[ 1645.519182] ata3.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 1645.519182]          res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 1645.519184] ata3.00: status: { DRDY }
[ 1645.519190] ata3: hard resetting link
[ 1645.995088] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 1651.001547] ata3.00: qc timeout (cmd 0xef)
[ 1651.001551] ata3.00: failed to set xfermode (err_mask=0x4)
[ 1651.001558] ata3: hard resetting link
[ 1651.477324] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 1651.501397] ata3.00: configured for UDMA/100
[ 1651.502167] ata3: EH complete
[ 2239.352713] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0xc00001 action 0x6 frozen
[ 2239.352721] ata3: SError: { RecovData Handshk LinkSeq }
[ 2239.352725] sr 2:0:0:0: CDB:
[ 2239.352727] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 2239.352740] ata3.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 2239.352740]          res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 2239.352754] ata3.00: status: { DRDY }
[ 2239.352760] ata3: hard resetting link
[ 2239.828567] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 2239.852669] ata3.00: configured for UDMA/100
[ 2239.853260] ata3: EH complete
[ 3170.079192] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0xc00001 action 0x6 frozen
[ 3170.079199] ata3: SError: { RecovData Handshk LinkSeq }
[ 3170.079205] sr 2:0:0:0: CDB:
[ 3170.079207] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 3170.079221] ata3.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 3170.079221]          res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 3170.079225] ata3.00: status: { DRDY }
[ 3170.079233] ata3: hard resetting link
[ 3170.554986] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 3170.579033] ata3.00: configured for UDMA/100
[ 3170.579589] ata3: EH complete
[ 3418.523556] usb 2-1.2: USB disconnect, device number 4
[ 3448.417155] usb 2-1.3: new high-speed USB device number 5 using ehci-pci
[ 3448.510127] usb 2-1.3: New USB device found, idVendor=0781, idProduct=556b
[ 3448.510133] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3448.510136] usb 2-1.3: Product: Cruzer Edge
[ 3448.510138] usb 2-1.3: Manufacturer: SanDisk
[ 3448.510141] usb 2-1.3: SerialNumber: 200443219213FF715F91
[ 3448.510547] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[ 3448.511232] scsi6 : usb-storage 2-1.3:1.0
[ 3449.509855] scsi 6:0:0:0: Direct-Access     SanDisk  Cruzer Edge      1.20 PQ: 0 ANSI: 5
[ 3449.510234] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 3449.512187] sd 6:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[ 3449.517965] sd 6:0:0:0: [sdc] Write Protect is on
[ 3449.517971] sd 6:0:0:0: [sdc] Mode Sense: 43 00 80 00
[ 3449.519681] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3449.529832]  sdc: sdc1
[ 3449.533827] sd 6:0:0:0: [sdc] Attached SCSI removable disk