Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Initializing cgroup subsys cpuset
- Initializing cgroup subsys cpu
- Linux version 2.6.37-ARCH (tobias@T-POWA-LX) (gcc version 4.5.2 20110127 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Feb 18 18:32:16 CET 2011
- Command line: root=/dev/mapper/crypt-root cryptdevice=/dev/sda2:crypt ro acpi=off
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
- BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 00000000bf790000 (usable)
- BIOS-e820: 00000000bf790000 - 00000000bf79e000 (ACPI data)
- BIOS-e820: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS)
- BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
- BIOS-e820: 00000000bf7ec000 - 00000000c0000000 (reserved)
- BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
- BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
- NX (Execute Disable) protection: active
- DMI present.
- DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./EVGA Classified SR-2, BIOS 080016 10/28/2010
- e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- No AGP bridge found
- last_pfn = 0x140000 max_arch_pfn = 0x400000000
- MTRR default type: uncachable
- MTRR fixed ranges enabled:
- 00000-9FFFF write-back
- A0000-BFFFF uncachable
- C0000-D7FFF write-protect
- D8000-DFFFF uncachable
- E0000-E3FFF write-protect
- E4000-E7FFF write-through
- E8000-EBFFF write-protect
- EC000-EFFFF write-through
- F0000-FFFFF write-protect
- MTRR variable ranges enabled:
- 0 base 0000000000 mask FF00000000 write-back
- 1 base 0100000000 mask FFC0000000 write-back
- 2 base 00C0000000 mask FFC0000000 uncachable
- 3 base 00BF800000 mask FFFF800000 uncachable
- 4 disabled
- 5 disabled
- 6 disabled
- 7 disabled
- 8 disabled
- 9 disabled
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
- last_pfn = 0xbf790 max_arch_pfn = 0x400000000
- found SMP MP-table at [ffff8800000ff780] ff780
- Scanning 0 areas for low memory corruption
- initial memory mapped : 0 - 20000000
- Using GB pages for direct mapping
- init_memory_mapping: 0000000000000000-00000000bf790000
- 0000000000 - 0080000000 page 1G
- 0080000000 - 00bf600000 page 2M
- 00bf600000 - 00bf790000 page 4k
- kernel direct mapping tables up to bf790000 @ 1fffd000-20000000
- init_memory_mapping: 0000000100000000-0000000140000000
- 0100000000 - 0140000000 page 1G
- kernel direct mapping tables up to 140000000 @ bf78f000-bf790000
- RAMDISK: 37246000 - 37ff0000
- [ffffea0000000000-ffffea00045fffff] PMD -> [ffff8800b0000000-ffff8800b37fffff] on node 0
- Zone PFN ranges:
- DMA 0x00000010 -> 0x00001000
- DMA32 0x00001000 -> 0x00100000
- Normal 0x00100000 -> 0x00140000
- Movable zone start PFN for each node
- early_node_map[3] active PFN ranges
- 0: 0x00000010 -> 0x0000009d
- 0: 0x00000100 -> 0x000bf790
- 0: 0x00100000 -> 0x00140000
- On node 0 totalpages: 1046301
- DMA zone: 56 pages used for memmap
- DMA zone: 6 pages reserved
- DMA zone: 3919 pages, LIFO batch:0
- DMA32 zone: 14280 pages used for memmap
- DMA32 zone: 765896 pages, LIFO batch:31
- Normal zone: 3584 pages used for memmap
- Normal zone: 258560 pages, LIFO batch:31
- SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
- Intel MultiProcessor Specification v1.4
- MPTABLE: OEM ID: INTEL
- MPTABLE: Product ID: TYLERSBURG
- MPTABLE: APIC at: 0xFEE00000
- Processor #32 (Bootup-CPU)
- Processor #34
- Processor #50
- Processor #52
- I/O APIC #2 Version 32 at 0xFEC00000.
- IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- I/O APIC #4 Version 32 at 0xFEC8A000.
- IOAPIC[1]: apic_id 4, version 32, address 0xfec8a000, GSI 24-47
- Processors: 4
- SMP: Allowing 4 CPUs, 0 hotplug CPUs
- nr_irqs_gsi: 64
- PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
- PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- PM: Registered nosave memory: 00000000bf790000 - 00000000bf79e000
- PM: Registered nosave memory: 00000000bf79e000 - 00000000bf7d0000
- PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000
- PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ec000
- PM: Registered nosave memory: 00000000bf7ec000 - 00000000c0000000
- PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
- PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
- PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
- PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
- Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
- Booting paravirtualized kernel on bare hardware
- setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
- PERCPU: Embedded 27 pages/cpu @ffff8800bf400000 s81664 r8192 d20736 u524288
- pcpu-alloc: s81664 r8192 d20736 u524288 alloc=1*2097152
- pcpu-alloc: [0] 0 1 2 3
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1028375
- Kernel command line: root=/dev/mapper/crypt-root cryptdevice=/dev/sda2:crypt ro acpi=off
- PID hash table entries: 4096 (order: 3, 32768 bytes)
- Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- Checking aperture...
- No AGP bridge found
- Calgary: detecting Calgary via BIOS EBDA area
- Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- Memory: 4032960k/5242880k available (3752k kernel code, 1057676k absent, 152244k reserved, 2001k data, 516k init)
- SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- Preemptable hierarchical RCU implementation.
- RCU-based detection of stalled CPUs is disabled.
- Verbose stalled-CPUs detection is disabled.
- NR_IRQS:2304
- Console: colour VGA+ 80x25
- console [tty0] enabled
- allocated 41943040 bytes of page_cgroup
- please try 'cgroup_disable=memory' option if you don't want memory cgroups
- Fast TSC calibration using PIT
- Detected 2396.670 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 4795.06 BogoMIPS (lpj=7988900)
- pid_max: default: 32768 minimum: 301
- Security Framework initialized
- AppArmor: AppArmor disabled by boot time parameter
- Mount-cache hash table entries: 256
- Initializing cgroup subsys ns
- ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
- Initializing cgroup subsys cpuacct
- Initializing cgroup subsys memory
- Initializing cgroup subsys devices
- Initializing cgroup subsys freezer
- Initializing cgroup subsys net_cls
- Initializing cgroup subsys blkio
- CPU: Physical Processor ID: 1
- CPU: Processor Core ID: 0
- mce: CPU supports 9 MCE banks
- CPU0: Thermal monitoring enabled (TM1)
- using mwait in idle threads.
- Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
- ... version: 3
- ... bit width: 48
- ... generic registers: 4
- ... value mask: 0000ffffffffffff
- ... max period: 000000007fffffff
- ... fixed-purpose events: 3
- ... event mask: 000000070000000f
- Setting APIC routing to flat
- ExtINT not setup in hardware but reported by MP table
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
- CPU0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
- NMI watchdog enabled, takes one hw-pmu counter.
- Booting Node 0, Processors #1
- NMI watchdog enabled, takes one hw-pmu counter.
- #2
- NMI watchdog enabled, takes one hw-pmu counter.
- #3 Ok.
- NMI watchdog enabled, takes one hw-pmu counter.
- Brought up 4 CPUs
- Total of 4 processors activated (19182.32 BogoMIPS).
- devtmpfs: initialized
- NET: Registered protocol family 16
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: Interpreter disabled.
- vgaarb: loaded
- PCI: Probing PCI hardware
- PCI: Probing PCI hardware (bus 00)
- pci 0000:00:00.0: [8086:3406] type 0 class 0x000600
- pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:00.0: PME# disabled
- pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
- pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:01.0: PME# disabled
- pci 0000:00:02.0: [8086:3409] type 1 class 0x000604
- pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:02.0: PME# disabled
- pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
- pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:03.0: PME# disabled
- pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
- pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:07.0: PME# disabled
- pci 0000:00:13.0: [8086:342d] type 0 class 0x000800
- pci 0000:00:13.0: reg 10: [mem 0xfec8a000-0xfec8afff]
- pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:13.0: PME# disabled
- pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
- pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
- pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
- pci 0000:00:14.3: [8086:3438] type 0 class 0x000800
- pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
- pci 0000:00:1a.0: reg 20: [io 0x9900-0x991f]
- pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
- pci 0000:00:1a.1: reg 20: [io 0x9980-0x999f]
- pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
- pci 0000:00:1a.2: reg 20: [io 0x9a00-0x9a1f]
- pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
- pci 0000:00:1a.7: reg 10: [mem 0xfb9f6000-0xfb9f63ff]
- pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
- pci 0000:00:1a.7: PME# disabled
- pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
- pci 0000:00:1b.0: reg 10: [mem 0xfb9f8000-0xfb9fbfff 64bit]
- pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1b.0: PME# disabled
- pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
- pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.0: PME# disabled
- pci 0000:00:1c.2: [8086:3a44] type 1 class 0x000604
- pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.2: PME# disabled
- pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
- pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.4: PME# disabled
- pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
- pci 0000:00:1d.0: reg 20: [io 0x9a80-0x9a9f]
- pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
- pci 0000:00:1d.1: reg 20: [io 0x9b00-0x9b1f]
- pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
- pci 0000:00:1d.2: reg 20: [io 0x9b80-0x9b9f]
- pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
- pci 0000:00:1d.7: reg 10: [mem 0xfb9fc000-0xfb9fc3ff]
- pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- pci 0000:00:1d.7: PME# disabled
- pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
- pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
- pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
- pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
- pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
- pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
- pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
- pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
- pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
- pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
- pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
- pci 0000:00:1f.2: reg 20: [io 0xffe0-0xffef]
- pci 0000:00:1f.2: reg 24: [io 0xfff0-0xffff]
- pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
- pci 0000:00:1f.3: reg 10: [mem 0xfb9fe000-0xfb9fe0ff 64bit]
- pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
- pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
- pci 0000:00:1f.5: reg 10: [io 0x9f80-0x9f87]
- pci 0000:00:1f.5: reg 14: [io 0x9f00-0x9f03]
- pci 0000:00:1f.5: reg 18: [io 0x9e80-0x9e87]
- pci 0000:00:1f.5: reg 1c: [io 0x9e00-0x9e03]
- pci 0000:00:1f.5: reg 20: [io 0x9d80-0x9d8f]
- pci 0000:00:1f.5: reg 24: [io 0x9d00-0x9d0f]
- pci 0000:0e:00.0: [1b4b:9123] type 0 class 0x000106
- pci 0000:0e:00.0: reg 10: [io 0xeb00-0xeb07]
- pci 0000:0e:00.0: reg 14: [io 0xea80-0xea83]
- pci 0000:0e:00.0: reg 18: [io 0xed00-0xed07]
- pci 0000:0e:00.0: reg 1c: [io 0xec00-0xec03]
- pci 0000:0e:00.0: reg 20: [io 0xeb80-0xeb8f]
- pci 0000:0e:00.0: reg 24: [mem 0xfbeef000-0xfbeef7ff]
- pci 0000:0e:00.0: reg 30: [mem 0xfbed0000-0xfbedffff pref]
- pci 0000:0e:00.0: PME# supported from D3hot
- pci 0000:0e:00.0: PME# disabled
- pci 0000:0e:00.1: [1b4b:91a4] type 0 class 0x000101
- pci 0000:0e:00.1: reg 10: [io 0xee00-0xee07]
- pci 0000:0e:00.1: reg 14: [io 0xed80-0xed83]
- pci 0000:0e:00.1: reg 18: [io 0xef80-0xef87]
- pci 0000:0e:00.1: reg 1c: [io 0xef00-0xef03]
- pci 0000:0e:00.1: reg 20: [io 0xee80-0xee8f]
- pci 0000:0e:00.1: reg 24: [mem 0xfbeefc00-0xfbeefc0f]
- pci 0000:0e:00.1: reg 30: [mem 0xfbef0000-0xfbefffff pref]
- pci 0000:0e:00.1: PME# supported from D3hot
- pci 0000:0e:00.1: PME# disabled
- pci 0000:00:01.0: PCI bridge to [bus 0e-0e]
- pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
- pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
- pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:0d:00.0: [1033:0194] type 0 class 0x000c03
- pci 0000:0d:00.0: reg 10: [mem 0xfbdfe000-0xfbdfffff 64bit]
- pci 0000:0d:00.0: PME# supported from D0 D3hot
- pci 0000:0d:00.0: PME# disabled
- pci 0000:00:02.0: PCI bridge to [bus 0d-0d]
- pci 0000:00:02.0: bridge window [io 0xf000-0x0000] (disabled)
- pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
- pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:09:00.0: [10de:05b1] type 1 class 0x000604
- pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
- pci 0000:09:00.0: PME# disabled
- pci 0000:00:03.0: PCI bridge to [bus 09-0c]
- pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
- pci 0000:00:03.0: bridge window [mem 0xd7f00000-0xdfffffff]
- pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
- pci 0000:0a:00.0: [10de:05b1] type 1 class 0x000604
- pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
- pci 0000:0a:00.0: PME# disabled
- pci 0000:0a:02.0: [10de:05b1] type 1 class 0x000604
- pci 0000:0a:02.0: PME# supported from D0 D3hot D3cold
- pci 0000:0a:02.0: PME# disabled
- pci 0000:09:00.0: PCI bridge to [bus 0a-0c]
- pci 0000:09:00.0: bridge window [io 0xd000-0xdfff]
- pci 0000:09:00.0: bridge window [mem 0xd7f00000-0xdfffffff]
- pci 0000:09:00.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
- pci 0000:0c:00.0: [1002:68b8] type 0 class 0x000300
- pci 0000:0c:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
- pci 0000:0c:00.0: reg 18: [mem 0xd8000000-0xd801ffff 64bit]
- pci 0000:0c:00.0: reg 20: [io 0xd000-0xd0ff]
- pci 0000:0c:00.0: reg 30: [mem 0xd7fe0000-0xd7ffffff pref]
- pci 0000:0c:00.0: supports D1 D2
- pci 0000:0c:00.1: [1002:aa58] type 0 class 0x000403
- pci 0000:0c:00.1: reg 10: [mem 0xdc000000-0xdc003fff 64bit]
- pci 0000:0c:00.1: supports D1 D2
- pci 0000:0a:00.0: PCI bridge to [bus 0c-0c]
- pci 0000:0a:00.0: bridge window [io 0xd000-0xdfff]
- pci 0000:0a:00.0: bridge window [mem 0xd7f00000-0xdfffffff]
- pci 0000:0a:00.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
- pci 0000:0a:02.0: PCI bridge to [bus 0b-0b]
- pci 0000:0a:02.0: bridge window [io 0xf000-0x0000] (disabled)
- pci 0000:0a:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:0a:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:05:00.0: [10de:05b1] type 1 class 0x000604
- pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
- pci 0000:05:00.0: PME# disabled
- pci 0000:00:07.0: PCI bridge to [bus 05-08]
- pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
- pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:06:00.0: [10de:05b1] type 1 class 0x000604
- pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
- pci 0000:06:00.0: PME# disabled
- pci 0000:06:02.0: [10de:05b1] type 1 class 0x000604
- pci 0000:06:02.0: PME# supported from D0 D3hot D3cold
- pci 0000:06:02.0: PME# disabled
- pci 0000:05:00.0: PCI bridge to [bus 06-08]
- pci 0000:05:00.0: bridge window [io 0xf000-0x0000] (disabled)
- pci 0000:05:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:05:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:06:00.0: PCI bridge to [bus 08-08]
- pci 0000:06:00.0: bridge window [io 0xf000-0x0000] (disabled)
- pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:06:02.0: PCI bridge to [bus 07-07]
- pci 0000:06:02.0: bridge window [io 0xf000-0x0000] (disabled)
- pci 0000:06:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:06:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:04:00.0: [197b:2363] type 0 class 0x000106
- pci 0000:04:00.0: reg 24: [mem 0xfbcee000-0xfbceffff]
- pci 0000:04:00.0: reg 30: [mem 0xfbcf0000-0xfbcfffff pref]
- pci 0000:04:00.0: PME# supported from D3hot
- pci 0000:04:00.0: PME# disabled
- pci 0000:04:00.1: [197b:2363] type 0 class 0x000101
- pci 0000:04:00.1: reg 10: [io 0xce00-0xce07]
- pci 0000:04:00.1: reg 14: [io 0xcd80-0xcd83]
- pci 0000:04:00.1: reg 18: [io 0xcf80-0xcf87]
- pci 0000:04:00.1: reg 1c: [io 0xcf00-0xcf03]
- pci 0000:04:00.1: reg 20: [io 0xce80-0xce8f]
- pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- pci 0000:00:1c.0: PCI bridge to [bus 04-04]
- pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
- pci 0000:00:1c.0: bridge window [mem 0xfbc00000-0xfbcfffff]
- pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:03:00.0: [11ab:4380] type 0 class 0x000200
- pci 0000:03:00.0: reg 10: [mem 0xfbbdc000-0xfbbdffff 64bit]
- pci 0000:03:00.0: reg 18: [io 0xbf00-0xbfff]
- pci 0000:03:00.0: reg 30: [mem 0xfbbe0000-0xfbbfffff pref]
- pci 0000:03:00.0: supports D1 D2
- pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:03:00.0: PME# disabled
- pci 0000:00:1c.2: PCI bridge to [bus 03-03]
- pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
- pci 0000:00:1c.2: bridge window [mem 0xfbb00000-0xfbbfffff]
- pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:02:00.0: [11ab:4380] type 0 class 0x000200
- pci 0000:02:00.0: reg 10: [mem 0xfbadc000-0xfbadffff 64bit]
- pci 0000:02:00.0: reg 18: [io 0xaf00-0xafff]
- pci 0000:02:00.0: reg 30: [mem 0xfbae0000-0xfbafffff pref]
- pci 0000:02:00.0: supports D1 D2
- pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:02:00.0: PME# disabled
- pci 0000:00:1c.4: PCI bridge to [bus 02-02]
- pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
- pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff]
- pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
- pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
- pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffffff] (subtractive decode)
- vgaarb: device added: PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none
- pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:3a16]
- PCI: pci_cache_line_size set to 64 bytes
- reserve RAM buffer: 000000000009d000 - 000000000009ffff
- reserve RAM buffer: 00000000bf790000 - 00000000bfffffff
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- hpet clockevent registered
- hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
- hpet0: 4 comparators, 64-bit 14.318180 MHz counter
- Switching to clocksource tsc
- pnp: PnP ACPI: disabled
- pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0000000-0xd01fffff 64bit pref]
- pci 0000:00:1c.2: BAR 15: assigned [mem 0xd0200000-0xd03fffff 64bit pref]
- pci 0000:00:1c.4: BAR 15: assigned [mem 0xd0400000-0xd05fffff 64bit pref]
- pci 0000:00:01.0: PCI bridge to [bus 0e-0e]
- pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
- pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
- pci 0000:00:01.0: bridge window [mem pref disabled]
- pci 0000:00:02.0: PCI bridge to [bus 0d-0d]
- pci 0000:00:02.0: bridge window [io disabled]
- pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
- pci 0000:00:02.0: bridge window [mem pref disabled]
- pci 0000:0a:00.0: PCI bridge to [bus 0c-0c]
- pci 0000:0a:00.0: bridge window [io 0xd000-0xdfff]
- pci 0000:0a:00.0: bridge window [mem 0xd7f00000-0xdfffffff]
- pci 0000:0a:00.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
- pci 0000:0a:02.0: PCI bridge to [bus 0b-0b]
- pci 0000:0a:02.0: bridge window [io disabled]
- pci 0000:0a:02.0: bridge window [mem disabled]
- pci 0000:0a:02.0: bridge window [mem pref disabled]
- pci 0000:09:00.0: PCI bridge to [bus 0a-0c]
- pci 0000:09:00.0: bridge window [io 0xd000-0xdfff]
- pci 0000:09:00.0: bridge window [mem 0xd7f00000-0xdfffffff]
- pci 0000:09:00.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
- pci 0000:00:03.0: PCI bridge to [bus 09-0c]
- pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
- pci 0000:00:03.0: bridge window [mem 0xd7f00000-0xdfffffff]
- pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
- pci 0000:06:00.0: PCI bridge to [bus 08-08]
- pci 0000:06:00.0: bridge window [io disabled]
- pci 0000:06:00.0: bridge window [mem disabled]
- pci 0000:06:00.0: bridge window [mem pref disabled]
- pci 0000:06:02.0: PCI bridge to [bus 07-07]
- pci 0000:06:02.0: bridge window [io disabled]
- pci 0000:06:02.0: bridge window [mem disabled]
- pci 0000:06:02.0: bridge window [mem pref disabled]
- pci 0000:05:00.0: PCI bridge to [bus 06-08]
- pci 0000:05:00.0: bridge window [io disabled]
- pci 0000:05:00.0: bridge window [mem disabled]
- pci 0000:05:00.0: bridge window [mem pref disabled]
- pci 0000:00:07.0: PCI bridge to [bus 05-08]
- pci 0000:00:07.0: bridge window [io disabled]
- pci 0000:00:07.0: bridge window [mem disabled]
- pci 0000:00:07.0: bridge window [mem pref disabled]
- pci 0000:00:1c.0: PCI bridge to [bus 04-04]
- pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
- pci 0000:00:1c.0: bridge window [mem 0xfbc00000-0xfbcfffff]
- pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
- pci 0000:00:1c.2: PCI bridge to [bus 03-03]
- pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
- pci 0000:00:1c.2: bridge window [mem 0xfbb00000-0xfbbfffff]
- pci 0000:00:1c.2: bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
- pci 0000:00:1c.4: PCI bridge to [bus 02-02]
- pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
- pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff]
- pci 0000:00:1c.4: bridge window [mem 0xd0400000-0xd05fffff 64bit pref]
- pci 0000:00:1e.0: PCI bridge to [bus 01-01]
- pci 0000:00:1e.0: bridge window [io disabled]
- pci 0000:00:1e.0: bridge window [mem disabled]
- pci 0000:00:1e.0: bridge window [mem pref disabled]
- pci 0000:00:01.0: setting latency timer to 64
- pci 0000:00:02.0: setting latency timer to 64
- pci 0000:00:03.0: setting latency timer to 64
- pci 0000:09:00.0: setting latency timer to 64
- pci 0000:0a:00.0: setting latency timer to 64
- pci 0000:0a:02.0: setting latency timer to 64
- pci 0000:00:07.0: setting latency timer to 64
- pci 0000:05:00.0: setting latency timer to 64
- pci 0000:06:00.0: setting latency timer to 64
- pci 0000:06:02.0: setting latency timer to 64
- pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 17
- pci 0000:00:1c.0: setting latency timer to 64
- pci 0000:00:1c.2: PCI->APIC IRQ transform: INT C -> IRQ 18
- pci 0000:00:1c.2: setting latency timer to 64
- pci 0000:00:1c.4: PCI->APIC IRQ transform: INT A -> IRQ 17
- pci 0000:00:1c.4: setting latency timer to 64
- pci 0000:00:1e.0: setting latency timer to 64
- pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
- pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffff]
- pci_bus 0000:0e: resource 0 [io 0xe000-0xefff]
- pci_bus 0000:0e: resource 1 [mem 0xfbe00000-0xfbefffff]
- pci_bus 0000:0d: resource 1 [mem 0xfbd00000-0xfbdfffff]
- pci_bus 0000:09: resource 0 [io 0xd000-0xdfff]
- pci_bus 0000:09: resource 1 [mem 0xd7f00000-0xdfffffff]
- pci_bus 0000:09: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
- pci_bus 0000:0a: resource 0 [io 0xd000-0xdfff]
- pci_bus 0000:0a: resource 1 [mem 0xd7f00000-0xdfffffff]
- pci_bus 0000:0a: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
- pci_bus 0000:0c: resource 0 [io 0xd000-0xdfff]
- pci_bus 0000:0c: resource 1 [mem 0xd7f00000-0xdfffffff]
- pci_bus 0000:0c: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
- pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
- pci_bus 0000:04: resource 1 [mem 0xfbc00000-0xfbcfffff]
- pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref]
- pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
- pci_bus 0000:03: resource 1 [mem 0xfbb00000-0xfbbfffff]
- pci_bus 0000:03: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref]
- pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
- pci_bus 0000:02: resource 1 [mem 0xfba00000-0xfbafffff]
- pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref]
- pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
- pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffffff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 262144 bind 65536)
- TCP reno registered
- UDP hash table entries: 2048 (order: 4, 65536 bytes)
- UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- NET: Registered protocol family 1
- pci 0000:0c:00.0: Boot video device
- PCI: CLS 256 bytes, default 64
- Unpacking initramfs...
- Freeing initrd memory: 13992k freed
- PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- Placing 64MB software IO TLB between ffff8800bad8d000 - ffff8800bed8d000
- software IO TLB at phys 0xbad8d000 - 0xbed8d000
- platform rtc_cmos: registered platform RTC device (no PNP device found)
- Scanning for low memory corruption every 60 seconds
- audit: initializing netlink socket (disabled)
- type=2000 audit(1288305369.003:1): initialized
- HugeTLB registered 2 MB page size, pre-allocated 0 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- msgmni has been set to 7904
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- pcieport 0000:00:01.0: setting latency timer to 64
- pcieport 0000:00:01.0: irq 64 for MSI/MSI-X
- pcieport 0000:00:02.0: setting latency timer to 64
- pcieport 0000:00:02.0: irq 65 for MSI/MSI-X
- pcieport 0000:00:03.0: setting latency timer to 64
- pcieport 0000:00:03.0: irq 66 for MSI/MSI-X
- pcieport 0000:00:07.0: setting latency timer to 64
- pcieport 0000:00:07.0: irq 67 for MSI/MSI-X
- pcieport 0000:00:1c.0: setting latency timer to 64
- pcieport 0000:00:1c.0: irq 68 for MSI/MSI-X
- pcieport 0000:00:1c.2: setting latency timer to 64
- pcieport 0000:00:1c.2: irq 69 for MSI/MSI-X
- pcieport 0000:00:1c.4: setting latency timer to 64
- pcieport 0000:00:1c.4: irq 70 for MSI/MSI-X
- pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
- pci 0000:0e:00.0: Signaling PME through PCIe PME interrupt
- pci 0000:0e:00.1: Signaling PME through PCIe PME interrupt
- pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
- pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
- pci 0000:0d:00.0: Signaling PME through PCIe PME interrupt
- pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
- pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
- pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
- pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
- pci 0000:0c:00.0: Signaling PME through PCIe PME interrupt
- pci 0000:0c:00.1: Signaling PME through PCIe PME interrupt
- pci 0000:0a:02.0: Signaling PME through PCIe PME interrupt
- pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
- pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
- pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
- pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
- pci 0000:06:02.0: Signaling PME through PCIe PME interrupt
- pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
- pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
- pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
- pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
- pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
- pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
- pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
- pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
- pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
- pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
- pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
- intel_idle: MWAIT substates: 0x1120
- intel_idle: v0.4 model 0x2C
- intel_idle: lapic_timer_reliable_states 0xffffffff
- Linux agpgart interface v0.103
- Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- PNP: No PS/2 controller found. Probing ports directly.
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
- rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
- cpuidle: using governor ladder
- cpuidle: using governor menu
- TCP cubic registered
- NET: Registered protocol family 17
- Registering the dns_resolver key type
- PM: Hibernation image not present or could not be loaded.
- registered taskstats version 1
- rtc_cmos rtc_cmos: setting system clock to 2010-10-28 22:36:09 UTC (1288305369)
- Initalizing network drop monitor service
- Freeing unused kernel memory: 516k freed
- udev[41]: starting version 166
- [drm] Initialized drm 1.1.0 20060810
- [drm] radeon defaulting to kernel modesetting.
- [drm] radeon kernel modesetting enabled.
- radeon 0000:0c:00.0: PCI->APIC IRQ transform: INT A -> IRQ 24
- radeon 0000:0c:00.0: setting latency timer to 64
- [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8).
- [drm] register mmio base: 0xD8000000
- [drm] register mmio size: 131072
- ATOM BIOS: JUNIPER
- radeon 0000:0c:00.0: GPU softreset
- radeon 0000:0c:00.0: GRBM_STATUS=0x00003828
- radeon 0000:0c:00.0: GRBM_STATUS_SE0=0x00000007
- radeon 0000:0c:00.0: GRBM_STATUS_SE1=0x00000007
- radeon 0000:0c:00.0: SRBM_STATUS=0x200000C0
- radeon 0000:0c:00.0: GRBM_SOFT_RESET=0x00007F6B
- radeon 0000:0c:00.0: GRBM_STATUS=0x00003828
- radeon 0000:0c:00.0: GRBM_STATUS_SE0=0x00000007
- radeon 0000:0c:00.0: GRBM_STATUS_SE1=0x00000007
- radeon 0000:0c:00.0: SRBM_STATUS=0x200000C0
- radeon 0000:0c:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
- radeon 0000:0c:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
- mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
- [drm] Detected VRAM RAM=1024M, BAR=256M
- [drm] RAM width 128bits DDR
- [TTM] Zone kernel: Available graphics memory: 2023734 kiB.
- [TTM] Initializing pool allocator.
- [drm] radeon: 1024M of VRAM memory ready
- [drm] radeon: 512M of GTT memory ready.
- radeon 0000:0c:00.0: irq 71 for MSI/MSI-X
- radeon 0000:0c:00.0: radeon: using MSI.
- [drm] radeon: irq initialized.
- [drm] GART: num cpu pages 131072, num gpu pages 131072
- [drm] Loading JUNIPER Microcode
- radeon 0000:0c:00.0: WB enabled
- [drm] ring test succeeded in 1 usecs
- [drm] radeon: ib pool ready.
- [drm] ib test succeeded in 0 usecs
- failed to evaluate ATIF got AE_BAD_PARAMETER
- [drm] Radeon Display Connectors
- [drm] Connector 0:
- [drm] DisplayPort
- [drm] HPD4
- [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
- [drm] Encoders:
- [drm] DFP1: INTERNAL_UNIPHY2
- [drm] Connector 1:
- [drm] HDMI-A
- [drm] HPD5
- [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
- [drm] Encoders:
- [drm] DFP2: INTERNAL_UNIPHY2
- [drm] Connector 2:
- [drm] DVI-I
- [drm] HPD1
- [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
- [drm] Encoders:
- [drm] DFP3: INTERNAL_UNIPHY1
- [drm] CRT2: INTERNAL_KLDSCP_DAC2
- [drm] Connector 3:
- [drm] DVI-I
- [drm] HPD6
- [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
- [drm] Encoders:
- [drm] DFP4: INTERNAL_UNIPHY
- [drm] CRT1: INTERNAL_KLDSCP_DAC1
- [drm] Internal thermal controller with fan control
- [drm] radeon: power management initialized
- [drm] fb mappable at 0xC0141000
- [drm] vram apper at 0xC0000000
- [drm] size 5763072
- [drm] fb depth is 24
- [drm] pitch is 6400
- Console: switching to colour frame buffer device 200x56
- fb0: radeondrmfb frame buffer device
- drm: registered panic notifier
- [drm] Initialized radeon 2.7.0 20080528 for 0000:0c:00.0 on minor 0
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- libata version 3.00 loaded.
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_hcd 0000:00:1a.7: PCI->APIC IRQ transform: INT C -> IRQ 18
- ehci_hcd 0000:00:1a.7: setting latency timer to 64
- ehci_hcd 0000:00:1a.7: EHCI Host Controller
- ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:1a.7: debug port 1
- xhci_hcd 0000:0d:00.0: PCI->APIC IRQ transform: INT A -> IRQ 29
- xhci_hcd 0000:0d:00.0: setting latency timer to 64
- xhci_hcd 0000:0d:00.0: xHCI Host Controller
- xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 2
- ahci 0000:0e:00.0: version 3.0
- ahci 0000:0e:00.0: PCI->APIC IRQ transform: INT A -> IRQ 28
- ahci 0000:0e:00.0: irq 72 for MSI/MSI-X
- ahci 0000:0e:00.0: controller can do FBS, turning on CAP_FBS
- ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
- ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb9f6000
- uhci_hcd: USB Universal Host Controller Interface driver
- pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
- pata_jmicron 0000:04:00.1: PCI->APIC IRQ transform: INT B -> IRQ 16
- pata_jmicron 0000:04:00.1: setting latency timer to 64
- scsi0 : pata_jmicron
- scsi1 : pata_jmicron
- ata1: PATA max UDMA/100 cmd 0xce00 ctl 0xcd80 bmdma 0xce80 irq 16
- ata2: PATA max UDMA/100 cmd 0xcf80 ctl 0xcf00 bmdma 0xce88 irq 16
- ahci 0000:0e:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
- ahci 0000:0e:00.0: flags: 64bit ncq fbs pio
- ahci 0000:0e:00.0: setting latency timer to 64
- xhci_hcd 0000:0d:00.0: irq 29, io mem 0xfbdfe000
- xhci_hcd 0000:0d:00.0: irq 73 for MSI/MSI-X
- xhci_hcd 0000:0d:00.0: irq 74 for MSI/MSI-X
- xhci_hcd 0000:0d:00.0: irq 75 for MSI/MSI-X
- xhci_hcd 0000:0d:00.0: irq 76 for MSI/MSI-X
- xhci_hcd 0000:0d:00.0: irq 77 for MSI/MSI-X
- scsi2 : ahci
- scsi3 : ahci
- scsi4 : ahci
- ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 6 ports detected
- usb usb2: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
- ehci_hcd 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23
- ehci_hcd 0000:00:1d.7: setting latency timer to 64
- ehci_hcd 0000:00:1d.7: EHCI Host Controller
- xHCI xhci_add_endpoint called for root hub
- xHCI xhci_check_bandwidth called for root hub
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 4 ports detected
- ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
- scsi5 : ahci
- scsi6 : ahci
- scsi7 : ahci
- scsi8 : ahci
- scsi9 : ahci
- ata3: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef100 irq 72
- ata4: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef180 irq 72
- ata5: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef200 irq 72
- ata6: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef280 irq 72
- ata7: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef300 irq 72
- ata8: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef380 irq 72
- ata9: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef400 irq 72
- ata10: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef480 irq 72
- ehci_hcd 0000:00:1d.7: debug port 1
- ahci 0000:04:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
- ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
- ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb9fc000
- ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
- ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
- ahci 0000:04:00.0: setting latency timer to 64
- scsi10 : ahci
- ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 6 ports detected
- uhci_hcd 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16
- uhci_hcd 0000:00:1a.0: setting latency timer to 64
- uhci_hcd 0000:00:1a.0: UHCI Host Controller
- uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 4
- scsi11 : ahci
- ata11: SATA max UDMA/133 abar m8192@0xfbcee000 port 0xfbcee100 irq 16
- ata12: SATA max UDMA/133 abar m8192@0xfbcee000 port 0xfbcee180 irq 16
- uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009900
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1a.1: PCI->APIC IRQ transform: INT B -> IRQ 21
- uhci_hcd 0000:00:1a.1: setting latency timer to 64
- uhci_hcd 0000:00:1a.1: UHCI Host Controller
- uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 5
- uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009980
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1a.2: PCI->APIC IRQ transform: INT D -> IRQ 19
- uhci_hcd 0000:00:1a.2: setting latency timer to 64
- uhci_hcd 0000:00:1a.2: UHCI Host Controller
- uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 6
- uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009a00
- hub 6-0:1.0: USB hub found
- hub 6-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
- uhci_hcd 0000:00:1d.0: setting latency timer to 64
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 7
- ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009a80
- hub 7-0:1.0: USB hub found
- hub 7-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
- uhci_hcd 0000:00:1d.1: setting latency timer to 64
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 8
- ata12: SATA link down (SStatus 0 SControl 300)
- ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata8: SATA link down (SStatus 0 SControl 300)
- ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata9: SATA link down (SStatus 0 SControl 300)
- ata5: SATA link down (SStatus 0 SControl 300)
- ata7: SATA link down (SStatus 0 SControl 300)
- ata6: SATA link down (SStatus 0 SControl 300)
- ata10.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
- ata4.00: ATA-8: ST3500620AS, HP26, max UDMA/100
- ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- ata10.00: configured for UDMA/66
- ata3.00: ATA-8: OCZ-ONYX, 1.6, max UDMA/133
- ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
- uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009b00
- ata4.00: configured for UDMA/100
- ata3.00: configured for UDMA/133
- hub 8-0:1.0: USB hub found
- hub 8-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18
- uhci_hcd 0000:00:1d.2: setting latency timer to 64
- uhci_hcd 0000:00:1d.2: UHCI Host Controller
- uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 9
- scsi 2:0:0:0: Direct-Access ATA OCZ-ONYX 1.6 PQ: 0 ANSI: 5
- scsi 3:0:0:0: Direct-Access ATA ST3500620AS HP26 PQ: 0 ANSI: 5
- uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009b80
- hub 9-0:1.0: USB hub found
- hub 9-0:1.0: 2 ports detected
- pata_acpi 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19
- pata_acpi 0000:00:1f.2: setting latency timer to 64
- pata_acpi 0000:00:1f.5: PCI->APIC IRQ transform: INT B -> IRQ 19
- pata_acpi 0000:00:1f.5: setting latency timer to 64
- pata_acpi 0000:0e:00.1: PCI->APIC IRQ transform: INT B -> IRQ 40
- pata_acpi 0000:0e:00.1: setting latency timer to 64
- ata_piix 0000:00:1f.2: version 2.13
- ata_piix 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19
- ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
- ata_piix 0000:00:1f.2: setting latency timer to 64
- scsi12 : ata_piix
- scsi13 : ata_piix
- ata13: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffe0 irq 14
- ata14: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffe8 irq 15
- ata_piix 0000:00:1f.5: PCI->APIC IRQ transform: INT B -> IRQ 19
- ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
- ata_piix 0000:00:1f.5: setting latency timer to 64
- scsi14 : ata_piix
- scsi15 : ata_piix
- ata15: SATA max UDMA/133 cmd 0x9f80 ctl 0x9f00 bmdma 0x9d80 irq 19
- ata16: SATA max UDMA/133 cmd 0x9e80 ctl 0x9e00 bmdma 0x9d88 irq 19
- scsi 9:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
- ata11: SATA link down (SStatus 0 SControl 300)
- ata16: SATA link down (SStatus 0 SControl 300)
- ata15: SATA link down (SStatus 0 SControl 300)
- usb 5-1: new full speed USB device using uhci_hcd and address 2
- input: Razer Razer Lycosa as /devices/pci0000:00/0000:00:1a.1/usb5/5-1/5-1:1.0/input/input0
- generic-usb 0003:1532:0109.0001: input,hidraw0: USB HID v1.10 Keyboard [Razer Razer Lycosa] on usb-0000:00:1a.1-1/input0
- input: Razer Razer Lycosa as /devices/pci0000:00/0000:00:1a.1/usb5/5-1/5-1:1.1/input/input1
- generic-usb 0003:1532:0109.0002: input,hidraw1: USB HID v1.10 Device [Razer Razer Lycosa] on usb-0000:00:1a.1-1/input1
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- ata14.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata14.01: SATA link down (SStatus 0 SControl 300)
- ata13.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- ata13.01: SATA link down (SStatus 0 SControl 300)
- ata13.01: link offline, clearing class 3 to NONE
- ata14.00: HPA detected: current 3907027055, native 3907029168
- ata14.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133
- ata14.00: 3907027055 sectors, multi 16: LBA48 NCQ (depth 0/32)
- ata13.00: ATAPI: HL-DT-ST DVDRAM_GSA-H60N, CA01, max UDMA/100
- ata13.00: configured for UDMA/100
- ata14.00: configured for UDMA/133
- usb 6-2: new full speed USB device using uhci_hcd and address 2
- scsi 12:0:0:0: CD-ROM HL-DT-ST DVDRAM_GSA-H60N CA01 PQ: 0 ANSI: 5
- scsi 13:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
- sd 2:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
- sd 13:0:0:0: [sdc] 3907027055 512-byte logical blocks: (2.00 TB/1.81 TiB)
- sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- sd 13:0:0:0: [sdc] Write Protect is off
- sd 13:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- sd 3:0:0:0: [sdb] Write Protect is off
- sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sd 13:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sdc: sdc1
- sd 2:0:0:0: Attached scsi generic sg0 type 0
- sd 3:0:0:0: Attached scsi generic sg1 type 0
- scsi 9:0:0:0: Attached scsi generic sg2 type 3
- sr 12:0:0:0: Attached scsi generic sg3 type 5
- sd 13:0:0:0: Attached scsi generic sg4 type 0
- sdb: sdb1 sdb2
- sd 2:0:0:0: [sda] Write Protect is off
- sd 13:0:0:0: [sdc] Attached SCSI disk
- sd 3:0:0:0: [sdb] Attached SCSI disk
- sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2
- sd 2:0:0:0: [sda] Attached SCSI disk
- input: Razer Razer Mamba as /devices/pci0000:00/0000:00:1a.2/usb6/6-2/6-2:1.0/input/input2
- generic-usb 0003:1532:000A.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer Mamba] on usb-0000:00:1a.2-2/input0
- input: Razer Razer Mamba as /devices/pci0000:00/0000:00:1a.2/usb6/6-2/6-2:1.1/input/input3
- generic-usb 0003:1532:000A.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer Mamba] on usb-0000:00:1a.2-2/input1
- sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
- cdrom: Uniform CD-ROM driver Revision: 3.20
- sr 12:0:0:0: Attached scsi CD-ROM sr0
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
- padlock: VIA PadLock not detected.
- EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
- udev[722]: starting version 166
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- EDAC MC: Ver: 2.1.0 Feb 18 2011
- shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- EDAC i7core: Driver loaded.
- Uniform Multi-Platform E-IDE driver
- sky2: driver version 1.28
- sky2 0000:03:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18
- sky2 0000:03:00.0: setting latency timer to 64
- sky2 0000:03:00.0: Yukon-2 UL 2 chip revision 0
- sky2 0000:03:00.0: irq 78 for MSI/MSI-X
- sky2 0000:03:00.0: eth0: addr 00:1f:bc:02:b0:ee
- sky2 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
- sky2 0000:02:00.0: setting latency timer to 64
- sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
- sky2 0000:02:00.0: irq 79 for MSI/MSI-X
- i801_smbus 0000:00:1f.3: PCI->APIC IRQ transform: INT C -> IRQ 18
- iTCO_vendor_support: vendor-support=0
- sky2 0000:02:00.0: eth1: addr 00:1f:bc:02:b0:ef
- iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
- iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
- input: PC Speaker as /devices/platform/pcspkr/input/input4
- HDA Intel 0000:00:1b.0: PCI->APIC IRQ transform: INT A -> IRQ 22
- HDA Intel 0000:00:1b.0: irq 80 for MSI/MSI-X
- HDA Intel 0000:00:1b.0: setting latency timer to 64
- hda_codec: ALC889: BIOS auto-probing.
- input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
- HDA Intel 0000:0c:00.1: PCI->APIC IRQ transform: INT B -> IRQ 34
- HDA Intel 0000:0c:00.1: irq 81 for MSI/MSI-X
- HDA Intel 0000:0c:00.1: setting latency timer to 64
- EXT4-fs (dm-1): re-mounted. Opts: (null)
- EXT4-fs (dm-1): re-mounted. Opts: (null)
- EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
- EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
- EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
- EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
- EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
- Adding 1048572k swap on /dev/mapper/crypt-swap. Priority:-1 extents:1 across:1048572k
- sky2 0000:03:00.0: eth0: enabling interface
- sky2 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
- NET: Registered protocol family 10
- lo: Disabled Privacy Extensions
- eth0: no IPv6 routers present
- start_kdeinit (1550): /proc/1550/oom_adj is deprecated, please use /proc/1550/oom_score_adj instead.
- fuse init (API version 7.15)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement