Advertisement
Guest User

Logs test

a guest
Mar 5th, 2015
194
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 4.22 KB | None | 0 0
  1. ? Sebastian would shift his gaze eyeing the cross wheel spanner from the tools shelf - ((Sebastian Bryant))
  2. ? walking towards it, curling his fingers around the wheel spanner. ((Sebastian Bryant))
  3. ? He'd then walk over towards the vehicle on the lift, trying all four spanners of the cross - ((Sebastian Bryant))
  4. ? wheel spanner until he gets the correct size. ((Sebastian Bryant))
  5. ? Upon getting the correct size, he'd press his left palm firmly against the front fender of - ((Sebastian Bryant))
  6. ? the front left wheel, as he inserts the spanner into the four wheel nuts - ((Sebastian Bryant))
  7. ? forcely moving them into a anti clockwise direction, unthreading them from the wheel. ((Sebastian Bryant))
  8. ? He'd then lay the cross wheel spanner down, as he slowly removes the wheel nuts - ((Sebastian Bryant))
  9. ? with his fingers, laying them down on the garage's floor. ((Sebastian Bryant))
  10. ? He'd then hoist the wheel away from the wheel hub, revealing this disc brakes. ((Sebastian Bryant))
  11. ? He'd rest the wheel unto the ground rolling it by the door of the storage room. ((Sebastian Bryant))
  12. ? He'd do this for all four wheels. ((Sebastian Bryant))
  13. ? The vehicle would have stock KYB gas shocks on. ((Sebastian Bryant))
  14. ? Sebastian would make his way over towards the tools shelf, placing the cross wheel spanner - ((Sebastian Bryant))
  15. ? unto the toolshelf. ((Sebastian Bryant))
  16. ? He'd then retreat to the toolbox, opening it, slipping out a socket wrench. ((Sebastian Bryant))
  17. ? He'd walk over to front left wheel hub, focusing pass it, eyeing the KYB Shock Absorbers. ((Sebastian Bryant))
  18. ? There would four bolts, bolted unto the shock absorber. ((Sebastian Bryant))
  19. ? Three at the shocktower up top, and one bolt down below. ((Sebastian Bryant))
  20. ? Sebastian would manueaver his socket wrench, aligning the socket unto the lower bolt - ((Sebastian Bryant))
  21. ? unbolting it. ((Sebastian Bryant))
  22. ? The lower bolt would be bolted unto the wheel hub. ((Sebastian Bryant))
  23. ? Upon unbolting the lower bolt, the lower end of the shock would be disengaged from the wheel ((Sebastian Bryant))
  24. ? hub. ((Sebastian Bryant))
  25. ? Sebastian would then tilt his head upwards, unbolting the three bolts from the shocktower. ((Sebastian Bryant))
  26. ? Upon removing each of the bolts, Sebastian would lay them evenly on the garage's floor. ((Sebastian Bryant))
  27. ? He'd then slide out the shock, its tip in the chassis as it begins to slide out. ((Sebastian Bryant))
  28. ? He'd do this for all four wheels. ((Sebastian Bryant))
  29. ? He'd then make his way over towards the storage room, watching a stack of Coilover - ((Sebastian Bryant))
  30. ? boxes ontop each other. ((Sebastian Bryant))
  31. ? He'd fit his fingers around the base of the first box, lifting all of the four boxes upwards ((Sebastian Bryant))
  32. ? as he makes his way over towards the Lexus. ((Sebastian Bryant))
  33. ? He'd drop each box down, opening the boxes to reveal the CS1 Coilovers. ((Sebastian Bryant))
  34. ? He'd mount the first coilover into the vehicle's chassis, which the tower should go - ((Sebastian Bryant))
  35. ? and the lower end towards the wheel hub. ((Sebastian Bryant))
  36. ? He'd use the same bolts to thread into the holes, using his socket wrench to tighten it. ((Sebastian Bryant))
  37. ? He'd adjust the coilover three clicks to the right for the suitable damping settings. ((Sebastian Bryant))
  38. ? He'd do this for all four wheels. ((Sebastian Bryant))
  39. ? He'd then walk over towards the storage room once more, gazing at a fresh stack - ((Sebastian Bryant))
  40. ? of SSR tyres, pressed into Archilles drift tyres. ((Sebastian Bryant))
  41. ? He'd start rolling out each tyre one by one, as he moves them closer towards the Lexus. ((Sebastian Bryant))
  42. ? Upon getting all four tyres over by the Lexus, he'd mount the wheels into wheel hub. ((Sebastian Bryant))
  43. ? He'd then use the previous wheel nuts, threading them into place. ((Sebastian Bryant))
  44. ? He'd walk over towards the tools shelf, gripping unto the cross wheel spanner, as he - ((Sebastian Bryant))
  45. ? moves towards the Lexus, tightening each bolt. ((Sebastian Bryant))
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement