centos telnet 3000

[-bash:~]$ telnet localhost 3000
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
dracut: Switching root
		Welcome to CentOS Linux
Starting udev: udev: starting version 147
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
ne2k-pci 0000:00:03.0: can't find IRQ for PCI INT A; probably buggy MP table
eth0: RealTek RTL-8029 found at 0xc100, IRQ 11, 52:54:00:12:34:56.
[  OK  ]
Setting hostname centos:  [  OK  ]
Setting up Logical Volume Management:   No volume groups found
[  OK  ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/sda1
/dev/sda1: clean, 19935/96000 files, 167163/384000 blocks
[  OK  ]
Remounting root filesystem in read-write mode:  [  OK  ]
Mounting local filesystems:  [  OK  ]

*** Warning -- SELinux targeted policy relabel is required.
*** Relabeling could take a very long time, depending on file
*** system size and speed of hard drives.
semodule invoked oom-killer: gfp_mask=0x280da, order=0, oom_adj=0
semodule cpuset=/ mems_allowed=0
Pid: 580, comm: semodule Not tainted 2.6.32-71.29.1.el6.i686 #1
Call Trace:
 [<c04d8630>] ? oom_kill_process+0xb0/0x2d0
 [<c04d8cda>] ? __out_of_memory+0x4a/0x90
 [<c04d8d75>] ? out_of_memory+0x55/0xb0
 [<c04e65e2>] ? __alloc_pages_nodemask+0x7a2/0x7c0
 [<c04fa56f>] ? handle_pte_fault+0xa5f/0xdb0
 [<c0443dc7>] ? update_curr+0x167/0x2c0
 [<c04fa9f2>] ? handle_mm_fault+0x132/0x1d0
 [<c0810370>] ? do_page_fault+0x0/0x480
 [<c08104a4>] ? do_page_fault+0x134/0x480
 [<c04b0a71>] ? move_native_irq+0x11/0x50
 [<c04574f5>] ? irq_exit+0x35/0x70
 [<c040b7d0>] ? do_IRQ+0x50/0xc0
 [<c051ed81>] ? sys_read+0x41/0x70
 [<c0810370>] ? do_page_fault+0x0/0x480
 [<c080e44b>] ? error_code+0x73/0x78
Mem-Info:
DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
Normal per-cpu:
CPU    0: hi:   42, btch:   7 usd:  11
active_anon:10905 inactive_anon:10269 isolated_anon:0
 active_file:0 inactive_file:43 isolated_file:0
 unevictable:0 dirty:1 writeback:0 unstable:0
 free:467 slab_reclaimable:924 slab_unreclaimable:6607
 mapped:9 shmem:35 pagetables:113 bounce:0
DMA free:616kB min:172kB low:212kB high:256kB active_anon:5124kB inactive_anon:2572kB active_file:0kB inactive_file:56kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15864kB mlocked:0kB dirty:8kB writeback:0kB mapped:0kB shmem:12kB slab_reclaimable:24kB slab_unreclaimable:8kB kernel_stack:8kB pagetables:8kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:94 all_unreclaimable? yes
lowmem_reserve[]: 0 111 111 111
Normal free:1252kB min:1260kB low:1572kB high:1888kB active_anon:38496kB inactive_anon:38504kB active_file:0kB inactive_file:116kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:113728kB mlocked:0kB dirty:0kB writeback:0kB mapped:36kB shmem:128kB slab_reclaimable:3672kB slab_unreclaimable:26420kB kernel_stack:328kB pagetables:444kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:223 all_unreclaimable? yes
lowmem_reserve[]: 0 0 0 0
DMA: 2*4kB 0*8kB 0*16kB 1*32kB 1*64kB 0*128kB 0*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 616kB
Normal: 313*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 1252kB
84 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap  = 0kB
Total swap = 0kB
32751 pages RAM
0 pages HighMem
3079 pages reserved
164 pages shared
27956 pages non-shared
Out of memory: kill process 580 (semodule) score 1355 or a child
Killed process 580 (semodule) vsz:86776kB, anon-rss:82832kB, file-rss:40kB
**************************
Unmounting file systems
Automatic reboot in progress.
md: stopping all md devices.
Restarting system.
machine restart
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-71.29.1.el6.i686 ([email protected]) (gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) ) #1 SMP Mon Jun 27 18:07:00 BST 2011
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
 BIOS-e820: 0000000007ff0000 - 0000000008000000 (ACPI data)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x7ff0 max_arch_pfn = 0x400000
init_memory_mapping: 0000000000000000-0000000007ff0000
Using x86 segment limits to approximate NX protection
RAMDISK: 06eeb000 - 07fdfc05
ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219)
0MB HIGHMEM available.
127MB LOWMEM available.
  mapped low ram: 0 - 07ff0000
  low ram: 0 - 07ff0000
  node 0 low ram: 00000000 - 07ff0000
  node 0 bootmap 00002000 - 00003000
(9 early reservations) ==> bootmem [0000000000 - 0007ff0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000400000 - 0000bd38a4]    TEXT DATA BSS ==> [0000400000 - 0000bd38a4]
  #4 [0006eeb000 - 0007fdfc05]          RAMDISK ==> [0006eeb000 - 0007fdfc05]
  #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #6 [0000bd4000 - 0000bdc03d]              BRK ==> [0000bd4000 - 0000bdc03d]
  #7 [0000007000 - 000000b000]          PGTABLE ==> [0000007000 - 000000b000]
  #8 [0000002000 - 0000003000]          BOOTMAP ==> [0000002000 - 0000003000]
found SMP MP-table at [c00fbad0] fbad0
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  Normal   0x00001000 -> 0x00007ff0
  HighMem  0x00007ff0 -> 0x00007ff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000001 -> 0x0000009f
    0: 0x00000100 -> 0x00007ff0
Using APIC driver default
SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
MPTABLE: OEM ID: QEMUCPU
MPTABLE: Product ID: 0.1
MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
I/O APIC #1 Version 17 at 0xFEC00000.
Processors: 1
SMP: Allowing 1 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
Allocating PCI resources starting at 8000000 (gap: 8000000:f7fc0000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 15 pages/cpu @c1600000 s38360 r0 d23080 u2097152
pcpu-alloc: s38360 r0 d23080 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32398
Kernel command line: ro root=UUID=981548cf-48a3-42a9-a775-ecbf2b266380 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us  rhgb console=ttyS0,9600n8
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 100628k/131008k available (4171k kernel code, 29832k reserved, 2225k data, 524k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xffad5000 - 0xfffff000   (5288 kB)
    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
    vmalloc : 0xc87f0000 - 0xff5fe000   ( 878 MB)
    lowmem  : 0xc0000000 - 0xc7ff0000   ( 127 MB)
      .init : 0xc0a40000 - 0xc0ac3000   ( 524 kB)
      .data : 0xc0812c46 - 0xc0a3f0a8   (2225 kB)
      .text : 0xc0400000 - 0xc0812c46   (4171 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:256
Console: colour VGA+ 80x25
console [ttyS0] enabled
allocated 2621440 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 2387.530 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4775.06 BogoMIPS (lpj=2387530)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Performance Events: p6 PMU driver.
... version:                0
... bit width:              32
... generic registers:      2
... value mask:             00000000ffffffff
... max period:             000000007fffffff
... fixed-purpose events:   0
... event mask:             0000000000000003
Checking 'hlt' instruction... OK.
alternatives: switching to unfair spinlock
SMP alternatives: switching to UP code
Freeing SMP alternatives: 15k freed
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel Pentium II (Klamath) stepping 03
APIC timer disabled due to verification failure
Brought up 1 CPUs
Total of 1 processors activated (4775.06 BogoMIPS).
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb430, last bus=0
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter disabled.
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:01.0: PIIX/ICH IRQ router [8086:7000]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
Switching to clocksource tsc
pnp: PnP ACPI: disabled
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17363k freed
platform rtc_cmos: registered platform RTC device (no PNP device found)
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
type=2000 audit(1319938179.505:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 230
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 5779EE90EFB2B511
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.0
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
erial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
rtc_cmos rtc_cmos: setting system clock to 2011-10-30 01:29:41 UTC (1319938181)
Initalizing network drop monitor service
Freeing unused kernel memory: 524k freed
Write protecting the kernel text: 4172k
Write protecting the kernel read-only data: 1792k
Clocksource tsc unstable (delta = -102570541 ns)
Switching to clocksource pit
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
dracut: dracut-004-33.2.el6_0
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
udev: starting version 147
dracut: Starting plymouth daemon
could not read byte from child: Success
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
ata2.00: ATAPI: QEMU DVD-ROM, 0.11.0, max UDMA/100
ata1.00: ATA-7: QEMU HARDDISK, 0.11.0, max UDMA/100
ata1.00: 4096000 sectors, multi 16: LBA48
ata2.00: configured for MWDMA2
ata1.00: configured for MWDMA2
scsi 0:0:0:0: Direct-Access     ATA      QEMU HARDDISK    0.11 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     0.11 PQ: 0 ANSI: 5
virtio-pci 0000:00:04.0: can't find IRQ for PCI INT A; probably buggy MP table
sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
Uniform CD-ROM driver Revision: 3.20
sd 0:0:0:0: [sda] 4096000 512-byte logical blocks: (2.09 GB/1.95 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/sda1
dracut: Loading SELinux policy
type=1404 audit(1319938190.637:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
type=1403 audit(1319938192.952:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
		Welcome to CentOS Linux
Starting udev: udev: starting version 147
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
ne2k-pci 0000:00:03.0: can't find IRQ for PCI INT A; probably buggy MP table
eth0: RealTek RTL-8029 found at 0xc100, IRQ 11, 52:54:00:12:34:56.
[  OK  ]
Setting hostname centos:  [  OK  ]
Setting up Logical Volume Management:   No volume groups found
[  OK  ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/sda1
/dev/sda1: clean, 20170/96000 files, 169517/384000 blocks
[  OK  ]
Remounting root filesystem in read-write mode:  [  OK  ]
Mounting local filesystems:  [  OK  ]
Enabling /etc/fstab swaps:  Adding 510968k swap on /dev/sda2.  Priority:-1 extents:1 across:510968k
[  OK  ]
Entering non-interactive startup
ip6tables: Applying firewall rules: NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (1854 buckets, 7416 max)
[  OK  ]
iptables: Applying firewall rules: ip_tables: (C) 2000-2006 Netfilter Core Team
[  OK  ]
Bringing up loopback interface:  [  OK  ]
Starting auditd: [  OK  ]
Starting system logger: [  OK  ]
Starting rpcbind: [  OK  ]
Starting NFS statd: [  OK  ]
Starting RPC idmapd: RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
[  OK  ]
Starting FCoE initiator service: 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
[  OK  ]

Mounting other filesystems:  [  OK  ]
Retrigger failed udev events[  OK  ]
Starting sshd: [  OK  ]