Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- $ sudo smartctl --all /dev/sda
- smartctl 5.42 2011-10-20 r3458 [x86_64-linux-3.3.8-1-ARCH] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Toshiba 2.5" HDD MK..52GSX
- Device Model: TOSHIBA MK2552GSX
- Serial Number: 985GC1DIT
- LU WWN Device Id: 5 000039 143a80718
- Firmware Version: LV010M
- User Capacity: 250,059,350,016 bytes [250 GB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 8
- ATA Standard is: Exact ATA specification draft version not indicated
- Local Time is: Sun Jun 10 14:42:51 2012 FET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x02) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 120) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 118) minutes.
- SCT capabilities: (0x0039) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
- 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
- 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1634
- 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 5153
- 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
- 9 Power_On_Hours 0x0032 080 080 000 Old_age Always - 8178
- 10 Spin_Retry_Count 0x0033 202 100 030 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 4187
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 46
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 8716359
- 193 Load_Cycle_Count 0x0032 080 080 000 Old_age Always - 201498
- 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 40 (Min/Max 9/51)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
- 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 8366
- 222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6177
- 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
- 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
- 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 330
- 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
- SMART Error Log Version: 1
- ATA Error Count: 32 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 32 occurred at disk power-on lifetime: 2428 hours (101 days + 4 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 ca f8 74 d7 69 Error: WP at LBA = 0x09d774f8 = 165115128
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 08 f8 08 e8 8c 40 00 16:41:01.608 WRITE FPDMA QUEUED
- 61 08 f0 28 f0 8d 40 00 16:41:01.607 WRITE FPDMA QUEUED
- 61 10 e8 80 0b 17 40 00 16:41:00.469 WRITE FPDMA QUEUED
- 61 08 e0 e0 ed 1f 40 00 16:41:00.469 WRITE FPDMA QUEUED
- 61 08 d8 a0 c1 3b 40 00 16:41:00.469 WRITE FPDMA QUEUED
- Error 31 occurred at disk power-on lifetime: 2254 hours (93 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 1a f8 74 d7 69 Error: UNC at LBA = 0x09d774f8 = 165115128
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 a0 18 80 74 d7 40 00 08:56:45.860 READ FPDMA QUEUED
- 2f 00 01 10 00 00 40 00 08:56:45.860 READ LOG EXT
- 61 08 10 f8 e7 8c 40 00 08:56:43.378 WRITE FPDMA QUEUED
- 61 08 08 08 e8 8c 40 00 08:56:43.378 WRITE FPDMA QUEUED
- 61 40 00 08 48 8e 40 00 08:56:43.378 WRITE FPDMA QUEUED
- Error 30 occurred at disk power-on lifetime: 2254 hours (93 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 c2 f8 74 d7 69 Error: WP at LBA = 0x09d774f8 = 165115128
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 08 10 f8 e7 8c 40 00 08:56:43.378 WRITE FPDMA QUEUED
- 61 08 08 08 e8 8c 40 00 08:56:43.378 WRITE FPDMA QUEUED
- 61 40 00 08 48 8e 40 00 08:56:43.378 WRITE FPDMA QUEUED
- 60 20 f8 40 4e 9f 40 00 08:56:41.275 READ FPDMA QUEUED
- 61 08 f0 d0 40 9f 40 00 08:56:41.275 WRITE FPDMA QUEUED
- Error 29 occurred at disk power-on lifetime: 2254 hours (93 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 8a f8 74 d7 69 Error: WP at LBA = 0x09d774f8 = 165115128
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 08 b8 d8 14 40 40 00 08:56:39.254 WRITE FPDMA QUEUED
- 61 05 b0 e0 14 40 40 00 08:56:39.244 WRITE FPDMA QUEUED
- 61 08 a8 f0 e7 8c 40 00 08:56:38.372 WRITE FPDMA QUEUED
- 61 08 a0 00 e8 8c 40 00 08:56:38.371 WRITE FPDMA QUEUED
- 61 18 98 f0 47 8e 40 00 08:56:38.371 WRITE FPDMA QUEUED
- Error 28 occurred at disk power-on lifetime: 2095 hours (87 days + 7 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 5a f8 74 d7 69 Error: WP at LBA = 0x09d774f8 = 165115128
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 08 68 00 e8 8c 40 00 01:10:13.585 WRITE FPDMA QUEUED
- 61 20 60 28 04 8e 40 00 01:10:13.585 WRITE FPDMA QUEUED
- 60 a0 58 80 74 d7 40 00 01:10:12.792 READ FPDMA QUEUED
- 61 20 50 40 56 7d 40 00 01:10:12.792 WRITE FPDMA QUEUED
- 60 20 48 20 ad 95 40 00 01:10:12.791 READ FPDMA QUEUED
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 0 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement