Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@DD-WRT:~# nvram lock, waiting....
- dmesg
- Booting Linux on physical CPU 0x0
- Linux version 3.10.19-rc1 (root@dd-wrt.buildserver) (gcc version 4.8.2 (OpenWrt/Linaro GCC 4.8-2013.10 r38451) ) #407 Sat Nov 9 20:11:46 CET 2013
- CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d
- CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- Machine: Northstar Prototype
- Ignoring unrecognised tag 0x00000000
- Memory policy: ECC disabled, Data cache writeback
- map io
- MPCORE found at 19020000 (VIRT d9020000) 18000000 d8000000
- On node 0 totalpages: 65536
- free_area_init_node: node 0, pgdat c03b7a30, node_mem_map c043d000
- Normal zone: 256 pages used for memmap
- Normal zone: 0 pages reserved
- Normal zone: 32768 pages, LIFO batch:7
- HighMem zone: 4352 pages used for memmap
- HighMem zone: 32768 pages, LIFO batch:7
- pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- pcpu-alloc: [0] 0
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65280
- Kernel command line: console=ttyS0,115200 panic=10 root=/dev/mtdblock3 rootfstype=squashfs,jffs2 noinitrd init=/bin/sh
- PID hash table entries: 512 (order: -1, 2048 bytes)
- Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- Memory: 128MB 128MB = 256MB total
- Memory: 255572k/255572k available, 6572k reserved, 131072K highmem
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
- lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
- pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- .text : 0xc0008000 - 0xc0376d84 (3516 kB)
- .init : 0xc0377000 - 0xc03a63d8 ( 189 kB)
- .data : 0xc03a8000 - 0xc03df660 ( 222 kB)
- .bss : 0xc03df660 - 0xc043c53c ( 372 kB)
- NR_IRQS:256
- MPCORE GIC init
- External imprecise Data abort at addr=0x0, fsr=0x1c06 ignored.
- MPCORE Global Timer Clock 400000000Hz on IRQ 27
- sched_clock: 32 bits at 400MHz, resolution 2ns, wraps every 10737ms
- Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 512
- CPU: Testing write buffer coherency: ok
- Setting up static identity map for 0xc0011a40 - 0xc0011a74
- L310: cache controller enabled 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x7a130000
- NET: Registered protocol family 16
- DMA: preallocated 256 KiB pool for atomic coherent allocations
- Found a Esmt NAND flash:
- Total size: 128MB
- Block size: 128KB
- Page Size: 2048B
- OOB Size: 64B
- Sector size: 512B
- Spare size: 16B
- ECC level: 8-bit
- Device ID: 0x92 0xf1 0x80 0x95 0x40
- found nand nvram at A0000
- CCA UART Clock Config: Sel=1 Ovr=1 Div=48
- CCA UART Clock rate 100000000Hz
- bio: create slab <bio-0> at 0
- vgaarb: loaded
- Switching to clocksource mpcore_gtimer
- NET: Registered protocol family 2
- TCP established hash table entries: 1024 (order: 1, 8192 bytes)
- TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
- TCP: Hash tables configured (established 1024 bind 1024)
- TCP: reno registered
- UDP hash table entries: 256 (order: 0, 4096 bytes)
- UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- NET: Registered protocol family 1
- PCI: CLS 0 bytes, default 64
- init gpio code
- Buffalo WZR-600DHP2
- PCI: no core
- PCI: no core
- PCI: scanning bus 0
- PCI host bridge to bus 0000:00
- pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
- pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
- pci_bus 0000:00: root bus resource [bus 00-ff]
- pci 0000:00:00.0: [14e4:0800] type 00 class 0x050100
- pci 0000:00:00.0: reg 10: [mem 0x18000000-0x18000fff]
- pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:01.0: [14e4:050b] type 00 class 0xffffff
- pci 0000:00:01.0: reg 10: [mem 0x18001000-0x18001fff]
- pci 0000:00:01.0: reg 14: [mem 0x18002000-0x18002fff]
- pci 0000:00:01.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:02.0: [14e4:0502] type 00 class 0xffffff
- pci 0000:00:02.0: reg 10: [mem 0x1802c000-0x1802cfff]
- pci 0000:00:02.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:03.0: [14e4:4715] type 00 class 0x020000
- pci 0000:00:03.0: reg 10: [mem 0x18024000-0x18024fff]
- pci 0000:00:03.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:04.0: [14e4:4715] type 00 class 0x020000
- pci 0000:00:04.0: reg 10: [mem 0x18025000-0x18025fff]
- pci 0000:00:04.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:05.0: [14e4:4715] type 00 class 0x020000
- pci 0000:00:05.0: reg 10: [mem 0x18026000-0x18026fff]
- pci 0000:00:05.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:06.0: [14e4:4715] type 00 class 0x020000
- pci 0000:00:06.0: reg 10: [mem 0x18027000-0x18027fff]
- pci 0000:00:06.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:07.0: [14e4:0501] type 00 class 0xffffff
- pci 0000:00:07.0: reg 10: [mem 0x18012000-0x18012fff]
- pci 0000:00:07.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:08.0: [14e4:0501] type 00 class 0xffffff
- pci 0000:00:08.0: reg 10: [mem 0x18013000-0x18013fff]
- pci 0000:00:08.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:09.0: [14e4:0510] type 00 class 0xffffff
- pci 0000:00:09.0: reg 10: [mem 0x1800b000-0x1800bfff]
- pci 0000:00:09.0: reg 14: [mem 0x1800c000-0x1800cfff]
- pci 0000:00:09.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:0a.0: [14e4:471a] type 00 class 0x0c0310
- pci 0000:00:0a.0: reg 10: [mem 0x18022000-0x18022fff]
- pci 0000:00:0a.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:0a.1: [14e4:471a] type 00 class 0x0c0320
- pci 0000:00:0a.1: reg 10: [mem 0x18021000-0x18021fff]
- pci 0000:00:0a.1: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:0b.0: [14e4:472a] type 00 class 0x0c0330
- pci 0000:00:0b.0: reg 10: [mem 0x18023000-0x18023fff]
- pci 0000:00:0b.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:0c.0: [14e4:0503] type 00 class 0xffffff
- pci 0000:00:0c.0: reg 10: [mem 0x18020000-0x18020fff]
- pci 0000:00:0c.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:0d.0: [14e4:0506] type 00 class 0xffffff
- pci 0000:00:0d.0: reg 10: [mem 0x18210000-0x1821ffff]
- pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:0e.0: [14e4:0507] type 00 class 0xffffff
- pci 0000:00:0e.0: reg 10: [mem 0x18010000-0x18010fff]
- pci 0000:00:0e.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:0f.0: [14e4:0508] type 00 class 0xffffff
- pci 0000:00:0f.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:10.0: [14e4:0509] type 00 class 0xffffff
- pci 0000:00:10.0: reg 10: [mem 0x18028000-0x18028fff]
- pci 0000:00:10.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:11.0: [14e4:050a] type 00 class 0xffffff
- pci 0000:00:11.0: reg 10: [mem 0x18029000-0x18029fff]
- pci 0000:00:11.0: reg 30: [mem 0x00000000-0x000007ff pref]
- PCI: Fixing up bus 0
- PCIE1 link=1
- PCIE1 switching to GEN2
- PCIE1 link=1
- PCI host bridge to bus 0001:00
- pci_bus 0001:00: root bus resource [mem 0x08000000-0x0fffffff]
- pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
- pci 0001:00:00.0: [14e4:8011] type 01 class 0x060400
- pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
- PCI: Fixing up bus 0
- PCI: bus0: Fast back to back transfers disabled
- pci 0001:01:00.0: [14e4:a8dc] type 00 class 0x028000
- pci 0001:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
- pci 0001:01:00.0: supports D1 D2
- PCI: Fixing up bus 1
- PCI: bus1: Fast back to back transfers disabled
- pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
- pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
- pci 0001:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
- pci 0001:01:00.0: BAR 0: assigned [mem 0x08000000-0x08003fff 64bit]
- pci 0001:00:00.0: PCI bridge to [bus 01]
- pci 0001:00:00.0: bridge window [mem 0x08000000-0x080fffff]
- PCIE2 link=1
- PCIE2 switching to GEN2
- PCIE2 link=1
- PCI host bridge to bus 0002:00
- pci_bus 0002:00: root bus resource [mem 0x40000000-0x47ffffff]
- pci_bus 0002:00: No busn resource found for root bus, will use [bus 00-ff]
- pci 0002:00:00.0: [14e4:8011] type 01 class 0x060400
- pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
- PCI: Fixing up bus 0
- PCI: bus0: Fast back to back transfers disabled
- pci 0002:02:00.0: [14e4:a8db] type 00 class 0x028000
- pci 0002:02:00.0: reg 10: [mem 0x00000000-0x00007fff 64bit]
- pci 0002:02:00.0: supports D1 D2
- PCI: Fixing up bus 2
- PCI: bus2: Fast back to back transfers disabled
- pci_bus 0002:02: busn_res: [bus 02-ff] end is updated to 02
- pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 02
- pci 0002:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
- pci 0002:02:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bit]
- pci 0002:00:00.0: PCI bridge to [bus 02]
- pci 0002:00:00.0: bridge window [mem 0x40000000-0x400fffff]
- PCIE3 link=0
- Error creating gpio class
- squashfs: version 3.0 (2006/03/15) Phillip Lougher
- msgmni has been set to 243
- alg: No test for stdrng (krng)
- io scheduler noop registered
- io scheduler cfq registered (default)
- Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
- serial8250.0: ttyS0 at MMIO 0x18000300 (irq = 117) is a 16550
- console [ttyS0] enabled
- serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
- brd: module loaded
- loop: module loaded
- bcmsflash: found no supported devices
- Buffalo WZR-900DHP dualboot
- The first offset=200000, 2nd offset=2100000
- Boot partition size = 524288(0x80000)
- lookup_nflash_rootfs_offset: offset = 0x200000, 0x20000
- found TRX Header on nflash!
- nflash: squash filesystem with lzma found at block 27
- lookup_nflash_rootfs_offset: offset = 0x2100000, 0x20000
- found TRX Header on nflash!
- Creating 6 MTD partitions on "nflash":
- 0x000000000000-0x000000080000 : "boot"
- 0x0000000a0000-0x000000200000 : "nvram"
- 0x000000200000-0x000002100000 : "linux"
- 0x000000360000-0x000002000000 : "rootfs"
- 0x000002100000-0x000004000000 : "linux2"
- 0x000004017800-0x000104000000 : "rootfs2"
- mtd: partition "rootfs2" extends beyond the end of device "nflash" -- size truncated to 0x3fe8800
- tun: Universal TUN/TAP device driver, 1.6
- tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- PPP generic driver version 2.4.2
- PPP BSD Compression module registered
- PPP Deflate Compression module registered
- PPP MPPE Compression module registered
- NET: Registered protocol family 24
- GACT probability NOT on
- Mirror/redirect action on
- Failed to load ipt action
- Simple TC action Loaded
- netem: version 1.3
- u32 classifier
- Performance counters on
- input device check on
- Actions configured
- Netfilter messages via NETLINK v0.30.
- nf_conntrack version 0.5.0 (3993 buckets, 15972 max)
- nf_conntrack_rtsp v0.6.21 loading
- xt_time: kernel timezone is -0000
- ip_set: protocol 6
- gre: GRE over IPv4 demultiplexor driver
- nf_nat_rtsp v0.6.21 loading
- ip_tables: (C) 2000-2006 Netfilter Core Team
- TCP: bic registered
- TCP: cubic registered
- TCP: westwood registered
- TCP: highspeed registered
- TCP: hybla registered
- TCP: htcp registered
- TCP: vegas registered
- TCP: veno registered
- TCP: scalable registered
- TCP: lp registered
- TCP: yeah registered
- TCP: illinois registered
- NET: Registered protocol family 17
- Bridge firewalling registered
- 8021q: 802.1Q VLAN Support v1.8
- Key type encrypted registered
- Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
- NAND device: Manufacturer ID: 0x92, Chip ID: 0xf1 (Eon NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
- Spare area=64 eccbytes 56, ecc bytes located at:
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
- Available 7 bytes at (off,len):
- (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
- Driver must set ecc.strength when using hardware ECC
- Scanning device for bad blocks
- Bad eraseblock 1023 at 0x000007fe0000
- Options: NO_SUBPAGE_WRITE,
- Buffalo WZR-900DHP dualboot
- Creating 1 MTD partitions on "brcmnand":
- 0x000004800000-0x000007f00000 : "ddwrt"
- VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
- Freeing unused kernel memory: 188K (c0377000 - c03a6000)
- softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1)
- et: module license 'Proprietary' taints kernel.
- Disabling lock debugging due to kernel taint
- et_module_init: passivemode set to 0x0
- et_module_init: txworkq set to 0x0
- et_module_init: et_txq_thresh set to 0x400
- et0: online cpus 1
- eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.42 (r396477)
- roboswitch: Probing device 'eth0'
- roboswitch: trying a 53011! at eth0
- roboswitch: found a 53011! at eth0
- PCI: Enabling device 0001:01:00.0 (0140 -> 0142)
- PCI: Enabling device 0002:02:00.0 (0140 -> 0142)
- eth0: mixed HW and IP checksum settings.
- device vlan1 entered promiscuous mode
- device eth0 entered promiscuous mode
- device eth1 entered promiscuous mode
- device eth2 entered promiscuous mode
- br0: port 3(eth2) entered forwarding state
- br0: port 3(eth2) entered forwarding state
- br0: port 2(eth1) entered forwarding state
- br0: port 2(eth1) entered forwarding state
- br0: port 1(vlan1) entered forwarding state
- br0: port 1(vlan1) entered forwarding state
- device vlan2 entered promiscuous mode
- device vlan2 left promiscuous mode
- br0: port 3(eth2) entered forwarding state
- br0: port 2(eth1) entered forwarding state
- br0: port 1(vlan1) entered forwarding state
- root@DD-WRT:~# lspci
- 0000:00:00.0 FLASH memory: Broadcom Corporation Sentry5 Chipcommon I/O Controller
- 0000:00:01.0 Unassigned class [ffff]: Broadcom Corporation Device 050b
- 0000:00:02.0 Unassigned class [ffff]: Broadcom Corporation Device 0502
- 0000:00:03.0 Ethernet controller: Broadcom Corporation BCM47xx Sentry5 USB / Ethernet Controller
- 0000:00:04.0 Ethernet controller: Broadcom Corporation BCM47xx Sentry5 USB / Ethernet Controller
- 0000:00:05.0 Ethernet controller: Broadcom Corporation BCM47xx Sentry5 USB / Ethernet Controller
- 0000:00:06.0 Ethernet controller: Broadcom Corporation BCM47xx Sentry5 USB / Ethernet Controller
- 0000:00:07.0 Unassigned class [ffff]: Broadcom Corporation Device 0501
- 0000:00:08.0 Unassigned class [ffff]: Broadcom Corporation Device 0501
- 0000:00:09.0 Unassigned class [ffff]: Broadcom Corporation Device 0510
- 0000:00:0a.0 USB controller: Broadcom Corporation Device 471a
- 0000:00:0a.1 USB controller: Broadcom Corporation Device 471a
- 0000:00:0b.0 USB controller: Broadcom Corporation Device 472a
- 0000:00:0c.0 Unassigned class [ffff]: Broadcom Corporation Device 0503
- 0000:00:0d.0 Unassigned class [ffff]: Broadcom Corporation Device 0506
- 0000:00:0e.0 Unassigned class [ffff]: Broadcom Corporation Device 0507
- 0000:00:0f.0 Unassigned class [ffff]: Broadcom Corporation Device 0508
- 0000:00:10.0 Unassigned class [ffff]: Broadcom Corporation Device 0509
- 0000:00:11.0 Unassigned class [ffff]: Broadcom Corporation Device 050a
- 0001:00:00.0 PCI bridge: Broadcom Corporation Device 8011 (rev 01)
- 0001:01:00.0 Network controller: Broadcom Corporation Device a8dc
- 0002:00:00.0 PCI bridge: Broadcom Corporation Device 8011 (rev 01)
- 0002:02:00.0 Network controller: Broadcom Corporation Device a8db
- root@DD-WRT:~# lsusb
- lsusb: /sys/bus/usb/devices: No such file or directory
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement