Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@wirenboard:~# dmesg
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 3.13.0-imxv5-x0.1 (boger@boger-Latitude-E4310) (gcc version 4.7.4 20130913 (release) [ARM/embedded-4_7-branch revision 202601] (GNU Tools for ARM Embedded Processors) ) #45 Sat Mar 1
- 5 03:20:27 MSK 2014
- [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
- [ 0.000000] CPU: VIVT data cache, VIVT instruction cache
- [ 0.000000] Machine model: Wiren Board rev. 2.8 (i.MX23)
- [ 0.000000] Memory policy: Data cache writeback
- [ 0.000000] On node 0 totalpages: 16384
- [ 0.000000] free_area_init_node: node 0, pgdat c06e0754, node_mem_map c0c4b000
- [ 0.000000] Normal zone: 128 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
- [ 0.000000] Kernel command line: console=ttyAMA0,115200 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc video=
- [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Memory: 52312K/65536K available (4778K kernel code, 293K rwdata, 1684K rodata, 277K init, 5516K bss, 13224K reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xc4800000 - 0xff000000 ( 936 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
- [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc0657db0 (6464 kB)
- [ 0.000000] .init : 0xc0658000 - 0xc069d448 ( 278 kB)
- [ 0.000000] .data : 0xc069e000 - 0xc06e7410 ( 294 kB)
- [ 0.000000] .bss : 0xc06e7410 - 0xc0c4a7c8 (5517 kB)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] of_irq_init: children remain, but no parents
- [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836480000000ns
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
- [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
- [ 0.000000] ... MAX_LOCK_DEPTH: 48
- [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
- [ 0.000000] ... CLASSHASH_SIZE: 4096
- [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
- [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
- [ 0.000000] ... CHAINHASH_SIZE: 16384
- [ 0.000000] memory used by lock dependency info: 3695 kB
- [ 0.000000] per task-struct memory footprint: 1152 bytes
- [ 0.070000] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496)
- [ 0.070000] pid_max: default: 32768 minimum: 301
- [ 0.070000] Mount-cache hash table entries: 512
- [ 0.090000] CPU: Testing write buffer coherency: ok
- [ 0.100000] Setting up static identity map for 0x4048a878 - 0x4048a8d0
- [ 0.110000] devtmpfs: initialized
- [ 0.130000] pinctrl core: initialized pinctrl subsystem
- [ 0.130000] regulator-dummy: no parameters
- [ 0.140000] NET: Registered protocol family 16
- [ 0.140000] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.170000] gpiochip_add: registered GPIOs 0 to 31 on device: gpio.0
- [ 0.170000] gpiochip_add: registered GPIOs 32 to 63 on device: gpio.1
- [ 0.170000] gpiochip_add: registered GPIOs 64 to 95 on device: gpio.2
- [ 0.200000] Serial: AMBA PL011 UART driver
- [ 0.200000] 80070000.serial: ttyAMA0 at MMIO 0x80070000 (irq = 17, base_baud = 0) is a PL011 rev2
- [ 0.390000] console [ttyAMA0] enabled
- [ 0.420000] bio: create slab <bio-0> at 0
- [ 0.440000] mxs-dma 80004000.dma-apbh: initialized
- [ 0.460000] mxs-dma 80024000.dma-apbx: initialized
- [ 0.460000] usbcore: registered new interface driver usbfs
- [ 0.470000] usbcore: registered new interface driver hub
- [ 0.470000] usbcore: registered new device driver usb
- [ 0.480000] of_get_named_gpiod_flags exited with status 0
- [ 0.480000] of_get_named_gpiod_flags exited with status 0
- [ 0.480000] i2c i2c-0: Not I2C compliant: can't read SCL
- [ 0.480000] i2c i2c-0: Bus may be unreliable
- [ 0.490000] i2c-gpio i2c1sw.5: using pins 56 (SDA) and 55 (SCL, no clock stretching)
- [ 0.490000] pps_core: LinuxPPS API ver. 1 registered
- [ 0.500000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.500000] PTP clock support registered
- [ 0.510000] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.530000] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.540000] Switched to clocksource mxs_timer
- [ 0.950000] NET: Registered protocol family 2
- [ 0.960000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.970000] TCP bind hash table entries: 1024 (order: 3, 36864 bytes)
- [ 0.970000] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.980000] TCP: reno registered
- [ 0.980000] UDP hash table entries: 256 (order: 2, 20480 bytes)
- [ 0.990000] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
- [ 1.000000] NET: Registered protocol family 1
- [ 1.010000] NetWinder Floating Point Emulator V0.97 (double precision)
- [ 1.090000] msgmni has been set to 102
- [ 1.100000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- [ 1.110000] io scheduler noop registered (default)
- [ 1.130000] of_dma_request_slave_channel: dma-names property of node '/apb@80000000/apbx@80040000/serial@80070000' missing or empty
- [ 1.140000] uart-pl011 80070000.serial: no DMA platform data
- [ 1.150000] 8006c000.serial: ttyAPP0 at MMIO 0x8006c000 (irq = 144, base_baud = 1500000) is a 8006c000.serial
- [ 1.160000] mxs-auart 8006c000.serial: Found APPUART 3.0.0
- [ 1.170000] mxs-spi 80034000.ssp: cs-gpios count: 4
- [ 1.180000] of_get_named_gpiod_flags exited with status 0
- [ 1.180000] of_get_named_gpiod_flags exited with status 0
- [ 1.180000] of_get_named_gpiod_flags exited with status 0
- [ 1.180000] of_get_named_gpiod_flags exited with status 0
- [ 1.180000] of_get_named_gpiod_flags exited with status 0
- [ 1.180000] of_get_named_gpiod_flags exited with status 0
- [ 1.180000] of_get_named_gpiod_flags exited with status 0
- [ 1.180000] of_get_named_gpiod_flags exited with status 0
- [ 1.210000] spi spi1.3: gpio index 0, gpio_cs 17
- [ 1.210000] spi spi1.4: gpio index 1, gpio_cs 92
- [ 1.220000] spi spi1.5: gpio index 2, gpio_cs 52
- [ 1.230000] spi spi1.6: gpio index 3, gpio_cs 91
- [ 1.240000] PPP generic driver version 2.4.2
- [ 1.250000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.260000] usbcore: registered new interface driver usbserial
- [ 1.260000] usbcore: registered new interface driver usbserial_generic
- [ 1.270000] usbserial: USB Serial support registered for generic
- [ 1.280000] 80080000.usb supply vbus not found, using dummy regulator
- [ 1.290000] ci_hdrc ci_hdrc.0: doesn't support gadget
- [ 1.290000] ci_hdrc ci_hdrc.0: EHCI Host Controller
- [ 1.300000] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
- [ 1.330000] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
- [ 1.330000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.340000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.350000] usb usb1: Product: EHCI Host Controller
- [ 1.350000] usb usb1: Manufacturer: Linux 3.13.0-imxv5-x0.1 ehci_hcd
- [ 1.360000] usb usb1: SerialNumber: ci_hdrc.0
- [ 1.380000] hub 1-0:1.0: USB hub found
- [ 1.380000] hub 1-0:1.0: 1 port detected
- [ 1.400000] mousedev: PS/2 mouse device common for all mice
- [ 1.410000] stmp3xxx-rtc 8005c000.rtc: rtc core: registered 8005c000.rtc as rtc0
- [ 1.420000] i2c /dev entries driver
- [ 1.430000] stmp3xxx_rtc_wdt stmp3xxx_rtc_wdt: initialized watchdog with heartbeat 19s
- [ 1.440000] 80010000.ssp supply vmmc not found, using dummy regulator
- [ 1.450000] of_get_named_gpiod_flags: can't parse gpios property of node '/apb@80000000/apbh@80000000/ssp@80010000[0]'
- [ 1.490000] mxs-mmc 80010000.ssp: initialized
- [ 1.500000] imx23-pinctrl 80018000.pinctrl: pin SSP1_DETECT already requested by 80018000.pinctrl; cannot claim for leds.3
- [ 1.510000] imx23-pinctrl 80018000.pinctrl: pin-65 (leds.3) status -22
- [ 1.520000] imx23-pinctrl 80018000.pinctrl: could not request pin 65 (SSP1_DETECT) from group led_gpio2_1.0 on device 80018000.pinctrl
- [ 1.530000] leds-gpio leds.3: Error applying setting, reverse things back
- [ 1.540000] of_get_named_gpiod_flags exited with status 0
- [ 1.540000] of_get_named_gpiod_flags exited with status 0
- [ 1.560000] usbcore: registered new interface driver usbhid
- [ 1.560000] usbhid: USB HID core driver
- [ 1.580000] mmc0: host does not support reading read-only switch. assuming write-enable.
- [ 1.590000] mmc0: new high speed SDHC card at address 0007
- [ 1.610000] mmcblk0: mmc0:0007 SD4GB 3.70 GiB
- [ 1.620000] imx23-pinctrl 80018000.pinctrl: pin GPMI_D02 already requested by 80018000.pinctrl; cannot claim for mxs-builtin-audio.4
- [ 1.630000] imx23-pinctrl 80018000.pinctrl: pin-2 (mxs-builtin-audio.4) status -22
- [ 1.640000] imx23-pinctrl 80018000.pinctrl: could not request pin 2 (GPMI_D02) from group pin_gpio_pu_0_2.0 on device 80018000.pinctrl
- [ 1.650000] mxs-builtin-audio mxs-builtin-audio.4: Error applying setting, reverse things back
- [ 1.680000] mmcblk0: p1 p2
- [ 1.700000] mxs-builtin-audio mxs-builtin-audio.4: mxs-builtin-codec-dai <-> 80048000.mxs-builtin-cpu-dai mapping ok
- [ 1.720000] TCP: cubic registered
- [ 1.730000] NET: Registered protocol family 10
- [ 1.750000] sit: IPv6 over IPv4 tunneling driver
- [ 1.750000] NET: Registered protocol family 17
- [ 1.760000] Key type dns_resolver registered
- [ 1.770000] registered taskstats version 1
- [ 1.780000] stmp3xxx-rtc 8005c000.rtc: setting system clock to 1970-01-01 00:18:05 UTC (1085)
- [ 1.820000] ALSA device list:
- [ 1.820000] #0: mxs-builtin-audio
- [ 1.870000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 1.880000] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- [ 1.900000] devtmpfs: mounted
- [ 1.910000] Freeing unused kernel memory: 276K (c0658000 - c069d000)
- [ 5.680000] udevd[164]: starting version 175
- [ 11.280000] random: nonblocking pool is initialized
- [ 18.260000] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
- [ 19.250000] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
- [ 21.210000] sc16is7x2 spi1.3: probe start
- [ 21.220000] sc16is7x2 spi1.3: gpio-base=120
- [ 21.230000] sc16is7x2 spi1.3: uartclk=14745600
- [ 21.230000] sc16is7x2 spi1.3: uart_base=0
- [ 21.240000] irq: 28
- [ 21.250000] irq: 28
- [ 21.250000] gpiochip_add: registered GPIOs 120 to 127 on device: sc16is7x2
- [ 21.250000] sc16is7x2 spi1.3: sc16is7x2 at CS3 (irq 28), 2 UARTs, 8 GPIOs
- [ 21.250000] ttyNSC0, ttyNSC1, gpiochip120
- root@wirenboard:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement