API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 3rd, 2013
110
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 32.76 KB | None | 0 0
raw download clone embed print report
  1. Nokia-N900:~# dmesg
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 2.6.28.10-power51 (builder1@wml0226) (gcc version 4.2.1) #1 PREEMPT Mon Jul 23 16:41:15 EEST 2012
  4. [ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387f
  5. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  6. [ 0.000000] Machine: Nokia RX-51 board
  7. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  8. [ 0.000000] On node 0 totalpages: 65536
  9. [ 0.000000] free_area_init_node: node 0, pgdat c0396864, node_mem_map c03d8000
  10. [ 0.000000] Normal zone: 512 pages used for memmap
  11. [ 0.000000] Normal zone: 0 pages reserved
  12. [ 0.000000] Normal zone: 65024 pages, LIFO batch:15
  13. [ 0.000000] Movable zone: 0 pages used for memmap
  14. [ 0.000000] OMAP3430 ES3.1
  15. [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xe3000000 size: 0x100000
  16. [ 0.000000] Reserving 8388608 bytes SDRAM for VRAM
  17. [ 0.000000] VRAM: 5357568 bytes at 0x8f578000. (Detected 868352 at 0x8f9c0000)
  18. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
  19. [ 0.000000] Kernel command line: init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 snd-soc-rx51.hp_lim=42 snd-soc-tlv320aic3x.hp_dac_lim=6
  20. [ 0.000000] Clocking rate (Crystal/DPLL/ARM core): 19.2/332/500 MHz
  21. [ 0.000000] Reprogramming SDRC
  22. [ 0.000000] GPMC revision 5.0
  23. [ 0.000000] IRQ: Found an INTC at 0xd8200000 (revision 4.0) with 96 interrupts
  24. [ 0.000000] Total of 96 interrupts on 1 active controller
  25. [ 0.000000] OMAP34xx GPIO hardware version 2.5
  26. [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
  27. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  28. [ 0.000000] Console: colour dummy device 80x30
  29. [ 0.000000] console [tty0] enabled
  30. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  31. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  32. [ 0.000000] allocated 1310720 bytes of page_cgroup
  33. [ 0.000000] please try cgroup_disable=memory option if you don't want
  34. [ 0.000000] Memory: 128MB 128MB = 256MB total
  35. [ 0.000000] Memory: 234752KB available (3296K code, 445K data, 148K init)
  36. [ 0.000000] SLUB: Genslabs=8, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  37. [ 0.000000] Calibrating delay loop... 499.92 BogoMIPS (lpj=1949696)
  38. [ 0.000000] Security Framework initialized
  39. [ 0.000000] Mount-cache hash table entries: 512
  40. [ 0.000000] Initializing cgroup subsys memory
  41. [ 0.000000] Initializing cgroup subsys freezer
  42. [ 0.000000] CPU: Testing write buffer coherency: ok
  43. [ 0.000000] net_namespace: 740 bytes
  44. [ 0.000000] regulator: core version 0.5
  45. [ 0.000000] NET: Registered protocol family 16
  46. [ 0.000000] Enabling ARM errata 430973 workaround.
  47. [ 111.384307] OMAP DMA hardware revision 4.0
  48. [ 111.384429] Reserving DMA channels 0 and 1 for HS ROM code
  49. [ 111.385559] MUX: setup J21_34XX_I2C1_SDA (0xd80021bc): 0x0100 -> 0x0118
  50. [ 111.385620] MUX: setup K21_34XX_I2C1_SCL (0xd80021ba): 0x0100 -> 0x0118
  51. [ 111.385742] MUX: setup AE15_34XX_I2C2_SDA (0xd80021c0): 0x0100 -> 0x0118
  52. [ 111.385803] MUX: setup AF15_34XX_I2C2_SCL (0xd80021be): 0x0100 -> 0x0118
  53. [ 111.385925] MUX: setup AG14_34XX_I2C3_SDA (0xd80021c4): 0x0100 -> 0x0118
  54. [ 111.385986] MUX: setup AF14_34XX_I2C3_SCL (0xd80021c2): 0x0100 -> 0x0118
  55. [ 111.386444] USB: No board-specific platform config found
  56. [ 111.389556] i2c_omap i2c_omap.1: bus 1 rev3.12 at 2200 kHz
  57. [ 111.391021] TWL5030: Enabling workaround for rev 0x1009002F
  58. [ 111.408416] twl4030: PIH (irq 7) chaining IRQs 368..375
  59. [ 111.408477] twl4030: power (irq 373) chaining IRQs 376..383
  60. [ 111.408782] twl4030: gpio (irq 368) chaining IRQs 384..401
  61. [ 111.409942] regulator: VDAC: 1800 mV normal standby
  62. [ 111.410308] regulator: VUSB1V5: 1500 mV normal standby
  63. [ 111.410675] regulator: VUSB1V8: 1800 mV normal standby
  64. [ 111.411010] regulator: VUSB3V1: 3100 mV normal standby
  65. [ 111.411346] i2c_omap i2c_omap.2: bus 2 rev3.12 at 100 kHz
  66. [ 111.412475] i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz
  67. [ 111.414062] console [ttyMTD0] enabled
  68. [ 111.417694] twl4030_usb twl4030_usb: HW_CONDITIONS 0x50/80; link 1
  69. [ 111.417694] rx51_set_charger (connected = 0)
  70. [ 111.417755] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  71. [ 111.418304] usbcore: registered new interface driver usbfs
  72. [ 111.418457] usbcore: registered new interface driver hub
  73. [ 111.418762] usbcore: registered new device driver usb
  74. [ 111.418823] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
  75. [ 111.422027] HS USB OTG: revision 0x33, sysconfig 0x2010, sysstatus 0x1, intrfsel 0x1, simenable 0x0
  76. [ 111.422088] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine (X), bulk split (X), HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
  77. [ 111.422119] musb_hdrc: MHDRC RTL version 1.400
  78. [ 111.422119] musb_hdrc: setup fifo_mode 5
  79. [ 111.422149] musb_hdrc: 21/31 max ep, 9312/16384 memory
  80. [ 111.422180] musb_hdrc: hw_ep 0shared, max 64
  81. [ 111.422180] musb_hdrc: hw_ep 1tx, max 512
  82. [ 111.422180] musb_hdrc: hw_ep 1rx, max 512
  83. [ 111.422210] musb_hdrc: hw_ep 2tx, max 512
  84. [ 111.422210] musb_hdrc: hw_ep 2rx, max 512
  85. [ 111.422241] musb_hdrc: hw_ep 3tx, max 512
  86. [ 111.422241] musb_hdrc: hw_ep 3rx, max 512
  87. [ 111.422271] musb_hdrc: hw_ep 4tx, max 512
  88. [ 111.422271] musb_hdrc: hw_ep 4rx, max 512
  89. [ 111.422271] musb_hdrc: hw_ep 5tx, max 16
  90. [ 111.422302] musb_hdrc: hw_ep 5rx, max 512
  91. [ 111.422302] musb_hdrc: hw_ep 6tx, max 512
  92. [ 111.422332] musb_hdrc: hw_ep 6rx, max 512
  93. [ 111.422332] musb_hdrc: hw_ep 7tx, max 16
  94. [ 111.422332] musb_hdrc: hw_ep 7rx, max 512
  95. [ 111.422363] musb_hdrc: hw_ep 8tx, max 512
  96. [ 111.422363] musb_hdrc: hw_ep 8rx, max 512
  97. [ 111.422393] musb_hdrc: hw_ep 9tx, max 512
  98. [ 111.422393] musb_hdrc: hw_ep 9rx, max 512
  99. [ 111.422393] musb_hdrc: hw_ep 10tx, max 512
  100. [ 111.422424] musb_hdrc: hw_ep 11tx, max 512
  101. [ 111.422454] musb_hdrc: USB OTG mode controller at d80ab000 using DMA, IRQ 92
  102. [ 111.422607] Registered /proc/driver/musb_hdrc
  103. [ 111.422668] rx51_set_wallcharger (connected = 0)
  104. [ 111.445861] NET: Registered protocol family 2
  105. [ 111.452514] Switched to high resolution mode on CPU 0
  106. [ 111.515136] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  107. [ 111.515502] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  108. [ 111.515808] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  109. [ 111.516021] TCP: Hash tables configured (established 8192 bind 8192)
  110. [ 111.516082] TCP reno registered
  111. [ 111.538604] NET: Registered protocol family 1
  112. [ 111.560485] VFS: Disk quotas dquot_6.5.1
  113. [ 111.560607] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  114. [ 111.562225] msgmni has been set to 459
  115. [ 111.562805] lowmem: Module initialized.
  116. [ 111.571380] alg: No test for lzo999 (lzo999-generic)
  117. [ 111.571624] alg: No test for stdrng (krng)
  118. [ 111.571746] io scheduler noop registered
  119. [ 111.572204] io scheduler cfq registered (default)
  120. [ 111.572601] OMAP DSS rev 2.0
  121. [ 111.572723] OMAP DISPC rev 3.0
  122. [ 111.572784] OMAP VENC rev 2
  123. [ 111.580871] OMAP3 ROM RNG: initializing
  124. [ 111.583068] Serial: 8250/16550 driver4 ports, IRQ sharing disabled
  125. [ 111.589752] brd: module loaded
  126. [ 111.592163] loop: module loaded
  127. [ 111.592254] i2c /dev entries driver
  128. [ 111.593505] input: triton2-pwrbutton as /class/input/input0
  129. [ 111.624420] triton2 power button driver initialized
  130. [ 111.625000] OneNAND driver initializing
  131. [ 111.626251] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base d0880000
  132. [ 111.626342] OneNAND Manufacturer: Samsung (0xec)
  133. [ 111.626373] Muxed OneNAND 256MB 1.8V 16-bit (0x40)
  134. [ 111.626403] OneNAND version = 0x0121
  135. [ 111.626434] Chip support all block unlock
  136. [ 111.626434] Chip has 2 plane
  137. [ 111.627960] Scanning device for bad blocks
  138. [ 111.651672] onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400
  139. [ 111.651702] Bad eraseblock 415 at 0x033e0000
  140. [ 111.744476] Creating 6 MTD partitions on "omap2-onenand":
  141. [ 111.744506] 0x00000000-0x00020000 : "bootloader"
  142. [ 111.744903] 0x00020000-0x00080000 : "config"
  143. [ 111.745147] 0x00080000-0x000c0000 : "log"
  144. [ 111.747650] mtdoops: Ready 53, 54 (no erase)
  145. [ 111.747650] mtdoops: Attached to MTD device 2
  146. [ 111.747711] 0x000c0000-0x002c0000 : "kernel"
  147. [ 111.747955] 0x002c0000-0x004c0000 : "initfs"
  148. [ 111.748229] 0x004c0000-0x10000000 : "rootfs"
  149. [ 111.750122] UBI: attaching mtd5 to ubi0
  150. [ 111.750152] UBI: physical eraseblock size: 131072 bytes (128 KiB)
  151. [ 111.750183] UBI: logical eraseblock size: 129024 bytes
  152. [ 111.750213] UBI: smallest flash I/O unit: 2048
  153. [ 111.750244] UBI: sub-page size: 512
  154. [ 111.750274] UBI: VID header offset: 512 (aligned 512)
  155. [ 111.750305] UBI: data offset: 2048
  156. [ 111.882293] UBI: attached mtd5 to ubi0
  157. [ 111.882354] UBI: MTD device name: "rootfs"
  158. [ 111.882385] UBI: MTD device size: 251 MiB
  159. [ 111.882415] UBI: number of good PEBs: 2009
  160. [ 111.882446] UBI: number of bad PEBs: 1
  161. [ 111.882476] UBI: max. allowed volumes: 128
  162. [ 111.882507] UBI: wear-leveling threshold: 4096
  163. [ 111.882537] UBI: number of internal volumes: 1
  164. [ 111.882568] UBI: number of user volumes: 1
  165. [ 111.882598] UBI: available PEBs: 0
  166. [ 111.882629] UBI: total number of reserved PEBs: 2009
  167. [ 111.882659] UBI: number of PEBs reserved for bad PEB handling: 20
  168. [ 111.882690] UBI: max/mean erase counter: 146/53
  169. [ 111.882720] UBI: image sequence number: 7
  170. [ 111.883178] usbcore: registered new interface driver libusual
  171. [ 111.883270] UBI: background thread "ubi_bgt0d" started, PID 26
  172. [ 111.906219] input: omap_twl4030keypad as /class/input/input1
  173. [ 111.954864] cpuidle: using governor ladder
  174. [ 111.954925] cpuidle: using governor menu
  175. [ 111.955108] Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
  176. [ 111.955383] ASoC version 0.13.2
  177. [ 111.968872] AIC3X Audio Codec 0.2
  178. [ 111.971435] asoc: tlv320aic3x <-> omap-mcbsp-dai-0 mapping ok
  179. [ 111.972930] asoc: Bluetooth codec <-> omap-mcbsp-dai-1 mapping ok
  180. [ 112.024475] input: RX51 (tlv320aic3x) Jack as /class/input/input2
  181. [ 112.048889] ALSA device list:
  182. [ 112.048919] #0: RX51 (tlv320aic3x)
  183. [ 112.049163] TCP cubic registered
  184. [ 112.049194] Initializing XFRM netlink socket
  185. [ 112.049285] NET: Registered protocol family 17
  186. [ 112.049346] NET: Registered protocol family 15
  187. [ 112.049377] ThumbEE CPU extension supported.
  188. [ 112.049438] Power Management for TI OMAP3.
  189. [ 112.052825] pm_dbg_init()
  190. [ 112.053710] SmartReflex driver initialized
  191. [ 112.059936] Disabling unused clock "gpt2_ick"
  192. [ 112.060028] Disabling unused clock "gpt3_ick"
  193. [ 112.060058] Disabling unused clock "gpt4_ick"
  194. [ 112.060089] Disabling unused clock "gpt5_ick"
  195. [ 112.060119] Disabling unused clock "gpt6_ick"
  196. [ 112.060150] Disabling unused clock "gpt7_ick"
  197. [ 112.060180] Disabling unused clock "gpt8_ick"
  198. [ 112.060241] Disabling unused clock "gpt9_ick"
  199. [ 112.060272] Disabling unused clock "uart3_ick"
  200. [ 112.060302] Disabling unused clock "gpio2_dbck"
  201. [ 112.060333] Disabling unused clock "gpio3_dbck"
  202. [ 112.060363] Disabling unused clock "gpio4_dbck"
  203. [ 112.060394] Disabling unused clock "gpio5_dbck"
  204. [ 112.060455] Disabling unused clock "gpio6_dbck"
  205. [ 112.060485] Disabling unused clock "gpt9_fck"
  206. [ 112.060516] Disabling unused clock "gpt8_fck"
  207. [ 112.060546] Disabling unused clock "gpt7_fck"
  208. [ 112.060577] Disabling unused clock "gpt6_fck"
  209. [ 112.060607] Disabling unused clock "gpt5_fck"
  210. [ 112.060638] Disabling unused clock "gpt4_fck"
  211. [ 112.060668] Disabling unused clock "gpt3_fck"
  212. [ 112.060729] Disabling unused clock "gpt2_fck"
  213. [ 112.060760] Disabling unused clock "uart3_fck"
  214. [ 112.060791] Disabling unused clock "wdt2_ick"
  215. [ 112.060821] Disabling unused clock "wdt2_fck"
  216. [ 112.060852] Disabling unused clock "gpio1_dbck"
  217. [ 112.060913] Disabling unused clock "rng_ick"
  218. [ 112.060943] Disabling unused clock "ssi_ick"
  219. [ 112.060974] Disabling unused clock "gpt10_ick"
  220. [ 112.061004] Disabling unused clock "gpt11_ick"
  221. [ 112.061065] Disabling unused clock "uart1_ick"
  222. [ 112.061096] Disabling unused clock "uart2_ick"
  223. [ 112.061126] Disabling unused clock "usbtll_ick"
  224. [ 112.061187] Disabling unused clock "ssi_ssr_fck"
  225. [ 112.061218] Disabling unused clock "uart1_fck"
  226. [ 112.061248] Disabling unused clock "uart2_fck"
  227. [ 112.061309] Disabling unused clock "usbtll_fck"
  228. [ 112.061340] Disabling unused clock "ts_fck"
  229. [ 112.061401] Disabling unused clock "cpefuse_fck"
  230. [ 112.061431] Disabling unused clock "gpt11_fck"
  231. [ 112.061462] Disabling unused clock "gpt10_fck"
  232. [ 112.061492] Disabling unused clock "dpll5_ck"
  233. [ 112.061553] Disabling unused clock "dpll4_m6x2_ck"
  234. [ 112.061614] Disabling unused clock "dpll4_m5x2_ck"
  235. [ 112.061645] Disabling unused clock "dpll3_m3x2_ck"
  236. [ 112.062103] Bootup reason: sw_rst
  237. [ 112.062194] OMAP GPIO switch handler initializing
  238. [ 112.064819] slide (GPIO 71) is now closed
  239. [ 112.064880] proximity (GPIO 89) is now open
  240. [ 112.064910] kb_lock (GPIO 113) is now open
  241. [ 112.064941] headphone (GPIO 177) is now disconnected
  242. [ 112.064971] cam_shutter (GPIO 110) is now closed
  243. [ 112.065002] cam_launch (GPIO 69) is now inactive
  244. [ 112.065032] cam_focus (GPIO 68) is now inactive
  245. [ 112.065063] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
  246. [ 112.065734] registered taskstats version 1
  247. [ 112.085571] omapfb: acx565akm rev 8d LCD detected
  248. [ 112.120269] tpa6130a2 2-0060: Headphone amplifier initialized successfully
  249. [ 112.140625] UBIFS: recovery needed
  250. [ 112.172332] UBIFS: recovery completed
  251. [ 112.172393] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
  252. [ 112.172454] UBIFS: file system size: 254693376 bytes (248724 KiB, 242 MiB, 1974 LEBs)
  253. [ 112.172515] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
  254. [ 112.172546] UBIFS: media format: 4 (latest is 4)
  255. [ 112.172576] UBIFS: default compressor: lzo
  256. [ 112.172607] UBIFS: reserved for root: 4384586 bytes (4281 KiB)
  257. [ 112.173095] VFS: Mounted root (ubifs filesystem).
  258. [ 112.173309] Freeing init memory: 148K
  259. [ 114.929473] tsl2563 2-0029: model 7, rev. 0
  260. [ 115.007507] Registered led device: twl4030:vibrator
  261. [ 115.059356] lp5523 2-0032: LP5523 Programmable led chip found
  262. [ 115.114227] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
  263. [ 115.114410] Linux video capture interface: v2.00
  264. [ 115.238372] I2C driver for Si4713 FM Radio Transmitter
  265. [ 115.494506] isp_mod: disagrees about version of symbol struct_module
  266. [ 115.715026] isp_mod: Unknown symbol iommu_restore_ctx
  267. [ 115.715454] isp_mod: Unknown symbol iommu_vfree
  268. [ 115.716156] isp_mod: Unknown symbol iommu_put
  269. [ 115.716674] isp_mod: Unknown symbol iommu_save_ctx
  270. [ 115.717102] isp_mod: Unknown symbol iommu_vunmap
  271. [ 115.717620] isp_mod: Unknown symbol iommu_vmalloc
  272. [ 115.735504] isp_mod: Unknown symbol iommu_get
  273. [ 115.736206] isp_mod: Unknown symbol iommu_kmap
  274. [ 115.736724] isp_mod: Unknown symbol da_to_va
  275. [ 115.737274] isp_mod: Unknown symbol iommu_vmap
  276. [ 115.737640] isp_mod: Unknown symbol iommu_kunmap
  277. [ 115.738006] isp_mod: Unknown symbol videobuf_to_dma
  278. [ 116.054199] i2c_omap i2c_omap.2: controller timed out
  279. [ 116.111328] lp5523 2-0032: got interrupt from led chip
  280. [ 116.111877] lp5523 2-0032: interrupt from led chip 4f
  281. [ 116.111907] lp5523 2-0032: all engines configured
  282. [ 116.111938] lp5523 2-0032: disabling engines
  283. [ 116.112548] Registered led device: lp5523:kb1
  284. [ 116.112701] Registered led device: lp5523:kb2
  285. [ 116.112854] Registered led device: lp5523:kb3
  286. [ 116.113006] Registered led device: lp5523:kb4
  287. [ 116.113159] Registered led device: lp5523:b
  288. [ 116.113281] Registered led device: lp5523:g
  289. [ 116.113433] Registered led device: lp5523:r
  290. [ 116.113586] Registered led device: lp5523:kb5
  291. [ 116.113708] Registered led device: lp5523:kb6
  292. [ 116.196075] radio-si4713 2-0063: Detected Si4713 (0x0d) Firmware: 3.0 Patch ID: 00:00 Component: 3.0 Chip Rev.: unknown
  293. [ 116.585327] TSC2005 driver initializing
  294. [ 116.586059] input: TSC2005 touchscreen as /class/input/input3
  295. [ 116.639617] Bluetooth: Core ver 2.15
  296. [ 116.648895] NET: Registered protocol family 31
  297. [ 116.648956] Bluetooth: HCI device and connection manager initialized
  298. [ 116.648986] Bluetooth: HCI socket layer initialized
  299. [ 116.687286] cfg80211: Using static regulatory domain info
  300. [ 116.687286] cfg80211: Regulatory domain: US
  301. [ 116.687316] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  302. [ 116.687316] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  303. [ 116.687347] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  304. [ 116.687347] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  305. [ 116.687377] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  306. [ 116.687377] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  307. [ 116.687408] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
  308. [ 116.687438] cfg80211: Regulatory domain changed to country: US
  309. [ 116.687438] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  310. [ 116.687469] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  311. [ 116.687469] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  312. [ 116.687500] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  313. [ 116.687500] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  314. [ 116.687530] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  315. [ 116.687530] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
  316. [ 116.814147] hci_h4p hci_h4p: Registering HCI H4P device
  317. [ 116.968322] nokia-av nokia-av: accessory detect module initialized
  318. [ 117.163024] omap_wdt omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec, nowayout is on
  319. [ 117.186981] SSI DRIVER Version 1.1-rc2
  320. [ 117.192718] omap_ssi omap_ssi: SSI Hardware REVISION 1.0
  321. [ 117.262359] smc91x: not found (-19).
  322. [ 117.513000] mmci-omap-hs mmci-omap-hs.0: Failed to get debounce clock
  323. [ 117.513183] mmc0: cover is open, card is now inaccessible
  324. [ 117.558227] phy0: Selected rate control algorithm 'minstrel'
  325. [ 117.641021] CMT speech driver v0.2.0
  326. [ 117.648406] mmci-omap-hs mmci-omap-hs.1: Failed to get debounce clock
  327. [ 117.993133] wl1251: loaded
  328. [ 117.993835] wl1251: initialized
  329. [ 118.000976] NET: Registered protocol family 35
  330. [ 118.034942] SSI McSAAB PROTOCOL Version: 2.0-rc1
  331. [ 118.037658] McSAAB: ACWAKE DOWN
  332. [ 118.037750] McSAAB: ACWAKE UP
  333. [ 118.037811] McSAAB: WAKELINES TEST OK
  334. [ 118.068847] mmc1: new high speed MMC card at address 0001
  335. [ 118.071655] mmcblk0: mmc1:0001 MMC32G 29.8 GiB
  336. [ 118.071990] mmcblk0: p1 p2 p3
  337. [ 118.328063] dspbridge_init: 600000 bytes @ 80e00000
  338. [ 118.472290] omap-iommu omap-iommu.1: isp registered
  339. [ 118.691497] isp_mod: disagrees about version of symbol struct_module
  340. [ 118.778839] omap-iommu omap-iommu.1: isp: version 1.1
  341. [ 119.002716] smia-sensor 2-0010: firmware: requesting smia-sensor-01-022b-04.bin
  342. [ 119.025054] smia_reglist_import: meta_reglist version 2009-07-27
  343. [ 119.025115] smia_reglist_import: type 10 w 648 h 488 fmt 30314142 ival 100/1502 ptr d0d422a0
  344. [ 119.025146] smia_reglist_import: type 10 w 648 h 488 fmt 30314142 ival 100/3003 ptr d0d42228
  345. [ 119.025177] smia_reglist_import: type 1 w 0 h 0 fmt 30314142 ival 100/0 ptr d0d42090
  346. [ 119.025177] smia_reglist_import: type 0 w 0 h 0 fmt 30314142 ival 100/0 ptr d0d42038
  347. [ 119.039947] et8ek8 3-003e: firmware: requesting et8ek8-0002.bin
  348. [ 119.062103] smia_reglist_import: meta_reglist version V4 alma 10.10.10
  349. [ 119.062194] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314142 ival 100/399 ptr d0d45464
  350. [ 119.062225] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314442 ival 100/1292 ptr d0d45204
  351. [ 119.062225] smia_reglist_import: type 10 w 1728 h 1312 fmt 30314142 ival 100/11792 ptr d0d45884
  352. [ 119.062255] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/13000 ptr d0d457ec
  353. [ 119.062286] smia_reglist_import: type 10 w 1296 h 984 fmt 30314142 ival 100/501 ptr d0d4558c
  354. [ 119.062286] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/3000 ptr d0d4529c
  355. [ 119.062316] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/2500 ptr d0d45624
  356. [ 119.062316] smia_reglist_import: type 10 w 864 h 656 fmt 30314142 ival 100/13584 ptr d0d45754
  357. [ 119.062347] smia_reglist_import: type 10 w 864 h 656 fmt 30314142 ival 100/2988 ptr d0d45334
  358. [ 119.062377] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/499 ptr d0d454f4
  359. [ 119.062377] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/14779 ptr d0d456bc
  360. [ 119.062408] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/2993 ptr d0d453cc
  361. [ 119.062438] smia_reglist_import: type 1 w 2592 h 1968 fmt 30314142 ival 100/1207 ptr d0d4505c
  362. [ 119.882293] g_file_storage gadget: File-backed Storage Gadget, version: 7 August 2007
  363. [ 119.882354] g_file_storage gadget: Number of LUNs=2 Number of buffers=16
  364. [ 119.882415] musb_hdrc musb_hdrc: MUSB HDRC host driver
  365. [ 119.884307] drivers/usb/core/inode.c: creating file 'devices'
  366. [ 119.884338] drivers/usb/core/inode.c: creating file '001'
  367. [ 119.886291] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
  368. [ 119.886474] usb usb1: default language 0x0409
  369. [ 119.886810] usb usb1: uevent
  370. [ 119.888580] usb usb1: usb_probe_device
  371. [ 119.888610] usb usb1: configuration #1 chosen from 1 choice
  372. [ 119.888702] usb usb1: adding 1-0:1.0 (config #1, interface 0)
  373. [ 119.888854] usb 1-0:1.0: uevent
  374. [ 119.888946] hub 1-0:1.0: usb_probe_interface
  375. [ 119.888946] hub 1-0:1.0: usb_probe_interface - got id
  376. [ 119.888946] hub 1-0:1.0: USB hub found
  377. [ 119.889068] hub 1-0:1.0: 1 port detected
  378. [ 119.889099] hub 1-0:1.0: standalone hub
  379. [ 119.889099] hub 1-0:1.0: individual port power switching
  380. [ 119.889129] hub 1-0:1.0: no over-current protection
  381. [ 119.889129] hub 1-0:1.0: power on to power good time: 10ms
  382. [ 119.889160] hub 1-0:1.0: local power source is good
  383. [ 119.889160] hub 1-0:1.0: enabling power on all ports
  384. [ 119.889587] drivers/usb/core/inode.c: creating file '001'
  385. [ 119.889892] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  386. [ 119.889923] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  387. [ 119.889953] usb usb1: Product: MUSB HDRC host driver
  388. [ 119.890075] usb usb1: Manufacturer: Linux 2.6.28.10-power51 musb-hcd
  389. [ 119.890106] usb usb1: SerialNumber: musb_hdrc
  390. [ 119.976837] twl4030_usb twl4030_usb: HW_CONDITIONS 0xd0/208; link 2
  391. [ 119.976867] rx51_set_charger (connected = 1)
  392. [ 119.976928] rx51_update_charger_mode (mode = 1)
  393. [ 119.976959] rx51 - schedule delayed work in 2 seconds - rx51_detect_wallcharger
  394. [ 119.983947] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
  395. [ 120.101440] twl4030_usb twl4030_usb: HW_CONDITIONS 0x50/80; link 1
  396. [ 120.101470] rx51_set_charger (connected = 0)
  397. [ 120.101531] rx51_update_charger_mode (mode = 0)
  398. [ 120.102294] rx51_set_wallcharger (connected = 0)
  399. [ 120.213806] musb_charger_detect (enabled = 1)
  400. [ 120.537384] NET: Registered protocol family 10
  401. [ 120.538116] lo: Disabled Privacy Extensions
  402. [ 121.976043] rx51_detect_wallcharger (the_musb = cf0a80f0)
  403. [ 121.976135] musb_charger_detect (enabled = 1)
  404. [ 122.176635] hub 1-0:1.0: hub_suspend
  405. [ 122.176666] usb usb1: bus auto-suspend
  406. [ 122.658569] Adding 786424k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:786424k
  407. [ 123.010009] omap mailbox rev 4.0
  408. [ 123.054626] DSP Bridge driver loaded
  409. [ 124.774597] kjournald starting. Commit interval 1 seconds
  410. [ 124.785034] EXT3 FS on mmcblk0p2, internal journal
  411. [ 124.785064] EXT3-fs: recovery complete.
  412. [ 124.789306] EXT3-fs: mounted filesystem with writeback data mode.
  413. [ 129.041931] Bluetooth: L2CAP ver 2.13
  414. [ 129.041961] Bluetooth: L2CAP socket layer initialized
  415. [ 129.225250] Bluetooth: SCO (Voice Link) ver 0.6
  416. [ 129.225280] Bluetooth: SCO socket layer initialized
  417. [ 129.254699] hci_h4p hci_h4p: firmware: requesting bcmfw.bin
  418. [ 129.537902] hci_h4p hci_h4p: Valid bluetooth address not found.
  419. [ 129.537994] hci_h4p hci_h4p: FW error
  420. [ 129.537994] hci_h4p hci_h4p: Sending firmware failed.
  421. [ 133.095489] misc iphb: Module registered in 2.6.28.10-power51, built Jul 23 2012 16:42:27
  422. [ 142.403137] procwrap_detach: deprecated dspbridge ioctl
  423. [ 151.171661] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  424. [ 158.767852] cfg80211: Regulatory domain changed to country: US
  425. [ 158.767883] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  426. [ 158.767913] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  427. [ 158.767944] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  428. [ 158.767944] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  429. [ 158.767974] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  430. [ 158.767974] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  431. [ 158.768005] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
  432. [ 158.809967] Bluetooth: RFCOMM socket layer initialized
  433. [ 158.810058] Bluetooth: RFCOMM TTY layer initialized
  434. [ 158.810058] Bluetooth: RFCOMM ver 1.11
  435. [ 161.025634] SCSI subsystem initialized
  436. [ 161.408599] Driver 'sd' needs updating - please use bus_type methods
  437. [ 167.413604] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  438. [ 177.304138] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  439. [ 182.163543] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  440. [ 182.788513] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  441. [ 189.194854] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  442. [ 191.046539] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  443. [ 191.671630] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  444. [ 193.741699] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  445. [ 194.680145] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  446. [ 196.249633] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  447. [ 197.187072] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  448. [ 198.609039] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  449. [ 199.546508] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  450. [ 201.382568] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  451. [ 202.007446] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  452. [ 202.944946] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  453. [ 204.116882] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  454. [ 225.148040] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  455. [ 226.663757] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  456. [ 227.601196] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  457. [ 228.819915] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  458. [ 229.601196] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  459. [ 231.562042] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  460. [ 232.343383] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  461. [ 234.124633] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  462. [ 235.062072] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  463. [ 242.249664] slide (GPIO 71) is now open
  464. [ 242.460540] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  465. [ 245.132446] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  466. [ 246.069824] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  467. [ 247.007293] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  468. [ 264.148712] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  469. [ 264.773254] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  470. [ 287.694732] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  471. [ 288.319732] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  472. [ 297.718261] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  473. [ 306.921325] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  474. [ 307.546386] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  475. [ 310.046295] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  476. [ 310.671295] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  477. [ 313.999542] slide (GPIO 71) is now closed
  478. [ 316.679229] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  479. [ 319.890045] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  480. [ 320.515106] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  481. [ 323.015106] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  482. [ 323.640075] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  483. [ 334.366638] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  484. [ 334.991638] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  485. [ 341.733856] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  486. [ 342.358795] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  487. [ 393.233764] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  488. [ 393.858764] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  489. [ 396.522857] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  490. [ 397.147827] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  491. [ 405.265045] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  492. [ 405.890014] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  493. [ 414.632202] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  494. [ 418.483856] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  495. [ 419.108795] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  496. [ 424.280853] slide (GPIO 71) is now open
  497. [ 443.397857] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  498. [ 444.022857] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  499. [ 466.921325] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  500. [ 467.546295] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  501. [ 470.694885] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  502. [ 480.819732] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  503. [ 481.444702] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  504. [ 485.234100] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  505. [ 485.858978] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  506. [ 536.890075] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  507. [ 537.515045] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  508. [ 541.405670] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  509. [ 546.671264] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  510. [ 549.202575] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  511. [ 549.827514] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  512. [ 554.780639] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  513. [ 564.046325] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  514. [ 570.202545] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  515. [ 576.999450] slide (GPIO 71) is now closed
  516. [ 580.202514] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  517. [ 584.491638] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  518. [ 585.116729] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  519. [ 590.390075] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  520. [ 594.351013] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  521. [ 594.975982] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  522. [ 600.890136] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  523. [ 601.827636] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  524. [ 603.976104] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  525. [ 604.601104] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  526. [ 606.077941] wl12xx spi4.0: firmware: requesting wl1251-fw.bin
  527. [ 606.820007] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
  528. [ 606.835571] wl1251: firmware booted (Rev 4.0.4.3.7)
  529. [ 606.953338] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  530. [ 607.530914] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  531. [ 608.070159] wl1251: down
  532. [ 608.155853] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  533. [ 610.194915] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
  534. [ 610.210632] wl1251: firmware booted (Rev 4.0.4.3.7)
  535. [ 610.328247] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  536. [ 611.070007] wlan0: authenticate with AP c8:3a:35:00:50:71
  537. [ 611.073394] wlan0: authenticated
  538. [ 611.073425] wlan0: associate with AP c8:3a:35:00:50:71
  539. [ 611.076629] wlan0: RX AssocResp from c8:3a:35:00:50:71 (capab=0x411 status=0 aid=4)
  540. [ 611.076660] wlan0: associated
  541. [ 611.265747] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  542. [ 613.874511] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  543. [ 614.812133] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  544. [ 615.554290] wlan0: roaming signal from driver, sending LOWSIGNAL
  545. [ 615.749572] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  546. [ 617.140441] slide (GPIO 71) is now open
  547. [ 621.663543] wlan0: no IPv6 routers present
  548. [ 627.936920] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  549. [ 628.561950] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  550. [ 634.804290] slide (GPIO 71) is now closed
  551. [ 636.632293] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  552. [ 637.257476] HWRecoveryResetSGX: SGX Hardware Recovery triggered
  553. [ 641.157836] wlan0: roaming signal from driver, sending HIGHSIGNAL
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!