [ 35.185352] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 35.186510] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 35.979522] type=1400 audit(1374689875.880:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1106 comm="apparmor_parser"
- [ 35.979993] type=1400 audit(1374689875.880:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1106 comm="apparmor_parser"
- [ 35.980559] type=1400 audit(1374689875.884:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1107 comm="apparmor_parser"
- [ 35.981036] type=1400 audit(1374689875.884:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1107 comm="apparmor_parser"
- [ 35.985468] type=1400 audit(1374689875.888:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1109 comm="apparmor_parser"
- [ 35.985759] type=1400 audit(1374689875.888:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1108 comm="apparmor_parser"
- [ 35.986123] type=1400 audit(1374689875.888:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1109 comm="apparmor_parser"
- [ 35.986229] type=1400 audit(1374689875.888:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1108 comm="apparmor_parser"
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement