API tools faq
paste
Guest User

Rampoos lateautum on miui 8

a guest
Nov 28th, 2016
52
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 64.88 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Initializing cgroup subsys cpuset
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Initializing cgroup subsys cpuacct
  5. [ 0.000000] Linux version 3.10.49-LateAutumn-Grey-ga83bc46 (iamsubhranil@BLACKSMITH) (gcc version 6.0.0 20160401 (experimental) (UBERTC-6.0.0) ) #0 SMP PREEMPT Tue Sep 20 19:13:08 DST 2016
  6. [ 0.000000] CPU: ARMv7 Processor [410fd030] revision 0 (ARMv7), cr=10c0387d
  7. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. [ 0.000000] Machine: Qualcomm Technologies, Inc. MSM 8916 (Flattened Device Tree), model: Qualcomm Technologies, Inc. MSM 8916 QRD SKUI
  9. [ 0.000000] cma: Found external_image__region@0, memory base 0x86000000, size 8 MiB, limit 0xffffffff
  10. [ 0.000000] cma: Found modem_adsp_region@0, memory base 0x86800000, size 86 MiB, limit 0xffffffff
  11. [ 0.000000] cma: Found pheripheral_region@0, memory base 0x8be00000, size 6 MiB, limit 0xffffffff
  12. [ 0.000000] cma: Found mba_region@0, memory base 0x00000000, size 2 MiB, limit 0xffffffff
  13. [ 0.000000] cma: Found secure_region@0, memory base 0x00000000, size 109 MiB, limit 0xffffffff
  14. [ 0.000000] cma: Found venus_qseecom_region@0, memory base 0x00000000, size 18 MiB, limit 0x90000000
  15. [ 0.000000] cma: Found audio_region@0, memory base 0x00000000, size 3 MiB, limit 0xffffffff
  16. [ 0.000000] cma: Found splash_region@83000000, memory base 0x83000000, size 20 MiB, limit 0xffffffff
  17. [ 0.000000] cma: Found pstore_reserve_region@0, memory base 0x8c400000, size 1 MiB, limit 0xffffffff
  18. [ 0.000000] cma: CMA: reserved 8 MiB at 0x86000000 for external_image_mem
  19. [ 0.000000] cma: CMA: reserved 86 MiB at 0x86800000 for modem_adsp_mem
  20. [ 0.000000] cma: CMA: reserved 6 MiB at 0x8be00000 for peripheral_mem
  21. [ 0.000000] cma: CMA: reserved 4 MiB at 0xbfc00000 for mba_mem
  22. [ 0.000000] cma: CMA: reserved 112 MiB at 0xb8c00000 for secure_mem
  23. [ 0.000000] cma: CMA: reserved 20 MiB at 0x8ec00000 for venus_qseecom_mem
  24. [ 0.000000] cma: CMA: reserved 4 MiB at 0xb8800000 for audio_mem
  25. [ 0.000000] cma: CMA: reserved 20 MiB at 0x83000000 for cont_splash_mem
  26. [ 0.000000] cma: CMA: reserved 1 MiB at 0x8c400000 for pstore_reserve_mem
  27. [ 0.000000] cma: CMA: reserved 8 MiB at 0xaf000000 for default region
  28. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  29. [ 0.000000] PERCPU: Embedded 12 pages/cpu @c2ae1000 s33216 r0 d15936 u49152
  30. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 234578
  31. [ 0.000000] Kernel command line: sched_enable_hmp=1 androidboot.hardware=qcom user_debug=30 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 androidboot.emmc=true androidboot.serialno=3a2b0757d02 ramoops_memreserve=2M androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_r61308_720p_video:1:none board_id=S88047C1:board_vol=1036448
  32. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  33. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  34. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  35. [ 0.000000] Memory: 740936K/945152K available (11606K kernel code, 1014K rwdata, 4300K rodata, 1088K init, 2158K bss, 204216K reserved, 147456K highmem)
  36. [ 0.000000] Virtual kernel memory layout:
  37. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  38. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  39. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  40. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  41. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  42. [ 0.000000] .text : 0xc0008000 - 0xc10888c4 (16899 kB)
  43. [ 0.000000] .init : 0xc1100000 - 0xc12101c0 (1089 kB)
  44. [ 0.000000] .data : 0xc1212000 - 0xc130fb08 (1015 kB)
  45. [ 0.000000] .bss : 0xc130fbcc - 0xc152b648 (2159 kB)
  46. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  47. [ 0.000000] HMP scheduling enabled.
  48. [ 0.000000] Preemptible hierarchical RCU implementation.
  49. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  50. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  51. [ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
  52. [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
  53. [ 0.000000] Switching to timer-based delay loop
  54. [ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696213963ns
  55. [ 0.000413] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  56. [ 0.000425] pid_max: default: 32768 minimum: 301
  57. [ 0.000585] Security Framework initialized
  58. [ 0.000597] SELinux: Initializing.
  59. [ 0.000686] Mount-cache hash table entries: 512
  60. [ 0.001538] Initializing cgroup subsys debug
  61. [ 0.001549] Initializing cgroup subsys freezer
  62. [ 0.001556] Initializing cgroup subsys bfqio
  63. [ 0.001587] CPU: Testing write buffer coherency: ok
  64. [ 0.001887] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  65. [ 0.001966] Setting up static identity map for 0xc0b9f290 - 0xc0b9f2e8
  66. [ 0.002762] ftrace: Allocated trace_printk buffers
  67. [ 0.003643] MSM Memory Dump base table set up
  68. [ 0.003665] MSM Memory Dump apps data table set up
  69. [ 0.005103] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  70. [ 0.006209] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  71. [ 0.010606] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  72. [ 0.010743] Brought up 4 CPUs
  73. [ 0.010764] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  74. [ 0.010770] CPU: All CPU(s) started in SVC mode.
  75. [ 0.022646] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 0
  76. [ 0.024473] pinctrl core: initialized pinctrl subsystem
  77. [ 0.024748] regulator-dummy: no parameters
  78. [ 0.028703] NET: Registered protocol family 16
  79. [ 0.031295] DMA: preallocated 256 KiB pool for atomic coherent allocations
  80. [ 0.069062] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
  81. [ 0.069254] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
  82. [ 0.073241] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
  83. [ 0.077011] cma: Assigned CMA region at 0 to 1de0000.qcom,venus device
  84. [ 0.077407] cma: Assigned CMA region at 0 to 4080000.qcom,mss device
  85. [ 0.077754] cma: Assigned CMA region at 0 to a21b000.qcom,pronto device
  86. [ 0.078306] ACC: mem_acc_efuse_init: efuse_addr = 0x00058000 (len=0x1000)
  87. [ 0.078344] ACC: mem_acc_fuse_is_setting_expected: [row:0] = 0x5c22000000d00705 @52:1 == 1 ?: no
  88. [ 0.078433] mem_acc_corner: 0 <--> 0 mV
  89. [ 0.081169] console [pstore0] enabled
  90. [ 0.081179] ramoops: attached 0x100000@0x8c400000, ecc: 0/0
  91. [ 0.083757] KPI: Bootloader start count = 24102
  92. [ 0.083769] KPI: Bootloader end count = 81806
  93. [ 0.083777] KPI: Bootloader display count = 75425
  94. [ 0.083784] KPI: Bootloader load kernel count = 2376
  95. [ 0.083793] KPI: Kernel MPM timestamp = 104799
  96. [ 0.083799] KPI: Kernel MPM Clock frequency = 32768
  97. [ 0.083820] socinfo_print: v8, id=206, ver=1.0, raw_id=1797, raw_ver=0, hw_plat=11, hw_plat_ver=65537
  98. [ 0.083820] accessory_chip=0, hw_plat_subtype=7, pmic_model=65547, pmic_die_revision=131072
  99. [ 0.084465] smd_channel_probe_worker: allocation table not initialized
  100. [ 0.084578] smd_channel_probe_worker: allocation table not initialized
  101. [ 0.089432] msm_mpm_dev_probe(): Cannot get clk resource for XO
  102. [ 0.089458] platform 601d0.qcom,mpm: Driver mpm-v2 requests probe deferral
  103. [ 0.090670] 8916_s1_corner: 0 <--> 0 mV at 0 mV normal idle
  104. [ 0.091023] 8916_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  105. [ 0.091345] 8916_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  106. [ 0.091700] 8916_s3: 1200 <--> 1300 mV at 1200 mV normal idle
  107. [ 0.092055] 8916_s4: 1800 <--> 2100 mV at 1800 mV normal idle
  108. [ 0.092393] 8916_l1: 1225 mV normal idle
  109. [ 0.092750] 8916_l2: 1200 mV normal idle
  110. [ 0.093092] 8916_l3: 500 <--> 1287 mV at 0 mV normal idle
  111. [ 0.093423] 8916_l3_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  112. [ 0.093815] 8916_l3_corner_so: 0 <--> 0 mV at 0 mV normal idle
  113. [ 0.094168] 8916_l4: 2050 mV normal idle
  114. [ 0.094535] 8916_l5: 1800 mV normal idle
  115. [ 0.094884] 8916_l6: 1800 mV normal idle
  116. [ 0.095250] 8916_l7: 1800 mV normal idle
  117. [ 0.095589] 8916_l7_ao: 1800 mV normal idle
  118. [ 0.095927] 8916_l7_so: 1800 mV normal idle
  119. [ 0.096301] 8916_l8: 2850 <--> 2900 mV at 2850 mV normal idle
  120. [ 0.096666] 8916_l9: 3300 mV normal idle
  121. [ 0.097038] 8916_l10: 2700 <--> 2800 mV at 2700 mV normal idle
  122. [ 0.097419] 8916_l11: 1800 <--> 3300 mV at 3000 mV normal idle
  123. [ 0.097780] 8916_l12: 1800 <--> 2950 mV at 1800 mV normal idle
  124. [ 0.098157] 8916_l13: 3075 mV normal idle
  125. [ 0.098540] 8916_l14: 1800 <--> 3300 mV at 1800 mV normal idle
  126. [ 0.098905] 8916_l15: 1800 <--> 3300 mV at 1800 mV normal idle
  127. [ 0.099795] 8916_l16: 2600 <--> 3300 mV at 2600 mV normal idle
  128. [ 0.100239] 8916_l17: 2850 mV normal idle
  129. [ 0.100613] 8916_l18: 2700 mV normal idle
  130. [ 0.101039] 8916_s2: 1050 <--> 1350 mV at 1150 mV
  131. [ 0.101149] spm_regulator_probe: name=8916_s2, range=LV, voltage=1150000 uV, mode=PWM, step rate=1200 uV/us
  132. [ 0.101737] cpr_efuse_init: apc_corner: efuse_addr = 0x00058000 (len=0x1000)
  133. [ 0.101780] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x210ae3877d, speed_bits = 0
  134. [ 0.101798] cpr_parse_pvs_version_fuse: apc_corner: [row: 0]: 0x5c22000000d00705, pvs_version = 0
  135. [ 0.101887] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1100000 1262500] uV
  136. [ 0.101898] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1150000 1350000] uV
  137. [ 0.101909] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1162500] uV
  138. [ 0.102119] cpr_init_cpr_efuse: apc_corner: [row:27] = 0xb08ec603b19940e9
  139. [ 0.102142] cpr_init_cpr_efuse: apc_corner: CPR disable fuse = 0
  140. [ 0.102156] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 945
  141. [ 0.102169] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 945
  142. [ 0.102181] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1283
  143. [ 0.102238] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.000
  144. [ 0.102248] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.324
  145. [ 0.102264] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 945
  146. [ 0.102273] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 945
  147. [ 0.102282] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 945
  148. [ 0.102291] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 945
  149. [ 0.102300] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 945
  150. [ 0.102309] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[6] = 1010
  151. [ 0.102317] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[7] = 1041
  152. [ 0.102326] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[8] = 1060
  153. [ 0.102335] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[9] = 1078
  154. [ 0.102344] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[10] = 1128
  155. [ 0.102353] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[11] = 1140
  156. [ 0.102362] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[12] = 1178
  157. [ 0.102370] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[13] = 1209
  158. [ 0.102380] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[14] = 1259
  159. [ 0.102388] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[15] = 1283
  160. [ 0.102439] cpr_populate_opp_table: apc_corner: adding OPP entry failed - OPP may not be enabled, rc=-22
  161. [ 0.102479] cpr_init_cpr_parameters: apc_corner: up threshold = 0, down threshold = 2
  162. [ 0.102506] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
  163. [ 0.102519] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
  164. [ 0.102781] apc_corner: 0 <--> 0 mV
  165. [ 0.103414] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
  166. [ 0.103502] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
  167. [ 0.103516] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
  168. [ 0.103538] platform 78b6000.i2c: Driver i2c-msm-v2 requests probe deferral
  169. [ 0.103633] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
  170. [ 0.103699] i2c-msm-v2 78b9000.i2c: error on clk_get(core_clk):-517
  171. [ 0.103712] i2c-msm-v2 78b9000.i2c: error probe() failed with err:-517
  172. [ 0.103731] platform 78b9000.i2c: Driver i2c-msm-v2 requests probe deferral
  173. [ 0.103881] i2c-msm-v2 78ba000.i2c: probing driver i2c-msm-v2
  174. [ 0.103951] i2c-msm-v2 78ba000.i2c: error on clk_get(core_clk):-517
  175. [ 0.103965] i2c-msm-v2 78ba000.i2c: error probe() failed with err:-517
  176. [ 0.103984] platform 78ba000.i2c: Driver i2c-msm-v2 requests probe deferral
  177. [ 0.104114] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
  178. [ 0.104180] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
  179. [ 0.104192] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
  180. [ 0.104209] platform 78b8000.i2c: Driver i2c-msm-v2 requests probe deferral
  181. [ 0.106279] msm-thermal qcom,msm-thermal.58: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
  182. [ 0.106299] msm-thermal qcom,msm-thermal.58: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
  183. [ 0.106315] msm-thermal qcom,msm-thermal.58: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
  184. [ 0.106332] msm-thermal qcom,msm-thermal.58: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
  185. [ 0.106350] msm-thermal qcom,msm-thermal.58: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
  186. [ 0.106637] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
  187. [ 0.107028] msm-thermal qcom,msm-thermal.58: probe_sensor_info:unable to find DT for sensor-information.KTM continues
  188. [ 0.107047] msm-thermal qcom,msm-thermal.58: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
  189. [ 0.107743] sps:sps is ready.
  190. [ 0.113268] qcom,rpmcc-8916 1800000.qcom,rpmcc: Registered RPM clocks.
  191. [ 0.120321] qcom,gcc-8916 1800000.qcom,gcc: Registered GCC clocks
  192. [ 0.122206] clock-a7 b011050.qcom,clock-a7: Speed bin: 0 PVS Version: 0
  193. [ 0.124401] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
  194. [ 0.124516] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  195. [ 0.124530] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  196. [ 0.125213] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
  197. [ 0.125334] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  198. [ 0.125347] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  199. [ 0.125744] i2c-msm-v2 78ba000.i2c: probing driver i2c-msm-v2
  200. [ 0.125833] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  201. [ 0.125845] i2c-msm-v2 78ba000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  202. [ 0.126262] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
  203. [ 0.126350] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  204. [ 0.126362] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  205. [ 0.153220] bio: create slab <bio-0> at 0
  206. [ 0.155588] SCSI subsystem initialized
  207. [ 0.156082] usbcore: registered new interface driver usbfs
  208. [ 0.156122] usbcore: registered new interface driver hub
  209. [ 0.156231] usbcore: registered new device driver usb
  210. [ 0.156324] media: Linux media interface: v0.10
  211. [ 0.156367] Linux video capture interface: v2.00
  212. [ 0.157717] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
  213. [ 0.157804] ION-heap mm: Cannot specify alignment for this type of heap
  214. [ 0.157894] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
  215. [ 0.158044] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
  216. [ 0.158189] cma: Assigned CMA region at 0 to 17.qcom,ion-heap device
  217. [ 0.158336] cma: Assigned CMA region at 0 to 1a.qcom,ion-heap device
  218. [ 0.158493] ION heap system created
  219. [ 0.158581] ION heap kmalloc created
  220. [ 0.158595] ION heap mm created at 0xb8c00000 with size 6d00000
  221. [ 0.158606] ION heap qsecom created at 0x8ec00000 with size 1200000
  222. [ 0.158617] ION heap audio created at 0xb8800000 with size 314000
  223. [ 0.158627] ION heap pil_1 created at 0x8be00000 with size 600000
  224. [ 0.158637] ION heap pil_2 created at 0x86800000 with size 5600000
  225. [ 0.158732] msm_bus_fabric_init_driver
  226. [ 0.158878] msm_bus_device 580000.ad-hoc-bus: Dev 1024
  227. [ 0.158891] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  228. [ 0.158899] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  229. [ 0.158959] msm_bus_device 580000.ad-hoc-bus: Dev 0
  230. [ 0.158972] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  231. [ 0.158979] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  232. [ 0.159036] msm_bus_device 580000.ad-hoc-bus: Dev 4096
  233. [ 0.159049] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  234. [ 0.159057] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  235. [ 0.161516] msm_bus_init_clk: Valid node clk node 1024 ctx 0
  236. [ 0.161523] msm_bus_init_clk: Valid node clk node 1024 ctx 1msm_bus_init_clk: Valid node clk node 0 ctx 0
  237. [ 0.161589] msm_bus_init_clk: Valid node clk node 0 ctx 1msm_bus_init_clk: Valid node clk node 4096 ctx 0
  238. [ 0.161643] msm_bus_init_clk: Valid node clk node 4096 ctx 1[ 0.166411] gdsc_venus: no parameters
  239. [ 0.166595] gdsc_mdss: no parameters
  240. [ 0.166738] gdsc_jpeg: no parameters
  241. [ 0.166894] gdsc_vfe: no parameters
  242. [ 0.167064] gdsc_oxili_gx: no parameters
  243. [ 0.167623] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
  244. [ 0.168182] dsi_pll_clock_register_lpm: Registered DSI PLL clocks successfully
  245. [ 0.168975] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at f02a0000, with 2 ctx banks
  246. [ 0.169521] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at f0780000, with 20 ctx banks
  247. [ 0.173429] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
  248. [ 0.173533] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
  249. [ 0.173614] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2
  250. [ 0.173685] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
  251. [ 0.173754] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
  252. [ 0.173827] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
  253. [ 0.173898] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
  254. [ 0.174004] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
  255. [ 0.174074] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
  256. [ 0.174148] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
  257. [ 0.174218] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
  258. [ 0.174287] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
  259. [ 0.174356] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
  260. [ 0.174424] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
  261. [ 0.174495] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
  262. [ 0.174564] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
  263. [ 0.174633] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
  264. [ 0.174706] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
  265. [ 0.174774] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
  266. [ 0.174847] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
  267. [ 0.174915] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
  268. [ 0.174986] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
  269. [ 0.175670] adreno_idler: version 1.1 by arter97
  270. [ 0.175734] Advanced Linux Sound Architecture Driver Initialized.
  271. [ 0.176136] Bluetooth: Core ver 2.16
  272. [ 0.176168] NET: Registered protocol family 31
  273. [ 0.176174] Bluetooth: HCI device and connection manager initialized
  274. [ 0.176184] Bluetooth: HCI socket layer initialized
  275. [ 0.176193] Bluetooth: L2CAP socket layer initialized
  276. [ 0.176209] Bluetooth: SCO socket layer initialized
  277. [ 0.176403] cfg80211: Calling CRDA to update world regulatory domain
  278. [ 0.176421] cfg80211: World regulatory domain updated:
  279. [ 0.176427] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  280. [ 0.176434] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  281. [ 0.176440] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  282. [ 0.176447] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  283. [ 0.176453] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  284. [ 0.176460] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  285. [ 0.176466] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  286. [ 0.176472] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  287. [ 0.176479] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  288. [ 0.177300] Switching to clocksource arch_sys_counter
  289. [ 0.195421] NET: Registered protocol family 2
  290. [ 0.195806] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  291. [ 0.195909] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  292. [ 0.196004] TCP: Hash tables configured (established 8192 bind 8192)
  293. [ 0.196044] TCP: reno registered
  294. [ 0.196054] UDP hash table entries: 512 (order: 2, 16384 bytes)
  295. [ 0.196079] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  296. [ 0.196254] NET: Registered protocol family 1
  297. [ 0.196506] RPC: Registered named UNIX socket transport module.
  298. [ 0.196514] RPC: Registered udp transport module.
  299. [ 0.196519] RPC: Registered tcp transport module.
  300. [ 0.196524] RPC: Registered tcp NFSv4.1 backchannel transport module.
  301. [ 0.196952] gcc-mdss-8916 qcom,gcc-mdss.29: Registered GCC MDSS clocks.
  302. [ 0.197709] Trying to unpack rootfs image as initramfs...
  303. [ 0.271999] Freeing initrd memory: 1624K (c2000000 - c2196000)
  304. [ 0.275159] hw perfevents: enabled with ARMv8 Cortex-A53 PMU driver, 7 counters available
  305. [ 0.277244] audit: initializing netlink socket (disabled)
  306. [ 0.277274] type=2000 audit(0.249:1): initialized
  307. [ 0.277799] bounce pool size: 64 pages
  308. [ 0.282148] NTFS driver 2.1.30 [Flags: R/W].
  309. [ 0.282311] fuse init (API version 7.23)
  310. [ 0.282727] msgmni has been set to 1221
  311. [ 0.284930] Key type asymmetric registered
  312. [ 0.284938] Asymmetric key parser 'x509' registered
  313. [ 0.285051] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  314. [ 0.285059] io scheduler noop registered (default)
  315. [ 0.285064] io scheduler deadline registered
  316. [ 0.285077] io scheduler row registered
  317. [ 0.285161] io scheduler cfq registered
  318. [ 0.285244] io scheduler bfq registered
  319. [ 0.285249] BFQ I/O-scheduler: v7r8
  320. [ 0.287111] platform qcom,smp2pgpio-ssr-smp2p-1-in.12: Driver smp2pgpio requests probe deferral
  321. [ 0.287235] platform qcom,smp2pgpio-ssr-smp2p-1-out.13: Driver smp2pgpio requests probe deferral
  322. [ 0.287968] platform qcom,smp2pgpio-ssr-smp2p-4-in.18: Driver smp2pgpio requests probe deferral
  323. [ 0.288089] platform qcom,smp2pgpio-ssr-smp2p-4-out.19: Driver smp2pgpio requests probe deferral
  324. [ 0.288592] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
  325. [ 0.288608] mdss_mdp_probe+0x15c/0x9ac->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
  326. [ 0.288619] mdss_mdp_parse_dt_hw_settings: MDSS VBIF settings not found
  327. [ 0.288644] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-pipe-cursor-off : doesn't exist in device tree
  328. [ 0.288682] mdss_mdp_pipe_addr_setup: type:1 ftchid:1 xinid:0 num:0 ndx:0x1 prio:0
  329. [ 0.288695] mdss_mdp_pipe_addr_setup: type:2 ftchid:7 xinid:1 num:3 ndx:0x8 prio:1
  330. [ 0.288702] mdss_mdp_pipe_addr_setup: type:2 ftchid:8 xinid:5 num:4 ndx:0x10 prio:2
  331. [ 0.288715] mdss_mdp_pipe_addr_setup: type:3 ftchid:4 xinid:2 num:6 ndx:0x40 prio:3
  332. [ 0.288735] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
  333. [ 0.288904] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
  334. [ 0.288914] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-cmd : u32 array read
  335. [ 0.288930] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-clk-levels : doesn't exist in device tree
  336. [ 0.288958] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-ad-off : doesn't exist in device tree
  337. [ 0.289287] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
  338. [ 0.290841] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
  339. [ 0.290950] mdss_dsi_panel_init: Panel Name = r61308_HD720p_video_AUO3.5
  340. [ 0.291311] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
  341. [ 0.291363] mdss_dsi_parse_panel_features: ulps feature disabled
  342. [ 0.291375] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
  343. [ 0.291384] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
  344. [ 0.291401] mdss_dsi_parse_panel_features:1452, Disp_en gpio not specified
  345. [ 0.291546] mdss_dsi_panel_init: Continuous splash enabled
  346. [ 0.291797] dsi_panel_device_register:1897, Disp_en gpio not specified
  347. [ 0.291809] dsi_panel_device_register:1905, TE gpio not specified
  348. [ 0.291820] dsi_panel_device_register: bklt_en gpio not specified
  349. [ 0.292062] mdss_dsi_pll_1_clk_init: can't find vco_clk. rc=-517
  350. [ 0.292068] PLL 1 Clock's did not register
  351. [ 0.292088] mdss_dsi_retrieve_ctrl_resources: ctrl_base=f00ee000 ctrl_size=25c phy_base=f0122500 phy_size=2b0
  352. [ 0.293233] mdss_register_panel: adding framebuffer device 1a98000.qcom,mdss_dsi
  353. [ 0.293428] mdss_hw_rev_init: MDP Rev=10060000
  354. [ 0.293826] mdss_dsi_status_init: DSI status check interval:5000
  355. [ 0.294148] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.24
  356. [ 0.294964] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
  357. [ 0.295241] mdss_fb_register: FrameBuffer[1] 1280x720 registered successfully!
  358. [ 0.295297] mdss_mdp_splash_parse_dt: splash mem child node is not present
  359. [ 0.296699] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
  360. [ 0.297745] msm_rpm_log_probe: OK
  361. [ 0.299019] NET: Registered protocol family 27
  362. [ 0.300622] In memshare_probe, Memshare probe success
  363. [ 0.302378] subsys-pil-tz a21b000.qcom,pronto: [wcnss]: Error getting proxy unvoting gpio
  364. [ 0.302423] platform a21b000.qcom,pronto: Driver subsys-pil-tz requests probe deferral
  365. [ 0.303747] pil-q6v5-mss 4080000.qcom,mss: [modem]: Error getting proxy unvoting gpio
  366. [ 0.303837] platform 4080000.qcom,mss: Driver pil-q6v5-mss requests probe deferral
  367. [ 0.312655] kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on
  368. [ 0.318399] brd: module loaded
  369. [ 0.320458] loop: module loaded
  370. [ 0.320780] zram: Created 1 device(s)
  371. [ 0.321108] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x800000
  372. [ 0.321131] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
  373. [ 0.321138] QSEECOM: qseecom_probe: Device does not support PFEQSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
  374. [ 0.321153] QSEECOM: qseecom_probe: qseecom.appsbl_qseecom_support = 0x0[ 0.321160] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
  375. [ 0.321461] QSEECOM: qseecom_probe: secure app region addr=0x86000000 size=0x300000
  376. [ 0.323014] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  377. [ 0.323022] i2c-core: driver [tabla-i2c-core] using legacy resume method
  378. [ 0.323101] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
  379. [ 0.323106] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
  380. [ 0.323185] i2c-core: driver [tasha-i2c-core] using legacy suspend method
  381. [ 0.323191] i2c-core: driver [tasha-i2c-core] using legacy resume method
  382. [ 0.323650] SCSI Media Changer driver v0.25
  383. [ 0.324496] sps: BAM device 0x07884000 is not registered yet.
  384. [ 0.324512] sps:BAM 0x07884000 is registered.
  385. [ 0.326680] sps:BAM 0x07884000 (va:0xf03c0000) enabled: ver:0x18, number of pipes:16
  386. [ 0.327953] tun: Universal TUN/TAP device driver, 1.6
  387. [ 0.327961] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  388. [ 0.329895] PPP generic driver version 2.4.2
  389. [ 0.329962] PPP BSD Compression module registered
  390. [ 0.329968] PPP Deflate Compression module registered
  391. [ 0.329983] PPP MPPE Compression module registered
  392. [ 0.329989] NET: Registered protocol family 24
  393. [ 0.330348] wcnss_wlan probed in built-in mode
  394. [ 0.330854] usbcore: registered new interface driver asix
  395. [ 0.330881] usbcore: registered new interface driver ax88179_178a
  396. [ 0.330905] usbcore: registered new interface driver cdc_ether
  397. [ 0.330929] usbcore: registered new interface driver dm9601
  398. [ 0.330952] usbcore: registered new interface driver net1080
  399. [ 0.330976] usbcore: registered new interface driver cdc_subset
  400. [ 0.331000] usbcore: registered new interface driver zaurus
  401. [ 0.331175] usbcore: registered new interface driver cdc_ncm
  402. [ 0.331483] msm_sharedmem: sharedmem_register_qmi: qmi init successful
  403. [ 0.331828] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
  404. [ 0.331916] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
  405. [ 0.332002] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
  406. [ 0.332083] msm_sharedmem: msm_sharedmem_probe: qcom,client-id property not found
  407. [ 0.332157] msm_sharedmem: msm_sharedmem_probe: Device created for client 'bimc'
  408. [ 0.332475] msm_otg 78d9000.usb: msm_otg probe
  409. [ 0.334876] msm_otg 78d9000.usb: OTG regs = f01e4000
  410. [ 0.336496] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  411. [ 0.336505] ehci-msm: Qualcomm On-Chip EHCI Host Controller
  412. [ 0.336786] Unable to get vbus_otg
  413. [ 0.336796] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
  414. [ 0.336814] platform msm_hsusb_host: Driver msm_hsusb_host requests probe deferral
  415. [ 0.336835] ehci-msm2: Qualcomm EHCI Host Controller
  416. [ 0.337279] ice40_spi_probe: ice40_spi_probe failed
  417. [ 0.337714] usbcore: registered new interface driver cdc_acm
  418. [ 0.337720] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  419. [ 0.337747] usbcore: registered new interface driver ccid_bridge
  420. [ 0.337824] ccid_bridge_init: success
  421. [ 0.337852] usbcore: registered new interface driver usb-storage
  422. [ 0.337873] usbcore: registered new interface driver ums-alauda
  423. [ 0.337894] usbcore: registered new interface driver ums-cypress
  424. [ 0.337916] usbcore: registered new interface driver ums-datafab
  425. [ 0.337937] usbcore: registered new interface driver ums-freecom
  426. [ 0.337958] usbcore: registered new interface driver ums-isd200
  427. [ 0.337979] usbcore: registered new interface driver ums-jumpshot
  428. [ 0.338004] usbcore: registered new interface driver ums-karma
  429. [ 0.338025] usbcore: registered new interface driver ums-onetouch
  430. [ 0.338047] usbcore: registered new interface driver ums-sddr09
  431. [ 0.338069] usbcore: registered new interface driver ums-sddr55
  432. [ 0.338090] usbcore: registered new interface driver ums-usbat
  433. [ 0.338163] usbcore: registered new interface driver usbserial
  434. [ 0.338185] usbcore: registered new interface driver qc_csvt
  435. [ 0.338208] usbserial: USB Serial support registered for qc_csvt
  436. [ 0.338238] usbcore: registered new interface driver usb_ehset_test
  437. [ 0.339826] mousedev: PS/2 mouse device common for all mice
  438. [ 0.339910] usbcore: registered new interface driver xpad
  439. [ 0.339938] usbcore: registered new interface driver usb_acecad
  440. [ 0.339965] usbcore: registered new interface driver aiptek
  441. [ 0.339992] usbcore: registered new interface driver gtco
  442. [ 0.340019] usbcore: registered new interface driver hanwang
  443. [ 0.340045] usbcore: registered new interface driver kbtab
  444. [ 0.340071] usbcore: registered new interface driver wacom
  445. [ 0.340188] input: dt2w_pwrkey as /devices/virtual/input/input0
  446. [ 0.340357] [doubletap2wake]: doubletap2wake_init done
  447. [ 0.341233] input: ft5x06_ts as /devices/soc.0/78b9000.i2c/i2c-5/5-0038/input/input1
  448. [ 0.577558] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0x9 (ok)
  449. [ 0.578289] ft5x06_ts 5-0038: Device ID = 0x14
  450. [ 0.578941] ft5x06_ts 5-0038: report rate = 90Hz
  451. [ 0.580632] ft5x06_ts 5-0038: Firmware version = 22.0.0
  452. [ 0.687519] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0xa (ok)
  453. [ 0.695889] input: MPU6050-accel as /devices/soc.0/78b6000.i2c/i2c-0/0-0068/input/input2
  454. [ 0.696069] input: gyroscope as /devices/soc.0/78b6000.i2c/i2c-0/0-0068/input/input3
  455. [ 0.696366] AKM compass driver: initialize.
  456. [ 0.696410] AKM compass driver: initialize.[ 0.779462] input: compass as /devices/virtual/input/input4
  457. [ 0.779766] akm09911 0-000c: successfully probed.
  458. [ 0.779953] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x2e MSTR_STS:0x0d1343c8 OPER:0x00000010
  459. [ 0.779986] compass 0-002e: yas_i2c_rxdata: transfer failed.
  460. [ 0.779991] yas537 i2c error
  461. [ 0.780003] compass: probe of 0-002e failed with error -107
  462. [ 0.780025] Driver ltr5590 init.
  463. [ 0.917802] ltr559_check_chip_id read the LTR559_MANUFAC_ID is 0x5
  464. [ 0.940689] ltr559_gpio_irq: INT No. 325
  465. [ 0.940808] input: light as /devices/soc.0/78b6000.i2c/i2c-0/0-0023/input/input5
  466. [ 0.940958] input: proximity as /devices/soc.0/78b6000.i2c/i2c-0/0-0023/input/input6
  467. [ 0.941009] ltr559_probe input device success.
  468. [ 1.078707] ltr559_ps_enable, report ABS_DISTANCE=far
  469. [ 1.078717] ltr559_ps_enable: enable=(1) OK
  470. [ 1.079473] ltr559_ps_enable: enable=(0) OK
  471. [ 1.080079] qcom,qpnp-rtc qpnp-rtc-4: rtc core: registered qpnp_rtc as rtc0
  472. [ 1.080256] i2c /dev entries driver
  473. [ 1.082178] platform 1d00000.qcom,vidc: Driver msm_vidc_v4l2 requests probe deferral
  474. [ 1.083087] msm_cci_probe: pdev ee309200 device id = -1
  475. [ 1.086683] msm_flash_lm3642_init entry
  476. [ 1.087263] msm_eeprom_parse_memory_map: pageen not needed
  477. [ 1.087279] msm_eeprom_parse_memory_map: pageen not needed
  478. [ 1.087295] msm_eeprom_parse_memory_map: pageen not needed
  479. [ 1.174246] msm_cci_init:781: hw_version = 0x10000008
  480. [ 1.381968] MSM-SENSOR-INIT msm_sensor_init_module:143 MSM_SENSOR_INIT_MODULE (null)
  481. [ 1.382729] g_sctrl[0] eda5ea00
  482. [ 1.382930] g_sctrl[1] eda5ec00[ 1.383277] MSM-CPP cpp_probe:2373 Bus master 0
  483. [ 1.397909] MSM-CPP cpp_init_hardware:921 CPP HW Version: 0x40010000
  484. [ 1.397919] MSM-CPP cpp_init_hardware:931 stream_cnt:0
  485. [ 1.400708] __msm_jpeg_init:1236] Jpeg Device id 0
  486. [ 1.434762] BQ2022A:bq2022a_read_bat_id: bat_module_id= a
  487. [ 1.434772] BQ2022A:bq2022a_probe: success!!
  488. [ 1.435211] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0xb (ok)
  489. [ 1.435844] smb1360_otg_vreg: no parameters
  490. [ 4.492673] SMB:smb1360_get_bat_character: batt_capacity_mah=2200 cc_soc_coeff=0x8373 fg_thermistor_c1_coeff=0x85d2
  491. [ 4.494095] smb1360-chg-fg 4-0014: SMB1360 revision=0x3 probe success! batt=1 usb=1 soc=11
  492. [ 4.512246] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
  493. [ 4.512375] device-mapper: req-crypt: dm-req-crypt successfully initalized.
  494. [ 4.512375]
  495. [ 4.512534] cpuidle: using governor ladder
  496. [ 4.512541] cpuidle: using governor menu
  497. [ 4.512565] sdhci: Secure Digital Host Controller Interface driver
  498. [ 4.512570] sdhci: Copyright(c) Pierre Ossman
  499. [ 4.512574] sdhci-pltfm: SDHCI platform and OF driver helper
  500. [ 4.515967] sdhci_msm 7824900.sdhci: host_use_default_qos = 1
  501. [ 4.515978] sdhci_msm 7824900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 3, qos type = 2
  502. [ 4.515985] sdhci_msm 7824900.sdhci: dma_latency = 2
  503. [ 4.515992] sdhci_msm 7824900.sdhci: dma_latency = 401
  504. [ 4.515999] sdhci_msm 7824900.sdhci: dma_latency = 701
  505. [ 4.516007] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
  506. [ 4.516014] sdhci_msm 7824900.sdhci: dma_latency = 200
  507. [ 4.516023] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
  508. [ 4.516030] sdhci_msm 7824900.sdhci: dma_latency = 200
  509. [ 4.516036] sdhci_msm 7824900.sdhci: Host using default pm_qos
  510. [ 4.516687] mmc0: no vqmmc regulator found
  511. [ 4.516698] mmc0: no vmmc regulator found
  512. [ 4.545565] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA
  513. [ 4.553139] sdhci_msm 7864900.sdhci: host_use_default_qos = 1
  514. [ 4.553150] sdhci_msm 7864900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 1, qos type = 2
  515. [ 4.553158] sdhci_msm 7864900.sdhci: dma_latency = 701
  516. [ 4.553166] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
  517. [ 4.553173] sdhci_msm 7864900.sdhci: dma_latency = 200
  518. [ 4.553181] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
  519. [ 4.553189] sdhci_msm 7864900.sdhci: dma_latency = 200
  520. [ 4.553196] sdhci_msm 7864900.sdhci: Host using default pm_qos
  521. [ 4.553702] mmc1: no vqmmc regulator found
  522. [ 4.553713] mmc1: no vmmc regulator found
  523. [ 4.583844] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA
  524. [ 4.584484] i2c-msm-v2 78ba000.i2c: msm_bus_scale_register_client(mstr-id:86):0xe (ok)
  525. [ 4.592222] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000
  526. [ 4.592239] qce 720000.qcedev: CE device = 0x0
  527. [ 4.592239] , IO base, CE = 0xf0740000
  528. [ 4.592239] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
  529. [ 4.592239] IO base BAM = 0x (null)
  530. [ 4.592239] BAM IRQ 239
  531. [ 4.592239] Engines Availability = 0x2010853
  532. [ 4.592264] sps:BAM 0x00704000 is registered.
  533. [ 4.592954] sps:BAM 0x00704000 (va:0xf0c40000) enabled: ver:0x25, number of pipes:8
  534. [ 4.593688] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
  535. [ 4.594093] qcedev: FIPS140-2 Known Answer Tests : Skipped
  536. [ 4.594915] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000
  537. [ 4.594928] qcrypto 720000.qcrypto: CE device = 0x0
  538. [ 4.594928] , IO base, CE = 0xf0c80000
  539. [ 4.594928] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
  540. [ 4.594928] IO base BAM = 0x (null)
  541. [ 4.594928] BAM IRQ 239
  542. [ 4.594928] Engines Availability = 0x2010853
  543. [ 4.596277] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
  544. [ 4.596797] qcrypto 720000.qcrypto: qcrypto-ecb-aes
  545. [ 4.596927] qcrypto 720000.qcrypto: qcrypto-cbc-aes
  546. [ 4.597035] qcrypto 720000.qcrypto: qcrypto-ctr-aes
  547. [ 4.597129] qcrypto 720000.qcrypto: qcrypto-ecb-des
  548. [ 4.597228] qcrypto 720000.qcrypto: qcrypto-cbc-des
  549. [ 4.597316] qcrypto 720000.qcrypto: qcrypto-ecb-3des
  550. [ 4.597446] msm_thermal:do_freq_control Limiting CPU0 max frequency to 1612800. Temp:60
  551. [ 4.597574] msm_thermal:do_freq_control Limiting CPU1 max frequency to 1612800. Temp:60
  552. [ 4.597592] msm_thermal:do_freq_control Limiting CPU2 max frequency to 1612800. Temp:60
  553. [ 4.597609] msm_thermal:do_freq_control Limiting CPU3 max frequency to 1612800. Temp:60
  554. [ 4.597672] qcrypto 720000.qcrypto: qcrypto-cbc-3des
  555. [ 4.597776] qcrypto 720000.qcrypto: qcrypto-xts-aes
  556. [ 4.597868] qcrypto 720000.qcrypto: qcrypto-sha1
  557. [ 4.597967] qcrypto 720000.qcrypto: qcrypto-sha256
  558. [ 4.598056] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
  559. [ 4.598155] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
  560. [ 4.598244] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
  561. [ 4.598343] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
  562. [ 4.598446] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
  563. [ 4.598536] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
  564. [ 4.598634] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
  565. [ 4.598723] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
  566. [ 4.598822] qcrypto 720000.qcrypto: qcrypto-aes-ccm
  567. [ 4.598913] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
  568. [ 4.598919] qcrypto: FIPS140-2 Known Answer Tests: Skipped
  569. [ 4.599232] hidraw: raw HID events driver (C) Jiri Kosina
  570. [ 4.600526] usbcore: registered new interface driver usbhid
  571. [ 4.600532] usbhid: USB HID core driver
  572. [ 4.600810] ashmem: initialized
  573. [ 4.601374] sps:BAM 0x078c4000 is registered.
  574. [ 4.601694] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'warm' boot
  575. [ 4.601714] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
  576. [ 4.601883] input: qpnp_pon as /devices/virtual/input/input7
  577. [ 4.603351] PMIC@SID0: PM8916 v2.0 options: 0, 2, 0, 0
  578. [ 4.604779] armbw-pm qcom,armbw-pm.31: BW HWmon governor registered.
  579. [ 4.605529] devfreq qcom,cpubw.30: Couldn't update frequency transition information.
  580. [ 4.606085] usbcore: registered new interface driver snd-usb-audio
  581. [ 4.606796] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
  582. [ 4.606820] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
  583. [ 4.615142] msm-pcm-lpa qcom,msm-pcm-lpa.39: msm_pcm_probe: dev name qcom,msm-pcm-lpa.39
  584. [ 4.615733] platform qcom,msm-voip-dsp.41: Driver msm-voip-dsp requests probe deferral
  585. [ 4.616028] platform qcom,msm-pcm-voice.42: Driver msm-pcm-voice requests probe deferral
  586. [ 4.619495] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
  587. [ 4.619518] msm8x16-asoc-wcd sound.68: default codec configured
  588. [ 4.621094] msm8x16-asoc-wcd sound.68: ASoC: platform (null) not registered
  589. [ 4.621123] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
  590. [ 4.621154] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
  591. [ 4.621648] u32 classifier
  592. [ 4.621655] Actions configured
  593. [ 4.621663] Netfilter messages via NETLINK v0.30.
  594. [ 4.621745] nf_conntrack version 0.5.0 (13995 buckets, 55980 max)
  595. [ 4.622084] ctnetlink v0.93: registering with nfnetlink.
  596. [ 4.622148] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  597. [ 4.622154] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  598. [ 4.622456] xt_time: kernel timezone is -0000
  599. [ 4.622693] ip_tables: (C) 2000-2006 Netfilter Core Team
  600. [ 4.622804] arp_tables: (C) 2002 David S. Miller
  601. [ 4.622837] TCP: bic registered
  602. [ 4.622843] TCP: cubic registered
  603. [ 4.622848] TCP: westwood registered
  604. [ 4.622853] TCP: htcp registered
  605. [ 4.622858] Initializing XFRM netlink socket
  606. [ 4.623129] NET: Registered protocol family 10
  607. [ 4.623707] mip6: Mobile IPv6
  608. [ 4.623734] ip6_tables: (C) 2000-2006 Netfilter Core Team
  609. [ 4.623837] sit: IPv6 over IPv4 tunneling driver
  610. [ 4.624200] NET: Registered protocol family 17
  611. [ 4.624221] NET: Registered protocol family 15
  612. [ 4.624294] Bridge firewalling registered
  613. [ 4.624303] Ebtables v2.0 registered
  614. [ 4.624461] Bluetooth: RFCOMM TTY layer initialized
  615. [ 4.624482] Bluetooth: RFCOMM socket layer initialized
  616. [ 4.624488] Bluetooth: RFCOMM ver 1.11
  617. [ 4.624494] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  618. [ 4.624499] Bluetooth: BNEP filters: protocol multicast
  619. [ 4.624510] Bluetooth: BNEP socket layer initialized
  620. [ 4.624515] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  621. [ 4.624525] Bluetooth: HIDP socket layer initialized
  622. [ 4.624552] l2tp_core: L2TP core driver, V2.0
  623. [ 4.624564] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  624. [ 4.624569] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
  625. [ 4.624584] l2tp_netlink: L2TP netlink interface
  626. [ 4.624607] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
  627. [ 4.624623] l2tp_debugfs: L2TP debugfs support
  628. [ 4.624629] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
  629. [ 4.627034] mmc0: BKOPS_EN bit = 0
  630. [ 4.627620] cma: Assigned CMA region at 0 to qcom,mba-mem.153 device
  631. [ 4.629843] msm_otg 78d9000.usb: phy_reset: success
  632. [ 4.629993] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
  633. [ 4.630029] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
  634. [ 4.631687] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
  635. [ 4.631709] msm8x16-asoc-wcd sound.68: default codec configured
  636. [ 4.633394] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
  637. [ 4.633422] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
  638. [ 4.633452] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
  639. [ 4.633502] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
  640. [ 4.633534] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
  641. [ 4.634322] Registering SWP/SWPB emulation handler
  642. [ 4.634888] mako_hotplug: init
  643. [ 4.643652] mmc0: new HS200 MMC card at address 0001
  644. [ 4.643921] mmcblk0: mmc0:0001 H8G2d 7.28 GiB
  645. [ 4.644022] mmcblk0rpmb: mmc0:0001 H8G2d partition 3 4.00 MiB
  646. [ 4.645965] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30
  647. [ 4.720142] msm_hotplug: Device init
  648. [ 4.720343] mem_acc_corner: disabling
  649. [ 4.720354] regulator-dummy: disabling
  650. [ 4.720691] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
  651. [ 4.720713] msm8x16-asoc-wcd sound.68: default codec configured
  652. [ 4.722453] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
  653. [ 4.722480] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
  654. [ 4.722513] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
  655. [ 4.722579] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
  656. [ 4.722611] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
  657. [ 4.723733] file system registered
  658. [ 4.723777] mbim_init: initialize 1 instances
  659. [ 4.723825] mbim_init: Initialized 1 ports
  660. [ 4.723831] mbim_bam_setup: no_ports:1
  661. [ 4.723927] mbim_bam_setup: Initialized 1 ports
  662. [ 4.724661] rndis_qc_init: initialize rndis QC instance
  663. [ 4.724975] android_usb gadget: Mass Storage Function, version: 2009/09/11
  664. [ 4.724982] android_usb gadget: Number of LUNs=3
  665. [ 4.724989] lun0: LUN: removable file: (no medium)
  666. [ 4.724995] lun1: LUN: read only CD-ROM file: (no medium)
  667. [ 4.725001] lun2: LUN: removable file: (no medium)
  668. [ 4.725257] android_usb gadget: android_usb ready
  669. [ 4.725268] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 16
  670. [ 4.725701] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
  671. [ 4.725721] msm8x16-asoc-wcd sound.68: default codec configured
  672. [ 4.727087] input: gpio-keys as /devices/soc.0/gpio_keys.63/input/input8
  673. [ 4.727571] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
  674. [ 4.727601] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
  675. [ 4.727627] qcom,qpnp-rtc qpnp-rtc-4: setting system clock to 1970-01-01 01:41:00 UTC (6060)
  676. [ 4.727636] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
  677. [ 4.727705] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
  678. [ 4.727743] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
  679. [ 4.728093] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
  680. [ 4.728111] msm8x16-asoc-wcd sound.68: default codec configured
  681. [ 4.729294] msm_thermal:interrupt_mode_init Interrupt mode init
  682. [ 4.729308] msm_thermal:disable_msm_thermal Max frequency reset for CPU0
  683. [ 4.729478] msm_thermal:disable_msm_thermal Max frequency reset for CPU1
  684. [ 4.729518] msm_thermal:disable_msm_thermal Max frequency reset for CPU2
  685. [ 4.729571] msm_thermal:disable_msm_thermal Max frequency reset for CPU3
  686. [ 4.729912] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
  687. [ 4.729939] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
  688. [ 4.729971] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
  689. [ 4.730630] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster
  690. [ 4.731482] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
  691. [ 4.731525] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
  692. [ 4.731889] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
  693. [ 4.731911] msm8x16-asoc-wcd sound.68: default codec configured
  694. [ 4.733477] led_gpio_flash_probe:probe successfully!
  695. [ 4.733747] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
  696. [ 4.733775] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
  697. [ 4.733806] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
  698. [ 4.733879] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
  699. [ 4.733915] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
  700. [ 4.734239] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
  701. [ 4.734258] msm8x16-asoc-wcd sound.68: default codec configured
  702. [ 4.735056] qcom,cc-debug-8916 1874000.qcom,cc-debug: Registered Debug Mux successfully
  703. [ 4.735963] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
  704. [ 4.735989] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
  705. [ 4.736022] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
  706. [ 4.736102] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
  707. [ 4.736139] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
  708. [ 4.736476] clock_late_init: Removing enables held for handed-off clocks
  709. [ 4.736494] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
  710. [ 4.736513] msm8x16-asoc-wcd sound.68: default codec configured
  711. [ 4.738434] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
  712. [ 4.738459] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
  713. [ 4.738491] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
  714. [ 4.739390] ALSA device list:
  715. [ 4.739397] No soundcards found.
  716. [ 4.739565] Warning: unable to open an initial console.
  717. [ 4.739635] Freeing unused kernel memory: 64K (c1200000 - c1210000)
  718. [ 4.750474] SELinux: Permission module_load in class system not defined in policy.
  719. [ 4.750811] SELinux: the above unknown classes and permissions will be denied
  720. [ 4.816477] type=1403 audit(6060.569:2): policy loaded auid=4294967295 ses=4294967295
  721. [ 4.837279] mmc1: new ultra high speed DDR50 SDHC card at address aaaa
  722. [ 4.837660] mmcblk1: mmc1:aaaa SL32G 29.7 GiB
  723. [ 4.856348] mmcblk1: p1
  724. [ 4.856737] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
  725. [ 4.856777] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
  726. [ 4.857148] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
  727. [ 4.857170] msm8x16-asoc-wcd sound.68: default codec configured
  728. [ 4.858988] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
  729. [ 4.859015] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
  730. [ 4.859049] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
  731. [ 4.869601] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
  732. [ 4.869619] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
  733. [ 4.975441] init: /init.qcom.rc: 531: user option requires a user id
  734. [ 4.979017] init: init.qcom.factory.rc: 40: ignored duplicate definition of service 'bms-sh'
  735. [ 4.979577] init: /init.miui.rc: 24: ignored duplicate definition of service 'mdbd'
  736. [ 4.982122] init: invalid uid 'fm_radio'
  737. [ 5.389769] mmc0: Starting deferred resume
  738. [ 5.477374] mmc0: Deferred resume completed
  739. [ 5.481235] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1,discard
  740. [ 5.481370] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/system,target=/system,type=ext4)=0
  741. [ 5.482041] fs_mgr: nr_sec is 11599839 fs_size_sec is 11599792 blk_device is /dev/block/bootdevice/by-name/userdata
  742. [ 5.482379] EXT4-fs (mmcblk0p30): Ignoring removed nomblk_io_submit option
  743. [ 5.554601] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  744. [ 5.554675] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/userdata,/data,ext4)=0
  745. [ 5.555914] fs_mgr: Not running /sbin/e2fsck on /dev/block/bootdevice/by-name/userdata (executable not in system image)
  746. [ 5.559439] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,discard
  747. [ 5.559501] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=0
  748. [ 5.563617] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: barrier=1
  749. [ 5.566243] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: barrier=1
  750. [ 5.671928] init: Warning! Service checkpath needs a SELinux domain defined; please fix!
  751. [ 5.677487] init_hook_E: Could not find /cust/cust_variant and /data/miui/cust_variant
  752. [ 5.682559] init_hook_I: cust prop white key: persist.sys.timezone
  753. [ 5.682578] init_hook_I: cust prop white key: ro.carrier.name
  754. [ 5.682590] init_hook_I: cust prop white key: ro.miui.cust_variant
  755. [ 5.682602] init_hook_I: cust prop white key: ro.miui.region
  756. [ 5.682613] init_hook_I: cust prop white key: ro.product.locale.language
  757. [ 5.682625] init_hook_I: cust prop white key: ro.product.locale.region
  758. [ 5.682636] init_hook_I: cust prop white key: ro.miui.mcc
  759. [ 5.682647] init_hook_I: cust prop white key: ro.miui.mnc
  760. [ 5.682658] init_hook_I: cust prop white key: ro.com.android.mobiledata
  761. [ 5.682690] init_hook_I: cust prop white key: ro.build.hardware.version
  762. [ 5.682731] init: load_properties_from_file: /data/miui/cts.prop failed!
  763. [ 5.682772] init: load_properties_from_file: /system/etc/.prop failed!
  764. [ 5.691941] init: load_properties_from_file: /system/vendor/vendor.prop failed!
  765. [ 5.691973] init: load_properties_from_file: /system/vendor/power.prop failed!
  766. [ 5.692766] init: load_properties_from_file: /system/default.prop failed!
  767. [ 5.692796] init: load_properties_from_file: /vendor/build.prop failed!
  768. [ 5.692817] init: load_properties_from_file: /factory/factory.prop failed!
  769. [ 5.692951] init: Detected MSM SOC ID=206 SOC VER=65537 BOARD TYPE=QRD
  770. [ 5.693294] init: failed to open '/sys/class/graphics/fb2/msm_fb_type'
  771. [ 5.693535] init: load_properties_from_file: /data/miui/cts.prop failed!
  772. [ 5.736571] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
  773. [ 5.736592] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
  774. [ 5.736613] init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}'
  775. [ 5.736626] init: cannot expand '${persist.sys.mba_boot_timeout}' while writing to '/sys/module/pil_msa/parameters/pbl_mba_boot_timeout_ms'
  776. [ 5.736645] init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
  777. [ 5.736658] init: cannot expand '${persist.sys.modem_auth_timeout}' while writing to '/sys/module/pil_msa/parameters/modem_auth_timeout_ms'
  778. [ 5.736675] init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}'
  779. [ 5.736688] init: cannot expand '${persist.sys.pil_proxy_timeout}' while writing to '/sys/module/peripheral_loader/parameters/proxy_timeout_ms'
  780. [ 5.738419] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x86800000 to 0x8b900000
  781. [ 5.742889] pil-q6v5-mss 4080000.qcom,mss: MBA: loading from 0xbfc00000 to 0xbfd00000
  782. [ 5.781077] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
  783. [ 5.857409] mmc1: Starting deferred resume
  784. [ 6.031050] mmc1: Deferred resume completed
  785. [ 6.433484] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
  786. [ 6.538000] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
  787. [ 6.538043] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
  788. [ 6.538282] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
  789. [ 6.538306] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
  790. [ 6.538345] memshare: Modem Restart has happened
  791. [ 6.538841] M-Notify: General: 7
  792. [ 6.538875] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
  793. [ 6.538896] msm8x16-asoc-wcd sound.68: default codec configured
  794. [ 6.540643] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
  795. [ 6.540669] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
  796. [ 6.540703] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
  797. [ 6.787898] binder: 215:215 transaction failed 29189, size 0-0
  798. [ 6.816311] logd.auditd: start
  799. [ 6.896177] init: cannot find '/system/bin/fpcd', disabling 'fpcd'
  800. [ 6.902633] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
  801. [ 6.914218] init: cannot find '/system/bin/cnss_diag', disabling 'cnss_diag'
  802. [ 6.916018] init: cannot find '/system/bin/qrngd', disabling 'qrngd'
  803. [ 6.918018] init: cannot find '/system/bin/dts_configurator', disabling 'dts_configurator'
  804. [ 6.918354] init: Warning! Service zygote needs a SELinux domain defined; please fix!
  805. [ 6.919552] init: Warning! Service su_daemon needs a SELinux domain defined; please fix!
  806. [ 6.919895] init: cannot find '/bin/otad', disabling 'otad'
  807. [ 6.935731] init: cannot find '/system/vendor/bin/RIDLClient.exe', disabling 'RIDL'
  808. [ 6.943751] enable_store: android_usb: already disabled
  809. [ 6.945966] init: Warning! Service checksdkpath needs a SELinux domain defined; please fix!
  810. [ 7.017083] audit: audit_lost=1 audit_rate_limit=5 audit_backlog_limit=64
  811. [ 7.017100] audit: rate limit exceeded
  812. [ 7.179294] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
  813. [ 7.184360] handle_qmi_request: Error getting req_desc for msg_id 36
  814. [ 7.184402] mem_share_svc_recv_msg: Error receiving message
  815. [ 7.186949] msm-pcm-routing qcom,msm-pcm-routing.37: Control not supported for path HFP_AUX_UL_HL -> [NULL] -> INTHFP_UL_HL
  816. [ 7.186970] msm-pcm-routing qcom,msm-pcm-routing.37: ASoC: Failed to add route HFP_AUX_UL_HL -> NULL -> INTHFP_UL_HL
  817. [ 7.186996] msm-pcm-routing qcom,msm-pcm-routing.37: Control not supported for path HFP_INT_UL_HL -> [NULL] -> INTHFP_UL_HL
  818. [ 7.187007] msm-pcm-routing qcom,msm-pcm-routing.37: ASoC: Failed to add route HFP_INT_UL_HL -> NULL -> INTHFP_UL_HL
  819. [ 7.187559] msm-pcm-routing qcom,msm-pcm-routing.37: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
  820. [ 7.187574] msm-pcm-routing qcom,msm-pcm-routing.37: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
  821. [ 7.191992] diag: In diag_dci_write_proc, invalid data 0xedf54000, peripheral: 0, len: 527
  822. [ 7.215839] wcd-spmi-core msm8x16_wcd_codec-13: Error: regulator not found
  823. [ 7.256271] octvm: [296]: /system/bin/mcd init 4
  824. [ 7.256876] octvm: mount cgroup memory subsys failed: No such file or directory
  825. [ 7.259856] init: untracked pid 275 exited with status 0
  826. [ 7.372880] init: cannot find '/system/bin/ipacm-diag', disabling 'ipacm-diag'
  827. [ 7.394412] QSEECOM: qseecom_load_app: App (keymaste) does'nt exist, loading apps for first time
  828. [ 7.401274] init: cannot find '/system/bin/ipacm', disabling 'ipacm'
  829. [ 7.411660] QSEECOM: qseecom_load_app: App with id 3 (keymaste) now loaded
  830. [ 7.791550] healthd: battery l=11 v=3655 t=32.0 h=2 st=2 c=313 chg=
  831. [ 8.029861] MSM-SENSOR-INIT msm_sensor_init_subdev_ioctl:126 default
  832. [ 8.029861]
  833. [ 8.030780] MSM-SENSOR-INIT msm_sensor_init_subdev_ioctl:126 default
  834. [ 8.030780]
  835. [ 8.031893] MSM-SENSOR-INIT msm_sensor_init_subdev_ioctl:126 default
  836. [ 8.031893]
  837. [ 8.032034] MSM-SENSOR-INIT msm_sensor_init_subdev_ioctl:126 default
  838. [ 8.032034]
  839. [ 8.032295] msm_cci_release invalid ref count 0 / cci state 1
  840. [ 8.032305] msm_sensor_cci_i2c_util line 496 rc = -22
  841. [ 8.032311] msm_actuator_close:828 cci_init failed
  842. [ 8.039640] init: untracked pid 548 exited with status 0
  843. [ 8.039787] msm_vfe40_init_qos_parms: NO D/S entries found
  844. [ 8.039798] msm_vfe40_init_vbif_parms: NO VBIF entries found
  845. [ 8.073975] MSM-CPP cpp_init_hardware:931 stream_cnt:0
  846. [ 8.390975] diag: In diag_process_smd_read_data, diag_device_write error: -19
  847. [ 8.441851] MSM-SENSOR-INIT msm_sensor_init_subdev_ioctl:126 default
  848. [ 8.441851]
  849. [ 8.508880] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
  850. [ 8.510065] msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
  851. [ 8.510098] APR: Wrong parameters
  852. [ 8.510105] adm_get_params_v2: Failed to Get Params on port_id 0x0 -22
  853. [ 8.510111] msm_dolby_dap_param_visualizer_control_get: get parameters failed
  854. [ 8.521896] msm_pcm_volume_ctl_get substream runtime not found
  855. [ 8.521966] msm_pcm_volume_ctl_get substream runtime not found
  856. [ 8.522146] msm_pcm_volume_ctl_get substream runtime not found
  857. [ 8.522208] msm_pcm_volume_ctl_get substream runtime not found
  858. [ 8.522299] msm_pcm_volume_ctl_get substream runtime not found
  859. [ 8.581071] audio_cal_shared_ioctl: cal type size 16 is Invalid! Max is 0!
  860. [ 8.582000] audio_cal_shared_ioctl: cal type size 16 is Invalid! Max is 0!
  861. [ 8.584295] msm_ds2_dap_set_security_control: dmid 0 license key 0
  862. [ 8.584316] core_set_license: Invalid cal block to send
  863. [ 8.584602] wcdcal_hwdep_ioctl_shared: codec didn't set this 0!!
  864. [ 8.584659] wcdcal_hwdep_ioctl_shared: codec didn't set this 1!!
  865. [ 8.625158] init: untracked pid 301 exited with status 1
  866. [ 8.733944] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
  867. [ 8.735216] msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
  868. [ 8.735325] adm_callback: cmd = 0x1032a returned error = 0x2
  869. [ 8.735338] adm_callback: ADM get param error = 2, resuming
  870. [ 8.848659] init: untracked pid 631 exited with status 1
  871. [ 9.727385] adm_get_params_v2: get params timed out port_id = 0x0
  872. [ 9.727400] msm_dolby_dap_param_visualizer_control_get: get parameters failed
  873. [ 9.742766] msm_pcm_volume_ctl_get substream runtime not found
  874. [ 9.742834] msm_pcm_volume_ctl_get substream runtime not found
  875. [ 9.743027] msm_pcm_volume_ctl_get substream runtime not found
  876. [ 9.743090] msm_pcm_volume_ctl_get substream runtime not found
  877. [ 9.743168] msm_pcm_volume_ctl_get substream runtime not found
  878. [ 9.751426] init: untracked pid 693 exited with status 1
  879. [ 9.760332] audio_cal_shared_ioctl: cal type size 16 is Invalid! Max is 0!
  880. [ 9.761654] audio_cal_shared_ioctl: cal type size 16 is Invalid! Max is 0!
  881. [ 9.978582] init: untracked pid 826 exited with status 1
  882. [ 12.674161] init: Warning! Service SensorCali needs a SELinux domain defined; please fix!
  883. [ 12.950112] wcnss: no space available for smd frame
  884. [ 12.977489] wcnss: no space available for smd frame
  885. [ 13.007416] wcnss: no space available for smd frame
  886. [ 13.037410] wcnss: no space available for smd frame
  887. [ 37.458181] init: Warning! Service usb_uicc_enable needs a SELinux domain defined; please fix!
  888. [ 47.857103] init: Warning! Service zygote needs a SELinux domain defined; please fix!
  889. [ 47.865968] init: Warning! Service checksdkpath needs a SELinux domain defined; please fix!
  890. [ 47.889144] octvm: [2549]: /system/bin/mcd init 4
  891. [ 47.890566] audit: audit_lost=25 audit_rate_limit=5 audit_backlog_limit=64
  892. [ 47.890576] audit: rate limit exceeded
  893. [ 47.890703] octvm: mount cgroup memory subsys failed: No such file or directory
  894. [ 48.198999] MSM-SENSOR-INIT msm_sensor_init_subdev_ioctl:126 default
  895. [ 48.198999]
  896. [ 48.241822] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
  897. [ 48.245646] msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
  898. [ 48.245796] adm_callback: cmd = 0x1032a returned error = 0x2
  899. [ 48.245806] adm_callback: ADM get param error = 2, resuming
  900. [ 49.237447] adm_get_params_v2: get params timed out port_id = 0x0
  901. [ 49.237463] msm_dolby_dap_param_visualizer_control_get: get para
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!