Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.239740] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
- [ 0.239995] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.239995] TCP reno registered
- [ 0.239995] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.239995] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.239995] NET: Registered protocol family 1
- [ 0.239995] pci 0000:01:00.0: Boot video device
- [ 0.239995] PCI: CLS 0 bytes, default 64
- [ 0.239995] Trying to unpack rootfs image as initramfs...
- [ 2.152351] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
- [ 2.152358] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
- [ 2.152364] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
- [ 2.156571] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
- [ 2.156756] Scanning for low memory corruption every 60 seconds
- [ 2.156892] audit: initializing netlink socket (disabled)
- [ 2.156906] type=2000 audit(1042417633.149:1): initialized
- [ 2.170551] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 2.171926] VFS: Disk quotas dquot_6.5.2
- [ 2.171981] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 2.172567] fuse init (API version 7.14)
- [ 2.172649] msgmni has been set to 957
- [ 2.172909] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 2.172913] io scheduler noop registered
- [ 2.172915] io scheduler deadline registered
- [ 2.172952] io scheduler cfq registered (default)
- [ 2.173117] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 2.173136] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 2.173309] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 2.173315] ACPI: Power Button [PWRB]
- [ 2.173372] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 2.173375] ACPI: Power Button [PWRF]
- [ 2.173870] ACPI: acpi_idle registered with cpuidle
- [ 2.173894] ACPI: processor limited to max C-state 1
- [ 2.177799] ERST: Table is not found!
- [ 2.177918] Linux agpgart interface v0.103
- [ 2.177923] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 2.178015] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 2.178095] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- [ 2.178339] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 2.178443] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- [ 2.179510] brd: module loaded
- [ 2.180055] loop: module loaded
- [ 2.180352] pata_acpi 0000:00:08.0: power state changed by ACPI to D0
- [ 2.180388] pata_acpi 0000:00:08.0: power state changed by ACPI to D0
- [ 2.180438] pata_acpi 0000:00:08.0: setting latency timer to 64
- [ 2.180879] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
- [ 2.180884] alloc irq_desc for 23 on node 0
- [ 2.180887] alloc kstat_irqs on node 0
- [ 2.180899] pata_acpi 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, high) -> IRQ 23
- [ 2.180926] pata_acpi 0000:00:09.0: setting latency timer to 64
- [ 2.180932] pata_acpi 0000:00:09.0: PCI INT A disabled
- [ 2.181325] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
- [ 2.181328] alloc irq_desc for 22 on node 0
- [ 2.181329] alloc kstat_irqs on node 0
- [ 2.181335] pata_acpi 0000:00:0a.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, high) -> IRQ 22
- [ 2.181350] pata_acpi 0000:00:0a.0: setting latency timer to 64
- [ 2.181356] pata_acpi 0000:00:0a.0: PCI INT A disabled
- [ 2.181688] Fixed MDIO Bus: probed
- [ 2.181719] PPP generic driver version 2.4.2
- [ 2.181773] tun: Universal TUN/TAP device driver, 1.6
- [ 2.181775] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 2.181838] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.182149] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
- [ 2.182152] alloc irq_desc for 21 on node 0
- [ 2.182153] alloc kstat_irqs on node 0
- [ 2.182159] ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 21 (level, high) -> IRQ 21
- [ 2.182180] ehci_hcd 0000:00:02.2: setting latency timer to 64
- [ 2.182182] ehci_hcd 0000:00:02.2: EHCI Host Controller
- [ 2.182214] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
- [ 2.182250] ehci_hcd 0000:00:02.2: debug port 1
- [ 2.182256] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
- [ 2.182276] ehci_hcd 0000:00:02.2: irq 21, io mem 0xfe02d000
- [ 2.200056] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
- [ 2.200258] hub 1-0:1.0: USB hub found
- [ 2.200265] hub 1-0:1.0: 8 ports detected
- [ 2.200378] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.210655] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
- [ 2.210664] alloc irq_desc for 20 on node 0
- [ 2.210666] alloc kstat_irqs on node 0
- [ 2.210680] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, high) -> IRQ 20
- [ 2.210707] ohci_hcd 0000:00:02.0: setting latency timer to 64
- [ 2.210710] ohci_hcd 0000:00:02.0: OHCI Host Controller
- [ 2.210810] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
- [ 2.210848] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
- [ 3.183157] hub 2-0:1.0: USB hub found
- [ 3.183166] hub 2-0:1.0: 4 ports detected
- [ 3.183671] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 23
- [ 3.183677] ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 23 (level, high) -> IRQ 23
- [ 3.183702] ohci_hcd 0000:00:02.1: setting latency timer to 64
- [ 3.183705] ohci_hcd 0000:00:02.1: OHCI Host Controller
- [ 3.183747] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
- [ 3.183784] ohci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000
- [ 3.211217] Freeing initrd memory: 11516k freed
- [ 3.242256] hub 3-0:1.0: USB hub found
- [ 3.242264] hub 3-0:1.0: 4 ports detected
- [ 3.242384] uhci_hcd: USB Universal Host Controller Interface driver
- [ 3.242540] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 3.245064] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 3.245070] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 3.245177] mice: PS/2 mouse device common for all mice
- [ 3.245318] rtc_cmos 00:05: RTC can wake from S4
- [ 3.245367] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
- [ 3.245391] rtc0: alarms up to one year, y3k, 242 bytes nvram
- [ 3.245479] device-mapper: uevent: version 1.0.3
- [ 3.245580] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
- [ 3.245637] device-mapper: multipath: version 1.1.1 loaded
- [ 3.245640] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 3.245774] cpuidle: using governor ladder
- [ 3.245777] cpuidle: using governor menu
- [ 3.246066] TCP cubic registered
- [ 3.246193] NET: Registered protocol family 10
- [ 3.246574] lo: Disabled Privacy Extensions
- [ 3.246766] NET: Registered protocol family 17
- [ 3.246793] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ (1 cpu cores) (version 2.20.00)
- [ 3.246857] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2
- [ 3.246859] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6
- [ 3.246862] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0xa
- [ 3.246963] PM: Resume from disk failed.
- [ 3.246986] registered taskstats version 1
- [ 3.247162] Magic number: 3:865:455
- [ 3.247276] rtc_cmos 00:05: setting system clock to 2003-01-13 00:27:15 UTC (1042417635)
- [ 3.247279] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 3.247280] EDD information not available.
- [ 3.247362] Freeing unused kernel memory: 908k freed
- [ 3.248282] Write protecting the kernel read-only data: 10240k
- [ 3.248435] Freeing unused kernel memory: 416k freed
- [ 3.248985] Freeing unused kernel memory: 1644k freed
- [ 3.268647] ramzswap: module is from the staging directory, the quality is unknown, you have been warned.
- [ 3.269346] ramzswap: num_devices not specified. Using default: 1
- [ 3.269348] ramzswap: Creating 1 devices ...
- [ 3.271062] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
- [ 3.275450] udev[82]: starting version 163
- [ 3.400112] usb 1-8: new high speed USB device using ehci_hcd and address 2
- [ 3.479254] Floppy drive(s): fd0 is 1.44M
- [ 3.492811] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
- [ 3.493176] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
- [ 3.493184] forcedeth 0000:00:05.0: PCI INT A -> Link[APCH] -> GSI 22 (level, high) -> IRQ 22
- [ 3.493189] forcedeth 0000:00:05.0: setting latency timer to 64
- [ 3.493270] nv_probe: set workaround bit for reversed mac addr
- [ 3.509269] FDC 0 is a post-1991 82077
- [ 3.543010] [drm] Initialized drm 1.1.0 20060810
- [ 3.578448] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
- [ 3.578456] alloc irq_desc for 16 on node 0
- [ 3.578459] alloc kstat_irqs on node 0
- [ 3.578473] nouveau 0000:01:00.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
- [ 3.584794] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x043100a4)
- [ 3.585911] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
- [ 3.707058] [drm] nouveau 0000:01:00.0: ... appears to be valid
- [ 3.707062] [drm] nouveau 0000:01:00.0: BIT BIOS found
- [ 3.707066] [drm] nouveau 0000:01:00.0: Bios version 05.43.02.46
- [ 3.707070] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
- [ 3.707072] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
- [ 3.707076] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028
- [ 3.707079] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 04011320 00000028
- [ 3.707082] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011322 00000000
- [ 3.707084] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020223f1 0000c080
- [ 3.707088] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 7 2
- [ 3.707092] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
- [ 3.707095] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
- [ 3.707098] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
- [ 3.707101] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
- [ 3.707103] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
- [ 3.707122] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xEF72
- [ 3.707375] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF31E
- [ 3.820233] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF847
- [ 3.820262] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF9CF
- [ 3.880029] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFA93
- [ 3.880041] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
- [ 3.891734] [TTM] Zone kernel: Available graphics memory: 252402 kiB.
- [ 3.891736] [TTM] Initializing pool allocator.
- [ 3.891831] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
- [ 3.891846] agpgart: work_for_cpu tried to set rate=x12. Setting to AGP3 x8 mode.
- [ 3.891854] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
- [ 3.891888] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
- [ 3.891891] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture)
- [ 3.892374] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
- [ 3.894085] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
- [ 3.894095] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
- [ 3.894105] [drm] nouveau 0000:01:00.0: Saving VGA fonts
- [ 3.988028] [drm] nouveau 0000:01:00.0: Detected a VGA connector
- [ 3.988157] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
- [ 3.988237] [drm] nouveau 0000:01:00.0: Detected a TV connector
- [ 3.991035] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
- [ 3.991039] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
- [ 3.991043] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
- [ 3.991047] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
- [ 4.030794] forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:11:09:79:ab:28
- [ 4.030798] forcedeth 0000:00:05.0: csum timirq gbit lnktim desc-v2
- [ 4.038154] pata_amd 0000:00:08.0: version 0.4.1
- [ 4.038253] pata_amd 0000:00:08.0: power state changed by ACPI to D0
- [ 4.038290] pata_amd 0000:00:08.0: power state changed by ACPI to D0
- [ 4.038347] pata_amd 0000:00:08.0: setting latency timer to 64
- [ 4.038415] scsi0 : pata_amd
- [ 4.038585] scsi1 : pata_amd
- [ 4.039361] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xdc00 irq 14
- [ 4.039363] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xdc08 irq 15
- [ 4.050080] sata_nv 0000:00:09.0: version 3.5
- [ 4.050091] sata_nv 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, high) -> IRQ 23
- [ 4.050129] sata_nv 0000:00:09.0: setting latency timer to 64
- [ 4.050170] scsi2 : sata_nv
- [ 4.050276] scsi3 : sata_nv
- [ 4.050432] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 23
- [ 4.050435] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 23
- [ 4.050542] sata_nv 0000:00:0a.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, high) -> IRQ 22
- [ 4.050578] sata_nv 0000:00:0a.0: setting latency timer to 64
- [ 4.050633] scsi4 : sata_nv
- [ 4.060044] scsi5 : sata_nv
- [ 4.060213] ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xb000 irq 22
- [ 4.060216] ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xb008 irq 22
- [ 4.280471] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88001c719000
- [ 4.292573] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
- [ 4.292578] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
- [ 4.293572] Console: switching to colour frame buffer device 160x64
- [ 4.294699] fb0: nouveaufb frame buffer device
- [ 4.294700] drm: registered panic notifier
- [ 4.294704] Slow work thread pool: Starting up
- [ 4.294763] Slow work thread pool: Ready
- [ 4.294771] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
- [ 4.380020] ata3: SATA link down (SStatus 0 SControl 300)
- [ 4.380274] ata2.00: ATAPI: SONY DVD RW DRU-540A, 1.0a, max UDMA/33
- [ 4.380299] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000) ACPI=0x701f (60:120:0x1b)
- [ 4.420206] ata2.00: configured for UDMA/33
- [ 4.421190] scsi 1:0:0:0: CD-ROM SONY DVD RW DRU-540A 1.0a PQ: 0 ANSI: 5
- [ 4.422312] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
- [ 4.422315] Uniform CD-ROM driver Revision: 3.20
- [ 4.422422] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 4.422492] sr 1:0:0:0: Attached scsi generic sg0 type 5
- [ 4.550026] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 4.571321] ata5.00: ATA-6: MD00300-BJDW, 21.02J21, max UDMA/133
- [ 4.571324] ata5.00: 58633344 sectors, multi 16: LBA48
- [ 4.611317] ata5.00: configured for UDMA/133
- [ 4.750020] ata4: SATA link down (SStatus 0 SControl 300)
- [ 4.750095] scsi 4:0:0:0: Direct-Access ATA MD00300-BJDW 21.0 PQ: 0 ANSI: 5
- [ 4.750216] sd 4:0:0:0: Attached scsi generic sg1 type 0
- [ 4.750392] sd 4:0:0:0: [sda] 58633344 512-byte logical blocks: (30.0 GB/27.9 GiB)
- [ 4.750441] sd 4:0:0:0: [sda] Write Protect is off
- [ 4.750444] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 4.750466] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 4.750598] sda: sda1 sda2 sda3
- [ 4.775722] sd 4:0:0:0: [sda] Attached SCSI disk
- [ 5.080025] ata6: SATA link down (SStatus 0 SControl 300)
- [ 5.736205] Btrfs loaded
- [ 5.741702] xor: automatically using best checksumming function: generic_sse
- [ 5.790012] generic_sse: 7111.600 MB/sec
- [ 5.790014] xor: using function: generic_sse (7111.600 MB/sec)
- [ 5.793270] device-mapper: dm-raid45: initialized v0.2594b
- [ 5.889590] EXT3-fs: barriers not enabled
- [ 5.904393] kjournald starting. Commit interval 5 seconds
- [ 5.904414] EXT3-fs (sda3): mounted filesystem with ordered data mode
- [ 7.016157] ISO 9660 Extensions: Microsoft Joliet Level 3
- [ 7.050707] ISO 9660 Extensions: RRIP_1991A
- [ 7.161872] aufs 2-standalone.tree-35-rcN-20100705
- [ 7.238907] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 45.543790] Adding 530140k swap on /dev/sda2. Priority:-1 extents:1 across:530140k
- [ 46.198947] udev[1276]: starting version 163
- [ 49.058144] i2c i2c-2: nForce2 SMBus adapter at 0x4c00
- [ 49.058232] i2c i2c-3: nForce2 SMBus adapter at 0x4c40
- [ 49.245437] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 49.609320] EDAC MC: Ver: 2.1.0 Sep 19 2010
- [ 49.610289] cfg80211: Calling CRDA to update world regulatory domain
- [ 49.788582] parport_pc 00:0b: reported by Plug and Play ACPI
- [ 49.788631] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
- [ 50.131902] EDAC amd64_edac: Ver: 3.3.0 Sep 19 2010
- [ 50.132613] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
- [ 50.132619] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- [ 50.132620] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- [ 50.132622] (Note that use of the override may cause unknown side effects.)
- [ 50.132643] amd64_edac: probe of 0000:00:18.2 failed with error -22
- [ 50.509471] ppdev: user-space parallel port driver
- [ 50.606012] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
- [ 52.309091] cfg80211: World regulatory domain updated:
- [ 52.309098] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 52.309102] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 52.309105] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 52.309107] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 52.309110] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 52.309113] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 52.681065] phy0 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.
- [ 52.681074] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
- [ 52.681134] usbcore: registered new interface driver rt2500usb
- [ 53.708862] phy1: Selected rate control algorithm 'minstrel'
- [ 53.709544] Registered led device: rt73usb-phy1::radio
- [ 53.709563] Registered led device: rt73usb-phy1::assoc
- [ 53.709579] Registered led device: rt73usb-phy1::quality
- [ 53.711607] usbcore: registered new interface driver rt73usb
- [ 55.033298] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
- [ 55.033307] Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 21 (level, high) -> IRQ 21
- [ 55.033341] Intel ICH 0000:00:06.0: setting latency timer to 64
- [ 55.370020] intel8x0_measure_ac97_clock: measured 50623 usecs (2488 samples)
- [ 55.370024] intel8x0: clocking to 46879
- [ 55.683211] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 56.039679] lp0: using parport0 (interrupt-driven).
- [ 65.890016] eth0: no IPv6 routers present
- [ 67.674446] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
- [ 67.675461] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
- [ 111.190396] eth0: link down.
- [ 130.130083] Clocksource tsc unstable (delta = -273418085 ns)
- [ 131.908710] wlan0: authenticate with 68:7f:74:07:ad:13 (try 1)
- [ 131.912196] wlan0: authenticated
- [ 131.913827] wlan0: associate with 68:7f:74:07:ad:13 (try 1)
- [ 131.917214] wlan0: RX AssocResp from 68:7f:74:07:ad:13 (capab=0x401 status=0 aid=3)
- [ 131.917222] wlan0: associated
- [ 131.922575] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 142.650027] wlan0: no IPv6 routers present
- [ 182.290096] wlan0: deauthenticating from 68:7f:74:07:ad:13 by local choice (reason=3)
- [ 182.292307] cfg80211: All devices are disconnected, going to restore regulatory settings
- [ 182.292320] cfg80211: Restoring regulatory settings
- [ 182.292329] cfg80211: Calling CRDA to update world regulatory domain
- [ 182.301002] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
- [ 182.793959] cfg80211: World regulatory domain updated:
- [ 182.793967] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 182.793970] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 182.793973] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 182.793976] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 182.793978] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 182.793981] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 187.295584] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
- [ 187.297005] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
- [ 225.526119] wlan0: authenticate with 68:7f:74:07:ad:13 (try 1)
- [ 225.529866] wlan0: authenticated
- [ 225.531601] wlan0: associate with 68:7f:74:07:ad:13 (try 1)
- [ 225.540153] wlan0: RX AssocResp from 68:7f:74:07:ad:13 (capab=0x401 status=0 aid=3)
- [ 225.540162] wlan0: associated
- root@ubuntu:/home/ubuntu# lsmod
- Module Size Used by
- binfmt_misc 7984 1
- dm_crypt 13381 0
- lp 10201 0
- snd_intel8x0 31307 2
- snd_ac97_codec 125227 1 snd_intel8x0
- ac97_bus 1474 1 snd_ac97_codec
- snd_pcm 89104 2 snd_intel8x0,snd_ac97_codec
- arc4 1497 2
- rt73usb 24308 0
- crc_itu_t 1739 1 rt73usb
- snd_seq_midi 5932 0
- snd_rawmidi 22207 1 snd_seq_midi
- rt2500usb 19651 0
- rt2x00usb 11316 2 rt73usb,rt2500usb
- snd_seq_midi_event 7291 1 snd_seq_midi
- rt2x00lib 31575 3 rt73usb,rt2500usb,rt2x00usb
- snd_seq 57512 2 snd_seq_midi,snd_seq_midi_event
- led_class 3393 1 rt2x00lib
- mac80211 266657 2 rt2x00usb,rt2x00lib
- snd_timer 23850 2 snd_pcm,snd_seq
- snd_seq_device 6912 3 snd_seq_midi,snd_rawmidi,snd_seq
- ppdev 6804 0
- snd 64117 11 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
- psmouse 62080 0
- parport_pc 30086 1
- edac_core 46822 0
- cfg80211 170293 2 rt2x00lib,mac80211
- soundcore 1240 1 snd
- serio_raw 4910 0
- parport 37032 3 lp,ppdev,parport_pc
- edac_mce_amd 9387 0
- shpchp 34910 0
- i2c_nforce2 6155 0
- k8temp 4064 0
- snd_page_alloc 8588 2 snd_intel8x0,snd_pcm
- squashfs 27681 1
- aufs 179029 4367
- nls_cp437 6375 1
- isofs 34218 1
- dm_raid45 75026 0
- xor 4709 1 dm_raid45
- btrfs 506518 0
- zlib_deflate 21866 1 btrfs
- crc32c 3007 1
- libcrc32c 1268 1 btrfs
- nouveau 568848 2
- ttm 68212 1 nouveau
- drm_kms_helper 32836 1 nouveau
- drm 206161 4 nouveau,ttm,drm_kms_helper
- i2c_algo_bit 6208 1 nouveau
- floppy 65299 0
- sata_nv 23770 1
- pata_amd 12050 1
- forcedeth 55649 0
- ramzswap 11551 0
- lzo_compress 2349 1 ramzswap
- root@ubuntu:/home/ubuntu# dmesg | tail -50
- [ 52.309110] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 52.309113] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 52.681065] phy0 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.
- [ 52.681074] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
- [ 52.681134] usbcore: registered new interface driver rt2500usb
- [ 53.708862] phy1: Selected rate control algorithm 'minstrel'
- [ 53.709544] Registered led device: rt73usb-phy1::radio
- [ 53.709563] Registered led device: rt73usb-phy1::assoc
- [ 53.709579] Registered led device: rt73usb-phy1::quality
- [ 53.711607] usbcore: registered new interface driver rt73usb
- [ 55.033298] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
- [ 55.033307] Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 21 (level, high) -> IRQ 21
- [ 55.033341] Intel ICH 0000:00:06.0: setting latency timer to 64
- [ 55.370020] intel8x0_measure_ac97_clock: measured 50623 usecs (2488 samples)
- [ 55.370024] intel8x0: clocking to 46879
- [ 55.683211] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 56.039679] lp0: using parport0 (interrupt-driven).
- [ 65.890016] eth0: no IPv6 routers present
- [ 67.674446] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
- [ 67.675461] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
- [ 111.190396] eth0: link down.
- [ 130.130083] Clocksource tsc unstable (delta = -273418085 ns)
- [ 131.908710] wlan0: authenticate with 68:7f:74:07:ad:13 (try 1)
- [ 131.912196] wlan0: authenticated
- [ 131.913827] wlan0: associate with 68:7f:74:07:ad:13 (try 1)
- [ 131.917214] wlan0: RX AssocResp from 68:7f:74:07:ad:13 (capab=0x401 status=0 aid=3)
- [ 131.917222] wlan0: associated
- [ 131.922575] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 142.650027] wlan0: no IPv6 routers present
- [ 182.290096] wlan0: deauthenticating from 68:7f:74:07:ad:13 by local choice (reason=3)
- [ 182.292307] cfg80211: All devices are disconnected, going to restore regulatory settings
- [ 182.292320] cfg80211: Restoring regulatory settings
- [ 182.292329] cfg80211: Calling CRDA to update world regulatory domain
- [ 182.301002] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
- [ 182.793959] cfg80211: World regulatory domain updated:
- [ 182.793967] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 182.793970] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 182.793973] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 182.793976] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 182.793978] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 182.793981] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 187.295584] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
- [ 187.297005] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
- [ 225.526119] wlan0: authenticate with 68:7f:74:07:ad:13 (try 1)
- [ 225.529866] wlan0: authenticated
- [ 225.531601] wlan0: associate with 68:7f:74:07:ad:13 (try 1)
- [ 225.540153] wlan0: RX AssocResp from 68:7f:74:07:ad:13 (capab=0x401 status=0 aid=3)
- [ 225.540162] wlan0: associated
- [ 6774.571271] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
- [13179.219274] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
- root@ubuntu:/home/ubuntu#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement