Advertisement
Guest User

Disk2-AS

a guest
Aug 1st, 2012
21
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.93 KB | None | 0 0
  1. smartctl 5.42 2011-10-20 r3458 [i686-linux-3.0.0-12-generic] (local build)
  2. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Barracuda 7200.12
  6. Device Model: ST31000524AS
  7. Serial Number: 6VPG4WKL
  8. LU WWN Device Id: 5 000c50 03e6b7add
  9. Firmware Version: JC4B
  10. User Capacity: 1,000,204,886,016 bytes [1.00 TB]
  11. Sector Size: 512 bytes logical/physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: 8
  14. ATA Standard is: ATA-8-ACS revision 4
  15. Local Time is: Mon Mar 26 17:55:17 2012 UTC
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART STATUS RETURN: incomplete response, ATA output registers missing
  21. SMART overall-health self-assessment test result: PASSED
  22. Warning: This result is based on an Attribute check.
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x82) Offline data collection activity
  26. was completed without error.
  27. Auto Offline Data Collection: Enabled.
  28. Self-test execution status: ( 121) The previous self-test completed having
  29. the read element of the test failed.
  30. Total time to complete Offline
  31. data collection: ( 609) seconds.
  32. Offline data collection
  33. capabilities: (0x7b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 1) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 178) minutes.
  50. Conveyance self-test routine
  51. recommended polling time: ( 2) minutes.
  52. SCT capabilities: (0x103f) SCT Status supported.
  53. SCT Error Recovery Control supported.
  54. SCT Feature Control supported.
  55. SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 10
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x000f 111 099 006 Pre-fail Always - 30877994
  61. 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
  62. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 71
  63. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  64. 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 20319948
  65. 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 3279
  66. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  67. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 71
  68. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  69. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  70. 187 Reported_Uncorrect 0x0032 087 087 000 Old_age Always - 13
  71. 188 Command_Timeout 0x0032 100 098 000 Old_age Always - 8590065666
  72. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  73. 190 Airflow_Temperature_Cel 0x0022 063 051 045 Old_age Always - 37 (Min/Max 25/37)
  74. 194 Temperature_Celsius 0x0022 037 049 000 Old_age Always - 37 (0 16 0 0 0)
  75. 195 Hardware_ECC_Recovered 0x001a 030 029 000 Old_age Always - 30877994
  76. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1
  77. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1
  78. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  79. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 276900836543837
  80. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 281364013
  81. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 4057580014
  82.  
  83. SMART Error Log Version: 1
  84. ATA Error Count: 13 (device log contains only the most recent five errors)
  85. CR = Command Register [HEX]
  86. FR = Features Register [HEX]
  87. SC = Sector Count Register [HEX]
  88. SN = Sector Number Register [HEX]
  89. CL = Cylinder Low Register [HEX]
  90. CH = Cylinder High Register [HEX]
  91. DH = Device/Head Register [HEX]
  92. DC = Device Command Register [HEX]
  93. ER = Error register [HEX]
  94. ST = Status register [HEX]
  95. Powered_Up_Time is measured from power on, and printed as
  96. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  97. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  98.  
  99. Error 13 occurred at disk power-on lifetime: 3184 hours (132 days + 16 hours)
  100. When the command that caused the error occurred, the device was active or idle.
  101.  
  102. After command completion occurred, registers were:
  103. ER ST SC SN CL CH DH
  104. -- -- -- -- -- -- --
  105. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  106.  
  107. Commands leading to the command that caused the error were:
  108. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  109. -- -- -- -- -- -- -- -- ---------------- --------------------
  110. 42 00 ff ff ff ff 4f 00 00:56:26.714 READ VERIFY SECTOR(S) EXT
  111. 42 00 ff ff ff ff 4f 00 00:56:23.023 READ VERIFY SECTOR(S) EXT
  112. 42 00 ff ff ff ff 4f 00 00:56:18.680 READ VERIFY SECTOR(S) EXT
  113. 42 00 ff ff ff ff 4f 00 00:56:14.334 READ VERIFY SECTOR(S) EXT
  114. 42 00 ff ff ff ff 4f 00 00:56:09.974 READ VERIFY SECTOR(S) EXT
  115.  
  116. Error 12 occurred at disk power-on lifetime: 916 hours (38 days + 4 hours)
  117. When the command that caused the error occurred, the device was active or idle.
  118.  
  119. After command completion occurred, registers were:
  120. ER ST SC SN CL CH DH
  121. -- -- -- -- -- -- --
  122. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  123.  
  124. Commands leading to the command that caused the error were:
  125. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  126. -- -- -- -- -- -- -- -- ---------------- --------------------
  127. 60 00 00 ff ff ff 4f 00 00:02:30.845 READ FPDMA QUEUED
  128. 2f 00 01 10 00 00 00 00 00:02:30.674 READ LOG EXT
  129. 2f 00 01 10 00 00 00 00 00:02:30.674 READ LOG EXT
  130. 60 00 00 ff ff ff 4f 00 00:02:27.924 READ FPDMA QUEUED
  131. 2f 00 01 10 00 00 00 00 00:02:27.769 READ LOG EXT
  132.  
  133. Error 11 occurred at disk power-on lifetime: 916 hours (38 days + 4 hours)
  134. When the command that caused the error occurred, the device was active or idle.
  135.  
  136. After command completion occurred, registers were:
  137. ER ST SC SN CL CH DH
  138. -- -- -- -- -- -- --
  139. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  140.  
  141. Commands leading to the command that caused the error were:
  142. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  143. -- -- -- -- -- -- -- -- ---------------- --------------------
  144. 60 00 00 ff ff ff 4f 00 00:02:27.924 READ FPDMA QUEUED
  145. 2f 00 01 10 00 00 00 00 00:02:27.769 READ LOG EXT
  146. 2f 00 01 10 00 00 00 00 00:02:27.769 READ LOG EXT
  147. 60 00 00 ff ff ff 4f 00 00:02:25.048 READ FPDMA QUEUED
  148. 60 00 00 ff ff ff 4f 00 00:02:25.028 READ FPDMA QUEUED
  149.  
  150. Error 10 occurred at disk power-on lifetime: 916 hours (38 days + 4 hours)
  151. When the command that caused the error occurred, the device was active or idle.
  152.  
  153. After command completion occurred, registers were:
  154. ER ST SC SN CL CH DH
  155. -- -- -- -- -- -- --
  156. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  157.  
  158. Commands leading to the command that caused the error were:
  159. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  160. -- -- -- -- -- -- -- -- ---------------- --------------------
  161. 60 00 00 ff ff ff 4f 00 00:02:25.048 READ FPDMA QUEUED
  162. 60 00 00 ff ff ff 4f 00 00:02:25.028 READ FPDMA QUEUED
  163. 60 00 00 ff ff ff 4f 00 00:02:25.021 READ FPDMA QUEUED
  164. 60 00 00 ff ff ff 4f 00 00:02:20.688 READ FPDMA QUEUED
  165. 60 00 00 ff ff ff 4f 00 00:02:20.676 READ FPDMA QUEUED
  166.  
  167. Error 9 occurred at disk power-on lifetime: 416 hours (17 days + 8 hours)
  168. When the command that caused the error occurred, the device was active or idle.
  169.  
  170. After command completion occurred, registers were:
  171. ER ST SC SN CL CH DH
  172. -- -- -- -- -- -- --
  173. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  174.  
  175. Commands leading to the command that caused the error were:
  176. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  177. -- -- -- -- -- -- -- -- ---------------- --------------------
  178. 60 00 00 ff ff ff 4f 00 01:20:41.602 READ FPDMA QUEUED
  179. 2f 00 01 10 00 00 00 00 01:20:41.422 READ LOG EXT
  180. 60 00 00 ff ff ff 4f 00 01:20:38.663 READ FPDMA QUEUED
  181. 2f 00 01 10 00 00 00 00 01:20:38.474 READ LOG EXT
  182. 60 00 00 ff ff ff 4f 00 01:20:35.724 READ FPDMA QUEUED
  183.  
  184. SMART Self-test log structure revision number 1
  185. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  186. # 1 Extended offline Completed: read failure 90% 3208 275802348
  187.  
  188. SMART Selective self-test log data structure revision number 1
  189. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  190. 1 0 0 Not_testing
  191. 2 0 0 Not_testing
  192. 3 0 0 Not_testing
  193. 4 0 0 Not_testing
  194. 5 0 0 Not_testing
  195. Selective self-test flags (0x0):
  196. After scanning selected spans, do NOT read-scan remainder of disk.
  197. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement