API tools faq
paste
Advertisement
Guest User

Broly 4.9.17 DD-WRT w/ CPU_IDLE (need wlan/emf HF ko files)

a guest
Mar 22nd, 2017
187
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 10.23 KB | None | 0 0
raw download clone embed print report
  1. Decompressing...done
  2.  
  3.  
  4. CFE for Foxconn Router R7000 version: v1.0.22
  5. Build Date: Wed Mar 19 11:14:20 CST 2014
  6. Init Arena
  7. Init Devs.
  8. Boot up from NAND flash...
  9. Bootcode Boot partition size = 524288(0x80000)
  10. DDR Clock: 800 MHz
  11. Info: DDR frequency set from clkfreq=1000,*800*
  12. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.15.1 (r407936)
  13. et1: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.15.1 (r407936)
  14. CPU type 0x0: 1000MHz
  15. Tot mem: 262144 KBytes
  16.  
  17. Committing NVRAM...done
  18. Device eth0:  hwaddr A0-63-91-41-72-2F, ipaddr 192.168.1.1, mask 255.255.255.0
  19.         gateway not set, nameserver not set
  20. Loader:raw Filesys:tftp Dev:eth0 File:192.168.1.2:vmlinuz Options:(null)
  21. Loading: Failed.
  22. Could not load 192.168.1.2:vmlinuz: Timeout occured
  23. Checking crc...Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)
  24. Loading: ... 1680592 bytes read
  25. Entry at 0x00008000
  26. Closing network.
  27. Starting program at 0x00008000
  28. Uncompressing Linux... done, booting the kernel.
  29. ** 45 printk messages dropped ** 2 cores has been found
  30. Setting up static identity map for 0x8600 - 0x8634
  31. L2C: platform provided aux values permit register corruption.
  32. L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x7a530000
  33. L2C-310 erratum 769419 enabled
  34. L2C-310 enabling early BRESP for Cortex-A9
  35. L2C-310 full line of zeros enabled for Cortex-A9
  36. L2C-310 dynamic clock gating enabled, standby mode enabled
  37. L2C-310 cache controller enabled, 16 ways, 256 kB
  38. L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x4e530001
  39. CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  40. Brought up 2 CPUs
  41. SMP: Total of 2 processors activated (3981.31 BogoMIPS).
  42. VFP support v0.3: not present
  43. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  44. futex hash table entries: 512 (order: 3, 32768 bytes)
  45. NET: Registered protocol family 16
  46. DMA: preallocated 256 KiB pool for atomic coherent allocations
  47. coherence_win_size = 10000000
  48. coherence_flag = FFFFFFF8
  49. ddr_phys_offset_va =FFFFFFFF
  50. ddr_phys_offset2_va =A8000000
  51. Found a AMD NAND flash:
  52. Total size:  128MB
  53. Block size:  128KB
  54. Page Size:   2048B
  55. OOB Size:    64B
  56. Sector size: 512B
  57. Spare size:  16B
  58. ECC level:   8 (8-bit)
  59. Device ID: 0x 1 0xf1 0x80 0x1d 0x 1 0xf1
  60. found nand nvram at 80000
  61. CCA UART Clock Config: Sel=1 Ovr=1 Div=48
  62. CCA UART Clock rate 125000000Hz CCB UART Clock rate 125000000Hz
  63. arm-lpae io-pgtable: selftest: pgsize_bitmap 0x40201000, IAS 32
  64. arm-lpae io-pgtable: selftest: pgsize_bitmap 0x40201000, IAS 36
  65. arm-lpae io-pgtable: selftest: pgsize_bitmap 0x40201000, IAS 40
  66. arm-lpae io-pgtable: selftest: pgsize_bitmap 0x40201000, IAS 42
  67. arm-lpae io-pgtable: selftest: pgsize_bitmap 0x40201000, IAS 44
  68. arm-lpae io-pgtable: selftest: pgsize_bitmap 0x40201000, IAS 48
  69. arm-lpae io-pgtable: selftest: pgsize_bitmap 0x02004000, IAS 32
  70. arm-lpae io-pgtable: selftest: pgsize_bitmap 0x02004000, IAS 36
  71. arm-lpae io-pgtable: selftest: pgsize_bitmap 0x02004000, IAS 40
  72. arm-lpae io-pgtable: selftest: pgsize_bitmap 0x02004000, IAS 42
  73. arm-lpae io-pgtable: selftest: pgsize_bitmap 0x02004000, IAS 44
  74. arm-lpae io-pgtable: selftest: pgsize_bitmap 0x02004000, IAS 48
  75. arm-lpae io-pgtable: selftest: pgsize_bitmap 0x20010000, IAS 32
  76. arm-lpae io-pgtable: selftest: pgsize_bitmap 0x20010000, IAS 36
  77. arm-lpae io-pgtable: selftest: pgsize_bitmap 0x20010000, IAS 40
  78. arm-lpae io-pgtable: selftest: pgsize_bitmap 0x20010000, IAS 42
  79. arm-lpae io-pgtable: selftest: pgsize_bitmap 0x20010000, IAS 44
  80. arm-lpae io-pgtable: selftest: pgsize_bitmap 0x20010000, IAS 48
  81. arm-lpae io-pgtable: selftest: completed with 18 PASS 0 FAIL
  82. clocksource: Switched to clocksource mpcore_gtimer
  83. NET: Registered protocol family 2
  84. TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  85. TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
  86. TCP: Hash tables configured (established 1024 bind 1024)
  87. UDP hash table entries: 256 (order: 1, 8192 bytes)
  88. UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  89. NET: Registered protocol family 1
  90. NetWinder Floating Point Emulator V0.97 (extended precision)
  91. init gpio code
  92. Netgear R7000 init
  93. PCI: no core
  94. PCI: no core
  95. PCI: scanning bus 0
  96. PCI host bridge to bus 0000:00
  97. pci_bus 0000:00: root bus resource [io  0x0000-0xffffffff]
  98. pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
  99. pci_bus 0000:00: root bus resource [bus 00-ff]
  100. pci 0000:00:11.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
  101. PCI: Fixing up bus 0 domain 0
  102. PCIE1 link=1
  103. PCIE1 switching to GEN2
  104. PCIE1 link=1
  105. PCI host bridge to bus 0001:00
  106. pci_bus 0001:00: root bus resource [mem 0x08000000-0x0fffffff]
  107. pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
  108. PCI: Fixing up bus 0 domain 1
  109. PCI: bus0: Fast back to back transfers disabled
  110. pci 0001:01:00.0: Max Payload Size set to 512 (was 128, max 512)
  111. PCI: Fixing up bus 1 domain 1
  112. PCI: bus1: Fast back to back transfers disabled
  113. pci 0001:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
  114. pci 0001:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
  115. pci 0001:00:00.0: PCI bridge to [bus 01]
  116. pci 0001:00:00.0:   bridge window [mem 0x08000000-0x080fffff]
  117. PCIE2 link=1
  118. PCIE2 switching to GEN2
  119. PCIE2 link=1
  120. PCI host bridge to bus 0002:00
  121. pci_bus 0002:00: root bus resource [mem 0x40000000-0x47ffffff]
  122. pci_bus 0002:00: No busn resource found for root bus, will use [bus 00-ff]
  123. PCI: Fixing up bus 0 domain 2
  124. PCI: bus0: Fast back to back transfers disabled
  125. pci 0002:01:00.0: Max Payload Size set to 512 (was 128, max 512)
  126. PCI: Fixing up bus 1 domain 2
  127. PCI: bus1: Fast back to back transfers disabled
  128. pci 0002:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
  129. pci 0002:01:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bit]
  130. pci 0002:00:00.0: PCI bridge to [bus 01]
  131. pci 0002:00:00.0:   bridge window [mem 0x40000000-0x400fffff]
  132. PCIE3 link=0
  133. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  134. io scheduler noop registered (default)
  135. io scheduler cfq registered
  136. serial8250_init
  137. Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
  138. console [ttyS0] disabled
  139. serial8250.0: ttyS0 at MMIO 0x18000300 (irq = 117, base_baud = 7812500) is a 16550
  140. console [ttyS0] enabled
  141. serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117, base_baud = 7812500) is a 16550
  142. brd: module loaded
  143. loop: module loaded
  144. bcmsflash: found no supported devices
  145. Boot partition size = 524288(0x80000)
  146. lookup_nflash_rootfs_offset: offset = 0x200000 size = 0x2000000, 0x20000
  147. found TRX Header on nflash!
  148. nflash: squash filesystem with lzma found at block 29
  149. Creating 5 MTD partitions on "nflash":
  150. 0x000000000000-0x000000080000 : "boot"
  151. 0x000000080000-0x000000200000 : "nvram"
  152. 0x000000200000-0x000002200000 : "linux"
  153. 0x0000003a0000-0x000002200000 : "rootfs"
  154. 0x000002200000-0x000002240000 : "board_data"
  155. tun: Universal TUN/TAP device driver, 1.6
  156. tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  157. PPP generic driver version 2.4.2
  158. PPP BSD Compression module registered
  159. PPP Deflate Compression module registered
  160. PPP MPPE Compression module registered
  161. NET: Registered protocol family 24
  162. GACT probability NOT on
  163. Mirror/redirect action on
  164. Simple TC action Loaded
  165. netem: version 1.3
  166. u32 classifier
  167.    Performance counters on
  168.    input device check on
  169.    Actions configured
  170. Netfilter messages via NETLINK v0.30.
  171. nf_conntrack version 0.5.0 (3970 buckets, 15880 max)
  172. nf_conntrack_rtsp v0.7 loading
  173. xt_time: kernel timezone is -0000
  174. ip_set: protocol 6
  175. gre: GRE over IPv4 demultiplexor driver
  176. nf_nat_rtsp v0.7 loading
  177. ip_tables: (C) 2000-2006 Netfilter Core Team
  178. NET: Registered protocol family 17
  179. bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  180. Bridge firewalling registered
  181. 8021q: 802.1Q VLAN Support v1.8
  182. ThumbEE CPU extension supported.
  183. Registering SWP/SWPB emulation handler
  184. max nvram space = 131072
  185. read 65536 bytes to offset 0
  186. Key type encrypted registered
  187. Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
  188. nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
  189. nand: AMD/Spansion NAND 128MiB 3,3V 8-bit
  190. nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  191. Spare area=64 eccbytes 56, ecc bytes located at:
  192. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
  193. Available 7 bytes at (off,len):
  194. (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
  195. Scanning device for bad blocks
  196. Options: NO_SUBPAGE_WRITE,
  197. Creating 1 MTD partitions on "brcmnand":
  198. 0x000002240000-0x000008000000 : "ddwrt"
  199. VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
  200. Freeing unused kernel memory: 348K (804a7000 - 804fe000)
  201. Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
  202.  
  203. CPU1: stopping
  204. CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.52 #24
  205. Hardware name: Northstar Prototype
  206. Backtrace:
  207. [<8002d150>] (dump_backtrace) from [<8002d324>] (show_stack+0x18/0x1c)
  208. r7:87853f58 r6:60000193 r5:8051f3dc r4:00000000
  209. [<8002d30c>] (show_stack) from [<80171540>] (dump_stack+0x94/0xa8)
  210. [<801714ac>] (dump_stack) from [<8002ef88>] (handle_IPI+0x110/0x1a8)
  211. r7:87853f58 r6:00000001 r5:00000000 r4:805321ac
  212. [<8002ee78>] (handle_IPI) from [<800093dc>] (gic_handle_irq+0x78/0x7c)
  213. r7:b0100100 r6:87853f58 r5:b010010c r4:8050db18
  214. [<80009364>] (gic_handle_irq) from [<8000ab40>] (__irq_svc+0x40/0x54)
  215. Exception stack(0x87853f58 to 0x87853fa0)
  216. 3f40:                                                       86ddf248 00000000
  217. 3f60: 00000a68 8000b7c0 87852000 8050d8e0 80442c78 804f9224 87853fc8 413fc090
  218. 3f80: 00000000 87853fb4 87853fb8 87853fa8 8002a9c0 8002a9c4 60000113 ffffffff
  219. r9:413fc090 r8:87853fc8 r7:87853f8c r6:ffffffff r5:60000113 r4:8002a9c4
  220. [<8002a988>] (arch_cpu_idle) from [<800806d4>] (default_idle_call+0x30/0x34)
  221. [<800806a4>] (default_idle_call) from [<800807e0>] (cpu_startup_entry+0x108/0x13c)
  222. [<800806d8>] (cpu_startup_entry) from [<8002ec5c>] (secondary_start_kernel+0x150/0x158)
  223. r7:805321b0 r4:8051c9e0
  224. [<8002eb0c>] (secondary_start_kernel) from [<00009468>] (0x9468)
  225. r5:00000055 r4:0782c06a
  226. Rebooting in 10 seconds..Digital core power voltage set to 1.0V
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!