Pastebin launched a little side project called VERYVIRAL.com, check it out ;-) Want more features on Pastebin? Sign Up, it's FREE!
Guest

sudo smartctl -a /dev/sdX (on battery)

By: mysterio on May 29th, 2012  |  syntax: None  |  size: 9.48 KB  |  views: 136  |  expires: Never
download  |  raw  |  embed  |  report abuse  |  print
Text below is selected. Please press Ctrl+C to copy to your clipboard. (⌘+C on Mac)
  1. === START OF INFORMATION SECTION ===
  2. Model Family:     Western Digital Scorpio Blue Serial ATA
  3. Device Model:     WDC WD2500BEVS-60UST0
  4. Serial Number:    WD-WXE708H75194
  5. LU WWN Device Id: 5 0014ee 2571ceeec
  6. Firmware Version: 01.01A01
  7. User Capacity:    250,059,350,016 bytes [250 GB]
  8. Sector Size:      512 bytes logical/physical
  9. Device is:        In smartctl database [for details use: -P show]
  10. ATA Version is:   8
  11. ATA Standard is:  Exact ATA specification draft version not indicated
  12. Local Time is:    Tue May 29 16:26:45 2012 GMT
  13. SMART support is: Available - device has SMART capability.
  14. SMART support is: Enabled
  15.  
  16. === START OF READ SMART DATA SECTION ===
  17. SMART overall-health self-assessment test result: PASSED
  18. See vendor-specific Attribute list for marginal Attributes.
  19.  
  20. General SMART Values:
  21. Offline data collection status:  (0x80) Offline data collection activity
  22.                                         was never started.
  23.                                         Auto Offline Data Collection: Enabled.
  24. Self-test execution status:      (   0) The previous self-test routine completed
  25.                                         without error or no self-test has ever
  26.                                         been run.
  27. Total time to complete Offline
  28. data collection:                ( 9600) seconds.
  29. Offline data collection
  30. capabilities:                    (0x5b) SMART execute Offline immediate.
  31.                                         Auto Offline data collection on/off support.
  32.                                         Suspend Offline collection upon new
  33.                                         command.
  34.                                         Offline surface scan supported.
  35.                                         Self-test supported.
  36.                                         No Conveyance Self-test supported.
  37.                                         Selective Self-test supported.
  38. SMART capabilities:            (0x0003) Saves SMART data before entering
  39.                                         power-saving mode.
  40.                                         Supports SMART auto save timer.
  41. Error logging capability:        (0x01) Error logging supported.
  42.                                         General Purpose Logging supported.
  43. Short self-test routine
  44. recommended polling time:        (   2) minutes.
  45. Extended self-test routine
  46. recommended polling time:        ( 115) minutes.
  47. SCT capabilities:              (0x303f) SCT Status supported.
  48.                                         SCT Error Recovery Control supported.
  49.                                         SCT Feature Control supported.
  50.                                         SCT Data Table supported.
  51.  
  52. SMART Attributes Data Structure revision number: 16
  53. Vendor Specific SMART Attributes with Thresholds:
  54. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  55.   1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       13
  56.   3 Spin_Up_Time            0x0027   191   187   021    Pre-fail  Always       -       1450
  57.   4 Start_Stop_Count        0x0032   095   095   000    Old_age   Always       -       5529
  58.   5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  59.   7 Seek_Error_Rate         0x002f   100   253   051    Pre-fail  Always       -       0
  60.   9 Power_On_Hours          0x0032   093   093   000    Old_age   Always       -       5333
  61.  10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       -       0
  62.  11 Calibration_Retry_Count 0x0032   100   100   051    Old_age   Always       -       0
  63.  12 Power_Cycle_Count       0x0032   096   096   000    Old_age   Always       -       4009
  64. 187 Reported_Uncorrect      0x0032   100   094   000    Old_age   Always       -       6
  65. 188 Command_Timeout         0x0032   100   001   000    Old_age   Always       -       8590066004
  66. 190 Airflow_Temperature_Cel 0x0022   059   035   040    Old_age   Always   In_the_past 41
  67. 192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       705
  68. 193 Load_Cycle_Count        0x0032   185   185   000    Old_age   Always       -       45055
  69. 194 Temperature_Celsius     0x0022   106   082   000    Old_age   Always       -       41
  70. 196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
  71. 197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
  72. 198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
  73. 199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       2
  74. 200 Multi_Zone_Error_Rate   0x0009   100   253   051    Pre-fail  Offline      -       0
  75.  
  76. SMART Error Log Version: 1
  77. ATA Error Count: 9 (device log contains only the most recent five errors)
  78.         CR = Command Register [HEX]
  79.         FR = Features Register [HEX]
  80.         SC = Sector Count Register [HEX]
  81.         SN = Sector Number Register [HEX]
  82.         CL = Cylinder Low Register [HEX]
  83.         CH = Cylinder High Register [HEX]
  84.         DH = Device/Head Register [HEX]
  85.         DC = Device Command Register [HEX]
  86.         ER = Error register [HEX]
  87.         ST = Status register [HEX]
  88. Powered_Up_Time is measured from power on, and printed as
  89. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  90. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  91.  
  92. Error 9 occurred at disk power-on lifetime: 2948 hours (122 days + 20 hours)
  93.   When the command that caused the error occurred, the device was active or idle.
  94.  
  95.   After command completion occurred, registers were:
  96.   ER ST SC SN CL CH DH
  97.   -- -- -- -- -- -- --
  98.   40 51 08 f8 14 4d 40  Error: UNC 8 sectors at LBA = 0x004d14f8 = 5051640
  99.  
  100.   Commands leading to the command that caused the error were:
  101.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  102.   -- -- -- -- -- -- -- --  ----------------  --------------------
  103.   25 00 08 f8 14 4d 01 00      00:40:58.568  READ DMA EXT
  104.   25 00 08 a0 19 4d 01 00      00:40:58.464  READ DMA EXT
  105.   25 00 01 30 c8 96 0d 00      00:40:57.724  READ DMA EXT
  106.   25 00 50 e0 c7 96 0d 00      00:40:57.723  READ DMA EXT
  107.   25 00 08 d8 c7 96 0d 00      00:40:57.718  READ DMA EXT
  108.  
  109. Error 8 occurred at disk power-on lifetime: 1978 hours (82 days + 10 hours)
  110.   When the command that caused the error occurred, the device was active or idle.
  111.  
  112.   After command completion occurred, registers were:
  113.   ER ST SC SN CL CH DH
  114.   -- -- -- -- -- -- --
  115.   10 51 38 a8 83 5d 40  Error: IDNF 56 sectors at LBA = 0x005d83a8 = 6128552
  116.  
  117.   Commands leading to the command that caused the error were:
  118.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  119.   -- -- -- -- -- -- -- --  ----------------  --------------------
  120.   35 00 38 a8 83 5d 00 00      02:46:43.558  WRITE DMA EXT
  121.   25 00 40 1e 60 1d 1a 00      02:46:42.431  READ DMA EXT
  122.   25 00 f8 26 5f 1d 1a 00      02:46:42.252  READ DMA EXT
  123.   25 00 08 1e 5f 1d 1a 00      02:46:42.252  READ DMA EXT
  124.   25 00 69 66 eb 6f 16 00      02:46:42.241  READ DMA EXT
  125.  
  126. Error 7 occurred at disk power-on lifetime: 1425 hours (59 days + 9 hours)
  127.   When the command that caused the error occurred, the device was active or idle.
  128.  
  129.   After command completion occurred, registers were:
  130.   ER ST SC SN CL CH DH
  131.   -- -- -- -- -- -- --
  132.   01 51 78 78 8a de e0  Error: AMNF at LBA = 0x00de8a78 = 14584440
  133.  
  134.   Commands leading to the command that caused the error were:
  135.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  136.   -- -- -- -- -- -- -- --  ----------------  --------------------
  137.   29 ff 78 78 8a de 18 00      00:00:43.013  READ MULTIPLE EXT
  138.   25 ff 78 78 8a de 18 00      00:00:38.486  READ DMA EXT
  139.   29 ff 78 78 8a de 18 00      00:00:34.503  READ MULTIPLE EXT
  140.   25 ff 78 78 8a de 18 00      00:00:30.519  READ DMA EXT
  141.   29 ff 78 78 8a de 18 00      00:00:25.970  READ MULTIPLE EXT
  142.  
  143. Error 6 occurred at disk power-on lifetime: 1425 hours (59 days + 9 hours)
  144.   When the command that caused the error occurred, the device was active or idle.
  145.  
  146.   After command completion occurred, registers were:
  147.   ER ST SC SN CL CH DH
  148.   -- -- -- -- -- -- --
  149.   01 51 78 78 8a de e0  Error: AMNF 120 sectors at LBA = 0x00de8a78 = 14584440
  150.  
  151.   Commands leading to the command that caused the error were:
  152.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  153.   -- -- -- -- -- -- -- --  ----------------  --------------------
  154.   25 ff 78 78 8a de 18 00      00:00:38.486  READ DMA EXT
  155.   29 ff 78 78 8a de 18 00      00:00:34.503  READ MULTIPLE EXT
  156.   25 ff 78 78 8a de 18 00      00:00:30.519  READ DMA EXT
  157.   29 ff 78 78 8a de 18 00      00:00:25.970  READ MULTIPLE EXT
  158.   25 ff 78 78 8a de 18 00      00:00:21.448  READ DMA EXT
  159.  
  160. Error 5 occurred at disk power-on lifetime: 1425 hours (59 days + 9 hours)
  161.   When the command that caused the error occurred, the device was active or idle.
  162.  
  163.   After command completion occurred, registers were:
  164.   ER ST SC SN CL CH DH
  165.   -- -- -- -- -- -- --
  166.   01 51 78 78 8a de e0  Error: AMNF at LBA = 0x00de8a78 = 14584440
  167.  
  168.   Commands leading to the command that caused the error were:
  169.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  170.   -- -- -- -- -- -- -- --  ----------------  --------------------
  171.   29 ff 78 78 8a de 18 00      00:00:34.503  READ MULTIPLE EXT
  172.   25 ff 78 78 8a de 18 00      00:00:30.519  READ DMA EXT
  173.   29 ff 78 78 8a de 18 00      00:00:25.970  READ MULTIPLE EXT
  174.   25 ff 78 78 8a de 18 00      00:00:21.448  READ DMA EXT
  175.   25 ff 78 00 8a de 18 00      00:00:21.447  READ DMA EXT
  176.  
  177. SMART Self-test log structure revision number 1
  178. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  179. # 1  Short offline       Completed without error       00%      5207         -
  180. # 2  Short offline       Completed without error       00%      3714         -
  181.  
  182. SMART Selective self-test log data structure revision number 1
  183.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  184.     1        0        0  Not_testing
  185.     2        0        0  Not_testing
  186.     3        0        0  Not_testing
  187.     4        0        0  Not_testing
  188.     5        0        0  Not_testing
  189. Selective self-test flags (0x0):
  190.   After scanning selected spans, do NOT read-scan remainder of disk.
  191. If Selective self-test is pending on power-up, resume after 0 minute delay.