API tools faq
paste
Advertisement
englishtim

Rune_RPi_FiiO_E10K

englishtim
Feb 20th, 2015
9,944
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 65.62 KB | None | 0 0
raw download clone embed print report
  1.  
  2. ###### System info ######
  3. Linux version 3.12.26-1-ARCH (nobody@root-armv6-copy) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 PREEMPT Fri Aug 8 17:40:14 MDT 2014
  4.  
  5. system time: Fri Feb 20 15:16:46 GMT 2015
  6.  
  7. system load: 0.31 0.33 0.32 3/78 1045
  8.  
  9. HW platform: RaspberryPi (01)
  10.  
  11. playerID: 01ce22edff80022f9116a029273a35ec69
  12.  
  13.  
  14. ###### System load statistics (procinfo -H) ######
  15. Memory: Total Used Free Buffers
  16. RAM: 482.42MiB 115.26MiB 367.16MiB 9.59MiB
  17. Swap: 0.00B 0.00B 0.00B
  18.  
  19. Bootup: Fri Feb 20 10:24:22 2015 Load average: 0.31 0.33 0.32 2/80 1047
  20.  
  21. user : 00:07:07.83 2.6% page in : 66756
  22. nice : 00:00:25.10 0.2% page out: 5860
  23. system: 00:04:43.60 1.7% page act: 7148
  24. IOwait: 00:00:01.26 0.0% page dea: 0
  25. hw irq: 00:00:01.12 0.0% page flt: 390669
  26. sw irq: 00:01:58.01 0.7% swap in : 0
  27. idle : 04:24:11.29 94.9% swap out: 0
  28. uptime: 04:52:24.11 context : 5495693
  29.  
  30. irq 3: 853355 irq 75: 1
  31. irq 16: 0 irq 77: 10227
  32. irq 32: 32385713 irq 79: 0
  33. irq 52: 0 irq 80: 0
  34. irq 65: 7 irq 84: 30493
  35. irq 66: 1
  36.  
  37. mmcblk0 1878r 4 mmcblk0p2 2r
  38. mmcblk0p1 88r mmcblk0p5 1729r
  39.  
  40. eth0 TX 24.69MiB RX 585.21MiB lo TX 1.72MiB RX 1.72MiB
  41. ifb0 TX 0.00B RX 0.00B wlan0 TX 6.41KiB RX 7.95MiB
  42. ifb1 TX 0.00B RX 0.00B
  43.  
  44.  
  45. ###### Active processes (pstree) ######
  46. systemd-+-agetty
  47. |-avahi-daemon---avahi-daemon
  48. |-avahi-dnsconfd
  49. |-dbus-daemon
  50. |-devmon---udevil
  51. |-2*[dhcpcd]
  52. |-ifplugd
  53. |-mpd---4*[{mpd}]
  54. |-nginx---nginx
  55. |-php-fpm---3*[php-fpm]
  56. |-redis-server---2*[{redis-server}]
  57. |-rpcbind
  58. |-rune_PL_wrk
  59. |-rune_SY_wrk---sh---debug_collector---sh---pstree
  60. |-sshd
  61. |-systemd-udevd
  62. `-wpa_supplicant
  63.  
  64.  
  65. ###### Audio backend ######
  66. Advanced Linux Sound Architecture Driver Version k3.12.26-1-ARCH.
  67.  
  68. Card list: (/proc/asound/cards)
  69. --------------------------------------------------
  70. 0 [ALSA ]: bcm2835 - bcm2835 ALSA
  71. bcm2835 ALSA
  72. 1 [Audio ]: USB-Audio - DigiHug USB Audio
  73. FiiO DigiHug USB Audio at usb-bcm2708_usb-1.3.1, full speed
  74.  
  75.  
  76. PLAYBACK devices: (aplay -l)
  77. --------------------------------------------------
  78. **** List of PLAYBACK Hardware Devices ****
  79. card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
  80. Subdevices: 8/8
  81. Subdevice #0: subdevice #0
  82. Subdevice #1: subdevice #1
  83. Subdevice #2: subdevice #2
  84. Subdevice #3: subdevice #3
  85. Subdevice #4: subdevice #4
  86. Subdevice #5: subdevice #5
  87. Subdevice #6: subdevice #6
  88. Subdevice #7: subdevice #7
  89. card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
  90. Subdevices: 1/1
  91. Subdevice #0: subdevice #0
  92. card 1: Audio [DigiHug USB Audio], device 0: USB Audio [USB Audio]
  93. Subdevices: 0/1
  94. Subdevice #0: subdevice #0
  95. card 1: Audio [DigiHug USB Audio], device 1: USB Audio [USB Audio #1]
  96. Subdevices: 1/1
  97. Subdevice #0: subdevice #0
  98.  
  99.  
  100. PCM devices: (aplay -L)
  101. --------------------------------------------------
  102. null
  103. Discard all samples (playback) or generate zero samples (capture)
  104. default:CARD=ALSA
  105. bcm2835 ALSA, bcm2835 ALSA
  106. Default Audio Device
  107. sysdefault:CARD=ALSA
  108. bcm2835 ALSA, bcm2835 ALSA
  109. Default Audio Device
  110. default:CARD=Audio
  111. DigiHug USB Audio, USB Audio
  112. Default Audio Device
  113. sysdefault:CARD=Audio
  114. DigiHug USB Audio, USB Audio
  115. Default Audio Device
  116. front:CARD=Audio,DEV=0
  117. DigiHug USB Audio, USB Audio
  118. Front speakers
  119. surround21:CARD=Audio,DEV=0
  120. DigiHug USB Audio, USB Audio
  121. 2.1 Surround output to Front and Subwoofer speakers
  122. surround40:CARD=Audio,DEV=0
  123. DigiHug USB Audio, USB Audio
  124. 4.0 Surround output to Front and Rear speakers
  125. surround41:CARD=Audio,DEV=0
  126. DigiHug USB Audio, USB Audio
  127. 4.1 Surround output to Front, Rear and Subwoofer speakers
  128. surround50:CARD=Audio,DEV=0
  129. DigiHug USB Audio, USB Audio
  130. 5.0 Surround output to Front, Center and Rear speakers
  131. surround51:CARD=Audio,DEV=0
  132. DigiHug USB Audio, USB Audio
  133. 5.1 Surround output to Front, Center, Rear and Subwoofer speakers
  134. surround71:CARD=Audio,DEV=0
  135. DigiHug USB Audio, USB Audio
  136. 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
  137. iec958:CARD=Audio,DEV=0
  138. DigiHug USB Audio, USB Audio
  139. IEC958 (S/PDIF) Digital Audio Output
  140.  
  141.  
  142. Simple mixer controls: (amixer scontrols)
  143. --------------------------------------------------
  144. card 0:
  145. Simple mixer control 'PCM',0
  146.  
  147. card 1:
  148. Simple mixer control 'PCM',0
  149.  
  150.  
  151. Mixer controls: (amixer controls)
  152. --------------------------------------------------
  153. card 0:
  154. numid=3,iface=MIXER,name='PCM Playback Route'
  155. numid=2,iface=MIXER,name='PCM Playback Switch'
  156. numid=1,iface=MIXER,name='PCM Playback Volume'
  157. numid=5,iface=PCM,name='IEC958 Playback Con Mask'
  158. numid=4,iface=PCM,name='IEC958 Playback Default'
  159.  
  160. card 1:
  161. numid=3,iface=MIXER,name='PCM Playback Switch'
  162. numid=4,iface=MIXER,name='PCM Playback Volume'
  163. numid=1,iface=PCM,name='Playback Channel Map'
  164. numid=2,iface=PCM,name='Playback Channel Map',device=1
  165.  
  166.  
  167. MPD audio outputs status: (mpc outputs)
  168. --------------------------------------------------
  169. Output 1 (bcm2835 ALSA) is disabled
  170. Output 2 (DigiHug USB Audio) is enabled
  171.  
  172.  
  173. ###### mpd.conf ######
  174. ###################################
  175. # Auto generated mpd.conf file
  176. # please DO NOT edit it manually!
  177. # Use RuneUI MPD config section
  178. ###################################
  179.  
  180. zeroconf_enabled "yes"
  181. zeroconf_name "RuneAudio"
  182. bind_to_address "/run/mpd.sock"
  183. bind_to_address "any"
  184. port "6600"
  185. max_connections "20"
  186. user "mpd"
  187. group "audio"
  188. db_file "/var/lib/mpd/mpd.db"
  189. sticker_file "/var/lib/mpd/sticker.sql"
  190. pid_file "/var/run/mpd/pid"
  191. music_directory "/mnt/MPD"
  192. playlist_directory "/var/lib/mpd/playlists"
  193. follow_outside_symlinks "yes"
  194. follow_inside_symlinks "yes"
  195. auto_update "no"
  196. filesystem_charset "UTF-8"
  197. id3v1_encoding "UTF-8"
  198. volume_normalization "no"
  199. audio_buffer_size "2048"
  200. buffer_before_play "10%"
  201. gapless_mp3_playback "yes"
  202. mixer_type "disabled"
  203.  
  204. input {
  205. plugin "curl"
  206. }
  207.  
  208. decoder {
  209. plugin "ffmpeg"
  210. enabled "yes"
  211. }
  212. state_file "/var/lib/mpd/mpdstate"
  213.  
  214. audio_output {
  215. name "bcm2835 ALSA"
  216. type "alsa"
  217. device "hw:0,0"
  218. dsd_usb "yes"
  219. auto_resample "no"
  220. auto_format "no"
  221. }
  222.  
  223. audio_output {
  224. name "DigiHug USB Audio"
  225. type "alsa"
  226. device "hw:1,0"
  227. dsd_usb "yes"
  228. auto_resample "no"
  229. auto_format "no"
  230. enabled "yes"
  231. }
  232.  
  233.  
  234. ###### Kernel optimization parameters ######
  235. hardware platform: RaspberryPi
  236. current orionprofile: RuneAudio
  237.  
  238.  
  239. kernel scheduler for mmcblk0: [noop] deadline cfq
  240. /proc/sys/vm/swappiness: 0
  241. /proc/sys/kernel/sched_latency_ns: 1500000
  242. /proc/sys/kernel/sched_rt_period_us: 1000000
  243. /proc/sys/kernel/sched_rt_runtime_us: 950000
  244. /proc/sys/kernel/sched_autogroup_enabled: 1
  245. /proc/sys/kernel/sched_rr_timeslice_ms: 10
  246. /proc/sys/kernel/sched_min_granularity_ns: 750000
  247. /proc/sys/kernel/sched_wakeup_granularity_ns: 1000000
  248.  
  249.  
  250. ###### Kernel module snd_usb_audio settings ######
  251. Module = "snd_usb_audio"
  252.  
  253. Attributes:
  254. coresize = "117624"
  255. initsize = "0"
  256. initstate = "live"
  257. refcnt = "1"
  258. srcversion = "130402A40F6833AC96ED23B"
  259. taint = ""
  260. uevent =
  261.  
  262. Parameters:
  263. autoclock = "Y"
  264. device_setup = "0,0,0,0,0,0,0,0"
  265. enable = "Y,Y,Y,Y,Y,Y,Y,Y"
  266. id = "(null),(null),(null),(null),(null),(null),(null),(null)"
  267. ignore_ctl_error = "N"
  268. index = "-1,-1,-1,-1,-1,-1,-1,-1"
  269. nrpacks = "3"
  270. pid = "-1,-1,-1,-1,-1,-1,-1,-1"
  271. vid = "-1,-1,-1,-1,-1,-1,-1,-1"
  272.  
  273. Sections:
  274. .ARM.exidx.exit.text= "0xbf354f74"
  275. .ARM.exidx.init.text= "0xbf354f6c"
  276. .ARM.exidx = "0xbf357688"
  277. .ARM.extab = "0xbf357658"
  278. .ARM.extab.init.text= "0xbf354f60"
  279. .bss = "0xbf35a734"
  280. .data = "0xbf357bdc"
  281. .exit.text = "0xbf3525b0"
  282. .gnu.linkonce.this_module= "0xbf35a5c0"
  283. .init.text = "0xbf363000"
  284. .note.gnu.build-id = "0xbf357bb8"
  285. .rodata = "0xbf3525c0"
  286. .rodata.str1.4 = "0xbf354f7c"
  287. .strtab = "0xbf368378"
  288. .symtab = "0xbf363048"
  289. .text = "0xbf345000"
  290. __param = "0xbf3575c8"
  291.  
  292.  
  293. ###### Systemd active startup scripts (ls -lah /etc/systemd/system/multi-user.target.wants/) ######
  294. total 8.0K
  295. drwxr-xr-x 2 root root 4.0K Sep 27 09:51 .
  296. drwxr-xr-x 6 root root 4.0K Aug 31 19:18 ..
  297. lrwxrwxrwx 1 root root 46 Aug 13 2013 avahi-dnsconfd.service -> /usr/lib/systemd/system/avahi-dnsconfd.service
  298. lrwxrwxrwx 1 root root 47 Aug 10 2014 netctl-ifplugd@eth0.service -> /usr/lib/systemd/system/netctl-ifplugd@.service
  299. lrwxrwxrwx 1 root root 37 Aug 9 2014 nginx.service -> /usr/lib/systemd/system/nginx.service
  300. lrwxrwxrwx 1 root root 39 Aug 9 2014 php-fpm.service -> /usr/lib/systemd/system/php-fpm.service
  301. lrwxrwxrwx 1 root root 37 Jul 18 2014 redis.service -> /usr/lib/systemd/system/redis.service
  302. lrwxrwxrwx 1 root root 51 Sep 3 01:59 remote-fs.target -> ../../../../usr/lib/systemd/system/remote-fs.target
  303. lrwxrwxrwx 1 root root 43 Aug 9 2014 rune_PL_wrk.service -> /usr/lib/systemd/system/rune_PL_wrk.service
  304. lrwxrwxrwx 1 root root 43 Aug 10 2014 rune_SY_wrk.service -> /usr/lib/systemd/system/rune_SY_wrk.service
  305. lrwxrwxrwx 1 root root 36 Aug 13 2013 sshd.service -> /usr/lib/systemd/system/sshd.service
  306.  
  307.  
  308. ###### Filesystem mounts ######
  309. rootfs / rootfs rw 0 0
  310. /dev/root / ext4 rw,noatime,nodiratime,nouser_xattr,errors=remount-ro,data=ordered 0 0
  311. devtmpfs /dev devtmpfs rw,relatime,size=242780k,nr_inodes=60695,mode=755 0 0
  312. sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
  313. proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
  314. securityfs /sys/kernel/security securityfs rw,nosuid,nodev,noexec,relatime 0 0
  315. tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
  316. devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
  317. tmpfs /run tmpfs rw,nosuid,nodev,mode=755 0 0
  318. tmpfs /sys/fs/cgroup tmpfs ro,nosuid,nodev,noexec,mode=755 0 0
  319. cgroup /sys/fs/cgroup/systemd cgroup rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/usr/lib/systemd/systemd-cgroups-agent,name=systemd 0 0
  320. cgroup /sys/fs/cgroup/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuset 0 0
  321. cgroup /sys/fs/cgroup/cpu,cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpuacct,cpu 0 0
  322. cgroup /sys/fs/cgroup/devices cgroup rw,nosuid,nodev,noexec,relatime,devices 0 0
  323. cgroup /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0
  324. cgroup /sys/fs/cgroup/blkio cgroup rw,nosuid,nodev,noexec,relatime,blkio 0 0
  325. cgroup /sys/fs/cgroup/perf_event cgroup rw,nosuid,nodev,noexec,relatime,perf_event 0 0
  326. cgroup /sys/fs/cgroup/net_prio cgroup rw,nosuid,nodev,noexec,relatime,net_prio 0 0
  327. systemd-1 /proc/sys/fs/binfmt_misc autofs rw,relatime,fd=22,pgrp=1,timeout=300,minproto=5,maxproto=5,direct 0 0
  328. tmpfs /tmp tmpfs rw 0 0
  329. debugfs /sys/kernel/debug debugfs rw,relatime 0 0
  330. mqueue /dev/mqueue mqueue rw,relatime 0 0
  331. configfs /sys/kernel/config configfs rw,relatime 0 0
  332. logs /var/log ramfs rw,nosuid,nodev,noatime,mode=1777,size=1M 0 0
  333. rune-logs /var/log/runeaudio ramfs rw,nosuid,nodev,noatime,mode=1777,size=10M 0 0
  334. /dev/mmcblk0p1 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro 0 0
  335. //192.168.0.3/music /mnt/MPD/NAS/NAS_DS212 cifs ro,relatime,vers=1.0,sec=ntlm,cache=none,username=music,uid=45,forceuid,gid=45,forcegid,addr=192.168.0.3,unix,posixpaths,serverino,acl,rsize=16384,wsize=17408,actimeo=1 0 0
  336.  
  337.  
  338. ###### Filesystem mounts - free space (df -h) ######
  339. Filesystem Size Used Avail Use% Mounted on
  340. /dev/root 1.7G 701M 839M 46% /
  341. devtmpfs 238M 0 238M 0% /dev
  342. tmpfs 242M 0 242M 0% /dev/shm
  343. tmpfs 242M 380K 241M 1% /run
  344. tmpfs 242M 0 242M 0% /sys/fs/cgroup
  345. tmpfs 242M 4.0K 242M 1% /tmp
  346. /dev/mmcblk0p1 90M 43M 48M 47% /boot
  347. //192.168.0.3/music 913G 656G 257G 72% /mnt/MPD/NAS/NAS_DS212
  348.  
  349.  
  350. ###### Loaded kernel modules ######
  351. Module Size Used by
  352. ecb 1891 0
  353. md4 3351 0
  354. nls_utf8 1259 1
  355. cifs 442790 2
  356. snd_usb_audio 117624 1
  357. snd_usbmidi_lib 19191 1 snd_usb_audio
  358. snd_hwdep 5977 1 snd_usb_audio
  359. snd_rawmidi 21562 1 snd_usbmidi_lib
  360. snd_seq_device 6493 1 snd_rawmidi
  361. evdev 10444 0
  362. joydev 9030 0
  363. snd_soc_wm8804 7940 0
  364. hid_logitech_dj 11225 0
  365. arc4 1716 2
  366. rt2800usb 17461 0
  367. rt2800lib 80408 1 rt2800usb
  368. rt2x00usb 11701 1 rt2800usb
  369. rt2x00lib 44813 3 rt2x00usb,rt2800lib,rt2800usb
  370. mac80211 485178 3 rt2x00lib,rt2x00usb,rt2800lib
  371. snd_soc_bcm2708_i2s 6202 0
  372. regmap_mmio 2838 1 snd_soc_bcm2708_i2s
  373. leds_gpio 2142 0
  374. led_class 4162 2 leds_gpio,rt2x00lib
  375. snd_soc_core 155972 2 snd_soc_wm8804,snd_soc_bcm2708_i2s
  376. spi_bcm2708 4844 0
  377. snd_compress 8351 1 snd_soc_core
  378. i2c_bcm2708 4895 0
  379. snd_pcm_dmaengine 5533 1 snd_soc_core
  380. regmap_spi 1941 2 snd_soc_wm8804,snd_soc_core
  381. bcm2708_dmaengine 5224 0
  382. regmap_i2c 1685 2 snd_soc_wm8804,snd_soc_core
  383. virt_dma 2309 1 bcm2708_dmaengine
  384. cfg80211 440129 2 mac80211,rt2x00lib
  385. crc_ccitt 1565 1 rt2800lib
  386. snd_bcm2835 19609 0
  387. snd_pcm 81802 5 snd_bcm2835,snd_usb_audio,snd_soc_core,snd_pcm_dmaengine
  388. snd_page_alloc 5192 1 snd_pcm
  389. snd_timer 20370 1 snd_pcm
  390. snd 62046 11 snd_bcm2835,snd_usb_audio,snd_soc_core,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_seq_device,snd_compress
  391. bcm2708_rng 1044 0
  392. rng_core 4159 1 bcm2708_rng
  393. ipv6 319689 0
  394.  
  395.  
  396. ###### Network listening sockets (netstat -lnp) ######
  397. Active Internet connections (only servers)
  398. Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
  399. tcp 0 0 0.0.0.0:6600 0.0.0.0:* LISTEN 278/mpd
  400. tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 125/redis-server 12
  401. tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 145/rpcbind
  402. tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 147/nginx: master p
  403. tcp 0 0 0.0.0.0:81 0.0.0.0:* LISTEN 147/nginx: master p
  404. tcp 0 0 0.0.0.0:82 0.0.0.0:* LISTEN 147/nginx: master p
  405. tcp 0 0 0.0.0.0:83 0.0.0.0:* LISTEN 147/nginx: master p
  406. tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 123/sshd
  407. udp 0 0 0.0.0.0:40847 0.0.0.0:* 137/avahi-daemon: r
  408. udp 0 0 0.0.0.0:742 0.0.0.0:* 145/rpcbind
  409. udp 0 0 0.0.0.0:5353 0.0.0.0:* 137/avahi-daemon: r
  410. udp 0 0 0.0.0.0:68 0.0.0.0:* 695/dhcpcd
  411. udp 0 0 0.0.0.0:68 0.0.0.0:* 373/dhcpcd
  412. udp 0 0 0.0.0.0:111 0.0.0.0:* 145/rpcbind
  413. Active UNIX domain sockets (only servers)
  414. Proto RefCnt Flags Type State I-Node PID/Program name Path
  415. unix 2 [ ACC ] STREAM LISTENING 7940 278/mpd /run/mpd.sock
  416. unix 2 [ ACC ] STREAM LISTENING 5651 1/init /var/run/avahi-daemon/socket
  417. unix 2 [ ACC ] STREAM LISTENING 5658 1/init /run/dbus/system_bus_socket
  418. unix 2 [ ACC ] STREAM LISTENING 5711 1/init /var/run/rpcbind.sock
  419. unix 2 [ ACC ] STREAM LISTENING 5975 125/redis-server 12 /tmp/redis.sock
  420. unix 2 [ ACC ] STREAM LISTENING 3017 1/init /run/systemd/private
  421. unix 2 [ ACC ] SEQPACKET LISTENING 3032 1/init /run/udev/control
  422. unix 2 [ ACC ] STREAM LISTENING 6363 145/rpcbind /var/run/rpcbind.sock
  423. unix 2 [ ACC ] STREAM LISTENING 8671 404/php-fpm: master /var/run/php-command.sock
  424. unix 2 [ ACC ] STREAM LISTENING 8674 404/php-fpm: master /var/run/php-db.sock
  425. unix 2 [ ACC ] STREAM LISTENING 8677 404/php-fpm: master /var/run/php-display.sock
  426.  
  427.  
  428. ###### Network established sockets (netstat -np) ######
  429. Active Internet connections (w/o servers)
  430. Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
  431. tcp 0 0 127.0.0.1:36498 127.0.0.1:6379 TIME_WAIT -
  432. tcp 0 0 127.0.0.1:36462 127.0.0.1:6379 TIME_WAIT -
  433. tcp 0 0 127.0.0.1:36497 127.0.0.1:6379 TIME_WAIT -
  434. tcp 0 0 127.0.0.1:49106 127.0.0.1:6600 TIME_WAIT -
  435. tcp 0 0 127.0.0.1:36469 127.0.0.1:6379 TIME_WAIT -
  436. tcp 0 0 127.0.0.1:36485 127.0.0.1:6379 TIME_WAIT -
  437. tcp 0 0 127.0.0.1:36455 127.0.0.1:6379 TIME_WAIT -
  438. tcp 0 0 192.168.0.10:80 192.168.0.13:36062 TIME_WAIT -
  439. tcp 2058 0 192.168.0.10:80 192.168.0.13:36010 ESTABLISHED 149/nginx: worker p
  440. tcp 0 0 192.168.0.10:80 192.168.0.13:36063 TIME_WAIT -
  441. tcp 0 0 127.0.0.1:36490 127.0.0.1:6379 TIME_WAIT -
  442. tcp 0 0 127.0.0.1:80 127.0.0.1:55029 TIME_WAIT -
  443. tcp 0 0 127.0.0.1:36477 127.0.0.1:6379 TIME_WAIT -
  444. tcp 0 0 127.0.0.1:36444 127.0.0.1:6379 TIME_WAIT -
  445. tcp 0 0 192.168.0.10:80 192.168.0.13:36061 ESTABLISHED 149/nginx: worker p
  446. tcp 0 0 127.0.0.1:36466 127.0.0.1:6379 TIME_WAIT -
  447. tcp 0 0 127.0.0.1:36481 127.0.0.1:6379 TIME_WAIT -
  448. tcp 0 0 192.168.0.10:40840 192.168.0.3:445 ESTABLISHED -
  449. tcp 0 0 127.0.0.1:36468 127.0.0.1:6379 TIME_WAIT -
  450. tcp 0 0 127.0.0.1:36499 127.0.0.1:6379 TIME_WAIT -
  451. tcp 0 0 192.168.0.10:80 192.168.0.13:36059 TIME_WAIT -
  452. tcp 0 0 127.0.0.1:36493 127.0.0.1:6379 TIME_WAIT -
  453. tcp 0 0 127.0.0.1:36491 127.0.0.1:6379 TIME_WAIT -
  454. tcp 0 0 127.0.0.1:36453 127.0.0.1:6379 TIME_WAIT -
  455. tcp 0 0 127.0.0.1:36473 127.0.0.1:6379 TIME_WAIT -
  456. tcp 0 0 127.0.0.1:36470 127.0.0.1:6379 TIME_WAIT -
  457. tcp 0 0 127.0.0.1:36500 127.0.0.1:6379 TIME_WAIT -
  458. tcp 0 0 127.0.0.1:36447 127.0.0.1:6379 TIME_WAIT -
  459. tcp 0 0 127.0.0.1:36494 127.0.0.1:6379 TIME_WAIT -
  460. tcp 0 0 127.0.0.1:36478 127.0.0.1:6379 TIME_WAIT -
  461. tcp 2058 0 192.168.0.10:80 192.168.0.13:36009 ESTABLISHED 149/nginx: worker p
  462. tcp 0 0 127.0.0.1:36484 127.0.0.1:6379 TIME_WAIT -
  463. tcp 0 0 127.0.0.1:36446 127.0.0.1:6379 TIME_WAIT -
  464. tcp 0 0 127.0.0.1:36460 127.0.0.1:6379 TIME_WAIT -
  465. tcp 0 0 127.0.0.1:36441 127.0.0.1:6379 TIME_WAIT -
  466. tcp 0 0 127.0.0.1:36475 127.0.0.1:6379 TIME_WAIT -
  467. tcp 0 0 127.0.0.1:36463 127.0.0.1:6379 TIME_WAIT -
  468. tcp 0 0 127.0.0.1:36472 127.0.0.1:6379 TIME_WAIT -
  469. tcp 0 0 127.0.0.1:36436 127.0.0.1:6379 TIME_WAIT -
  470. tcp 0 0 127.0.0.1:36461 127.0.0.1:6379 TIME_WAIT -
  471. tcp 0 0 127.0.0.1:36486 127.0.0.1:6379 TIME_WAIT -
  472. tcp 0 0 127.0.0.1:36450 127.0.0.1:6379 TIME_WAIT -
  473. tcp 2016 0 192.168.0.10:80 192.168.0.13:36008 ESTABLISHED 149/nginx: worker p
  474. tcp 0 0 127.0.0.1:36464 127.0.0.1:6379 TIME_WAIT -
  475. tcp 0 0 127.0.0.1:36452 127.0.0.1:6379 TIME_WAIT -
  476. tcp 0 0 127.0.0.1:36442 127.0.0.1:6379 TIME_WAIT -
  477. tcp 0 0 127.0.0.1:36489 127.0.0.1:6379 TIME_WAIT -
  478. tcp 0 0 127.0.0.1:36488 127.0.0.1:6379 TIME_WAIT -
  479. tcp 0 0 127.0.0.1:36474 127.0.0.1:6379 TIME_WAIT -
  480. tcp 0 0 127.0.0.1:80 127.0.0.1:55038 TIME_WAIT -
  481. tcp 0 0 127.0.0.1:36457 127.0.0.1:6379 TIME_WAIT -
  482. tcp 0 0 127.0.0.1:82 127.0.0.1:37477 TIME_WAIT -
  483. tcp 0 0 127.0.0.1:36443 127.0.0.1:6379 TIME_WAIT -
  484. tcp 0 0 127.0.0.1:36440 127.0.0.1:6379 TIME_WAIT -
  485. tcp 0 0 127.0.0.1:36439 127.0.0.1:6379 TIME_WAIT -
  486. tcp 0 0 127.0.0.1:36451 127.0.0.1:6379 TIME_WAIT -
  487. tcp 0 0 127.0.0.1:36503 127.0.0.1:6379 TIME_WAIT -
  488. tcp 0 0 127.0.0.1:36437 127.0.0.1:6379 TIME_WAIT -
  489. tcp 0 0 127.0.0.1:36482 127.0.0.1:6379 TIME_WAIT -
  490. tcp 0 0 127.0.0.1:36449 127.0.0.1:6379 TIME_WAIT -
  491. tcp 0 0 127.0.0.1:36459 127.0.0.1:6379 TIME_WAIT -
  492. tcp 0 0 127.0.0.1:36445 127.0.0.1:6379 TIME_WAIT -
  493. tcp 0 0 127.0.0.1:36496 127.0.0.1:6379 TIME_WAIT -
  494. tcp 0 0 127.0.0.1:36438 127.0.0.1:6379 TIME_WAIT -
  495. tcp 0 0 192.168.0.10:52237 78.46.19.144:80 TIME_WAIT -
  496. tcp 0 0 127.0.0.1:36483 127.0.0.1:6379 TIME_WAIT -
  497. tcp 0 0 192.168.0.10:80 192.168.0.13:36060 ESTABLISHED 149/nginx: worker p
  498. tcp 0 0 127.0.0.1:36502 127.0.0.1:6379 TIME_WAIT -
  499. tcp 0 0 127.0.0.1:36448 127.0.0.1:6379 TIME_WAIT -
  500. tcp 0 0 127.0.0.1:36456 127.0.0.1:6379 TIME_WAIT -
  501. tcp 0 0 127.0.0.1:36495 127.0.0.1:6379 TIME_WAIT -
  502. Active UNIX domain sockets (w/o servers)
  503. Proto RefCnt Flags Type State I-Node PID/Program name Path
  504. unix 2 [ ] DGRAM 9552 593/wpa_supplicant /var/run/wpa_supplicant/wlan0
  505. unix 2 [ ] DGRAM 3015 1/init /run/systemd/notify
  506. unix 2 [ ] DGRAM 3035 1/init /run/systemd/shutdownd
  507. unix 3 [ ] STREAM CONNECTED 6485 147/nginx: master p
  508. unix 3 [ ] STREAM CONNECTED 6245 140/avahi-daemon: c
  509. unix 3 [ ] STREAM CONNECTED 6263 139/dbus-daemon /run/dbus/system_bus_socket
  510. unix 3 [ ] STREAM CONNECTED 6286 137/avahi-daemon: r /var/run/avahi-daemon/socket
  511. unix 3 [ ] STREAM CONNECTED 6262 139/dbus-daemon /run/dbus/system_bus_socket
  512. unix 3 [ ] STREAM CONNECTED 8669 404/php-fpm: master
  513. unix 3 [ ] STREAM CONNECTED 125344 126/php
  514. unix 3 [ ] STREAM CONNECTED 6488 147/nginx: master p
  515. unix 3 [ ] DGRAM 3831 89/systemd-udevd
  516. unix 3 [ ] STREAM CONNECTED 125145 1039/php
  517. unix 3 [ ] STREAM CONNECTED 6253 137/avahi-daemon: r
  518. unix 3 [ ] STREAM CONNECTED 6486 147/nginx: master p
  519. unix 3 [ ] DGRAM 3832 89/systemd-udevd
  520. unix 3 [ ] STREAM CONNECTED 125146 125/redis-server 12 /tmp/redis.sock
  521. unix 3 [ ] STREAM CONNECTED 6069 133/avahi-dnsconfd
  522. unix 3 [ ] STREAM CONNECTED 8250 139/dbus-daemon /run/dbus/system_bus_socket
  523. unix 3 [ ] STREAM CONNECTED 125122 125/redis-server 12 /tmp/redis.sock
  524. unix 3 [ ] STREAM CONNECTED 6224 1/init
  525. unix 3 [ ] STREAM CONNECTED 125355 278/mpd /run/mpd.sock
  526. unix 3 [ ] STREAM CONNECTED 6489 147/nginx: master p
  527. unix 3 [ ] STREAM CONNECTED 125345 125/redis-server 12 /tmp/redis.sock
  528. unix 3 [ ] STREAM CONNECTED 125121 159/php
  529. unix 3 [ ] STREAM CONNECTED 8670 404/php-fpm: master
  530. unix 3 [ ] STREAM CONNECTED 6244 137/avahi-daemon: r
  531. unix 3 [ ] STREAM CONNECTED 6261 139/dbus-daemon
  532. unix 3 [ ] STREAM CONNECTED 8249 278/mpd
  533. unix 3 [ ] STREAM CONNECTED 125351 126/php
  534. unix 3 [ ] STREAM CONNECTED 6260 139/dbus-daemon
  535.  
  536.  
  537. ###### Network interfaces (ip addr) ######
  538. 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default
  539. link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  540. inet 127.0.0.1/8 scope host lo
  541. valid_lft forever preferred_lft forever
  542. 2: ifb0: mtu 1500 qdisc noop state DOWN group default qlen 32
  543. link/ether de:54:34:7a:23:1b brd ff:ff:ff:ff:ff:ff
  544. 3: ifb1: mtu 1500 qdisc noop state DOWN group default qlen 32
  545. link/ether ce:0b:55:c6:db:61 brd ff:ff:ff:ff:ff:ff
  546. 4: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
  547. link/ether b8:27:eb:a1:00:5b brd ff:ff:ff:ff:ff:ff
  548. inet 192.168.0.10/24 brd 192.168.0.255 scope global eth0
  549. valid_lft forever preferred_lft forever
  550. 5: wlan0: mtu 1500 qdisc mq state UP group default qlen 1000
  551. link/ether 00:87:23:90:2f:63 brd ff:ff:ff:ff:ff:ff
  552. inet 192.168.0.24/24 brd 192.168.0.255 scope global wlan0
  553. valid_lft forever preferred_lft forever
  554.  
  555.  
  556. ###### Network interfaces (ifconfig) ######
  557. eth0: flags=4163 mtu 1500
  558. inet 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255
  559. ether b8:27:eb:a1:00:5b txqueuelen 1000 (Ethernet)
  560. RX packets 450565 bytes 613641064 (585.2 MiB)
  561. RX errors 0 dropped 12 overruns 0 frame 0
  562. TX packets 283280 bytes 25893034 (24.6 MiB)
  563. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  564.  
  565. lo: flags=73 mtu 65536
  566. inet 127.0.0.1 netmask 255.0.0.0
  567. loop txqueuelen 0 (Local Loopback)
  568. RX packets 29052 bytes 1838459 (1.7 MiB)
  569. RX errors 0 dropped 0 overruns 0 frame 0
  570. TX packets 29052 bytes 1838459 (1.7 MiB)
  571. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  572.  
  573. wlan0: flags=4163 mtu 1500
  574. inet 192.168.0.24 netmask 255.255.255.0 broadcast 192.168.0.255
  575. ether 00:87:23:90:2f:63 txqueuelen 1000 (Ethernet)
  576. RX packets 39003 bytes 8333635 (7.9 MiB)
  577. RX errors 0 dropped 18985 overruns 0 frame 0
  578. TX packets 38 bytes 6564 (6.4 KiB)
  579. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  580.  
  581.  
  582. ###### Network netctl profiles (netctl list) ######
  583. eth0
  584. * wlan0
  585.  
  586. eth0 netctl status
  587. --------------------------------------------------------
  588. ● netctl@eth0.service - Networking for netctl profile eth0
  589. Loaded: loaded (/usr/lib/systemd/system/netctl@.service; static)
  590. Active: inactive (dead)
  591. Docs: man:netctl.profile(5)
  592.  
  593. eth0 netctl profile
  594. --------------------------------------------------------
  595. Description='eth0 connection'
  596. Interface=eth0
  597. ForceConnect=yes
  598. SkipNoCarrier=yes
  599. Connection=ethernet
  600. IP=dhcp
  601. ExecUpPost='/usr/bin/ntpd -gq || true'
  602.  
  603. wlan0 netctl status
  604. --------------------------------------------------------
  605. ● netctl@wlan0.service - Networking for netctl profile wlan0
  606. Loaded: loaded (/usr/lib/systemd/system/netctl@.service; static)
  607. Active: active (exited) since Fri 2015-02-20 10:25:11 GMT; 4h 51min ago
  608. Docs: man:netctl.profile(5)
  609. Process: 587 ExecStart=/usr/lib/network/network start %I (code=exited, status=0/SUCCESS)
  610. Main PID: 587 (code=exited, status=0/SUCCESS)
  611.  
  612. wlan0 netctl profile
  613. --------------------------------------------------------
  614. Description='wlan0 connection'
  615. Interface=wlan0
  616. ForceConnect=yes
  617. SkipNoCarrier=yes
  618. Connection=wireless
  619. Security=wpa-config
  620. WPAConfigFile='/etc/wpa_supplicant/wpa_supplicant.conf'
  621. IP=dhcp
  622. ExecUpPost='/usr/bin/ntpd -gq || true'
  623.  
  624.  
  625. ###### Network wifi status (iwconfig) ######
  626. lo no wireless extensions.
  627.  
  628. eth0 no wireless extensions.
  629.  
  630. ifb0 no wireless extensions.
  631.  
  632. ifb1 no wireless extensions.
  633.  
  634. wlan0 IEEE 802.11bgn ESSID:"TBC-2G"
  635. Mode:Managed Frequency:2.472 GHz Access Point: 74:44:01:40:5C:C9
  636. Bit Rate=48 Mb/s Tx-Power=20 dBm
  637. Retry long limit:7 RTS thr:off Fragment thr:off
  638. Encryption key:off
  639. Power Management:on
  640. Link Quality=55/70 Signal level=-55 dBm
  641. Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
  642. Tx excessive retries:0 Invalid misc:31 Missed beacon:0
  643.  
  644.  
  645. ###### Kernel status (dmesg) ######
  646. [ 0.000000] Booting Linux on physical CPU 0x0
  647. [ 0.000000] Initializing cgroup subsys cpuset
  648. [ 0.000000] Initializing cgroup subsys cpu
  649. [ 0.000000] Initializing cgroup subsys cpuacct
  650. [ 0.000000] Linux version 3.12.26-1-ARCH (nobody@root-armv6-copy) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 PREEMPT Fri Aug 8 17:40:14 MDT 2014
  651. [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  652. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  653. [ 0.000000] Machine: BCM2708
  654. [ 0.000000] cma: CMA: reserved 8 MiB at 1e800000
  655. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  656. [ 0.000000] On node 0 totalpages: 126976
  657. [ 0.000000] free_area_init_node: node 0, pgdat c089bdf4, node_mem_map c097b000
  658. [ 0.000000] Normal zone: 992 pages used for memmap
  659. [ 0.000000] Normal zone: 0 pages reserved
  660. [ 0.000000] Normal zone: 126976 pages, LIFO batch:31
  661. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  662. [ 0.000000] pcpu-alloc: [0] 0
  663. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
  664. [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708.boardrev=0xf bcm2708.serial=0x61a1005b smsc95xx.macaddr=B8:27:EB:A1:00:5B sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1fa00000 vc_mem.mem_size=0x20000000 ipv6.disable=1 avoid_safe_mode=1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 dwc_otg.fiq_enable=1 dwc_otg.fiq_fsm_enable=1 dwc_otg.fiq_fsm_mask=0x3 console=tty1 root=/dev/mmcblk0p5 rootfstype=ext4 elevator=noop apparmor=0 security="" rootwait
  665. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  666. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  667. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  668. [ 0.000000] Memory: 485564K/507904K available (6133K kernel code, 334K rwdata, 2096K rodata, 245K init, 858K bss, 22340K reserved)
  669. [ 0.000000] Virtual kernel memory layout:
  670. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  671. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  672. vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
  673. lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
  674. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  675. .text : 0xc0008000 - 0xc0811598 (8230 kB)
  676. .init : 0xc0812000 - 0xc084f59c ( 246 kB)
  677. .data : 0xc0850000 - 0xc08a39ac ( 335 kB)
  678. .bss : 0xc08a39ac - 0xc097a2f0 ( 859 kB)
  679. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  680. [ 0.000000] Preemptible hierarchical RCU implementation.
  681. [ 0.000000] NR_IRQS:394
  682. [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  683. [ 0.000000] Switching to timer-based delay loop
  684. [ 0.000000] Console: colour dummy device 80x30
  685. [ 0.000000] console [tty1] enabled
  686. [ 0.000630] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
  687. [ 0.000656] pid_max: default: 32768 minimum: 301
  688. [ 0.001156] Mount-cache hash table entries: 512
  689. [ 0.002011] Initializing cgroup subsys memory
  690. [ 0.002092] Initializing cgroup subsys devices
  691. [ 0.002114] Initializing cgroup subsys freezer
  692. [ 0.002131] Initializing cgroup subsys blkio
  693. [ 0.002145] Initializing cgroup subsys perf_event
  694. [ 0.002179] Initializing cgroup subsys net_prio
  695. [ 0.002313] CPU: Testing write buffer coherency: ok
  696. [ 0.002774] Setting up static identity map for 0xc05d7458 - 0xc05d74b4
  697. [ 0.005042] devtmpfs: initialized
  698. [ 0.022506] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  699. [ 0.023839] xor: measuring software checksum speed
  700. [ 0.120352] arm4regs : 974.000 MB/sec
  701. [ 0.220403] 8regs : 470.800 MB/sec
  702. [ 0.320509] 32regs : 470.800 MB/sec
  703. [ 0.320531] xor: using function: arm4regs (974.000 MB/sec)
  704. [ 0.321784] NET: Registered protocol family 16
  705. [ 0.327520] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  706. [ 0.328177] cpuidle: using governor ladder
  707. [ 0.328201] cpuidle: using governor menu
  708. [ 0.329013] bcm2708.uart_clock = 0
  709. [ 0.331145] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  710. [ 0.331168] hw-breakpoint: maximum watchpoint size is 4 bytes.
  711. [ 0.331185] mailbox: Broadcom VideoCore Mailbox driver
  712. [ 0.331268] bcm2708_vcio: mailbox at f200b880
  713. [ 0.331363] bcm_power: Broadcom power driver
  714. [ 0.331385] bcm_power_open() -> 0
  715. [ 0.331397] bcm_power_request(0, 8)
  716. [ 0.832111] bcm_mailbox_read -> 00000080, 0
  717. [ 0.832132] bcm_power_request -> 0
  718. [ 0.832382] Serial: AMBA PL011 UART driver
  719. [ 0.832516] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev3
  720. [ 0.858889] bio: create slab at 0
  721. [ 1.021531] raid6: int32x1 46 MB/s
  722. [ 1.192503] raid6: int32x2 71 MB/s
  723. [ 1.362508] raid6: int32x4 91 MB/s
  724. [ 1.532741] raid6: int32x8 99 MB/s
  725. [ 1.532762] raid6: using algorithm int32x8 (99 MB/s)
  726. [ 1.532774] raid6: using intx1 recovery algorithm
  727. [ 1.533402] SCSI subsystem initialized
  728. [ 1.533750] usbcore: registered new interface driver usbfs
  729. [ 1.533865] usbcore: registered new interface driver hub
  730. [ 1.534160] usbcore: registered new device driver usb
  731. [ 1.536960] Switched to clocksource stc
  732. [ 1.561816] FS-Cache: Loaded
  733. [ 1.562125] CacheFiles: Loaded
  734. [ 1.576321] NET: Registered protocol family 2
  735. [ 1.577567] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  736. [ 1.577708] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  737. [ 1.577810] TCP: Hash tables configured (established 4096 bind 4096)
  738. [ 1.577895] TCP: reno registered
  739. [ 1.577923] UDP hash table entries: 256 (order: 0, 4096 bytes)
  740. [ 1.577958] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  741. [ 1.578426] NET: Registered protocol family 1
  742. [ 1.579082] RPC: Registered named UNIX socket transport module.
  743. [ 1.579108] RPC: Registered udp transport module.
  744. [ 1.579120] RPC: Registered tcp transport module.
  745. [ 1.579132] RPC: Registered tcp NFSv4.1 backchannel transport module.
  746. [ 1.581060] bcm2708_dma: DMA manager at f2007000
  747. [ 1.581196] bcm2708_gpio: bcm2708_gpio_probe c085e470
  748. [ 1.581683] vc-mem: phys_addr:0x00000000 mem_base=0x1fa00000 mem_size:0x20000000(512 MiB)
  749. [ 1.792152] VFS: Disk quotas dquot_6.5.2
  750. [ 1.792487] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  751. [ 1.794664] FS-Cache: Netfs 'nfs' registered for caching
  752. [ 1.795728] NFS: Registering the id_resolver key type
  753. [ 1.795840] Key type id_resolver registered
  754. [ 1.795859] Key type id_legacy registered
  755. [ 1.797532] bio: create slab at 1
  756. [ 1.799079] Btrfs loaded
  757. [ 1.800202] aufs 3.12.x-20140804
  758. [ 1.800258] msgmni has been set to 964
  759. [ 1.802606] async_tx: api initialized (async)
  760. [ 1.802975] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  761. [ 1.803315] io scheduler noop registered (default)
  762. [ 1.803339] io scheduler deadline registered
  763. [ 1.803638] io scheduler cfq registered
  764. [ 1.805000] BCM2708FB: allocated DMA memory 5ec00000
  765. [ 1.805068] BCM2708FB: allocated DMA channel 0 @ f2007000
  766. [ 1.825175] Console: switching to colour frame buffer device 228x61
  767. [ 1.839711] uart-pl011 dev:f1: no DMA platform data
  768. [ 1.840437] vc-cma: Videocore CMA driver
  769. [ 1.840460] vc-cma: vc_cma_base = 0x00000000
  770. [ 1.840475] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
  771. [ 1.840488] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
  772. [ 1.851052] brd: module loaded
  773. [ 1.857153] loop: module loaded
  774. [ 1.857491] vchiq: vchiq_init_state: slot_zero = 0xde800000, is_master = 0
  775. [ 1.858492] Loading iSCSI transport class v2.0-870.
  776. [ 1.861439] usbcore: registered new interface driver ax88179_178a
  777. [ 1.861578] usbcore: registered new interface driver smsc95xx
  778. [ 1.861811] usbcore: registered new interface driver cdc_ncm
  779. [ 1.861838] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  780. [ 2.062286] Core Release: 2.80a
  781. [ 2.062323] Setting default values for core params
  782. [ 2.062372] Finished setting default values for core params
  783. [ 2.262435] Using Buffer DMA mode
  784. [ 2.262464] Periodic Transfer Interrupt Enhancement - disabled
  785. [ 2.262479] Multiprocessor Interrupt Enhancement - disabled
  786. [ 2.262493] OTG VER PARAM: 0, OTG VER FLAG: 0
  787. [ 2.262513] Dedicated Tx FIFOs mode
  788. [ 2.262924] WARN::dwc_otg_hcd_init:1042: FIQ DMA bounce buffers: virt = 0xdec14000 dma = 0x5ec14000 len=9024
  789. [ 2.262965] FIQ FSM acceleration enabled for :
  790. Non-periodic Split Transactions
  791. Periodic Split Transactions
  792. [ 2.262993] dwc_otg: Microframe scheduler enabled
  793. [ 2.263059] WARN::hcd_init:473: FIQ at 0xc04590d8
  794. [ 2.263083] WARN::hcd_init:474: FIQ ASM at 0xc045938c length 36
  795. [ 2.263116] WARN::hcd_init:500: MPHI regs_base at 0xdf806000
  796. [ 2.263150] dwc_otg bcm2708_usb: DWC OTG Controller
  797. [ 2.263211] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  798. [ 2.263305] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
  799. [ 2.263349] Init: Port Power? op_state=1
  800. [ 2.263361] Init: Power Port (0)
  801. [ 2.263704] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  802. [ 2.263729] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  803. [ 2.263748] usb usb1: Product: DWC OTG Controller
  804. [ 2.263766] usb usb1: Manufacturer: Linux 3.12.26-1-ARCH dwc_otg_hcd
  805. [ 2.263784] usb usb1: SerialNumber: bcm2708_usb
  806. [ 2.264638] hub 1-0:1.0: USB hub found
  807. [ 2.264730] hub 1-0:1.0: 1 port detected
  808. [ 2.265208] dwc_otg: FIQ enabled
  809. [ 2.265227] dwc_otg: NAK holdoff enabled
  810. [ 2.265239] dwc_otg: FIQ split-transaction FSM enabled
  811. [ 2.265260] Module dwc_common_port init
  812. [ 2.265718] usbcore: registered new interface driver usb-storage
  813. [ 2.266060] mousedev: PS/2 mouse device common for all mice
  814. [ 2.266566] md: linear personality registered for level -1
  815. [ 2.266591] md: raid0 personality registered for level 0
  816. [ 2.266606] md: raid1 personality registered for level 1
  817. [ 2.266621] md: raid10 personality registered for level 10
  818. [ 2.267095] md: raid6 personality registered for level 6
  819. [ 2.267117] md: raid5 personality registered for level 5
  820. [ 2.267133] md: raid4 personality registered for level 4
  821. [ 2.267148] md: multipath personality registered for level -4
  822. [ 2.267162] md: faulty personality registered for level -5
  823. [ 2.267659] device-mapper: uevent: version 1.0.3
  824. [ 2.268220] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
  825. [ 2.269156] device-mapper: multipath: version 1.6.0 loaded
  826. [ 2.269187] device-mapper: multipath round-robin: version 1.0.0 loaded
  827. [ 2.269204] device-mapper: multipath queue-length: version 0.1.0 loaded
  828. [ 2.269219] device-mapper: multipath service-time: version 0.2.0 loaded
  829. [ 2.269241] device-mapper: raid: Loading target version 1.5.2
  830. [ 2.269504] bcm2835-cpufreq: min=700000 max=700000 cur=700000
  831. [ 2.269619] bcm2835-cpufreq: switching to governor ondemand
  832. [ 2.269636] bcm2835-cpufreq: switching to governor ondemand
  833. [ 2.269823] sdhci: Secure Digital Host Controller Interface driver
  834. [ 2.269840] sdhci: Copyright(c) Pierre Ossman
  835. [ 2.269941] sdhci: Enable low-latency mode
  836. [ 2.307024] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
  837. [ 2.307324] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
  838. [ 2.307436] sdhci-pltfm: SDHCI platform and OF driver helper
  839. [ 2.307464] ledtrig-cpu: registered to indicate activity on CPUs
  840. [ 2.307642] hidraw: raw HID events driver (C) Jiri Kosina
  841. [ 2.308204] usbcore: registered new interface driver usbhid
  842. [ 2.308225] usbhid: USB HID core driver
  843. [ 2.309058] zram: Created 1 device(s) ...
  844. [ 2.309658] TCP: cubic registered
  845. [ 2.309687] Initializing XFRM netlink socket
  846. [ 2.309736] NET: Registered protocol family 17
  847. [ 2.309942] Key type dns_resolver registered
  848. [ 2.318122] registered taskstats version 1
  849. [ 2.324586] md: Waiting for all devices to be available before autodetect
  850. [ 2.324615] md: If you don't use raid, use raid=noautodetect
  851. [ 2.329999] md: Autodetecting RAID arrays.
  852. [ 2.330032] md: Scanned 0 and added 0 devices.
  853. [ 2.330043] md: autorun ...
  854. [ 2.330053] md: ... autorun DONE.
  855. [ 2.332447] Waiting for root device /dev/mmcblk0p5...
  856. [ 2.369704] mmc0: read SD Status register (SSR) after 2 attempts
  857. [ 2.375971] mmc0: new high speed SDHC card at address 0002
  858. [ 2.376700] mmcblk0: mmc0:0002 00000 3.70 GiB
  859. [ 2.379802] mmcblk0: p1 p2 < p5 >
  860. [ 2.455102] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
  861. [ 2.455212] VFS: Mounted root (ext4 filesystem) on device 179:5.
  862. [ 2.457290] Indeed it is in host mode hprt0 = 00021501
  863. [ 2.475703] devtmpfs: mounted
  864. [ 2.476567] Freeing unused kernel memory: 244K (c0812000 - c084f000)
  865. [ 2.637259] usb 1-1: new high-speed USB device number 2 using dwc_otg
  866. [ 2.637469] Indeed it is in host mode hprt0 = 00001101
  867. [ 2.837592] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
  868. [ 2.837632] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  869. [ 2.838711] hub 1-1:1.0: USB hub found
  870. [ 2.838875] hub 1-1:1.0: 3 ports detected
  871. [ 2.889889] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
  872. [ 2.890859] systemd[1]: Detected architecture 'arm'.
  873. [ 3.075164] IPv6: Loaded, but administratively disabled, reboot required to enable
  874. [ 3.075370] systemd[1]: Inserted module 'ipv6'
  875. [ 3.085862] systemd[1]: Set hostname to .
  876. [ 3.117413] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  877. [ 3.217636] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  878. [ 3.217674] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  879. [ 3.220810] smsc95xx v1.0.4
  880. [ 3.282440] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:a1:00:5b
  881. [ 3.377445] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
  882. [ 3.479092] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0608
  883. [ 3.479135] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  884. [ 3.479157] usb 1-1.3: Product: USB2.0 Hub
  885. [ 3.480267] hub 1-1.3:1.0: USB hub found
  886. [ 3.480754] hub 1-1.3:1.0: 4 ports detected
  887. [ 3.757563] usb 1-1.3.2: new full-speed USB device number 5 using dwc_otg
  888. [ 3.863298] usb 1-1.3.2: New USB device found, idVendor=046d, idProduct=c52b
  889. [ 3.863335] usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  890. [ 3.863355] usb 1-1.3.2: Product: USB Receiver
  891. [ 3.863372] usb 1-1.3.2: Manufacturer: Logitech
  892. [ 3.914762] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
  893. [ 3.926165] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  894. [ 3.927390] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  895. [ 3.927761] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
  896. [ 3.928713] systemd[1]: Starting Remote File Systems.
  897. [ 3.929604] systemd[1]: Reached target Remote File Systems.
  898. [ 3.930076] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  899. [ 3.930707] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  900. [ 3.930993] systemd[1]: Starting Paths.
  901. [ 3.931813] systemd[1]: Reached target Paths.
  902. [ 3.932130] systemd[1]: Starting Encrypted Volumes.
  903. [ 3.932978] systemd[1]: Reached target Encrypted Volumes.
  904. [ 3.933532] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
  905. [ 3.935477] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  906. [ 3.935894] systemd[1]: Starting Swap.
  907. [ 3.936768] systemd[1]: Reached target Swap.
  908. [ 3.937327] systemd[1]: Expecting device dev-mmcblk0p1.device...
  909. [ 3.938204] systemd[1]: Starting Root Slice.
  910. [ 3.957544] usb 1-1.3.4: new high-speed USB device number 6 using dwc_otg
  911. [ 4.012141] systemd[1]: Created slice Root Slice.
  912. [ 4.012516] systemd[1]: Starting Device-mapper event daemon FIFOs.
  913. [ 4.013850] systemd[1]: Listening on Device-mapper event daemon FIFOs.
  914. [ 4.014266] systemd[1]: Starting udev Control Socket.
  915. [ 4.015498] systemd[1]: Listening on udev Control Socket.
  916. [ 4.015839] systemd[1]: Starting Journal Socket (/dev/log).
  917. [ 4.015920] systemd[1]: Socket service systemd-journald.service not loaded, refusing.
  918. [ 4.017766] systemd[1]: Failed to listen on Journal Socket (/dev/log).
  919. [ 4.018201] systemd[1]: Starting Delayed Shutdown Socket.
  920. [ 4.019433] systemd[1]: Listening on Delayed Shutdown Socket.
  921. [ 4.019894] systemd[1]: Starting udev Kernel Socket.
  922. [ 4.021099] systemd[1]: Listening on udev Kernel Socket.
  923. [ 4.021471] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  924. [ 4.022851] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  925. [ 4.023261] systemd[1]: Starting Journal Socket.
  926. [ 4.023353] systemd[1]: Socket service systemd-journald.service not loaded, refusing.
  927. [ 4.024919] systemd[1]: Failed to listen on Journal Socket.
  928. [ 4.025544] systemd[1]: Starting System Slice.
  929. [ 4.029227] systemd[1]: Created slice System Slice.
  930. [ 4.029773] systemd[1]: Started File System Check on Root Device.
  931. [ 4.030158] systemd[1]: Mounting Temporary Directory...
  932. [ 4.037937] systemd[1]: Starting system-netctl\x2difplugd.slice.
  933. [ 4.047445] systemd[1]: Created slice system-netctl\x2difplugd.slice.
  934. [ 4.047797] systemd[1]: Starting system-getty.slice.
  935. [ 4.053261] systemd[1]: Created slice system-getty.slice.
  936. [ 4.065925] systemd[1]: Started Set Up Additional Binary Formats.
  937. [ 4.066376] systemd[1]: Starting udev Coldplug all Devices...
  938. [ 4.067737] usb 1-1.3.4: config 1 interface 0 altsetting 0 has 7 endpoint descriptors, different from the interface descriptor's value: 5
  939. [ 4.075376] usb 1-1.3.4: New USB device found, idVendor=148f, idProduct=5370
  940. [ 4.075417] usb 1-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  941. [ 4.075439] usb 1-1.3.4: Product: 802.11 n WLAN
  942. [ 4.075481] usb 1-1.3.4: Manufacturer: Ralink
  943. [ 4.075504] usb 1-1.3.4: SerialNumber: 1.0
  944. [ 4.102781] systemd[1]: Starting Load Kernel Modules...
  945. [ 4.132341] systemd[1]: Mounted Huge Pages File System.
  946. [ 4.133262] systemd[1]: Starting Setup Virtual Console...
  947. [ 4.165689] systemd[1]: Mounting Debug File System...
  948. [ 4.201774] systemd[1]: Mounting POSIX Message Queue File System...
  949. [ 4.235105] systemd-modules-load[63]: Module 'nfs' is builtin
  950. [ 4.265478] bcm2708_rng_init=df80a000
  951. [ 4.280169] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  952. [ 4.281192] systemd-modules-load[63]: Inserted module 'bcm2708_rng'
  953. [ 4.359520] systemd[1]: Starting Slices.
  954. [ 4.374133] systemd[1]: Reached target Slices.
  955. [ 4.374707] systemd[1]: Starting Remount Root and Kernel File Systems...
  956. [ 4.428689] systemd-modules-load[63]: Inserted module 'snd_bcm2835'
  957. [ 4.444778] systemd[1]: Mounted POSIX Message Queue File System.
  958. [ 4.447630] systemd[1]: Mounted Debug File System.
  959. [ 4.458778] systemd[1]: Mounted Temporary Directory.
  960. [ 4.498034] systemd[1]: Started Load Kernel Modules.
  961. [ 4.517437] systemd[1]: Started Setup Virtual Console.
  962. [ 4.529786] systemd[1]: Started Create list of required static device nodes for the current kernel.
  963. [ 5.000411] systemd[1]: Mounted FUSE Control File System.
  964. [ 5.001501] systemd[1]: Mounting Configuration File System...
  965. [ 5.028638] systemd[1]: Starting Apply Kernel Variables...
  966. [ 5.167419] systemd[1]: Mounted Configuration File System.
  967. [ 5.299742] systemd[1]: Started udev Coldplug all Devices.
  968. [ 6.404014] EXT4-fs (mmcblk0p5): Mount option "nouser_xattr" will be removed by 3.5
  969. Contact linux-ext4@vger.kernel.org if you think we should keep it.
  970.  
  971. [ 6.404091] EXT4-fs (mmcblk0p5): re-mounted. Opts: nouser_xattr,errors=remount-ro
  972. [ 6.427371] systemd[1]: Started Remount Root and Kernel File Systems.
  973. [ 6.428810] systemd[1]: Started Rebuild Dynamic Linker Cache.
  974. [ 6.429253] systemd[1]: Started Rebuild Hardware Database.
  975. [ 6.429526] systemd[1]: Starting Load/Save Random Seed...
  976. [ 6.451541] systemd[1]: Started Create System Users.
  977. [ 6.452075] systemd[1]: Started First Boot Wizard.
  978. [ 6.453012] systemd[1]: Starting Create Static Device Nodes in /dev...
  979. [ 6.515945] systemd[1]: Started Apply Kernel Variables.
  980. [ 6.618251] systemd[1]: Started Load/Save Random Seed.
  981. [ 6.622445] systemd[1]: Started Create Static Device Nodes in /dev.
  982. [ 6.864748] systemd[1]: Starting udev Kernel Device Manager...
  983. [ 6.872380] systemd[1]: Starting Local File Systems (Pre).
  984. [ 6.881653] systemd[1]: Reached target Local File Systems (Pre).
  985. [ 6.882189] systemd[1]: Mounting /var/log...
  986. [ 6.885046] systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
  987. [ 6.926281] systemd-udevd[89]: starting version 216
  988. [ 6.950942] systemd[1]: Started udev Kernel Device Manager.
  989. [ 6.981603] systemd[1]: Mounted /var/log.
  990. [ 7.121353] systemd[1]: Mounting /var/log/runeaudio...
  991. [ 7.202074] systemd[1]: Mounted /var/log/runeaudio.
  992. [ 7.684979] cfg80211: Calling CRDA to update world regulatory domain
  993. [ 7.745590] bcm2708_i2c_init_pinmode(0,0)
  994. [ 7.745622] bcm2708_i2c_init_pinmode(0,1)
  995. [ 7.745895] bcm2708_i2c bcm2708_i2c.0: BSC0 Controller at 0x20205000 (irq 79) (baudrate 100000)
  996. [ 7.753680] bcm2708_i2c_init_pinmode(1,2)
  997. [ 7.753717] bcm2708_i2c_init_pinmode(1,3)
  998. [ 7.754436] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100000)
  999. [ 7.803437] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
  1000. [ 7.808844] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
  1001. [ 8.002917] bcm2708-i2s bcm2708-i2s.0: Failed to create debugfs directory
  1002. [ 8.392190] systemd[1]: Found device /dev/mmcblk0p1.
  1003. [ 8.393423] systemd[1]: Mounting /boot...
  1004. [ 8.478747] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  1005. [ 8.497929] systemd[1]: Mounted /boot.
  1006. [ 8.665041] systemd[1]: Starting Local File Systems.
  1007. [ 8.678220] systemd[1]: Reached target Local File Systems.
  1008. [ 8.678867] systemd[1]: Started Rebuild Journal Catalog.
  1009. [ 8.679484] systemd[1]: Started Update is Completed.
  1010. [ 8.679765] systemd[1]: Starting Create Volatile Files and Directories...
  1011. [ 8.831824] systemd[1]: Started Create Volatile Files and Directories.
  1012. [ 8.833044] systemd[1]: Starting Update UTMP about System Boot/Shutdown...
  1013. [ 8.877654] usb 1-1.3.4: reset high-speed USB device number 6 using dwc_otg
  1014. [ 8.998872] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
  1015. [ 9.081006] systemd[1]: Started Update UTMP about System Boot/Shutdown.
  1016. [ 9.346878] systemd[1]: Starting System Initialization.
  1017. [ 9.367532] systemd[1]: Reached target System Initialization.
  1018. [ 9.368036] systemd[1]: Starting Daily verification of password and group files.
  1019. [ 9.371693] systemd[1]: Started Daily verification of password and group files.
  1020. [ 9.372151] systemd[1]: Starting Daily rotation of log files.
  1021. [ 9.373250] systemd[1]: Started Daily rotation of log files.
  1022. [ 9.373723] systemd[1]: Starting Avahi mDNS/DNS-SD Stack Activation Socket.
  1023. [ 9.390560] systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  1024. [ 9.391030] systemd[1]: Starting D-Bus System Message Bus Socket.
  1025. [ 9.401278] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
  1026. [ 9.406143] systemd[1]: Listening on D-Bus System Message Bus Socket.
  1027. [ 9.406625] systemd[1]: Starting Daily Cleanup of Temporary Directories.
  1028. [ 9.407189] systemd[1]: Started Daily Cleanup of Temporary Directories.
  1029. [ 9.407897] systemd[1]: Starting Timers.
  1030. [ 9.413490] cfg80211: Updating information on frequency 2412 MHz with regulatory rule:
  1031. [ 9.413523] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  1032. [ 9.413541] cfg80211: Updating information on frequency 2417 MHz with regulatory rule:
  1033. [ 9.413561] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  1034. [ 9.413575] cfg80211: Updating information on frequency 2422 MHz with regulatory rule:
  1035. [ 9.413592] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  1036. [ 9.413606] cfg80211: Updating information on frequency 2427 MHz with regulatory rule:
  1037. [ 9.413621] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  1038. [ 9.413635] cfg80211: Updating information on frequency 2432 MHz with regulatory rule:
  1039. [ 9.413650] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  1040. [ 9.413664] cfg80211: Updating information on frequency 2437 MHz with regulatory rule:
  1041. [ 9.413682] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  1042. [ 9.413696] cfg80211: Updating information on frequency 2442 MHz with regulatory rule:
  1043. [ 9.413712] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  1044. [ 9.413726] cfg80211: Updating information on frequency 2447 MHz with regulatory rule:
  1045. [ 9.413742] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  1046. [ 9.413756] cfg80211: Updating information on frequency 2452 MHz with regulatory rule:
  1047. [ 9.413772] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  1048. [ 9.413786] cfg80211: Updating information on frequency 2457 MHz with regulatory rule:
  1049. [ 9.413803] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  1050. [ 9.413817] cfg80211: Updating information on frequency 2462 MHz with regulatory rule:
  1051. [ 9.413833] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  1052. [ 9.413847] cfg80211: Updating information on frequency 2467 MHz with regulatory rule:
  1053. [ 9.413863] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  1054. [ 9.413876] cfg80211: Updating information on frequency 2472 MHz with regulatory rule:
  1055. [ 9.413891] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  1056. [ 9.413905] cfg80211: Updating information on frequency 2484 MHz with regulatory rule:
  1057. [ 9.413922] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
  1058. [ 9.419883] systemd[1]: Reached target Timers.
  1059. [ 9.420475] systemd[1]: Started Manage Sound Card State (restore and store).
  1060. [ 9.420785] systemd[1]: Starting Restore Sound Card State...
  1061. [ 9.459133] systemd[1]: Starting RPCbind Server Activation Socket.
  1062. [ 9.486580] systemd[1]: Listening on RPCbind Server Activation Socket.
  1063. [ 9.487387] systemd[1]: Starting Sockets.
  1064. [ 9.509146] systemd[1]: Reached target Sockets.
  1065. [ 9.509600] systemd[1]: Starting Basic System.
  1066. [ 9.517176] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  1067. [ 9.519108] usbcore: registered new interface driver rt2800usb
  1068. [ 9.523848] systemd[1]: Reached target Basic System.
  1069. [ 9.530110] systemd[1]: Starting A high performance web server and a reverse proxy server...
  1070. [ 9.582422] systemd[1]: Started SSH Key Generation.
  1071. [ 9.582895] systemd[1]: Starting OpenSSH Daemon...
  1072. [ 9.677700] systemd[1]: Started OpenSSH Daemon.
  1073. [ 9.678347] systemd[1]: Starting Advanced key-value store...
  1074. [ 9.789090] systemd[1]: Started Advanced key-value store.
  1075. [ 9.789884] systemd[1]: Starting RuneAudio Playback Worker After=network.target...
  1076. [ 9.903162] systemd[1]: Started RuneAudio Playback Worker After=network.target.
  1077. [ 9.903865] systemd[1]: Starting The PHP FastCGI Process Manager...
  1078. [ 10.036531] systemd[1]: Starting Avahi DNS Configuration Daemon...
  1079. [ 10.187534] systemd[1]: Started Avahi DNS Configuration Daemon.
  1080. [ 10.188212] systemd[1]: Starting Permit User Sessions...
  1081. [ 10.242303] systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
  1082. [ 10.324379] systemd[1]: Starting D-Bus System Message Bus...
  1083. [ 10.442793] systemd[1]: Started D-Bus System Message Bus.
  1084. [ 10.973897] systemd[1]: Started Avahi mDNS/DNS-SD Stack.
  1085. [ 10.975129] systemd[1]: Starting RPC bind service...
  1086. [ 11.144333] systemd[1]: Started Restore Sound Card State.
  1087. [ 11.257272] systemd[1]: Started Permit User Sessions.
  1088. [ 11.282206] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-bcm2708_usb-1.3.2/input2
  1089. [ 11.307314] systemd[1]: Started RPC bind service.
  1090. [ 11.323829] input: Logitech Unifying Device. Wireless PID:4024 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.2/0003:046D:C52B.0003/input/input0
  1091. [ 11.563980] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-bcm2708_usb-1.3.2:1
  1092. [ 11.600549] systemd[1]: Started A high performance web server and a reverse proxy server.
  1093. [ 11.638988] systemd[1]: Started The PHP FastCGI Process Manager.
  1094. [ 11.851044] systemd[1]: Found device SMSC9512/9514 Fast Ethernet Adapter.
  1095. [ 12.615567] systemd[1]: Starting system-systemd\x2drfkill.slice.
  1096. [ 12.634667] systemd[1]: Created slice system-systemd\x2drfkill.slice.
  1097. [ 12.635062] systemd[1]: Starting Load/Save RF Kill Switch Status of rfkill0...
  1098. [ 12.653686] systemd[1]: Starting Automatic wired network connection using netctl profiles...
  1099. [ 12.750530] systemd[1]: Started Automatic wired network connection using netctl profiles.
  1100. [ 12.751344] systemd[1]: Starting Getty on tty1...
  1101. [ 12.797431] systemd[1]: Started Getty on tty1.
  1102. [ 12.798278] systemd[1]: Starting Login Prompts.
  1103. [ 12.817739] systemd[1]: Reached target Login Prompts.
  1104. [ 12.818296] systemd[1]: Starting Multi-User System.
  1105. [ 12.825903] systemd[1]: Reached target Multi-User System.
  1106. [ 12.826443] systemd[1]: Starting RuneAudio System Worker...
  1107. [ 12.847391] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  1108. [ 12.884042] systemd[1]: Started RuneAudio System Worker.
  1109. [ 12.884866] systemd[1]: Starting Graphical Interface.
  1110. [ 12.907334] systemd[1]: Reached target Graphical Interface.
  1111. [ 12.953053] systemd[1]: Started Load/Save RF Kill Switch Status of rfkill0.
  1112. [ 12.967486] systemd[1]: Startup finished in 2.800s (kernel) + 10.159s (userspace) = 12.960s.
  1113. [ 13.806878] systemd[1]: Starting Sound Card.
  1114. [ 13.812876] systemd[1]: Reached target Sound Card.
  1115. [ 14.331977] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
  1116. [ 14.342225] systemd[1]: Stopping The PHP FastCGI Process Manager...
  1117. [ 14.451954] systemd[1]: Stopped The PHP FastCGI Process Manager.
  1118. [ 15.033903] systemd[1]: Starting Music Player Daemon...
  1119. [ 15.044226] systemd[1]: Started Music Player Daemon.
  1120. [ 16.340333] systemd[1]: Starting Samba NetBIOS name server...
  1121. [ 16.386068] systemd[1]: Started Samba NetBIOS name server.
  1122. [ 17.127526] usb 1-1.3.1: new full-speed USB device number 7 using dwc_otg
  1123. [ 17.277848] systemd[1]: Starting Samba NetBIOS name server...
  1124. [ 17.285455] systemd[1]: Started Samba NetBIOS name server.
  1125. [ 17.315150] usb 1-1.3.1: New USB device found, idVendor=1852, idProduct=7022
  1126. [ 17.315187] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1127. [ 17.315208] usb 1-1.3.1: Product: DigiHug USB Audio
  1128. [ 17.315227] usb 1-1.3.1: Manufacturer: FiiO
  1129. [ 17.360157] input: FiiO DigiHug USB Audio as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/input/input1
  1130. [ 17.361151] hid-generic 0003:1852:7022.0005: input,hidraw2: USB HID v1.00 Device [FiiO DigiHug USB Audio] on usb-bcm2708_usb-1.3.1/input0
  1131. [ 18.117675] systemd[1]: Started Music Player Daemon.
  1132. [ 18.366380] usbcore: registered new interface driver snd-usb-audio
  1133. [ 22.287236] systemd[1]: Stopped Music Player Daemon.
  1134. [ 23.421721] systemd[1]: Starting Music Player Daemon...
  1135. [ 23.429515] systemd[1]: Started Music Player Daemon.
  1136. [ 24.773476] systemd[1]: Starting Usb Automount (udevil)...
  1137. [ 24.790855] systemd[1]: Started Usb Automount (udevil).
  1138. [ 26.917415] usbcore: deregistering interface driver snd-usb-audio
  1139. [ 27.520196] usbcore: registered new interface driver snd-usb-audio
  1140. [ 28.218606] bcm2835-cpufreq: switching to governor performance
  1141. [ 28.218644] bcm2835-cpufreq: switching to governor performance
  1142. [ 28.643991] systemd[1]: Time has been changed
  1143. [ 28.993075] systemd[1]: Starting The PHP FastCGI Process Manager...
  1144. [ 29.749963] systemd[1]: Started The PHP FastCGI Process Manager.
  1145. [ 31.217204] FS-Cache: Netfs 'cifs' registered for caching
  1146. [ 31.218177] Key type cifs.spnego registered
  1147. [ 31.218412] Key type cifs.idmap registered
  1148. [ 35.248895] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
  1149. [ 35.263633] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
  1150. [ 35.899407] systemd[1]: Starting system-wpa_supplicant.slice.
  1151. [ 35.903064] systemd[1]: Created slice system-wpa_supplicant.slice.
  1152. [ 35.903806] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
  1153. [ 35.912757] systemd[1]: Started WPA supplicant daemon (interface-specific version).
  1154. [ 36.124856] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
  1155. [ 36.151657] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.
  1156. [ 37.688487] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
  1157. [ 37.696180] systemd[1]: Started WPA supplicant daemon (interface-specific version).
  1158. [ 37.817447] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
  1159. [ 37.828247] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.
  1160. [ 38.529485] systemd[1]: Starting system-netctl.slice.
  1161. [ 38.532868] systemd[1]: Created slice system-netctl.slice.
  1162. [ 38.533610] systemd[1]: Starting Networking for netctl profile wlan0...
  1163. [ 40.904624] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
  1164. [ 40.904777] cfg80211: Pending regulatory request, waiting for it to be processed...
  1165. [ 41.093411] wlan0: authenticate with 74:44:01:40:5c:c9
  1166. [ 41.158365] wlan0: direct probe to 74:44:01:40:5c:c9 (try 1/3)
  1167. [ 41.367061] wlan0: send auth to 74:44:01:40:5c:c9 (try 2/3)
  1168. [ 41.368934] wlan0: authenticated
  1169. [ 41.370292] rt2800usb 1-1.3.4:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
  1170. [ 41.370334] rt2800usb 1-1.3.4:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
  1171. [ 41.377061] wlan0: associate with 74:44:01:40:5c:c9 (try 1/3)
  1172. [ 41.379804] wlan0: RX AssocResp from 74:44:01:40:5c:c9 (capab=0x411 status=0 aid=2)
  1173. [ 41.392734] wlan0: associated
  1174. [ 48.149617] systemd[1]: getty@tty1.service has no holdoff time, scheduling restart.
  1175. [ 48.390443] systemd[1]: Stopping Getty on tty1...
  1176. [ 48.391963] systemd[1]: Starting Getty on tty1...
  1177. [ 48.412778] systemd[1]: Started Getty on tty1.
  1178. [ 49.891336] systemd[1]: Started Networking for netctl profile wlan0.
  1179. [ 49.896078] systemd[1]: Starting Network.
  1180. [ 49.896358] systemd[1]: Reached target Network.
  1181. [ 909.859231] systemd[1]: Starting Cleanup of Temporary Directories...
  1182. [ 909.950739] systemd[1]: Started Cleanup of Temporary Directories.
  1183.  
  1184. ###### PHP backend ######
  1185. php version: 5.5.17
  1186. debug level: 0
  1187.  
  1188.  
  1189. Debug data collected in 3.907 seconds.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!