T400mikrofon

[26831.462955] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[26831.699679] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input16
[26831.712090] usb 6-2: new full-speed USB device number 3 using uhci_hcd
[26831.885298] usb 6-2: New USB device found, idVendor=09da, idProduct=9066
[26831.885305] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[26831.885309] usb 6-2: Product: USB Device
[26831.885311] usb 6-2: Manufacturer: A4TECH
[26831.891930] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:09DA:9066.0003/input/input17
[26831.892440] hid-generic 0003:09DA:9066.0003: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1d.0-2/input0
[26831.894542] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/0003:09DA:9066.0004/input/input18
[26831.894719] hid-generic 0003:09DA:9066.0004: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1d.0-2/input1
[26834.993280] wlan0: authenticate with 60:02:b4:7d:88:66
[26834.995061] wlan0: send auth to 60:02:b4:7d:88:66 (try 1/3)
[26834.996911] wlan0: authenticated
[26835.000044] wlan0: associate with 60:02:b4:7d:88:66 (try 1/3)
[26835.003299] wlan0: RX AssocResp from 60:02:b4:7d:88:66 (capab=0x431 status=0 aid=2)
[26835.009817] wlan0: associated
[26835.009863] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[26835.009952] cfg80211: Calling CRDA for country: CZ
[26835.018365] cfg80211: Regulatory domain changed to country: CZ
[26835.018371] cfg80211:  DFS Master region: unset
[26835.018373] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[26835.018376] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[26835.018379] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
[26835.018381] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[26835.018383] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[27138.276208] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[27138.680210] wlan0: deauthenticating from 60:02:b4:7d:88:66 by local choice (reason=3)
[27138.691594] cfg80211: Calling CRDA to update world regulatory domain
[27138.705567] cfg80211: World regulatory domain updated:
[27138.705572] cfg80211:  DFS Master region: unset
[27138.705574] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[27138.705578] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[27138.705581] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[27138.705583] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[27138.705586] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[27138.705588] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[27142.919531] PM: Syncing filesystems ... done.
[27143.280216] PM: Preparing system for mem sleep
[27143.280607] Freezing user space processes ... (elapsed 0.001 seconds) done.
[27143.282498] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[27143.283682] PM: Entering mem sleep
[27143.283772] Suspending console(s) (use no_console_suspend to debug)
[27143.439048] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[27143.439357] sd 0:0:0:0: [sda] Stopping disk
[27143.844309] PM: suspend of devices complete after 560.106 msecs
[27143.844816] PM: late suspend of devices complete after 0.502 msecs
[27143.860230] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[27143.876167] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[27143.876463] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[27143.892092] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[27143.892188] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[27143.892237] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[27143.924098] PM: noirq suspend of devices complete after 79.277 msecs
[27143.925109] ACPI: Preparing to enter system sleep state S3
[27143.929575] PM: Saving platform NVS memory
[27143.931193] Disabling non-boot CPUs ...
[27143.932587] smpboot: CPU 1 is now offline
[27143.933008] ACPI: Low-level resume complete
[27143.933008] PM: Restoring platform NVS memory
[27143.933008] Enabling non-boot CPUs ...
[27143.933008] x86: Booting SMP configuration:
[27143.933008] smpboot: Booting Node 0 Processor 1 APIC 0x1
[27143.933008] Disabled fast string operations
[27143.945456] CPU1 is up
[27143.950570] ACPI: Waking up from system sleep state S3
[27144.068149] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[27144.068245] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[27144.084092] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[27144.100532] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[27144.116071] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[27144.164643] PM: noirq resume of devices complete after 141.699 msecs
[27144.165051] PM: early resume of devices complete after 0.359 msecs
[27144.168078] mei_me 0000:00:03.0: irq 44 for MSI/MSI-X
[27144.184053] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[27144.184089] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[27144.186199] usb usb3: root hub lost power or was reset
[27144.186334] usb usb4: root hub lost power or was reset
[27144.186459] usb usb5: root hub lost power or was reset
[27144.186692] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[27144.186947] usb usb6: root hub lost power or was reset
[27144.187070] usb usb7: root hub lost power or was reset
[27144.187194] usb usb8: root hub lost power or was reset
[27144.288055] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
[27144.288058] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00
[27144.288285] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -19
[27144.288288] PM: Device 00:09 failed to resume: error -19
[27144.512257] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[27144.517741] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[27144.518869] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[27144.518873] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[27144.520075] usb 1-6: reset high-speed USB device number 3 using ehci-pci
[27144.532541] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[27144.533273] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[27144.533277] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[27144.536978] ata2.00: configured for UDMA/133
[27144.661806] restoring control 00000000-0000-0000-0000-000000000001/1/2
[27144.661808] restoring control 00000000-0000-0000-0000-000000000001/2/3
[27144.661809] restoring control 00000000-0000-0000-0000-000000000001/3/4
[27144.661810] restoring control 00000000-0000-0000-0000-000000000001/18/17
[27144.667470] restoring control 00000000-0000-0000-0000-000000000101/0/2
[27144.667472] restoring control 00000000-0000-0000-0000-000000000101/1/3
[27144.667472] restoring control 00000000-0000-0000-0000-000000000101/2/6
[27144.667473] restoring control 00000000-0000-0000-0000-000000000101/3/7
[27144.667474] restoring control 00000000-0000-0000-0000-000000000101/4/8
[27144.667475] restoring control 00000000-0000-0000-0000-000000000101/5/9
[27144.667477] restoring control 00000000-0000-0000-0000-000000000101/7/12
[27144.667478] restoring control 00000000-0000-0000-0000-000000000101/8/1
[27144.667479] restoring control 00000000-0000-0000-0000-000000000101/9/4
[27144.667480] restoring control 00000000-0000-0000-0000-000000000101/10/5
[27144.667481] restoring control 00000000-0000-0000-0000-000000000101/13/13
[27144.764086] usb 4-2: reset full-speed USB device number 2 using uhci_hcd
[27144.784082] firewire_core 0000:15:00.1: rediscovered device fw0
[27145.632059] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[27145.838401] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[27145.838404] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[27145.838407] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[27145.842565] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[27145.842568] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[27145.842570] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[27145.844513] ata1.00: configured for UDMA/100
[27145.876326] sd 0:0:0:0: [sda] Starting disk
[27146.041706] PM: resume of devices complete after 1876.649 msecs
[27146.042801] PM: Finishing wakeup.
[27146.042803] Restarting tasks ... done.
[27146.068375] video LNXVIDEO:00: Restoring backlight state
[27146.176858] usb 6-2: USB disconnect, device number 3
[27147.008387] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[27147.112102] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[27147.112241] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[27147.113393] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[27147.120880] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[27147.153019] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[27151.564046] usb 6-1: new full-speed USB device number 4 using uhci_hcd
[27151.735294] usb 6-1: New USB device found, idVendor=09da, idProduct=9066
[27151.735300] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[27151.735304] usb 6-1: Product: USB Device
[27151.735307] usb 6-1: Manufacturer: A4TECH
[27151.743223] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/0003:09DA:9066.0005/input/input19
[27151.745034] hid-generic 0003:09DA:9066.0005: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1d.0-1/input0
[27151.747863] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/0003:09DA:9066.0006/input/input20
[27151.748436] hid-generic 0003:09DA:9066.0006: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1d.0-1/input1
[27154.732680] wlan0: authenticate with 60:02:b4:7d:88:66
[27154.734438] wlan0: send auth to 60:02:b4:7d:88:66 (try 1/3)
[27154.736288] wlan0: authenticated
[27154.740039] wlan0: associate with 60:02:b4:7d:88:66 (try 1/3)
[27154.743492] wlan0: RX AssocResp from 60:02:b4:7d:88:66 (capab=0x431 status=0 aid=1)
[27154.750251] wlan0: associated
[27154.750294] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[27154.750383] cfg80211: Calling CRDA for country: CZ
[27154.756836] cfg80211: Regulatory domain changed to country: CZ
[27154.756840] cfg80211:  DFS Master region: unset
[27154.756842] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[27154.756846] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[27154.756848] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
[27154.756851] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[27154.756853] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[27166.572107] [drm] HPD interrupt storm detected on connector DP-3: switching from hotplug detection to polling
[27287.028240] [drm] HPD interrupt storm detected on connector DP-3: switching from hotplug detection to polling
[28392.336357] thinkpad_acpi: EC reports that Thermal Table has changed
[28392.412226] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[46291.944492] wlan0: deauthenticating from 60:02:b4:7d:88:66 by local choice (reason=3)
[46291.978750] cfg80211: Calling CRDA to update world regulatory domain
[46291.996242] cfg80211: World regulatory domain updated:
[46291.996248] cfg80211:  DFS Master region: unset
[46291.996250] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[46291.996254] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[46291.996257] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[46291.996259] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[46291.996262] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[46291.996265] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[46293.806783] PM: Syncing filesystems ... done.
[46293.997435] PM: Preparing system for mem sleep
[46293.997947] Freezing user space processes ... (elapsed 0.001 seconds) done.
[46293.999862] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[46294.000823] PM: Entering mem sleep
[46294.000907] Suspending console(s) (use no_console_suspend to debug)
[46294.156634] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[46294.156951] sd 0:0:0:0: [sda] Stopping disk
[46294.552161] PM: suspend of devices complete after 550.843 msecs
[46294.552388] PM: late suspend of devices complete after 0.224 msecs
[46294.568206] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[46294.584159] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[46294.584450] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[46294.600090] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[46294.600185] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[46294.600233] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[46294.632094] PM: noirq suspend of devices complete after 79.702 msecs
[46294.633123] ACPI: Preparing to enter system sleep state S3
[46294.637647] PM: Saving platform NVS memory
[46294.639239] Disabling non-boot CPUs ...
[46294.640636] smpboot: CPU 1 is now offline
[46294.641012] ACPI: Low-level resume complete
[46294.641012] PM: Restoring platform NVS memory
[46294.641012] Enabling non-boot CPUs ...
[46294.641012] x86: Booting SMP configuration:
[46294.641012] smpboot: Booting Node 0 Processor 1 APIC 0x1
[46294.641012] Disabled fast string operations
[46294.653451] CPU1 is up
[46294.658559] ACPI: Waking up from system sleep state S3
[46294.776149] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[46294.776245] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[46294.792089] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[46294.808516] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[46294.824100] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[46294.872492] PM: noirq resume of devices complete after 141.404 msecs
[46294.872729] PM: early resume of devices complete after 0.194 msecs
[46294.880104] mei_me 0000:00:03.0: irq 44 for MSI/MSI-X
[46294.880134] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[46294.880167] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[46294.892173] usb usb3: root hub lost power or was reset
[46294.892297] usb usb4: root hub lost power or was reset
[46294.892420] usb usb5: root hub lost power or was reset
[46294.892647] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[46294.892900] usb usb6: root hub lost power or was reset
[46294.893023] usb usb7: root hub lost power or was reset
[46294.893146] usb usb8: root hub lost power or was reset
[46294.996062] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
[46294.996065] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00
[46294.996325] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -19
[46294.996328] PM: Device 00:09 failed to resume: error -19
[46295.212144] usb 6-1: reset full-speed USB device number 4 using uhci_hcd
[46295.216049] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[46295.221401] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[46295.222333] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[46295.222336] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[46295.236196] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[46295.237043] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[46295.237046] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[46295.240778] ata2.00: configured for UDMA/133
[46295.460129] usb 1-6: reset high-speed USB device number 3 using ehci-pci
[46295.544125] firewire_core 0000:15:00.1: rediscovered device fw0
[46295.600992] restoring control 00000000-0000-0000-0000-000000000001/1/2
[46295.600994] restoring control 00000000-0000-0000-0000-000000000001/2/3
[46295.600995] restoring control 00000000-0000-0000-0000-000000000001/3/4
[46295.600996] restoring control 00000000-0000-0000-0000-000000000001/18/17
[46295.606239] restoring control 00000000-0000-0000-0000-000000000101/0/2
[46295.606240] restoring control 00000000-0000-0000-0000-000000000101/1/3
[46295.606241] restoring control 00000000-0000-0000-0000-000000000101/2/6
[46295.606242] restoring control 00000000-0000-0000-0000-000000000101/3/7
[46295.606243] restoring control 00000000-0000-0000-0000-000000000101/4/8
[46295.606244] restoring control 00000000-0000-0000-0000-000000000101/5/9
[46295.606245] restoring control 00000000-0000-0000-0000-000000000101/7/12
[46295.606245] restoring control 00000000-0000-0000-0000-000000000101/8/1
[46295.606246] restoring control 00000000-0000-0000-0000-000000000101/9/4
[46295.606247] restoring control 00000000-0000-0000-0000-000000000101/10/5
[46295.606248] restoring control 00000000-0000-0000-0000-000000000101/13/13
[46295.704142] usb 4-2: reset full-speed USB device number 2 using uhci_hcd
[46296.340032] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[46296.542125] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[46296.542128] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[46296.542131] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[46296.546808] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[46296.546810] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[46296.546813] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[46296.548704] ata1.00: configured for UDMA/100
[46296.564096] sd 0:0:0:0: [sda] Starting disk
[46296.729640] PM: resume of devices complete after 1856.907 msecs
[46296.730612] PM: Finishing wakeup.
[46296.730614] Restarting tasks ... done.
[46296.803727] video LNXVIDEO:00: Restoring backlight state
[46297.976259] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[46298.080162] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[46298.080305] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[46298.081533] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[46298.084642] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[46298.111959] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[46305.666600] wlan0: authenticate with 60:02:b4:7d:88:66
[46305.668423] wlan0: send auth to 60:02:b4:7d:88:66 (try 1/3)
[46305.670254] wlan0: authenticated
[46305.672147] wlan0: associate with 60:02:b4:7d:88:66 (try 1/3)
[46305.675373] wlan0: RX AssocResp from 60:02:b4:7d:88:66 (capab=0x431 status=0 aid=1)
[46305.680563] wlan0: associated
[46305.680595] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[46305.680669] cfg80211: Calling CRDA for country: CZ
[46305.688654] cfg80211: Regulatory domain changed to country: CZ
[46305.688659] cfg80211:  DFS Master region: unset
[46305.688661] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[46305.688664] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[46305.688667] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
[46305.688669] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[46305.688671] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[46307.080030] [drm] HPD interrupt storm detected on connector HDMI-A-1: switching from hotplug detection to polling
[46362.426990] [drm] HPD interrupt storm detected on connector DP-3: switching from hotplug detection to polling
[46482.676098] [drm] HPD interrupt storm detected on connector DP-3: switching from hotplug detection to polling
[47043.268154] usb 6-1: USB disconnect, device number 4
[47045.933793] wlan0: deauthenticating from 60:02:b4:7d:88:66 by local choice (reason=3)
[47045.943314] cfg80211: Calling CRDA to update world regulatory domain
[47046.006364] cfg80211: World regulatory domain updated:
[47046.006370] cfg80211:  DFS Master region: unset
[47046.006372] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[47046.006375] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[47046.006378] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[47046.006381] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[47046.006383] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[47046.006386] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[47048.122423] PM: Syncing filesystems ... done.
[47048.284022] PM: Preparing system for mem sleep
[47048.284513] Freezing user space processes ... (elapsed 0.001 seconds) done.
[47048.286348] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[47048.287525] PM: Entering mem sleep
[47048.287612] Suspending console(s) (use no_console_suspend to debug)
[47048.450871] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[47048.451186] sd 0:0:0:0: [sda] Stopping disk
[47048.844154] PM: suspend of devices complete after 556.104 msecs
[47048.844374] PM: late suspend of devices complete after 0.217 msecs
[47048.860210] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[47048.876161] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[47048.876454] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[47048.892091] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[47048.892186] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[47048.892235] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[47048.924099] PM: noirq suspend of devices complete after 79.720 msecs
[47048.925126] ACPI: Preparing to enter system sleep state S3
[47048.929647] PM: Saving platform NVS memory
[47048.931296] Disabling non-boot CPUs ...
[47048.932698] smpboot: CPU 1 is now offline
[47048.933122] ACPI: Low-level resume complete
[47048.933122] PM: Restoring platform NVS memory
[47048.933122] Enabling non-boot CPUs ...
[47048.933122] x86: Booting SMP configuration:
[47048.933122] smpboot: Booting Node 0 Processor 1 APIC 0x1
[47048.933122] Disabled fast string operations
[47048.945471] CPU1 is up
[47048.950609] ACPI: Waking up from system sleep state S3
[47049.020945] thinkpad_acpi: EC reports that Thermal Table has changed
[47049.072237] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[47049.072334] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[47049.088294] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[47049.104744] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[47049.120153] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[47049.168644] PM: noirq resume of devices complete after 144.071 msecs
[47049.169041] PM: early resume of devices complete after 0.348 msecs
[47049.184066] mei_me 0000:00:03.0: irq 44 for MSI/MSI-X
[47049.188078] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[47049.188112] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[47049.190225] usb usb3: root hub lost power or was reset
[47049.190358] usb usb4: root hub lost power or was reset
[47049.190483] usb usb5: root hub lost power or was reset
[47049.190712] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[47049.191018] usb usb6: root hub lost power or was reset
[47049.191140] usb usb7: root hub lost power or was reset
[47049.191262] usb usb8: root hub lost power or was reset
[47049.292053] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
[47049.292055] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00
[47049.292472] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -19
[47049.292475] PM: Device 00:09 failed to resume: error -19
[47049.516243] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[47049.525525] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[47049.526468] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[47049.526472] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[47049.528115] usb 1-6: reset high-speed USB device number 3 using ehci-pci
[47049.536417] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[47049.537300] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[47049.537303] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[47049.541176] ata2.00: configured for UDMA/133
[47049.669505] restoring control 00000000-0000-0000-0000-000000000001/1/2
[47049.669507] restoring control 00000000-0000-0000-0000-000000000001/2/3
[47049.669508] restoring control 00000000-0000-0000-0000-000000000001/3/4
[47049.669509] restoring control 00000000-0000-0000-0000-000000000001/18/17
[47049.674998] restoring control 00000000-0000-0000-0000-000000000101/0/2
[47049.675000] restoring control 00000000-0000-0000-0000-000000000101/1/3
[47049.675001] restoring control 00000000-0000-0000-0000-000000000101/2/6
[47049.675002] restoring control 00000000-0000-0000-0000-000000000101/3/7
[47049.675003] restoring control 00000000-0000-0000-0000-000000000101/4/8
[47049.675003] restoring control 00000000-0000-0000-0000-000000000101/5/9
[47049.675005] restoring control 00000000-0000-0000-0000-000000000101/7/12
[47049.675006] restoring control 00000000-0000-0000-0000-000000000101/8/1
[47049.675006] restoring control 00000000-0000-0000-0000-000000000101/9/4
[47049.675007] restoring control 00000000-0000-0000-0000-000000000101/10/5
[47049.675008] restoring control 00000000-0000-0000-0000-000000000101/13/13
[47049.752531] firewire_core 0000:15:00.1: rediscovered device fw0
[47049.772310] usb 4-2: reset full-speed USB device number 2 using uhci_hcd
[47050.632257] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[47050.844252] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[47050.844256] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[47050.844258] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[47050.848774] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[47050.848778] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[47050.848780] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[47050.850934] ata1.00: configured for UDMA/100
[47050.864352] sd 0:0:0:0: [sda] Starting disk
[47051.029693] PM: resume of devices complete after 1860.644 msecs
[47051.030882] PM: Finishing wakeup.
[47051.030884] Restarting tasks ... done.
[47051.071016] video LNXVIDEO:00: Restoring backlight state
[47053.036045] [drm] HPD interrupt storm detected on connector DP-3: switching from hotplug detection to polling
[47053.076270] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[47053.180093] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[47053.180252] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[47053.181432] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[47053.185483] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[47053.214736] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[47060.908473] wlan0: authenticate with 60:02:b4:7d:88:66
[47060.910615] wlan0: send auth to 60:02:b4:7d:88:66 (try 1/3)
[47060.912462] wlan0: authenticated
[47060.916028] wlan0: associate with 60:02:b4:7d:88:66 (try 1/3)
[47060.919485] wlan0: RX AssocResp from 60:02:b4:7d:88:66 (capab=0x431 status=0 aid=2)
[47060.925618] wlan0: associated
[47060.925659] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[47060.925745] cfg80211: Calling CRDA for country: CZ
[47060.932052] cfg80211: Regulatory domain changed to country: CZ
[47060.932056] cfg80211:  DFS Master region: unset
[47060.932058] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[47060.932062] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[47060.932064] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
[47060.932067] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[47060.932069] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[47173.108109] [drm] HPD interrupt storm detected on connector DP-3: switching from hotplug detection to polling
[47289.362130] waiting module removal not supported: please upgrade
[47289.362682] waiting module removal not supported: please upgrade
[47289.362870] waiting module removal not supported: please upgrade
[47502.428050] usb 6-2: new full-speed USB device number 5 using uhci_hcd
[47502.602109] usb 6-2: New USB device found, idVendor=09da, idProduct=9066
[47502.602115] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[47502.602119] usb 6-2: Product: USB Device
[47502.602122] usb 6-2: Manufacturer: A4TECH
[47502.609980] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:09DA:9066.0007/input/input21
[47502.610299] hid-generic 0003:09DA:9066.0007: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1d.0-2/input0
[47502.612753] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/0003:09DA:9066.0008/input/input22
[47502.612933] hid-generic 0003:09DA:9066.0008: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1d.0-2/input1