Uboot


BOOTSPI
BIST0_OK
_OK!decomp
_done
done


Hello U-Boot


U-Boot 1.1.6 (Jan 16 2015 - 02:23:52)

Board: MSTAR KRITI (CPU Speed 576 MHz)
DRAM:  64 X 0 MBytes
U-Boot is running at DRAM 0x87610000
Module: USB FAT FLASH SPI LOGO OSD ENV=SERIAL
Flash is detected (0x0A02, 0x8C, 0x41, 0x16)
In:    serial
Out:   serial
Err:   serial
MSVC00B000100100208768TH0000000T
MDrv_PNL_Init u32PnlRiuBaseAddr = BF200000
MDrv_PNL_Init u32PMRiuBaseAddr = BF000000
Panel Library mismatch(03), please update to version 04
[_MDrv_PNL_Init_LPLL][305]pstPanelInitData->u16Width=1920, pstPanelInitData->u16Height=1080
[_MDrv_PNL_Init_LPLL][307]u16HTotal=2640,u16VTotal=1125,pstPanelInitData->u16HTotal=2640,pstPanelInitData->u16VTotal=1125, u16DefaultVFreq=500
[_MDrv_PNL_Init_Output_Dclk][350]pstPanelInitData->u16Width=1920, pstPanelInitData->u16Height=1080
[_MDrv_PNL_Init_Output_Dclk][352]u16HTotal=2640,u16VTotal=1125,pstPanelInitData->u16HTotal=2640,pstPanelInitData->u16VTotal=1125, u16DefaultVFreq=500
[XC,Version][0;36m 00442327
 [mno need to patch
DAC eTiming =6
HDMITx eTiming =7
HDMITx eTiming =7
Create Dolby single part name task failed!!
[Hal_VE_EnableDI][1430] bEnable = 0, bIsDNR2VE = 0
u32ReadBuffVirAddr = A0000000, u32IntBuffVirAddr = A0100000, u32OutBuffVirAddr = A0730000
verJPD_SetStatus >>>>>>>>>>> w:720,  h:576,  p:720

[GOP3, PID 0, TID 0x-1][Driver Version]: 0089, BuildNum: 0002, ChangeList: 00524916
 keypad_pressed is [0]
 ir_pressed is [0]
Hit any key to stop autoboot:  0
[MApi_LDR_GetOADBasicInfo,5052],gAppSwVersion:1
[1;41mcheck_auto_upgrade, 4642[0m

Check USB port[0]:
??? Waiting for Peripheral Connecting Fail...
usb init failed
Error, couldn't init Lowlevel part
Check USB port[1]:
Error, couldn't init Lowlevel part
Check USB port[2]:
Error, couldn't init Lowlevel part
[auto_boot,2821]
[STB_OAD_Update,2185]
[STB_OAD_Update,2220]
[STB_OAD_Update,2231]
[auto_boot][2843], No immediate SW RESET.
Start 75F2000 End 76CA000
UnProtect MIU block 0 : 0x75F2000 0x76CA000
offset 0x7001C, size 0x2AC6D9
WARNING: it is better to set flash start addr aligned to 65536 !!!
WARNING: it is better to set total length aligned to 65536 !!!
Flash is detected (0x0A02, 0x8C, 0x41, 0x16)
initialization done!
Start read 2AC6D9 data from serial device...
in=0x80B00000, in_size=0x2AC6D9, out= 0x80000180, alloc_buf = 0x81000000
in=0x80B00000, in_size=0x2AC6D9, out= 0x80000180, alloc_buf = 0x81000000
in_size=2803417 out_size=7916292 unpack_size=0


LZMA Decompression...CRC_result FFB2BA23 CRC_value FFB2BA23
CRC check success !!
ok

Start 75F2000 End 76CA000
UnProtect MIU block 0 : 0x75F2000 0x76CA000
disable interrupts
## Starting application at 0x80000224 ...
[eCos][CPU INFO] : CPU Clock = 576000000 : RTC Period = 288000
Hardware Initialize...
MApi_Sysbsp_CreateMemoryPool
upoolSize = 320000 and u32Addr = 97A9F8
MDrv_MIOMap_Init
MsOS_Init
MApi_Sysbsp_CreateMemoryPool
upoolSize = 320000 and u32Addr = 97A9F8
mdrv_gpio_init

007663290087
Auth OK
E_SYS_DOLBY_VERSION = 1
E_SYS_DOLBY_CONTROL_BIT = 1
E_SYS_DOLBY_REVERSE_BIT = 0
MIU Initialize...
Get IOMap u32NonPmBase = 0xbf200000
Get IOMap u32PmBase = 0xbf000000
Disable MIU1
WDT_Init
[MAPI_MEMINFO] DVBC System Memory Usage
[MAPI_MEMINFO] ============================ START         END           SIZE
[MAPI_MEMINFO] POOL_START                   0x00000000    0x013a8000    0x013a8000
[MAPI_MEMINFO] Cached Pool Start            0x0097a9f8    0x00c9a9f8    0x00320000
[MAPI_MEMINFO] NONCACHED_POOL_START         0x00c9a9f8    0x013a8000    0x0070d608
[MAPI_MEMINFO]
[MAPI_MEMINFO] Memory Layout:
[MAPI_MEMINFO] ============================ START         END           SIZE
[MAPI_MEMINFO] XC_MEM_START                 0x03d00000    0x04000000    0x00300000
[MAPI_MEMINFO] MAD_MEM_START                0x03b73000    0x03d00000    0x0018d000
[MAPI_MEMINFO] MVD_MEM_START                0x020a2000    0x03b72000    0x01ad0000
[MAPI_MEMINFO] VE_MEM_START                 0x01f01c00    0x020a2000    0x001a0400
[MAPI_MEMINFO] GOP_DMAMEM_START             0x01f00000    0x01f01000    0x00001000
[MAPI_MEMINFO] TSP_VQ_START                 0x01eff000    0x01f00000    0x00001000
[MAPI_MEMINFO] PM51_MEM_ADR                 0x01eff000    0x01eff000    0x00000000
[MAPI_MEMINFO] PM51_VAR_MEM_ADR             0x01eff000    0x01eff000    0x00000000
[MAPI_MEMINFO] GOP_GWINMEM_START            0x01b0b000    0x01efb000    0x003f0000
[MAPI_MEMINFO] INTERNAL_DVBT2_BUFFER_EQ_ADDR  0x01a75000    0x01b0b000    0x00096000
[MAPI_MEMINFO] INTERNAL_DVBT2_BUFFER_TDI_ADDR  0x01470000    0x01a70000    0x00600000
[MAPI_MEMINFO] INTERNAL_DVBT2_BUFFER_DJB_ADDR  0x013b0000    0x01470000    0x000c0000
[MAPI_MEMINFO] INTERNAL_DVBT2_BUFFER_FW_ADDR  0x013a8000    0x013b0000    0x00008000

[MAPI_MEMINFO] pFirstAvailableMemory        0x8097a9f8


Hello Hummingbird!!
_appDemo_Task.iId = 1985216514
[MsOS_SHM_GetId][3219] MsOS_SHM_Init: Unable to get available share memeory
create Audio SHM data ...
Audio SHM data is created
reset Audio SHM data ...
MApi_DigiTuner_Init mutex id 1985216519
MDrv_IIC_Init  PORT  1
MDrv_IIC_InitPort0: OK
MApi_DigiTuner_Init: Init demodulator!
>>> Allocate Addr = A13A2ED0 , FwPhyAddr = 013A2F00
@@@1@@@

 -----ECO MODE----************************ Start TSP_Init ************************
 <FWTSP> : RASP from TSIF_RASP
>> FwVersion:002F2500 , Date:20130722
************************* End TSP_Init *************************
>> DVBT2 SoftStop Fail!
##DVBT:TS Phase check !!, board version smaller than 4
>> DVBT SoftStop Fail!
firmware version: 1101
MApi_DigiTuner_Init: Init Tuner!
twin_tuner MDrv_Tuner_Init 95
[mxl608] read id =0x2
Delete Task [_appDrvLv1 Task] OK

 MXL608 INIT OK
twin_tuner MDrv_Tuner_Init 101
MApi_DigiTuner_Init: Demod_Open!
[[utopia]]      MApi_AUDIO_SetCommand() : Audio system is not ready yet, please try again later

[0;31m [Warning!!]No SRS TSXT license!![0m
[[utopia]]      MApi_AUDIO_ReleaseDecodeSystem() : Audio system is not ready yet, please try again later
[[utopia]]      MApi_AUDIO_ReleaseDecodeSystem() : Audio system is not ready yet, please try again later
[[utopia]]      MApi_AUDIO_ReleaseDecodeSystem() : Audio system is not ready yet, please try again later
 ADEC Done and do default setting 4
===== Check Audio Decoder Protection from hash-key IP =====
Hash-key Support DD.
Hash-key Support DD+.
Hash-key Support Generic HE-AAC!!
Hash Key Check WMA Fail, no WMA license!!
Hash-key Support DRA.
Hash Key Check Dolby MS11 Fail, no Dolby MS11 license!!
Hash Key Check DTSE Fail, no DTSE license!!
Hash Key Check DTSNeoUltra Fail, no DTSNeoUltra license!!
Hash Key Check SRS_TSHD Fail, no SRS_TSHD license!!
Hash Key Check SRS_THEATERSOUND Fail, no SRS_THEATERSOUND license!!
Hash Key Check DTS_StudioSound3D Fail, no DTS_StudioSound3D license!!
Hash Key Check COOK Fail, no COOK license!!
===== Check Protection IP End                         =====
[_SysInit_InitAPI][1608]SPI Flash Driver Init !!
Flash is detected (0x0A02, 0x8C, 0x41, 0x16)
MDrv_PNL_Init u32PnlRiuBaseAddr = bf200000
MDrv_PNL_Init u32PMRiuBaseAddr = bf000000
[XC,Version][0;36m 00442327
 [mno need to patch
DAC eTiming =6
DAC eTiming =6
Delete Task [_appDrvLv2 Task] OK
HDMITx eTiming =7
Wait V Sync!!
[Hal_VE_EnableDI][1436] bEnable = 0, bIsDNR2VE = 0
driver GE init ok
[MApi_Sysbsp_InitGEGOP][1332]
[MApi_Sysbsp_InitGEGOP][1336]

[GOP0, PID 0, TID 0x-2139474624][Driver Version]: 0089, BuildNum: 2147483647, ChangeList: 00524916
[MApi_Sysbsp_InitGEGOP][1362]driver GOP0 init ok

[GOP1, PID 0, TID 0x-2139474624][Driver Version]: 0089, BuildNum: 2147483647, ChangeList: 00524916
[MApi_Sysbsp_InitGEGOP][1362]driver GOP1 init ok

[GOP2, PID 0, TID 0x-2139474624][Driver Version]: 0089, BuildNum: 2147483647, ChangeList: 00524916
[MApi_Sysbsp_InitGEGOP][1362]driver GOP2 init ok
GE_Init done
BASEADDRESS_STRING_DATABASE_IN_FLASH = 00370000
BASEADDRESS_BITMAP_DATABASE_IN_FLASH = 00370000
BASEADDRESS_GENSETTING_IN_FLASH = 00370000
BASEADDRESS_CURRENT_DTV_ORDER_IN_FLASH = 00380000
BASEADDRESS_CH_DATABASE_IN_FLASH = 00390000
BASEADDRESS_MOSAIC_IN_FLASH = 003D0000
BASEADDRESS_TFCA_MAIL_IN_FLASH = 003E0000
NUMBER_OF_CURRENT_DTV_PROGRAM = 00001000
MApi_VectorFont_Init total size=3276800, free size=3256208, large size=3256196
yurian alloc mem 0x330c
yurian alloc mem 0x1f14


 0SysInit done .................................................
Delete Task [InitAPI Task] OK
into _appMain_Task
[MApp_CheckFlash][1488] s8SN0 = 1
MApi_DB_CM_LoadDTVProgramDatabaseFromFlash   -- u16Index[1770] [4096]
MApi_DB_CM_InitDTVDataManager: m_eCurrentServiceType = 1
MApi_DB_CM_InitDTVDataManager: m_wCurrentOrderOfTV = 1
MApi_DB_CM_InitDTVDataManager: m_wCurrentOrderOfRadio = 19
MApi_DB_CM_InitDTVDataManager: m_wCurrentOrderOfMosaic = 0
MApi_DB_CM_InitDTVDataManager: m_wCurrentOrderOfNvod_Ref = 0
MApi_DB_CM_InitDTVDataManager: m_wCurrentOrderOfNvod_TimeShifted = 0
Request extension function (5) does not exist
========= MDrv_Demod_Restart ===========
pParam->u32Frequency = 8f110
pParam->TerParam.u8PlpID = 0
pParam->TerParam.u8ScanType = 1
pParam->TerParam.eBandWidth = 2
pParam->TerParam.eHierarchy = 80840000
pParam->TerParam.eGuardInterval = e0e0012
pParam->TerParam.eFFT_Mode = 806c0000
pParam->TerParam.eHPCodeRate = 8024cb40
pParam->TerParam.eLPCodeRate = 806c0000
pParam->TerParam.eLevelSel = 80139ce8
 ====> DVBT2
>>> DVBT2_FW_START_ADDR=0x13a8000
>>> DVBT2_EQ_START_ADDR=0x1a75000
>>> DVBT2_TDI_START_ADDR=0x1470000
>>> DVBT2_DJB_START_ADDR=0x13b0000
>> DVBT2 SoftStop Fail!
HAL_SYS_DMD_VD_MBX_DVB_WaitHandShake Timeout
Tuner locked
MxL608_0x5B : 10
MxL608_0x5C : b1
MxL608_0xC2 : a9
>> DVBT2 SoftStop Fail!
HAL_SYS_DMD_VD_MBX_DVB_WaitHandShake Timeout
Tuner Success
into appMain_AddApp
[ZUI] init: sz_msg_q=6216
fix appTV_GetInfo before using
SCART ON, CVBS ON, RGB ON
[msCHIP_DAC_SetOutputSource][156] input bitmap: 0x00000011
CVBS on
SVIDEO off, YPBPR off, RGB on
SCART on
problem happen
App_GetTVFormat:[0]
Path2
Set to Mixer
[msAPI_XC_ReMapComponentType][429]: msAPI_XC eTiming = 6
[Hal_VE_EnableDI][1436] bEnable = 0, bIsDNR2VE = 0
into appMain_AddApp
into appMain_AddApp
into appMain_AddApp
USB init
MDrv_Usb_Init..
Usb init
[NCM]The allocted address is 0xa120c4e0
Init Software Timer ok
Init USB MSC
[USB] MS USB Host Lib for KRITI only
Init chip KRITI, port 0
[USB] constant upll NLib usb_init start, UTMI base 0xbf207500, USBC base 0xbf200e00, UHC base 0xbf204800, USBBC base 0xbf240a00

[GOP3, PID 0, TID 0x-2139472776][Driver Version]: 00ehci_hcd (CPE_AMBA) at 0x0xbf204800, irq 7
new USB Bus, assigned pBus number 1
pQh: 0xa120d000, pQh->qh_dma_addr: 0x0120d000
Allocate a non-cacheable memory pool for periodic frame list array 0xa120f000, size 1024
qh dma addr: 0x0120d000
[EHCI] Enable Park Mode: 3
EHCI 1.00, driver eCos Newhost
[root hub] device address 1
89, BuildNum: 0002, ChangeList: 00524916
startup:8 [now=255,1]
MS_COMPONENT_OUTPUT_TYPE : 6
fix _MApp_ZUI_SUSB device product string (index 2) = CPE_AMBA EHCI
ms_ehci_hcd_cpe_ehci_drv_probe_EX -> allocate usb_hcd

Usb start EX..., gVar = 806b5a08

UsbTask EX ... port 0
etupDisplayList before using
SD: 720 x 576, HD: 960 x 720
[MApi_GOP_GWIN_Is32FBExist][6434]FbId 255  is out of range
MDrv_Usb_Done .................................................
RASP from TSIF_RASP
RASP from TSIF_RASP
RASP from TSIF_RASP
RASP from TSIF_RASP
MApi_EpgDB_SetExtendedEventPoolSize 0x4e0000
[+]MApi_EpgDB_Init
[EPGDB][000791]  =========================================================================
[EPGDB][000792]  _pu8EitBufMask:        (Start, End, Length)= (0xa120c4b0, 0xa120c4b5, 0x00000005)
[EPGDB][000793]  _pMapBufIdxTable:      (Start, End, Length)= (0xa11aad10, 0xa11aaea0, 0x00000190)
[EPGDB][000794]  _pu8EpgDbEvtMask       (Start, End, Length)= (0xa120c0b0, 0xa120c498, 0x000003e8)
[EPGDB][000795]  _pu8EpgDbScheHdrList   (Start, End, Length)= (0xa120b560, 0xa120c0a0, 0x00000b40)
[EPGDB][000796]  _pu8EpgDbSrvEvtList    (Start, End, Length)= (0xa12017d0, 0xa120b550, 0x00009d80)
[EPGDB][000797]  _pu8EpgDbSrvSecList    (Start, End, Length)= (0xa11ed7c0, 0xa12017c0, 0x00014000)
[EPGDB][000798]  _pu8EpgDbEvtHdrList    (Start, End, Length)= (0xa11aefb0, 0xa11ed7b0, 0x0003e800)
[EPGDB][000799]  _pu8EpgDbPfHdrList     (Start, End, Length)= (0xa11aeed0, 0xa11aef98, 0x000000c8)
[EPGDB][000800]  _pu8EpgDbPfPresent     (Start, End, Length)= (0xa11acec0, 0xa11aeec0, 0x00002000)
[EPGDB][000801]  _pu8EpgDbPfFollow      (Start, End, Length)= (0xa11aaeb0, 0xa11aceb0, 0x00002000)
[EPGDB][000806]  EPG database allocate 0x00541705 bytes
[EPGDB][000812]  =========================================================================
[-]MApi_EpgDB_Init
leave MApp_ZUI_API_InitCanvasGDI -> MApp_ZUI_API_GetFontMVF in 131
[MApi_GOP_GWIN_Is32FBExist][6434]FbId 255  is out of range
[MApi_GOP_GWIN_Is32FBExist][6434]FbId 255  is out of range
Set PAL
[MApi_SI_System_Startup] OK !!
SD Gwin = 4
[_appMain_Task]Delete Task [App]


App vserion $Change: 962377 $

[_appMain_Task],1292
disp[1]'s FBID = 2
HD Gwin = 0
[Zapper time] _appZapper_Command [5216]

[3151]  curPos_temp 1 PvrRecPosition  65535

[3152]  curPos_temp 0 PvrRecPosition  0

[3195]  _Estimate_Record_A_Play_B 0
 [Zapper time] Video on total Zapper time Zapper time [14]
[36m[Zapper time]Wait Tuner lock[2508] [m
Set PCR FLT=13 PID =       2C

[_Zapper_Enable_AV][3467]
[Zapper_switch_to_AD_Audio],line:8198, AudioTrackNum==1
[Zapper_switch_to_AD_Audio],line:8214 no AD
VDEC FW add = 0x20a2000
VDEC FB add = 0x2132000
VDEC BS add = 0x3772000
 [Zapper time] Video on total Zapper time Zapper time [4444]
Set PCR FLT=13 PID =     1FFF

yurian alloc mem 0x40000
yurian alloc mem 0x2400
yurian alloc mem 0x2000
yurian alloc mem 0x1000