Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Using username "root".
- root@recalbox's password:
- # dmesg
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 4.1.19-v7 (root@32aef1eef649) (gcc version 4.9.3 (B uildroot 2016.02-git-g2db76d4-dirty) ) #1 SMP Mon Oct 31 20:09:55 UTC 2016
- [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache
- [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
- [ 0.000000] cma: Reserved 8 MiB at 0x1e400000
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] On node 0 totalpages: 126976
- [ 0.000000] free_area_init_node: node 0, pgdat 80880fc0, node_mem_map 9dfa400 0
- [ 0.000000] Normal zone: 1116 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 126976 pages, LIFO batch:31
- [ 0.000000] [bcm2709_smp_init_cpus] enter (9420->f3003010)
- [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
- [ 0.000000] PERCPU: Embedded 12 pages/cpu @9efb1000 s20416 r8192 d20544 u4915 2
- [ 0.000000] pcpu-alloc: s20416 r8192 d20544 u49152 alloc=12*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 125860
- [ 0.000000] Kernel command line: 8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2708_ fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2709.boardrev=0xa22082 bcm2709.seria l=0xdb79fe46 smsc95xx.macaddr=B8:27:EB:79:FE:46 bcm2708_fb.fbswap=1 bcm2709.uart _clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.f iq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty3 loglevel=3 elevator=deadline vt.global_cursor_default=0 logo.nologo root=/dev/m mcblk0p7 rootwait fastboot noswap ro
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 485052K/507904K available (6064K kernel code, 534K rwdata , 1664K rodata, 444K init, 757K bss, 14660K reserved, 8192K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- [ 0.000000] vmalloc : 0x9f800000 - 0xff000000 (1528 MB)
- [ 0.000000] lowmem : 0x80000000 - 0x9f000000 ( 496 MB)
- [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
- [ 0.000000] .text : 0x80008000 - 0x807945dc (7730 kB)
- [ 0.000000] .init : 0x80795000 - 0x80804000 ( 444 kB)
- [ 0.000000] .data : 0x80804000 - 0x80889b10 ( 535 kB)
- [ 0.000000] .bss : 0x8088c000 - 0x809497dc ( 758 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] Additional per-CPU info printed with stalls.
- [ 0.000000] NR_IRQS:608
- [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
- [ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
- [ 0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 43980 46511078ns
- [ 0.000025] Switching to timer-based delay loop, resolution 52ns
- [ 0.000245] Console: colour dummy device 80x30
- [ 0.000444] console [tty3] enabled
- [ 0.000476] Calibrating delay loop (skipped), value calculated using timer fr equency.. 38.40 BogoMIPS (lpj=192000)
- [ 0.000495] pid_max: default: 32768 minimum: 301
- [ 0.000792] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000807] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.001762] Initializing cgroup subsys blkio
- [ 0.001788] Initializing cgroup subsys memory
- [ 0.001811] Initializing cgroup subsys devices
- [ 0.001830] Initializing cgroup subsys freezer
- [ 0.001855] Initializing cgroup subsys net_cls
- [ 0.001903] CPU: Testing write buffer coherency: ok
- [ 0.001963] ftrace: allocating 20313 entries in 60 pages
- [ 0.048786] CPU0: update cpu_capacity 1024
- [ 0.048816] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.048829] [bcm2709_smp_prepare_cpus] enter
- [ 0.048977] Setting up static identity map for 0x8240 - 0x8274
- [ 0.050749] [bcm2709_boot_secondary] cpu:1 started (0) 18
- [ 0.050949] [bcm2709_secondary_init] enter cpu:1
- [ 0.050993] CPU1: update cpu_capacity 1024
- [ 0.050999] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.051379] [bcm2709_boot_secondary] cpu:2 started (0) 18
- [ 0.051545] [bcm2709_secondary_init] enter cpu:2
- [ 0.051567] CPU2: update cpu_capacity 1024
- [ 0.051573] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.051935] [bcm2709_boot_secondary] cpu:3 started (0) 18
- [ 0.052066] [bcm2709_secondary_init] enter cpu:3
- [ 0.052087] CPU3: update cpu_capacity 1024
- [ 0.052093] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.052155] Brought up 4 CPUs
- [ 0.052178] SMP: Total of 4 processors activated (153.60 BogoMIPS).
- [ 0.052186] CPU: All CPU(s) started in HYP mode.
- [ 0.052193] CPU: Virtualization extensions available.
- [ 0.052872] devtmpfs: initialized
- [ 0.071762] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
- [ 0.071993] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max _idle_ns: 19112604462750000 ns
- [ 0.072808] pinctrl core: initialized pinctrl subsystem
- [ 0.073342] NET: Registered protocol family 16
- [ 0.078593] DMA: preallocated 4096 KiB pool for atomic coherent allocations
- [ 0.079704] bcm2709.uart_clock = 48000000
- [ 0.083605] bcm2709: Mini UART enabled
- [ 0.084098] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.084110] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.084263] Serial: AMBA PL011 UART driver
- [ 0.084307] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gp io@7e200000/uart0_pins, deferring probe
- [ 0.084468] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
- [ 0.149537] bcm2708-dmaengine 3f007000.dma: DMA legacy API manager at f300700 0, dmachans=0xf35
- [ 0.149570] bcm2708-dmaengine 3f007000.dma: Initialized 7 DMA channels (+ 1 l egacy)
- [ 0.150123] bcm2708-dmaengine 3f007000.dma: Load BCM2835 DMA engine driver
- [ 0.150137] bcm2708-dmaengine 3f007000.dma: dma_debug:0
- [ 0.150706] SCSI subsystem initialized
- [ 0.150889] usbcore: registered new interface driver usbfs
- [ 0.150975] usbcore: registered new interface driver hub
- [ 0.151073] usbcore: registered new device driver usb
- [ 0.151613] raspberrypi-firmware soc:firmware: Attached to firmware from 2016 -03-09 18:11
- [ 0.178828] Switched to clocksource arch_sys_counter
- [ 0.219942] FS-Cache: Loaded
- [ 0.220195] CacheFiles: Loaded
- [ 0.229529] NET: Registered protocol family 2
- [ 0.230473] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.230541] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.230640] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.230705] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.230735] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.231017] NET: Registered protocol family 1
- [ 0.231325] RPC: Registered named UNIX socket transport module.
- [ 0.231335] RPC: Registered udp transport module.
- [ 0.231344] RPC: Registered tcp transport module.
- [ 0.231352] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.232426] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counter s available
- [ 0.233476] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.246857] VFS: Disk quotas dquot_6.6.0
- [ 0.247171] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.249232] FS-Cache: Netfs 'nfs' registered for caching
- [ 0.250142] NFS: Registering the id_resolver key type
- [ 0.250184] Key type id_resolver registered
- [ 0.250193] Key type id_legacy registered
- [ 0.252239] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 52)
- [ 0.252378] io scheduler noop registered
- [ 0.252397] io scheduler deadline registered (default)
- [ 0.252667] io scheduler cfq registered
- [ 0.254914] BCM2708FB: allocated DMA memory de800000
- [ 0.254940] BCM2708FB: allocated DMA channel 0 @ f3007000
- [ 0.285411] Console: switching to colour frame buffer device 240x67
- [ 0.303805] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
- [ 0.305305] 3f215040.uart: ttyS0 at MMIO 0x3f215040 (irq = 29, base_baud = 50 000000) is a 16550
- [ 0.306219] vc-cma: Videocore CMA driver
- [ 0.306230] vc-cma: vc_cma_base = 0x00000000
- [ 0.306240] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
- [ 0.306248] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
- [ 0.306418] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000 000(1008 MiB)
- [ 0.317935] brd: module loaded
- [ 0.324976] loop: module loaded
- [ 0.325833] vchiq: vchiq_init_state: slot_zero = 0x9e880000, is_master = 0
- [ 0.327352] Loading iSCSI transport class v2.0-870.
- [ 0.328011] usbcore: registered new interface driver smsc95xx
- [ 0.328060] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- [ 0.528349] Core Release: 2.80a
- [ 0.528362] Setting default values for core params
- [ 0.528398] Finished setting default values for core params
- [ 0.728746] Using Buffer DMA mode
- [ 0.728757] Periodic Transfer Interrupt Enhancement - disabled
- [ 0.728765] Multiprocessor Interrupt Enhancement - disabled
- [ 0.728774] OTG VER PARAM: 0, OTG VER FLAG: 0
- [ 0.728801] Dedicated Tx FIFOs mode
- [ 0.729104] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0x9e8 14000 dma = 0xde814000 len=9024
- [ 0.729134] FIQ FSM acceleration enabled for :
- [ 0.729134] Non-periodic Split Transactions
- [ 0.729134] Periodic Split Transactions
- [ 0.729134] High-Speed Isochronous Endpoints
- [ 0.729153] dwc_otg: Microframe scheduler enabled
- [ 0.729198] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80417640
- [ 0.729212] WARN::hcd_init_fiq:413: FIQ ASM at 0x804179b0 length 36
- [ 0.729226] WARN::hcd_init_fiq:438: MPHI regs_base at 0x9f89c000
- [ 0.729259] dwc_otg 3f980000.usb: DWC OTG Controller
- [ 0.729294] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
- [ 0.729326] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000
- [ 0.729378] Init: Port Power? op_state=1
- [ 0.729386] Init: Power Port (0)
- [ 0.729581] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.729596] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
- [ 0.729608] usb usb1: Product: DWC OTG Controller
- [ 0.729621] usb usb1: Manufacturer: Linux 4.1.19-v7 dwc_otg_hcd
- [ 0.729633] usb usb1: SerialNumber: 3f980000.usb
- [ 0.730295] hub 1-0:1.0: USB hub found
- [ 0.730340] hub 1-0:1.0: 1 port detected
- [ 0.730721] dwc_otg: FIQ enabled
- [ 0.730730] dwc_otg: NAK holdoff enabled
- [ 0.730738] dwc_otg: FIQ split-transaction FSM enabled
- [ 0.730769] Module dwc_common_port init
- [ 0.731033] usbcore: registered new interface driver usb-storage
- [ 0.731215] mousedev: PS/2 mouse device common for all mice
- [ 0.732290] bcm2835-cpufreq: min=600000 max=1200000
- [ 0.734334] sdhci: Secure Digital Host Controller Interface driver
- [ 0.734339] sdhci: Copyright(c) Pierre Ossman
- [ 0.734490] sdhost: log_buf @ 9e813000 (de813000)
- [ 0.808838] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
- [ 0.830965] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
- [ 0.830972] mmc-bcm2835 3f300000.mmc: DMA channel allocated
- [ 0.866316] mmc0: host does not support reading read-only switch, assuming wr ite-enable
- [ 0.868295] mmc0: new high speed SDHC card at address 0007
- [ 0.868520] mmcblk0: mmc0:0007 SD32G 29.0 GiB
- [ 0.868898] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 0.869091] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.869160] hidraw: raw HID events driver (C) Jiri Kosina
- [ 0.869269] usbcore: registered new interface driver usbhid
- [ 0.869273] usbhid: USB HID core driver
- [ 0.869493] Initializing XFRM netlink socket
- [ 0.869510] NET: Registered protocol family 17
- [ 0.869582] Key type dns_resolver registered
- [ 0.869900] Registering SWP/SWPB emulation handler
- [ 0.870237] registered taskstats version 1
- [ 0.870342] vc-sm: Videocore shared memory driver
- [ 0.870350] [vc_sm_connected_init]: start
- [ 0.870597] [vc_sm_connected_init]: end - returning 0
- [ 0.873036] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2
- [ 0.876318] mmcblk0: p1 p2 < p5 p6 p7 p8 >
- [ 0.878659] EXT4-fs (mmcblk0p7): couldn't mount as ext3 due to feature incomp atibilities
- [ 0.881003] EXT4-fs (mmcblk0p7): couldn't mount as ext2 due to feature incomp atibilities
- [ 0.895844] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 0.896073] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. O pts: (null)
- [ 0.896096] VFS: Mounted root (ext4 filesystem) readonly on device 179:7.
- [ 0.897347] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 0.898853] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 0.901544] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 0.906158] devtmpfs: mounted
- [ 0.906539] Freeing unused kernel memory: 444K (80795000 - 80804000)
- [ 0.928886] Indeed it is in host mode hprt0 = 00021501
- [ 0.988260] mmc1: new high speed SDIO card at address 0001
- [ 1.108850] usb 1-1: new high-speed USB device number 2 using dwc_otg
- [ 1.108945] Indeed it is in host mode hprt0 = 00001101
- [ 1.309060] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
- [ 1.309075] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.309506] hub 1-1:1.0: USB hub found
- [ 1.309579] hub 1-1:1.0: 5 ports detected
- [ 1.386287] udevd[99]: starting version 3.1.5
- [ 1.414555] random: udevd urandom read with 56 bits of entropy available
- [ 1.588896] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
- [ 1.620631] cfg80211: Calling CRDA to update world regulatory domain
- [ 1.650987] brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength in it done for chip 43430 rev 1 pmurev 24
- [ 1.651652] usbcore: registered new interface driver brcmfmac
- [ 1.691697] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
- [ 1.691723] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber =0
- [ 1.695285] smsc95xx v1.0.4
- [ 1.772239] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb- 1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:79:fe:46
- [ 1.780143] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Dec 15 2 015 18:10:45 version 7.45.41.23 (r606571) FWID 01-cc4eda9c
- [ 1.810172] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
- [ 2.287235] bcm2835-rng 3f104000.rng: hwrng registered
- [ 2.287509] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f2 00000
- [ 2.902199] EXT4-fs (mmcblk0p8): couldn't mount as ext3 due to feature incomp atibilities
- [ 2.902893] EXT4-fs (mmcblk0p8): couldn't mount as ext2 due to feature incomp atibilities
- [ 3.763552] EXT4-fs (mmcblk0p8): recovery complete
- [ 3.766559] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. O pts: (null)
- [ 4.778940] cfg80211: Calling CRDA to update world regulatory domain
- [ 5.078660] input: Xbox Gamepad (userspace driver) as /devices/virtual/input/ input0
- [ 5.079359] input: Xbox Gamepad (userspace driver) #2 as /devices/virtual/inp ut/input1
- [ 5.721373] Bluetooth: Core ver 2.20
- [ 5.721429] NET: Registered protocol family 31
- [ 5.721435] Bluetooth: HCI device and connection manager initialized
- [ 5.721449] Bluetooth: HCI socket layer initialized
- [ 5.721459] Bluetooth: L2CAP socket layer initialized
- [ 5.721478] Bluetooth: SCO socket layer initialized
- [ 5.786160] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 5.786173] Bluetooth: BNEP filters: protocol multicast
- [ 5.786187] Bluetooth: BNEP socket layer initialized
- [ 7.660128] random: nonblocking pool is initialized
- [ 7.680287] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
- [ 7.938876] cfg80211: Calling CRDA to update world regulatory domain
- [ 11.098861] cfg80211: Calling CRDA to update world regulatory domain
- [ 14.258912] cfg80211: Calling CRDA to update world regulatory domain
- [ 17.381536] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
- [ 17.381553] brcmfmac: brcmf_add_if: ignore IF event
- [ 17.385489] brcmfmac: power management disabled
- [ 17.418864] cfg80211: Calling CRDA to update world regulatory domain
- [ 19.765729] NET: Registered protocol family 10
- [ 19.768615] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 20.578896] cfg80211: Calling CRDA to update world regulatory domain
- [ 23.738897] cfg80211: Calling CRDA to update world regulatory domain
- [ 26.898857] cfg80211: Calling CRDA to update world regulatory domain
- [ 30.058884] cfg80211: Calling CRDA to update world regulatory domain
- [ 33.218867] cfg80211: Calling CRDA to update world regulatory domain
- [ 36.378903] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement