Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.3.0-rc2-next-20150923-00016-gab64079 (marcus@coopshtpc) (gcc version 4.9.2 (GCC) ) #174 SMP Wed Sep 23 18:38:33 CEST 2015
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine model: Mele A1000
- [ 0.000000] Memory policy: Data cache writeback
- [ 0.000000] CPU: All CPU(s) started in SVC mode.
- [ 0.000000] PERCPU: Embedded 12 pages/cpu @df8d8000 s17536 r8192 d23424 u49152
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129286
- [ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk=serial,uart0,115200 root=/dev/nfs nfsroot=192.168.0.3:/tftpboot/rootfs/ ip=192.168.0.136:192.168.0.3:192.168.0.1:255.255.255.0::eth0
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 508436K/521216K available (5563K kernel code, 288K rwdata, 1652K rodata, 300K init, 275K bss, 12780K reserved, 0K cma-reserved, 0K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- [ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xdfd00000 ( 509 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc07140a8 (7217 kB)
- [ 0.000000] .init : 0xc0715000 - 0xc0760000 ( 300 kB)
- [ 0.000000] .data : 0xc0760000 - 0xc07a8040 ( 289 kB)
- [ 0.000000] .bss : 0xc07ab000 - 0xc07efff0 ( 276 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 32.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000021] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
- [ 0.000046] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
- [ 0.000304] Console: colour dummy device 80x30
- [ 0.000330] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
- [ 0.090091] pid_max: default: 32768 minimum: 301
- [ 0.090202] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.090211] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.090805] CPU: Testing write buffer coherency: ok
- [ 0.091079] CPU0: thread -1, cpu 0, socket -1, mpidr 0
- [ 0.091152] Setting up static identity map for 0x40008280 - 0x400082d8
- [ 0.093104] Brought up 1 CPUs
- [ 0.093122] SMP: Total of 1 processors activated (1001.88 BogoMIPS).
- [ 0.093130] CPU: All CPU(s) started in SVC mode.
- [ 0.094516] devtmpfs: initialized
- [ 0.101428] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- [ 0.101771] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.102130] pinctrl core: initialized pinctrl subsystem
- [ 0.103159] NET: Registered protocol family 16
- [ 0.103711] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.109761] hw-breakpoint: debug architecture 0x4 unsupported.
- [ 0.122124] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
- [ 0.122203] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
- [ 0.123172] reg-fixed-voltage emac-3v3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/emac_power_pin@0, deferring probe
- [ 0.123654] SCSI subsystem initialized
- [ 0.124223] usbcore: registered new interface driver usbfs
- [ 0.124298] usbcore: registered new interface driver hub
- [ 0.124363] usbcore: registered new device driver usb
- [ 0.124593] pps_core: LinuxPPS API ver. 1 registered
- [ 0.124599] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.124633] PTP clock support registered
- [ 0.124936] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.126570] clocksource: Switched to clocksource timer
- [ 0.127611] simple-framebuffer 5fd00000.framebuffer: framebuffer at 0x5fd00000, 0x300000 bytes, mapped to 0xe0100000
- [ 0.127624] simple-framebuffer 5fd00000.framebuffer: format=x8r8g8b8, mode=1024x768x32, linelength=4096
- [ 0.139846] Console: switching to colour frame buffer device 128x48
- [ 0.151211] simple-framebuffer 5fd00000.framebuffer: fb0: simplefb registered!
- [ 0.162352] NET: Registered protocol family 2
- [ 0.162859] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.162909] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.162968] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.163036] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.163056] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.163206] NET: Registered protocol family 1
- [ 0.163551] RPC: Registered named UNIX socket transport module.
- [ 0.163562] RPC: Registered udp transport module.
- [ 0.163568] RPC: Registered tcp transport module.
- [ 0.163574] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.165186] futex hash table entries: 256 (order: 2, 16384 bytes)
- [ 0.175933] NFS: Registering the id_resolver key type
- [ 0.175999] Key type id_resolver registered
- [ 0.176007] Key type id_legacy registered
- [ 0.180053] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
- [ 0.180070] io scheduler noop registered
- [ 0.180082] io scheduler deadline registered
- [ 0.180116] io scheduler cfq registered (default)
- [ 0.182821] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
- [ 0.261640] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
- [ 0.265075] console [ttyS0] disabled
- [ 0.285186] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 31, base_baud = 1500000) is a U6_16550A
- [ 0.860576] console [ttyS0] enabled
- [ 0.926612] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
- [ 0.934132] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled
- [ 0.941321] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
- [ 0.950293] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc
- [ 0.959907] scsi host0: ahci-sunxi
- [ 0.963677] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 23
- [ 0.972328] CAN device driver interface
- [ 0.978744] sun4i-emac 1c0b000.ethernet: eth0: at e00b8000, IRQ 18 MAC: 12:34:56:78:99:aa
- [ 0.987464] usbcore: registered new interface driver asix
- [ 0.992925] usbcore: registered new interface driver ax88179_178a
- [ 0.999105] usbcore: registered new interface driver cdc_ether
- [ 1.004984] usbcore: registered new interface driver net1080
- [ 1.010720] usbcore: registered new interface driver cdc_subset
- [ 1.016706] usbcore: registered new interface driver zaurus
- [ 1.022326] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
- [ 1.029837] usbcore: registered new interface driver cdc_ncm
- [ 1.035493] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.042048] ehci-platform: EHCI generic platform driver
- [ 1.047725] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.053913] ohci-platform: OHCI generic platform driver
- [ 1.061051] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
- [ 1.067892] sunxi-rtc 1c20d00.rtc: RTC enabled
- [ 1.072448] i2c /dev entries driver
- [ 1.077087] axp20x 0-0034: AXP20x variant AXP209 found
- [ 1.089705] input: axp20x-pek as /devices/platform/soc@01c00000/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0
- [ 1.100156] axp20x-regulator axp20x-regulator: regulators node not found
- [ 1.109614] axp20x 0-0034: AXP20X driver loaded
- [ 1.114965] lirc_dev: IR Remote Control driver registered, major 249
- [ 1.121452] IR NEC protocol handler initialized
- [ 1.125982] IR RC5(x/sz) protocol handler initialized
- [ 1.131046] IR RC6 protocol handler initialized
- [ 1.135575] IR JVC protocol handler initialized
- [ 1.140141] IR Sony protocol handler initialized
- [ 1.144757] IR SANYO protocol handler initialized
- [ 1.149477] IR Sharp protocol handler initialized
- [ 1.154180] IR MCE Keyboard/mouse protocol handler initialized
- [ 1.160023] IR LIRC bridge handler initialized
- [ 1.164466] IR XMP protocol handler initialized
- [ 1.169336] Registered IR keymap rc-empty
- [ 1.173717] input: sunxi-ir as /devices/platform/soc@01c00000/1c21800.ir/rc/rc0/input1
- [ 1.181677] rc0: sunxi-ir as /devices/platform/soc@01c00000/1c21800.ir/rc/rc0
- [ 1.189243] input: MCE IR Keyboard/Mouse (sunxi-ir) as /devices/virtual/input/input2
- [ 1.197252] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-ir) registered at minor = 0
- [ 1.205158] sunxi-ir 1c21800.ir: initialized sunXi IR driver
- [ 1.211509] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
- [ 1.220085] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
- [ 1.226007] sunxi-mmc 1c0f000.mmc: Got CD GPIO
- [ 1.266740] sunxi-mmc 1c0f000.mmc: base:0xe00c4000 irq:19
- [ 1.273157] sun4i-ss 1c15000.crypto-engine: no reset control found
- [ 1.279481] sun4i-ss 1c15000.crypto-engine: Die ID 7
- [ 1.286214] usbcore: registered new interface driver usbhid
- [ 1.291844] usbhid: USB HID core driver
- [ 1.295768] usbcore: registered new interface driver rtl8723au
- [ 1.303395] NET: Registered protocol family 17
- [ 1.307918] can: controller area network core (rev 20120528 abi 9)
- [ 1.314175] NET: Registered protocol family 29
- [ 1.318653] can: raw protocol (rev 20120528)
- [ 1.322924] can: broadcast manager protocol (rev 20120528 t)
- [ 1.328607] can: netlink gateway (rev 20130117) max_hops=1
- [ 1.334404] Key type dns_resolver registered
- [ 1.339823] Registering SWP/SWPB emulation handler
- [ 1.351745] libphy: sun4i_mii_bus: probed
- [ 1.383894] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 1.392312] ehci-platform 1c14000.usb: EHCI Host Controller
- [ 1.397968] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
- [ 1.405862] ehci-platform 1c14000.usb: irq 20, io mem 0x01c14000
- [ 1.412051] ata1: SATA link down (SStatus 0 SControl 300)
- [ 1.417574] mmc0: new high speed SDHC card at address 1234
- [ 1.423659] mmcblk0: mmc0:1234 SA16G 14.6 GiB
- [ 1.428784] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
- [ 1.435072] mmcblk0: p1 p2 p3
- [ 1.440164] hub 1-0:1.0: USB hub found
- [ 1.443964] hub 1-0:1.0: 1 port detected
- [ 1.448812] ehci-platform 1c1c000.usb: EHCI Host Controller
- [ 1.454406] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
- [ 1.462372] ehci-platform 1c1c000.usb: irq 24, io mem 0x01c1c000
- [ 1.486576] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
- [ 1.493716] hub 2-0:1.0: USB hub found
- [ 1.497564] hub 2-0:1.0: 1 port detected
- [ 1.502325] ohci-platform 1c14400.usb: Generic Platform OHCI controller
- [ 1.509016] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
- [ 1.516910] ohci-platform 1c14400.usb: irq 21, io mem 0x01c14400
- [ 1.581535] hub 3-0:1.0: USB hub found
- [ 1.585317] hub 3-0:1.0: 1 port detected
- [ 1.590097] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
- [ 1.596789] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
- [ 1.604653] ohci-platform 1c1c400.usb: irq 25, io mem 0x01c1c400
- [ 1.671488] hub 4-0:1.0: USB hub found
- [ 1.675272] hub 4-0:1.0: 1 port detected
- [ 1.679879] sunxi-rtc 1c20d00.rtc: setting system clock to 2010-01-01 01:33:20 UTC (1262309600)
- [ 1.694750] sun4i-emac 1c0b000.ethernet eth0: could not find the PHY
- [ 1.701216] sun4i-emac 1c0b000.ethernet eth0: cannot probe MDIO bus
- [ 1.707514] IP-Config: Failed to open eth0
- [ 1.711607] IP-Config: Device `eth0' not found
- [ 1.716071] vcc3v0: disabling
- [ 1.719060] vcc5v0: disabling
- [ 1.722158] ALSA device list:
- [ 1.725122] No soundcards found.
- [ 1.786657] usb 1-1: new high-speed USB device number 2 using ehci-platform
- [ 1.846584] usb 2-1: new high-speed USB device number 2 using ehci-platform
- [ 1.939314] hub 1-1:1.0: USB hub found
- [ 1.943431] hub 1-1:1.0: 4 ports detected
- [ 96.777725] VFS: Unable to mount root fs via NFS, trying floppy.
- [ 96.784141] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
- [ 96.792400] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.3.0-rc2-next-20150923-00016-gab64079 #174
- [ 96.801257] Hardware name: Allwinner A1X (Device Tree)
- [ 96.806425] [<c0017040>] (unwind_backtrace) from [<c0013d50>] (show_stack+0x10/0x14)
- [ 96.814166] [<c0013d50>] (show_stack) from [<c021a86c>] (dump_stack+0x88/0x98)
- [ 96.821392] [<c021a86c>] (dump_stack) from [<c00a2dd0>] (panic+0x9c/0x1f8)
- [ 96.828271] [<c00a2dd0>] (panic) from [<c07161b8>] (mount_block_root+0x194/0x230)
- [ 96.835749] [<c07161b8>] (mount_block_root) from [<c0716370>] (mount_root+0x11c/0x124)
- [ 96.843658] [<c0716370>] (mount_root) from [<c07164d0>] (prepare_namespace+0x158/0x1a0)
- [ 96.851655] [<c07164d0>] (prepare_namespace) from [<c0715e80>] (kernel_init_freeable+0x1e4/0x1f4)
- [ 96.860526] [<c0715e80>] (kernel_init_freeable) from [<c05469e4>] (kernel_init+0x8/0xe8)
- [ 96.868611] [<c05469e4>] (kernel_init) from [<c0010178>] (ret_from_fork+0x14/0x3c)
- [ 96.876174] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
- [ 121.346577] random: nonblocking pool is initialized
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement