Advertisement
Guest User

Untitled

a guest
Mar 5th, 2012
45
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.77 KB | None | 0 0
  1. smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
  2. Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Barracuda 7200.12 family
  6. Device Model: ST31000528AS
  7. Serial Number: 5VP4W5P2
  8. Firmware Version: CC38
  9. User Capacity: 1 000 204 886 016 bytes
  10. Device is: In smartctl database [for details use: -P show]
  11. ATA Version is: 8
  12. ATA Standard is: ATA-8-ACS revision 4
  13. Local Time is: Sun Mar 4 19:59:52 2012 CET
  14. SMART support is: Available - device has SMART capability.
  15. SMART support is: Enabled
  16.  
  17. === START OF READ SMART DATA SECTION ===
  18. SMART overall-health self-assessment test result: PASSED
  19.  
  20. General SMART Values:
  21. Offline data collection status: (0x82) Offline data collection activity
  22. was completed without error.
  23. Auto Offline Data Collection: Enabled.
  24. Self-test execution status: ( 0) The previous self-test routine completed
  25. without error or no self-test has ever
  26. been run.
  27. Total time to complete Offline
  28. data collection: ( 600) seconds.
  29. Offline data collection
  30. capabilities: (0x7b) SMART execute Offline immediate.
  31. Auto Offline data collection on/off support.
  32. Suspend Offline collection upon new
  33. command.
  34. Offline surface scan supported.
  35. Self-test supported.
  36. Conveyance Self-test supported.
  37. Selective Self-test supported.
  38. SMART capabilities: (0x0003) Saves SMART data before entering
  39. power-saving mode.
  40. Supports SMART auto save timer.
  41. Error logging capability: (0x01) Error logging supported.
  42. General Purpose Logging supported.
  43. Short self-test routine
  44. recommended polling time: ( 1) minutes.
  45. Extended self-test routine
  46. recommended polling time: ( 176) minutes.
  47. Conveyance self-test routine
  48. recommended polling time: ( 2) minutes.
  49. SCT capabilities: (0x103f) SCT Status supported.
  50. SCT Error Recovery Control supported.
  51. SCT Feature Control supported.
  52. SCT Data Table supported.
  53.  
  54. SMART Attributes Data Structure revision number: 10
  55. Vendor Specific SMART Attributes with Thresholds:
  56. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  57. 1 Raw_Read_Error_Rate 0x000f 113 099 006 Pre-fail Always - 58085844
  58. 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0
  59. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 16
  60. 5 Reallocated_Sector_Ct 0x0033 099 099 036 Pre-fail Always - 50
  61. 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 521028689
  62. 9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 12898
  63. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  64. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 8
  65. 183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1
  66. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  67. 187 Reported_Uncorrect 0x0032 082 082 000 Old_age Always - 18
  68. 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 4295032834
  69. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  70. 190 Airflow_Temperature_Cel 0x0022 072 053 045 Old_age Always - 28 (Lifetime Min/Max 23/31)
  71. 194 Temperature_Celsius 0x0022 028 047 000 Old_age Always - 28 (0 18 0 0)
  72. 195 Hardware_ECC_Recovered 0x001a 021 016 000 Old_age Always - 58085844
  73. 197 Current_Pending_Sector 0x0012 100 099 000 Old_age Always - 7
  74. 198 Offline_Uncorrectable 0x0010 100 099 000 Old_age Offline - 7
  75. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  76. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 119108033065588
  77. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 4221505561
  78. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2149330359
  79.  
  80. SMART Error Log Version: 1
  81. ATA Error Count: 18 (device log contains only the most recent five errors)
  82. CR = Command Register [HEX]
  83. FR = Features Register [HEX]
  84. SC = Sector Count Register [HEX]
  85. SN = Sector Number Register [HEX]
  86. CL = Cylinder Low Register [HEX]
  87. CH = Cylinder High Register [HEX]
  88. DH = Device/Head Register [HEX]
  89. DC = Device Command Register [HEX]
  90. ER = Error register [HEX]
  91. ST = Status register [HEX]
  92. Powered_Up_Time is measured from power on, and printed as
  93. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  94. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  95.  
  96. Error 18 occurred at disk power-on lifetime: 11119 hours (463 days + 7 hours)
  97. When the command that caused the error occurred, the device was active or idle.
  98.  
  99. After command completion occurred, registers were:
  100. ER ST SC SN CL CH DH
  101. -- -- -- -- -- -- --
  102. 40 51 00 ff ff ff 0f
  103.  
  104. Commands leading to the command that caused the error were:
  105. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  106. -- -- -- -- -- -- -- -- ---------------- --------------------
  107. 60 00 40 ff ff ff 4f 00 13d+16:09:02.889 READ FPDMA QUEUED
  108. 27 00 00 00 00 00 e0 00 13d+16:09:02.889 READ NATIVE MAX ADDRESS EXT
  109. ec 00 00 00 00 00 a0 00 13d+16:09:02.888 IDENTIFY DEVICE
  110. ef 03 46 00 00 00 a0 00 13d+16:09:02.887 SET FEATURES [Set transfer mode]
  111. 27 00 00 00 00 00 e0 00 13d+16:09:02.887 READ NATIVE MAX ADDRESS EXT
  112.  
  113. Error 17 occurred at disk power-on lifetime: 11119 hours (463 days + 7 hours)
  114. When the command that caused the error occurred, the device was active or idle.
  115.  
  116. After command completion occurred, registers were:
  117. ER ST SC SN CL CH DH
  118. -- -- -- -- -- -- --
  119. 40 51 00 ff ff ff 0f
  120.  
  121. Commands leading to the command that caused the error were:
  122. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  123. -- -- -- -- -- -- -- -- ---------------- --------------------
  124. 60 00 40 ff ff ff 4f 00 13d+16:08:59.787 READ FPDMA QUEUED
  125. 27 00 00 00 00 00 e0 00 13d+16:08:59.787 READ NATIVE MAX ADDRESS EXT
  126. ec 00 00 00 00 00 a0 00 13d+16:08:59.786 IDENTIFY DEVICE
  127. ef 03 46 00 00 00 a0 00 13d+16:08:59.786 SET FEATURES [Set transfer mode]
  128. 27 00 00 00 00 00 e0 00 13d+16:08:59.785 READ NATIVE MAX ADDRESS EXT
  129.  
  130. Error 16 occurred at disk power-on lifetime: 11119 hours (463 days + 7 hours)
  131. When the command that caused the error occurred, the device was active or idle.
  132.  
  133. After command completion occurred, registers were:
  134. ER ST SC SN CL CH DH
  135. -- -- -- -- -- -- --
  136. 40 51 00 ff ff ff 0f
  137.  
  138. Commands leading to the command that caused the error were:
  139. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  140. -- -- -- -- -- -- -- -- ---------------- --------------------
  141. 60 00 40 ff ff ff 4f 00 13d+16:08:56.773 READ FPDMA QUEUED
  142. 27 00 00 00 00 00 e0 00 13d+16:08:56.773 READ NATIVE MAX ADDRESS EXT
  143. ec 00 00 00 00 00 a0 00 13d+16:08:56.772 IDENTIFY DEVICE
  144. ef 03 46 00 00 00 a0 00 13d+16:08:56.772 SET FEATURES [Set transfer mode]
  145. 27 00 00 00 00 00 e0 00 13d+16:08:56.772 READ NATIVE MAX ADDRESS EXT
  146.  
  147. Error 15 occurred at disk power-on lifetime: 11119 hours (463 days + 7 hours)
  148. When the command that caused the error occurred, the device was active or idle.
  149.  
  150. After command completion occurred, registers were:
  151. ER ST SC SN CL CH DH
  152. -- -- -- -- -- -- --
  153. 40 51 00 ff ff ff 0f
  154.  
  155. Commands leading to the command that caused the error were:
  156. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  157. -- -- -- -- -- -- -- -- ---------------- --------------------
  158. 60 00 40 ff ff ff 4f 00 13d+16:08:53.681 READ FPDMA QUEUED
  159. 27 00 00 00 00 00 e0 00 13d+16:08:53.680 READ NATIVE MAX ADDRESS EXT
  160. ec 00 00 00 00 00 a0 00 13d+16:08:53.680 IDENTIFY DEVICE
  161. ef 03 46 00 00 00 a0 00 13d+16:08:53.679 SET FEATURES [Set transfer mode]
  162. 27 00 00 00 00 00 e0 00 13d+16:08:53.679 READ NATIVE MAX ADDRESS EXT
  163.  
  164. Error 14 occurred at disk power-on lifetime: 11119 hours (463 days + 7 hours)
  165. When the command that caused the error occurred, the device was active or idle.
  166.  
  167. After command completion occurred, registers were:
  168. ER ST SC SN CL CH DH
  169. -- -- -- -- -- -- --
  170. 40 51 00 ff ff ff 0f
  171.  
  172. Commands leading to the command that caused the error were:
  173. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  174. -- -- -- -- -- -- -- -- ---------------- --------------------
  175. 60 00 40 ff ff ff 4f 00 13d+16:08:50.575 READ FPDMA QUEUED
  176. 27 00 00 00 00 00 e0 00 13d+16:08:50.575 READ NATIVE MAX ADDRESS EXT
  177. ec 00 00 00 00 00 a0 00 13d+16:08:50.574 IDENTIFY DEVICE
  178. ef 03 46 00 00 00 a0 00 13d+16:08:50.574 SET FEATURES [Set transfer mode]
  179. 27 00 00 00 00 00 e0 00 13d+16:08:50.574 READ NATIVE MAX ADDRESS EXT
  180.  
  181. SMART Self-test log structure revision number 1
  182. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  183. # 1 Short offline Completed without error 00% 6 -
  184. # 2 Short offline Completed without error 00% 2 -
  185.  
  186. SMART Selective self-test log data structure revision number 1
  187. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  188. 1 0 0 Not_testing
  189. 2 0 0 Not_testing
  190. 3 0 0 Not_testing
  191. 4 0 0 Not_testing
  192. 5 0 0 Not_testing
  193. Selective self-test flags (0x0):
  194. After scanning selected spans, do NOT read-scan remainder of disk.
  195. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement