Advertisement
Guest User

Firefly-RK3288_Android4.4_201412111722.img

a guest
Dec 19th, 2014
362
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 61.25 KB | None | 0 0
  1. DDR Version 1.00 20141007
  2. In
  3. SRX
  4. Channel a: DDR3 200MHz
  5. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  6. Channel b: DDR3 200MHz
  7. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  8. OUT
  9.  
  10.  
  11. U-Boot 2014.10-RK3288-02 (Nov 26 2014 - 09:28:44)
  12.  
  13. CPU: rk3288
  14. CPU's clock information:
  15. arm pll = 600000000HZ
  16. periph pll = 300000000HZ
  17. ddr pll = 200000000HZ
  18. codec pll = 594000000HZ
  19. Board: Rockchip platform Board
  20. DRAM: Found dram banks:1
  21. Adding bank:0000000000000000(0000000080000000)
  22. 128 MiB
  23. storage init OK!
  24. Using default environment
  25.  
  26. GetParam
  27. check parameter success
  28. Unknow param: MACHINE_MODEL:rk30sdk!
  29. Unknow param: MACHINE_ID:007!
  30. Unknow param: MANUFACTURER:RK30SDK!
  31. Unknow param: PWR_HLD: 0,0,A,0,1!
  32. failed to prepare fdt from boot!
  33. power key: bank-0 pin-5
  34. can't find dts node for ricoh619
  35. pmic:act8846
  36. Can't find dts node for fuel guage cw201x
  37. SecureBootEn = 0, SecureBootLock = 0
  38.  
  39. #Boot ver: 2014-11-26#2.17
  40. sn:****************
  41. checkKey
  42. vbus = 0
  43. no fuel gauge found
  44. no fuel gauge found
  45. read logo_on switch from dts [0]
  46. no fuel gauge found
  47. Hit any key to stop autoboot: 0
  48. failed to load fdt from boot!
  49. kernel @ 0x02000000 (0x005f8ad8)
  50. ramdisk @ 0x04bf0000 (0x00120fad)
  51. Secure Boot state: 0
  52. bootrk: do_bootm_linux...
  53. Loading Device Tree to 0480c000, end 04827184 ... OK
  54. Add bank:0000000000000000, 0000000080000000
  55.  
  56. Starting kernel ...
  57.  
  58. <hit enter to activate fiq debugger>
  59. [ 0.000000] Booting Linux on physical CPU 0x500
  60. [ 0.000000] Initializing cgroup subsys cpu
  61. [ 0.000000] Initializing cgroup subsys cpuacct
  62. [ 0.000000] Linux version 3.10.0 (dujw@tchipserver2) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #62 SMP PREEMPT Thu Dec 11 17:18:43 CST 2014
  63. [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
  64. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  65. [ 0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
  66. [ 0.000000] hdmi init vic is -1
  67. [ 0.000000] rockchip_ion_reserve
  68. [ 0.000000] cma: CMA: reserved 16 MiB at 2e800000
  69. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  70. [ 0.000000] Boot mode: REBOOT (6) flag: NORMAL (0xc3524200)
  71. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1eb6000 s14016 r8192 d14656 u36864
  72. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768
  73. [ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.hardware=rk30board androidboot.console=ttyFIQ0 board.ap_has_alsa=0 init=/init mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00180000@0x00092000(system),0x00002000@0x00212000(metadata),0x00200000@0x00214000(userdata),0x00020000@0x00414000(radical_update),-@0x00434000(user) storagemedia=emmc loader.timestamp=2014-11-26_09:28:44 hdmi.vic=-1 androidboot.serialno=****************
  74. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  75. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  76. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  77. [ 0.000000] Memory: 2048MB = 2048MB total
  78. [ 0.000000] Memory: 2047084k/2047084k available, 50068k reserved, 1318912K highmem
  79. [ 0.000000] Virtual kernel memory layout:
  80. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  81. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  82. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  83. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  84. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  85. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  86. [ 0.000000] .text : 0xc0008000 - 0xc0a76cb8 (10684 kB)
  87. [ 0.000000] .init : 0xc0a77000 - 0xc0cc66c0 (2366 kB)
  88. [ 0.000000] .data : 0xc0cc8000 - 0xc0d64ec8 ( 628 kB)
  89. [ 0.000000] .bss : 0xc0d64ec8 - 0xc0e7ee04 (1128 kB)
  90. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  91. [ 0.000000] Preemptible hierarchical RCU implementation.
  92. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  93. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  94. [ 0.000000] rk_clk_tree_init start! cru base = 0xfed00000
  95. [ 0.000000] rk_get_uboot_display_flag: uboot_logo_on = 0
  96. [ 0.000000] rkclk_init_clks: cnt_parent = 7
  97. [ 0.000000] rkclk_init_clks: cnt_rate = 32
  98. [ 0.000000] Architected local timer running at 24.00MHz (phys).
  99. [ 0.000000] Switching to timer-based delay loop
  100. [ 0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
  101. [ 0.000000] process version: 0
  102. [ 0.000000] channel:0, lkg:0
  103. [ 0.000000] target-temp:95
  104. [ 0.000000] channel:2, lkg:0
  105. [ 0.000000] target-temp:95
  106. [ 0.000000] channel:0, lkg:0
  107. [ 0.000000] target-temp:95
  108. [ 0.000000] channel:1, lkg:0
  109. [ 0.000000] target-temp:95
  110. [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
  111. [ 0.525111] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  112. [ 0.525163] pid_max: default: 32768 minimum: 301
  113. [ 0.525502] Security Framework initialized
  114. [ 0.525544] SELinux: Initializing.
  115. [ 0.525774] Mount-cache hash table entries: 512
  116. [ 0.527806] Initializing cgroup subsys debug
  117. [ 0.527848] Initializing cgroup subsys freezer
  118. [ 0.527937] CPU: Testing write buffer coherency: ok
  119. [ 0.528693] /cpus/cpu@0 missing clock-frequency property
  120. [ 0.528736] /cpus/cpu@1 missing clock-frequency property
  121. [ 0.528771] /cpus/cpu@2 missing clock-frequency property
  122. [ 0.528803] /cpus/cpu@3 missing clock-frequency property
  123. [ 0.528925] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
  124. [ 0.529037] Setting up static identity map for 0xc078b0a8 - 0xc078b100
  125. [ 0.533406] last_log: 0x2e100000 map to 0xf0004000 and copy to 0xf0086000, size 0x80000 early 0x1519 (version 3.0)
  126. [ 0.613016] CPU1: Booted secondary processor
  127. [ 0.613107] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
  128. [ 0.632732] CPU2: Booted secondary processor
  129. [ 0.632816] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
  130. [ 0.652512] CPU3: Booted secondary processor
  131. [ 0.652595] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
  132. [ 0.652964] Brought up 4 CPUs
  133. [ 0.653064] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  134. [ 0.653095] CPU: All CPU(s) started in SVC mode.
  135. [ 0.655332] devtmpfs: initialized
  136. [ 0.673201] pinctrl core: initialized pinctrl subsystem
  137. [ 0.673931] regulator-dummy: no parameters
  138. [ 0.675577] NET: Registered protocol family 16
  139. [ 0.680850] DMA: preallocated 256 KiB pool for atomic coherent allocations
  140. [ 0.681730] ion_snapshot: 0x2e1b0000 map to 0xf0107000 and copy to 0xc0e5a454 (version 0.1)
  141. [ 0.682224] Registered FIQ tty driver
  142. [ 0.685637] console [ttyFIQ0] enabled
  143. [ 0.686226] Registered fiq debugger ttyFIQ0
  144. [ 0.688085] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
  145. [ 0.688172] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
  146. [ 0.688244] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
  147. [ 0.688317] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
  148. [ 0.688579] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
  149. [ 0.688812] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
  150. [ 0.689038] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
  151. [ 0.689263] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
  152. [ 0.689486] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
  153. [ 0.689710] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
  154. [ 0.689950] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
  155. [ 0.690183] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
  156. [ 0.690427] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
  157. [ 0.690664] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
  158. [ 0.690722] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
  159. [ 0.690775] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
  160. [ 0.690826] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
  161. [ 0.692618] rockchip_interrupts_register:bank_num=7
  162. [ 0.699232] of_get_gpio_init_config:gpio[0] = 256, value = 0
  163. [ 0.699318] of_get_gpio_init_config:gpio[1] = 233, value = 0
  164. [ 0.699400] of_get_gpio_init_config:gpio[2] = 136, value = 0
  165. [ 0.699609] rockchip_pinctrl_probe:init ok
  166. [ 0.719622] rk_iommu ff900800.iep_mmu: (iep) Enter
  167. [ 0.719966] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  168. [ 0.720021] rk_iommu ff900800.iep_mmu: (iep) Initialized
  169. [ 0.720587] rk_iommu ff950800.vip_mmu: (vip) Enter
  170. [ 0.720964] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  171. [ 0.721018] rk_iommu ff950800.vip_mmu: (vip) Initialized
  172. [ 0.721592] rk_iommu ff930300.vopb_mmu: (vopb) Enter
  173. [ 0.721919] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  174. [ 0.721973] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
  175. [ 0.722522] rk_iommu ff940300.vopl_mmu: (vopl) Enter
  176. [ 0.722843] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  177. [ 0.722897] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
  178. [ 0.723475] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
  179. [ 0.723855] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  180. [ 0.723908] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
  181. [ 0.724461] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
  182. [ 0.724784] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  183. [ 0.724838] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
  184. [ 0.725422] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
  185. [ 0.725801] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  186. [ 0.725853] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
  187. [ 0.731579] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  188. [ 0.731636] hw-breakpoint: maximum watchpoint size is 4 bytes.
  189. [ 0.732254] DDR DEBUG: version 1.00 20140603
  190. [ 0.732336] DDR DEBUG: Channel a:
  191. [ 0.732373] DDR DEBUG: DDR3 Device
  192. [ 0.732422] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
  193. [ 0.732465] DDR DEBUG: Channel b:
  194. [ 0.732496] DDR DEBUG: DDR3 Device
  195. [ 0.732541] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
  196. [ 0.732584] DDR DEBUG: addr=0xd6a000
  197. [ 0.732623] DDR DEBUG: stride=9, size=256, halfcap=40000000
  198. [ 0.732663] DDR DEBUG: socAddr[0]=0xd6a000, socAddr[1]=0xd6a100
  199. [ 0.732704] DDR DEBUG: chAddr[0]=0xd6a000, chAddr[1]=0xd6a000
  200. [ 0.732749] DDR DEBUG: dtar[0]=0x201ad000, dtar[1]=0x201ad000
  201. [ 0.732908] DDR DEBUG: init success!!! freq=200MHz
  202. [ 0.732944] DDR DEBUG: Channel a:
  203. [ 0.732993] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  204. [ 0.733053] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  205. [ 0.733112] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  206. [ 0.733170] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  207. [ 0.733223] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  208. [ 0.733266] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
  209. [ 0.733306] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  210. [ 0.733340] DDR DEBUG: Channel b:
  211. [ 0.733387] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  212. [ 0.733446] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  213. [ 0.733504] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  214. [ 0.733563] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  215. [ 0.733616] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  216. [ 0.733658] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
  217. [ 0.733697] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  218. [ 0.809866] bio: create slab <bio-0> at 0
  219. [ 0.811768] Enter firefly_noatx8_init
  220. [ 0.812241] firefly_noatx8_probe 51
  221. [ 0.812967] SCSI subsystem initialized
  222. [ 0.813468] usbcore: registered new interface driver usbfs
  223. [ 0.813622] usbcore: registered new interface driver hub
  224. [ 0.813914] usbcore: registered new device driver usb
  225. [ 0.816920] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
  226. [ 0.821395] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
  227. [ 0.822879] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
  228. [ 0.824355] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
  229. [ 0.825180] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
  230. [ 0.828049] media: Linux media interface: v0.10
  231. [ 0.828192] Linux video capture interface: v2.00
  232. [ 0.828346] pps_core: LinuxPPS API ver. 1 registered
  233. [ 0.828389] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  234. [ 0.828470] PTP clock support registered
  235. [ 0.828910] rockchip_temp_probe,line=362
  236. [ 0.829724] tsadc ff280000.tsadc: initialized
  237. [ 0.831013] rockchip_ion_parse_dt: num_heaps = 1
  238. [ 0.831075] 0: 0 3 vmalloc 0x (null)
  239. [ 0.831889] Rockchip ion module is successfully loaded (v1.0)
  240. [ 0.832415] Advanced Linux Sound Architecture Driver Initialized.
  241. [ 0.833642] Bluetooth: Core ver 2.16
  242. [ 0.833770] NET: Registered protocol family 31
  243. [ 0.833815] Bluetooth: HCI device and connection manager initialized
  244. [ 0.833875] Bluetooth: HCI socket layer initialized
  245. [ 0.833927] Bluetooth: L2CAP socket layer initialized
  246. [ 0.834021] Bluetooth: SCO socket layer initialized
  247. [ 0.834688] cfg80211: Calling CRDA to update world regulatory domain
  248. [ 0.836959] act8846_i2c_probe,line=898
  249. [ 0.838369] act8846_parse_dt,line=746
  250. [ 0.839924] act8846_i2c_probe: act8846_pmic_hold=1
  251. [ 0.839994] act8846_i2c_probe: act8846_pmic_sleep=1
  252. [ 0.840051] act8846_i2c_probe: act8846_pmic_cpu_det_gpio=1
  253. [ 0.840109] act8846_i2c_probe: act8846_pmic_usb_hub_reset_gpio=1
  254. [ 0.842602] act_dcdc1: 1200 mV
  255. [ 0.846316] vccio: 3300 mV
  256. [ 0.848927] vdd_logic: 700 <--> 1500 mV at 1125 mV
  257. [ 0.852641] act_dcdc4: 2000 mV
  258. [ 0.854475] vccio_sd: 1800 <--> 3300 mV at 3300 mV
  259. [ 0.857391] act_ldo2: 1050 mV
  260. [ 0.860280] act_ldo3: 1800 mV
  261. [ 0.863202] act_ldo4: 3300 mV
  262. [ 0.866074] act_ldo5: 3300 mV
  263. [ 0.868963] act_ldo6: 1100 mV
  264. [ 0.871840] vcc_18: 1800 mV
  265. [ 0.874776] act_ldo8: 1850 mV
  266. [ 0.881305] vdd_arm: 712 <--> 1500 mV at 1100 mV
  267. [ 0.887696] vdd_gpu: 712 <--> 1500 mV at 900 mV
  268. [ 0.888719] rk808_i2c_probe,line=1368
  269. [ 0.890383] The device is not rk808 -11
  270. [ 0.890648] rk808: probe of 0-001b failed with error -11
  271. [ 0.895130] Switching to clocksource arch_sys_counter
  272. [ 0.961798] rk-fb rockchip-fb: rk fb ion client create success!
  273. [ 0.961871] rk-fb rockchip-fb: rockchip framebuffer driver probe
  274. [ 0.962973] rk-screen rk_screen.9: rockchip screen probe success
  275. [ 0.963745] rk32-lvds rk32-lvds: rk32 lvds driver probe success
  276. [ 0.964543] rk32-edp ff970000.edp: screen is not edp!
  277. [ 0.964617] rk32-edp: probe of ff970000.edp failed with error -22
  278. [ 0.965747] rk3288-lcdc lcdc0: can't find power_ctr node for lcdc0
  279. [ 0.966551] graphics fb0: rockchip framebuffer registerd:fb0
  280. [ 0.967610] graphics fb1: rockchip framebuffer registerd:fb1
  281. [ 0.968140] graphics fb2: rockchip framebuffer registerd:fb2
  282. [ 0.968681] graphics fb3: rockchip framebuffer registerd:fb3
  283. [ 0.969230] graphics fb4: rockchip framebuffer registerd:fb4
  284. [ 0.970898] rk_iommu ff930300.vopb_mmu: (vopb) Enabled
  285. [ 0.971326] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
  286. [ 0.971398] rk3288-lcdc lcdc0: wakeup from standby!
  287. [ 1.105520] alloc_buffer:ion_phy_addr=0x10000000
  288. [ 1.148854] fb0:phy:10000000>>vir:f0191000>>len:0x1800000
  289. [ 1.263812] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu enabled
  290. [ 1.264967] rockchip_set_mux:warning ignore bank num 15
  291. [ 1.265404] rockchip_set_mux:warning ignore bank num 15
  292. [ 1.265798] rockchip_set_mux:warning ignore bank num 15
  293. [ 1.266194] rockchip_set_mux:warning ignore bank num 15
  294. [ 1.266579] rockchip_set_mux:warning ignore bank num 15
  295. [ 1.266958] rockchip_set_mux:warning ignore bank num 15
  296. [ 1.267862] rockchip_set_mux:warning ignore bank num 15
  297. [ 1.268385] rockchip_set_mux:warning ignore bank num 15
  298. [ 1.269229] rockchip_set_mux:warning ignore bank num 15
  299. [ 1.269724] rockchip_set_mux:warning ignore bank num 15
  300. [ 1.270551] rockchip_set_mux:warning ignore bank num 15
  301. [ 1.271044] rockchip_set_mux:warning ignore bank num 15
  302. [ 1.271916] rockchip_set_mux:warning ignore bank num 15
  303. [ 1.272421] rockchip_set_mux:warning ignore bank num 15
  304. [ 1.276777] NET: Registered protocol family 2
  305. [ 1.278253] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  306. [ 1.278741] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  307. [ 1.279314] TCP: Hash tables configured (established 8192 bind 8192)
  308. [ 1.279474] TCP: reno registered
  309. [ 1.279530] UDP hash table entries: 512 (order: 2, 16384 bytes)
  310. [ 1.279663] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  311. [ 1.280312] NET: Registered protocol family 1
  312. [ 1.280921] Unpacking initramfs...
  313. [ 1.505020] Freeing initrd memory: 1152K (c4bf0000 - c4d10000)
  314. [ 1.506959] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
  315. [ 1.508377] probe device ff9a0000.vpu_service
  316. [ 1.508802] vpu_service: power on
  317. [ 1.509956] checking hw id 4831
  318. [ 1.511049] vpu_service set to auto frequency mode
  319. [ 1.511216] vcodec vpu_service: vcodec ion client create success!
  320. [ 1.512315] rk_iommu ff9a0800.vpu_mmu: (vpu) Enabled
  321. [ 1.512421] rk_iommu ff9a0800.vpu_mmu: (vpu) Disabled
  322. [ 1.512474] rk_iommu ff9a0800.vpu_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e26e000
  323. [ 1.512522] vpu_service: power off...
  324. [ 1.512607] done
  325. [ 1.512639] init success
  326. [ 1.512802] probe device ff9c0000.hevc_service
  327. [ 1.513404] hevc_service: power on
  328. [ 1.514526] checking hw id 6867
  329. [ 1.515425] vcodec hevc_service: vcodec ion client create success!
  330. [ 1.516332] rk_iommu ff9c0440.hevc_mmu: (hevc) Enabled
  331. [ 1.516436] rk_iommu ff9c0440.hevc_mmu: (hevc) Disabled
  332. [ 1.516487] rk_iommu ff9c0440.hevc_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e26c000
  333. [ 1.516534] hevc_service: power off...
  334. [ 1.516621] done
  335. [ 1.516652] init success
  336. [ 1.517003] rknandbase v1.0 2014-03-31
  337. [ 1.517620] rknand_probe clk rate = 148500000
  338. [ 1.518000] rknand_driver:ret = 0
  339. [ 1.519106] audit: initializing netlink socket (disabled)
  340. [ 1.519220] type=2000 audit(1.000:1): initialized
  341. [ 1.521517] bounce pool size: 64 pages
  342. [ 1.537294] fuse init (API version 7.22)
  343. [ 1.538553] msgmni has been set to 1456
  344. [ 1.544853] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  345. [ 1.544915] io scheduler noop registered
  346. [ 1.544954] io scheduler deadline registered
  347. [ 1.545298] io scheduler cfq registered (default)
  348. [ 1.547602] rga ff920000.rga: rga ion client create success!
  349. [ 1.548046] rga: Driver loaded succesfully
  350. [ 1.549446] IEP Power ON
  351. [ 1.549561] iep ion client create success!
  352. [ 1.550529] rk_iommu ff900800.iep_mmu: (iep) Enabled
  353. [ 1.550621] IEP Power OFF
  354. [ 1.550669] rk_iommu ff900800.iep_mmu: (iep) Disabled
  355. [ 1.550722] rk_iommu ff900800.iep_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e261000
  356. [ 1.550784] IEP Driver loaded succesfully
  357. [ 1.551073] Module initialized.
  358. [ 1.553413] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
  359. [ 1.553484] dma-pl330 ffb20000.pdma: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
  360. [ 1.557909] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
  361. [ 1.557981] dma-pl330 ff250000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  362. [ 1.558710] pwm-voltage-regulator pwm_regulator.23: unable to request PWM, trying legacy API
  363. [ 1.558774] pwm-voltage-regulator pwm_regulator.23: unable to request legacy PWM
  364. [ 1.558817] pwm_regulator_probe:error
  365. [ 1.558890] platform pwm_regulator.23: Driver pwm-voltage-regulator requests probe deferral
  366. [ 1.559975] rk_serial.c v1.8 2014-03-04
  367. [ 1.560614] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
  368. [ 1.561280] serial ff180000.serial: membase 0xf0172000
  369. [ 1.571065] loop: module loaded
  370. [ 1.572857] SCSI Media Changer driver v0.25
  371. [ 1.573832] tun: Universal TUN/TAP device driver, 1.6
  372. [ 1.573881] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  373. [ 1.575557] stmmac_probe_config_dt: Can not read property: pmu_regulator.
  374. [ 1.575613] stmmac_probe_config_dt: Can not read property: pmu_enable_level.
  375. [ 1.575662] stmmac_probe_config_dt: clock input or output? (input).
  376. [ 1.575707] stmmac_probe_config_dt: TX delay(0x30).
  377. [ 1.575747] stmmac_probe_config_dt: RX delay(0x10).
  378. [ 1.575869] stmmac_probe_config_dt: is rockchip,rk3288-gmac
  379. [ 1.575909] stmmc_pltfr_init:
  380. [ 1.575945] stmmc_pltfr_init: ERROR: Get power-gpio failed.
  381. [ 1.576020] stmmc_pltfr_init: ERROR: Request gmac phy reset pin failed.
  382. [ 1.576059] stmmc_pltfr_init: init for RGMII
  383. [ 1.576098] tx delay=0x30
  384. [ 1.576098] rx delay=0x10
  385. [ 1.577523] stmmac - user ID: 0x10, Synopsys ID: 0x35
  386. [ 1.577561] Normal descriptors
  387. [ 1.577593] Ring mode enabled
  388. [ 1.577626] DMA HW capability register supported
  389. [ 1.577664] RX Checksum Offload Engine supported (type 2)
  390. [ 1.577702] TX Checksum insertion supported
  391. [ 1.577735] Wake-Up On Lan supported
  392. [ 1.577865] Enable RX Mitigation via HW Watchdog Timer
  393. [ 1.579135] PPP generic driver version 2.4.2
  394. [ 1.579586] PPP BSD Compression module registered
  395. [ 1.579646] PPP Deflate Compression module registered
  396. [ 1.579710] PPP MPPE Compression module registered
  397. [ 1.579754] NET: Registered protocol family 24
  398. [ 1.579849] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  399. [ 1.579898] CSLIP: code copyright 1989 Regents of the University of California.
  400. [ 1.579943] Rockchip WiFi SYS interface (V1.00) ...
  401. [ 1.580186] usbcore: registered new interface driver catc
  402. [ 1.580317] usbcore: registered new interface driver kaweth
  403. [ 1.580363] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  404. [ 1.580491] usbcore: registered new interface driver pegasus
  405. [ 1.580618] usbcore: registered new interface driver rtl8150
  406. [ 1.580743] usbcore: registered new interface driver r8152
  407. [ 1.580783] hso: drivers/net/usb/hso.c: Option Wireless
  408. [ 1.581001] usbcore: registered new interface driver hso
  409. [ 1.581151] usbcore: registered new interface driver asix
  410. [ 1.581280] usbcore: registered new interface driver ax88179_178a
  411. [ 1.581407] usbcore: registered new interface driver cdc_ether
  412. [ 1.581533] usbcore: registered new interface driver cdc_eem
  413. [ 1.581658] usbcore: registered new interface driver dm9601
  414. [ 1.581781] usbcore: registered new interface driver dm9620
  415. [ 1.581951] usbcore: registered new interface driver smsc75xx
  416. [ 1.582109] usbcore: registered new interface driver smsc95xx
  417. [ 1.582237] usbcore: registered new interface driver gl620a
  418. [ 1.582365] usbcore: registered new interface driver net1080
  419. [ 1.582493] usbcore: registered new interface driver plusb
  420. [ 1.582625] usbcore: registered new interface driver rndis_host
  421. [ 1.582767] usbcore: registered new interface driver cdc_subset
  422. [ 1.582895] usbcore: registered new interface driver zaurus
  423. [ 1.583030] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  424. [ 1.583214] usbcore: registered new interface driver int51x1
  425. [ 1.583357] usbcore: registered new interface driver kalmia
  426. [ 1.583491] usbcore: registered new interface driver ipheth
  427. [ 1.583634] usbcore: registered new interface driver sierra_net
  428. [ 1.583767] usbcore: registered new interface driver cx82310_eth
  429. [ 1.583937] usbcore: registered new interface driver cdc_ncm
  430. [ 1.584175] usbcore: registered new interface driver qmi_wwan
  431. [ 1.584328] usbcore: registered new interface driver cdc_mbim
  432. [ 1.584373] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  433. [ 1.587598] ehci_rk_probe f1a00000 f1a00010
  434. [ 1.587657] rockchip_ehci_host ff500000.usb: Rockchip On-Chip EHCI Host Controller
  435. [ 1.587755] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
  436. [ 1.588788] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
  437. [ 1.603855] rockchip_ehci_host ff500000.usb: USB 0.0 started, EHCI 1.00
  438. [ 1.604136] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  439. [ 1.604199] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  440. [ 1.604253] usb usb1: Product: Rockchip On-Chip EHCI Host Controller
  441. [ 1.604303] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
  442. [ 1.604350] usb usb1: SerialNumber: ff500000.usb
  443. [ 1.605703] hub 1-0:1.0: USB hub found
  444. [ 1.605783] hub 1-0:1.0: 1 port detected
  445. [ 1.633342] ehci_rk_probe ok
  446. [ 1.633826] usbcore: registered new interface driver cdc_acm
  447. [ 1.633875] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  448. [ 1.634063] usbcore: registered new interface driver usblp
  449. [ 1.634210] usbcore: registered new interface driver cdc_wdm
  450. [ 1.634415] usbcore: registered new interface driver usb-storage
  451. [ 1.634548] usbcore: registered new interface driver ums-alauda
  452. [ 1.634679] usbcore: registered new interface driver ums-cypress
  453. [ 1.634808] usbcore: registered new interface driver ums-datafab
  454. [ 1.634948] usbcore: registered new interface driver ums_eneub6250
  455. [ 1.635076] usbcore: registered new interface driver ums-freecom
  456. [ 1.635203] usbcore: registered new interface driver ums-isd200
  457. [ 1.635330] usbcore: registered new interface driver ums-jumpshot
  458. [ 1.635456] usbcore: registered new interface driver ums-karma
  459. [ 1.635584] usbcore: registered new interface driver ums-onetouch
  460. [ 1.635714] usbcore: registered new interface driver ums-sddr09
  461. [ 1.635842] usbcore: registered new interface driver ums-sddr55
  462. [ 1.635968] usbcore: registered new interface driver ums-usbat
  463. [ 1.636264] usbcore: registered new interface driver usbserial
  464. [ 1.636398] usbcore: registered new interface driver usbserial_generic
  465. [ 1.636512] usbserial: USB Serial support registered for generic
  466. [ 1.636647] usbcore: registered new interface driver option
  467. [ 1.636756] usbserial: USB Serial support registered for GSM modem (1-port)
  468. [ 1.636992] usbcore: registered new interface driver trancevibrator
  469. [ 1.637038] usb20_otg: version 3.10a 21-DEC-2012
  470. [ 1.638068] f1a80040
  471. [ 1.638113] Core Release: 3.10a
  472. [ 1.638150] Setting default values for core params
  473. [ 1.638582] Using Buffer DMA mode
  474. [ 1.638625] Periodic Transfer Interrupt Enhancement - disabled
  475. [ 1.638664] Multiprocessor Interrupt Enhancement - disabled
  476. [ 1.638706] OTG VER PARAM: 0, OTG VER FLAG: 0
  477. [ 1.638742] ^^^^^^^^^^^^^^^^^Device Mode
  478. [ 1.638785] Dedicated Tx FIFOs mode
  479. [ 1.638842] pcd_init otg_dev = ed955cc0
  480. [ 1.639318] usb20_otg ff580000.usb: DWC OTG Controller
  481. [ 1.639413] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
  482. [ 1.639531] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
  483. [ 1.639726] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  484. [ 1.639786] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  485. [ 1.639837] usb usb2: Product: DWC OTG Controller
  486. [ 1.639882] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
  487. [ 1.639928] usb usb2: SerialNumber: ff580000.usb
  488. [ 1.641261] hub 2-0:1.0: USB hub found
  489. [ 1.641340] hub 2-0:1.0: 1 port detected
  490. [ 1.642264] usb20_host: version 3.10a 21-DEC-2012
  491. [ 1.645753] f1b00040
  492. [ 1.645800] Core Release: 3.10a
  493. [ 1.645837] Setting default values for core params
  494. [ 1.646251] Using Buffer DMA mode
  495. [ 1.646293] Periodic Transfer Interrupt Enhancement - disabled
  496. [ 1.646332] Multiprocessor Interrupt Enhancement - disabled
  497. [ 1.646374] OTG VER PARAM: 0, OTG VER FLAG: 0
  498. [ 1.646410] ^^^^^^^^^^^^^^^^^^Host Mode
  499. [ 1.646489] usb20_host ff540000.usb: DWC OTG Controller
  500. [ 1.646579] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
  501. [ 1.646682] usb20_host ff540000.usb: irq 57, io mem 0x00000000
  502. [ 1.646846] Init: Power Port (0)
  503. [ 1.647039] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  504. [ 1.647100] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  505. [ 1.647153] usb usb3: Product: DWC OTG Controller
  506. [ 1.647198] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
  507. [ 1.647244] usb usb3: SerialNumber: ff540000.usb
  508. [ 1.648592] hub 3-0:1.0: USB hub found
  509. [ 1.648669] hub 3-0:1.0: 1 port detected
  510. [ 1.650302] .. rk pwm remotectl v1.0 init
  511. [ 1.650548] remotectl probe j=0x0
  512. [ 1.651104] input: ff680000.pwm as /devices/ff680000.pwm/input/input0
  513. [ 1.651664] pwm enable val=0x646205
  514. [ 1.652497] usbcore: registered new interface driver xpad
  515. [ 1.652674] usbcore: registered new interface driver usb_acecad
  516. [ 1.652824] usbcore: registered new interface driver aiptek
  517. [ 1.653040] usbcore: registered new interface driver gtco
  518. [ 1.653202] usbcore: registered new interface driver hanwang
  519. [ 1.653350] usbcore: registered new interface driver kbtab
  520. [ 1.653516] usbcore: registered new interface driver wacom
  521. [ 1.654646] sensor_register_slave:mma8452,id=17
  522. [ 1.654702] sensor_register_slave:cm3217,id=44
  523. [ 1.654746] sensor_register_slave:cm3218,id=45
  524. [ 1.661472] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
  525. [ 1.661638] i2c /dev entries driver
  526. [ 1.663939] IR NEC protocol handler initialized
  527. [ 1.663988] IR RC5(x) protocol handler initialized
  528. [ 1.664025] IR RC6 protocol handler initialized
  529. [ 1.664059] IR JVC protocol handler initialized
  530. [ 1.664094] IR Sony protocol handler initialized
  531. [ 1.664129] IR RC5 (streamzap) protocol handler initialized
  532. [ 1.664165] IR SANYO protocol handler initialized
  533. [ 1.664202] IR MCE Keyboard/mouse protocol handler initialized
  534. [ 1.664455] usbcore: registered new interface driver uvcvideo
  535. [ 1.664498] USB Video Class driver (1.1.1)
  536. [ 1.664544] CamSys driver version: v0.19.0, CamSys head file version: v0.8.0
  537. [ 1.667747] D1:camsys_platform_probe(1061): 1-gpios-cifpower: gpio=236
  538. [ 1.667834] D1:camsys_platform_probe(1064): gpios-cifpower: gpio_request
  539. [ 1.667899] D1:camsys_platform_probe(1066): 1-gpios-cifpower: gpio_request=0
  540. [ 1.667963] D1:camsys_platform_probe(1075): gpios-cifpower: 236 high
  541. [ 1.668175] D1:camsys_mipiphy_probe_cb(163): ff910000.isp mipi phy0 probe success(reg_phy: 0x0 reg_vir: 0x0 size: 0x0)
  542. [ 1.668639] D1:camsys_mipiphy_probe_cb(160): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000 reg_vir: 0xf19b0000 size: 0x4000)
  543. [ 1.670738] D1:camsys_platform_probe(1208): ff910000.isp memory:
  544. [ 1.670803] D1:camsys_platform_probe(1218): Register memory (phy: 0xff910000 vir: 0xf19e0000 size: 0x10000)
  545. [ 1.670863] D1:camsys_platform_probe(1213): I2c memory (phy: 0x2d934000 vir: 0xed934000 size: 0x1000)
  546. [ 1.670916] D1:camsys_platform_probe(1233): Probe ff910000.isp device success
  547. [ 1.673949] device-mapper: uevent: version 1.0.3
  548. [ 1.674689] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  549. [ 1.675611] Bluetooth: HCI UART driver ver 2.2
  550. [ 1.675660] Bluetooth: HCI H4 protocol initialized
  551. [ 1.675699] Bluetooth: HCILL protocol initialized
  552. [ 1.681674] cpufreq version 1.0, suspend freq 1200 MHz
  553. [ 1.682249] cpuidle: using governor ladder
  554. [ 1.682293] cpuidle: using governor menu
  555. [ 1.682410] Synopsys Designware Multimedia Card Interface Driver
  556. [ 1.683244] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
  557. [ 1.684112] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
  558. [ 1.684590] 3230..dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
  559. [ 1.684645] Line3235..dw_mci_init_slot: The rk_sdmmc Ver 1.12 2014-07-08
  560. [ 1.685026] 1357..dw_mci_set_ios: no card. [mmc0]
  561. [ 1.702172] 1357..dw_mci_set_ios: no card. [mmc0]
  562. [ 1.721897] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
  563. [ 1.721939] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
  564. [ 1.721965] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
  565. [ 1.722323] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
  566. [ 1.723079] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
  567. [ 1.723265] 3224..dw_mci_init_slot: fmin=300000, fmax=50000000 [mmc1]
  568. [ 1.723814] 1357..dw_mci_set_ios: no card. [mmc1]
  569. [ 1.741532] 1357..dw_mci_set_ios: no card. [mmc1]
  570. [ 1.754049] mmc0: BKOPS_EN bit is not set
  571. [ 1.755974] rk_sdmmc: BOOT Bus speed=0Hz,Bus width=8bits.[mmc0]
  572. [ 1.758286] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
  573. [ 1.758315] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
  574. [ 1.761359] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
  575. [ 1.761379] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
  576. [ 1.761735] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
  577. [ 1.761964] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
  578. [ 1.762115] 3230..dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
  579. [ 1.762234] 1357..dw_mci_set_ios: no card. [mmc2]
  580. [ 1.773343] rk_sdmmc: BOOT
  581. [ 1.773343] execute tuning: candidates_degree = SDMMC_SHIFT_DEGREE_0 SDMMC_SHIFT_DEGREE_90 SDMMC_SHIFT_DEGREE_INVALID SDMMC_SHIFT_DEGREE_INVALID[mmc0]
  582. [ 1.773448] mmc0: new HS200 MMC card at address 0001
  583. [ 1.773702] mmcblk0: mmc0:0001 AWMB3R 14.5 GiB
  584. [ 1.774021] uboot: 0x000400000 -- 0x000800000 (4 MB)
  585. [ 1.774033] misc: 0x000800000 -- 0x000c00000 (4 MB)
  586. [ 1.774042] resource: 0x000c00000 -- 0x001c00000 (16 MB)
  587. [ 1.774051] kernel: 0x001c00000 -- 0x002c00000 (16 MB)
  588. [ 1.774060] boot: 0x002c00000 -- 0x004c00000 (32 MB)
  589. [ 1.774069] recovery: 0x004c00000 -- 0x006c00000 (32 MB)
  590. [ 1.774077] backup: 0x006c00000 -- 0x00a000000 (52 MB)
  591. [ 1.774086] cache: 0x00a000000 -- 0x012000000 (128 MB)
  592. [ 1.774095] kpanic: 0x012000000 -- 0x012400000 (4 MB)
  593. [ 1.774103] system: 0x012400000 -- 0x042400000 (768 MB)
  594. [ 1.774112] metadata: 0x042400000 -- 0x042800000 (4 MB)
  595. [ 1.774121] userdata: 0x042800000 -- 0x082800000 (1024 MB)
  596. [ 1.774129] radical_update: 0x082800000 -- 0x086800000 (64 MB)
  597. [ 1.774138] user: 0x086800000 -- 0x3a3a00000 (12754 MB)
  598. [ 1.774161] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p141357..dw_mci_set_ios: no card. [mmc1]
  599. [ 1.780882] 1357..dw_mci_set_ios: no card. [mmc2]
  600. [ 1.800566] 1357..dw_mci_set_ios: no card. [mmc2]
  601. [ 1.800774] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
  602. [ 1.800787] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
  603. [ 1.801037] leds-gpio leds.31: pins are not configured from the driver
  604. [ 1.801259] hidraw: raw HID events driver (C) Jiri Kosina
  605. [ 1.802546] usbcore: registered new interface driver usbhid
  606. [ 1.802557] usbhid: USB HID core driver
  607. [ 1.802848] ashmem: initialized
  608. [ 1.802956] logger: created 256K log 'log_main'
  609. [ 1.803048] logger: created 256K log 'log_events'
  610. [ 1.803146] logger: created 256K log 'log_radio'
  611. [ 1.803238] logger: created 256K log 'log_system'
  612. [ 1.804228] input: rk29-keypad as /devices/ff100000.adc/key.34/input/input1
  613. [ 1.804801] rockchip-pinctrl ff770000.pinctrl: pin gpio6-8 already requested by ; cannot claim for 2-0010
  614. [ 1.804817] rockchip-pinctrl ff770000.pinctrl: pin-200 (2-0010) status -22
  615. [ 1.804829] rockchip-pinctrl ff770000.pinctrl: could not request pin 200 on device rockchip-pinctrl
  616. [ 1.804842] ES8323 2-0010: Error applying setting, reverse things back
  617. [ 1.805119] es8323 probe i2c recv ok
  618. [ 1.805343] i2c-core: driver [ES8323] using legacy suspend method
  619. [ 1.805353] i2c-core: driver [ES8323] using legacy resume method
  620. [ 1.805657] rockchip-hdmi-spdif rockchip-hdmi-spdif.27: ASoC: CPU DAI (null) not registered
  621. [ 1.805686] rockchip_hdmi_spdif_audio_probe() register card failed:-517
  622. [ 1.805704] platform rockchip-hdmi-spdif.27: Driver rockchip-hdmi-spdif requests probe deferral
  623. [ 1.805925] es8323_probe
  624. [ 1.806014] es8323_probe:register ISR (irq=194)
  625. [ 2.440523] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> NULL --> Left Line Mux
  626. [ 2.440536] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> NULL -> Left Line Mux
  627. [ 2.440546] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> NULL --> Left Line Mux
  628. [ 2.440555] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> NULL -> Left Line Mux
  629. [ 2.440565] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> NULL --> Left Line Mux
  630. [ 2.440573] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> NULL -> Left Line Mux
  631. [ 2.440583] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> NULL --> Right Line Mux
  632. [ 2.440591] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> NULL -> Right Line Mux
  633. [ 2.440600] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> NULL --> Right Line Mux
  634. [ 2.440607] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> NULL -> Right Line Mux
  635. [ 2.440616] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> NULL --> Right Line Mux
  636. [ 2.440624] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> NULL -> Right Line Mux
  637. [ 2.440634] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left PGA Mux
  638. [ 2.440641] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left PGA Mux
  639. [ 2.440650] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left PGA Mux
  640. [ 2.440658] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left PGA Mux
  641. [ 2.440667] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> LAMP --> Left PGA Mux
  642. [ 2.440674] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> LAMP -> Left PGA Mux
  643. [ 2.440683] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right PGA Mux
  644. [ 2.440691] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right PGA Mux
  645. [ 2.440700] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right PGA Mux
  646. [ 2.440707] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right PGA Mux
  647. [ 2.440716] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> RAMP --> Right PGA Mux
  648. [ 2.440724] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> RAMP -> Right PGA Mux
  649. [ 2.440733] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Differential Mux
  650. [ 2.440741] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Differential Mux
  651. [ 2.440750] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Differential Mux
  652. [ 2.440757] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Differential Mux
  653. [ 2.440766] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Differential Mux
  654. [ 2.440774] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Differential Mux
  655. [ 2.440782] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Differential Mux
  656. [ 2.440790] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Differential Mux
  657. [ 2.440810] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left Line Mux
  658. [ 2.440818] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left Line Mux
  659. [ 2.440827] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left Line Mux
  660. [ 2.440834] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left Line Mux
  661. [ 2.440843] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> LAMP --> Left Line Mux
  662. [ 2.440851] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> LAMP -> Left Line Mux
  663. [ 2.440860] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right Line Mux
  664. [ 2.440869] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right Line Mux
  665. [ 2.440877] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right Line Mux
  666. [ 2.440885] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right Line Mux
  667. [ 2.440894] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> RAMP --> Right Line Mux
  668. [ 2.440902] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> RAMP -> Right Line Mux
  669. [ 2.441038] ES8323 2-0010: ASoC: mux Right Line Mux has no paths
  670. [ 2.441049] ES8323 2-0010: ASoC: mux Left Line Mux has no paths
  671. [ 2.441060] ES8323 2-0010: ASoC: mux Right PGA Mux has no paths
  672. [ 2.441074] ES8323 2-0010: ASoC: mux Left PGA Mux has no paths
  673. [ 2.441095] ES8323 2-0010: ASoC: mux Differential Mux has no paths
  674. [ 2.443969] Enter::rk29_es8323_init----135
  675. [ 2.447314] rockchip-es8323 rockchip-es8323.29: ES8323 HiFi <-> rockchip-i2s.0 mapping ok
  676. [ 2.447846] u32 classifier
  677. [ 2.447854] Actions configured
  678. [ 2.447865] Netfilter messages via NETLINK v0.30.
  679. [ 2.447917] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  680. [ 2.448199] ctnetlink v0.93: registering with nfnetlink.
  681. [ 2.448260] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  682. [ 2.448267] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  683. [ 2.448484] xt_time: kernel timezone is -0000
  684. [ 2.448649] ip_tables: (C) 2000-2006 Netfilter Core Team
  685. [ 2.448766] arp_tables: (C) 2002 David S. Miller
  686. [ 2.448799] TCP: cubic registered
  687. [ 2.448805] Initializing XFRM netlink socket
  688. [ 2.448992] NET: Registered protocol family 10
  689. [ 2.449430] mip6: Mobile IPv6
  690. [ 2.449454] ip6_tables: (C) 2000-2006 Netfilter Core Team
  691. [ 2.449555] sit: IPv6 over IPv4 tunneling driver
  692. [ 2.449841] NET: Registered protocol family 17
  693. [ 2.449863] NET: Registered protocol family 15
  694. [ 2.449908] Bridge firewalling registered
  695. [ 2.449917] Ebtables v2.0 registered
  696. [ 2.450073] Bluetooth: RFCOMM TTY layer initialized
  697. [ 2.450098] Bluetooth: RFCOMM socket layer initialized
  698. [ 2.450105] Bluetooth: RFCOMM ver 1.11
  699. [ 2.450112] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  700. [ 2.450117] Bluetooth: BNEP filters: protocol multicast
  701. [ 2.450127] Bluetooth: BNEP socket layer initialized
  702. [ 2.450134] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  703. [ 2.450144] Bluetooth: HIDP socket layer initialized
  704. [ 2.450166] l2tp_core: L2TP core driver, V2.0
  705. [ 2.450179] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  706. [ 2.450186] [WLAN_RFKILL]: Enter rfkill_wlan_init
  707. [ 2.450384] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  708. [ 2.450393] wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
  709. [ 2.450401] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  710. [ 2.450409] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
  711. [ 2.450416] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
  712. [ 2.450437] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
  713. [ 2.450457] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
  714. [ 2.450465] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  715. [ 2.450489] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
  716. [ 2.450526] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  717. [ 2.450570] [BT_RFKILL]: Enter rfkill_rk_init
  718. [ 2.450692] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
  719. [ 2.450707] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 155.
  720. [ 2.450720] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
  721. [ 2.450732] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
  722. [ 2.450745] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
  723. [ 2.450787] [BT_RFKILL]: Request irq for bt wakeup host
  724. [ 2.450878] [BT_RFKILL]: ** disable irq
  725. [ 2.450946] [BT_RFKILL]: ap6335 device registered.
  726. [ 3.079766] ******** Show Sink Info ********
  727. [ 3.079776] Max tmds clk is 0
  728. [ 3.079782] Support video mode:
  729. [ 3.079787] 1920x1080p@60Hz
  730. [ 3.079792] 1280x720p@60Hz
  731. [ 3.079797] 720x480p@60Hz
  732. [ 3.079801] Support video color mode:
  733. [ 3.079806] RGB
  734. [ 3.079810] YCbCr422
  735. [ 3.079814] YCbCr444
  736. [ 3.079819] Support video color depth:
  737. [ 3.079823] 24bit
  738. [ 3.079828] Support audio type:
  739. [ 3.079832] LPCM
  740. [ 3.079837] Support max audio channel is 2
  741. [ 3.079842] Support audio sample rate:
  742. [ 3.079846] 32000
  743. [ 3.079850] 44100
  744. [ 3.079854] 48000
  745. [ 3.079858] Support audio word lenght:
  746. [ 3.079862] 16bit
  747. [ 3.079867] 20bit
  748. [ 3.079871] 24bit
  749. [ 3.079874]
  750. [ 3.079878] ******** Show Sink Info ********
  751. [ 3.079894]
  752. [ 3.079894] rk_fb_switch_screen lcdc_id 0 type 6 enable 1
  753. [ 3.079906] fb0 win id 1 state 1
  754. [ 3.079927] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
  755. [ 3.079949] fb1 win id 0 state 0
  756. [ 3.079955] fb2 win id 2 state 0
  757. [ 3.079960] fb3 win id 3 state 0
  758. [ 3.079966] fb4 win id 4 state 0
  759. [ 3.079971]
  760. [ 3.079971] rk_fb_switch_screen lcdc_id 0 type 6 enable 1 done
  761. [ 3.079971]
  762. [ 3.079986] pixel clk is 148500000 tmds clk is 148500000
  763. [ 3.080026] rk3288-hdmi ff980000.hdmi: [hdmi_dev_config_video] sucess output HDMI.
  764. [ 3.237570] phy_int 0x3d i2cm_int 0x00 phy_i2cm_int 0x00 cec_int 0x00 aud_int 0x02
  765. [ 3.237580] phy_stat is 0xf3 phy_pol 0xf3 phy_int 0x02
  766. [ 3.237580]
  767. [ 3.237590] new phy pol is 0xfd cur pol is 0xf1
  768. [ 3.237590]
  769. [ 3.237599] audio int is 0x02
  770. [ 3.237607] rk3288-hdmi ff980000.hdmi: rk3288 hdmi probe sucess.
  771. [ 3.237963] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
  772. [ 3.237979] rk3288_init_suspend
  773. [ 3.237986] rk3288_suspend_init enter
  774. [ 3.238130] rk3288_suspend_init: pm_ctrbits =40017
  775. [ 3.238162] gpio_get_dts_info suspend:8
  776. [ 3.238169] gpio_get_dts_info resume:8
  777. [ 3.238173] rockchip,pmic-suspend_gpios:1007c30 1007c40 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  778. [ 3.238199] rockchip,pmic-resume_gpios:2007c32 2007c42 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  779. [ 3.238324] clks_gating_suspend_init:clkgt info ok
  780. [ 3.238409] Registering SWP/SWPB emulation handler
  781. [ 3.238768] ddrfreq: verion 1.2 20140526
  782. [ 3.238779] ddrfreq: normal 456MHz video_1080p 0MHz video_4k 456MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 456MHz
  783. [ 3.238787] ddrfreq: auto-freq=0
  784. [ 3.238793] ddrfreq: auto-freq-table[0] 240MHz
  785. [ 3.238799] ddrfreq: auto-freq-table[1] 324MHz
  786. [ 3.238804] ddrfreq: auto-freq-table[2] 456MHz
  787. [ 3.238809] ddrfreq: auto-freq-table[3] 528MHz
  788. [ 3.240384] act_ldo3: operation not allowed
  789. [ 3.240622] vga_edid_probe: turn on ldo3 done.
  790. [ 3.240649] act_ldo4: operation not allowed
  791. [ 3.240880] vga_edid_probe: turn on ldo done.
  792. [ 3.240903] act_ldo2: operation not allowed
  793. [ 3.241132] vga_edid_probe: turn on ldo2 done.
  794. [ 3.241153] act_ldo8: operation not allowed
  795. [ 3.241382] vga_edid_probe: turn on ldo done.
  796. [ 3.246422] unable to read EDID block.
  797. [ 3.280966] unable to read EDID block.
  798. [ 3.315510] unable to read EDID block.
  799. [ 3.315519] vga-ddc: read and parse edid failed errno:-5.
  800. [ 3.315525] vga_edid_probe: success. 10
  801. [ 3.315630] firefly_vga_get_enable 180, 0
  802. [ 3.315638] firefly_vga_get_status 186
  803. [ 3.315645] firefly_vga_set_enable 159 enable:0
  804. [ 3.315688] regulator-dummy: disabling
  805. [ 3.315979] rockchip-hdmi-spdif rockchip-hdmi-spdif.27: ASoC: CPU DAI (null) not registered
  806. [ 3.316003] rockchip_hdmi_spdif_audio_probe() register card failed:-517
  807. [ 3.316016] platform rockchip-hdmi-spdif.27: Driver rockchip-hdmi-spdif requests probe deferral
  808. [ 3.316093] pcd_pullup, is_on 0
  809. [ 3.316130] file system registered
  810. [ 3.316638] android_usb gadget: Mass Storage Function, version: 2009/09/11
  811. [ 3.316646] android_usb gadget: Number of LUNs=2
  812. [ 3.316653] lun0: LUN: removable file: (no medium)
  813. [ 3.316660] lun1: LUN: removable file: (no medium)
  814. [ 3.316773] android_usb gadget: android_usb ready
  815. [ 3.316843] sensor_init: Probe name sensors
  816. [ 3.316858] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
  817. [ 3.317385] rtc_hym8563 0-0051: setting system clock to 2011-01-01 12:21:35 UTC (1293884495)
  818. [ 3.322734] usbcore: registered new interface driver snd-usb-audio
  819. [ 3.322753] ALSA device list:
  820. [ 3.322759] #0: RK_ES8323
  821. [ 3.324117] Freeing unused kernel memory: 2364K (c0a77000 - c0cc6000)
  822. [ 3.324493] rockchip-hdmi-spdif rockchip-hdmi-spdif.27: rk-hdmi-spdif-hifi <-> rockchip-spdif mapping ok
  823. [ 3.328698] SELinux: Permission attach_queue in class tun_socket not defined in policy.
  824. [ 3.328711] SELinux: the above unknown classes and permissions will be denied
  825. [ 3.515699] type=1403 audit(1293884495.690:2): policy loaded auid=4294967295 ses=4294967295
  826. [ 3.515797] SELinux: Loaded policy from /sepolicy
  827. [ 3.517212] type=1404 audit(1293884495.690:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  828. [ 3.620940] dwc_otg_hcd_enable, enable host controller
  829. [ 3.753786] Using Buffer DMA mode
  830. [ 3.753795] Periodic Transfer Interrupt Enhancement - disabled
  831. [ 3.753801] Multiprocessor Interrupt Enhancement - disabled
  832. [ 3.753807] OTG VER PARAM: 0, OTG VER FLAG: 0
  833. [ 3.753812] ^^^^^^^^^^^^^^^^^^Host Mode
  834. [ 3.798159] Init: Power Port (0)
  835. [ 4.172020] Indeed it is in host mode hprt0 = 00021501
  836. [ 4.349140] usb 3-1: new high-speed USB device number 2 using usb20_host
  837. [ 4.349210] Indeed it is in host mode hprt0 = 00001101
  838. [ 4.386932] init: init.rk30board.bootmode.emmc.rc: 8: invalid command '/devices/ff0f0000.rksdmmc/mmc_host/mmc'
  839. [ 4.386950] init: init.rk30board.bootmode.emmc.rc: 9: invalid command '/devices/ff0c0000.rksdmmc/mmc_host/mmc'
  840. [ 4.386962] init: init.rk30board.bootmode.emmc.rc: 10: invalid command '/devices/ff580000.usb'
  841. [ 4.386973] init: init.rk30board.bootmode.emmc.rc: 11: invalid command '/devices/ff580000.usb'
  842. [ 4.386983] init: init.rk30board.bootmode.emmc.rc: 12: invalid command '/devices/ff500000.usb'
  843. [ 4.386992] init: init.rk30board.bootmode.emmc.rc: 13: invalid command '/devices/ff500000.usb'
  844. [ 4.387002]shell@rk3288:/ $ init: init.rk30board.bootmode.emmc.rc: 14: invalid command '/devices/ff540000.usb'
  845. [ 4.387012] init: init.rk30board.bootmode.emmc.rc: 15: invalid command '/devices/ff540000.usb'
  846. [ 4.387294] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  847. [ 4.437736] init: /dev/hw_random not found
  848. [ 4.437794] keychord: using input dev ff680000.pwm for fevent
  849. [ 4.437803] keychord: using input dev rk29-keypad for fevent
  850. [ 4.442697] fs_mgr: parse_link_device : path = NULL
  851. [ 4.442722] fs_mgr: parse_link_device : path = NULL
  852. [ 4.442740] fs_mgr: parse_link_device : path = NULL
  853. [ 4.442755] fs_mgr: parse_link_device : path = NULL
  854. [ 4.442771] fs_mgr: parse_link_device : path = NULL
  855. [ 4.442786] fs_mgr: parse_link_device : path = NULL
  856. [ 4.442801] fs_mgr: parse_link_device : path = NULL
  857. [ 4.442816] fs_mgr: parse_link_device : path = NULL
  858. [ 4.442870] fs_mgr: ---------------resize_fs blk_dev /dev/block/platform/ff0f0000.rksdmmc/by-name/system, type ext4fs_mgr: Running /sbin/resize2fs on /dev/block/platform/ff0f0000.rksdmmc/by-name/system
  859. [ 4.443684] resize2fs: resize2fs 1.41.14 (22-Dec-2010)resize2fs: The filesystem is already 196608 blocks long. Nothing to do!resize2fs:
  860. [ 4.449569] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  861. [ 4.452735] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
  862. [ 4.454954] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
  863. [ 4.459362] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
  864. [ 4.464591] drmboot: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
  865. [ 4.469709] mali pd enabled
  866. [ 4.469723] clk enabled
  867. [ 4.469732] MALI_DVFS_STEP=4,div_dvfs=10
  868. [ 4.469738] mali_dvfs_infotbl[0].clock=198000,min_threshold=0,max_threshold=70
  869. [ 4.469746] mali_dvfs_infotbl[1].clock=297000,min_threshold=70,max_threshold=80
  870. [ 4.469753] mali_dvfs_infotbl[2].clock=417000,min_threshold=80,max_threshold=90
  871. [ 4.469760] mali_dvfs_infotbl[3].clock=480000,min_threshold=94,max_threshold=100
  872. [ 4.469847] turn on mali power
  873. [ 4.469868] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
  874. [ 4.470235] mali ffa30000.gpu: Probed as mali0
  875. [ 4.472536] rk29_ipp: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
  876. [ 4.482980] init: /dev/hw_random not found
  877. [ 4.489789] binder: 135:135 transaction failed 29189, size 0-0
  878. [ 4.490343] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'
  879. [ 4.492707] init: cannot find '/system/bin/rild3', disabling 'ril-daemon3'
  880. [ 4.494240] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  881. [ 4.495752] init: cannot find '/system/bin/chrome.sh', disabling 'chrome'
  882. [ 4.496092] init: cannot find '/system/bin/bplus_helper', disabling 'bplus_helper'
  883. [ 4.499514] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
  884. [ 4.499531] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
  885. [ 4.499679] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
  886. [ 4.546188] usb 3-1: New USB device found, idVendor=1a40, idProduct=0101
  887. [ 4.546203] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  888. [ 4.546212] usb 3-1: Product: USB 2.0 Hub [MTT]
  889. [ 4.546585] hub 3-1:1.0: USB hub found
  890. [ 4.546639] hub 3-1:1.0: 4 ports detected
  891. [ 4.564652] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
  892. [ 4.567931] firefly_vga_get_enable 180, 0
  893. [ 4.567983] firefly_vga_get_status 186
  894. [ 4.568612] firefly_vga_set_enable 159 enable:0
  895. [ 4.683955] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
  896. [ 4.683970] init: powerctl: cannot expand '${sys.powerctl}'
  897. [ 4.683982] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
  898. [ 4.683992] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
  899. [ 4.684821] android_usb: already disabled
  900. [ 4.686441] read descriptors
  901. [ 4.686454] read strings
  902. [ 4.686481] pcd_pullup, is_on 1
  903. [ 5.012109] fs_mgr: parse_link_device : path = NULL
  904. [ 5.012139] fs_mgr: parse_link_device : path = NULL
  905. [ 5.012160] fs_mgr: parse_link_device : path = NULL
  906. [ 5.012180] fs_mgr: parse_link_device : path = NULL
  907. [ 5.012199] fs_mgr: parse_link_device : path = NULL
  908. [ 5.012219] fs_mgr: parse_link_device : path = NULL
  909. [ 5.012250] fs_mgr: parse_link_device : path = NULL
  910. [ 5.012271] fs_mgr: parse_link_device : path = NULL
  911. [ 5.132978] rk3288-lcdc lcdc0: blank mode:0
  912. [ 5.462997] init: sys_prop: permission denied uid:1003 name:sys.gmali.version
  913. [ 5.490592] iep dpi mode inactivity
  914. [ 5.682701] init: sys_prop: permission denied uid:1000 name:sys_graphic.cam_hal.ver
  915. [ 5.682844] init: sys_prop: permission denied uid:1000 name:sys_graphic.cam_trace
  916. [ 5.682948] init: sys_prop: permission denied uid:1000 name:sys_graphic.cam_camboard.ver
  917. [ 5.683055] init: sys_prop: permission denied uid:1000 name:sys_graphic.cam_libisp.ver
  918. [ 5.683153] init: sys_prop: permission denied uid:1000 name:sys_graphic.cam_isi.ver
  919. [ 5.687066] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
  920. [ 5.687082] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
  921. [ 5.687092] D1:camsys_open(710): camsys_marvin(ed933010) is opened!
  922. [ 5.687144] D1:camsys_extdev_register(226): Get RK30_PIN2_PB6(78) gpio(active: 0) for dev_id 0x2000000 success!
  923. [ 5.687160] D1:camsys_extdev_register(226): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
  924. [ 5.687174] D1:camsys_extdev_register(226): Get RK30_PIN0_PB3(11) gpio(active: 1) for dev_id 0x2000000 success!
  925. [ 5.687207] rockchip_gpio_request:GPIO7-13
  926. [ 5.687219] rockchip_gpio_set:GPIO7-13 level = 1
  927. [ 5.687227] rockchip_gpio_direction_output:set GPIO7-13 level 1
  928. [ 5.687238] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
  929. [ 5.687249] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0x207600,result=0x207600
  930. [ 5.687260] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
  931. [ 5.687284] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000400,result=0x400
  932. [ 5.687296] _rockchip_pinconf_set:GPIO7-13,group=isp_flash_trigger, function=isp_pin, type=3
  933. [ 5.687305] rk3288_calc_drv_reg_and_bit:GPIO7-13, drv_reg=0x74, bit=10
  934. [ 5.687314] _rockchip_pinconf_set:GPIO-7 13 data=0xc000000,type=3
  935. [ 5.687323] D1:camsys_extdev_register(248): Extdev(dev_id: 0x2000000) register success
  936. [ 5.692458] D1:camsys_mrv_clkin_cb(344): camsys_marvin clock(f: 210000000 Hz) in turn on
  937. [ 5.692472] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 1
  938. [ 5.692581] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 0
  939. [ 5.692618] D1:camsys_mrv_clkout_cb(379): camsys_marvin clock out(rate: 24000000Hz) turn on
  940. [ 5.693701] D1:camsys_sysctl_extdev(326): Sysctl 11 success, gpio(11) set 1
  941. [ 5.694779] D1:camsys_sysctl_extdev(330): Sysctl 8 success, gpio(79) set 1
  942. [ 5.695853] D1:camsys_sysctl_extdev(330): Sysctl 7 success, gpio(78) set 1
  943. [ 5.699078] E:camsys_i2c_write(77): i2c write dev(addr:0x20) failed!
  944. [ 5.700271] E:camsys_i2c_write(77): i2c write dev(addr:0x6c) failed!
  945. [ 5.700319] D1:camsys_sysctl_extdev(326): Sysctl 7 success, gpio(78) set 0
  946. [ 5.700334] D1:camsys_sysctl_extdev(326): Sysctl 8 success, gpio(79) set 0
  947. [ 5.700348] D1:camsys_sysctl_extdev(330): Sysctl 11 success, gpio(11) set 0
  948. [ 5.701442] D1:camsys_mrv_clkin_cb(361): camsys_marvin clock in turn off
  949. [ 5.701471] D1:camsys_mrv_clkout_cb(391): camsys_marvin clock out turn off
  950. [ 5.703526] D1:camsys_extdev_deregister(308): Extdev(dev_id: 0x2000000) is deregister success
  951. [ 5.703543] D1:camsys_irq_disconnect(635): All thread disconnect camsys_marvin irq success!
  952. [ 5.703555] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
  953. [ 5.703564] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
  954. [ 5.703573] D1:camsys_release(734): camsys_marvin(ed933010) is closed
  955. [ 5.849710] Enter::rk29_hw_params----52
  956. [ 5.850664] Enter:rk29_hw_params, 86, rate=44100
  957. [ 5.850678] Enter:rk29_hw_params, 104, LRCK=64
  958. [ 6.166825] Enter::rk29_hw_params----52
  959. [ 6.167829] Enter:rk29_hw_params, 86, rate=44100
  960. [ 6.167847] Enter:rk29_hw_params, 104, LRCK=64
  961. [ 8.751270] warning: `zygote' uses 32-bit capabilities (legacy support in use)
  962. [ 9.728245] es8323_mic_state_ctrl read: 0
  963. [ 9.728269] mic_state_switch 0
  964. [ 9.728282] hp_det = 0,insert hp
  965. [ 9.728293] hp mic use intern
  966. [ 10.466408] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
  967. [ 10.466434] lowmemorykiller: oom_adj 0 => oom_score_adj 0
  968. [ 10.466443] lowmemorykiller: oom_adj 1 => oom_score_adj 58
  969. [ 10.466450] lowmemorykiller: oom_adj 2 => oom_score_adj 117
  970. [ 10.466458] lowmemorykiller: oom_adj 3 => oom_score_adj 176
  971. [ 10.466465] lowmemorykiller: oom_adj 9 => oom_score_adj 529
  972. [ 10.466473] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
  973. [ 10.619884] phy_power_on: enable = 1
  974. [ 10.654371] Read the Ethernet MAC address from IDB:00:00:00:00:00:00
  975. [ 10.654413] eth0: device MAC address **:**:**:**:**:**
  976. [ 10.658536] libphy: stmmac: probed
  977. [ 10.658550] eth0: PHY ID 001cc915 at 0 IRQ 0 (stmmac-0:00) active
  978. [ 10.658560] eth0: PHY ID 001cc915 at 1 IRQ 0 (stmmac-0:01) active
  979. [ 10.803946] wifi_driver_write: wifi driver already rmmod
  980. [ 10.982547] acc_open
  981. [ 10.984743] acc_release
  982. [ 12.367210] init: no such service 'fuse_internal_sd'
  983. [ 12.998084] init: sys_prop: permission denied uid:1001 name:media.cfg.audio.soundeffect
  984. [ 13.162816] init: sys_prop: permission denied uid:10007 name:sys.gmali.version
  985. [ 13.326828] vpu_service: power on
  986. [ 13.326897] rk_iommu ff9a0800.vpu_mmu: (vpu) Enabled
  987. [ 13.761759] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
  988. [ 17.269037] rk_iommu ff9a0800.vpu_mmu: (vpu) Disabled
  989. [ 17.269060] rk_iommu ff9a0800.vpu_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e26e000
  990. [ 17.269071] vpu_service: power off...
  991. [ 17.269106] done
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement