Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2015.01 (Jan 24 2015 - 18:35:39) Arch Linux ARM
- CPU: Freescale i.MX6Q rev1.2 at 792 MHz
- Reset cause: POR
- Board: Udoo
- DRAM: 1 GiB
- MMC: FSL_SDHC: 0
- *** Warning - bad CRC, using default environment
- In: serial
- Out: serial
- Err: serial
- Net: using phy at 6
- FEC [PRIME]
- Hit any key to stop autoboot: 0
- switch to partitions #0, OK
- mmc0 is current device
- SD/MMC found on device 0
- Checking for: /boot/uEnv.txt ...
- 5822240 bytes read in 313 ms (17.7 MiB/s)
- loading /boot/dtbs/imx6q-udoo.dtb ...
- 34828 bytes read in 1395 ms (23.4 KiB/s)
- ** File not found /boot/initramfs-linux.img **
- Kernel image @ 0x12000000 [ 0x000000 - 0x58d720 ]
- ## Flattened Device Tree blob at 18000000
- Booting using the fdt blob at 0x18000000
- Using Device Tree in place at 18000000, end 1800b80b
- Starting kernel ...
- Booting Linux on physical CPU 0x0
- Linux version 4.0.0 (root@h4) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #9 SMP Thu May 28 11:58:25 CEST 2015
- CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
- CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- Machine model: Udoo i.MX6 Quad Board
- cma: Reserved 256 MiB at 0x40000000
- Memory policy: Data cache writealloc
- PERCPU: Embedded 11 pages/cpu @af731000 s12480 r8192 d24384 u45056
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
- Kernel command line: console=ttymxc1,115200 root=/dev/mmcblk0p1 rw rootwait video=
- PID hash table entries: 4096 (order: 2, 16384 bytes)
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Memory: 765760K/1048576K available (7328K kernel code, 390K rwdata, 2324K rodata, 336K init, 438K bss, 20672K reserved, 262144K cma-reserved, 0K highmem)
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- vmalloc : 0xc0800000 - 0xff000000 (1000 MB)
- lowmem : 0x80000000 - 0xc0000000 (1024 MB)
- pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
- modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
- .text : 0x80008000 - 0x80975588 (9654 kB)
- .init : 0x80976000 - 0x809ca000 ( 336 kB)
- .data : 0x809ca000 - 0x80a2b860 ( 391 kB)
- .bss : 0x80a2b860 - 0x80a992d8 ( 439 kB)
- SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- Hierarchical RCU implementation.
- NR_IRQS:16 nr_irqs:16 16
- L2C-310 erratum 769419 enabled
- L2C-310 enabling early BRESP for Cortex-A9
- L2C-310 full line of zeros enabled for Cortex-A9
- L2C-310 ID prefetch enabled, offset 1 lines
- L2C-310 dynamic clock gating enabled, standby mode enabled
- L2C-310 cache controller enabled, 16 ways, 1024 kB
- L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76070001
- VPU 352M is enabled!
- Switching to timer-based delay loop, resolution 333ns
- sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns
- Console: colour dummy device 80x30
- Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- Initializing cgroup subsys net_cls
- CPU: Testing write buffer coherency: ok
- CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- Setting up static identity map for 0x106f7c30 - 0x106f7c88
- CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- Brought up 4 CPUs
- SMP: Total of 4 processors activated (24.00 BogoMIPS).
- CPU: All CPU(s) started in SVC mode.
- devtmpfs: initialized
- VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- pinctrl core: initialized pinctrl subsystem
- NET: Registered protocol family 16
- DMA: preallocated 256 KiB pool for atomic coherent allocations
- cpuidle: using governor ladder
- cpuidle: using governor menu
- CPU identified as i.MX6Q, silicon rev 1.2
- hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- hw-breakpoint: maximum watchpoint size is 4 bytes.
- imx6q-pinctrl 20e0000.iomuxc: no fsl,pins property in node /soc/aips-bus@02000000/iomuxc@020e0000/imx6q-udoo/pwm4grp
- imx6q-pinctrl 20e0000.iomuxc: no fsl,pins property in node /soc/aips-bus@02000000/iomuxc@020e0000/imx6q-udoo/pwm3grp
- imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
- mxs-dma 110000.dma-apbh: initialized
- vgaarb: loaded
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- 2000000.aips-bus:usbphy_nop1 supply vcc not found, using dummy regulator
- 2000000.aips-bus:usbphy_nop2 supply vcc not found, using dummy regulator
- i2c i2c-0: IMX I2C adapter registered
- i2c i2c-0: can't use DMA
- i2c i2c-1: IMX I2C adapter registered
- i2c i2c-1: can't use DMA
- i2c i2c-2: IMX I2C adapter registered
- i2c i2c-2: can't use DMA
- media: Linux media interface: v0.10
- Linux video capture interface: v2.00
- pps_core: LinuxPPS API ver. 1 registered
- pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- PTP clock support registered
- imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
- imx-ipuv3 2800000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
- mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 driver probed
- mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 dphy version is 0x3130302a
- MIPI CSI2 driver module loaded
- Advanced Linux Sound Architecture Driver Initialized.
- cfg80211: Calling CRDA to update world regulatory domain
- Switched to clocksource mxc_timer1
- FS-Cache: Loaded
- CacheFiles: Loaded
- NET: Registered protocol family 2
- TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- TCP: Hash tables configured (established 8192 bind 8192)
- TCP: reno registered
- UDP hash table entries: 512 (order: 2, 16384 bytes)
- UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- NET: Registered protocol family 1
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
- futex hash table entries: 1024 (order: 4, 65536 bytes)
- Initialise system trusted keyring
- zpool: loaded
- zbud: loaded
- VFS: Disk quotas dquot_6.5.2
- VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- FS-Cache: Netfs 'nfs' registered for caching
- NFS: Registering the id_resolver key type
- Key type id_resolver registered
- Key type id_legacy registered
- nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- fuse init (API version 7.23)
- ceph: loaded (mds proto 32)
- Key type asymmetric registered
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- imx-weim 21b8000.weim: Driver registered.
- MIPI DSI driver module loaded
- mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0xa:0xa0:0xc1
- mxc_sdc_fb fb@0: registered mxc display driver hdmi
- Console: switching to colour frame buffer device 80x30
- imx-sdma 20ec000.sdma: loaded firmware 1.1
- imx-sdma 20ec000.sdma: initialized
- 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 296, base_baud = 5000000) is a IMX
- console [ttymxc1] enabled
- 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 297, base_baud = 5000000) is a IMX
- [drm] Initialized drm 1.1.0 20060810
- [drm] Initialized vivante 1.0.4 20120216 on minor 0
- brd: module loaded
- loop: module loaded
- ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024
- ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480
- ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000
- ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
- ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
- ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
- ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
- scsi host0: ahci-imx
- ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 307
- Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
- tun: Universal TUN/TAP device driver, 1.6
- tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- vcan: Virtual CAN interface driver
- CAN device driver interface
- flexcan 2090000.flexcan: device registered (reg_base=c0ac0000, irq=31)
- 2188000.ethernet supply phy not found, using dummy regulator
- pps pps0: new PPS source ptp0
- libphy: fec_enet_mii_bus: probed
- fec 2188000.ethernet eth0: registered PHC device 0
- mac80211_hwsim: initializing netlink
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci-pci: EHCI PCI platform driver
- ehci-mxc: Freescale On-Chip EHCI Host driver
- usbcore: registered new interface driver usb-storage
- ci_hdrc ci_hdrc.1: doesn't support gadget
- ci_hdrc ci_hdrc.1: EHCI Host Controller
- ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
- ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- mousedev: PS/2 mouse device common for all mice
- snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc0
- i2c /dev entries driver
- IR NEC protocol handler initialized
- IR RC5(x/sz) protocol handler initialized
- IR RC6 protocol handler initialized
- IR JVC protocol handler initialized
- IR Sony protocol handler initialized
- IR SANYO protocol handler initialized
- IR Sharp protocol handler initialized
- IR MCE Keyboard/mouse protocol handler initialized
- IR XMP protocol handler initialized
- mxc_v4l2_output v4l2_out: V4L2 device registered as video16
- mxc_v4l2_output v4l2_out: V4L2 device registered as video17
- usbcore: registered new interface driver usbtv
- Driver for 1-wire Dallas network protocol.
- udoo_power_off_probe: ok
- platform 2000000.aips-bus:tempmon: Driver imx_thermal requests probe deferral
- imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com
- Driver 'mmcblk' needs updating - please use bus_type methods
- sdhci: Secure Digital Host Controller Interface driver
- sdhci: Copyright(c) Pierre Ossman
- sdhci-pltfm: SDHCI platform and OF driver helper
- sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
- sdhci-esdhc-imx 2198000.usdhc: No vmmc regulator found
- sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found
- mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
- Galcore version 5.0.11.25762
- ata1: SATA link down (SStatus 0 SControl 300)
- ahci-imx 2200000.sata: no device found, disabling link.
- ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug
- mmc0: host does not support reading read-only switch, assuming write-enable
- mmc0: new high speed SDHC card at address e624
- mmcblk0: mmc0:e624 SU16G 14.8 GiB
- mmcblk0: p1
- imx-ipuv3 2400000.ipu: WARNING: adapt panel end blank lines
- mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
- mxc_vpu 2040000.vpu: VPU initialized
- mxc_hdmi_cec soc:hdmi_cec@00120000: HDMI CEC initialized
- usb 1-1: new high-speed USB device number 2 using ci_hdrc
- caam 2100000.caam: Instantiated RNG4 SH0
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 4 ports detected
- caam 2100000.caam: Instantiated RNG4 SH1
- caam 2100000.caam: device ID = 0x0a160100 (Era 4)
- caam 2100000.caam: job rings = 2, qi = 0
- caam algorithms registered in /proc/crypto
- caam_jr 2101000.jr0: registering rng-caam
- snvs-secvio 20cc000.caam-snvs: violation handlers armed - non-secure state
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- fsl-asrc 2034000.asrc: driver registered
- imx-audio-hdmi sound-hdmi: hdmi-hifi <-> soc:hdmi_audio@00120000 mapping ok
- nf_conntrack version 0.5.0 (16061 buckets, 64244 max)
- arp_tables: (C) 2002 David S. Miller
- usb 1-1.3: new high-speed USB device number 3 using ci_hdrc
- TCP: cubic registered
- NET: Registered protocol family 10
- sit: IPv6 over IPv4 tunneling driver
- NET: Registered protocol family 17
- bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
- Bridge firewalling registered
- Ebtables v2.0 registered
- can: controller area network core (rev 20120528 abi 9)
- NET: Registered protocol family 29
- can: raw protocol (rev 20120528)
- can: broadcast manager protocol (rev 20120528 t)
- can: netlink gateway (rev 20130117) max_hops=1
- 8021q: 802.1Q VLAN Support v1.8
- Key type dns_resolver registered
- Key type ceph registered
- libceph: loaded (mon/osd proto 15/24)
- Registering SWP/SWPB emulation handler
- Loading compiled-in X.509 certificates
- snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 1970-01-01 00:12:19 UTC (739)
- sensor-SUPPLY: disabling
- 8962-SUPPLY: disabling
- usb_otg_vbus: disabling
- ALSA device list:
- #0: imx-hdmi-soc
- usb 1-1.4: new full-speed USB device number 4 using ci_hdrc
- EXT4-fs (mmcblk0p1): recovery complete
- EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
- VFS: Mounted root (ext4 filesystem) on device 179:1.
- devtmpfs: mounted
- Freeing unused kernel memory: 336K (80976000 - 809ca000)
- usb 1-1.4: device descriptor read/64, error -32
- usb 1-1.4: device descriptor read/64, error -32
- random: systemd urandom read with 42 bits of entropy available
- systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
- systemd[1]: Detected architecture 'arm'.
- Welcome to Arch Linux ARM!
- systemd[1]: Set hostname to <alarm>.
- usb 1-1.4: new full-speed USB device number 5 using ci_hdrc
- usb 1-1.4: device descriptor read/64, error -32
- usb 1-1.4: device descriptor read/64, error -32
- systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
- systemd[1]: Starting Swap.
- [ OK ] Reached target Swap.
- systemd[1]: Reached target Swap.
- systemd[1]: Expecting device dev-ttymxc1.device...
- Expecting device dev-ttymxc1.device...
- systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
- systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- systemd[1]: Starting Encrypted Volumes.
- [ OK ] Reached target Encrypted Volumes.
- systemd[1]: Reached target Encrypted Volumes.
- systemd[1]: Starting Remote File Systems.
- [ OK ] Reached target Remote File Systems.
- systemd[1]: Reached target Remote File Systems.
- systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
- systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- systemd[1]: Starting Paths.
- [ OK ] Reached target Paths.
- systemd[1]: Reached target Paths.
- usb 1-1.4: new full-speed USB device number 6 using ci_hdrc
- systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
- [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
- systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- systemd[1]: Starting Root Slice.
- [ OK ] Created slice Root Slice.
- systemd[1]: Created slice Root Slice.
- systemd[1]: Starting Device-mapper event daemon FIFOs.
- [ OK ] Listening on Device-mapper event daemon FIFOs.
- systemd[1]: Listening on Device-mapper event daemon FIFOs.
- systemd[1]: Starting Journal Socket.
- [ OK ] Listening on Journal Socket.
- systemd[1]: Listening on Journal Socket.
- systemd[1]: Starting Delayed Shutdown Socket.
- [ OK ] Listening on Delayed Shutdown Socket.
- systemd[1]: Listening on Delayed Shutdown Socket.
- systemd[1]: Starting User and Session Slice.
- [ OK ] Created slice User and Session Slice.
- systemd[1]: Created slice User and Session Slice.
- systemd[1]: Starting LVM2 metadata daemon socket.
- [ OK ] Listening on LVM2 metadata daemon socket.
- systemd[1]: Listening on LVM2 metadata daemon socket.
- systemd[1]: Starting System Slice.
- [ OK ] Created slice System Slice.
- systemd[1]: Created slice System Slice.
- systemd[1]: Starting Create list of required static device nodes for the current kernel...
- Starting Create list of required st... nodes for the current kernel...
- systemd[1]: Starting Slices.
- [ OK ] Reached target Slices.
- systemd[1]: Reached target Slices.
- systemd[1]: Starting Remount Root and Kernel File Systems...
- Starting Remount Root and Kernel File Systems...
- systemd[1]: Starting system-getty.slice.
- [ OK ] Created slice system-getty.slice.
- systemd[1]: Created slice system-getty.slice.
- systemd[1]: Mounted POSIX Message Queue File System.
- systemd[1]: Started Set Up Additional Binary Formats.
- systemd[1]: Mounting Temporary Directory...
- Mounting Temporary Directory...
- systemd[1]: Starting system-serial\x2dgetty.slice.
- [ OK ] Created slice syusb 1-1.4: device not accepting address 6, error -32
- stem-serial\x2dgetty.slice.
- systemd[1]: Created slice system-serial\x2dgetty.slice.
- systemd[1]: Mounted Huge Pages File System.
- systemd[1]: Starting Setup Virtual Console...
- Starting Setup Virtual Console...
- systemd[1]: Starting Journal Socket (/dev/log).
- [ OK ] Listening on Journal Socket (/dev/log).
- systemd[1]: Listening on Journal Socket (/dev/log).
- systemd[1]: Starting udev Kernel Socket.
- [ OK ] Listening on udeusb 1-1.4: new full-speed USB device number 7 using ci_hdrc
- v Kernel Socket.
- systemd[1]: Listening on udev Kernel Socket.
- systemd[1]: Starting udev Control Socket.
- [ OK ] Listening on udev Control Socket.
- systemd[1]: Listening on udev Control Socket.
- systemd[1]: Starting udev Coldplug all Devices...
- Starting udev Coldplug all Devices...
- systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
- [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
- systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- systemd[1]: Started Load Kernel Modules.
- systemd[1]: Mounted Configuration File System.
- systemd[1]: Mounting FUSE Control File System...
- Mounting FUSE Control File System...
- systemd[1]: Starting Apply Kernel Variables...
- Starting Apply Kernel Variables...
- systemd[1]: Mounted Debug File System.
- systemd[1]: Listening on Journal Audit Socket.
- systemd[1]: Starting Journal Service...
- Starting Journal Service...
- [ OK ] Mounted FUSE Control File System.
- systemd[1]: Mounted FUSE Control File System.
- [ OK ] Mounted Temporary Directory.
- systemd[1]: Mounted Temporary Directory.
- [ OK ] Started Create list of required sta...ce nodes for the current kernel.
- systemd[1]: Started Create list of required static device nodes for the current kernel.
- [ OK ] Started Remount Root and Kernel File Systems.
- systemd[1]: Started Remount Root and Kernel File Systems.
- [ OK ] Started Setup Virtual Console.
- systemd[1]: Started Setup Virtual Console.
- [ OK ] Started Apply Kernel Variables.
- usb 1-1.4: device not accepting address 7, error -32
- systemd[1]: Started Apply Kernel Variables.
- usb 1-1-port4: unable to enumerate USB device
- [ OK ] Started udev Coldplug all Devices.
- systemd[1]: Started udev Coldplug all Devices.
- systemd[1]: Started Rebuild Dynamic Linker Cache.
- systemd[1]: Started First Boot Wizard.
- systemd[1]: Started Create System Users.
- random: nonblocking pool is initialized
- systemd[1]: Started Rebuild Hardware Database.
- systemd[1]: Starting Load/Save Random Seed...
- systemd-journald[202]: File /var/log/journal/3cfd3958ce174a6ea8681f4e2f69a033/system.journal corrupted or uncleanly shut down, renaming and replacing.
- Starting Load/Save Random Seed...
- systemd[1]: Starting Create Static Device Nodes in /dev...
- Starting Create Static Device Nodes in /dev...
- [ OK ] Started Load/Save Random Seed.
- systemd[1]: Started Load/Save Random Seed.
- [ OK ] Started Create Static Device Nodes in /dev.
- systemd[1]: Started Create Static Device Nodes in /dev.
- systemd[1]: Starting udev Kernel Device Manager...
- Starting udev Kernel Device Manager...
- systemd[1]: Starting Local File Systems (Pre).
- [ OK ] Reached target Local File Systems (Pre).
- systemd[1]: Reached target Local File Systems (Pre).
- systemd[1]: Starting Local File Systems.
- [ OK ] Reached target Local File Systems.
- systemd[1]: Reached target Local File Systems.
- systemd[1]: Started Commit a transient machine-id on disk.
- systemd[1]: Started Rebuild Journal Catalog.
- systemd[1]: Started Update is Completed.
- [ OK ] Started Journal Service.
- systemd[1]: Started Journal Service.
- Starting Flush Journal to Persistent Storage...
- [ OK ] Started udev Kernel Device Manager.
- systemd-journald[202]: Received request to flush runtime journal from PID 1
- [ OK ] Found device /dev/ttymxc1.
- ERROR: v4l2 capture: slave not found!
- ERROR: v4l2 capture: slave not found!
- snd_soc_fsl_ssi: disagrees about version of symbol module_layout
- pwm_bl: disagrees about version of symbol module_layout
- snd_soc_imx_audmux: disagrees about version of symbol module_layout
- [ OK ] Reached target Sound Card.
- crc_ccitt: disagrees about version of symbol module_layout
- [ OK ] Started Flush Journal to Persistent Storage.
- Starting Create Volatile Files and Directories...
- [ OK ] Started Create Volatile Files and Directories.
- Starting Network Time Synchronization...
- Starting Update UTMP about System Boot/Shutdown...
- [ OK ] Started Network Time Synchronization.
- [ OK ] Reached target System Time Synchronized.
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Reached target System Initialization.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Reached target Timers.
- [ OK ] Reached target Basic System.
- Starting Permit User Sessions...
- Starting D-Bus System Message Bus...
- [ OK ] Started D-Bus System Message Bus.
- Starting Network Service...
- Starting Entropy Harvesting Daemon...
- [ OK ] Started Entropy Harvesting Daemon.
- Starting Login Service...
- [ OK ] Started Permit User Sessions.
- [ OK ] Started Network Service.
- Starting Network Name Resolution...
- [ OK ] Reached target Network.
- fec 2188000.ethernet eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=2188000.ethernet:06, irq=-1)
- IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- Starting OpenSSH Daemon...
- [ OK ] Started OpenSSH Daemon.
- Starting Getty on tty1...
- [ OK ] Started Getty on tty1.
- Starting Serial Getty on ttymxc1...
- [ OK ] Started Serial Getty on ttymxc1.
- [ OK ] Reached target Login Prompts.
- [ OK ] Started Network Name Resolution.
- [ OK ] Started Login Service.
- [ OK ] Reached target Multi-User System.
- [ OK ] Reached target Graphical Interface.
- Arch Linux 4.0.0 (ttymxc1)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement