Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.11.0-12-generic (buildd@allspice) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=bc6aa74e-392c-4690-a230-47e450e3c204 ro gfxpayload=true quiet splash
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000913ff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf224fff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000cf225000-0x00000000cf268fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000cf269000-0x00000000cf5b6fff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000cf5b7000-0x00000000cf5e6fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000cf5e7000-0x00000000cf7e6fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000cf7e7000-0x00000000cf7fefff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000cf7ff000-0x00000000cf7fffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffc1ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012dffffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.6 present.
- [ 0.000000] DMI: Dell Inc. Latitude E6420/038C0K, BIOS A08 10/18/2011
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] No AGP bridge found
- [ 0.000000] e820: last_pfn = 0x12e000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F80000000 write-back
- [ 0.000000] 1 base 080000000 mask FC0000000 write-back
- [ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
- [ 0.000000] 3 base 100000000 mask FE0000000 write-back
- [ 0.000000] 4 base 120000000 mask FF0000000 write-back
- [ 0.000000] 5 base 12E000000 mask FFE000000 uncachable
- [ 0.000000] 6 base 0FFC00000 mask FFFC00000 write-protect
- [ 0.000000] 7 disabled
- [ 0.000000] 8 disabled
- [ 0.000000] 9 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [mem 0x000f1a50-0x000f1a5f] mapped at [ffff8800000f1a50]
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
- [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
- [ 0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE
- [ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
- [ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x12de00000-0x12dffffff]
- [ 0.000000] [mem 0x12de00000-0x12dffffff] page 2M
- [ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12ddfffff]
- [ 0.000000] [mem 0x12c000000-0x12ddfffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
- [ 0.000000] [mem 0x100000000-0x12bffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x00100000-0xcf224fff]
- [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
- [ 0.000000] [mem 0x00200000-0xcf1fffff] page 2M
- [ 0.000000] [mem 0xcf200000-0xcf224fff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0xcf269000-0xcf5b6fff]
- [ 0.000000] [mem 0xcf269000-0xcf5b6fff] page 4k
- [ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0xcf7ff000-0xcf7fffff]
- [ 0.000000] [mem 0xcf7ff000-0xcf7fffff] page 4k
- [ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
- [ 0.000000] RAMDISK: [mem 0x36cda000-0x37664fff]
- [ 0.000000] ACPI: RSDP 00000000000fe300 00024 (v02 DELL )
- [ 0.000000] ACPI: XSDT 00000000cf7fde18 00084 (v01 DELL CBX3 06222004 MSFT 00010013)
- [ 0.000000] ACPI: FACP 00000000cf787d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013)
- [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20130517/tbfadt-395)
- [ 0.000000] ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0xCF7E4E40/0x00000000CF7E4D40, using 32 (20130517/tbfadt-522)
- [ 0.000000] ACPI: DSDT 00000000cf755018 087F6 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
- [ 0.000000] ACPI: FACS 00000000cf7e4e40 00040
- [ 0.000000] ACPI: APIC 00000000cf7fcf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013)
- [ 0.000000] ACPI: TCPA 00000000cf7e5d18 00032 (v02 00000000 00000000)
- [ 0.000000] ACPI: SSDT 00000000cf788a98 002F9 (v01 DELLTP TPM 00003000 INTL 20090903)
- [ 0.000000] ACPI: MCFG 00000000cf7e5c98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097)
- [ 0.000000] ACPI: HPET 00000000cf7e5c18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003)
- [ 0.000000] ACPI: BOOT 00000000cf7e5b98 00028 (v01 DELL CBX3 06222004 AMI 00010013)
- [ 0.000000] ACPI: SSDT 00000000cf76c018 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20090903)
- [ 0.000000] ACPI: SSDT 00000000cf76b018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903)
- [ 0.000000] ACPI: DMAR 00000000cf7e4a18 000B0 (v01 INTEL SNB 00000001 INTL 00000001)
- [ 0.000000] ACPI: SLIC 00000000cf775c18 00176 (v03 DELL CBX3 06222004 MSFT 00010013)
- [ 0.000000] ACPI: SSDT 00000000cf773018 014A0 (v01 NvdRef NvdTabl 00001000 INTL 20090903)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012dffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12dffffff]
- [ 0.000000] NODE_DATA [mem 0x12dff7000-0x12dffbfff]
- [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880129600000-ffff88012d5fffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal [mem 0x100000000-0x12dffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00001000-0x00090fff]
- [ 0.000000] node 0: [mem 0x00100000-0xcf224fff]
- [ 0.000000] node 0: [mem 0xcf269000-0xcf5b6fff]
- [ 0.000000] node 0: [mem 0xcf7ff000-0xcf7fffff]
- [ 0.000000] node 0: [mem 0x100000000-0x12dffffff]
- [ 0.000000] On node 0 totalpages: 1037572
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 21 pages reserved
- [ 0.000000] DMA zone: 3984 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 13206 pages used for memmap
- [ 0.000000] DMA32 zone: 845172 pages, LIFO batch:31
- [ 0.000000] Normal zone: 2944 pages used for memmap
- [ 0.000000] Normal zone: 188416 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xcf225000-0xcf268fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xcf5b7000-0xcf5e6fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xcf5e7000-0xcf7e6fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xcf7e7000-0xcf7fefff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xfed1bfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffbfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffc1ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xffc20000-0xffffffff]
- [ 0.000000] e820: [mem 0xcf800000-0xfed1bfff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88012dc00000 s86720 r8192 d23872 u131072
- [ 0.000000] pcpu-alloc: s86720 r8192 d23872 u131072 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1021337
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=bc6aa74e-392c-4690-a230-47e450e3c204 ro gfxpayload=true quiet splash
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 3990476K/4150288K available (7141K kernel code, 1082K rwdata, 3260K rodata, 1364K init, 1420K bss, 159812K reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
- [ 0.000000] Offload RCU callbacks from all CPUs
- [ 0.000000] Offload RCU callbacks from CPUs: 0-255.
- [ 0.000000] NR_IRQS:16640 nr_irqs:808 16
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] allocated 16777216 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.004000] tsc: Detected 2494.451 MHz processor
- [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.90 BogoMIPS (lpj=9977804)
- [ 0.000005] pid_max: default: 32768 minimum: 301
- [ 0.000030] Security Framework initialized
- [ 0.000049] AppArmor: AppArmor initialized
- [ 0.000050] Yama: becoming mindful.
- [ 0.000308] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.001110] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.001444] Mount-cache hash table entries: 256
- [ 0.001610] Initializing cgroup subsys memory
- [ 0.001618] Initializing cgroup subsys devices
- [ 0.001620] Initializing cgroup subsys freezer
- [ 0.001621] Initializing cgroup subsys blkio
- [ 0.001622] Initializing cgroup subsys perf_event
- [ 0.001625] Initializing cgroup subsys hugetlb
- [ 0.001643] CPU: Physical Processor ID: 0
- [ 0.001644] CPU: Processor Core ID: 0
- [ 0.001648] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- [ 0.001648] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 0.001651] mce: CPU supports 7 MCE banks
- [ 0.001661] CPU0: Thermal monitoring enabled (TM1)
- [ 0.001670] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
- [ 0.001670] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
- [ 0.001670] tlb_flushall_shift: 5
- [ 0.001777] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
- [ 0.004284] ACPI: Core revision 20130517
- [ 0.009449] ACPI: All ACPI Tables successfully acquired
- [ 0.010386] ftrace: allocating 27796 entries in 109 pages
- [ 0.023698] dmar: Host address width 36
- [ 0.023701] dmar: DRHD base: 0x000000fed91000 flags: 0x1
- [ 0.023710] dmar: IOMMU 0: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
- [ 0.023712] dmar: RMRR base: 0x000000cf5c6000 end: 0x000000cf5d5fff
- [ 0.023783] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 0
- [ 0.023784] HPET id 0 under DRHD base 0xfed91000
- [ 0.023785] HPET id 0 under DRHD base 0xfed91000
- [ 0.023786] HPET id 0 under DRHD base 0xfed91000
- [ 0.023787] HPET id 0 under DRHD base 0xfed91000
- [ 0.023788] HPET id 0 under DRHD base 0xfed91000
- [ 0.023789] HPET id 0 under DRHD base 0xfed91000
- [ 0.023790] HPET id 0 under DRHD base 0xfed91000
- [ 0.023791] HPET id 0 under DRHD base 0xfed91000
- [ 0.023877] Enabled IRQ remapping in x2apic mode
- [ 0.023879] Enabling x2apic
- [ 0.023880] Enabled x2apic
- [ 0.023885] Switched APIC routing to cluster x2apic.
- [ 0.024321] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.064051] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07)
- [ 0.064060] TSC deadline timer enabled
- [ 0.064071] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
- [ 0.064077] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
- [ 0.064079] ... version: 3
- [ 0.064080] ... bit width: 48
- [ 0.064081] ... generic registers: 4
- [ 0.064082] ... value mask: 0000ffffffffffff
- [ 0.064083] ... max period: 0000ffffffffffff
- [ 0.064084] ... fixed-purpose events: 3
- [ 0.064085] ... event mask: 000000070000000f
- [ 0.078841] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.065663] smpboot: Booting Node 0, Processors #1 #2 #3
- [ 0.105141] Brought up 4 CPUs
- [ 0.105144] smpboot: Total of 4 processors activated (19955.60 BogoMIPS)
- [ 0.108305] devtmpfs: initialized
- [ 0.109073] EVM: security.selinux
- [ 0.109074] EVM: security.SMACK64
- [ 0.109075] EVM: security.capability
- [ 0.109125] PM: Registering ACPI NVS region [mem 0xcf5e7000-0xcf7e6fff] (2097152 bytes)
- [ 0.109905] regulator-dummy: no parameters
- [ 0.109936] RTC time: 10:26:07, date: 12/02/13
- [ 0.109971] NET: Registered protocol family 16
- [ 0.110089] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.110091] ACPI: bus type PCI registered
- [ 0.110093] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.110147] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- [ 0.110149] PCI: not using MMCONFIG
- [ 0.110150] PCI: Using configuration type 1 for base access
- [ 0.110157] dmi type 0xB1 record - unknown flag
- [ 0.110291] mtrr: your CPUs had inconsistent variable MTRR settings
- [ 0.110292] mtrr: probably your BIOS does not setup all CPUs.
- [ 0.110292] mtrr: corrected configuration.
- [ 0.110948] bio: create slab <bio-0> at 0
- [ 0.111085] ACPI: Added _OSI(Module Device)
- [ 0.111087] ACPI: Added _OSI(Processor Device)
- [ 0.111088] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.111089] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.112454] ACPI: EC: Look up EC in DSDT
- [ 0.116155] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.148509] ACPI: SSDT 00000000cf5d7798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
- [ 0.148859] ACPI: Dynamic OEM Table Load:
- [ 0.148862] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
- [ 0.152403] ACPI: SSDT 00000000cf5d8a98 00303 (v01 PmRef ApIst 00003000 INTL 20090903)
- [ 0.152776] ACPI: Dynamic OEM Table Load:
- [ 0.152778] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20090903)
- [ 0.156293] ACPI: SSDT 00000000cf5d6d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903)
- [ 0.156636] ACPI: Dynamic OEM Table Load:
- [ 0.156638] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20090903)
- [ 0.188344] ACPI: Interpreter enabled
- [ 0.188350] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
- [ 0.188355] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
- [ 0.188368] ACPI: (supports S0 S3 S4 S5)
- [ 0.188370] ACPI: Using IOAPIC for interrupt routing
- [ 0.188387] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- [ 0.188737] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
- [ 0.193645] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.220428] ACPI: No dock devices found.
- [ 0.529902] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
- [ 0.529934] \_SB_.PCI0:_OSC invalid UUID
- [ 0.529935] _OSC request data:1 8 0
- [ 0.529964] \_SB_.PCI0:_OSC invalid UUID
- [ 0.529965] _OSC request data:1 1f 0
- [ 0.529968] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
- [ 0.529970] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
- [ 0.530525] PCI host bridge to bus 0000:00
- [ 0.530528] pci_bus 0000:00: root bus resource [bus 00-3e]
- [ 0.530530] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.530532] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.530533] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.530535] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff]
- [ 0.530537] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
- [ 0.530544] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
- [ 0.530623] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
- [ 0.530654] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.530692] pci 0000:00:01.0: System wakeup disabled by ACPI
- [ 0.530748] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
- [ 0.530774] pci 0000:00:16.0: reg 0x10: [mem 0xe67b0000-0xe67b000f 64bit]
- [ 0.530852] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.530922] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
- [ 0.530942] pci 0000:00:16.3: reg 0x10: [io 0x50a0-0x50a7]
- [ 0.530953] pci 0000:00:16.3: reg 0x14: [mem 0xe6790000-0xe6790fff]
- [ 0.531093] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
- [ 0.531113] pci 0000:00:19.0: reg 0x10: [mem 0xe6700000-0xe671ffff]
- [ 0.531122] pci 0000:00:19.0: reg 0x14: [mem 0xe6780000-0xe6780fff]
- [ 0.531131] pci 0000:00:19.0: reg 0x18: [io 0x5040-0x505f]
- [ 0.531195] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
- [ 0.537004] pci 0000:00:19.0: System wakeup disabled by ACPI
- [ 0.537058] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
- [ 0.537080] pci 0000:00:1a.0: reg 0x10: [mem 0xe6770000-0xe67703ff]
- [ 0.537172] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.537219] pci 0000:00:1a.0: System wakeup disabled by ACPI
- [ 0.537251] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
- [ 0.537268] pci 0000:00:1b.0: reg 0x10: [mem 0xe6760000-0xe6763fff 64bit]
- [ 0.537337] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.537380] pci 0000:00:1b.0: System wakeup disabled by ACPI
- [ 0.537414] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
- [ 0.537545] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.537598] pci 0000:00:1c.0: System wakeup disabled by ACPI
- [ 0.537630] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
- [ 0.537761] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.537815] pci 0000:00:1c.1: System wakeup disabled by ACPI
- [ 0.537847] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
- [ 0.537977] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 0.538030] pci 0000:00:1c.2: System wakeup disabled by ACPI
- [ 0.538062] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
- [ 0.538193] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 0.538247] pci 0000:00:1c.3: System wakeup disabled by ACPI
- [ 0.538281] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
- [ 0.538411] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 0.538465] pci 0000:00:1c.5: System wakeup disabled by ACPI
- [ 0.538502] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
- [ 0.538523] pci 0000:00:1d.0: reg 0x10: [mem 0xe6750000-0xe67503ff]
- [ 0.538615] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.538658] pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 0.538689] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
- [ 0.538857] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
- [ 0.538876] pci 0000:00:1f.2: reg 0x10: [io 0x5090-0x5097]
- [ 0.538885] pci 0000:00:1f.2: reg 0x14: [io 0x5080-0x5083]
- [ 0.538893] pci 0000:00:1f.2: reg 0x18: [io 0x5070-0x5077]
- [ 0.538901] pci 0000:00:1f.2: reg 0x1c: [io 0x5060-0x5063]
- [ 0.538910] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
- [ 0.538918] pci 0000:00:1f.2: reg 0x24: [mem 0xe6740000-0xe67407ff]
- [ 0.538965] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.539027] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
- [ 0.539043] pci 0000:00:1f.3: reg 0x10: [mem 0xe6730000-0xe67300ff 64bit]
- [ 0.539065] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
- [ 0.539183] pci 0000:01:00.0: [10de:1056] type 00 class 0x030000
- [ 0.539193] pci 0000:01:00.0: reg 0x10: [mem 0xe4000000-0xe4ffffff]
- [ 0.539202] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.539210] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
- [ 0.539217] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
- [ 0.539223] pci 0000:01:00.0: reg 0x30: [mem 0xe5000000-0xe507ffff pref]
- [ 0.539287] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
- [ 0.539295] pci 0000:01:00.1: reg 0x10: [mem 0xe5080000-0xe5083fff]
- [ 0.544387] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.544395] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
- [ 0.544403] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe50fffff]
- [ 0.544412] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
- [ 0.544517] pci 0000:00:1c.0: PCI bridge to [bus 02]
- [ 0.544778] pci 0000:03:00.0: [8086:0082] type 00 class 0x028000
- [ 0.544927] pci 0000:03:00.0: reg 0x10: [mem 0xe6600000-0xe6601fff 64bit]
- [ 0.545665] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
- [ 0.545810] pci 0000:03:00.0: System wakeup disabled by ACPI
- [ 0.552514] pci 0000:00:1c.1: PCI bridge to [bus 03]
- [ 0.552523] pci 0000:00:1c.1: bridge window [mem 0xe6600000-0xe66fffff]
- [ 0.552649] acpiphp: Slot [1] registered
- [ 0.552656] pci 0000:00:1c.2: PCI bridge to [bus 04-09]
- [ 0.552661] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
- [ 0.552666] pci 0000:00:1c.2: bridge window [mem 0xe5b00000-0xe64fffff]
- [ 0.552675] pci 0000:00:1c.2: bridge window [mem 0xe2b00000-0xe34fffff 64bit pref]
- [ 0.552759] pci 0000:00:1c.3: PCI bridge to [bus 0a]
- [ 0.552764] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
- [ 0.552769] pci 0000:00:1c.3: bridge window [mem 0xe5100000-0xe5afffff]
- [ 0.552778] pci 0000:00:1c.3: bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
- [ 0.554608] pci 0000:0b:00.0: [1217:8221] type 00 class 0x080501
- [ 0.554650] pci 0000:0b:00.0: reg 0x10: [mem 0xe6520000-0xe65201ff]
- [ 0.554972] pci 0000:0b:00.0: supports D1 D2
- [ 0.554974] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.555033] pci 0000:0b:00.0: System wakeup disabled by ACPI
- [ 0.555104] pci 0000:0b:00.1: [1217:8231] type 00 class 0x018000
- [ 0.555148] pci 0000:0b:00.1: reg 0x10: [mem 0xe6510000-0xe6510fff]
- [ 0.555207] pci 0000:0b:00.1: reg 0x18: [mem 0xe6500000-0xe65007ff]
- [ 0.555474] pci 0000:0b:00.1: supports D1 D2
- [ 0.555475] pci 0000:0b:00.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.562152] pci 0000:00:1c.5: PCI bridge to [bus 0b]
- [ 0.562159] pci 0000:00:1c.5: bridge window [mem 0xe6500000-0xe65fffff]
- [ 0.594921] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
- [ 0.594970] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
- [ 0.595017] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
- [ 0.595063] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
- [ 0.595109] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
- [ 0.595154] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 0.595200] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
- [ 0.595245] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 0.635282] ACPI: Enabled 2 GPEs in block 00 to 3F
- [ 0.635289] ACPI: \_SB_.PCI0: notify handler is installed
- [ 0.635341] Found 1 acpi root devices
- [ 0.635384] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
- [ 0.635470] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.635472] vgaarb: loaded
- [ 0.635473] vgaarb: bridge control possible 0000:01:00.0
- [ 0.635613] SCSI subsystem initialized
- [ 0.635614] ACPI: bus type ATA registered
- [ 0.635663] libata version 3.00 loaded.
- [ 0.635676] ACPI: bus type USB registered
- [ 0.635690] usbcore: registered new interface driver usbfs
- [ 0.635696] usbcore: registered new interface driver hub
- [ 0.635716] usbcore: registered new device driver usb
- [ 0.635818] PCI: Using ACPI for IRQ routing
- [ 0.637433] PCI: pci_cache_line_size set to 64 bytes
- [ 0.639261] e820: reserve RAM buffer [mem 0x00091400-0x0009ffff]
- [ 0.639262] e820: reserve RAM buffer [mem 0xcf225000-0xcfffffff]
- [ 0.639264] e820: reserve RAM buffer [mem 0xcf5b7000-0xcfffffff]
- [ 0.639265] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
- [ 0.639266] e820: reserve RAM buffer [mem 0x12e000000-0x12fffffff]
- [ 0.639339] NetLabel: Initializing
- [ 0.639341] NetLabel: domain hash size = 128
- [ 0.639341] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.639350] NetLabel: unlabeled traffic allowed by default
- [ 0.639400] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.639405] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.641432] Switched to clocksource hpet
- [ 0.645599] AppArmor: AppArmor Filesystem Enabled
- [ 0.645625] pnp: PnP ACPI init
- [ 0.645637] ACPI: bus type PNP registered
- [ 0.645667] pnp 00:00: [dma 4]
- [ 0.645685] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.645704] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
- [ 0.645804] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
- [ 0.645807] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
- [ 0.645838] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.645873] system 00:04: [io 0x0680-0x069f] has been reserved
- [ 0.645875] system 00:04: [io 0x1000-0x100f] has been reserved
- [ 0.645877] system 00:04: [io 0xffff] has been reserved
- [ 0.645879] system 00:04: [io 0xffff] has been reserved
- [ 0.645881] system 00:04: [io 0x0400-0x047f] could not be reserved
- [ 0.645883] system 00:04: [io 0x0500-0x057f] has been reserved
- [ 0.645884] system 00:04: [io 0x164e-0x164f] has been reserved
- [ 0.645886] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.645908] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.645931] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.669614] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (disabled)
- [ 0.669643] pnp 00:08: Plug and Play ACPI device, IDs DLL0493 PNP0f13 (active)
- [ 0.669679] pnp 00:09: Plug and Play ACPI device, IDs BCM0102 PNP0c31 (active)
- [ 0.669831] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.669833] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
- [ 0.669835] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 0.669837] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 0.669839] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
- [ 0.669840] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.669842] system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved
- [ 0.669844] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
- [ 0.669846] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
- [ 0.669848] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
- [ 0.669850] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.677628] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
- [ 0.717912] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.717920] pnp: PnP ACPI: found 13 devices
- [ 0.717921] ACPI: bus type PNP unregistered
- [ 0.724072] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.724075] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
- [ 0.724078] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe50fffff]
- [ 0.724081] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
- [ 0.724085] pci 0000:00:1c.0: PCI bridge to [bus 02]
- [ 0.724102] pci 0000:00:1c.1: PCI bridge to [bus 03]
- [ 0.724109] pci 0000:00:1c.1: bridge window [mem 0xe6600000-0xe66fffff]
- [ 0.724122] pci 0000:00:1c.2: PCI bridge to [bus 04-09]
- [ 0.724125] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
- [ 0.724131] pci 0000:00:1c.2: bridge window [mem 0xe5b00000-0xe64fffff]
- [ 0.724137] pci 0000:00:1c.2: bridge window [mem 0xe2b00000-0xe34fffff 64bit pref]
- [ 0.724145] pci 0000:00:1c.3: PCI bridge to [bus 0a]
- [ 0.724148] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
- [ 0.724155] pci 0000:00:1c.3: bridge window [mem 0xe5100000-0xe5afffff]
- [ 0.724160] pci 0000:00:1c.3: bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
- [ 0.724169] pci 0000:00:1c.5: PCI bridge to [bus 0b]
- [ 0.724176] pci 0000:00:1c.5: bridge window [mem 0xe6500000-0xe65fffff]
- [ 0.724626] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.724628] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.724630] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.724631] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfeafffff]
- [ 0.724633] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
- [ 0.724635] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
- [ 0.724636] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe50fffff]
- [ 0.724638] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
- [ 0.724640] pci_bus 0000:03: resource 1 [mem 0xe6600000-0xe66fffff]
- [ 0.724642] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
- [ 0.724643] pci_bus 0000:04: resource 1 [mem 0xe5b00000-0xe64fffff]
- [ 0.724645] pci_bus 0000:04: resource 2 [mem 0xe2b00000-0xe34fffff 64bit pref]
- [ 0.724647] pci_bus 0000:0a: resource 0 [io 0x2000-0x2fff]
- [ 0.724648] pci_bus 0000:0a: resource 1 [mem 0xe5100000-0xe5afffff]
- [ 0.724650] pci_bus 0000:0a: resource 2 [mem 0xe2100000-0xe2afffff 64bit pref]
- [ 0.724652] pci_bus 0000:0b: resource 1 [mem 0xe6500000-0xe65fffff]
- [ 0.724677] NET: Registered protocol family 2
- [ 0.724829] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.724927] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.724992] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.725011] TCP: reno registered
- [ 0.725019] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.725035] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.725098] NET: Registered protocol family 1
- [ 0.725458] pci 0000:01:00.0: Boot video device
- [ 0.727225] PCI: CLS 64 bytes, default 64
- [ 0.727267] Trying to unpack rootfs image as initramfs...
- [ 0.881316] Freeing initrd memory: 9772K (ffff880036cda000 - ffff880037665000)
- [ 0.881326] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.881328] software IO TLB [mem 0xcb225000-0xcf225000] (64MB) mapped at [ffff8800cb225000-ffff8800cf224fff]
- [ 0.881362] Simple Boot Flag at 0xf3 set to 0x1
- [ 0.881531] Scanning for low memory corruption every 60 seconds
- [ 0.881852] Initialise module verification
- [ 0.881893] audit: initializing netlink socket (disabled)
- [ 0.881904] type=2000 audit(1385979967.880:1): initialized
- [ 0.906549] bounce pool size: 64 pages
- [ 0.906559] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.907480] zbud: loaded
- [ 0.907596] VFS: Disk quotas dquot_6.5.2
- [ 0.907635] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.908027] fuse init (API version 7.22)
- [ 0.908089] msgmni has been set to 7813
- [ 0.908516] Key type asymmetric registered
- [ 0.908518] Asymmetric key parser 'x509' registered
- [ 0.908545] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.908580] io scheduler noop registered
- [ 0.908582] io scheduler deadline registered (default)
- [ 0.908600] io scheduler cfq registered
- [ 0.908680] pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
- [ 0.909029] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.909042] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.909083] intel_idle: MWAIT substates: 0x21120
- [ 0.909084] intel_idle: v0.4 model 0x2A
- [ 0.909085] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 0.909684] ACPI: AC Adapter [AC] (off-line)
- [ 0.910038] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
- [ 0.910447] ACPI: Lid Switch [LID]
- [ 0.910478] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
- [ 0.910481] ACPI: Power Button [PBTN]
- [ 0.910505] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
- [ 0.910507] ACPI: Sleep Button [SBTN]
- [ 0.910531] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- [ 0.910533] ACPI: Power Button [PWRF]
- [ 0.910581] ACPI: Requesting acpi_cpufreq
- [ 0.949825] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.949828] ACPI: Thermal Zone [THM] (25 C)
- [ 0.949851] GHES: HEST is not enabled!
- [ 0.949933] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 0.959656] ACPI: Battery Slot [BAT0] (battery present)
- [ 0.971990] 0000:00:16.3: ttyS4 at I/O 0x50a0 (irq = 17) is a 16550A
- [ 0.977928] Linux agpgart interface v0.103
- [ 0.979020] brd: module loaded
- [ 0.979610] loop: module loaded
- [ 0.979867] libphy: Fixed MDIO Bus: probed
- [ 0.979932] tun: Universal TUN/TAP device driver, 1.6
- [ 0.979934] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.979971] PPP generic driver version 2.4.2
- [ 0.980005] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.980007] ehci-pci: EHCI PCI platform driver
- [ 0.981966] ehci-pci 0000:00:1a.0: setting latency timer to 64
- [ 0.981976] ehci-pci 0000:00:1a.0: EHCI Host Controller
- [ 0.981981] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 0.981996] ehci-pci 0000:00:1a.0: debug port 2
- [ 0.985911] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
- [ 0.985927] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe6770000
- [ 0.997851] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 0.997868] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.997870] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.997871] usb usb1: Product: EHCI Host Controller
- [ 0.997873] usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
- [ 0.997874] usb usb1: SerialNumber: 0000:00:1a.0
- [ 1.001987] hub 1-0:1.0: USB hub found
- [ 1.001991] hub 1-0:1.0: 3 ports detected
- [ 1.010103] ehci-pci 0000:00:1d.0: setting latency timer to 64
- [ 1.010110] ehci-pci 0000:00:1d.0: EHCI Host Controller
- [ 1.010113] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 1.010125] ehci-pci 0000:00:1d.0: debug port 2
- [ 1.010175] ACPI: Battery Slot [BAT1] (battery absent)
- [ 1.014021] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
- [ 1.014033] ehci-pci 0000:00:1d.0: irq 17, io mem 0xe6750000
- [ 1.025884] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 1.025896] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.025898] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.025900] usb usb2: Product: EHCI Host Controller
- [ 1.025901] usb usb2: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
- [ 1.025903] usb usb2: SerialNumber: 0000:00:1d.0
- [ 1.030089] hub 2-0:1.0: USB hub found
- [ 1.030092] hub 2-0:1.0: 3 ports detected
- [ 1.042122] ehci-platform: EHCI generic platform driver
- [ 1.042128] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.042129] ohci-platform: OHCI generic platform driver
- [ 1.042134] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.042168] ACPI: Battery Slot [BAT2] (battery absent)
- [ 1.042179] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 1.042551] i8042: Warning: Keylock active
- [ 1.043841] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.043846] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 1.043946] mousedev: PS/2 mouse device common for all mice
- [ 1.044105] rtc_cmos 00:05: RTC can wake from S4
- [ 1.044249] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
- [ 1.044280] rtc_cmos 00:05: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
- [ 1.044340] device-mapper: uevent: version 1.0.3
- [ 1.044408] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
- [ 1.044482] cpuidle: using governor ladder
- [ 1.044580] cpuidle: using governor menu
- [ 1.044592] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.044676] TCP: cubic registered
- [ 1.044745] NET: Registered protocol family 10
- [ 1.044906] NET: Registered protocol family 17
- [ 1.044915] Key type dns_resolver registered
- [ 1.045108] PM: Hibernation image not present or could not be loaded.
- [ 1.045111] Loading module verification certificates
- [ 1.045997] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fddf6943d8ac4f5b6eb0919a7a3ee3d9088b1bfa'
- [ 1.046007] registered taskstats version 1
- [ 1.046264] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
- [ 1.047890] Key type trusted registered
- [ 1.049509] Key type encrypted registered
- [ 1.051296] AppArmor: AppArmor sha1 policy hashing enabled
- [ 1.053611] Magic number: 9:619:425
- [ 1.053710] rtc_cmos 00:05: setting system clock to 2013-12-02 10:26:08 UTC (1385979968)
- [ 1.054429] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 1.054430] EDD information not available.
- [ 1.055177] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
- [ 1.055179] Write protecting the kernel read-only data: 12288k
- [ 1.057129] Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
- [ 1.058517] Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
- [ 1.068526] systemd-udevd[139]: starting version 204
- [ 1.083915] pps_core: module verification failed: signature and/or required key missing - tainting kernel
- [ 1.084137] pps_core: LinuxPPS API ver. 1 registered
- [ 1.084139] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 1.084349] PTP clock support registered
- [ 1.085246] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
- [ 1.085249] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
- [ 1.085406] e1000e 0000:00:19.0: setting latency timer to 64
- [ 1.085467] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
- [ 1.085496] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
- [ 1.285907] e1000e 0000:00:19.0 eth0: registered PHC clock
- [ 1.285912] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d4:be:d9:1e:9d:63
- [ 1.285914] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
- [ 1.285948] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 3041FF-0FF
- [ 1.285975] ahci 0000:00:1f.2: version 3.0
- [ 1.286142] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
- [ 1.286178] ahci: SSS flag set, parallel bus scan disabled
- [ 1.302264] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl RAID mode
- [ 1.302274] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
- [ 1.302285] ahci 0000:00:1f.2: setting latency timer to 64
- [ 1.322354] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 1.334760] scsi0 : ahci
- [ 1.334852] scsi1 : ahci
- [ 1.334962] scsi2 : ahci
- [ 1.335064] scsi3 : ahci
- [ 1.335159] scsi4 : ahci
- [ 1.335252] scsi5 : ahci
- [ 1.338453] ata1: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740100 irq 43
- [ 1.338457] ata2: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740180 irq 43
- [ 1.338458] ata3: DUMMY
- [ 1.338460] ata4: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740280 irq 43
- [ 1.338462] ata5: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740300 irq 43
- [ 1.338465] ata6: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740380 irq 43
- [ 1.454751] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
- [ 1.454753] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.455032] hub 1-1:1.0: USB hub found
- [ 1.455196] hub 1-1:1.0: 6 ports detected
- [ 1.566602] usb 2-1: new high-speed USB device number 2 using ehci-pci
- [ 1.658710] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.699076] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
- [ 1.699082] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.699499] hub 2-1:1.0: USB hub found
- [ 1.699691] hub 2-1:1.0: 8 ports detected
- [ 1.770889] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
- [ 1.819382] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
- [ 1.868452] usb 1-1.4: New USB device found, idVendor=413c, idProduct=8187
- [ 1.868457] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1.868460] usb 1-1.4: Product: DW375 Bluetooth Module
- [ 1.868463] usb 1-1.4: Manufacturer: Dell Computer Corp
- [ 1.868465] usb 1-1.4: SerialNumber: 9CB70D5375A7
- [ 1.878920] tsc: Refined TSC clocksource calibration: 2494.335 MHz
- [ 1.919048] ata1.00: supports DRM functions and may not be fully accessible
- [ 1.919055] ata1.00: ATA-8: ST9250414ASG, DED1, max UDMA/133
- [ 1.919058] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- [ 1.939134] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
- [ 1.943597] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
- [ 1.944033] ata1.00: supports DRM functions and may not be fully accessible
- [ 1.944054] ata1.00: configured for UDMA/133
- [ 1.951311] scsi 0:0:0:0: Direct-Access ATA ST9250414ASG DED1 PQ: 0 ANSI: 5
- [ 1.951527] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
- [ 1.951559] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.951629] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.951633] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.951654] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.032798] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
- [ 2.033753] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 2.195334] usb 1-1.5: New USB device found, idVendor=1bcf, idProduct=2b83
- [ 2.195340] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.195343] usb 1-1.5: Product: Laptop_Integrated_Webcam_FHD
- [ 2.195346] usb 1-1.5: Manufacturer: CNFB221I0410678A0502
- [ 2.271414] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 2.272778] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU60N, A102, max UDMA/133
- [ 2.274222] ata2.00: configured for UDMA/133
- [ 2.275601] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU60N A102 PQ: 0 ANSI: 5
- [ 2.279153] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 2.279158] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 2.279402] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 2.279674] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 2.483903] usb 2-1.2: new full-speed USB device number 3 using ehci-pci
- [ 2.580029] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c52b
- [ 2.580035] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.580038] usb 2-1.2: Product: USB Receiver
- [ 2.580040] usb 2-1.2: Manufacturer: Logitech
- [ 2.599786] ata4: SATA link down (SStatus 0 SControl 300)
- [ 2.651882] usb 2-1.8: new full-speed USB device number 4 using ehci-pci
- [ 2.767009] usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800
- [ 2.767015] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.767018] usb 2-1.8: Product: 5880
- [ 2.767021] usb 2-1.8: Manufacturer: Broadcom Corp
- [ 2.767023] usb 2-1.8: SerialNumber: 0123456789ABCD
- [ 2.767230] usb 2-1.8: config 0 descriptor??
- [ 2.880267] Switched to clocksource tsc
- [ 2.920142] ata5: SATA link down (SStatus 0 SControl 300)
- [ 3.240510] ata6: SATA link down (SStatus 0 SControl 300)
- [ 10.415868] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
- [ 15.477303] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
- [ 15.982443] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
- [ 16.088813] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
- [ 16.559025] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 16.950661] systemd-udevd[438]: starting version 204
- [ 18.007104] lp: driver loaded but no devices found
- [ 19.752972] parport_pc 00:07: [io 0x0378-0x037b]
- [ 19.754773] parport_pc 00:07: [irq 5]
- [ 19.810073] Loading modules backported from Linux version v3.11-rc3-0-g5ae90d8
- [ 19.810077] Backport generated by backports.git v3.11-rc3-1-0-g4e81a94
- [ 19.827308] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x23
- [ 19.851517] parport_pc 00:07: activated
- [ 19.851521] parport_pc 00:07: reported by Plug and Play ACPI
- [ 19.883581] parport_pc 00:07: disabled
- [ 19.992369] cfg80211: Calling CRDA to update world regulatory domain
- [ 20.143789] acpi device:16: registered as cooling_device4
- [ 20.163872] ACPI: Video Device [VID] (multi-head: yes rom: yes post: no)
- [ 20.163918] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:13/LNXVIDEO:00/input/input5
- [ 20.475050] Intel(R) Wireless WiFi driver for Linux, in-tree:d
- [ 20.475053] Copyright(c) 2003-2013 Intel Corporation
- [ 20.475079] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
- [ 20.475385] iwlwifi 0000:03:00.0: irq 44 for MSI/MSI-X
- [ 20.692287] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
- [ 21.189160] iwlwifi 0000:03:00.0: CPTCFG_IWLWIFI_DEBUG enabled
- [ 21.189165] iwlwifi 0000:03:00.0: CPTCFG_IWLWIFI_DEBUGFS enabled
- [ 21.189167] iwlwifi 0000:03:00.0: CPTCFG_IWLWIFI_DEVICE_TRACING enabled
- [ 21.189169] iwlwifi 0000:03:00.0: CPTCFG_IWLWIFI_P2P enabled
- [ 21.189171] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
- [ 21.189234] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
- [ 21.217025] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
- [ 21.221791] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
- [ 21.307827] autoconfig: line_outs=1 (0xe/0x0/0x0/0x0/0x0) type:line
- [ 21.307830] speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
- [ 21.307832] hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
- [ 21.307833] mono: mono_out=0x0
- [ 21.307833] inputs:
- [ 21.307835] Dock Mic=0xf
- [ 21.307836] Internal Mic=0x11
- [ 21.307837] Mic=0xa
- [ 21.320607] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
- [ 21.320685] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
- [ 21.320753] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
- [ 21.320820] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
- [ 21.321054] hda_intel: Disabling MSI
- [ 21.321060] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
- [ 21.321089] hda-intel 0000:01:00.1: Disabling 64bit DMA
- [ 21.323878] type=1400 audit(1385997988.743:2): apparmor="STATUS" operation="profile_load" parent=486 profile="unconfined" name="/sbin/dhclient" pid=488 comm="apparmor_parser"
- [ 21.323886] type=1400 audit(1385997988.743:3): apparmor="STATUS" operation="profile_load" parent=486 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=488 comm="apparmor_parser"
- [ 21.323892] type=1400 audit(1385997988.743:4): apparmor="STATUS" operation="profile_load" parent=486 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=488 comm="apparmor_parser"
- [ 21.324358] hda-intel 0000:01:00.1: Enable delay in RIRB handling
- [ 21.324499] type=1400 audit(1385997988.743:5): apparmor="STATUS" operation="profile_replace" parent=486 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=488 comm="apparmor_parser"
- [ 21.324507] type=1400 audit(1385997988.743:6): apparmor="STATUS" operation="profile_replace" parent=486 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=488 comm="apparmor_parser"
- [ 21.324831] type=1400 audit(1385997988.743:7): apparmor="STATUS" operation="profile_replace" parent=486 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=488 comm="apparmor_parser"
- [ 21.420895] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input10
- [ 21.433787] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input11
- [ 21.583535] ppdev: user-space parallel port driver
- [ 21.588141] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x23
- [ 21.718333] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x23
- [ 21.718745] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x23
- [ 21.719183] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 21.749639] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
- [ 21.749712] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
- [ 21.749779] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
- [ 22.500438] cfg80211: World regulatory domain updated:
- [ 22.500442] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 22.500444] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 22.500445] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 22.500446] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 22.500447] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 22.500448] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 23.058975] init: failsafe main process (572) killed by TERM signal
- [ 23.755893] init: bluetooth main process (689) terminated with status 1
- [ 23.755912] init: bluetooth main process ended, respawning
- [ 23.936221] init: bluetooth main process (779) terminated with status 1
- [ 23.936240] init: bluetooth main process ended, respawning
- [ 23.955382] init: bluetooth main process (803) terminated with status 1
- [ 23.955411] init: bluetooth main process ended, respawning
- [ 23.976192] init: bluetooth main process (827) terminated with status 1
- [ 23.976211] init: bluetooth main process ended, respawning
- [ 23.993295] init: bluetooth main process (851) terminated with status 1
- [ 23.993314] init: bluetooth main process ended, respawning
- [ 24.012286] init: bluetooth main process (875) terminated with status 1
- [ 24.012303] init: bluetooth main process ended, respawning
- [ 24.029624] init: bluetooth main process (899) terminated with status 1
- [ 24.029644] init: bluetooth main process ended, respawning
- [ 24.047499] init: bluetooth main process (923) terminated with status 1
- [ 24.047518] init: bluetooth main process ended, respawning
- [ 24.064953] init: bluetooth main process (947) terminated with status 1
- [ 24.064973] init: bluetooth main process ended, respawning
- [ 24.082836] init: bluetooth main process (971) terminated with status 1
- [ 24.082863] init: bluetooth main process ended, respawning
- [ 24.100525] init: bluetooth main process (995) terminated with status 1
- [ 24.100543] init: bluetooth respawning too fast, stopped
- [ 24.425519] nvidia: module license 'NVIDIA' taints kernel.
- [ 24.425523] Disabling lock debugging due to kernel taint
- [ 24.432123] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 24.432190] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
- [ 24.727034] type=1400 audit(1385997992.143:8): apparmor="STATUS" operation="profile_replace" parent=1020 profile="unconfined" name="/sbin/dhclient" pid=1029 comm="apparmor_parser"
- [ 24.727041] type=1400 audit(1385997992.143:9): apparmor="STATUS" operation="profile_replace" parent=1020 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1029 comm="apparmor_parser"
- [ 24.727044] type=1400 audit(1385997992.143:10): apparmor="STATUS" operation="profile_replace" parent=1020 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1029 comm="apparmor_parser"
- [ 24.727444] type=1400 audit(1385997992.143:11): apparmor="STATUS" operation="profile_replace" parent=1020 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1029 comm="apparmor_parser"
- [ 25.369251] init: avahi-cups-reload main process (1039) terminated with status 1
- [ 28.020410] init: gdm main process (1248) killed by TERM signal
- [ 28.665854] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
- [ 28.769643] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
- [ 28.769829] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 28.770131] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 28.771705] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
- [ 28.771907] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
- [ 29.038531] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
- [ 29.038735] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
- [ 29.117625] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 29.118036] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 29.197191] audit_printk_skb: 165 callbacks suppressed
- [ 29.197194] type=1400 audit(1385997996.607:67): apparmor="STATUS" operation="profile_replace" parent=1412 profile="unconfined" name="/usr/sbin/mysqld" pid=1425 comm="apparmor_parser"
- [ 36.238488] wlan0: authenticate with 5c:50:15:25:bd:5f
- [ 36.247746] wlan0: send auth to 5c:50:15:25:bd:5f (try 1/3)
- [ 36.312266] wlan0: authenticated
- [ 36.312683] wlan0: waiting for beacon from 5c:50:15:25:bd:5f
- [ 36.418417] wlan0: associate with 5c:50:15:25:bd:5f (try 1/3)
- [ 36.420792] wlan0: RX AssocResp from 5c:50:15:25:bd:5f (capab=0x1 status=0 aid=135)
- [ 36.439230] wlan0: associated
- [ 36.439310] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 36.439503] cfg80211: Calling CRDA for country: US
- [ 36.444547] cfg80211: Regulatory domain changed to country: US
- [ 36.444556] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 36.444562] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
- [ 36.444567] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
- [ 36.444571] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 36.444575] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 36.444580] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 36.444584] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
- [ 36.444589] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- [ 39.058006] init: udev-fallback-graphics main process (1820) terminated with status 1
- [ 39.480808] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
- [ 39.480964] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
- [ 39.481071] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
- [ 39.481172] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
- [ 39.481273] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
- [ 39.510022] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
- [ 39.510213] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
- [ 39.510263] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
- [ 39.915119] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
- [ 40.942203] bio: create slab <bio-1> at 1
- [ 44.556309] Adding 3905532k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:3905532k FS
- [ 46.050921] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
- [ 46.051027] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
- [ 46.051101] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
- [ 46.051171] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
- [ 46.051241] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
- [ 46.085602] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
- [ 46.086361] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
- [ 46.086555] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
- [ 46.173880] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
- [ 75.028309] usb 2-1.1: new low-speed USB device number 5 using ehci-pci
- [ 75.141904] usb 2-1.1: New USB device found, idVendor=045e, idProduct=00db
- [ 75.141910] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 75.141914] usb 2-1.1: Product: Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000
- [ 75.141917] usb 2-1.1: Manufacturer: Microsoft
- [ 83.763278] init: ureadahead main process (257) terminated with status 5
- [ 148.889679] e1000e 0000:00:19.0: setting latency timer to 64
- [ 148.889750] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
- [ 885.989239] usb 2-1.1: USB disconnect, device number 5
- [ 1191.635179] wlan0: authenticate with 5c:50:15:25:bd:50
- [ 1191.639967] wlan0: direct probe to 5c:50:15:25:bd:50 (try 1/3)
- [ 1191.640109] cfg80211: Calling CRDA to update world regulatory domain
- [ 1191.696054] cfg80211: World regulatory domain updated:
- [ 1191.696056] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 1191.696058] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1191.696059] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1191.696061] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 1191.696062] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1191.696063] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1191.874793] wlan0: direct probe to 5c:50:15:25:bd:50 (try 2/3)
- [ 1192.076388] wlan0: direct probe to 5c:50:15:25:bd:50 (try 3/3)
- [ 1192.280574] wlan0: authentication with 5c:50:15:25:bd:50 timed out
- [ 1195.461617] wlan0: authenticate with 5c:50:15:25:c7:e0
- [ 1195.465470] wlan0: direct probe to 5c:50:15:25:c7:e0 (try 1/3)
- [ 1195.668437] wlan0: direct probe to 5c:50:15:25:c7:e0 (try 2/3)
- [ 1195.872763] wlan0: direct probe to 5c:50:15:25:c7:e0 (try 3/3)
- [ 1196.076967] wlan0: authentication with 5c:50:15:25:c7:e0 timed out
- [ 1196.243199] wlan0: authenticate with f4:1f:c2:8a:90:a0
- [ 1196.254966] wlan0: direct probe to f4:1f:c2:8a:90:a0 (try 1/3)
- [ 1196.457351] wlan0: direct probe to f4:1f:c2:8a:90:a0 (try 2/3)
- [ 1196.661582] wlan0: direct probe to f4:1f:c2:8a:90:a0 (try 3/3)
- [ 1196.865900] wlan0: authentication with f4:1f:c2:8a:90:a0 timed out
- [ 1200.140825] wlan0: authenticate with 5c:50:15:25:bd:5f
- [ 1200.144747] wlan0: send auth to 5c:50:15:25:bd:5f (try 1/3)
- [ 1200.189144] wlan0: authenticated
- [ 1200.189621] wlan0: associate with 5c:50:15:25:bd:5f (try 1/3)
- [ 1200.198094] wlan0: RX AssocResp from 5c:50:15:25:bd:5f (capab=0x1 status=0 aid=135)
- [ 1200.216596] wlan0: associated
- [ 1200.216786] cfg80211: Calling CRDA for country: US
- [ 1200.224200] cfg80211: Regulatory domain changed to country: US
- [ 1200.224210] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 1200.224216] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
- [ 1200.224221] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
- [ 1200.224226] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1200.224230] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1200.224234] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1200.224238] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
- [ 1200.224243] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- [ 2124.329911] usb 2-1.1: new low-speed USB device number 6 using ehci-pci
- [ 2124.442662] usb 2-1.1: New USB device found, idVendor=045e, idProduct=00db
- [ 2124.442666] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2124.442669] usb 2-1.1: Product: Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000
- [ 2124.442671] usb 2-1.1: Manufacturer: Microsoft
- [ 2169.186277] hardinfo[16113]: segfault at 30 ip 00007f299d43e6db sp 00007fffe0b7cd60 error 4 in libgtk-x11-2.0.so.0.2400.20[7f299d219000+42f000]
- [ 2272.997227] wlan0: authenticate with 5c:50:15:25:bd:50
- [ 2273.003689] wlan0: direct probe to 5c:50:15:25:bd:50 (try 1/3)
- [ 2273.006015] cfg80211: Calling CRDA to update world regulatory domain
- [ 2273.159364] cfg80211: World regulatory domain updated:
- [ 2273.159369] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 2273.159372] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2273.159374] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2273.159376] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 2273.159378] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2273.159380] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2273.246652] wlan0: direct probe to 5c:50:15:25:bd:50 (try 2/3)
- [ 2273.547985] wlan0: direct probe to 5c:50:15:25:bd:50 (try 3/3)
- [ 2273.757194] wlan0: authentication with 5c:50:15:25:bd:50 timed out
- [ 2273.798439] wlan0: authenticate with 5c:50:15:25:c7:ef
- [ 2273.801094] wlan0: send auth to 5c:50:15:25:c7:ef (try 1/3)
- [ 2273.837231] wlan0: authenticated
- [ 2273.995569] wlan0: authenticate with 5c:50:15:25:84:10
- [ 2274.003011] wlan0: send auth to 5c:50:15:25:84:10 (try 1/3)
- [ 2274.006287] wlan0: authenticated
- [ 2274.008881] wlan0: associate with 5c:50:15:25:84:10 (try 1/3)
- [ 2274.014130] wlan0: RX AssocResp from 5c:50:15:25:84:10 (capab=0x421 status=0 aid=2)
- [ 2274.032562] wlan0: associated
- [ 2274.032632] cfg80211: Calling CRDA for country: US
- [ 2274.035089] cfg80211: Regulatory domain changed to country: US
- [ 2274.035094] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 2274.035096] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
- [ 2274.035098] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
- [ 2274.035100] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2274.035102] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2274.035104] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2274.035105] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
- [ 2274.035107] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- [ 2455.991539] cfg80211: Calling CRDA to update world regulatory domain
- [ 2455.999303] cfg80211: World regulatory domain updated:
- [ 2455.999314] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 2455.999320] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2455.999325] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2455.999330] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 2455.999335] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2455.999339] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2459.253093] wlan0: authenticate with 5c:50:15:25:bd:5f
- [ 2459.260894] wlan0: send auth to 5c:50:15:25:bd:5f (try 1/3)
- [ 2459.328307] wlan0: authenticated
- [ 2459.328715] wlan0: waiting for beacon from 5c:50:15:25:bd:5f
- [ 2459.432799] wlan0: associate with 5c:50:15:25:bd:5f (try 1/3)
- [ 2459.435324] wlan0: RX AssocResp from 5c:50:15:25:bd:5f (capab=0x1 status=0 aid=139)
- [ 2459.453641] wlan0: associated
- [ 2459.453831] cfg80211: Calling CRDA for country: US
- [ 2459.462049] cfg80211: Regulatory domain changed to country: US
- [ 2459.462058] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 2459.462064] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
- [ 2459.462069] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
- [ 2459.462073] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2459.462078] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2459.462082] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2459.462087] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
- [ 2459.462091] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- [ 2873.658125] wlan0: authenticate with 5c:50:15:25:bd:50
- [ 2873.663975] wlan0: direct probe to 5c:50:15:25:bd:50 (try 1/3)
- [ 2873.664061] cfg80211: Calling CRDA to update world regulatory domain
- [ 2873.670002] cfg80211: World regulatory domain updated:
- [ 2873.670009] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 2873.670013] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2873.670018] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2873.670021] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 2873.670024] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2873.670028] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2873.891924] wlan0: direct probe to 5c:50:15:25:bd:50 (try 2/3)
- [ 2874.094719] wlan0: direct probe to 5c:50:15:25:bd:50 (try 3/3)
- [ 2874.298932] wlan0: authentication with 5c:50:15:25:bd:50 timed out
- [ 2877.431640] wlan0: authenticate with 5c:50:15:25:b4:30
- [ 2877.434073] wlan0: direct probe to 5c:50:15:25:b4:30 (try 1/3)
- [ 2877.634790] wlan0: direct probe to 5c:50:15:25:b4:30 (try 2/3)
- [ 2877.839023] wlan0: direct probe to 5c:50:15:25:b4:30 (try 3/3)
- [ 2878.043251] wlan0: authentication with 5c:50:15:25:b4:30 timed out
- [ 2881.171387] wlan0: authenticate with 5c:50:15:25:bd:5f
- [ 2881.175240] wlan0: send auth to 5c:50:15:25:bd:5f (try 1/3)
- [ 2881.278468] wlan0: authenticated
- [ 2881.278929] wlan0: associate with 5c:50:15:25:bd:5f (try 1/3)
- [ 2881.285826] wlan0: RX AssocResp from 5c:50:15:25:bd:5f (capab=0x1 status=0 aid=139)
- [ 2881.304112] wlan0: associated
- [ 2881.305118] cfg80211: Calling CRDA for country: US
- [ 2881.312485] cfg80211: Regulatory domain changed to country: US
- [ 2881.312496] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 2881.312505] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
- [ 2881.312514] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
- [ 2881.312521] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2881.312527] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2881.312534] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2881.312542] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
- [ 2881.312549] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- [ 3114.064925] wlan0: authenticate with 5c:50:15:25:bd:50
- [ 3114.073176] wlan0: direct probe to 5c:50:15:25:bd:50 (try 1/3)
- [ 3114.073276] cfg80211: Calling CRDA to update world regulatory domain
- [ 3114.076089] cfg80211: World regulatory domain updated:
- [ 3114.076092] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 3114.076094] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3114.076095] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3114.076096] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 3114.076097] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3114.076098] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3114.301285] wlan0: direct probe to 5c:50:15:25:bd:50 (try 2/3)
- [ 3114.505444] wlan0: direct probe to 5c:50:15:25:bd:50 (try 3/3)
- [ 3114.709669] wlan0: authentication with 5c:50:15:25:bd:50 timed out
- [ 3117.976189] wlan0: authenticate with 5c:50:15:25:b4:30
- [ 3117.981913] wlan0: direct probe to 5c:50:15:25:b4:30 (try 1/3)
- [ 3118.185689] wlan0: direct probe to 5c:50:15:25:b4:30 (try 2/3)
- [ 3118.389887] wlan0: direct probe to 5c:50:15:25:b4:30 (try 3/3)
- [ 3118.594147] wlan0: authentication with 5c:50:15:25:b4:30 timed out
- [ 3118.786640] wlan0: authenticate with f4:1f:c2:fa:b6:c0
- [ 3118.793675] wlan0: direct probe to f4:1f:c2:fa:b6:c0 (try 1/3)
- [ 3118.994599] wlan0: direct probe to f4:1f:c2:fa:b6:c0 (try 2/3)
- [ 3119.198835] wlan0: direct probe to f4:1f:c2:fa:b6:c0 (try 3/3)
- [ 3119.403107] wlan0: authentication with f4:1f:c2:fa:b6:c0 timed out
- [ 3119.597408] wlan0: authenticate with 5c:50:15:25:81:30
- [ 3119.601632] wlan0: direct probe to 5c:50:15:25:81:30 (try 1/3)
- [ 3119.803518] wlan0: direct probe to 5c:50:15:25:81:30 (try 2/3)
- [ 3120.007817] wlan0: direct probe to 5c:50:15:25:81:30 (try 3/3)
- [ 3120.211965] wlan0: authentication with 5c:50:15:25:81:30 timed out
- [ 3120.421262] wlan0: authenticate with 00:1a:30:2f:69:50
- [ 3120.427304] wlan0: send auth to 00:1a:30:2f:69:50 (try 1/3)
- [ 3120.536430] wlan0: send auth to 00:1a:30:2f:69:50 (try 2/3)
- [ 3120.644499] wlan0: send auth to 00:1a:30:2f:69:50 (try 3/3)
- [ 3120.646288] wlan0: authenticated
- [ 3120.646692] wlan0: waiting for beacon from 00:1a:30:2f:69:50
- [ 3120.947236] wlan0: authenticate with 00:13:c4:64:8d:e0
- [ 3120.953475] wlan0: send auth to 00:13:c4:64:8d:e0 (try 1/3)
- [ 3121.002246] wlan0: authenticated
- [ 3121.002676] wlan0: waiting for beacon from 00:13:c4:64:8d:e0
- [ 3121.267029] wlan0: authenticate with 5c:50:15:25:b1:10
- [ 3121.273122] wlan0: direct probe to 5c:50:15:25:b1:10 (try 1/3)
- [ 3121.477430] wlan0: direct probe to 5c:50:15:25:b1:10 (try 2/3)
- [ 3121.681685] wlan0: direct probe to 5c:50:15:25:b1:10 (try 3/3)
- [ 3121.885889] wlan0: authentication with 5c:50:15:25:b1:10 timed out
- [ 3125.131751] wlan0: authenticate with 5c:50:15:25:bd:5f
- [ 3125.136298] wlan0: send auth to 5c:50:15:25:bd:5f (try 1/3)
- [ 3125.237195] wlan0: authenticated
- [ 3125.237784] wlan0: associate with 5c:50:15:25:bd:5f (try 1/3)
- [ 3125.246861] wlan0: RX AssocResp from 5c:50:15:25:bd:5f (capab=0x1 status=0 aid=139)
- [ 3125.265639] wlan0: associated
- [ 3125.265917] cfg80211: Calling CRDA for country: US
- [ 3125.273470] cfg80211: Regulatory domain changed to country: US
- [ 3125.273479] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 3125.273485] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
- [ 3125.273491] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
- [ 3125.273495] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3125.273499] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3125.273503] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3125.273508] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
- [ 3125.273512] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- [ 3234.011963] wlan0: authenticate with 5c:50:15:25:bd:50
- [ 3234.016187] wlan0: direct probe to 5c:50:15:25:bd:50 (try 1/3)
- [ 3234.016692] cfg80211: Calling CRDA to update world regulatory domain
- [ 3234.025397] cfg80211: World regulatory domain updated:
- [ 3234.025406] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 3234.025411] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3234.025416] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3234.025421] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 3234.025425] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3234.025429] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3234.257079] wlan0: direct probe to 5c:50:15:25:bd:50 (try 2/3)
- [ 3234.478594] wlan0: direct probe to 5c:50:15:25:bd:50 (try 3/3)
- [ 3234.682840] wlan0: authentication with 5c:50:15:25:bd:50 timed out
- [ 3234.808833] wlan0: authenticate with 5c:50:15:25:b4:30
- [ 3234.813721] wlan0: direct probe to 5c:50:15:25:b4:30 (try 1/3)
- [ 3235.015503] wlan0: direct probe to 5c:50:15:25:b4:30 (try 2/3)
- [ 3235.219479] wlan0: direct probe to 5c:50:15:25:b4:30 (try 3/3)
- [ 3235.423675] wlan0: authentication with 5c:50:15:25:b4:30 timed out
- [ 3235.574840] wlan0: authenticate with 00:1a:30:2f:69:50
- [ 3235.576616] wlan0: send auth to 00:1a:30:2f:69:50 (try 1/3)
- [ 3235.600746] wlan0: send auth to 00:1a:30:2f:69:50 (try 2/3)
- [ 3235.604121] wlan0: authenticated
- [ 3235.604520] wlan0: waiting for beacon from 00:1a:30:2f:69:50
- [ 3239.012652] wlan0: authenticate with 5c:50:15:25:bd:5f
- [ 3239.017211] wlan0: send auth to 5c:50:15:25:bd:5f (try 1/3)
- [ 3239.115005] wlan0: authenticated
- [ 3239.115867] wlan0: associate with 5c:50:15:25:bd:5f (try 1/3)
- [ 3239.124656] wlan0: RX AssocResp from 5c:50:15:25:bd:5f (capab=0x1 status=0 aid=139)
- [ 3239.143258] wlan0: associated
- [ 3239.143460] cfg80211: Calling CRDA for country: US
- [ 3239.152713] cfg80211: Regulatory domain changed to country: US
- [ 3239.152725] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 3239.152734] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
- [ 3239.152741] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
- [ 3239.152747] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3239.152754] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3239.152761] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3239.152768] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
- [ 3239.152774] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- [ 3714.824600] wlan0: authenticate with 5c:50:15:25:bd:50
- [ 3714.829327] wlan0: direct probe to 5c:50:15:25:bd:50 (try 1/3)
- [ 3714.831066] cfg80211: Calling CRDA to update world regulatory domain
- [ 3714.834015] cfg80211: World regulatory domain updated:
- [ 3714.834021] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 3714.834023] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3714.834026] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3714.834027] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 3714.834030] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3714.834031] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3715.075872] wlan0: direct probe to 5c:50:15:25:bd:50 (try 2/3)
- [ 3715.285045] wlan0: direct probe to 5c:50:15:25:bd:50 (try 3/3)
- [ 3715.488292] wlan0: authentication with 5c:50:15:25:bd:50 timed out
- [ 3715.649536] wlan0: authenticate with 5c:50:15:25:b4:30
- [ 3715.651535] wlan0: direct probe to 5c:50:15:25:b4:30 (try 1/3)
- [ 3715.852849] wlan0: direct probe to 5c:50:15:25:b4:30 (try 2/3)
- [ 3716.056980] wlan0: direct probe to 5c:50:15:25:b4:30 (try 3/3)
- [ 3716.261264] wlan0: authentication with 5c:50:15:25:b4:30 timed out
- [ 3716.452926] wlan0: authenticate with f4:1f:c2:fa:b6:c0
- [ 3716.458586] wlan0: direct probe to f4:1f:c2:fa:b6:c0 (try 1/3)
- [ 3716.661715] wlan0: direct probe to f4:1f:c2:fa:b6:c0 (try 2/3)
- [ 3716.865884] wlan0: direct probe to f4:1f:c2:fa:b6:c0 (try 3/3)
- [ 3717.070116] wlan0: authentication with f4:1f:c2:fa:b6:c0 timed out
- [ 3717.223482] wlan0: authenticate with 00:1d:a2:88:04:20
- [ 3717.227285] wlan0: direct probe to 00:1d:a2:88:04:20 (try 1/3)
- [ 3717.430535] wlan0: direct probe to 00:1d:a2:88:04:20 (try 2/3)
- [ 3717.634823] wlan0: direct probe to 00:1d:a2:88:04:20 (try 3/3)
- [ 3717.839007] wlan0: authentication with 00:1d:a2:88:04:20 timed out
- [ 3717.992464] wlan0: authenticate with 0c:85:25:9e:cc:20
- [ 3717.993965] wlan0: direct probe to 0c:85:25:9e:cc:20 (try 1/3)
- [ 3718.195454] wlan0: direct probe to 0c:85:25:9e:cc:20 (try 2/3)
- [ 3718.399646] wlan0: direct probe to 0c:85:25:9e:cc:20 (try 3/3)
- [ 3718.603936] wlan0: authentication with 0c:85:25:9e:cc:20 timed out
- [ 3721.841313] wlan0: authenticate with 5c:50:15:25:bd:5f
- [ 3721.845774] wlan0: send auth to 5c:50:15:25:bd:5f (try 1/3)
- [ 3721.920060] wlan0: authenticated
- [ 3721.923674] wlan0: associate with 5c:50:15:25:bd:5f (try 1/3)
- [ 3721.929246] wlan0: RX AssocResp from 5c:50:15:25:bd:5f (capab=0x1 status=0 aid=139)
- [ 3721.947811] wlan0: associated
- [ 3721.947977] cfg80211: Calling CRDA for country: US
- [ 3721.955185] cfg80211: Regulatory domain changed to country: US
- [ 3721.955194] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 3721.955201] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
- [ 3721.955205] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
- [ 3721.955209] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3721.955213] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3721.955216] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3721.955220] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
- [ 3721.955223] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- [ 4075.073785] wlan0: authenticate with 5c:50:15:25:bd:50
- [ 4075.093884] wlan0: direct probe to 5c:50:15:25:bd:50 (try 1/3)
- [ 4075.096318] cfg80211: Calling CRDA to update world regulatory domain
- [ 4075.103578] cfg80211: World regulatory domain updated:
- [ 4075.103587] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 4075.103593] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 4075.103598] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 4075.103603] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 4075.103607] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 4075.103612] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 4075.295545] wlan0: direct probe to 5c:50:15:25:bd:50 (try 2/3)
- [ 4075.499784] wlan0: direct probe to 5c:50:15:25:bd:50 (try 3/3)
- [ 4078.713911] wlan0: authentication with 5c:50:15:25:bd:50 timed out
- [ 4078.739802] wlan0: authenticate with 5c:50:15:25:b4:30
- [ 4078.741894] wlan0: direct probe to 5c:50:15:25:b4:30 (try 1/3)
- [ 4081.979990] wlan0: direct probe to 5c:50:15:25:b4:30 (try 2/3)
- [ 4085.254484] wlan0: direct probe to 5c:50:15:25:b4:30 (try 3/3)
- [ 4085.455295] wlan0: authentication with 5c:50:15:25:b4:30 timed out
- [ 4085.493545] wlan0: authenticate with 5c:50:15:25:c7:ef
- [ 4085.497719] wlan0: send auth to 5c:50:15:25:c7:ef (try 1/3)
- [ 4085.539503] wlan0: authenticated
- [ 4085.643158] wlan0: authenticate with 5c:50:15:25:bd:50
- [ 4085.648283] wlan0: direct probe to 5c:50:15:25:bd:50 (try 1/3)
- [ 4085.851660] wlan0: direct probe to 5c:50:15:25:bd:50 (try 2/3)
- [ 4086.055826] wlan0: direct probe to 5c:50:15:25:bd:50 (try 3/3)
- [ 4086.260086] wlan0: authentication with 5c:50:15:25:bd:50 timed out
- [ 4086.409968] wlan0: authenticate with f4:1f:c2:fa:b6:c0
- [ 4086.411937] wlan0: direct probe to f4:1f:c2:fa:b6:c0 (try 1/3)
- [ 4086.612455] wlan0: direct probe to f4:1f:c2:fa:b6:c0 (try 2/3)
- [ 4086.816723] wlan0: direct probe to f4:1f:c2:fa:b6:c0 (try 3/3)
- [ 4087.020923] wlan0: authentication with f4:1f:c2:fa:b6:c0 timed out
- [ 4087.172109] wlan0: authenticate with 5c:50:15:25:b4:30
- [ 4087.175797] wlan0: direct probe to 5c:50:15:25:b4:30 (try 1/3)
- [ 4087.377392] wlan0: direct probe to 5c:50:15:25:b4:30 (try 2/3)
- [ 4087.581595] wlan0: direct probe to 5c:50:15:25:b4:30 (try 3/3)
- [ 4087.785824] wlan0: authentication with 5c:50:15:25:b4:30 timed out
- [ 4087.939815] wlan0: authenticate with 00:1a:30:2f:69:50
- [ 4087.942115] wlan0: send auth to 00:1a:30:2f:69:50 (try 1/3)
- [ 4087.966185] wlan0: send auth to 00:1a:30:2f:69:50 (try 2/3)
- [ 4088.086157] wlan0: send auth to 00:1a:30:2f:69:50 (try 3/3)
- [ 4088.206291] wlan0: authentication with 00:1a:30:2f:69:50 timed out
- [ 4091.427521] wlan0: authenticate with 5c:50:15:25:bd:50
- [ 4091.429492] wlan0: direct probe to 5c:50:15:25:bd:50 (try 1/3)
- [ 4091.630171] wlan0: direct probe to 5c:50:15:25:bd:50 (try 2/3)
- [ 4091.675402] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 4091.834406] wlan0: direct probe to 5c:50:15:25:bd:50 (try 3/3)
- [ 4092.038655] wlan0: authentication with 5c:50:15:25:bd:50 timed out
- [ 4096.126569] wlan0: authenticate with 5c:50:15:25:bd:5f
- [ 4096.132130] wlan0: send auth to 5c:50:15:25:bd:5f (try 1/3)
- [ 4096.202069] wlan0: authenticated
- [ 4096.203418] wlan0: associate with 5c:50:15:25:bd:5f (try 1/3)
- [ 4096.211440] wlan0: RX AssocResp from 5c:50:15:25:bd:5f (capab=0x1 status=0 aid=139)
- [ 4096.229819] wlan0: associated
- [ 4096.230651] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 4096.230875] cfg80211: Calling CRDA for country: US
- [ 4096.240012] cfg80211: Regulatory domain changed to country: US
- [ 4096.240022] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 4096.240028] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
- [ 4096.240033] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
- [ 4096.240037] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 4096.240042] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 4096.240046] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 4096.240050] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
- [ 4096.240055] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- [ 4776.745680] wlan0: authenticate with 5c:50:15:25:bd:50
- [ 4776.749902] wlan0: direct probe to 5c:50:15:25:bd:50 (try 1/3)
- [ 4776.751269] cfg80211: Calling CRDA to update world regulatory domain
- [ 4776.793027] cfg80211: World regulatory domain updated:
- [ 4776.793030] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 4776.793032] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 4776.793033] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 4776.793034] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 4776.793035] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 4776.793036] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 4776.985682] wlan0: direct probe to 5c:50:15:25:bd:50 (try 2/3)
- [ 4777.187990] wlan0: direct probe to 5c:50:15:25:bd:50 (try 3/3)
- [ 4777.392177] wlan0: authentication with 5c:50:15:25:bd:50 timed out
- [ 4777.492941] wlan0: authenticate with 5c:50:15:25:b4:30
- [ 4777.495411] wlan0: direct probe to 5c:50:15:25:b4:30 (try 1/3)
- [ 4777.696636] wlan0: direct probe to 5c:50:15:25:b4:30 (try 2/3)
- [ 4777.900830] wlan0: direct probe to 5c:50:15:25:b4:30 (try 3/3)
- [ 4778.105104] wlan0: authentication with 5c:50:15:25:b4:30 timed out
- [ 4778.256363] wlan0: authenticate with 00:13:c4:64:8d:e0
- [ 4778.259415] wlan0: send auth to 00:13:c4:64:8d:e0 (try 1/3)
- [ 4778.260959] wlan0: authenticated
- [ 4778.261364] wlan0: waiting for beacon from 00:13:c4:64:8d:e0
- [ 4781.647495] wlan0: authenticate with 5c:50:15:25:81:30
- [ 4781.653873] wlan0: direct probe to 5c:50:15:25:81:30 (try 1/3)
- [ 4781.857256] wlan0: direct probe to 5c:50:15:25:81:30 (try 2/3)
- [ 4782.061564] wlan0: direct probe to 5c:50:15:25:81:30 (try 3/3)
- [ 4782.265859] wlan0: authentication with 5c:50:15:25:81:30 timed out
- [ 4785.478632] wlan0: authenticate with 5c:50:15:25:bd:50
- [ 4785.483334] wlan0: direct probe to 5c:50:15:25:bd:50 (try 1/3)
- [ 4785.685770] wlan0: direct probe to 5c:50:15:25:bd:50 (try 2/3)
- [ 4785.890005] wlan0: direct probe to 5c:50:15:25:bd:50 (try 3/3)
- [ 4786.094161] wlan0: authentication with 5c:50:15:25:bd:50 timed out
- [ 4786.414199] wlan0: authenticate with 5c:50:15:25:bd:5f
- [ 4786.419327] wlan0: send auth to 5c:50:15:25:bd:5f (try 1/3)
- [ 4786.431750] wlan0: authenticated
- [ 4786.434728] wlan0: associate with 5c:50:15:25:bd:5f (try 1/3)
- [ 4786.442920] wlan0: RX AssocResp from 5c:50:15:25:bd:5f (capab=0x1 status=0 aid=139)
- [ 4786.461820] wlan0: associated
- [ 4786.461993] cfg80211: Calling CRDA for country: US
- [ 4786.469326] cfg80211: Regulatory domain changed to country: US
- [ 4786.469335] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 4786.469341] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
- [ 4786.469346] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
- [ 4786.469350] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 4786.469355] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 4786.469359] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 4786.469363] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
- [ 4786.469368] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- [ 8861.668025] perf samples too long (2577 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
- [15318.248417] usb 2-1.1: USB disconnect, device number 6
- [15319.985337] usb 2-1.1: new low-speed USB device number 7 using ehci-pci
- [15320.097929] usb 2-1.1: New USB device found, idVendor=045e, idProduct=00db
- [15320.097941] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [15320.097947] usb 2-1.1: Product: Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000
- [15320.097952] usb 2-1.1: Manufacturer: Microsoft
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement