Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Copyright (c) 1992-2011 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- »···The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 8.2-RELEASE #0: Thu Feb 17 02:41:51 UTC 2011
- [email protected]:/usr/obj/usr/src/sys/GENERIC amd64
- Timecounter "i8254" frequency 1193182 Hz quality 0
- CPU: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (3292.54-MHz K8-class CPU)
- Origin = "GenuineIntel" Id = 0x206a7 Family = 6 Model = 2a Stepping = 7
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x179ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,<b24>,AESNI,XSAVE,<b28>>
- AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
- AMD Features2=0x1<LAHF>
- TSC: P-state invariant
- real memory = 17179869184 (16384 MB)
- avail memory = 16522055680 (15756 MB)
- ACPI APIC Table: <GBT GBTUACPI>
- FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
- FreeBSD/SMP: 1 package(s) x 4 core(s)
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 2
- cpu2 (AP): APIC ID: 4
- cpu3 (AP): APIC ID: 6
- ioapic0: Changing APIC ID to 2
- ioapic0 <Version 2.0> irqs 0-23 on motherboard
- kbd1 at kbdmux0
- acpi0: <GBT GBTUACPI> on motherboard
- acpi0: [ITHREAD]
- acpi0: Power Button (fixed)
- acpi0: reservation of 0, a0000 (3) failed
- acpi0: reservation of 100000, df6d0000 (3) failed
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
- cpu0: <ACPI CPU> on acpi0
- cpu1: <ACPI CPU> on acpi0
- cpu2: <ACPI CPU> on acpi0
- cpu3: <ACPI CPU> on acpi0
- acpi_button0: <Power Button> on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- vgapci0: <VGA-compatible display> port 0xef00-0xef7f mem 0xf8000000-0xf8ffffff,0xe0000000-0xefffffff,0xf6000000-0xf7ffffff irq 16 at device 0.0 on pci1
- pci0: <simple comms> at device 22.0 (no driver attached)
- ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfbffe000-0xfbffe3ff irq 18 at device 26.0 on pci0
- ehci0: [ITHREAD]
- usbus0: EHCI version 1.0
- usbus0: <EHCI (generic) USB 2.0 controller> on ehci0
- hdac0: <Intel (Unknown) High Definition Audio Controller> mem 0xfbff4000-0xfbff7fff irq 22 at device 27.0 on pci0
- hdac0: HDA Driver Revision: 20100226_0142
- hdac0: [ITHREAD]
- pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
- pci2: <ACPI PCI bus> on pcib2
- pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
- pci3: <ACPI PCI bus> on pcib3
- pci3: <serial bus, USB> at device 0.0 (no driver attached)
- pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
- pci4: <ACPI PCI bus> on pcib4
- re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 0xde00-0xdeff mem 0xfbeff000-0xfbefffff,0xfbef8000-0xfbefbfff irq 18 at device 0.0 on pci4
- re0: Using 1 MSI messages
- re0: Chip rev. 0x2c000000
- re0: MAC rev. 0x00000000
- miibus0: <MII bus> on re0
- rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
- rgephy0: 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
- re0: Ethernet address: XX:XX:XX:XX:XX:XX
- re0: [FILTER]
- pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
- pci5: <ACPI PCI bus> on pcib5
- pcib6: <PCI-PCI bridge> irq 19 at device 0.0 on pci5
- pci6: <PCI bus> on pcib6
- ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfbffd000-0xfbffd3ff irq 23 at device 29.0 on pci0
- ehci1: [ITHREAD]
- usbus1: EHCI version 1.0
- usbus1: <EHCI (generic) USB 2.0 controller> on ehci1
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- ahci0: <Intel Cougar Point AHCI SATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb1f mem 0xfbffc000-0xfbffc7ff irq 19 at device 31.2 on pci0
- ahci0: [ITHREAD]
- ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier supported
- ahcich0: <AHCI channel> at channel 0 on ahci0
- ahcich0: [ITHREAD]
- ahcich1: <AHCI channel> at channel 1 on ahci0
- ahcich1: [ITHREAD]
- ahcich2: <AHCI channel> at channel 2 on ahci0
- ahcich2: [ITHREAD]
- ahcich3: <AHCI channel> at channel 3 on ahci0
- ahcich3: [ITHREAD]
- ahcich4: <AHCI channel> at channel 4 on ahci0
- ahcich4: [ITHREAD]
- ahcich5: <AHCI channel> at channel 5 on ahci0
- ahcich5: [ITHREAD]
- pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
- acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 900
- atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
- uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- uart0: [FILTER]
- orm0: <ISA Option ROM> at iomem 0xce000-0xd07ff on isa0
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- atkbd0: [ITHREAD]
- ppc0: cannot reserve I/O port range
- est0: <Enhanced SpeedStep Frequency Control> on cpu0
- p4tcc0: <CPU Frequency Thermal Control> on cpu0
- est1: <Enhanced SpeedStep Frequency Control> on cpu1
- p4tcc1: <CPU Frequency Thermal Control> on cpu1
- est2: <Enhanced SpeedStep Frequency Control> on cpu2
- p4tcc2: <CPU Frequency Thermal Control> on cpu2
- est3: <Enhanced SpeedStep Frequency Control> on cpu3
- p4tcc3: <CPU Frequency Thermal Control> on cpu3
- ZFS filesystem version 4
- ZFS storage pool version 15
- Timecounters tick every 1.000 msec
- hdac0: HDA Codec #2: Realtek ALC889
- usbus0: 480Mbps High Speed USB v2.0
- usbus1: 480Mbps High Speed USB v2.0
- pcm0: <HDA Realtek ALC889 PCM #0 Analog> at cad 2 nid 1 on hdac0
- pcm1: <HDA Realtek ALC889 PCM #1 Analog> at cad 2 nid 1 on hdac0
- pcm2: <HDA Realtek ALC889 PCM #2 Digital> at cad 2 nid 1 on hdac0
- pcm3: <HDA Realtek ALC889 PCM #3 Digital> at cad 2 nid 1 on hdac0
- ugen0.1: <Intel> at usbus0
- uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
- ugen1.1: <Intel> at usbus1
- uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
- ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
- ada0: <SAMSUNG HD502HJ 1AJ10001> ATA-8 SATA 2.x device
- ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada0: Command Queueing enabled
- ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
- ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
- ada1: <C300-CTFDDAC064MAG 0006> ATA-9 SATA 3.x device
- ada1: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
- ada1: Command Queueing enabled
- ada1: 61057MB (125045424 512 byte sectors: 16H 63S/T 16383C)
- SMP: AP CPU #3 Launched!
- SMP: AP CPU #2 Launched!
- SMP: AP CPU #1 Launched!
- Root mount waiting for: usbus1 usbus0
- uhub0: 2 ports with 2 removable, self powered
- uhub1: 2 ports with 2 removable, self powered
- Root mount waiting for: usbus1 usbus0
- ugen1.2: <vendor 0x8087> at usbus1
- uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
- ugen0.2: <vendor 0x8087> at usbus0
- uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
- uhub3: 6 ports with 6 removable, self powered
- uhub2: 8 ports with 8 removable, self powered
- ugen0.3: <Microsoft> at usbus0
- ums0: <Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), class 0/0, rev 1.10/3.00, addr 3> on usbus0
- ums0: 3 buttons and [XYZ] coordinates ID=0
- Root mount waiting for: usbus1
- ugen1.3: <I-O DATA DEVICE,INC.> at usbus1
- umass0: <I-O DATA DEVICE,INC. I-O DATA iU-CD2, class 0/0, rev 2.00/11.05, addr 3> on usbus1
- umass0: SCSI over Bulk-Only; quirks = 0x0000
- umass0:6:0:-1: Attached to scbus6
- (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0·
- (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
- (probe0:umass-sim0:0:0:0): SCSI status: Check Condition
- (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
- cd0 at umass-sim0 bus 0 scbus6 target 0 lun 0
- cd0: <_NEC DVD_RW ND-1300A 1.08> Removable CD-ROM SCSI-0 device·
- cd0: 40.000MB/s transfers
- cd0: Attempt to query device size failed: NOT READY, Medium not present
- Root mount waiting for: usbus1
- ugen1.4: <Apple, Inc.> at usbus1
- uhub4: <Apple, Inc. Keyboard Hub, class 9/0, rev 2.00/94.15, addr 4> on usbus1
- uhub4: 3 ports with 2 removable, bus powered
- Root mount waiting for: usbus1
- ugen1.5: <Apple, Inc> at usbus1
- ukbd0: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.67, addr 5> on usbus1
- kbd2 at ukbd0
- uhid0: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.67, addr 5> on usbus1
- Trying to mount root from zfs:pool0/ROOT/freebsd
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement