API tools faq
paste
Advertisement
Guest User

Armbian 5.14 on BPi M2+

a guest
Jun 3rd, 2016
338
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 32.66 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2016.05-armbian (Jun 03 2016 - 15:33:42)
  2. DRAM: 1024 MiB
  3. Trying to boot from MMC1
  4.  
  5.  
  6. U-Boot 2016.05-armbian (Jun 03 2016 - 15:33:42 +0200) Allwinner Technology
  7.  
  8. CPU: Allwinner H3 (SUN8I 1680)
  9. Model: Xunlong Orange Pi PC
  10. DRAM: 1 GiB
  11. MMC: SUNXI SD/MMC: 0 (SD), SUNXI SD/MMC: 1
  12. *** Warning - bad CRC, using default environment
  13.  
  14. In: serial
  15. Out: serial
  16. Err: serial
  17. Net: No ethernet found.
  18. starting USB...
  19. USB0: USB EHCI 1.00
  20. USB1: USB OHCI 1.0
  21. USB2: USB EHCI 1.00
  22. USB3: USB OHCI 1.0
  23. USB4: USB EHCI 1.00
  24. USB5: USB OHCI 1.0
  25. scanning bus 0 for devices... 1 USB Device(s) found
  26. scanning bus 2 for devices... 1 USB Device(s) found
  27. scanning bus 4 for devices... 1 USB Device(s) found
  28. Hit any key to stop autoboot: 0
  29. switch to partitions #0, OK
  30. mmc0 is current device
  31. Scanning mmc 0:1...
  32. Found U-Boot script /boot/boot.scr
  33. 2347 bytes read in 189 ms (11.7 KiB/s)
  34. ## Executing script at 43100000
  35. gpio: pin PL10 (gpio 298) value is 1
  36. Warning: value of pin is still 0
  37. gpio: pin PG11 (gpio 203) value is 1
  38. ** File not found /boot/.verbose **
  39. ** File not found /boot/.next **
  40. ** Unrecognized filesystem type **
  41. ** File not found .next **
  42. 38168 bytes read in 316 ms (117.2 KiB/s)
  43. 3135866 bytes read in 907 ms (3.3 MiB/s)
  44. 5059448 bytes read in 921 ms (5.2 MiB/s)
  45. Kernel image @ 0x48000000 [ 0x000000 - 0x4d3378 ]
  46. ## Loading init Ramdisk from Legacy Image at 42000000 ...
  47. Image Name: uInitrd
  48. Image Type: ARM Linux RAMDisk Image (gzip compressed)
  49. Data Size: 3135802 Bytes = 3 MiB
  50. Load Address: 00000000
  51. Entry Point: 00000000
  52. Verifying Checksum ... OK
  53. Using machid 0x1029 from environment
  54.  
  55. Starting kernel ...
  56.  
  57. [sun8i_fixup]: From boot, get meminfo:
  58. Start: 0x40000000
  59. Size: 1024MB
  60. ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1
  61. ion_reserve_select: ion chipid [0x2004620!
  62. ion_reserve_common: ion reserve: [0x50000000, 0x60000000]!
  63.  
  64. U-Boot SPL 2016.05-armbian (Jun 03 2016 - 16:49:18)
  65. DRAM: 1024 MiB
  66. Trying to boot from MMC1
  67.  
  68.  
  69. U-Boot 2016.05-armbian (Jun 03 2016 - 16:49:18 +0200) Allwinner Technology
  70.  
  71. CPU: Allwinner H3 (SUN8I 1680)
  72. Model: Xunlong Orange Pi PC
  73. DRAM: 1 GiB
  74. MMC: SUNXI SD/MMC: 0 (SD), SUNXI SD/MMC: 1
  75. *** Warning - bad CRC, using default environment
  76.  
  77. In: serial
  78. Out: serial
  79. Err: serial
  80. Net: No ethernet found.
  81. starting USB...
  82. USB0: USB EHCI 1.00
  83. USB1: USB OHCI 1.0
  84. USB2: USB EHCI 1.00
  85. USB3: USB OHCI 1.0
  86. USB4: USB EHCI 1.00
  87. USB5: USB OHCI 1.0
  88. scanning bus 0 for devices... 1 USB Device(s) found
  89. scanning bus 2 for devices... 1 USB Device(s) found
  90. scanning bus 4 for devices... 1 USB Device(s) found
  91. Hit any key to stop autoboot: 0
  92. switch to partitions #0, OK
  93. mmc0 is current device
  94. Scanning mmc 0:1...
  95. Found U-Boot script /boot/boot.scr
  96. 2355 bytes read in 215 ms (9.8 KiB/s)
  97. ## Executing script at 43100000
  98. gpio: pin PL10 (gpio 298) value is 1
  99. Warning: value of pin is still 0
  100. gpio: pin PG11 (gpio 203) value is 1
  101. 189 bytes read in 148 ms (1000 Bytes/s)
  102. ** File not found /boot/.next **
  103. ** Unrecognized filesystem type **
  104. ** File not found .next **
  105. 38256 bytes read in 323 ms (115.2 KiB/s)
  106. 3135866 bytes read in 933 ms (3.2 MiB/s)
  107. 5059448 bytes read in 1473 ms (3.3 MiB/s)
  108. Kernel image @ 0x48000000 [ 0x000000 - 0x4d3378 ]
  109. ## Loading init Ramdisk from Legacy Image at 42000000 ...
  110. Image Name: uInitrd
  111. Image Type: ARM Linux RAMDisk Image (gzip compressed)
  112. Data Size: 3135802 Bytes = 3 MiB
  113. Load Address: 00000000
  114. Entry Point: 00000000
  115. Verifying Checksum ... OK
  116. Using machid 0x1029 from environment
  117.  
  118. Starting kernel ...
  119.  
  120. [sun8i_fixup]: From boot, get meminfo:
  121. Start: 0x40000000
  122. Size: 1024MB
  123. ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1
  124. ion_reserve_select: ion chipid [0x2004620!
  125. ion_reserve_common: ion reserve: [0x50000000, 0x60000000]!
  126. [ 0.000000] Booting Linux on physical CPU 0
  127. [ 0.000000] Initializing cgroup subsys cpuset
  128. [ 0.000000] Initializing cgroup subsys cpu
  129. [ 0.000000] Linux version 3.4.112-sun8i (root@armbian) (gcc version 5.3.1 20160413 (Ubuntu/Linaro 5.3.1-14ubuntu2) ) #2 SMP PREEMPT Fri Jun 3 15:37:6
  130. [ 0.000000] cma: CMA: reserved 256 MiB at 50000000
  131. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c148b000 s11968 r8192 d12608 u32768
  132. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rootfstype=ext4 cgroup_enable=memory swapaccount=1 panic=10 conso7
  133. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  134. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  135. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  136. [ 0.000000] allocated 2097152 bytes of page_cgroup
  137. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  138. [ 0.000000] Memory: 1024MB = 1024MB total
  139. [ 0.000000] Memory: 758592k/758592k available, 289984k reserved, 270336K highmem
  140. [ 0.000000] Virtual kernel memory layout:
  141. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  142. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  143. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  144. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  145. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  146. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  147. [ 0.000000] .text : 0xc0008000 - 0xc0969d74 (9608 kB)
  148. [ 0.000000] .init : 0xc096a000 - 0xc09bcec0 ( 332 kB)
  149. [ 0.000000] .data : 0xc09be000 - 0xc0a37f90 ( 488 kB)
  150. [ 0.000000] .bss : 0xc0a37fb4 - 0xc0b73110 (1261 kB)
  151. [ 0.000000] Preemptible hierarchical RCU implementation.
  152. [ 0.000000] Additional per-CPU info printed with stalls.
  153. [ 0.000000] NR_IRQS:544
  154. [ 0.000000] Architected local timer running at 24.00MHz.
  155. [ 0.000000] Switching to timer-based delay loop
  156. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  157. [ 0.000000] Console: colour dummy device 80x30
  158. [ 0.000258] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
  159. [ 0.000288] pid_max: default: 32768 minimum: 301
  160. [ 0.000697] Mount-cache hash table entries: 512
  161. [ 0.001876] Initializing cgroup subsys cpuacct
  162. [ 0.001895] Initializing cgroup subsys memory
  163. [ 0.001950] Initializing cgroup subsys devices
  164. [ 0.001965] Initializing cgroup subsys freezer
  165. [ 0.001979] Initializing cgroup subsys blkio
  166. [ 0.002009] Initializing cgroup subsys perf_event
  167. [ 0.002105] CPU: Testing write buffer coherency: ok
  168. [ 0.002157] ftrace: allocating 25980 entries in 77 pages
  169. [ 0.040329] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  170. [ 0.040349] [sunxi_smp_prepare_cpus] enter
  171. [ 0.040391] Setting up static identity map for 0x4069eb20 - 0x4069eb78
  172. [ 0.041517] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  173. [ 0.041651] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  174. [ 0.050555] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  175. [ 0.050678] Brought up 4 CPUs
  176. [ 0.050678] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
  177. [ 0.051071] devtmpfs: initialized
  178. [ 0.062434] wakeup src cnt is : 1.
  179. [ 0.062493] sunxi pm init
  180. [ 0.062660] pinctrl core: initialized pinctrl subsystem
  181. [ 0.074873] NET: Registered protocol family 16
  182. [ 0.075786] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  183. [ 0.075786] script_sysfs_init success
  184. [ 0.075786] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
  185. [ 0.075786] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
  186. [ 0.075786] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  187. [ 0.075786] hw-breakpoint: maximum watchpoint size is 8 bytes.
  188. [ 0.075862] script config pll_video to 297 Mhz
  189. [ 0.075882] script config pll_de to 864 Mhz
  190. [ 0.075920] script config pll_ve to 402 Mhz
  191. [ 0.082336] bio: create slab <bio-0> at 0
  192. [ 0.082336] [ARISC] :sunxi-arisc driver v1.04
  193. [ 0.106172] [ARISC] :arisc version: [v0.1.58]
  194. [ 0.188952] [ARISC] :sunxi-arisc driver v1.04 startup succeeded
  195. [ 0.190914] SCSI subsystem initialized
  196. [ 0.190914] usbcore: registered new interface driver usbfs
  197. [ 0.190914] usbcore: registered new interface driver hub
  198. [ 0.190914] usbcore: registered new device driver usb
  199. [ 0.190914] twi_chan_cfg()340 - [twi0] has no twi_regulator.
  200. [ 0.190914] twi_chan_cfg()340 - [twi1] has no twi_regulator.
  201. [ 0.190914] twi_chan_cfg()340 - [twi2] has no twi_regulator.
  202. [ 0.190953] Linux video capture interface: v2.00
  203. [ 0.191225] Advanced Linux Sound Architecture Driver Version 1.0.25.
  204. [ 0.192119] cfg80211: Calling CRDA to update world regulatory domain
  205. [ 0.192185] Switching to clocksource arch_sys_counter
  206. [ 0.206723] FS-Cache: Loaded
  207. [ 0.207048] CacheFiles: Loaded
  208. [ 0.220721] NET: Registered protocol family 2
  209. [ 0.235096] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  210. [ 0.235817] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  211. [ 0.238052] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  212. [ 0.239394] TCP: Hash tables configured (established 131072 bind 65536)
  213. [ 0.239408] TCP: reno registered
  214. [ 0.239425] UDP hash table entries: 512 (order: 2, 16384 bytes)
  215. [ 0.239472] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  216. [ 0.239892] NET: Registered protocol family 1
  217. [ 0.240387] RPC: Registered named UNIX socket transport module.
  218. [ 0.240403] RPC: Registered udp transport module.
  219. [ 0.240414] RPC: Registered tcp transport module.
  220. [ 0.240424] RPC: Registered tcp NFSv4.1 backchannel transport module.
  221. [ 0.240648] Trying to unpack rootfs image as initramfs...
  222. [ 0.493645] Freeing initrd memory: 3060K
  223. [ 0.494096] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
  224. [ 0.494239] sunxi_reg_init enter
  225. [ 0.495322] audit: initializing netlink socket (disabled)
  226. [ 0.495375] type=2000 audit(0.490:1): initialized
  227. [ 0.497826] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  228. [ 0.498919] NFS: Registering the id_resolver key type
  229. [ 0.499400] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  230. [ 0.499418] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  231. [ 0.500370] NTFS driver 2.1.30 [Flags: R/W].
  232. [ 0.500756] fuse init (API version 7.18)
  233. [ 0.501690] Btrfs loaded
  234. [ 0.501721] msgmni has been set to 1471
  235. [ 0.503442] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  236. [ 0.503465] io scheduler noop registered
  237. [ 0.503477] io scheduler deadline registered
  238. [ 0.503559] io scheduler cfq registered (default)
  239. [ 0.504115] [DISP]disp_module_init
  240. [ 0.504473] cmdline,init_disp=
  241. [ 0.504510] cmdline,disp=
  242. [ 0.513909] [DISP] Fb_map_kernel_logo,line:932:Fb_map_kernel_logo failed!
  243. [ 0.534904] Console: switching to colour frame buffer device 160x45
  244. [ 0.556929] [DISP]disp_module_init finish
  245. [ 0.557185] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
  246. [ 0.557206] sw_uart_get_devinfo()1503 - uart1 has no uart_regulator.
  247. [ 0.557224] sw_uart_get_devinfo()1503 - uart2 has no uart_regulator.
  248. [ 0.557242] sw_uart_get_devinfo()1503 - uart3 has no uart_regulator.
  249. [ 0.557925] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  250. [ 0.557941] sw_uart_pm()890 - uart0 clk is already enable
  251. [ 0.557963] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
  252. [ 0.657424] console [ttyS0] enabled
  253. [ 1.160558] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
  254. [ 1.160913] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
  255. [ 1.161277] uart3: ttyS3 at MMIO 0x1c28c00 (irq = 35) is a SUNXI
  256. [ 1.167211] brd: module loaded
  257. [ 1.172238] loop: module loaded
  258. [ 1.246565] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator.
  259. [ 1.351741] sunxi_spi_chan_cfg()1376 - [spi-1] has no spi_regulator.
  260. [ 1.359461] spi spi0: master is unqueued, this is deprecated
  261. [ 1.366175] tun: Universal TUN/TAP device driver, 1.6
  262. [ 1.371807] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  263. [ 1.380263] PPP generic driver version 2.4.2
  264. [ 1.385211] PPP BSD Compression module registered
  265. [ 1.390454] PPP Deflate Compression module registered
  266. [ 1.399224] PPP MPPE Compression module registered
  267. [ 1.404585] NET: Registered protocol family 24
  268. [ 1.409589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  269. [ 1.436961] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  270. [ 1.445891] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
  271. [ 1.454969] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
  272. [ 1.480039] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
  273. [ 1.487354] hub 1-0:1.0: USB hub found
  274. [ 1.491564] hub 1-0:1.0: 1 port detected
  275. [ 1.516364] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  276. [ 1.525286] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2
  277. [ 1.534181] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000
  278. [ 1.560039] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00
  279. [ 1.567246] hub 2-0:1.0: USB hub found
  280. [ 1.571457] hub 2-0:1.0: 1 port detected
  281. [ 1.596269] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  282. [ 1.605199] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3
  283. [ 1.614073] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf1c1c000
  284. [ 1.640048] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00
  285. [ 1.647242] hub 3-0:1.0: USB hub found
  286. [ 1.651439] hub 3-0:1.0: 1 port detected
  287. [ 1.656251] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  288. [ 1.683196] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  289. [ 1.691733] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 4
  290. [ 1.700182] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
  291. [ 1.764710] hub 4-0:1.0: USB hub found
  292. [ 1.768884] hub 4-0:1.0: 1 port detected
  293. [ 1.793710] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  294. [ 1.802244] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 5
  295. [ 1.810690] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400
  296. [ 1.874698] hub 5-0:1.0: USB hub found
  297. [ 1.878871] hub 5-0:1.0: 1 port detected
  298. [ 1.903746] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver
  299. [ 1.912282] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 6
  300. [ 1.920735] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf1c1c400
  301. [ 1.984760] hub 6-0:1.0: USB hub found
  302. [ 1.988934] hub 6-0:1.0: 1 port detected
  303. [ 1.993787] Initializing USB Mass Storage driver...
  304. [ 1.999435] usbcore: registered new interface driver usb-storage
  305. [ 2.006131] USB Mass Storage support registered.
  306. [ 2.011369] usbcore: registered new interface driver ums-alauda
  307. [ 2.017988] usbcore: registered new interface driver ums-cypress
  308. [ 2.024730] usbcore: registered new interface driver ums-datafab
  309. [ 2.031466] usbcore: registered new interface driver ums_eneub6250
  310. [ 2.038381] usbcore: registered new interface driver ums-freecom
  311. [ 2.045123] usbcore: registered new interface driver ums-isd200
  312. [ 2.051762] usbcore: registered new interface driver ums-jumpshot
  313. [ 2.058582] usbcore: registered new interface driver ums-karma
  314. [ 2.065130] usbcore: registered new interface driver ums-onetouch
  315. [ 2.071986] usbcore: registered new interface driver ums-realtek
  316. [ 2.078707] usbcore: registered new interface driver ums-sddr09
  317. [ 2.085351] usbcore: registered new interface driver ums-sddr55
  318. [ 2.092045] usbcore: registered new interface driver ums-usbat
  319. [ 2.098889] file system registered
  320. [ 2.104704] android_usb gadget: Mass Storage Function, version: 2009/09/11
  321. [ 2.112377] android_usb gadget: Number of LUNs=3
  322. [ 2.117504] lun0: LUN: removable file: (no medium)
  323. [ 2.122938] lun1: LUN: removable file: (no medium)
  324. [ 2.128353] lun2: LUN: removable file: (no medium)
  325. [ 2.134185] android_usb gadget: android_usb ready
  326. [ 2.140493] mousedev: PS/2 mouse device common for all mice
  327. [ 2.146951] sunxikbd_init failed.
  328. [ 2.151355] ls_fetch_sysconfig_para: type err device_used = -1073060236.
  329. [ 2.158998] =========script_get_err============
  330. [ 2.159719] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
  331. [ 2.159776] i2c /dev entries driver
  332. [ 2.160296] IR RC5(x) protocol handler initialized
  333. [ 2.180616] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x18)
  334. [ 2.189969] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x19)
  335. [ 2.199338] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x1a)
  336. [ 2.208706] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x29)
  337. [ 2.218071] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2a)
  338. [ 2.227434] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2b)
  339. [ 2.236798] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4c)
  340. [ 2.246161] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4d)
  341. [ 2.255520] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4e)
  342. [ 2.264905] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x18)
  343. [ 2.274290] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x19)
  344. [ 2.283676] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x1a)
  345. [ 2.293061] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x29)
  346. [ 2.302446] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2a)
  347. [ 2.311833] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2b)
  348. [ 2.321218] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4c)
  349. [ 2.330602] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4d)
  350. [ 2.339968] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4e)
  351. [ 2.349166] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
  352. [ 2.356350] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf
  353. [ 2.367559] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
  354. [ 2.375025] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
  355. [ 2.381228] timeout_to_interv, line 167
  356. [ 2.385483] interv_to_timeout, line 189
  357. [ 2.389739] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec
  358. [ 2.399305] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  359. [ 2.408814] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq
  360. [ 2.428176] no green_led, ignore it!
  361. [ 2.432166] no blue_led, ignore it!
  362. [ 2.436346] no led_0, ignore it!
  363. [ 2.439926] no led_1, ignore it!
  364. [ 2.443528] no led_2, ignore it!
  365. [ 2.447108] no led_3, ignore it!
  366. [ 2.450702] no led_4, ignore it!
  367. [ 2.454281] no led_5, ignore it!
  368. [ 2.457860] no led_6, ignore it!
  369. [ 2.461508] no led_7, ignore it!
  370. [ 2.465930] usbcore: registered new interface driver usbhid
  371. [ 2.472150] usbhid: USB HID core driver
  372. [ 2.480643] asoc: sndcodec <-> sunxi-codec mapping ok
  373. [ 2.487155] [DAUDIO]sunxi-daudio cannot find any using configuration for controllers, return directly!
  374. [ 2.497709] [I2S]snddaudio cannot find any using configuration for controllers, return directly!
  375. [ 2.507495] [DAUDIO0] driver not init,just return.
  376. [ 2.516562] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
  377. [ 2.523621] oprofile: using arm/armv7-ca7
  378. [ 2.528243] u32 classifier
  379. [ 2.531280] Actions configured
  380. [ 2.535228] IPv4 over IPv4 tunneling driver
  381. [ 2.540494] TCP: bic registered
  382. [ 2.543995] TCP: cubic registered
  383. [ 2.547680] TCP: westwood registered
  384. [ 2.551674] TCP: highspeed registered
  385. [ 2.555748] TCP: hybla registered
  386. [ 2.559432] TCP: htcp registered
  387. [ 2.563054] TCP: vegas registered
  388. [ 2.566740] TCP: veno registered
  389. [ 2.570343] TCP: scalable registered
  390. [ 2.574317] TCP: lp registered
  391. [ 2.577711] TCP: yeah registered
  392. [ 2.581326] TCP: illinois registered
  393. [ 2.585298] Initializing XFRM netlink socket
  394. [ 2.585380] mmc0: new high speed SDHC card at address 0007
  395. [ 2.596255] mmcblk0: mmc0:0007 SD4GB 3.70 GiB
  396. [ 2.601337] NET: Registered protocol family 10
  397. [ 2.606395] mmcblk0: p1
  398. [ 2.609680] mmcblk mmc0:0007: Card claimed for testing.
  399. [ 2.610156] NET: Registered protocol family 17
  400. [ 2.610183] NET: Registered protocol family 15
  401. [ 2.610224] Registering the dns_resolver key type
  402. [ 2.630521] VFP support v0.3:
  403. [ 2.630570] mmc0:0007: SD4GB 3.70 GiB
  404. [ 2.630588] *******************sd init ok*******************
  405. [ 2.644352] ThumbEE CPU extension supported.
  406. [ 2.649098] Registering SWP/SWPB emulation handler
  407. [ 2.654944] registered taskstats version 1
  408. [ 2.659892] cmdline,disp=
  409. [ 2.693803] ths_fetch_sysconfig_para: type err device_used = 1.
  410. [ 2.701756] CPU Budget:corekeeper enabled
  411. [ 2.706399] CPU Budget:Register notifier
  412. [ 2.710777] CPU Budget:register Success
  413. [ 2.715033] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
  414. [ 2.740114] ALSA device list:
  415. [ 2.743403] #0: audiocodec
  416. [ 2.746592] #1: sndhdmi
  417. [ 2.750318] Freeing init memory: 328K
  418. Loading, please wait...
  419. starting version 229
  420. [ 3.024032] vmouse_input_dev_open
  421. [ 3.060207] vmouse_input_dev_close
  422. [ 3.300047] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device0, type=4, mode=5
  423. Begin: Loading essential drivers ... done.
  424. Begin: Running /scripts/init-premount ... done.
  425. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  426. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
  427. done.
  428. Warning: fsck not present, so skipping root file system
  429. [ 3.820377] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
  430. done.
  431. Begin: Running /scripts/local-bottom ... done.
  432. Begin: Running /scripts/init-bottom ... done.
  433. [ 4.005852] mmc2: new high speed DDR MMC card at address 0001
  434. [ 4.013379] mmcblk1: mmc2:0001 8WMB3R 7.28 GiB
  435. [ 4.018878] mmcblk1boot0: mmc2:0001 8WMB3R partition 1 4.00 MiB
  436. [ 4.031684] mmcblk1boot1: mmc2:0001 8WMB3R partition 2 4.00 MiB
  437. [ 4.039716] mmcblk1: p1
  438. [ 4.045086] mmcblk1boot1: unknown partition table
  439. [ 4.052563] mmcblk1boot0: unknown partition table
  440. [ 4.058198] mmcblk mmc2:0001: Card claimed for testing.
  441. [ 4.064050] mmc2:0001: 8WMB3R 7.28 GiB
  442. [ 4.068361] *******************mmc init ok *******************
  443. [ 4.426766] systemd[1]: System time before build time, advancing clock.
  444. [ 5.070315] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUT)
  445. [ 5.090934] systemd[1]: Detected architecture arm.
  446.  
  447. Welcome to Ubuntu 16.04 LTS!
  448.  
  449. [ 5.131379] systemd[1]: Set hostname to <bananapim2plus>.
  450. [ 5.627047] systemd[1]: Created slice System Slice.
  451. [ OK ] Created slice System Slice.
  452. [ 5.650462] systemd[1]: Listening on Syslog Socket.
  453. [ OK ] Listening on Syslog Socket.
  454. [ 5.670332] systemd[1]: Listening on Journal Socket.
  455. [ OK ] Listening on Journal Socket.
  456. [ 5.760747] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  457. Starting Create list of required st... nodes for the current kernel...
  458. [ 5.950420] systemd[1]: Mounting POSIX Message Queue File System...
  459. Mounting POSIX Message Queue File System...
  460. [ 5.980540] systemd[1]: Listening on udev Kernel Socket.
  461. [ OK ] Listening on udev Kernel Socket.
  462. [ 6.010723] systemd[1]: Listening on Journal Socket (/dev/log).
  463. [ OK ] Listening on Journal Socket (/dev/log).
  464. [ 6.110580] systemd[1]: Starting Nameserver information manager...
  465. Starting Nameserver information manager...
  466. [ 6.310697] systemd[1]: Starting Restore / save the current clock...
  467. Starting Restore / save the current clock...
  468. [ 6.410623] systemd[1]: Created slice system-getty.slice.
  469. [ OK ] Created slice system-getty.slice.
  470. [ 6.441269] systemd[1]: Created slice system-serial\x2dgetty.slice.
  471. [ OK ] Created slice system-serial\x2dgetty.slice.
  472. [ 6.470896] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  473. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  474. [ 6.500704] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  475. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  476. [ 6.590853] systemd[1]: Starting Load Kernel Modules...
  477. Starting Load Kernel Modules...
  478. [ 6.735409] systemd[1]: Mounting Debug File System...
  479. Mounting Debug File System...
  480. [ 6.761540] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  481. [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
  482. [ 6.790380] systemd[1]: Reached target Encrypted Volumes.
  483. [ OK ] Reached target Encrypted Volumes.
  484. [ 6.820438] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  485. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  486. [ 6.850732] systemd[1]: Listening on fsck to fsckd communication Socket.
  487. [ OK ] Listening on fsck to fsckd communication Socket.
  488. [ 6.940695] systemd[1]: Starting File System Check on Root Device...
  489. Starting File System Check on Root Device...
  490. [ 6.970463] systemd[1]: Listening on udev Control Socket.
  491. [ OK ] Listening on udev Control Socket.
  492. [ 7.000614] systemd[1]: Listening on Journal Audit Socket.
  493. [ OK ] Listening on Journal Audit Socket.
  494. [ 7.080614] systemd[1]: Created slice User and Session Slice.
  495. [ OK ] Created slice User and Session Slice.
  496. [ 7.110378] systemd[1]: Reached target Slices.
  497. [ OK ] Reached target Slices.
  498. [ 7.130423] systemd[1]: Reached target Remote File Systems (Pre).
  499. [ 7.131443] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  500. [ 7.133042] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  501. [ 7.134639] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  502. [ 7.137632] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  503. [ OK ] Reached target Remote File Systems (Pre).
  504. [ 7.187534] systemd[1]: Reached target Remote File Systems.
  505. [ OK ] Reached target Remote File Systems.
  506. [ 7.230712] mmc1: new high speed SDIO card at address 0001
  507. [ 7.237360] *******************sdio init ok*******************
  508. [ 7.273324] systemd[1]: Mounted Debug File System.
  509. [ OK ] Mounted Debug File System.
  510. [ 7.300318] systemd[1]: Mounted POSIX Message Queue File System.
  511. [ OK ] Mounted POSIX Message Queue File System.
  512. [ 7.470133] systemd[1]: Started Create list of required static device nodes for the current kernel.
  513. [ OK ] Started Create list of required sta...ce nodes for the current kernel.
  514. [ 7.870244] systemd[1]: Started Restore / save the current clock.
  515. [ OK ] Started Restore / save the current clock.
  516. [ 8.050217] systemd[1]: Started Load Kernel Modules.
  517. [ OK ] Started Load Kernel Modules.
  518. [ 8.190196] systemd[1]: Started File System Check on Root Device.
  519. [ OK ] Started File System Check on Root Device.
  520. [ 8.370824] systemd[1]: Started Nameserver information manager.
  521. [ OK ] Started Nameserver information manager.
  522. [ 8.435324] systemd[1]: Time has been changed
  523. [ 8.540693] systemd[1]: Started File System Check Daemon to report status.
  524. [ OK ] Started File System Check Daemon to report status.
  525. [ 8.680619] systemd[1]: Starting Remount Root and Kernel File Systems...
  526. Starting Remount Root and Kernel File Systems...
  527. [ 8.760791] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
  528. [ 8.810689] systemd[1]: Starting Apply Kernel Variables...
  529. Starting Apply Kernel Variables...
  530. Mounting FUSE Control File System...
  531. Starting Create Static Device Nodes in /dev...
  532. [ OK ] Mounted FUSE Control File System.
  533. [ OK ] Started Remount Root and Kernel File Systems.
  534. [ OK ] Started Apply Kernel Variables.
  535. [ OK ] Started Create Static Device Nodes in /dev.
  536. Starting udev Kernel Device Manager...
  537. Activating swap /var/swap...
  538. Starting udev Coldplug all Devices...
  539. [ OK ] Reached target Local File Systems (Pre).
  540. Mounting /tmp...
  541. Starting Load/Save Random Seed...
  542. [ OK ] Activated swap /var/swap.
  543. [ OK ] Mounted /tmp.
  544. [ OK ] Started udev Kernel Device Manager.
  545. [ OK ] Started Load/Save Random Seed.
  546. [ OK ] Started udev Coldplug all Devices.
  547. [ OK ] Found device /dev/ttyS0.
  548. [ OK ] Reached target Sound Card.
  549. [ OK ] Reached target Local File Systems.
  550. Starting Set console keymap...
  551. Starting Raise network interfaces...
  552. [ OK ] Started Entropy daemon using the HAVEGE algorithm.
  553. Starting Journal Service...
  554. [ OK ] Reached target Swap.
  555. [ OK ] Started Set console keymap.
  556. [ OK ] Started Journal Service.
  557. [ OK ] Started ifup for eth0.
  558. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  559. Starting Flush Journal to Persistent Storage...
  560. Starting Load/Save RF Kill Switch Status...
  561. [ OK ] Found device /sys/subsystem/net/devices/eth0.
  562. [ OK ] Started Flush Journal to Persistent Storage.
  563. [ OK ] Started Load/Save RF Kill Switch Status.
  564. Starting Create Volatile Files and Directories...
  565. [ OK ] Started Create Volatile Files and Directories.
  566. Starting Update UTMP about System Boot/Shutdown...
  567. [ OK ] Reached target System Time Synchronized.
  568. [ OK ] Started Update UTMP about System Boot/Shutdown.
  569. [ OK ] Reached target System Initialization.
  570. [ OK ] Started Daily Cleanup of Temporary Directories.
  571. [ OK ] Listening on D-Bus System Message Bus Socket.
  572. [ OK ] Reached target Sockets.
  573. [ OK ] Started Daily apt activities.
  574. [ OK ] Reached target Timers.
  575. [ OK ] Reached target Paths.
  576. [ OK ] Reached target Basic System.
  577. Starting LSB: No Display Manager...
  578. Starting LSB: Starts and stops Wicd...
  579. Starting Permit User Sessions...
  580. Starting LSB: RPi-Monitor daemon...
  581. Starting LSB: RPi-Monitor sunxi-temp helper...
  582. Starting LSB: Starts LIRC daemon....
  583. Starting Save/Restore Sound Card State...
  584. Starting System Logging Service...
  585. [ OK ] Started D-Bus System Message Bus.
  586. Starting LSB: Load kernel modules needed to enable cpufreq scaling...
  587. Starting Login Service...
  588. Starting LSB: Armbian gathering informations about hardware...
  589. Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
  590. [ OK ] Started Regular background program processing daemon.
  591. [ OK ] Started System Logging Service.
  592. [ OK ] Started Permit User Sessions.
  593. [ OK ] Started Save/Restore Sound Card State.
  594. [ OK ] Started LSB: No Display Manager.
  595. [ OK ] Started LSB: RPi-Monitor sunxi-temp helper.
  596. [ OK ] Started LSB: Starts LIRC daemon..
  597. [ OK ] Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
  598. [ OK ] Started Login Service.
  599. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
  600. Starting LSB: set CPUFreq kernel parameters...
  601. [ OK ] Started LSB: set CPUFreq kernel parameters.
  602. Starting LSB: Set sysfs variables from /etc/sysfs.conf...
  603. [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
  604. [ OK ] Started LSB: Armbian gathering informations about hardware.
  605. [ OK ] Started Raise network interfaces.
  606. [ OK ] Reached target Network.
  607. [ OK ] Reached target Network is Online.
  608. Starting LSB: disk temperature monitoring daemon...
  609. Starting LSB: Advanced IEEE 802.11 management daemon...
  610. Starting LSB: Start NTP daemon...
  611. Starting OpenBSD Secure Shell server...
  612. Starting /etc/rc.local Compatibility...
  613. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
  614. [ OK ] Started /etc/rc.local Compatibility.
  615. [ OK ] Started LSB: disk temperature monitoring daemon.
  616. [ OK ] Started Serial Getty on ttyS0.
  617. [ OK ] Started Getty on tty1.
  618. [ OK ] Reached target Login Prompts.
  619. [ OK ] Started LSB: Start NTP daemon.
  620. [ OK ] Started LSB: RPi-Monitor daemon.
  621. [ OK ] Started OpenBSD Secure Shell server.
  622. [ OK ] Started LSB: Starts and stops Wicd.
  623. [ OK ] Reached target Multi-User System.
  624. [ OK ] Reached target Graphical Interface.
  625. Starting Update UTMP about System Runlevel Changes...
  626. [ OK ] Started Update UTMP about System Runlevel Changes.
  627.  
  628. Ubuntu 16.04 LTS bananapim2plus ttyS0
  629.  
  630. bananapim2plus login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!