API tools faq
paste
Guest User

Untitled

a guest
Sep 11th, 2016
180
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 24.81 KB | None | 0 0
raw download clone embed print report
  1. $ smartctl.exe -d ata -a /dev/sda
  2. smartctl 6.5 2016-05-07 r4318 [x86_64-w64-mingw32-win7-sp1] (sf-6.5-1)
  3. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Toshiba 2.5" HDD MK..65GSX
  7. Device Model: TOSHIBA MK3265GSX
  8. Serial Number: 4095F1DPS
  9. LU WWN Device Id: 5 000039 27698213e
  10. Firmware Version: GJ003M
  11. User Capacity: 320 072 933 376 bytes [320 GB]
  12. Sector Size: 512 bytes logical/physical
  13. Rotation Rate: 5400 rpm
  14. Form Factor: 2.5 inches
  15. Device is: In smartctl database [for details use: -P show]
  16. ATA Version is: ATA8-ACS (minor revision not indicated)
  17. SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
  18. Local Time is: Sun Sep 11 10:33:37 2016 EDT
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21.  
  22. === START OF READ SMART DATA SECTION ===
  23. SMART overall-health self-assessment test result: PASSED
  24.  
  25. General SMART Values:
  26. Offline data collection status: (0x00) Offline data collection activity
  27. was never started.
  28. Auto Offline Data Collection: Disabled.
  29. Self-test execution status: ( 0) The previous self-test routine completed
  30. without error or no self-test has ever
  31. been run.
  32. Total time to complete Offline
  33. data collection: ( 120) seconds.
  34. Offline data collection
  35. capabilities: (0x5b) SMART execute Offline immediate.
  36. Auto Offline data collection on/off support.
  37. Suspend Offline collection upon new
  38. command.
  39. Offline surface scan supported.
  40. Self-test supported.
  41. No Conveyance Self-test supported.
  42. Selective Self-test supported.
  43. SMART capabilities: (0x0003) Saves SMART data before entering
  44. power-saving mode.
  45. Supports SMART auto save timer.
  46. Error logging capability: (0x01) Error logging supported.
  47. General Purpose Logging supported.
  48. Short self-test routine
  49. recommended polling time: ( 2) minutes.
  50. Extended self-test routine
  51. recommended polling time: ( 95) minutes.
  52. SCT capabilities: (0x003d) SCT Status supported.
  53. SCT Error Recovery Control supported.
  54. SCT Feature Control supported.
  55. SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 16
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
  61. 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
  62. 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1203
  63. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 11142
  64. 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 2
  65. 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
  66. 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
  67. 9 Power_On_Hours 0x0032 073 073 000 Old_age Always - 11150
  68. 10 Spin_Retry_Count 0x0033 253 100 030 Pre-fail Always - 0
  69. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 10814
  70. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 672
  71. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1649016887
  72. 193 Load_Cycle_Count 0x0032 091 091 000 Old_age Always - 91068
  73. 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 30 (Min/Max 1/44)
  74. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 2
  75. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 2
  76. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  77. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  78. 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 103
  79. 222 Loaded_Hours 0x0032 077 077 000 Old_age Always - 9549
  80. 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  81. 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
  82. 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 223
  83. 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
  84.  
  85. SMART Error Log Version: 1
  86. ATA Error Count: 1769 (device log contains only the most recent five errors)
  87. CR = Command Register [HEX]
  88. FR = Features Register [HEX]
  89. SC = Sector Count Register [HEX]
  90. SN = Sector Number Register [HEX]
  91. CL = Cylinder Low Register [HEX]
  92. CH = Cylinder High Register [HEX]
  93. DH = Device/Head Register [HEX]
  94. DC = Device Command Register [HEX]
  95. ER = Error register [HEX]
  96. ST = Status register [HEX]
  97. Powered_Up_Time is measured from power on, and printed as
  98. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  99. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  100.  
  101. Error 1769 occurred at disk power-on lifetime: 11146 hours (464 days + 10 hours)
  102. When the command that caused the error occurred, the device was active or idle.
  103.  
  104. After command completion occurred, registers were:
  105. ER ST SC SN CL CH DH
  106. -- -- -- -- -- -- --
  107. 40 51 00 3d a1 5a 4f Error: UNC at LBA = 0x0f5aa13d = 257597757
  108.  
  109. Commands leading to the command that caused the error were:
  110. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  111. -- -- -- -- -- -- -- -- ---------------- --------------------
  112. 42 00 01 3d a1 5a 40 00 01:36:56.176 READ VERIFY SECTOR(S) EXT
  113. 42 00 01 3d a1 5a 40 00 01:36:52.102 READ VERIFY SECTOR(S) EXT
  114. ec 00 00 00 00 00 00 00 01:36:52.102 IDENTIFY DEVICE
  115. ef 02 00 00 00 00 40 00 01:36:52.102 SET FEATURES [Enable write cache]
  116. ef 03 45 00 00 00 40 00 01:36:52.101 SET FEATURES [Set transfer mode]
  117.  
  118. Error 1768 occurred at disk power-on lifetime: 11146 hours (464 days + 10 hours)
  119. When the command that caused the error occurred, the device was active or idle.
  120.  
  121. After command completion occurred, registers were:
  122. ER ST SC SN CL CH DH
  123. -- -- -- -- -- -- --
  124. 40 51 00 3d a1 5a 4f Error: UNC at LBA = 0x0f5aa13d = 257597757
  125.  
  126. Commands leading to the command that caused the error were:
  127. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  128. -- -- -- -- -- -- -- -- ---------------- --------------------
  129. 42 00 01 3d a1 5a 40 00 01:36:52.102 READ VERIFY SECTOR(S) EXT
  130. ec 00 00 00 00 00 00 00 01:36:52.102 IDENTIFY DEVICE
  131. ef 02 00 00 00 00 40 00 01:36:52.102 SET FEATURES [Enable write cache]
  132. ef 03 45 00 00 00 40 00 01:36:52.101 SET FEATURES [Set transfer mode]
  133. c6 00 10 00 00 00 40 00 01:36:52.101 SET MULTIPLE MODE
  134.  
  135. Error 1767 occurred at disk power-on lifetime: 11146 hours (464 days + 10 hours)
  136. When the command that caused the error occurred, the device was active or idle.
  137.  
  138. After command completion occurred, registers were:
  139. ER ST SC SN CL CH DH
  140. -- -- -- -- -- -- --
  141. 40 51 00 3d a1 5a 4f Error: UNC at LBA = 0x0f5aa13d = 257597757
  142.  
  143. Commands leading to the command that caused the error were:
  144. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  145. -- -- -- -- -- -- -- -- ---------------- --------------------
  146. 42 00 01 3d a1 5a 40 00 01:35:23.729 READ VERIFY SECTOR(S) EXT
  147. 42 00 01 3d a1 5a 40 00 01:35:19.740 READ VERIFY SECTOR(S) EXT
  148. 42 00 01 3c a1 5a 40 00 01:35:15.751 READ VERIFY SECTOR(S) EXT
  149. 42 00 01 3c a1 5a 40 00 01:35:11.773 READ VERIFY SECTOR(S) EXT
  150. 42 00 01 3c a1 5a 40 00 01:35:07.795 READ VERIFY SECTOR(S) EXT
  151.  
  152. Error 1766 occurred at disk power-on lifetime: 11146 hours (464 days + 10 hours)
  153. When the command that caused the error occurred, the device was active or idle.
  154.  
  155. After command completion occurred, registers were:
  156. ER ST SC SN CL CH DH
  157. -- -- -- -- -- -- --
  158. 40 51 00 3d a1 5a 4f Error: UNC at LBA = 0x0f5aa13d = 257597757
  159.  
  160. Commands leading to the command that caused the error were:
  161. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  162. -- -- -- -- -- -- -- -- ---------------- --------------------
  163. 42 00 01 3d a1 5a 40 00 01:35:19.740 READ VERIFY SECTOR(S) EXT
  164. 42 00 01 3c a1 5a 40 00 01:35:15.751 READ VERIFY SECTOR(S) EXT
  165. 42 00 01 3c a1 5a 40 00 01:35:11.773 READ VERIFY SECTOR(S) EXT
  166. 42 00 01 3c a1 5a 40 00 01:35:07.795 READ VERIFY SECTOR(S) EXT
  167. 42 00 01 3c a1 5a 40 00 01:35:03.817 READ VERIFY SECTOR(S) EXT
  168.  
  169. Error 1765 occurred at disk power-on lifetime: 11146 hours (464 days + 10 hours)
  170. When the command that caused the error occurred, the device was active or idle.
  171.  
  172. After command completion occurred, registers were:
  173. ER ST SC SN CL CH DH
  174. -- -- -- -- -- -- --
  175. 40 51 00 3c a1 5a 4f Error: UNC at LBA = 0x0f5aa13c = 257597756
  176.  
  177. Commands leading to the command that caused the error were:
  178. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  179. -- -- -- -- -- -- -- -- ---------------- --------------------
  180. 42 00 01 3c a1 5a 40 00 01:35:15.751 READ VERIFY SECTOR(S) EXT
  181. 42 00 01 3c a1 5a 40 00 01:35:11.773 READ VERIFY SECTOR(S) EXT
  182. 42 00 01 3c a1 5a 40 00 01:35:07.795 READ VERIFY SECTOR(S) EXT
  183. 42 00 01 3c a1 5a 40 00 01:35:03.817 READ VERIFY SECTOR(S) EXT
  184. 42 00 01 3c a1 5a 40 00 01:34:59.829 READ VERIFY SECTOR(S) EXT
  185.  
  186. SMART Self-test log structure revision number 1
  187. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  188.  
  189. SMART Selective self-test log data structure revision number 1
  190. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  191. 1 0 0 Not_testing
  192. 2 0 0 Not_testing
  193. 3 0 0 Not_testing
  194. 4 0 0 Not_testing
  195. 5 0 0 Not_testing
  196. Selective self-test flags (0x0):
  197. After scanning selected spans, do NOT read-scan remainder of disk.
  198. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!