se=0x1ec00000 vc_mem.mem_size=0x20000000  dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty2 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait logo.nologo quiet loglevel=0 splash
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] allocated 786432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 384MB = 384MB total
[    0.000000] Memory: 380688k/380688k available, 12528k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd8800000 - 0xff000000   ( 616 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd8000000   ( 384 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc05148fc   (5171 kB)
[    0.000000]       .init : 0xc0515000 - 0xc0539dac   ( 148 kB)
[    0.000000]       .data : 0xc053a000 - 0xc05701a0   ( 217 kB)
[    0.000000]        .bss : 0xc05701c4 - 0xc06186cc   ( 674 kB)
[    0.000000] NR_IRQS:330
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty2] enabled
[    0.000391] Calibrating delay loop... 464.48 BogoMIPS (lpj=2322432)
[    0.060048] pid_max: default: 32768 minimum: 301
[    0.060379] Mount-cache hash table entries: 512
[    0.061132] Initializing cgroup subsys cpuacct
[    0.061160] Initializing cgroup subsys memory
[    0.061217] Initializing cgroup subsys devices
[    0.061232] Initializing cgroup subsys freezer
[    0.061243] Initializing cgroup subsys blkio
[    0.061322] CPU: Testing write buffer coherency: ok
[    0.061641] hw perfevents: enabled with v6 PMU driver, 3 counters available
[    0.061748] Setting up static identity map for 0x3b3ad8 - 0x3b3b34
[    0.063278] devtmpfs: initialized
[    0.072211] NET: Registered protocol family 16
[    0.077142] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.078280] bcm2708.uart_clock = 0
[    0.079742] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.079761] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.079775] mailbox: Broadcom VideoCore Mailbox driver
[    0.079849] bcm2708_vcio: mailbox at f200b880
[    0.079931] bcm_power: Broadcom power driver
[    0.079950] bcm_power_open() -> 0
[    0.079960] bcm_power_request(0, 8)
[    0.580632] bcm_mailbox_read -> 00000080, 0
[    0.580649] bcm_power_request -> 0
[    0.580659] Serial: AMBA PL011 UART driver
[    0.580790] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[    0.601157] bio: create slab <bio-0> at 0
[    0.602029] SCSI subsystem initialized
[    0.602256] usbcore: registered new interface driver usbfs
[    0.602361] usbcore: registered new interface driver hub
[    0.602620] usbcore: registered new device driver usb
[    0.604043] Switching to clocksource stc
[    0.604283] FS-Cache: Loaded
[    0.604549] CacheFiles: Loaded
[    0.617546] NET: Registered protocol family 2
[    0.618383] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.618825] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    0.619081] TCP: Hash tables configured (established 16384 bind 16384)
[    0.619127] TCP: reno registered
[    0.619148] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.619179] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.619451] NET: Registered protocol family 1
[    0.620082] RPC: Registered named UNIX socket transport module.
[    0.620107] RPC: Registered udp transport module.
[    0.620117] RPC: Registered tcp transport module.
[    0.620126] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.620432] Trying to unpack rootfs image as initramfs...
[    0.856999] Freeing initrd memory: 1988K
[    0.857667] bcm2708_dma: DMA manager at f2007000
[    0.857770] bcm2708_gpio: bcm2708_gpio_probe c0547e68
[    0.858169] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[    0.859162] audit: initializing netlink socket (disabled)
[    0.859233] type=2000 audit(0.850:1): initialized
[    0.979964] VFS: Disk quotas dquot_6.5.2
[    0.980053] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.980470] FS-Cache: Netfs 'nfs' registered for caching
[    0.980851] NFS: Registering the id_resolver key type
[    0.980981] Key type id_resolver registered
[    0.980997] Key type id_legacy registered
[    0.981348] msgmni has been set to 747
[    0.983443] io scheduler noop registered
[    0.983467] io scheduler deadline registered
[    0.983501] io scheduler cfq registered (default)
[    0.988925] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    0.988947] crc32: self tests passed, processed 225944 bytes in 2582000 nsec
[    0.990865] crc32c: CRC_LE_BITS = 64
[    0.990877] crc32c: self tests passed, processed 225944 bytes in 931000 nsec
[    1.028239] Console: switching to colour frame buffer device 240x67
[    1.063068] brd: module loaded
[    1.068517] loop: module loaded
[    1.068905] vchiq: vchiq_init_state: slot_zero = 0xd8804000, is_master = 0
[    1.070254] usbcore: registered new interface driver smsc95xx
[    1.070417] usbcore: registered new interface driver cdc_ncm
[    1.070438] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.275627] Core Release: 2.80a
[    1.275658] Setting default values for core params
[    1.275717] Finished setting default values for core params
[    1.480843] Using Buffer DMA mode
[    1.480867] Periodic Transfer Interrupt Enhancement - disabled
[    1.480879] Multiprocessor Interrupt Enhancement - disabled
[    1.480893] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.480910] Dedicated Tx FIFOs mode
[    1.481137] dwc_otg: Microframe scheduler enabled
[    1.481194] dwc_otg bcm2708_usb: DWC OTG Controller
[    1.481256] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[    1.481325] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    1.481399] Init: Port Power? op_state=1
[    1.481410] Init: Power Port (0)
[    1.481539] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.481566] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.481584] usb usb1: Product: DWC OTG Controller
[    1.481600] usb usb1: Manufacturer: Linux 3.6.11+ dwc_otg_hcd
[    1.481614] usb usb1: SerialNumber: bcm2708_usb
[    1.482451] hub 1-0:1.0: USB hub found
[    1.482503] hub 1-0:1.0: 1 port detected
[    1.482875] dwc_otg: FIQ enabled
[    1.482892] dwc_otg: NAK holdoff enabled
[    1.482915] Module dwc_common_port init
[    1.483159] Initializing USB Mass Storage driver...
[    1.483379] usbcore: registered new interface driver usb-storage
[    1.483394] USB Mass Storage support registered.
[    1.483543] usbcore: registered new interface driver libusual
[    1.483854] mousedev: PS/2 mouse device common for all mice
[    1.484642] bcm2835-cpufreq: min=700000 max=840000 cur=700000
[    1.484780] bcm2835-cpufreq: switching to governor performancebcm2835-cpufreq: switching to governor performance
[    1.485822] cpuidle: using governor ladder
[    1.485841] cpuidle: using governor menu
[    1.485912] sdhci: Secure Digital Host Controller Interface driver
[    1.485921] sdhci: Copyright(c) Pierre Ossman
[    1.486010] sdhci: Enable low-latency mode
[    1.486257] Registered led device: mmc0::
[    1.524285] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[    1.524344] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[    1.524418] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.524714] usbcore: registered new interface driver usbhid
[    1.524728] usbhid: USB HID core driver
[    1.525547] TCP: cubic registered
[    1.525565] Initializing XFRM netlink socket
[    1.525606] NET: Registered protocol family 17
[    1.525770] Key type dns_resolver registered
[    1.526190] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    1.529101] registered taskstats version 1
[    1.534255] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.535759] Freeing init memory: 144K
[    1.626183] mmc0: could read SD Status register (SSR) at the 5th attempt
[    1.630297] mmc0: new high speed SDHC card at address 0007
[    1.634226] mmcblk0: mmc0:0007 SD08G 7.21 GiB
[    1.636197]  mmcblk0: p1 p2
[    1.674313] Indeed it is in host mode hprt0 = 00021501
[    1.914282] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.914447] Indeed it is in host mode hprt0 = 00001101
[    2.214569] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[    2.214599] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.215307] hub 1-1:1.0: USB hub found
[    2.215434] hub 1-1:1.0: 3 ports detected
[    2.494289] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.594688] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.594715] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.597512] smsc95xx v1.0.4
[    2.658619] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d6:66:ad
[    2.754295] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[    2.855195] usb 1-1.2: New USB device found, idVendor=0ccd, idProduct=0058
[    2.855222] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.855236] usb 1-1.2: Product: Cinergy HT XE
[    2.855249] usb 1-1.2: Manufacturer: TerraTec
[    2.855261] usb 1-1.2: SerialNumber: 00000000
[    4.611013] EXT4-fs (mmcblk0p2): recovery complete
[    4.615784] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[   11.109743] dvb-usb: found a 'Terratec Cinergy HT USB XE' in cold state, will try to load a firmware
[   12.086753] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[   12.289918] dib0700: firmware started successfully.
[   12.794358] dvb-usb: found a 'Terratec Cinergy HT USB XE' in warm state.
[   12.794625] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   12.796560] DVB: registering new adapter (Terratec Cinergy HT USB XE)
[   13.097635] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[   13.121925] xc2028 1-0061: creating new instance
[   13.121950] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[   13.157951] firmware 1-1.2: firmware_loading_store: vmap() failed
[   13.158191] xc2028 1-0061: Could not load firmware xc3028-v27.fw.
[   13.174144] Registered IR keymap rc-dib0700-rc5
[   13.174770] input: IR-receiver inside an USB DVB receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/rc/rc0/input0
[   13.174804] rc0: IR-receiver inside an USB DVB receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/rc/rc0
[   13.177066] dvb-usb: schedule remote query interval to 50 msecs.
[   13.177098] dvb-usb: Terratec Cinergy HT USB XE successfully initialized and connected.
[   13.184068] usbcore: registered new interface driver dvb_usb_dib0700
[   16.268600] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   16.781294] bcm2835 ALSA card created!
[   16.781523] bcm2835 ALSA chip created!
[   16.781672] bcm2835 ALSA chip created!
[   16.781827] bcm2835 ALSA chip created!
[   16.781974] bcm2835 ALSA chip created!
[   16.782122] bcm2835 ALSA chip created!
[   16.782269] bcm2835 ALSA chip created!
[   16.782414] bcm2835 ALSA chip created!
[   16.869629] bcm2708 watchdog, heartbeat=10 sec (nowayout=0)
[   19.824546] Adding 127996k swap on /var/swapfile.  Priority:-1 extents:3 across:160764k SS
[   23.601533] Installing knfsd (copyright (C) 1996 [email protected]).
[   24.349161] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   32.886386] watchdog stopped
root@xbian:~#