Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-69-generic] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Device Model: TOSHIBA MK5061GSY
- Serial Number: 411DT26AT
- LU WWN Device Id: 5 000039 331600490
- Firmware Version: MC000D
- User Capacity: 500,107,862,016 bytes [500 GB]
- Sector Size: 512 bytes logical/physical
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: 8
- ATA Standard is: Exact ATA specification draft version not indicated
- Local Time is: Sun Oct 5 22:49:12 2014 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: FAILED!
- Drive failure expected in less than 24 hours. SAVE ALL DATA.
- See vendor-specific Attribute list for failed Attributes.
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 120) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 133) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 128
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
- 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1660
- 5 Reallocated_Sector_Ct 0x0033 001 001 050 Pre-fail Always FAILING_NOW 2047
- 9 Power_On_Hours 0x0032 065 065 000 Old_age Always - 858544
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1744
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 32
- 192 Power-Off_Retract_Count 0x0032 097 097 000 Old_age Always - 1614
- 193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 18223
- 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 49 (Min/Max 8/64)
- 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 156558023
- 200 Multi_Zone_Error_Rate 0x0032 100 100 000 Old_age Always - 1612531319
- 240 Head_Flying_Hours 0x0032 055 055 000 Old_age Always - 1088367
- 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 24322730441
- 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 30653206433
- 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 1573
- SMART Error Log Version: 1
- ATA Error Count: 123 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 123 occurred at disk power-on lifetime: 14285 hours (595 days + 5 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 04 51 00 f7 7b cd e0 Error: ABRT at LBA = 0x00cd7bf7 = 13466615
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 35 00 18 e0 7b cd e0 00 3d+06:22:59.753 WRITE DMA EXT
- 35 00 18 c0 7b cd e0 00 3d+06:22:59.745 WRITE DMA EXT
- 35 00 08 80 78 cd e0 00 3d+06:22:59.702 WRITE DMA EXT
- 35 00 08 18 78 cd e0 00 3d+06:22:59.694 WRITE DMA EXT
- 35 00 10 00 78 cd e0 00 3d+06:22:59.644 WRITE DMA EXT
- Error 122 occurred at disk power-on lifetime: 14284 hours (595 days + 4 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 04 51 00 d7 7b cd e0 Error: ABRT at LBA = 0x00cd7bd7 = 13466583
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 35 00 18 c0 7b cd e0 00 3d+05:23:24.012 WRITE DMA EXT
- 35 00 08 80 78 cd e0 00 3d+05:23:23.970 WRITE DMA EXT
- 35 00 08 18 78 cd e0 00 3d+05:23:23.961 WRITE DMA EXT
- 35 00 10 00 78 cd e0 00 3d+05:23:23.831 WRITE DMA EXT
- 35 00 08 00 78 0d e0 00 3d+05:23:23.822 WRITE DMA EXT
- Error 121 occurred at disk power-on lifetime: 14273 hours (594 days + 17 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 04 51 00 07 14 cd e0 Error: ABRT at LBA = 0x00cd1407 = 13440007
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 35 00 08 00 14 cd e0 00 2d+17:40:47.167 WRITE DMA EXT
- 35 00 00 68 a6 01 e0 00 2d+17:40:47.148 WRITE DMA EXT
- 35 00 10 40 0a e0 e0 00 2d+17:40:47.140 WRITE DMA EXT
- 35 00 08 20 0a e0 e0 00 2d+17:40:47.124 WRITE DMA EXT
- 35 00 08 40 03 d5 e0 00 2d+17:40:46.075 WRITE DMA EXT
- Error 120 occurred at disk power-on lifetime: 14273 hours (594 days + 17 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 04 51 00 07 15 cd e0 Error: ABRT at LBA = 0x00cd1507 = 13440263
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 35 00 08 00 14 cd e0 00 2d+17:28:02.095 WRITE DMA EXT
- 35 00 80 e8 a6 01 e0 00 2d+17:28:02.076 WRITE DMA EXT
- 35 00 10 40 0a e0 e0 00 2d+17:28:02.068 WRITE DMA EXT
- 35 00 08 20 0a e0 e0 00 2d+17:28:02.053 WRITE DMA EXT
- 35 00 08 28 e0 d4 e0 00 2d+17:27:57.074 WRITE DMA EXT
- Error 119 occurred at disk power-on lifetime: 14272 hours (594 days + 16 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 04 51 00 87 14 cd e0 Error: ABRT at LBA = 0x00cd1487 = 13440135
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 35 00 88 00 14 cd e0 00 2d+16:52:55.112 WRITE DMA EXT
- ef 10 02 00 00 00 a0 00 2d+16:52:55.112 SET FEATURES [Reserved for Serial ATA]
- 27 00 00 00 00 00 e0 00 2d+16:52:55.112 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 a0 00 2d+16:52:55.111 IDENTIFY DEVICE
- ef 03 44 00 00 00 a0 00 2d+16:52:55.111 SET FEATURES [Set transfer mode]
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 13888 -
- # 2 Short offline Completed without error 00% 13461 -
- # 3 Extended offline Completed without error 00% 13024 -
- # 4 Short offline Completed without error 00% 13022 -
- # 5 Short offline Completed without error 00% 11006 -
- # 6 Short offline Completed without error 00% 10627 -
- # 7 Short offline Completed without error 00% 10165 -
- # 8 Short offline Completed without error 00% 9723 -
- # 9 Short offline Completed without error 00% 9222 -
- #10 Short offline Completed without error 00% 8888 -
- #11 Short offline Completed without error 00% 8411 -
- #12 Short offline Completed without error 00% 8176 -
- #13 Short offline Completed without error 00% 7792 -
- #14 Short offline Completed without error 00% 7695 -
- #15 Short offline Completed without error 00% 7139 -
- #16 Short offline Completed without error 00% 4128 -
- #17 Short offline Completed without error 00% 3587 -
- #18 Short offline Completed without error 00% 3225 -
- #19 Short offline Completed without error 00% 2829 -
- #20 Short offline Completed without error 00% 2828 -
- #21 Short offline Completed without error 00% 2485 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement