Advertisement
Guest User

Smart

a guest
Sep 3rd, 2014
520
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.88 KB | None | 0 0
  1. smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.16.1-1-ARCH] (local build)
  2. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Barracuda 7200.14 (AF)
  6. Device Model: ST2000DM001-9YN164
  7. Serial Number: W1E263ZS
  8. LU WWN Device Id: 5 000c50 05da3c1d0
  9. Firmware Version: CC9F
  10. User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 7200 rpm
  13. Device is: In smartctl database [for details use: -P show]
  14. ATA Version is: ATA8-ACS T13/1699-D revision 4
  15. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  16. Local Time is: Wed Sep 3 10:10:38 2014 MSK
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x82) Offline data collection activity
  25. was completed without error.
  26. Auto Offline Data Collection: Enabled.
  27. Self-test execution status: ( 0) The previous self-test routine completed
  28. without error or no self-test has ever
  29. been run.
  30. Total time to complete Offline
  31. data collection: ( 575) seconds.
  32. Offline data collection
  33. capabilities: (0x7b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 1) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 223) minutes.
  50. Conveyance self-test routine
  51. recommended polling time: ( 2) minutes.
  52. SCT capabilities: (0x3081) SCT Status supported.
  53.  
  54. SMART Attributes Data Structure revision number: 10
  55. Vendor Specific SMART Attributes with Thresholds:
  56. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  57. 1 Raw_Read_Error_Rate 0x000f 107 099 006 Pre-fail Always - 79923532
  58. 3 Spin_Up_Time 0x0003 096 094 000 Pre-fail Always - 0
  59. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 107
  60. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  61. 7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 198510176
  62. 9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 13339
  63. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  64. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 102
  65. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  66. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  67. 187 Reported_Uncorrect 0x0032 092 092 000 Old_age Always - 8
  68. 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 1 1 2
  69. 189 High_Fly_Writes 0x003a 097 097 000 Old_age Always - 3
  70. 190 Airflow_Temperature_Cel 0x0022 067 046 045 Old_age Always - 33 (Min/Max 33/39)
  71. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  72. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 60
  73. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 178
  74. 194 Temperature_Celsius 0x0022 033 054 000 Old_age Always - 33 (0 21 0 0 0)
  75. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 8
  76. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 8
  77. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  78. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 13332h+12m+25.020s
  79. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 6482072630562
  80. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 262327342616494
  81.  
  82. SMART Error Log Version: 1
  83. ATA Error Count: 4
  84. CR = Command Register [HEX]
  85. FR = Features Register [HEX]
  86. SC = Sector Count Register [HEX]
  87. SN = Sector Number Register [HEX]
  88. CL = Cylinder Low Register [HEX]
  89. CH = Cylinder High Register [HEX]
  90. DH = Device/Head Register [HEX]
  91. DC = Device Command Register [HEX]
  92. ER = Error register [HEX]
  93. ST = Status register [HEX]
  94. Powered_Up_Time is measured from power on, and printed as
  95. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  96. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  97.  
  98. Error 4 occurred at disk power-on lifetime: 13338 hours (555 days + 18 hours)
  99. When the command that caused the error occurred, the device was active or idle.
  100.  
  101. After command completion occurred, registers were:
  102. ER ST SC SN CL CH DH
  103. -- -- -- -- -- -- --
  104. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  105.  
  106. Commands leading to the command that caused the error were:
  107. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  108. -- -- -- -- -- -- -- -- ---------------- --------------------
  109. 60 00 08 ff ff ff 4f 00 11d+18:45:00.527 READ FPDMA QUEUED
  110. 60 00 28 ff ff ff 4f 00 11d+18:45:00.106 READ FPDMA QUEUED
  111. 60 00 20 ff ff ff 4f 00 11d+18:45:00.106 READ FPDMA QUEUED
  112. 60 00 20 ff ff ff 4f 00 11d+18:45:00.105 READ FPDMA QUEUED
  113. 60 00 20 ff ff ff 4f 00 11d+18:45:00.105 READ FPDMA QUEUED
  114.  
  115. Error 3 occurred at disk power-on lifetime: 13338 hours (555 days + 18 hours)
  116. When the command that caused the error occurred, the device was active or idle.
  117.  
  118. After command completion occurred, registers were:
  119. ER ST SC SN CL CH DH
  120. -- -- -- -- -- -- --
  121. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  122.  
  123. Commands leading to the command that caused the error were:
  124. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  125. -- -- -- -- -- -- -- -- ---------------- --------------------
  126. 60 00 20 ff ff ff 4f 00 11d+18:44:58.731 READ FPDMA QUEUED
  127. 60 00 20 ff ff ff 4f 00 11d+18:44:58.731 READ FPDMA QUEUED
  128. 60 00 20 ff ff ff 4f 00 11d+18:44:58.730 READ FPDMA QUEUED
  129. 60 00 20 ff ff ff 4f 00 11d+18:44:58.730 READ FPDMA QUEUED
  130. 60 00 28 ff ff ff 4f 00 11d+18:44:58.730 READ FPDMA QUEUED
  131.  
  132. Error 2 occurred at disk power-on lifetime: 13338 hours (555 days + 18 hours)
  133. When the command that caused the error occurred, the device was active or idle.
  134.  
  135. After command completion occurred, registers were:
  136. ER ST SC SN CL CH DH
  137. -- -- -- -- -- -- --
  138. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  139.  
  140. Commands leading to the command that caused the error were:
  141. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  142. -- -- -- -- -- -- -- -- ---------------- --------------------
  143. 60 00 20 ff ff ff 4f 00 11d+18:44:53.572 READ FPDMA QUEUED
  144. 60 00 20 ff ff ff 4f 00 11d+18:44:53.572 READ FPDMA QUEUED
  145. 60 00 20 ff ff ff 4f 00 11d+18:44:53.572 READ FPDMA QUEUED
  146. 60 00 20 ff ff ff 4f 00 11d+18:44:53.572 READ FPDMA QUEUED
  147. 60 00 20 ff ff ff 4f 00 11d+18:44:53.572 READ FPDMA QUEUED
  148.  
  149. Error 1 occurred at disk power-on lifetime: 13338 hours (555 days + 18 hours)
  150. When the command that caused the error occurred, the device was active or idle.
  151.  
  152. After command completion occurred, registers were:
  153. ER ST SC SN CL CH DH
  154. -- -- -- -- -- -- --
  155. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  156.  
  157. Commands leading to the command that caused the error were:
  158. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  159. -- -- -- -- -- -- -- -- ---------------- --------------------
  160. 60 00 00 ff ff ff 4f 00 11d+18:44:45.283 READ FPDMA QUEUED
  161. 60 00 00 ff ff ff 4f 00 11d+18:44:45.146 READ FPDMA QUEUED
  162. 60 00 28 ff ff ff 4f 00 11d+18:44:44.678 READ FPDMA QUEUED
  163. 60 00 00 ff ff ff 4f 00 11d+18:44:44.556 READ FPDMA QUEUED
  164. 60 00 00 ff ff ff 4f 00 11d+18:44:44.406 READ FPDMA QUEUED
  165.  
  166. SMART Self-test log structure revision number 1
  167. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  168. # 1 Extended offline Completed without error 00% 13243 -
  169. # 2 Extended offline Completed without error 00% 13074 -
  170. # 3 Extended offline Completed without error 00% 12905 -
  171. # 4 Extended offline Completed without error 00% 12737 -
  172. # 5 Extended offline Completed without error 00% 12570 -
  173. # 6 Extended offline Completed without error 00% 12402 -
  174. # 7 Extended offline Completed without error 00% 12237 -
  175. # 8 Extended offline Completed without error 00% 12078 -
  176. # 9 Extended offline Completed without error 00% 11907 -
  177. #10 Short offline Completed without error 00% 11774 -
  178. #11 Extended offline Completed without error 00% 3 -
  179.  
  180. SMART Selective self-test log data structure revision number 1
  181. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  182. 1 0 0 Not_testing
  183. 2 0 0 Not_testing
  184. 3 0 0 Not_testing
  185. 4 0 0 Not_testing
  186. 5 0 0 Not_testing
  187. Selective self-test flags (0x0):
  188. After scanning selected spans, do NOT read-scan remainder of disk.
  189. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement