API tools faq
paste
Guest User

smart

a guest
Jan 25th, 2015
228
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.94 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.2 2013-07-26 r3841 [i686-linux-3.13.0-24-generic] (local build)
  2. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: SAMSUNG SpinPoint M7E (AF)
  6. Device Model: SAMSUNG HM641JI
  7. Serial Number: S26XJ9FB829215
  8. LU WWN Device Id: 5 0024e9 205ebd8fa
  9. Firmware Version: 2AJ10002
  10. User Capacity: 640,135,028,736 bytes [640 GB]
  11. Sector Size: 512 bytes logical/physical
  12. Rotation Rate: 5400 rpm
  13. Device is: In smartctl database [for details use: -P show]
  14. ATA Version is: ATA8-ACS T13/1699-D revision 6
  15. SATA Version is: SATA 2.6, 3.0 Gb/s
  16. Local Time is: Sun Jan 25 12:12:55 2015 CET
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x00) Offline data collection activity
  25. was never started.
  26. Auto Offline Data Collection: Disabled.
  27. Self-test execution status: ( 0) The previous self-test routine completed
  28. without error or no self-test has ever
  29. been run.
  30. Total time to complete Offline
  31. data collection: (10080) seconds.
  32. Offline data collection
  33. capabilities: (0x5b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. No Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 2) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 168) minutes.
  50. SCT capabilities: (0x003f) SCT Status supported.
  51. SCT Error Recovery Control supported.
  52. SCT Feature Control supported.
  53. SCT Data Table supported.
  54.  
  55. SMART Attributes Data Structure revision number: 16
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  58. 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 9517
  59. 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
  60. 3 Spin_Up_Time 0x0023 089 088 025 Pre-fail Always - 3406
  61. 4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3803
  62. 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
  63. 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
  64. 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
  65. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 5748
  66. 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
  67. 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 931
  68. 12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3801
  69. 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 806
  70. 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
  71. 194 Temperature_Celsius 0x0002 064 051 000 Old_age Always - 33 (Min/Max 15/49)
  72. 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
  73. 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
  74. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 8
  75. 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
  76. 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
  77. 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 232
  78. 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 931
  79. 225 Load_Cycle_Count 0x0032 080 080 000 Old_age Always - 206275
  80.  
  81. SMART Error Log Version: 1
  82. ATA Error Count: 93 (device log contains only the most recent five errors)
  83. CR = Command Register [HEX]
  84. FR = Features Register [HEX]
  85. SC = Sector Count Register [HEX]
  86. SN = Sector Number Register [HEX]
  87. CL = Cylinder Low Register [HEX]
  88. CH = Cylinder High Register [HEX]
  89. DH = Device/Head Register [HEX]
  90. DC = Device Command Register [HEX]
  91. ER = Error register [HEX]
  92. ST = Status register [HEX]
  93. Powered_Up_Time is measured from power on, and printed as
  94. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  95. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  96.  
  97. Error 93 occurred at disk power-on lifetime: 5747 hours (239 days + 11 hours)
  98. When the command that caused the error occurred, the device was active or idle.
  99.  
  100. After command completion occurred, registers were:
  101. ER ST SC SN CL CH DH
  102. -- -- -- -- -- -- --
  103. 40 51 01 df e1 66 e0 Error: UNC 1 sectors at LBA = 0x0066e1df = 6742495
  104.  
  105. Commands leading to the command that caused the error were:
  106. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  107. -- -- -- -- -- -- -- -- ---------------- --------------------
  108. c8 00 01 df e1 66 e0 08 00:00:00.712 READ DMA
  109. 27 00 00 00 00 00 e0 08 00:00:00.712 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  110. ec 00 00 00 00 00 a0 08 00:00:00.712 IDENTIFY DEVICE
  111. ef 03 46 00 00 00 a0 08 00:00:00.712 SET FEATURES [Set transfer mode]
  112. 27 00 00 00 00 00 e0 08 00:00:00.712 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  113.  
  114. Error 92 occurred at disk power-on lifetime: 5747 hours (239 days + 11 hours)
  115. When the command that caused the error occurred, the device was active or idle.
  116.  
  117. After command completion occurred, registers were:
  118. ER ST SC SN CL CH DH
  119. -- -- -- -- -- -- --
  120. 40 51 01 df e1 66 e0 Error: UNC 1 sectors at LBA = 0x0066e1df = 6742495
  121.  
  122. Commands leading to the command that caused the error were:
  123. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  124. -- -- -- -- -- -- -- -- ---------------- --------------------
  125. c8 00 01 df e1 66 e0 08 00:00:00.710 READ DMA
  126. 27 00 00 00 00 00 e0 08 00:00:00.710 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  127. ec 00 00 00 00 00 a0 08 00:00:00.710 IDENTIFY DEVICE
  128. ef 03 46 00 00 00 a0 08 00:00:00.710 SET FEATURES [Set transfer mode]
  129. 27 00 00 00 00 00 e0 08 00:00:00.710 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  130.  
  131. Error 91 occurred at disk power-on lifetime: 5747 hours (239 days + 11 hours)
  132. When the command that caused the error occurred, the device was active or idle.
  133.  
  134. After command completion occurred, registers were:
  135. ER ST SC SN CL CH DH
  136. -- -- -- -- -- -- --
  137. 40 51 01 df e1 66 e0 Error: UNC 1 sectors at LBA = 0x0066e1df = 6742495
  138.  
  139. Commands leading to the command that caused the error were:
  140. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  141. -- -- -- -- -- -- -- -- ---------------- --------------------
  142. c8 00 01 df e1 66 e0 08 00:00:00.708 READ DMA
  143. 27 00 00 00 00 00 e0 08 00:00:00.708 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  144. ec 00 00 00 00 00 a0 08 00:00:00.708 IDENTIFY DEVICE
  145. ef 03 46 00 00 00 a0 08 00:00:00.708 SET FEATURES [Set transfer mode]
  146. 27 00 00 00 00 00 e0 08 00:00:00.708 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  147.  
  148. Error 90 occurred at disk power-on lifetime: 5747 hours (239 days + 11 hours)
  149. When the command that caused the error occurred, the device was active or idle.
  150.  
  151. After command completion occurred, registers were:
  152. ER ST SC SN CL CH DH
  153. -- -- -- -- -- -- --
  154. 40 51 01 df e1 66 e0 Error: UNC 1 sectors at LBA = 0x0066e1df = 6742495
  155.  
  156. Commands leading to the command that caused the error were:
  157. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  158. -- -- -- -- -- -- -- -- ---------------- --------------------
  159. c8 00 06 da e1 66 e0 08 00:00:00.706 READ DMA
  160. c8 00 01 d9 e1 66 e0 08 00:00:00.706 READ DMA
  161. c8 00 01 d8 e1 66 e0 08 00:00:00.706 READ DMA
  162. c8 00 06 d2 e1 66 e0 08 00:00:00.706 READ DMA
  163. c8 00 01 d1 e1 66 e0 08 00:00:00.706 READ DMA
  164.  
  165. Error 89 occurred at disk power-on lifetime: 5747 hours (239 days + 11 hours)
  166. When the command that caused the error occurred, the device was active or idle.
  167.  
  168. After command completion occurred, registers were:
  169. ER ST SC SN CL CH DH
  170. -- -- -- -- -- -- --
  171. 40 51 01 76 da 66 e0 Error: UNC 1 sectors at LBA = 0x0066da76 = 6740598
  172.  
  173. Commands leading to the command that caused the error were:
  174. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  175. -- -- -- -- -- -- -- -- ---------------- --------------------
  176. c8 00 01 76 da 66 e0 08 00:00:00.704 READ DMA
  177. 27 00 00 00 00 00 e0 08 00:00:00.704 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  178. ec 00 00 00 00 00 a0 08 00:00:00.704 IDENTIFY DEVICE
  179. ef 03 46 00 00 00 a0 08 00:00:00.704 SET FEATURES [Set transfer mode]
  180. 27 00 00 00 00 00 e0 08 00:00:00.704 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  181.  
  182. SMART Self-test log structure revision number 1
  183. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  184.  
  185.  
  186. SMART Selective self-test log data structure revision number 0
  187. Note: revision number not 1 implies that no selective self-test has ever been run
  188. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  189. 1 0 0 Completed [00% left] (0-65535)
  190. 2 0 0 Not_testing
  191. 3 0 0 Not_testing
  192. 4 0 0 Not_testing
  193. 5 0 0 Not_testing
  194. Selective self-test flags (0x0):
  195. After scanning selected spans, do NOT read-scan remainder of disk.
  196. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!