API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Oct 28th, 2013
201
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 34.48 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2013.04-07297-gc8f265c-dirty (Jun 23 2013 - 14:31:49)
  2. Board: Cubieboard2
  3. DRAM: 1024MB
  4. CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
  5. SUNXI SD/MMC: 0
  6.  
  7.  
  8. U-Boot 2013.04-07297-gc8f265c-dirty (Jun 23 2013 - 14:31:49) Allwinner Technoloy
  9.  
  10. CPU: Allwinner A20 (SUN7I)
  11. Board: Cubieboard2
  12. I2C: ready
  13. DRAM: 1 GiB
  14. MMC: SUNXI SD/MMC: 0
  15. *** Warning - bad CRC, using default environment
  16.  
  17. In: serial
  18. Out: serial
  19. Err: serial
  20. Net: emac
  21. Hit any key to stop autoboot: 0
  22. reading uEnv.txt
  23. 274 bytes read in 5 ms (52.7 KiB/s)
  24. Loaded environment from uEnv.txt
  25. reading boot.scr
  26. ** Unable to read file boot.scr **
  27. Failed to mount ext2 filesystem...
  28. ** Unrecognized filesystem type **
  29. Failed to mount ext2 filesystem...
  30. ** Unrecognized filesystem type **
  31. Failed to mount ext2 filesystem...
  32. ** Unrecognized filesystem type **
  33. reading script.bin
  34. 45088 bytes read in 9 ms (4.8 MiB/s)
  35. reading uImage
  36. 3887904 bytes read in 183 ms (20.3 MiB/s)
  37. ## Booting kernel from Legacy Image at 48000000 ...
  38. Image Name:
  39. Created: 2013-09-18 10:17:20 UTC
  40. Image Type: ARM Linux Kernel Image (uncompressed)
  41. Data Size: 3887840 Bytes = 3.7 MiB
  42. Load Address: 40008000
  43. Entry Point: 40008000
  44. Verifying Checksum ... OK
  45. Loading Kernel Image ... OK
  46. OK
  47.  
  48. Starting kernel ...
  49.  
  50. [ 0.000000] Booting Linux on physical CPU 0
  51. [ 0.000000] Initializing cgroup subsys cpuset
  52. [ 0.000000] Initializing cgroup subsys cpu
  53. [ 0.000000] Linux version 3.3.0 (rolivo@build) (gcc version 4.6.3 20120201 (3
  54. [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c53c7d
  55. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie
  56. [ 0.000000] Machine: sun7i
  57. [ 0.000000] [sun7i_fixup]: From boot, get meminfo:
  58. [ 0.000000] Start: 0x40000000
  59. [ 0.000000] Size: 1024MB
  60. [ 0.000000] memory reserved(in bytes):
  61. [ 0.000000] : 0x43000000, 0x00010000
  62. [ 0.000000] : 0x52000000, 0x00020000
  63. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  64. [ 0.000000] On node 0 totalpages: 216064
  65. [ 0.000000] free_area_init_node: node 0, pgdat c077dc00, node_mem_map d000000
  66. [ 0.000000] DMA zone: 576 pages used for memmap
  67. [ 0.000000] DMA zone: 0 pages reserved
  68. [ 0.000000] DMA zone: 64960 pages, LIFO batch:15
  69. [ 0.000000] Normal zone: 1134 pages used for memmap
  70. [ 0.000000] Normal zone: 81810 pages, LIFO batch:15
  71. [ 0.000000] HighMem zone: 594 pages used for memmap
  72. [ 0.000000] HighMem zone: 66990 pages, LIFO batch:15
  73. [ 0.000000] [scu_get_core_count] cores=1800001
  74. [ 0.000000] sun7i_init_early: enter
  75. [ 0.000000] PERCPU: Embedded 7 pages/cpu @d0908000 s5504 r8192 d14976 u32768
  76. [ 0.000000] pcpu-alloc: s5504 r8192 d14976 u32768 alloc=8*4096
  77. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  78. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa0
  79. [ 0.000000] Kernel command line: console=ttyS0,115200 root= loglevel=8 panic9
  80. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  81. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  82. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  83. [ 0.000000] Memory: 64MB 780MB = 844MB total
  84. [ 0.000000] Memory: 844956k/844956k available, 203620k reserved, 270336K higm
  85. [ 0.000000] Virtual kernel memory layout:
  86. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  87. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  88. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  89. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  90. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  91. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  92. [ 0.000000] .text : 0xc0008000 - 0xc06fd7ac (7126 kB)
  93. [ 0.000000] .init : 0xc06fe000 - 0xc072f580 ( 198 kB)
  94. [ 0.000000] .data : 0xc0730000 - 0xc077eb20 ( 315 kB)
  95. [ 0.000000] .bss : 0xc077eb44 - 0xc08c9cf8 (1325 kB)
  96. [ 0.000000] Preemptible hierarchical RCU implementation.
  97. [ 0.000000] NR_IRQS:160
  98. [ 0.000000] aw_clkevt_init: timer base 0xf000cc00
  99. [ 0.000000] [aw_delay]: It is use use_time_delay function!
  100. [ 0.000000] aw_clksrc_init(96)
  101. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 1789s
  102. [ 0.000000] aw_clksrc_init(120)
  103. [ 0.000000] Architected local timer running at 24.00MHz.
  104. [ 0.000000] Console: colour dummy device 80x30
  105. [ 0.000470] Calibrating delay loop... 1908.73 BogoMIPS (lpj=9543680)
  106. [ 0.059998] pid_max: default: 32768 minimum: 301
  107. [ 0.060381] Mount-cache hash table entries: 512
  108. [ 0.061062] CPU: Testing write buffer coherency: ok
  109. [ 0.061365] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  110. [ 0.061457] Setting up static identity map for 0x404f8b80 - 0x404f8bd8
  111. [ 0.174295] CPU1: Booted secondary processor
  112. [ 0.231655] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  113. [ 0.231752] Brought up 2 CPUs
  114. [ 0.231763] SMP: Total of 2 processors activated (3824.02 BogoMIPS).
  115. [ 0.232654] devtmpfs: initialized
  116. [ 0.236745] script_init enter!
  117. [ 0.237589] script_init exit!
  118. [ 0.238277] kworker/u:0 used greatest stack depth: 6576 bytes left
  119. [ 0.239333] print_constraints: dummy:
  120. [ 0.239997] NET: Registered protocol family 16
  121. [ 0.240299] sunxi_dump_init success
  122. [ 0.241767] kworker/u:0 used greatest stack depth: 6120 bytes left
  123. [ 0.242188] sun7i_init: enter
  124. [ 0.242778] [ccu-inf] aw clock manager init
  125. [ 0.242789] [ccu-inf] aw_ccu_init
  126. [ 0.242990] [ccu-inf] script config pll3 to 297MHz
  127. [ 0.243003] [ccu-inf] script config pll4 to 300MHz
  128. [ 0.243015] [ccu-inf] script config pll6 to 600MHz
  129. [ 0.243026] [ccu-inf] script config pll7 to 297MHz
  130. [ 0.243036] [ccu-inf] script config pll8 to 336MHz
  131. [ 0.243641] axp config [pmu_para] [pmu_used] : 1
  132. [ 0.243653] axp config [pmu_para] [pmu_twi_id] : 0
  133. [ 0.243662] axp config [pmu_para] [pmu_irq_id] : 32
  134. [ 0.243672] axp config [pmu_para] [pmu_twi_addr] : 52
  135. [ 0.243681] axp config [pmu_para] [pmu_battery_rdc] : 120
  136. [ 0.243690] axp config [pmu_para] [pmu_battery_cap] : 2100
  137. [ 0.243700] axp config [pmu_para] [pmu_init_chgcur] : 300
  138. [ 0.243710] axp config [pmu_para] [pmu_suspend_chgcur] : 1000
  139. [ 0.243720] axp config [pmu_para] [pmu_resume_chgcur] : 300
  140. [ 0.243731] axp config [pmu_para] [pmu_shutdown_chgcur] : 1000
  141. [ 0.243740] axp config [pmu_para] [pmu_init_chgvol] : 4200
  142. [ 0.243750] axp config [pmu_para] [pmu_init_chgend_rate] : 15
  143. [ 0.243760] axp config [pmu_para] [pmu_init_chg_enabled] : 1
  144. [ 0.243770] axp config [pmu_para] [pmu_init_adc_freq] : 100
  145. [ 0.243780] axp config [pmu_para] [pmu_init_adc_freqc] : 100
  146. [ 0.243790] axp config [pmu_para] [pmu_init_chg_pretime] : 50
  147. [ 0.243800] axp config [pmu_para] [pmu_init_chg_csttime] : 720
  148. [ 0.243809] axp config [pmu_para] [pmu_bat_para1] : 0
  149. [ 0.243819] axp config [pmu_para] [pmu_bat_para2] : 0
  150. [ 0.243828] axp config [pmu_para] [pmu_bat_para3] : 0
  151. [ 0.243837] axp config [pmu_para] [pmu_bat_para4] : 0
  152. [ 0.243847] axp config [pmu_para] [pmu_bat_para5] : 5
  153. [ 0.243856] axp config [pmu_para] [pmu_bat_para6] : 11
  154. [ 0.243866] axp config [pmu_para] [pmu_bat_para7] : 13
  155. [ 0.243875] axp config [pmu_para] [pmu_bat_para8] : 15
  156. [ 0.243886] axp config [pmu_para] [pmu_bat_para9] : 19
  157. [ 0.243896] axp config [pmu_para] [pmu_bat_para10] : 32
  158. [ 0.243906] axp config [pmu_para] [pmu_bat_para11] : 50
  159. [ 0.243915] axp config [pmu_para] [pmu_bat_para12] : 58
  160. [ 0.243925] axp config [pmu_para] [pmu_bat_para13] : 71
  161. [ 0.243934] axp config [pmu_para] [pmu_bat_para14] : 81
  162. [ 0.243944] axp config [pmu_para] [pmu_bat_para15] : 89
  163. [ 0.243953] axp config [pmu_para] [pmu_bat_para16] : 100
  164. [ 0.243963] axp config [pmu_para] [pmu_usbvol_limit] : 1
  165. [ 0.243973] axp config [pmu_para] [pmu_usbvol] : 4000
  166. [ 0.243982] axp config [pmu_para] [pmu_usbcur_limit] : 0
  167. [ 0.243992] axp config [pmu_para] [pmu_usbcur] : 0
  168. [ 0.244001] axp config [pmu_para] [pmu_pwroff_vol] : 3300
  169. [ 0.244011] axp config [pmu_para] [pmu_pwron_vol] : 2900
  170. [ 0.244021] axp config [target] [dcdc2_vol] : 1400
  171. [ 0.244029] axp config [target] [dcdc3_vol] : 1250
  172. [ 0.244038] axp config [target] [ldo2_vol] : 3000
  173. [ 0.244047] axp config [target] [ldo3_vol] : 2800
  174. [ 0.244055] axp config [target] [ldo4_vol] : 2800
  175. [ 0.244065] axp config [pmu_para] [pmu_pekoff_time] : 6000
  176. [ 0.244074] axp config [pmu_para] [pmu_pekoff_en] : 1
  177. [ 0.244084] axp config [pmu_para] [pmu_peklong_time] : 1500
  178. [ 0.244094] axp config [pmu_para] [pmu_pwrok_time] : 64
  179. [ 0.244104] axp config [pmu_para] [pmu_pwrnoe_time] : 2000
  180. [ 0.244113] axp config [pmu_para] [pmu_intotp_en] : 1
  181. [ 0.244123] axp config [pmu_para] [pmu_pekon_time] : 1000
  182. [ 0.244520] [gpio-inf] aw gpio init start
  183. [ 0.244546] [gpio-inf] gpio_clk_init: apb pio clk enable success
  184. [ 0.244780] gpiochip_add: registered GPIOs 0 to 17 on device: GPA
  185. [ 0.244983] gpiochip_add: registered GPIOs 24 to 47 on device: GPB
  186. [ 0.245159] gpiochip_add: registered GPIOs 54 to 78 on device: GPC
  187. [ 0.245340] gpiochip_add: registered GPIOs 85 to 112 on device: GPD
  188. [ 0.245507] gpiochip_add: registered GPIOs 119 to 130 on device: GPE
  189. [ 0.245726] gpiochip_add: registered GPIOs 137 to 142 on device: GPF
  190. [ 0.245951] gpiochip_add: registered GPIOs 149 to 160 on device: GPG
  191. [ 0.246137] gpiochip_add: registered GPIOs 167 to 194 on device: GPH
  192. [ 0.246312] gpiochip_add: registered GPIOs 201 to 222 on device: GPI
  193. [ 0.246721] [gpio-inf] aw gpio init done
  194. [ 0.291967] bio: create slab <bio-0> at 0
  195. [ 0.293991] SCSI subsystem initialized
  196. [ 0.294447] libata version 3.00 loaded.
  197. [ 0.295351] usbcore: registered new interface driver usbfs
  198. [ 0.295733] usbcore: registered new interface driver hub
  199. [ 0.296022] usbcore: registered new device driver usb
  200. [ 0.296706] [i2c3] fetch para from sysconfig failed
  201. [ 0.296717] [i2c4] fetch para from sysconfig failed
  202. [ 0.297940] -------------------------------------------
  203. [ 0.297951] axp_mfd_probe:axp20_mfd pmu probed !
  204. [ 0.297958] -------------------------------------------
  205. [ 0.300297] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  206. [ 0.300978] -------------------------------------------
  207. [ 0.300986] axp_mfd_probe:axp20_mfd pmu request_irq ok !
  208. [ 0.300993] -------------------------------------------
  209. [ 0.302879] [AXP]axp driver uning configuration failed(348)
  210. [ 0.302889] [AXP]power_start = 0
  211. [ 0.302919] I2C: i2c-0: sun7i I2C adapter
  212. [ 0.302926] **********start************
  213. [ 0.302933] 0x40
  214. [ 0.302938] 0xf8
  215. [ 0.302943] 0x58
  216. [ 0.302948] 0x0
  217. [ 0.302954] 0x0
  218. [ 0.302958] **********end************
  219. [ 0.303347] I2C: i2c-1: sun7i I2C adapter
  220. [ 0.303354] **********start************
  221. [ 0.303361] 0x40
  222. [ 0.303367] 0xf8
  223. [ 0.303372] 0x58
  224. [ 0.303377] 0x0
  225. [ 0.303382] 0x0
  226. [ 0.303387] **********end************
  227. [ 0.303707] I2C: i2c-2: sun7i I2C adapter
  228. [ 0.303715] **********start************
  229. [ 0.303722] 0x40
  230. [ 0.303727] 0xf8
  231. [ 0.303733] 0x28
  232. [ 0.303738] 0x0
  233. [ 0.303743] 0x0
  234. [ 0.303748] **********end************
  235. [ 0.304325] print_constraints: axp20_ldo1: 1300 mV
  236. [ 0.306035] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  237. [ 0.307679] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  238. [ 0.309564] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  239. [ 0.311238] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
  240. [ 0.314667] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
  241. [ 0.315916] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  242. [ 0.316784] gpiochip_add: registered GPIOs 229 to 233 on device: axp_pin
  243. [ 0.318034] Advanced Linux Sound Architecture Driver Version 1.0.24.
  244. [ 0.319218] Bluetooth: Core ver 2.16
  245. [ 0.319419] NET: Registered protocol family 31
  246. [ 0.319430] Bluetooth: HCI device and connection manager initialized
  247. [ 0.319448] Bluetooth: HCI socket layer initialized
  248. [ 0.319457] Bluetooth: L2CAP socket layer initialized
  249. [ 0.319485] Bluetooth: SCO socket layer initialized
  250. [ 0.320163] cfg80211: Calling CRDA to update world regulatory domain
  251. [ 0.320697] Switching to clocksource arch_sys_counter
  252. [ 0.321078] FS-Cache: Loaded
  253. [ 0.321436] CacheFiles: Loaded
  254. [ 0.343251] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  255. [ 0.343468] Line:1148:ohci_hcd_mod_init
  256. [ 0.343478] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  257. [ 0.343660] line = 483,usb_manager_init
  258. [ 0.343667] [usb_manager]: CONFIG_USB_SW_SUN7I_USB0_OTG
  259. [ 0.343690] WRN:L173(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  260. [ 0.343703] WRN:L182(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  261. [ 0.343718] WRN:L201(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  262. [ 0.343730] WRN:L212(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  263. [ 0.343744] WRN:L224(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  264. [ 0.343759] WRN:L244(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  265. [ 0.343772] WRN:L252(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  266. [ 0.344001] [sw_hcd0]: usb host driver initialize........
  267. [ 0.344335] [sw_udc]: udc_init: version 20080411
  268. [ 0.344393] [sw_udc]: usb_vbase = 0xf1c13000
  269. [ 0.344402] [sw_udc]: sram_vbase = 0xf1c00000
  270. [ 0.344442] [sw_udc]: open_usb_clock
  271. [ 0.364499] udc->driver is null, udc is need not stop
  272. [ 0.365456] NET: Registered protocol family 2
  273. [ 0.365912] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  274. [ 0.368189] TCP established hash table entries: 131072 (order: 8, 1048576 by)
  275. [ 0.371923] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  276. [ 0.372912] TCP: Hash tables configured (established 131072 bind 65536)
  277. [ 0.372925] TCP reno registered
  278. [ 0.372979] UDP hash table entries: 512 (order: 2, 16384 bytes)
  279. [ 0.373042] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  280. [ 0.373513] NET: Registered protocol family 1
  281. [ 0.374121] RPC: Registered named UNIX socket transport module.
  282. [ 0.374134] RPC: Registered udp transport module.
  283. [ 0.374141] RPC: Registered tcp transport module.
  284. [ 0.374149] RPC: Registered tcp NFSv4.1 backchannel transport module.
  285. [ 0.374438] sunxi_reg_init enter
  286. [ 0.375507] [pm]aw_pm_init!
  287. [ 0.375522] dram config [dram_para] [dram_baseaddr] : 1073741824
  288. [ 0.375534] dram config [dram_para] [dram_clk] : 480
  289. [ 0.375542] dram config [dram_para] [dram_type] : 3
  290. [ 0.375551] dram config [dram_para] [dram_rank_num] : -1
  291. [ 0.375560] dram config [dram_para] [dram_chip_density] : -1
  292. [ 0.375569] dram config [dram_para] [dram_io_width] : -1
  293. [ 0.375578] dram config [dram_para] [dram_bus_width] : -1
  294. [ 0.375587] dram config [dram_para] [dram_cas] : 9
  295. [ 0.375595] dram config [dram_para] [dram_zq] : 127
  296. [ 0.375606] dram config [dram_para] [dram_odt_en] : 0
  297. [ 0.375614] dram config [dram_para] [dram_size] : -1
  298. [ 0.375623] dram config [dram_para] [dram_tpr0] : 1121491383
  299. [ 0.375632] dram config [dram_para] [dram_tpr1] : 41104
  300. [ 0.375641] dram config [dram_para] [dram_tpr2] : 141824
  301. [ 0.375650] dram config [dram_para] [dram_tpr3] : 0
  302. [ 0.375658] dram config [dram_para] [dram_tpr4] : 1
  303. [ 0.375667] dram config [dram_para] [dram_tpr5] : 0
  304. [ 0.375675] dram config [dram_para] [dram_emr1] : 4
  305. [ 0.375684] dram config [dram_para] [dram_emr2] : 16
  306. [ 0.375692] dram config [dram_para] [dram_emr3] : 0
  307. [ 0.375702] standby_mode = 0.
  308. [ 0.375708] aw_pm_init: not support super standby.
  309. [ 0.375717] cpu0_en = 0.
  310. [ 0.375724] dram_selfresh_en = 1.
  311. [ 0.375732] wakeup src cnt is : 0.
  312. [ 0.375815] DRAM_STANDBY_PGD_ADDR:d201c000
  313. [ 0.375840] [wifi]: select wifi: rtl8188eu !!
  314. [ 0.376195] [rtl8188eu]: exec rtl8188eu_wifi_gpio_init
  315. [ 0.376210] [rtl8188eu]: module power name
  316. [ 0.376217] [rtl8188eu]: rtl8188eu module power set by axp.
  317. [ 0.376233] [rtl8188eu]: get power regulator failed.
  318. [ 0.376260] [wifi_pm]: wifi gpio init is OK !!
  319. [ 0.376451] [powernow inf] module init
  320. [ 0.376631] [powernow inf] create class sw_powernow done
  321. [ 0.378339] highmem bounce pool size: 64 pages
  322. [ 0.381669] NTFS driver 2.1.30 [Flags: R/W].
  323. [ 0.381924] fuse init (API version 7.18)
  324. [ 0.383139] msgmni has been set to 1122
  325. [ 0.384638] io scheduler noop registered
  326. [ 0.384650] io scheduler deadline registered (default)
  327. [ 0.393073] [uart]: driver initializied
  328. [ 0.393548] sw_serial.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a SW
  329. [ 0.393570] [uart]: console setup baud 115200 parity n bits 8, flow n
  330. [ 0.393596] [uart]: uart0 LCR & BAUD changed, reset controller...
  331. [ 1.968482] console [ttyS0] enabled
  332. [ 1.973959] G2D: drv_g2d_init
  333. [ 1.977443] G2D: Module initialized.major:252
  334. [ 1.983839] sunmm_probe, line 269
  335. [ 1.994037] loop: module loaded
  336. [ 1.999053] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  337. [ 2.006984] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  338. [ 2.013025] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 ime
  339. [ 2.022453] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part
  340. [ 2.031615] dma_alloc_coherent mem = 0xffde0000, size = 0x16500, mem_dma=0x40
  341. [ 2.041367] scsi0 : sw_ahci_platform
  342. [ 2.046176] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x8
  343. [ 2.057295] tun: Universal TUN/TAP device driver, 1.6
  344. [ 2.062958] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  345. [ 2.070237] [sunxi_emac]: Init wemac Ethernet Driver, V3.00
  346. [ 2.078016] PPP generic driver version 2.4.2
  347. [ 2.083566] PPP BSD Compression module registered
  348. [ 2.088809] PPP Deflate Compression module registered
  349. [ 2.095226] PPP MPPE Compression module registered
  350. [ 2.100569] NET: Registered protocol family 24
  351. [ 2.105726] PPTP driver version 0.8.5
  352. [ 2.111244] usbcore: registered new interface driver rtl8150
  353. [ 2.117775] usbcore: registered new interface driver asix
  354. [ 2.124058] usbcore: registered new interface driver qf9700
  355. [ 2.130445] usbcore: registered new interface driver cdc_ether
  356. [ 2.137290] usbcore: registered new interface driver MOSCHIP usb-ethernet drr
  357. [ 2.145689] [sw_hci_sun4i_init 1254]
  358. [ 2.149682] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ehci1(restrictd
  359. [ 2.159246] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ohci1(restrictd
  360. [ 2.168867] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ehci2(restrictd
  361. [ 2.178439] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ohci2(restrictd
  362. [ 2.188312] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0x0
  363. [ 2.196993] [sw-ehci1]: open clock
  364. [ 2.220657] [sw-ehci1]: open clock, 0x60(0x202c143), 0xcc(0x103)
  365. [ 2.227365] [sw-ehci1]: Set USB Power ON
  366. [ 2.231748] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Dr
  367. [ 2.240106] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
  368. [ 2.248084] sw-ehci sw-ehci.1: irq 71, io mem 0xf1c14000
  369. [ 2.254042] [ehci_run 736]
  370. [ 2.270759] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  371. [ 2.277707] hub 1-0:1.0: USB hub found
  372. [ 2.281925] hub 1-0:1.0: 1 port detected
  373. [ 2.287004] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0x4
  374. [ 2.295703] [sw-ohci1]: open clock
  375. [ 2.319352] [sw-ohci1]: open clock, 0x60(0x202c147), 0xcc(0x163)
  376. [ 2.326110] [sw_ohci_hcd_probe 360]:reg(0xf1c20060) = 202c147
  377. [ 2.332529] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  378. [ 2.340504] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
  379. [ 2.348415] sw-ohci sw-ohci.1: irq 96, io mem 0xf1c14400
  380. [ 2.400778] ata1: SATA link down (SStatus 0 SControl 300)
  381. [ 2.415628] hub 2-0:1.0: USB hub found
  382. [ 2.419823] hub 2-0:1.0: 1 port detected
  383. [ 2.424938] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0x8
  384. [ 2.433623] [sw-ehci2]: open clock
  385. [ 2.457272] [sw-ehci2]: open clock, 0x60(0x202c14f), 0xcc(0x167)
  386. [ 2.463978] [sw-ehci2]: Set USB Power ON
  387. [ 2.468350] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Dr
  388. [ 2.476719] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
  389. [ 2.484744] sw-ehci sw-ehci.2: irq 72, io mem 0xf1c1c000
  390. [ 2.490660] [ehci_run 736]
  391. [ 2.510759] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  392. [ 2.517650] hub 3-0:1.0: USB hub found
  393. [ 2.521927] hub 3-0:1.0: 1 port detected
  394. [ 2.526970] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc
  395. [ 2.535672] [sw-ohci2]: open clock
  396. [ 2.559320] [sw-ohci2]: open clock, 0x60(0x202c15f), 0xcc(0x1e7)
  397. [ 2.566047] [sw_ohci_hcd_probe 360]:reg(0xf1c20060) = 202c15f
  398. [ 2.572465] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  399. [ 2.580436] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
  400. [ 2.588367] sw-ohci sw-ohci.2: irq 97, io mem 0xf1c1c400
  401. [ 2.655611] hub 4-0:1.0: USB hub found
  402. [ 2.659805] hub 4-0:1.0: 1 port detected
  403. [ 2.664965] usbcore: registered new interface driver cdc_acm
  404. [ 2.671332] cdc_acm: USB Abstract Control Model driver for USB modems and ISs
  405. [ 2.680248] Initializing USB Mass Storage driver...
  406. [ 2.685993] usbcore: registered new interface driver usb-storage
  407. [ 2.692735] USB Mass Storage support registered.
  408. [ 2.698356] usbcore: registered new interface driver usbserial
  409. [ 2.704905] usbserial: USB Serial Driver core
  410. [ 2.709946] USB Serial support registered for GSM modem (1-port)
  411. [ 2.717091] usbcore: registered new interface driver option
  412. [ 2.723353] option: v0.7.2:USB Driver for GSM modems
  413. [ 2.729396] [sw_udc]: [sw_usb_udc]: binding gadget driver 'android_usb'
  414. [ 2.736803] [sw_udc]: alloc request: ep(0xc075c0f0, ep0, 64), req(0xef1bb4c0)
  415. [ 2.744798] [sw_udc]: sw_udc_pullup, is_on = 0
  416. [ 2.749752] [sw_udc]: usbd_stop_work
  417. [ 2.757205] android_usb gadget: Mass Storage Function, version: 2009/09/11
  418. [ 2.764976] android_usb gadget: Number of LUNs=3
  419. [ 2.770120] lun0: LUN: removable file: (no medium)
  420. [ 2.775643] lun1: LUN: removable file: (no medium)
  421. [ 2.781204] lun2: LUN: removable file: (no medium)
  422. [ 2.787395] android_usb gadget: android_usb ready
  423. [ 2.793431] mousedev: PS/2 mouse device common for all mice
  424. [ 2.800009] input: sw-keyboard as /devices/virtual/input/input0
  425. [ 2.807452] input: sun7i-ir as /devices/virtual/input/input1
  426. [ 2.814463] uinput result 0 , vmouse_init
  427. [ 2.819435] input: vmouse as /devices/virtual/input/input2
  428. [ 2.826837] =====ctp_fetch_sysconfig_para=====.
  429. [ 2.832020] ctp_fetch_sysconfig_para: ctp_unused.
  430. [ 2.837354] ctp_init: ctp_fetch_sysconfig_para err.
  431. [ 2.843383] sunxi_rtc_init: enter
  432. [ 2.847404] rtc_hw_init(400): start
  433. [ 2.851433] rtc_hw_init(416) err: set clksrc to external losc failed! rtc tig
  434. [ 2.860850] rtc_hw_init(431): end
  435. [ 2.864595] sunxi_rtc_gettime(34): err, losc_err_flag is 1
  436. [ 2.871334] using rtc device, rtc, for alarms
  437. [ 2.876033] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  438. [ 2.883336] i2c /dev entries driver
  439. [ 2.888610] lirc_dev: IR Remote Control driver registered, major 249
  440. [ 2.895833] IR NEC protocol handler initialized
  441. [ 2.900891] IR RC5(x) protocol handler initialized
  442. [ 2.906224] IR RC6 protocol handler initialized
  443. [ 2.911383] IR JVC protocol handler initialized
  444. [ 2.916428] IR Sony protocol handler initialized
  445. [ 2.921588] IR RC5 (streamzap) protocol handler initialized
  446. [ 2.927797] IR SANYO protocol handler initialized
  447. [ 2.933043] IR MCE Keyboard/mouse protocol handler initialized
  448. [ 2.939538] IR LIRC bridge handler initialized
  449. [ 2.944505] Linux video capture interface: v2.00
  450. [ 2.950035] [hx-cedar dev]: install start!!!
  451. [ 2.955874] [cedar dev]: install end!!!
  452. [ 2.960556] input: axp20-supplyer as /devices/platform/sun7i-i2c.0/i2c-0/0-03
  453. [ 2.982019] pmu_pekoff_time = 6000
  454. [ 2.985810] pmu_pekoff_en = 1
  455. [ 2.989110] pmu_peklong_time = 1500
  456. [ 2.993044] pmu_pekon_time = 1000
  457. [ 2.996733] pmu_pwrok_time = 64
  458. [ 3.000227] pmu_pwrnoe_time = 2000
  459. [ 3.004096] pmu_intotp_en = 1
  460. [ 3.008005] [AXP]POWER20_OFF_CTL:2070-->0x42
  461. [ 3.013378] POWER20_PEK_SET:2087-->0x9d
  462. [ 3.018242] POWER20_PEK_SET:2098-->0x9d
  463. [ 3.023215] POWER20_PEK_SET:2107-->0x9d
  464. [ 3.028081] POWER20_PEK_SET:2118-->0x9d
  465. [ 3.032986] POWER20_PEK_SET:2130-->0x9d
  466. [ 3.037850] POWER20_HOTOVER_CTL:2139-->0xad
  467. [ 3.047058] [AXP]last_rest_vol = 0, now_rest_vol = 100
  468. [ 3.053861] [AXP]charger->rest_vol = 100
  469. [ 3.061739] create_regulator: axp20_ldo2: Failed to create debugfs directory
  470. [ 3.069597] regulator_virtual_consumer_probe:get regulator:axp20_analog/fm ok
  471. [ 3.077958] regulator_virtual_consumer_probe:get regulator:axp20_pll ok
  472. [ 3.085695] regulator_virtual_consumer_probe:get regulator:axp20_hdmi ok
  473. [ 3.093481] create_regulator: axp20_buck2: Failed to create debugfs directory
  474. [ 3.101545] regulator_virtual_consumer_probe:get regulator:axp20_core ok
  475. [ 3.109341] regulator_virtual_consumer_probe:get regulator:axp20_ddr ok
  476. [ 3.117068] regulator_virtual_consumer_probe:get regulator:axp20_mic ok
  477. [ 3.125305] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-m
  478. [ 3.135129] device-mapper: multipath: version 1.3.0 loaded
  479. [ 3.141401] device-mapper: multipath round-robin: version 1.0.0 loaded
  480. [ 3.148674] device-mapper: multipath queue-length: version 0.1.0 loaded
  481. [ 3.156079] device-mapper: multipath service-time: version 0.2.0 loaded
  482. [ 3.163738] Bluetooth: HCI UART driver ver 2.2
  483. [ 3.168689] Bluetooth: HCI H4 protocol initialized
  484. [ 3.174044] Bluetooth: HCI BCSP protocol initialized
  485. [ 3.179572] Bluetooth: HCILL protocol initialized
  486. [ 3.184820] Bluetooth: HCIATH3K protocol initialized
  487. [ 3.190348] Bluetooth: MSM Sleep Mode Driver Ver 1.1
  488. [ 3.196569] [+++BLUESLEEP+++]bluesleep_probe: bluesleep_probe line 639
  489. [ 3.196576]
  490. [ 3.205572] [gpio-err] __pio_to_irq: invalid pio to irq
  491. [ 3.212298] [fantasy] err get cpu normal frequency from sysconfig failed
  492. [ 3.219993] [mmc-msg] sw_mci_init
  493. [ 3.223750] [mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
  494. [ 3.232531] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 tiB
  495. [ 3.243728] [mmc-msg] sdc0 Probe: base:0xf003e000 irq:64 sg_cpu:ffdf7000(4fc.
  496. [ 3.253470] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 tiB
  497. [ 3.264711] [mmc-msg] sdc3 Probe: base:0xf0094000 irq:67 sg_cpu:ffddf000(4fc.
  498. [ 3.274025] sunxi_leds driver init
  499. [ 3.277834] request gpio187, ret=0
  500. [ 3.281699] trigger_name:
  501. [ 3.284621] request gpio188, ret=0
  502. [ 3.288405] trigger_name:heartbeat
  503. [ 3.292834] Registered led device: green:ph20:led1
  504. [ 3.298378] Registered led device: blue:ph21:led2
  505. [ 3.307047] usbcore: registered new interface driver usbhid
  506. [ 3.313354] usbhid: USB HID core driver
  507. [ 3.318714] ashmem: initialized
  508. [ 3.322600] logger: created 256K log 'log_main'
  509. [ 3.327913] logger: created 256K log 'log_events'
  510. [ 3.333446] logger: created 256K log 'log_radio'
  511. [ 3.338867] logger: created 256K log 'log_system'
  512. [ 3.345506] usbcore: registered new interface driver snd-usb-audio
  513. [ 3.353669] value is 1
  514. [ 3.356615] enter sun7i Audio codec!!!
  515. [ 3.362535] sun7i audio support initialized
  516. [ 3.367411] sun7i Audio codec successfully loaded..
  517. [ 3.375762] asoc: sndhdmi <-> sun7i-hdmiaudio.0 mapping ok
  518. [ 3.383239] [SPDIF]sun7i-spdif cannot find any using configuration for contr!
  519. [ 3.394795] [SPDIF]sun7i_sndspdif cannot find any using configuration for co!
  520. [ 3.405328] [I2S] i2s_select type err!
  521. [ 3.409496] [I2S]sun7i-i2s cannot find any using configuration for controlle!
  522. [ 3.419887] [I2S]sndi2s cannot find any using configuration for controllers,!
  523. [ 3.429434] [I2S] i2s_master type err!
  524. [ 3.433947] [I2S] audio_format type err!
  525. [ 3.438318] [I2S] signal_inversion type err!
  526. [ 3.443093] [I2S]sun7i_sndi2s cannot find any using configuration for contro!
  527. [ 3.453180] func:sun7i_pcm_init(line:953)sun7i-pcm.c
  528. [ 3.458704] [PCM] type err!
  529. [ 3.461817] [PCM] i2s_select type err!
  530. [ 3.465985] func:sun7i_pcm_init(line:964)sun7i-pcm.c,pcm_used:-284983396
  531. [ 3.473569] get pcm_para gpio list failed
  532. [ 3.478033] func:sun7i_soc_platform_i2s_init(line:803)sun7i-pcmdma.c
  533. [ 3.485796] func:sndpcm_codec_init(line:181)sndpcm.c
  534. [ 3.491361] [PCM] type err!
  535. [ 3.494467] func:sndpcm_codec_init(line:187)sndpcm.c,pcm_used:0
  536. [ 3.501093] [PCM]sndi2s cannot find any using configuration for controllers,!
  537. [ 3.510585] pcm_used type err
  538. [ 3.514053] [PCM] pcm_master type err!
  539. [ 3.518229] [PCM] audio_format type err!
  540. [ 3.522606] [PCM] signal_inversion type err!
  541. [ 3.527357] func:sun7i_sndpcm_init(line:209)sun7i-sndpcm.c,pcm_used:0
  542. [ 3.534540] [I2S]sun7i_sndi2s cannot find any using configuration for contro!
  543. [ 3.544616] ALSA device list:
  544. [ 3.547915] #0: sun7i-CODEC Audio Codec
  545. [ 3.552540] #1: sndhdmi
  546. [ 3.555682] Netfilter messages via NETLINK v0.30.
  547. [ 3.561043] nf_conntrack version 0.5.0 (13202 buckets, 52808 max)
  548. [ 3.568396] ctnetlink v0.93: registering with nfnetlink.
  549. [ 3.574477] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  550. [ 3.582257] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  551. [ 3.589914] xt_time: kernel timezone is -0000
  552. [ 3.594891] IPv4 over IPv4 tunneling driver
  553. [ 3.600597] GRE over IPv4 demultiplexor driver
  554. [ 3.605397] GRE over IPv4 tunneling driver
  555. [ 3.611508] ip_tables: (C) 2000-2006 Netfilter Core Team
  556. [ 3.617618] TCP cubic registered
  557. [ 3.621315] Initializing XFRM netlink socket
  558. [ 3.626516] NET: Registered protocol family 10
  559. [ 3.632882] ip6_tables: (C) 2000-2006 Netfilter Core Team
  560. [ 3.639101] IPv6 over IPv4 tunneling driver
  561. [ 3.646278] NET: Registered protocol family 17
  562. [ 3.651331] NET: Registered protocol family 15
  563. [ 3.656442] Bluetooth: RFCOMM TTY layer initialized
  564. [ 3.661915] Bluetooth: RFCOMM socket layer initialized
  565. [ 3.667635] Bluetooth: RFCOMM ver 1.11
  566. [ 3.671943] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  567. [ 3.677858] Bluetooth: BNEP filters: protocol multicast
  568. [ 3.683705] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  569. [ 3.690658] L2TP core driver, V2.0
  570. [ 3.694508] PPPoL2TP kernel driver, V2.0
  571. [ 3.698871] L2TP IP encapsulation support (L2TPv3)
  572. [ 3.704423] L2TP netlink interface
  573. [ 3.708241] L2TP ethernet pseudowire support (L2TPv3)
  574. [ 3.713996] Registering the dns_resolver key type
  575. [ 3.719324] VFP support v0.3: implementor 41 architecture 2 part 30 variant 4
  576. [ 3.727896] ThumbEE CPU extension supported.
  577. [ 3.732671] [rfkill]: init no bt used in configuration
  578. [ 3.740224] regulator_init_complete: axp20_buck3: incomplete constraints, len
  579. [ 3.749215] regulator_init_complete: axp20_buck2: incomplete constraints, len
  580. [ 3.758189] regulator_init_complete: axp20_ldo4: incomplete constraints, lean
  581. [ 3.767068] regulator_init_complete: axp20_ldo3: incomplete constraints, lean
  582. [ 3.775939] regulator_init_complete: axp20_ldo2: incomplete constraints, lean
  583. [ 3.784813] regulator_init_complete: axp20_ldo1: incomplete constraints, lean
  584. [ 3.793425] sunxi_rtc_gettime(34): err, losc_err_flag is 1
  585. [ 3.799533] sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
  586. [ 3.807802] Waiting for root device /dev/mmcblk0p3...
  587. [ 4.235731] [mmc-msg] mmc 0 detect change, present 1
  588. [ 4.740781] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timB
  589. [ 4.750764] [mmc-msg] sdc0 power on
  590. [ 4.770761] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  591. [ 4.853087] [mmc-err] smc 0 err, cmd 52, RTO
  592. [ 4.858762] [mmc-err] smc 0 err, cmd 52, RTO
  593. [ 4.863629] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  594. [ 4.876504] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  595. [ 4.889115] [mmc-err] smc 0 err, cmd 5, RTO
  596. [ 4.894687] [mmc-err] smc 0 err, cmd 5, RTO
  597. [ 4.900259] [mmc-err] smc 0 err, cmd 5, RTO
  598. [ 4.905831] [mmc-err] smc 0 err, cmd 5, RTO
  599. [ 4.911231] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  600. [ 4.921737] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  601. [ 4.934598] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  602. [ 4.973895] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  603. [ 4.984308] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V widtB
  604. [ 5.049999] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V widtB
  605. [ 5.060629] mmc0: new high speed SDHC card at address 0007
  606. [ 5.067471] mmcblk0: mmc0:0007 SD04G 3.70 GiB
  607. [ 5.086165] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 >
  608. [ 5.133523] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incoms
  609. [ 5.192529] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incoms
  610. [ 5.281762] EXT4-fs (mmcblk0p3): warning: mounting unchecked fs, running e2fd
  611. [ 5.306326] EXT4-fs (mmcblk0p3): recovery complete
  612. [ 5.311707] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. )
  613. [ 5.320777] VFS: Mounted root (ext4 filesystem) on device 179:3.
  614. [ 5.329301] devtmpfs: mounted
  615. [ 5.332993] Freeing init memory: 196K
  616. [ 5.337100] Failed to execute /dev/mmcblk0p3/init. Attempting defaults...
  617. [ 5.345976] Kernel panic - not syncing: No init found. Try passing init= op.
  618. [ 5.359855] CPU0: stopping
  619. [ 5.362901] [<c00144c4>] (unwind_backtrace+0x0/0xe0) from [<c0012940>] (hand)
  620. [ 5.372508] [<c0012940>] (handle_IPI+0xf8/0x1d8) from [<c0008504>] (gic_hand)
  621. [ 5.382018] [<c0008504>] (gic_handle_irq+0x8c/0x9c) from [<c000d540>] (__irq)
  622. [ 5.391329] Exception stack(0xc0731f70 to 0xc0731fb8)
  623. [ 5.396961] 1f60: 00000003 00000001 c0730
  624. [ 5.406074] 1f80: c0730000 c077ec48 c04fb8b8 c0740b10 4000406a 410fc074 00000
  625. [ 5.415187] 1fa0: 00000000 c0731fb8 c000ead0 c000ead4 60000013 ffffffff
  626. [ 5.422567] [<c000d540>] (__irq_svc+0x40/0x70) from [<c000ead4>] (default_id)
  627. [ 5.431687] [<c000ead4>] (default_idle+0x24/0x28) from [<c000ee3c>] (cpu_idl)
  628. [ 5.440712] [<c000ee3c>] (cpu_idle+0x88/0xe8) from [<c06fe7a4>] (start_kerne)
  629. [ 5.449943] [hotplug]: try to kill cpu:0 failed!
  630. [ 5.455086] Rebooting in 10 seconds..
  631. [ 15.524512] Restarting Linux version 3.3.0 (rolivo@build) (gcc version 4.6.33
  632. [ 15.524526]
  633. [ 15.546954] sun7i_restart: to check
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!