API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Feb 10th, 2017
230
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 30.64 KB | None | 0 0
raw download clone embed print report
  1. Welcome to minicom 2.7
  2.  
  3. OPTIONS: I18n
  4. Compiled on Feb 7 2016, 13:37:27.
  5. Port /dev/ttyUSB0, 14:47:45
  6.  
  7. Press CTRL-A Z for help on special keys
  8.  
  9. MM��444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444444�U-Boot SPL 2015.04-21123-g7271b51 (Jul 22 2016 - 14:15:22)
  10. Setting 1024MB RAM calibration data
  11. port 1
  12. SPL: u-boot second stage will be loaded from MMC0
  13.  
  14.  
  15. U-Boot 2015.04-21123-g7271b51 (Jul 22 2016 - 14:15:22)
  16.  
  17. CPU: Freescale i.MX6SX rev1.2 at 792 MHz
  18. CPU: Temperature 53 C
  19. Reset cause: POR
  20. Board: UDOO Neo Full
  21. I2C: ready
  22. DRAM: 1 GiB
  23. PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
  24. MMC: FSL_SDHC: 0, FSL_SDHC: 1
  25. *** Warning - bad CRC, using default environment
  26.  
  27. In: serial
  28. Out: serial
  29. Err: serial
  30. Net: using phy at 0
  31. FEC0 [PRIME]
  32. Normal Boot
  33. Hit any key to stop autoboot: 0
  34. switch to partitions #0, OK
  35. mmc0 is current device
  36. reading uEnv.txt
  37. 183 bytes read in 9 ms (19.5 KiB/s)
  38. Running bootscript from mmc ...
  39. Device Tree: dts-overlay/imx6sx-udoo-neo-full-hdmi-m4.dtb
  40. ## Error: "m4boot" not defined
  41. reading /zImage
  42. 4217848 bytes read in 213 ms (18.9 MiB/s)
  43. Booting from mmc ...
  44. reading dts-overlay/imx6sx-udoo-neo-full-hdmi-m4.dtb
  45. 45920 bytes read in 31 ms (1.4 MiB/s)
  46. Kernel image @ 0x80800000 [ 0x000000 - 0x405bf8 ]
  47. ## Flattened Device Tree blob at 83000000
  48. Booting using the fdt blob at 0x83000000
  49. Using Device Tree in place at 83000000, end 8300e35f
  50. Switched to ldo_bypass mode!
  51.  
  52. Starting kernel ...
  53.  
  54. [ 0.000000] Booting Linux on physical CPU 0x0
  55. [ 0.000000] Linux version 3.14.56-gacf7670-dirty (gorgo@dago) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #2 SMP PREEMPT Thu Feb 9 19:56:26 CET 2017
  56. [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
  57. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  58. [ 0.000000] Machine model: UDOO Neo Full
  59. [ 0.000000] Reserved memory: reserved region for node 'm4@0x84000000': base 0x84000000, size 8 MiB
  60. [ 0.000000] Reserved memory: reserved region for node 'm4@0xBFF00000': base 0xbff00000, size 1 MiB
  61. [ 0.000000] cma: CMA: reserved 320 MiB at aa000000
  62. [ 0.000000] Memory policy: Data cache writealloc
  63. [ 0.000000] PERCPU: Embedded 8 pages/cpu @bf639000 s8256 r8192 d16320 u32768
  64. [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait rw rootfstype=ext4 uart_from_osc clk_ignore_unused cpuidle.off=1 consoleblank=0
  65. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  66. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  67. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  68. [ 0.000000] Virtual kernel memory layout:
  69. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  70. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  71. [ 0.000000] vmalloc : 0xc0800000 - 0xff000000 (1000 MB)
  72. [ 0.000000] lowmem : 0x80000000 - 0xc0000000 (1024 MB)
  73. [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
  74. [ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
  75. [ 0.000000] .text : 0x80008000 - 0x80a3ec34 (10460 kB)
  76. [ 0.000000] .init : 0x80a3f000 - 0x80a7c040 ( 245 kB)
  77. [ 0.000000] .data : 0x80a7e000 - 0x80ac4fa0 ( 284 kB)
  78. [ 0.000000] .bss : 0x80ac4fac - 0x80b25138 ( 385 kB)
  79. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  80. [ 0.000000] Preemptible hierarchical RCU implementation.
  81. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
  82. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
  83. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  84. [ 0.000000] L310 cache controller enabled
  85. [ 0.000000] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x32030000, Cache size: 256 kB
  86. [ 0.000000] Switching to timer-based delay loop
  87. [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns
  88. [ 0.000896] clocksource_of_init: no matching clocksources found
  89. [ 0.001044] Console: colour dummy device 80x30
  90. [ 0.001065] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
  91. [ 0.001079] pid_max: default: 32768 minimum: 301
  92. [ 0.001213] Security Framework initialized
  93. [ 0.001271] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  94. [ 0.001283] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  95. [ 0.007419] device-tree: Duplicate name in /soc/aips-bus@02200000/spba-bus@02200000/lcdif@02220000, renamed to "display#1"
  96. [ 0.009662] Initializing cgroup subsys devices
  97. [ 0.009679] Initializing cgroup subsys freezer
  98. [ 0.009725] CPU: Testing write buffer coherency: ok
  99. [ 0.010004] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  100. [ 0.010094] Setting up static identity map for 0x804b6620 - 0x804b6678
  101. [ 0.050366] Brought up 1 CPUs
  102. [ 0.050383] SMP: Total of 1 processors activated (6.00 BogoMIPS).
  103. [ 0.050392] CPU: All CPU(s) started in SVC mode.
  104. [ 0.050964] devtmpfs: initialized
  105. [ 0.055011] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  106. [ 0.055322] pinctrl core: initialized pinctrl subsystem
  107. [ 0.055671] regulator-dummy: no parameters
  108. [ 0.072075] NET: Registered protocol family 16
  109. [ 0.079475] DMA: preallocated 256 KiB pool for atomic coherent allocations
  110. [ 0.080136] Use WDOG1 as reset source
  111. [ 0.085407] GPIO mask to reserved irq for M4 Core = 0x00000350
  112. [ 0.086103] GPIO mask to reserved irq for M4 Core = 0x003cf000
  113. [ 0.086828] GPIO mask to reserved irq for M4 Core = 0x000c0000
  114. [ 0.088729] syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered
  115. [ 0.089046] vdd1p1: 800 <--> 1375 mV at 1100 mV
  116. [ 0.089418] vdd3p0: 2800 <--> 3150 mV at 3000 mV
  117. [ 0.089759] vdd2p5: 2100 <--> 2875 mV at 2500 mV
  118. [ 0.090120] cpu: 725 <--> 1450 mV
  119. [ 0.090547] vddpcie-phy: 725 <--> 1450 mV
  120. [ 0.090921] vddsoc: 725 <--> 1450 mV
  121. [ 0.092861] syscon 20e4000.iomuxc-gpr: regmap [mem 0x020e4000-0x020e7fff] registered
  122. [ 0.095518] syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered
  123. [ 0.095942] syscon 21ac000.romcp: regmap [mem 0x021ac000-0x021affff] registered
  124. [ 0.101195] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  125. [ 0.101208] hw-breakpoint: maximum watchpoint size is 4 bytes.
  126. [ 0.102345] imx6sx-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
  127. [ 0.103203] 20dc000.gpc supply pu not found, using dummy regulator
  128. [ 0.103971] MU is ready for cross core communication!
  129. [ 0.110265] bio: create slab <bio-0> at 0
  130. [ 0.112677] mxs-dma 1804000.dma-apbh: initialized
  131. [ 0.113380] vref-3v3: 3300 mV
  132. [ 0.113627] PSU-5V0: 5000 mV
  133. [ 0.113941] usb_otg1_vbus: 5000 mV
  134. [ 0.114285] usb_otg2_vbus: 5000 mV
  135. [ 0.114537] wlan-en-regulator: 1800 mV
  136. [ 0.115379] SCSI subsystem initialized
  137. [ 0.115667] usbphy_nop1.12 supply vcc not found, using dummy regulator
  138. [ 0.116999] i2c i2c-0: IMX I2C adapter registered
  139. [ 0.118758] i2c i2c-1: IMX I2C adapter registered
  140. [ 0.119526] i2c i2c-2: IMX I2C adapter registered
  141. [ 0.120815] i2c i2c-3: IMX I2C adapter registered
  142. [ 0.120938] Linux video capture interface: v2.00
  143. [ 0.121009] pps_core: LinuxPPS API ver. 1 registered
  144. [ 0.121018] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  145. [ 0.121040] PTP clock support registered
  146. [ 0.121602] Advanced Linux Sound Architecture Driver Initialized.
  147. [ 0.122648] Loading modules backported from Linux version v4.1.7-0-g0c5c1f1
  148. [ 0.122659] Backport integrated by backports.git v4.1.1-1-0-g8286954
  149. [ 0.122836] Switched to clocksource mxc_timer1
  150. [ 0.133325] NET: Registered protocol family 2
  151. [ 0.134187] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  152. [ 0.134273] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  153. [ 0.134401] TCP: Hash tables configured (established 8192 bind 8192)
  154. [ 0.134480] TCP: reno registered
  155. [ 0.134496] UDP hash table entries: 512 (order: 2, 16384 bytes)
  156. [ 0.134534] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  157. [ 0.134786] NET: Registered protocol family 1
  158. [ 0.135114] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  159. [ 0.136674] Bus freq driver module loaded
  160. [ 0.137453] futex hash table entries: 256 (order: 2, 16384 bytes)
  161. [ 0.144450] VFS: Disk quotas dquot_6.5.2
  162. [ 0.146558] msgmni has been set to 1988
  163. [ 0.150453] io scheduler noop registered
  164. [ 0.150466] io scheduler deadline registered
  165. [ 0.150506] io scheduler cfq registered (default)
  166. [ 0.150995] imx-weim 21b8000.weim: Driver registered.
  167. [ 0.152673] MIPI DSI driver module loaded
  168. [ 0.283671] tda19988 2-0034: Sucessfully initialised chip revision 301
  169. [ 0.294651] mxsfb 2220000.lcdif: failed to find mxc display driver
  170. [ 0.295179] DISPLAY: Power-on latency exceeded, new value 491000 ns
  171. [ 0.297082] DISPLAY: Power-off latency exceeded, new value 494000 ns
  172. [ 0.314588] Console: switching to colour frame buffer device 160x45
  173. [ 0.358646] tda19988 2-0034: Matching CEA mode is 4 for fb mode 1280x720-60
  174. [ 0.408951] DISPLAY: Power-off latency exceeded, new value 497000 ns
  175. [ 0.411571] mxsfb 2220000.lcdif: initialized
  176. [ 0.414547] imx-sdma 20ec000.sdma: no iram assigned, using external mem
  177. [ 0.414864] imx-sdma 20ec000.sdma: no event needs to be remapped
  178. [ 0.415104] imx-sdma 20ec000.sdma: loaded firmware 3.1
  179. [ 0.418068] imx-sdma 20ec000.sdma: initialized
  180. [ 0.419759] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1
  181. [ 0.420334] pfuze100-regulator 0-0008: FAB: 0, FIN: 0
  182. [ 0.420348] pfuze100-regulator 0-0008: pfuze3000 found.
  183. [ 0.421766] SW1A: 700 <--> 1475 mV at 1175 mV
  184. [ 0.423123] SW1B: 700 <--> 1475 mV at 1175 mV
  185. [ 0.423920] SW2: 1500 <--> 1850 mV at 1800 mV
  186. [ 0.424661] SW3: 900 <--> 1650 mV at 1350 mV
  187. [ 0.425412] SWBST: 5000 <--> 5150 mV at 5000 mV
  188. [ 0.426199] VSNVS: 1000 <--> 3000 mV at 3000 mV
  189. [ 0.426377] VREFDDR: 750 mV
  190. [ 0.427129] VLDO1: 1800 <--> 3300 mV at 1800 mV
  191. [ 0.427889] VLDO2: 800 <--> 1550 mV at 1500 mV
  192. [ 0.428632] VCCSD: 2850 <--> 3300 mV at 3150 mV
  193. [ 0.429399] V33: 2850 <--> 3300 mV at 3150 mV
  194. [ 0.430149] VLDO3: 1800 <--> 3300 mV at 1800 mV
  195. [ 0.431313] VLDO4: 1800 <--> 3300 mV at 1800 mV
  196. [ 0.431668] Serial: IMX driver
  197. [ 0.432016] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58, base_baud = 1500000) is a IMX
  198. [ 1.239260] console [ttymxc0] enabled
  199. [ 1.243780] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 60, base_baud = 1500000) is a IMX
  200. [ 1.253039] 22a0000.serial: ttymxc5 at MMIO 0x22a0000 (irq = 49, base_baud = 1500000) is a IMX
  201. [ 1.262015] serial: Freescale lpuart driver
  202. [ 1.267617] imx sema4 driver is registered.
  203. [ 1.272242] Install ttyMCC driver!
  204. [ 1.275753]
  205. [ 1.275753] A9 ttyMCC prepares run, MCC version is 002.000
  206. [ 1.282796] IMX MCC TTY driver module loaded
  207. [ 1.287165] [drm] Initialized drm 1.1.0 20060810
  208. [ 1.292214] [drm] Initialized vivante 1.0.0 20120216 on minor 0
  209. [ 1.302549] loop: module loaded
  210. [ 1.308692] 2188000.ethernet supply phy not found, using dummy regulator
  211. [ 1.353282] pps pps0: new PPS source ptp0
  212. [ 1.362321] libphy: fec_enet_mii_bus: probed
  213. [ 1.367345] fec 2188000.ethernet eth0: registered PHC device 0
  214. [ 1.373768] mousedev: PS/2 mouse device common for all mice
  215. [ 1.380217] input: 20cc000.snvs-pwrkey as /devices/soc0/soc.0/2000000.aips-bus/20cc000.snvs-pwrkey/input/input0
  216. [ 1.390695] snvs_pwrkey 20cc000.snvs-pwrkey: i.MX snvs powerkey probed
  217. [ 1.398103] i2c /dev entries driver
  218. [ 1.402375] IR NEC protocol handler initialized
  219. [ 1.407000] IR RC5(x) protocol handler initialized
  220. [ 1.411801] IR RC6 protocol handler initialized
  221. [ 1.416365] IR JVC protocol handler initialized
  222. [ 1.420904] IR Sony protocol handler initialized
  223. [ 1.425546] IR RC5 (streamzap) protocol handler initialized
  224. [ 1.431125] IR SANYO protocol handler initialized
  225. [ 1.435849] IR MCE Keyboard/mouse protocol handler initialized
  226. [ 1.443755] imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
  227. [ 1.452249] sdhci: Secure Digital Host Controller Interface driver
  228. [ 1.458486] sdhci: Copyright(c) Pierre Ossman
  229. [ 1.462869] sdhci-pltfm: SDHCI platform and OF driver helper
  230. [ 1.469594] mmc0: no vqmmc regulator found
  231. [ 1.473761] mmc0: no vmmc regulator found
  232. [ 1.522865] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
  233. [ 1.532629] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
  234. [ 1.546311] mmc2: no vqmmc regulator found
  235. [ 1.590228] mmc0: host does not support reading read-only switch. assuming write-enable.
  236. [ 1.605057] mmc0: new high speed SDHC card at address e624
  237. [ 1.611026] mmcblk0: mmc0:e624 SP16G 14.8 GiB
  238. [ 1.616681] mmcblk0: p1 p2
  239. [ 1.672857] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
  240. [ 1.682680] Galcore version 5.0.11.25762
  241. [ 1.696872] sdhci-esdhc-imx 2198000.usdhc: card claims to support voltages below defined range
  242. [ 1.745277] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
  243. [ 1.764115] mmc2: new high speed SDIO card at address 0001
  244. [ 1.930171] fsl-asrc 2034000.asrc: driver registered
  245. [ 1.941276] imx-tda19988 sound_hdmi.25: tda19988-codec <-> 202c000.ssi mapping ok
  246. [ 1.949999] nf_conntrack version 0.5.0 (15908 buckets, 63632 max)
  247. [ 1.956789] TCP: cubic registered
  248. [ 1.960126] NET: Registered protocol family 17
  249. [ 1.964673] Key type dns_resolver registered
  250. [ 1.969687] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
  251. [ 1.992891] failed to register cpuidle driver
  252. [ 1.997267] ThumbEE CPU extension supported.
  253. [ 2.002133] VLDO2: disabling
  254. [ 2.005536] SWBST: disabling
  255. [ 2.008434] usb_otg2_vbus: disabling
  256. [ 2.012017] usb_otg1_vbus: disabling
  257. [ 2.015765] PSU-5V0: disabling
  258. [ 2.018855] vref-3v3: disabling
  259. [ 2.022031] regulator-dummy: disabling
  260. [ 2.026722] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  261. [ 2.033916] imx_thermal tempmon.11: Extended Commercial CPU temperature grade
  262. [ 2.041070] imx_thermal tempmon.11: max:105C crit:100C passive:95C
  263. [ 2.055849] clk: Not disabling unused clocks
  264. [ 2.060146] ALSA device list:
  265. [ 2.063182] #0@B$��0�
  266. U-Boot SPL 2015.04-21123-g7271b51 (Jul 22 2016 - 14:15:22)
  267. Setting 1024MB RAM calibration data
  268. port 1
  269. SPL: u-boot second stage will be loaded from MMC0
  270.  
  271.  
  272. U-Boot 2015.04-21123-g7271b51 (Jul 22 2016 - 14:15:22)
  273.  
  274. CPU: Freescale i.MX6SX rev1.2 at 792 MHz
  275. CPU: Temperature 52 C
  276. Reset cause: POR
  277. Board: UDOO Neo Full
  278. I2C: ready
  279. DRAM: 1 GiB
  280. PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
  281. MMC: FSL_SDHC: 0, FSL_SDHC: 1
  282. *** Warning - bad CRC, using default environment
  283.  
  284. In: serial
  285. Out: serial
  286. Err: serial
  287. Net: using phy at 0
  288. FEC0 [PRIME]
  289. Normal Boot
  290. Hit any key to stop autoboot: 0
  291. switch to partitions #0, OK
  292. mmc0 is current device
  293. reading uEnv.txt
  294. 183 bytes read in 9 ms (19.5 KiB/s)
  295. Running bootscript from mmc ...
  296. Device Tree: dts-overlay/imx6sx-udoo-neo-full-hdmi-m4.dtb
  297. ## Error: "m4boot" not defined
  298. reading /zImage
  299. 4217848 bytes read in 213 ms (18.9 MiB/s)
  300. Booting from mmc ...
  301. reading dts-overlay/imx6sx-udoo-neo-full-hdmi-m4.dtb
  302. 45920 bytes read in 30 ms (1.5 MiB/s)
  303. Kernel image @ 0x80800000 [ 0x000000 - 0x405bf8 ]
  304. ## Flattened Device Tree blob at 83000000
  305. Booting using the fdt blob at 0x83000000
  306. Using Device Tree in place at 83000000, end 8300e35f
  307. Switched to ldo_bypass mode!
  308.  
  309. Starting kernel ...
  310.  
  311. [ 0.000000] Booting Linux on physical CPU 0x0
  312. [ 0.000000] Linux version 3.14.56-gacf7670-dirty (gorgo@dago) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #2 SMP PREEMPT Thu Feb 9 19:56:26 CET 2017
  313. [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
  314. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  315. [ 0.000000] Machine model: UDOO Neo Full
  316. [ 0.000000] Reserved memory: reserved region for node 'm4@0x84000000': base 0x84000000, size 8 MiB
  317. [ 0.000000] Reserved memory: reserved region for node 'm4@0xBFF00000': base 0xbff00000, size 1 MiB
  318. [ 0.000000] cma: CMA: reserved 320 MiB at aa000000
  319. [ 0.000000] Memory policy: Data cache writealloc
  320. [ 0.000000] PERCPU: Embedded 8 pages/cpu @bf639000 s8256 r8192 d16320 u32768
  321. [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait rw rootfstype=ext4 uart_from_osc clk_ignore_unused cpuidle.off=1 consoleblank=0
  322. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  323. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  324. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  325. [ 0.000000] Virtual kernel memory layout:
  326. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  327. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  328. [ 0.000000] vmalloc : 0xc0800000 - 0xff000000 (1000 MB)
  329. [ 0.000000] lowmem : 0x80000000 - 0xc0000000 (1024 MB)
  330. [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
  331. [ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
  332. [ 0.000000] .text : 0x80008000 - 0x80a3ec34 (10460 kB)
  333. [ 0.000000] .init : 0x80a3f000 - 0x80a7c040 ( 245 kB)
  334. [ 0.000000] .data : 0x80a7e000 - 0x80ac4fa0 ( 284 kB)
  335. [ 0.000000] .bss : 0x80ac4fac - 0x80b25138 ( 385 kB)
  336. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  337. [ 0.000000] Preemptible hierarchical RCU implementation.
  338. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
  339. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
  340. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  341. [ 0.000000] L310 cache controller enabled
  342. [ 0.000000] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x32030000, Cache size: 256 kB
  343. [ 0.000000] Switching to timer-based delay loop
  344. [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns
  345. [ 0.000875] clocksource_of_init: no matching clocksources found
  346. [ 0.001027] Console: colour dummy device 80x30
  347. [ 0.001048] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
  348. [ 0.001061] pid_max: default: 32768 minimum: 301
  349. [ 0.001194] Security Framework initialized
  350. [ 0.001248] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  351. [ 0.001259] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  352. [ 0.007418] device-tree: Duplicate name in /soc/aips-bus@02200000/spba-bus@02200000/lcdif@02220000, renamed to "display#1"
  353. [ 0.009667] Initializing cgroup subsys devices
  354. [ 0.009684] Initializing cgroup subsys freezer
  355. [ 0.009729] CPU: Testing write buffer coherency: ok
  356. [ 0.010012] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  357. [ 0.010102] Setting up static identity map for 0x804b6620 - 0x804b6678
  358. [ 0.050376] Brought up 1 CPUs
  359. [ 0.050391] SMP: Total of 1 processors activated (6.00 BogoMIPS).
  360. [ 0.050400] CPU: All CPU(s) started in SVC mode.
  361. [ 0.050971] devtmpfs: initialized
  362. [ 0.055027] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  363. [ 0.055336] pinctrl core: initialized pinctrl subsystem
  364. [ 0.055684] regulator-dummy: no parameters
  365. [ 0.072146] NET: Registered protocol family 16
  366. [ 0.079493] DMA: preallocated 256 KiB pool for atomic coherent allocations
  367. [ 0.080163] Use WDOG1 as reset source
  368. [ 0.085434] GPIO mask to reserved irq for M4 Core = 0x00000350
  369. [ 0.086128] GPIO mask to reserved irq for M4 Core = 0x003cf000
  370. [ 0.086845] GPIO mask to reserved irq for M4 Core = 0x000c0000
  371. [ 0.088753] syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered
  372. [ 0.089072] vdd1p1: 800 <--> 1375 mV at 1100 mV
  373. [ 0.089443] vdd3p0: 2800 <--> 3150 mV at 3000 mV
  374. [ 0.089787] vdd2p5: 2100 <--> 2875 mV at 2500 mV
  375. [ 0.090143] cpu: 725 <--> 1450 mV
  376. [ 0.090585] vddpcie-phy: 725 <--> 1450 mV
  377. [ 0.090961] vddsoc: 725 <--> 1450 mV
  378. [ 0.092905] syscon 20e4000.iomuxc-gpr: regmap [mem 0x020e4000-0x020e7fff] registered
  379. [ 0.095555] syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered
  380. [ 0.095979] syscon 21ac000.romcp: regmap [mem 0x021ac000-0x021affff] registered
  381. [ 0.101229] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  382. [ 0.101242] hw-breakpoint: maximum watchpoint size is 4 bytes.
  383. [ 0.102398] imx6sx-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
  384. [ 0.103270] 20dc000.gpc supply pu not found, using dummy regulator
  385. [ 0.104053] MU is ready for cross core communication!
  386. [ 0.110363] bio: create slab <bio-0> at 0
  387. [ 0.112798] mxs-dma 1804000.dma-apbh: initialized
  388. [ 0.113502] vref-3v3: 3300 mV
  389. [ 0.113752] PSU-5V0: 5000 mV
  390. [ 0.114058] usb_otg1_vbus: 5000 mV
  391. [ 0.114409] usb_otg2_vbus: 5000 mV
  392. [ 0.114659] wlan-en-regulator: 1800 mV
  393. [ 0.115502] SCSI subsystem initialized
  394. [ 0.115799] usbphy_nop1.12 supply vcc not found, using dummy regulator
  395. [ 0.117154] i2c i2c-0: IMX I2C adapter registered
  396. [ 0.118925] i2c i2c-1: IMX I2C adapter registered
  397. [ 0.119701] i2c i2c-2: IMX I2C adapter registered
  398. [ 0.120997] i2c i2c-3: IMX I2C adapter registered
  399. [ 0.121123] Linux video capture interface: v2.00
  400. [ 0.121195] pps_core: LinuxPPS API ver. 1 registered
  401. [ 0.121205] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  402. [ 0.121227] PTP clock support registered
  403. [ 0.121794] Advanced Linux Sound Architecture Driver Initialized.
  404. [ 0.122859] Loading modules backported from Linux version v4.1.7-0-g0c5c1f1
  405. [ 0.122870] Backport integrated by backports.git v4.1.1-1-0-g8286954
  406. [ 0.123051] Switched to clocksource mxc_timer1
  407. [ 0.133566] NET: Registered protocol family 2
  408. [ 0.134430] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  409. [ 0.134515] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  410. [ 0.134643] TCP: Hash tables configured (established 8192 bind 8192)
  411. [ 0.134721] TCP: reno registered
  412. [ 0.134740] UDP hash table entries: 512 (order: 2, 16384 bytes)
  413. [ 0.134778] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  414. [ 0.135034] NET: Registered protocol family 1
  415. [ 0.135369] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  416. [ 0.136940] Bus freq driver module loaded
  417. [ 0.137716] futex hash table entries: 256 (order: 2, 16384 bytes)
  418. [ 0.144747] VFS: Disk quotas dquot_6.5.2
  419. [ 0.146870] msgmni has been set to 1988
  420. [ 0.150757] io scheduler noop registered
  421. [ 0.150771] io scheduler deadline registered
  422. [ 0.150812] io scheduler cfq registered (default)
  423. [ 0.151305] imx-weim 21b8000.weim: Driver registered.
  424. [ 0.152996] MIPI DSI driver module loaded
  425. [ 0.283884] tda19988 2-0034: Sucessfully initialised chip revision 301
  426. [ 0.295015] mxsfb 2220000.lcdif: failed to find mxc display driver
  427. [ 0.295545] DISPLAY: Power-on latency exceeded, new value 491334 ns
  428. [ 0.297462] DISPLAY: Power-off latency exceeded, new value 499000 ns
  429. [ 0.297971] DISPLAY: Power-on latency exceeded, new value 491666 ns
  430. [ 0.314989] Console: switching to colour frame buffer device 160x45
  431. [ 0.359013] tda19988 2-0034: Matching CEA mode is 4 for fb mode 1280x720-60
  432. [ 0.411777] mxsfb 2220000.lcdif: initialized
  433. [ 0.414773] imx-sdma 20ec000.sdma: no iram assigned, using external mem
  434. [ 0.415086] imx-sdma 20ec000.sdma: no event needs to be remapped
  435. [ 0.415329] imx-sdma 20ec000.sdma: loaded firmware 3.1
  436. [ 0.418285] imx-sdma 20ec000.sdma: initialized
  437. [ 0.419989] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1
  438. [ 0.420566] pfuze100-regulator 0-0008: FAB: 0, FIN: 0
  439. [ 0.420579] pfuze100-regulator 0-0008: pfuze3000 found.
  440. [ 0.422011] SW1A: 700 <--> 1475 mV at 1175 mV
  441. [ 0.423368] SW1B: 700 <--> 1475 mV at 1175 mV
  442. [ 0.424173] SW2: 1500 <--> 1850 mV at 1800 mV
  443. [ 0.424924] SW3: 900 <--> 1650 mV at 1350 mV
  444. [ 0.425684] SWBST: 5000 <--> 5150 mV at 5000 mV
  445. [ 0.426470] VSNVS: 1000 <--> 3000 mV at 3000 mV
  446. [ 0.426652] VREFDDR: 750 mV
  447. [ 0.427392] VLDO1: 1800 <--> 3300 mV at 1800 mV
  448. [ 0.428163] VLDO2: 800 <--> 1550 mV at 1500 mV
  449. [ 0.428908] VCCSD: 2850 <--> 3300 mV at 3150 mV
  450. [ 0.429671] V33: 2850 <--> 3300 mV at 3150 mV
  451. [ 0.430416] VLDO3: 1800 <--> 3300 mV at 1800 mV
  452. [ 0.431582] VLDO4: 1800 <--> 3300 mV at 1800 mV
  453. [ 0.431940] Serial: IMX driver
  454. [ 0.432295] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58, base_baud = 1500000) is a IMX
  455. [ 1.239446] console [ttymxc0] enabled
  456. [ 1.243975] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 60, base_baud = 1500000) is a IMX
  457. [ 1.253242] 22a0000.serial: ttymxc5 at MMIO 0x22a0000 (irq = 49, base_baud = 1500000) is a IMX
  458. [ 1.262221] serial: Freescale lpuart driver
  459. [ 1.267822] imx sema4 driver is registered.
  460. [ 1.272448] Install ttyMCC driver!
  461. [ 1.275956]
  462. [ 1.275956] A9 ttyMCC prepares run, MCC version is 002.000
  463. [ 1.283003] IMX MCC TTY driver module loaded
  464. [ 1.287371] [drm] Initialized drm 1.1.0 20060810
  465. [ 1.292427] [drm] Initialized vivante 1.0.0 20120216 on minor 0
  466. [ 1.302791] loop: module loaded
  467. [ 1.308938] 2188000.ethernet supply phy not found, using dummy regulator
  468. [ 1.353498] pps pps0: new PPS source ptp0
  469. [ 1.362485] libphy: fec_enet_mii_bus: probed
  470. [ 1.367505] fec 2188000.ethernet eth0: registered PHC device 0
  471. [ 1.373942] mousedev: PS/2 mouse device common for all mice
  472. [ 1.380396] input: 20cc000.snvs-pwrkey as /devices/soc0/soc.0/2000000.aips-bus/20cc000.snvs-pwrkey/input/input0
  473. [ 1.390869] snvs_pwrkey 20cc000.snvs-pwrkey: i.MX snvs powerkey probed
  474. [ 1.398290] i2c /dev entries driver
  475. [ 1.402571] IR NEC protocol handler initialized
  476. [ 1.407194] IR RC5(x) protocol handler initialized
  477. [ 1.411997] IR RC6 protocol handler initialized
  478. [ 1.416560] IR JVC protocol handler initialized
  479. [ 1.421098] IR Sony protocol handler initialized
  480. [ 1.425742] IR RC5 (streamzap) protocol handler initialized
  481. [ 1.431320] IR SANYO protocol handler initialized
  482. [ 1.436046] IR MCE Keyboard/mouse protocol handler initialized
  483. [ 1.443978] imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
  484. [ 1.452471] sdhci: Secure Digital Host Controller Interface driver
  485. [ 1.458709] sdhci: Copyright(c) Pierre Ossman
  486. [ 1.463096] sdhci-pltfm: SDHCI platform and OF driver helper
  487. [ 1.469831] mmc0: no vqmmc regulator found
  488. [ 1.473999] mmc0: no vmmc regulator found
  489. [ 1.523082] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
  490. [ 1.532853] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
  491. [ 1.546533] mmc2: no vqmmc regulator found
  492. [ 1.590685] mmc0: host does not support reading read-only switch. assuming write-enable.
  493. [ 1.605535] mmc0: new high speed SDHC card at address e624
  494. [ 1.611513] mmcblk0: mmc0:e624 SP16G 14.8 GiB
  495. [ 1.617171] mmcblk0: p1 p2
  496. [ 1.673071] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
  497. [ 1.682901] Galcore version 5.0.11.25762
  498. [ 1.697092] sdhci-esdhc-imx 2198000.usdhc: card claims to support voltages below defined range
  499. [ 1.745484] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
  500. [ 1.764338] mmc2: new high speed SDIO card at address 0001
  501. [ 1.932229] fsl-asrc 2034000.asrc: driver registered
  502. [ 1.943439] imx-tda19988 sound_hdmi.25: tda19988-codec <-> 202c000.ssi mapping ok
  503. [ 1.952082] nf_conntrack version 0.5.0 (15908 buckets, 63632 max)
  504. [ 1.958874] TCP: cubic registered
  505. [ 1.962212] NET: Registered protocol family 17
  506. [ 1.966762] Key type dns_resolver registered
  507. [ 1.971790] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
  508. [ 1.993102] failed to register cpuidle driver
  509. [ 1.997480] ThumbEE CPU extension supported.
  510. [ 2.002331] VLDO2: disabling
  511. [ 2.005736] SWBST: disabling
  512. [ 2.008631] usb_otg2_vbus: disabling
  513. [ 2.012213] usb_otg1_vbus: disabling
  514. [ 2.015962] PSU-5V0: disabling
  515. [ 2.019053] vref-3v3: disabling
  516. [ 2.022230] regulator-dummy: disabling
  517. [ 2.026922] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  518. [ 2.034127] imx_thermal tempmon.11: Extended Commercial CPU temperature grade
  519. [ 2.041281] imx_thermal tempmon.11: max:105C crit:100C passive:95C
  520. [ 2.056109] clk: Not disabling unused clocks
  521. [ 2.060403] ALSA device list:
  522. [ 2.063442] #0: imx-audio-tda19988
  523. [ 2.337258] EXT4-fs (mmcblk0p2): 3 orphan inodes deleted
  524. [ 2.342638] EXT4-fs (mmcblk0p2): recovery complete
  525. [ 2.368944] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  526. [ 2.377176] VFS: Mounted root (ext4 filesystem) on device 179:2.
  527. [ 2.384292] devtmpfs: mounted
  528. [ 2.387754] Freeing unused kernel memory: 244K (80a3f000 - 80a7c000)
  529. [ 2.829800] random: init urandom read with 43 bits of entropy available
  530. [ 3.243209] init: mounted-proc main process (99) terminated with status 1
  531. [ 5.465435] tsl2563 1-0029: detect error 5
  532. [ 5.853120] (stk) :ldisc installation timeout
  533. [ 6.853135] (stk) : timed out waiting for ldisc to be un-installed
  534. [ OK ]ting up X socket directories...
  535. [ OK ]ding cpufreq kernel modules...
  536. [ OK ]Freq Utilities: Setting ondemand CPUFreq governor... * CPU0...
  537. [ OK ]ting sysfs variables...
  538. [ OK ]rting NTP server ntpd
  539. Sun Jan 1 00:00:00 UTC 2017
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!