API tools faq
paste
Advertisement
kenwi

hardware configuration

kenwi
Aug 6th, 2014
256
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.03 KB | None | 0 0
raw download clone embed print report diff
  1. U-Boot 1.2.0 (Apr 15 2008 - 17:24:31)
  2. PSPU-Boot 1.0.0.4
  3.  
  4. DRAM: 32 MB
  5. Found SPANSION Flash
  6. Flash: 8 MB
  7. In: serial
  8. Out: serial
  9. Err: serial
  10. Press SPACE to abort autoboot in 3 second(s)
  11.  
  12. => help
  13. ? - alias for 'help'
  14. autoscr - run script from memory
  15. base - print or set address offset
  16. bdinfo - print Board Info structure
  17. boot - boot default, i.e., run 'bootcmd'
  18. bootd - boot default, i.e., run 'bootcmd'
  19. bootm - boot application image from memory
  20. bootp - boot image via network using BootP/TFTP protocol
  21. cmp - memory compare
  22. coninfo - print console devices and information
  23. cp - memory copy
  24. crc32 - checksum calculation
  25. echo - echo args to console
  26. erase - erase FLASH memory
  27. eval - return addition/subraction
  28. exit - exit script
  29. flinfo - print FLASH memory information
  30. go - start application at address 'addr'
  31. help - print online help
  32. iminfo - print header information for application image
  33. imls - list all images found in flash
  34. itest - return true/false on integer compare
  35. loadb - load binary file over serial line (kermit mode)
  36. loads - load S-Record file over serial line
  37. loady - load binary file over serial line (ymodem mode)
  38. loop - infinite loop on address range
  39. md - memory display
  40. mm - memory modify (auto-incrementing)
  41. mtest - simple RAM test
  42. mw - memory write (fill)
  43. nm - memory modify (constant address)
  44. printenv- print environment variables
  45. protect - enable or disable FLASH write protection
  46. rarpboot- boot image via network using RARP/TFTP protocol
  47. reset - Perform RESET of the CPU
  48. run - run commands in an environment variable
  49. saveenv - save environment variables to persistent storage
  50. setenv - set environment variables
  51. sleep - delay execution for some time
  52. test - minimal test like /bin/sh
  53. tftpboot- boot image via network using TFTP protocol
  54. version - print monitor version
  55.  
  56. => base
  57. Base Address: 0x00000000
  58.  
  59. => bdinfo
  60. arch_number = 0x0000047B
  61. env_t = 0x00000000
  62. boot_params = 0x80000100
  63. DRAM bank = 0x00000000
  64. -> start = 0x80000000
  65. -> size = 0x02000000
  66. ethaddr = 00:40:7B:00:00:03
  67. ip_addr = 192.168.100.1
  68. baudrate = 115200 bps
  69.  
  70. => coninfo
  71. List of available devices:
  72. serial 80000003 SIO stdin stdout stderr
  73. => echo
  74.  
  75. => flinfo
  76.  
  77. Bank # 1: Spansion Serial Flash FLASH_S25FL064A
  78. Size: 8 MB in 128 Sectors
  79. Sector Start Addresses:
  80. 48000000 (RO) 48010000 (RO) 48020000 (RO) 48030000 (RO) 48040000
  81. 48050000 48060000 48070000 48080000 48090000
  82. 480A0000 480B0000 480C0000 480D0000 480E0000
  83. 480F0000 48100000 48110000 48120000 48130000
  84. 48140000 48150000 48160000 48170000 48180000
  85. 48190000 481A0000 481B0000 481C0000 481D0000
  86. 481E0000 481F0000 48200000 48210000 48220000
  87. 48230000 48240000 48250000 48260000 48270000
  88. 48280000 48290000 482A0000 482B0000 482C0000
  89. 482D0000 482E0000 482F0000 48300000 48310000
  90. 48320000 48330000 48340000 48350000 48360000
  91. 48370000 48380000 48390000 483A0000 483B0000
  92. 483C0000 483D0000 483E0000 483F0000 48400000
  93. 48410000 48420000 48430000 48440000 48450000
  94. 48460000 48470000 48480000 48490000 484A0000
  95. 484B0000 484C0000 484D0000 484E0000 484F0000
  96. 48500000 48510000 48520000 48530000 48540000
  97. 48550000 48560000 48570000 48580000 48590000
  98. 485A0000 485B0000 485C0000 485D0000 485E0000
  99. 485F0000 48600000 48610000 48620000 48630000
  100. 48640000 48650000 48660000 48670000 48680000
  101. 48690000 486A0000 486B0000 486C0000 486D0000
  102. 486E0000 486F0000 48700000 48710000 48720000
  103. 48730000 48740000 48750000 48760000 48770000
  104. 48780000 48790000 487A0000 487B0000 487C0000
  105. 487D0000 487E0000 487F0000
  106.  
  107. => boot
  108. *** ACTIMAGE = 2, will try to boot UBFI2 stored @0x483F0000
  109. ## Executing script at 483f0000
  110.  
  111.  
  112. Loading forceWare Bootscript...
  113. Booting...
  114.  
  115.  
  116. ## Booting image at 483f1048 ...
  117. Image Name: forceWare
  118. Image Type: ARM Linux Kernel Image (uncompressed)
  119. Data Size: 672224 Bytes = 656.5 kB
  120. Load Address: 80a00000
  121. Entry Point: 80a00000
  122. Verifying Checksum ... OK
  123. OK
  124.  
  125. Starting kernel ...
  126.  
  127. Starting LZMA Uncompression Algorithm.
  128. Compressed file is LZMA format.
  129. Linux version 2.6.18_pro500 (root@localhost.localdomain) (gcc version 4.2.0 TI-Puma5 20100224) #230 PREEMPT Wed Jun 1 01:00:34 EDT 2011
  130. CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv6TEJ), cr=00c538ff
  131. Machine: puma5
  132. Ignoring unrecognised tag 0x00000000
  133. Memory policy: ECC disabled, Data cache writethrough
  134. Reserved 1024k DSP memory starting from Physical 0x81f00000
  135. CPU0: D VIPT write-back cache
  136. CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
  137. CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
  138. Real-Time Preemption Support (C) 2004-2006 Ingo Molnar
  139. Built 1 zonelists. Total pages: 7936
  140. Kernel command line: root=/dev/mtdblock3 mtdparts=spansion:0x20000(U-Boot)ro,0x10000(env1),0x10000(env2),0x2d0000@0x4a0000(fWare-FS),0x50000@0x7B0000(nvram),0x3B0000@0x40000(UBFI1),0x3B0000@0x3F0000(UBFI2) console=ttyS0,115200n8
  141. WARNING: experimental RCU implementation.
  142. Interrupt controller revision : 4e822100
  143. PID hash table entries: 128 (order: 7, 512 bytes)
  144. Power & Sleep Controller @ 0xd8621000 Initialized [id-0x44822905]
  145. WARN: boardtype variable was not set, using default (tnetc550)
  146. Board type: tnetc550
  147. Initialized Peripheral Port Remap Register to base : 0x50000000
  148. Puma5 Timer0 initialized
  149. Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  150. Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  151. Memory: 31MB = 31MB total
  152. Memory: 29384KB available (1628K code, 337K data, 72K init)
  153. Mount-cache hash table entries: 512
  154. CPU: Testing write buffer coherency: ok
  155. NET: Registered protocol family 16
  156. PAL_cppi4Init : There is a room for 1314 more descriptors
  157. Off chip memory allocated: 349184
  158. QMgr Init: buffer after alignment: 81e00000
  159. avalanche_ppd_init: PP system initialized successfully.
  160. avalanche_ppd_init(729):return code 0x00
  161. HIL Core: Profile static has been Loaded.
  162. NET: Registered protocol family 2
  163. IP route cache hash table entries: 256 (order: -2, 1024 bytes)
  164. TCP established hash table entries: 1024 (order: 3, 32768 bytes)
  165. TCP bind hash table entries: 512 (order: 1, 14336 bytes)
  166. TCP: Hash tables configured (established 1024 bind 512)
  167. TCP reno registered
  168. squashfs: version 3.3 (2007/10/31) Phillip Lougher
  169. squashfs: LZMA suppport for slax.org by jro
  170. JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
  171. Initializing Cryptographic API
  172. io scheduler noop registered (default)
  173. watchdog: TI Avalanche Watchdog Timer: timer margin 42 sec
  174. TI LED driver initialized [major=254]
  175. Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
  176. serial8250: ttyS0 at MMIO map 0x8610f03 mem 0xd8610f03 (irq = 8) is a TI 16550A
  177. serial8250: ttyS1 at MMIO map 0x8610e03 mem 0xd8610e03 (irq = 7) is a TI 16550A
  178. loop: loaded (max 8 devices)
  179. Loading cpgmac driver for puma5
  180. Cpmac: Error getting mac from Boot enviroment for eth0
  181. Cpmac: Using default mac address: 08.00.28.32.06.02
  182. Pass kernel parameter ethaddr0=xx.xx.xx.xx.xx.xx
  183. to set mac address
  184. TI CPGMAC_F Linux DDA version 0.1 - CPGMAC_F DDC version 0.2
  185. Cpmac: Installed 1 instances.
  186. Cpmac driver is allocating buffer memory at init time.
  187. i2c /dev entries driver
  188. Serial Flash [Bus:0 CS:0] : s25fl064a 8192KB, 128 sectors each 64KB
  189. 7 cmdlinepart partitions found on MTD device spansion
  190. partitions[0] = {.name = U-Boot, .offset = 0x00000000,.size = 0x00020000 (128K) }
  191. partitions[1] = {.name = env1, .offset = 0x00020000,.size = 0x00010000 (64K) }
  192. partitions[2] = {.name = env2, .offset = 0x00030000,.size = 0x00010000 (64K) }
  193. partitions[3] = {.name = fWare-FS, .offset = 0x004a0000,.size = 0x002d0000 (2880K) }
  194. partitions[4] = {.name = nvram, .offset = 0x007b0000,.size = 0x00050000 (320K) }
  195. partitions[5] = {.name = UBFI1, .offset = 0x00040000,.size = 0x003b0000 (3776K) }
  196. partitions[6] = {.name = UBFI2, .offset = 0x003f0000,.size = 0x003b0000 (3776K) }
  197. Creating 7 MTD partitions on "spansion":
  198. 0x00000000-0x00020000 : "U-Boot"
  199. 0x00020000-0x00030000 : "env1"
  200. 0x00030000-0x00040000 : "env2"
  201. 0x004a0000-0x00770000 : "fWare-FS"
  202. 0x007b0000-0x00800000 : "nvram"
  203. 0x00040000-0x003f0000 : "UBFI1"
  204. 0x003f0000-0x007a0000 : "UBFI2"
  205. Serial Flash [Bus:0 CS:1] : No device found
  206. ti_spi.0: AVALANCHE SPI Controller driver at 0xd8612500 (irq = 0)
  207. ti_codec_spi.0: TI Codec SPI Controller driver at 0xd86040c8 (irq = 0)
  208. TCP bic registered
  209. NET: Registered protocol family 1
  210. NET: Registered protocol family 17
  211. VFS: Mounted root (squashfs filesystem) readonly.
  212. Freeing init memory: 72K
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!