Guest User

1

a guest
Oct 3rd, 2014
322
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 72.28 KB | None | 0 0
  1. 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Initializing cgroup subsys cpuacct
  4. [ 0.000000] Linux version 3.14-kali1-686-pae ([email protected]) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.14.5-1kali1 (2014-06-07)
  5. [ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended
  6. [ 0.000000] e820: BIOS-provided physical RAM map:
  7. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
  8. [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
  9. [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
  10. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f6cffff] usable
  11. [ 0.000000] BIOS-e820: [mem 0x000000003f6d0000-0x000000003f6e1fff] ACPI data
  12. [ 0.000000] BIOS-e820: [mem 0x000000003f6e2000-0x000000003f6e2fff] ACPI NVS
  13. [ 0.000000] BIOS-e820: [mem 0x000000003f6e3000-0x000000003fffffff] reserved
  14. [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
  15. [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
  16. [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
  17. [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
  18. [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
  19. [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
  20. [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
  21. [ 0.000000] NX (Execute Disable) protection: active
  22. [ 0.000000] SMBIOS 2.5 present.
  23. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. NC10 /NC10 , BIOS 09CA.M004.20090619.RHU 06/19/2009
  24. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  25. [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  26. [ 0.000000] e820: last_pfn = 0x3f6d0 max_arch_pfn = 0x1000000
  27. [ 0.000000] MTRR default type: uncachable
  28. [ 0.000000] MTRR fixed ranges enabled:
  29. [ 0.000000] 00000-9FFFF write-back
  30. [ 0.000000] A0000-BFFFF uncachable
  31. [ 0.000000] C0000-CFFFF write-protect
  32. [ 0.000000] D0000-DFFFF uncachable
  33. [ 0.000000] E0000-FFFFF write-protect
  34. [ 0.000000] MTRR variable ranges enabled:
  35. [ 0.000000] 0 base 000000000 mask 0C0000000 write-back
  36. [ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable
  37. [ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
  38. [ 0.000000] 3 disabled
  39. [ 0.000000] 4 disabled
  40. [ 0.000000] 5 disabled
  41. [ 0.000000] 6 disabled
  42. [ 0.000000] 7 disabled
  43. [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  44. [ 0.000000] found SMP MP-table at [mem 0x000f71d0-0x000f71df] mapped at [c00f71d0]
  45. [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
  46. [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
  47. [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
  48. [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
  49. [ 0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
  50. [ 0.000000] [mem 0x37600000-0x377fffff] page 4k
  51. [ 0.000000] BRK [0x0172f000, 0x0172ffff] PGTABLE
  52. [ 0.000000] init_memory_mapping: [mem 0x34000000-0x375fffff]
  53. [ 0.000000] [mem 0x34000000-0x375fffff] page 4k
  54. [ 0.000000] BRK [0x01730000, 0x01730fff] PGTABLE
  55. [ 0.000000] BRK [0x01731000, 0x01731fff] PGTABLE
  56. [ 0.000000] BRK [0x01732000, 0x01732fff] PGTABLE
  57. [ 0.000000] BRK [0x01733000, 0x01733fff] PGTABLE
  58. [ 0.000000] BRK [0x01734000, 0x01734fff] PGTABLE
  59. [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
  60. [ 0.000000] [mem 0x00100000-0x33ffffff] page 4k
  61. [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff]
  62. [ 0.000000] [mem 0x37800000-0x379fdfff] page 4k
  63. [ 0.000000] RAMDISK: [mem 0x35c4c000-0x36e1dfff]
  64. [ 0.000000] ACPI: RSDP 000f71a0 000024 (v02 PTLTD )
  65. [ 0.000000] ACPI: XSDT 3f6db935 000084 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
  66. [ 0.000000] ACPI: FACP 3f6e1bd2 0000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001)
  67. [ 0.000000] ACPI: DSDT 3f6dd5dd 004581 (v01 INTEL CALISTGA 06040000 INTL 20050624)
  68. [ 0.000000] ACPI: FACS 3f6e2fc0 000040
  69. [ 0.000000] ACPI: APIC 3f6e1cc6 000068 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
  70. [ 0.000000] ACPI: HPET 3f6e1d2e 000038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
  71. [ 0.000000] ACPI: MCFG 3f6e1d66 00003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
  72. [ 0.000000] ACPI: TCPA 3f6e1da2 000032 (v01 PTLTD CALISTGA 06040000 PTL 00000001)
  73. [ 0.000000] ACPI: TMOR 3f6e1dd4 000026 (v01 PTLTD 06040000 PTL 00000003)
  74. [ 0.000000] ACPI: APIC 3f6e1dfa 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
  75. [ 0.000000] ACPI: BOOT 3f6e1e62 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
  76. [ 0.000000] ACPI: SLIC 3f6e1e8a 000176 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
  77. [ 0.000000] ACPI: SSDT 3f6dcf8e 00064F (v01 SataRe SataPri 00001000 INTL 20050624)
  78. [ 0.000000] ACPI: SSDT 3f6dc8f2 00069C (v01 SataRe SataSec 00001000 INTL 20050624)
  79. [ 0.000000] ACPI: SSDT 3f6db9b9 0004F6 (v02 PmRef CpuPm 00003000 INTL 20050624)
  80. [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
  81. [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
  82. [ 0.000000] ACPI: Local APIC address 0xfee00000
  83. [ 0.000000] 124MB HIGHMEM available.
  84. [ 0.000000] 889MB LOWMEM available.
  85. [ 0.000000] mapped low ram: 0 - 379fe000
  86. [ 0.000000] low ram: 0 - 379fe000
  87. [ 0.000000] Zone ranges:
  88. [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
  89. [ 0.000000] Normal [mem 0x01000000-0x379fdfff]
  90. [ 0.000000] HighMem [mem 0x379fe000-0x3f6cffff]
  91. [ 0.000000] Movable zone start for each node
  92. [ 0.000000] Early memory node ranges
  93. [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
  94. [ 0.000000] node 0: [mem 0x00100000-0x3f6cffff]
  95. [ 0.000000] On node 0 totalpages: 259694
  96. [ 0.000000] free_area_init_node: node 0, pgdat c15f4480, node_mem_map f6e67020
  97. [ 0.000000] DMA zone: 32 pages used for memmap
  98. [ 0.000000] DMA zone: 0 pages reserved
  99. [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
  100. [ 0.000000] Normal zone: 1748 pages used for memmap
  101. [ 0.000000] Normal zone: 223742 pages, LIFO batch:31
  102. [ 0.000000] HighMem zone: 250 pages used for memmap
  103. [ 0.000000] HighMem zone: 31954 pages, LIFO batch:7
  104. [ 0.000000] Using APIC driver default
  105. [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
  106. [ 0.000000] ACPI: Local APIC address 0xfee00000
  107. [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  108. [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  109. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  110. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  111. [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
  112. [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
  113. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  114. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  115. [ 0.000000] ACPI: IRQ0 used by override.
  116. [ 0.000000] ACPI: IRQ2 used by override.
  117. [ 0.000000] ACPI: IRQ9 used by override.
  118. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  119. [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
  120. [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
  121. [ 0.000000] nr_irqs_gsi: 40
  122. [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
  123. [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
  124. [ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
  125. [ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
  126. [ 0.000000] Booting paravirtualized kernel on bare hardware
  127. [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
  128. [ 0.000000] PERCPU: Embedded 14 pages/cpu @f79d8000 s35520 r0 d21824 u57344
  129. [ 0.000000] pcpu-alloc: s35520 r0 d21824 u57344 alloc=14*4096
  130. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  131. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257914
  132. [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-kali1-686-pae root=UUID=c94979cd-6d8d-4b64-bed3-23ee193d68cc ro initrd=/install/initrd.gz quiet
  133. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  134. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  135. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  136. [ 0.000000] Initializing CPU#0
  137. [ 0.000000] Initializing HighMem for node 0 (000379fe:0003f6d0)
  138. [ 0.000000] Initializing Movable for node 0 (00000000:00000000)
  139. [ 0.000000] Memory: 1002312K/1038776K available (4419K kernel code, 384K rwdata, 1336K rodata, 540K init, 584K bss, 36464K reserved, 127816K highmem)
  140. [ 0.000000] virtual kernel memory layout:
  141. [ 0.000000] fixmap : 0xffd35000 - 0xfffff000 (2856 kB)
  142. [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
  143. [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
  144. [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
  145. [ 0.000000] .init : 0xc1602000 - 0xc1689000 ( 540 kB)
  146. [ 0.000000] .data : 0xc14511fb - 0xc1601040 (1727 kB)
  147. [ 0.000000] .text : 0xc1000000 - 0xc14511fb (4420 kB)
  148. [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  149. [ 0.000000] Hierarchical RCU implementation.
  150. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  151. [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
  152. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  153. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
  154. [ 0.000000] CPU 0 irqstacks, hard=f5806000 soft=f5808000
  155. [ 0.000000] Console: colour VGA+ 80x25
  156. [ 0.000000] console [tty0] enabled
  157. [ 0.000000] hpet clockevent registered
  158. [ 0.000000] tsc: Fast TSC calibration using PIT
  159. [ 0.000000] tsc: Detected 1595.941 MHz processor
  160. [ 0.004018] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.88 BogoMIPS (lpj=6383764)
  161. [ 0.004028] pid_max: default: 32768 minimum: 301
  162. [ 0.004054] ACPI: Core revision 20131218
  163. [ 0.012117] ACPI: All ACPI Tables successfully acquired
  164. [ 0.014393] Security Framework initialized
  165. [ 0.014408] AppArmor: AppArmor disabled by boot time parameter
  166. [ 0.014412] Yama: disabled by default; enable with sysctl kernel.yama.*
  167. [ 0.014453] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  168. [ 0.014460] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  169. [ 0.014864] Initializing cgroup subsys memory
  170. [ 0.014880] Initializing cgroup subsys devices
  171. [ 0.014885] Initializing cgroup subsys freezer
  172. [ 0.014890] Initializing cgroup subsys net_cls
  173. [ 0.014895] Initializing cgroup subsys blkio
  174. [ 0.014900] Initializing cgroup subsys perf_event
  175. [ 0.014946] Atom PSE erratum detected, BIOS microcode update recommended
  176. [ 0.014955] CPU: Physical Processor ID: 0
  177. [ 0.014958] CPU: Processor Core ID: 0
  178. [ 0.014964] mce: CPU supports 5 MCE banks
  179. [ 0.014976] CPU0: Thermal monitoring enabled (TM1)
  180. [ 0.015000] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
  181. [ 0.015000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
  182. [ 0.015000] tlb_flushall_shift: 6
  183. [ 0.015136] Freeing SMP alternatives memory: 20K (c1689000 - c168e000)
  184. [ 0.016928] Enabling APIC mode: Flat. Using 1 I/O APICs
  185. [ 0.017431] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  186. [ 0.057143] smpboot: CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (fam: 06, model: 1c, stepping: 02)
  187. [ 0.060000] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
  188. [ 0.060000] ... version: 3
  189. [ 0.060000] ... bit width: 40
  190. [ 0.060000] ... generic registers: 2
  191. [ 0.060000] ... value mask: 000000ffffffffff
  192. [ 0.060000] ... max period: 000000007fffffff
  193. [ 0.060000] ... fixed-purpose events: 3
  194. [ 0.060000] ... event mask: 0000000700000003
  195. [ 0.060000] CPU 1 irqstacks, hard=f58ae000 soft=f58b0000
  196. [ 0.060000] x86: Booting SMP configuration:
  197. [ 0.060000] .... node #0, CPUs: #1
  198. [ 0.008000] Initializing CPU#1
  199. [ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended
  200. [ 0.070168] x86: Booted up 1 node, 2 CPUs
  201. [ 0.070180] smpboot: Total of 2 processors activated (6383.76 BogoMIPS)
  202. [ 0.070441] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  203. [ 0.071106] devtmpfs: initialized
  204. [ 0.072075] PM: Registering ACPI NVS region [mem 0x3f6e2000-0x3f6e2fff] (4096 bytes)
  205. [ 0.072482] pinctrl core: initialized pinctrl subsystem
  206. [ 0.072655] NET: Registered protocol family 16
  207. [ 0.072952] cpuidle: using governor ladder
  208. [ 0.072958] cpuidle: using governor menu
  209. [ 0.073061] ACPI: bus type PCI registered
  210. [ 0.073068] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  211. [ 0.073316] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  212. [ 0.073324] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
  213. [ 0.073329] PCI: Using MMCONFIG for extended config space
  214. [ 0.073333] PCI: Using configuration type 1 for base access
  215. [ 0.076063] bio: create slab <bio-0> at 0
  216. [ 0.076138] ACPI: Added _OSI(Module Device)
  217. [ 0.076144] ACPI: Added _OSI(Processor Device)
  218. [ 0.076149] ACPI: Added _OSI(3.0 _SCP Extensions)
  219. [ 0.076153] ACPI: Added _OSI(Processor Aggregator Device)
  220. [ 0.081633] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
  221. [ 0.083321] ACPI: SSDT 3f6dc5d9 000245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
  222. [ 0.083773] ACPI: Dynamic OEM Table Load:
  223. [ 0.083780] ACPI: SSDT (null) 000245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
  224. [ 0.084091] ACPI: SSDT 3f6dbeaf 0006A5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
  225. [ 0.084495] ACPI: Dynamic OEM Table Load:
  226. [ 0.084501] ACPI: SSDT (null) 0006A5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
  227. [ 0.085045] ACPI: SSDT 3f6dc81e 0000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
  228. [ 0.085470] ACPI: Dynamic OEM Table Load:
  229. [ 0.085477] ACPI: SSDT (null) 0000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
  230. [ 0.085650] ACPI: SSDT 3f6dc554 000085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
  231. [ 0.086054] ACPI: Dynamic OEM Table Load:
  232. [ 0.086061] ACPI: SSDT (null) 000085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
  233. [ 0.086578] ACPI: Interpreter enabled
  234. [ 0.086578] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
  235. [ 0.086578] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
  236. [ 0.086578] ACPI: (supports S0 S3 S4 S5)
  237. [ 0.086578] ACPI: Using IOAPIC for interrupt routing
  238. [ 0.086578] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  239. [ 0.086578] ACPI: No dock devices found.
  240. [ 0.101751] ACPI: Power Resource [FN00] (off)
  241. [ 0.104631] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  242. [ 0.104650] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  243. [ 0.104666] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
  244. [ 0.106565] PCI host bridge to bus 0000:00
  245. [ 0.106575] pci_bus 0000:00: root bus resource [bus 00-ff]
  246. [ 0.106582] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
  247. [ 0.106589] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
  248. [ 0.106595] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
  249. [ 0.106602] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
  250. [ 0.106608] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
  251. [ 0.106614] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
  252. [ 0.106620] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
  253. [ 0.106642] pci 0000:00:00.0: [8086:27ac] type 00 class 0x060000
  254. [ 0.106898] pci 0000:00:02.0: [8086:27ae] type 00 class 0x030000
  255. [ 0.106920] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf007ffff]
  256. [ 0.106931] pci 0000:00:02.0: reg 0x14: [io 0x1800-0x1807]
  257. [ 0.106943] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
  258. [ 0.106955] pci 0000:00:02.0: reg 0x1c: [mem 0xf0300000-0xf033ffff]
  259. [ 0.107195] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
  260. [ 0.107213] pci 0000:00:02.1: reg 0x10: [mem 0xf0080000-0xf00fffff]
  261. [ 0.107513] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
  262. [ 0.107547] pci 0000:00:1b.0: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit]
  263. [ 0.107689] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  264. [ 0.107794] pci 0000:00:1b.0: System wakeup disabled by ACPI
  265. [ 0.107948] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
  266. [ 0.108109] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  267. [ 0.108366] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
  268. [ 0.108513] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
  269. [ 0.108763] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
  270. [ 0.108836] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
  271. [ 0.109003] pci 0000:00:1d.0: System wakeup disabled by ACPI
  272. [ 0.109162] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
  273. [ 0.109235] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
  274. [ 0.109394] pci 0000:00:1d.1: System wakeup disabled by ACPI
  275. [ 0.109548] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
  276. [ 0.109620] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f]
  277. [ 0.109778] pci 0000:00:1d.2: System wakeup disabled by ACPI
  278. [ 0.109930] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
  279. [ 0.110002] pci 0000:00:1d.3: reg 0x20: [io 0x1880-0x189f]
  280. [ 0.110166] pci 0000:00:1d.3: System wakeup disabled by ACPI
  281. [ 0.110335] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
  282. [ 0.110370] pci 0000:00:1d.7: reg 0x10: [mem 0xf0544000-0xf05443ff]
  283. [ 0.110499] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  284. [ 0.110596] pci 0000:00:1d.7: System wakeup disabled by ACPI
  285. [ 0.110755] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
  286. [ 0.111055] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
  287. [ 0.111177] pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
  288. [ 0.111189] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
  289. [ 0.111445] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
  290. [ 0.111475] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
  291. [ 0.111493] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
  292. [ 0.111511] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
  293. [ 0.111528] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
  294. [ 0.111545] pci 0000:00:1f.2: reg 0x20: [io 0x1810-0x181f]
  295. [ 0.111615] pci 0000:00:1f.2: PME# supported from D3hot
  296. [ 0.111845] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
  297. [ 0.111926] pci 0000:00:1f.3: reg 0x20: [io 0x18a0-0x18bf]
  298. [ 0.112394] pci 0000:02:00.0: [8086:423c] type 00 class 0x028000
  299. [ 0.112447] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf0101fff 64bit]
  300. [ 0.112680] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
  301. [ 0.112755] pci 0000:02:00.0: System wakeup disabled by ACPI
  302. [ 0.120040] pci 0000:00:1c.0: PCI bridge to [bus 02]
  303. [ 0.120055] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
  304. [ 0.120415] pci 0000:03:00.0: [11ab:4354] type 00 class 0x020000
  305. [ 0.120577] pci 0000:03:00.0: reg 0x10: [mem 0xf0200000-0xf0203fff 64bit]
  306. [ 0.120665] pci 0000:03:00.0: reg 0x18: [io 0x2000-0x20ff]
  307. [ 0.121402] pci 0000:03:00.0: supports D1 D2
  308. [ 0.121408] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  309. [ 0.121571] pci 0000:03:00.0: System wakeup disabled by ACPI
  310. [ 0.128080] pci 0000:00:1c.2: PCI bridge to [bus 03]
  311. [ 0.128091] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
  312. [ 0.128101] pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf02fffff]
  313. [ 0.128413] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
  314. [ 0.128435] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
  315. [ 0.128442] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
  316. [ 0.128448] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  317. [ 0.128455] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
  318. [ 0.128461] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
  319. [ 0.128467] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
  320. [ 0.128474] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
  321. [ 0.128530] pci_bus 0000:00: on NUMA node 0
  322. [ 0.128772] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
  323. [ 0.128934] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
  324. [ 0.129091] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
  325. [ 0.129246] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
  326. [ 0.129400] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
  327. [ 0.129556] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
  328. [ 0.129713] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
  329. [ 0.129868] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
  330. [ 0.129974] ACPI: Enabled 1 GPEs in block 00 to 1F
  331. [ 0.129974] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
  332. [ 0.129974] ACPI : EC: 0 stale EC events cleared
  333. [ 0.129974] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  334. [ 0.129974] vgaarb: loaded
  335. [ 0.129974] vgaarb: bridge control possible 0000:00:02.0
  336. [ 0.129974] PCI: Using ACPI for IRQ routing
  337. [ 0.143382] PCI: pci_cache_line_size set to 64 bytes
  338. [ 0.143506] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
  339. [ 0.143513] e820: reserve RAM buffer [mem 0x3f6d0000-0x3fffffff]
  340. [ 0.143950] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
  341. [ 0.143963] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  342. [ 0.143974] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
  343. [ 0.145055] Switched to clocksource hpet
  344. [ 0.149410] pnp: PnP ACPI init
  345. [ 0.149469] ACPI: bus type PNP registered
  346. [ 0.149758] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
  347. [ 0.149768] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
  348. [ 0.149775] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
  349. [ 0.149783] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
  350. [ 0.149790] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
  351. [ 0.149797] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
  352. [ 0.149805] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
  353. [ 0.149812] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
  354. [ 0.149822] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
  355. [ 0.150495] pnp 00:01: [dma 4]
  356. [ 0.150602] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
  357. [ 0.150715] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
  358. [ 0.151014] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
  359. [ 0.151025] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
  360. [ 0.151167] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
  361. [ 0.151331] system 00:05: [io 0x0680-0x069f] has been reserved
  362. [ 0.151340] system 00:05: [io 0x0800-0x080f] has been reserved
  363. [ 0.151348] system 00:05: [io 0x1000-0x107f] could not be reserved
  364. [ 0.151355] system 00:05: [io 0x1180-0x11bf] has been reserved
  365. [ 0.151362] system 00:05: [io 0x1640-0x164f] has been reserved
  366. [ 0.151370] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
  367. [ 0.151561] system 00:06: [io 0x06a0-0x06af] has been reserved
  368. [ 0.151570] system 00:06: [io 0x06b0-0x06ff] has been reserved
  369. [ 0.151578] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
  370. [ 0.151704] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
  371. [ 0.151866] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
  372. [ 0.151989] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
  373. [ 0.152295] pnp: PnP ACPI: found 10 devices
  374. [ 0.152301] ACPI: bus type PNP unregistered
  375. [ 0.152311] PnPBIOS: Disabled by ACPI PNP
  376. [ 0.195331] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
  377. [ 0.195346] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
  378. [ 0.195366] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
  379. [ 0.195393] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
  380. [ 0.195403] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
  381. [ 0.195410] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
  382. [ 0.195417] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
  383. [ 0.195443] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
  384. [ 0.195459] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
  385. [ 0.195471] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
  386. [ 0.195479] pci 0000:00:1c.0: PCI bridge to [bus 02]
  387. [ 0.195487] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
  388. [ 0.195499] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
  389. [ 0.195510] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff 64bit pref]
  390. [ 0.195522] pci 0000:00:1c.2: PCI bridge to [bus 03]
  391. [ 0.195530] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
  392. [ 0.195541] pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf02fffff]
  393. [ 0.195550] pci 0000:00:1c.2: bridge window [mem 0x40200000-0x403fffff 64bit pref]
  394. [ 0.195563] pci 0000:00:1e.0: PCI bridge to [bus 04]
  395. [ 0.195585] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
  396. [ 0.195591] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
  397. [ 0.195597] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  398. [ 0.195604] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
  399. [ 0.195610] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
  400. [ 0.195616] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
  401. [ 0.195622] pci_bus 0000:00: resource 10 [mem 0x40000000-0xfebfffff]
  402. [ 0.195629] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
  403. [ 0.195635] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
  404. [ 0.195642] pci_bus 0000:02: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
  405. [ 0.195648] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
  406. [ 0.195655] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf02fffff]
  407. [ 0.195661] pci_bus 0000:03: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
  408. [ 0.195668] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
  409. [ 0.195674] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
  410. [ 0.195681] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
  411. [ 0.195687] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
  412. [ 0.195693] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
  413. [ 0.195699] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
  414. [ 0.195706] pci_bus 0000:04: resource 10 [mem 0x40000000-0xfebfffff]
  415. [ 0.195835] NET: Registered protocol family 2
  416. [ 0.196255] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  417. [ 0.196299] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  418. [ 0.196358] TCP: Hash tables configured (established 8192 bind 8192)
  419. [ 0.196454] TCP: reno registered
  420. [ 0.196462] UDP hash table entries: 512 (order: 2, 16384 bytes)
  421. [ 0.196480] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  422. [ 0.196646] NET: Registered protocol family 1
  423. [ 0.196690] pci 0000:00:02.0: Boot video device
  424. [ 0.199243] PCI: CLS 64 bytes, default 64
  425. [ 0.199377] Unpacking initramfs...
  426. [ 1.044020] Freeing initrd memory: 18248K (f5c4c000 - f6e1e000)
  427. [ 1.044166] Simple Boot Flag at 0x36 set to 0x1
  428. [ 1.044582] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x20a
  429. [ 1.044605] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x20a
  430. [ 1.044799] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
  431. [ 1.045643] futex hash table entries: 512 (order: 3, 32768 bytes)
  432. [ 1.045785] audit: initializing netlink subsys (disabled)
  433. [ 1.045834] audit: type=2000 audit(1412268051.044:1): initialized
  434. [ 1.075962] bounce pool size: 64 pages
  435. [ 1.075977] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  436. [ 1.076301] VFS: Disk quotas dquot_6.5.2
  437. [ 1.076358] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  438. [ 1.076524] msgmni has been set to 1743
  439. [ 1.077325] alg: No test for stdrng (krng)
  440. [ 1.077405] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  441. [ 1.077497] io scheduler noop registered
  442. [ 1.077504] io scheduler deadline registered
  443. [ 1.077539] io scheduler cfq registered (default)
  444. [ 1.078094] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
  445. [ 1.078551] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
  446. [ 1.078813] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  447. [ 1.078882] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  448. [ 1.079035] intel_idle: MWAIT substates: 0x20220
  449. [ 1.079052] intel_idle: v0.4 model 0x1C
  450. [ 1.079057] intel_idle: lapic_timer_reliable_states 0x2
  451. [ 1.079074] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
  452. [ 1.079362] GHES: HEST is not enabled!
  453. [ 1.079416] isapnp: Scanning for PnP cards...
  454. [ 1.433223] isapnp: No Plug & Play device found
  455. [ 1.433444] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  456. [ 1.435020] Linux agpgart interface v0.103
  457. [ 1.435270] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
  458. [ 1.435385] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
  459. [ 1.435526] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
  460. [ 1.435810] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
  461. [ 1.436314] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  462. [ 1.438480] i8042: Detected active multiplexing controller, rev 1.1
  463. [ 1.440185] serio: i8042 KBD port at 0x60,0x64 irq 1
  464. [ 1.440208] serio: i8042 AUX0 port at 0x60,0x64 irq 12
  465. [ 1.440338] serio: i8042 AUX1 port at 0x60,0x64 irq 12
  466. [ 1.440438] serio: i8042 AUX2 port at 0x60,0x64 irq 12
  467. [ 1.440538] serio: i8042 AUX3 port at 0x60,0x64 irq 12
  468. [ 1.441027] mousedev: PS/2 mouse device common for all mice
  469. [ 1.441173] rtc_cmos 00:07: RTC can wake from S4
  470. [ 1.441505] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
  471. [ 1.441557] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  472. [ 1.441855] TCP: cubic registered
  473. [ 1.441986] NET: Registered protocol family 10
  474. [ 1.442625] mip6: Mobile IPv6
  475. [ 1.442634] NET: Registered protocol family 17
  476. [ 1.442644] mpls_gso: MPLS GSO support
  477. [ 1.443146] Using IPI No-Shortcut mode
  478. [ 1.443552] registered taskstats version 1
  479. [ 1.444508] rtc_cmos 00:07: setting system clock to 2014-10-02 16:40:51 UTC (1412268051)
  480. [ 1.444716] PM: Hibernation image not present or could not be loaded.
  481. [ 1.445204] Freeing unused kernel memory: 540K (c1602000 - c1689000)
  482. [ 1.445477] Write protecting the kernel text: 4424k
  483. [ 1.445566] Write protecting the kernel read-only data: 1340k
  484. [ 1.445571] NX-protecting the kernel data: 3768k
  485. [ 1.468634] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  486. [ 1.640542] udevd[60]: starting version 175
  487. [ 1.732347] ACPI: bus type USB registered
  488. [ 1.732512] usbcore: registered new interface driver usbfs
  489. [ 1.732595] usbcore: registered new interface driver hub
  490. [ 1.747029] usbcore: registered new device driver usb
  491. [ 1.748614] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  492. [ 1.749773] uhci_hcd: USB Universal Host Controller Interface driver
  493. [ 1.750292] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  494. [ 1.750327] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
  495. [ 1.750443] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
  496. [ 1.751087] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
  497. [ 1.751100] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  498. [ 1.751109] usb usb1: Product: UHCI Host Controller
  499. [ 1.751118] usb usb1: Manufacturer: Linux 3.14-kali1-686-pae uhci_hcd
  500. [ 1.751126] usb usb1: SerialNumber: 0000:00:1d.0
  501. [ 1.751847] hub 1-0:1.0: USB hub found
  502. [ 1.751890] hub 1-0:1.0: 2 ports detected
  503. [ 1.753016] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  504. [ 1.753051] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
  505. [ 1.753154] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
  506. [ 1.754421] ehci-pci: EHCI PCI platform driver
  507. [ 1.764124] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  508. [ 1.764137] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  509. [ 1.764147] usb usb2: Product: UHCI Host Controller
  510. [ 1.764154] usb usb2: Manufacturer: Linux 3.14-kali1-686-pae uhci_hcd
  511. [ 1.764162] usb usb2: SerialNumber: 0000:00:1d.1
  512. [ 1.765949] sky2: driver version 1.30
  513. [ 1.766439] sky2 0000:03:00.0: Yukon-2 FE+ chip revision 0
  514. [ 1.766841] sky2 0000:03:00.0: irq 42 for MSI/MSI-X
  515. [ 1.768320] sky2 0000:03:00.0 eth0: addr 00:13:77:bb:6c:49
  516. [ 1.768323] hub 2-0:1.0: USB hub found
  517. [ 1.773163] hub 2-0:1.0: 2 ports detected
  518. [ 1.774555] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  519. [ 1.774593] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
  520. [ 1.774700] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
  521. [ 1.774943] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  522. [ 1.774955] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  523. [ 1.774963] usb usb3: Product: UHCI Host Controller
  524. [ 1.774972] usb usb3: Manufacturer: Linux 3.14-kali1-686-pae uhci_hcd
  525. [ 1.774980] usb usb3: SerialNumber: 0000:00:1d.2
  526. [ 1.775675] hub 3-0:1.0: USB hub found
  527. [ 1.783449] ACPI: Fan [FAN0] (off)
  528. [ 1.788401] hub 3-0:1.0: 2 ports detected
  529. [ 1.789430] uhci_hcd 0000:00:1d.3: UHCI Host Controller
  530. [ 1.789460] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
  531. [ 1.789566] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
  532. [ 1.792472] thermal LNXTHERM:00: registered as thermal_zone0
  533. [ 1.792483] ACPI: Thermal Zone [TZ00] (32 C)
  534. [ 1.795027] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  535. [ 1.795041] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  536. [ 1.795050] usb usb4: Product: UHCI Host Controller
  537. [ 1.795059] usb usb4: Manufacturer: Linux 3.14-kali1-686-pae uhci_hcd
  538. [ 1.795067] usb usb4: SerialNumber: 0000:00:1d.3
  539. [ 1.796542] hub 4-0:1.0: USB hub found
  540. [ 1.797877] hub 4-0:1.0: 2 ports detected
  541. [ 1.807085] ehci-pci 0000:00:1d.7: EHCI Host Controller
  542. [ 1.807117] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
  543. [ 1.807153] ehci-pci 0000:00:1d.7: debug port 1
  544. [ 1.807998] SCSI subsystem initialized
  545. [ 1.811117] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
  546. [ 1.811220] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf0544000
  547. [ 1.820350] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  548. [ 1.820605] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  549. [ 1.820615] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  550. [ 1.820624] usb usb5: Product: EHCI Host Controller
  551. [ 1.820631] usb usb5: Manufacturer: Linux 3.14-kali1-686-pae ehci_hcd
  552. [ 1.820638] usb usb5: SerialNumber: 0000:00:1d.7
  553. [ 1.821826] hub 5-0:1.0: USB hub found
  554. [ 1.821873] hub 5-0:1.0: 8 ports detected
  555. [ 1.848354] hub 1-0:1.0: USB hub found
  556. [ 1.848401] hub 1-0:1.0: 2 ports detected
  557. [ 1.849004] libata version 3.00 loaded.
  558. [ 1.872331] hub 2-0:1.0: USB hub found
  559. [ 1.872375] hub 2-0:1.0: 2 ports detected
  560. [ 1.896342] hub 3-0:1.0: USB hub found
  561. [ 1.896394] hub 3-0:1.0: 2 ports detected
  562. [ 1.920334] hub 4-0:1.0: USB hub found
  563. [ 1.920385] hub 4-0:1.0: 2 ports detected
  564. [ 1.921418] ata_piix 0000:00:1f.2: version 2.13
  565. [ 1.921861] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
  566. [ 2.079233] scsi0 : ata_piix
  567. [ 2.079686] scsi1 : ata_piix
  568. [ 2.079936] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
  569. [ 2.079946] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
  570. [ 2.080685] ata2: port disabled--ignoring
  571. [ 2.136271] usb 5-3: new high-speed USB device number 2 using ehci-pci
  572. [ 2.269198] usb 5-3: New USB device found, idVendor=8086, idProduct=0180
  573. [ 2.269223] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  574. [ 2.269230] usb 5-3: Product: Intel(R) WiMAX Link 5150
  575. [ 2.269235] usb 5-3: Manufacturer: Intel(R) Corporation
  576. [ 2.289604] ata1.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max UDMA/133
  577. [ 2.289623] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
  578. [ 2.305196] ata1.00: configured for UDMA/133
  579. [ 2.305671] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVT-2 11.0 PQ: 0 ANSI: 5
  580. [ 2.325198] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
  581. [ 2.325477] sd 0:0:0:0: [sda] Write Protect is off
  582. [ 2.325490] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  583. [ 2.325609] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  584. [ 2.356633] sda: sda1 sda2 < sda5 >
  585. [ 2.358086] sd 0:0:0:0: [sda] Attached SCSI disk
  586. [ 2.362537] sd 0:0:0:0: Attached scsi generic sg0 type 0
  587. [ 2.640121] usb 5-8: new high-speed USB device number 4 using ehci-pci
  588. [ 2.683253] platform microcode: firmware: direct-loading firmware intel-ucode/06-1c-02
  589. [ 2.683328] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x20a
  590. [ 2.687321] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
  591. [ 2.688424] platform microcode: firmware: direct-loading firmware intel-ucode/06-1c-02
  592. [ 2.688483] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x20a
  593. [ 2.692273] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
  594. [ 2.707632] device-mapper: uevent: version 1.0.3
  595. [ 2.707871] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
  596. [ 2.734369] PM: Starting manual resume from disk
  597. [ 2.734380] PM: Hibernation image partition 8:5 present
  598. [ 2.734383] PM: Looking for hibernation image.
  599. [ 2.734805] PM: Image not found (code -22)
  600. [ 2.734810] PM: Hibernation image not present or could not be loaded.
  601. [ 2.797497] usb 5-8: New USB device found, idVendor=0ac8, idProduct=c326
  602. [ 2.797516] usb 5-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  603. [ 2.797529] usb 5-8: Product: Namuga 1.3M Webcam
  604. [ 2.797540] usb 5-8: Manufacturer: Vimicro Corp.
  605. [ 2.822951] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  606. [ 3.036146] usb 2-2: new full-speed USB device number 2 using uhci_hcd
  607. [ 3.210154] usb 2-2: New USB device found, idVendor=0a5c, idProduct=2101
  608. [ 3.210173] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  609. [ 3.210186] usb 2-2: Product: BCM92045NMD
  610. [ 3.210197] usb 2-2: Manufacturer: Broadcom Corp
  611. [ 3.210208] usb 2-2: SerialNumber: 002556C46485
  612. [ 4.202252] random: nonblocking pool is initialized
  613. [ 5.013289] udevd[380]: starting version 175
  614. [ 5.332413] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
  615. [ 5.332511] ACPI: Lid Switch [LID0]
  616. [ 5.332864] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
  617. [ 5.332884] ACPI: Power Button [PWRB]
  618. [ 5.333199] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
  619. [ 5.333211] ACPI: Sleep Button [SLPB]
  620. [ 5.333501] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
  621. [ 5.333513] ACPI: Power Button [PWRF]
  622. [ 5.347013] ACPI: AC Adapter [ADP1] (off-line)
  623. [ 5.350251] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
  624. [ 5.351988] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
  625. [ 5.449443] [drm] Initialized drm 1.1.0 20060810
  626. [ 5.527881] ACPI Warning: SystemIO range 0x000018a0-0x000018bf conflicts with OpRegion 0x000018a0-0x000018af (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
  627. [ 5.527904] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  628. [ 5.549235] ACPI: Battery Slot [BAT1] (battery present)
  629. [ 5.550081] intel_rng: FWH not detected
  630. [ 5.837625] cfg80211: Calling CRDA to update world regulatory domain
  631. [ 6.080957] [drm] Memory usable by graphics device = 256M
  632. [ 6.081929] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  633. [ 6.081937] [drm] Driver supports precise vblank timestamp query.
  634. [ 6.082104] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
  635. [ 6.114182] samsung_laptop: detected SABI interface: SwSmi@
  636. [ 6.150823] Bluetooth: Core ver 2.18
  637. [ 6.150906] NET: Registered protocol family 31
  638. [ 6.150913] Bluetooth: HCI device and connection manager initialized
  639. [ 6.150935] Bluetooth: HCI socket layer initialized
  640. [ 6.150948] Bluetooth: L2CAP socket layer initialized
  641. [ 6.150983] Bluetooth: SCO socket layer initialized
  642. [ 6.165741] [drm] initialized overlay support
  643. [ 6.187479] fbcon: inteldrmfb (fb0) is primary device
  644. [ 6.194261] usbcore: registered new interface driver btusb
  645. [ 6.448582] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 528222
  646. [ 6.496224] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
  647. [ 6.558881] Intel(R) Wireless WiFi driver for Linux, in-tree:
  648. [ 6.558883] Copyright(c) 2003- 2014 Intel Corporation
  649. [ 6.559315] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
  650. [ 6.559419] iwlwifi 0000:02:00.0: irq 43 for MSI/MSI-X
  651. [ 6.879058] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-5150-2.ucode
  652. [ 6.879508] iwlwifi 0000:02:00.0: loaded firmware version 8.24.2.2 op_mode iwldvm
  653. [ 6.951996] Console: switching to colour frame buffer device 128x37
  654. [ 6.959492] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  655. [ 6.959498] i915 0000:00:02.0: registered panic notifier
  656. [ 6.959535] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
  657. [ 6.959764] ACPI Warning: SystemIO range 0x00001028-0x0000102f conflicts with OpRegion 0x00001000-0x0000107f (\PMIO) (20131218/utaddress-258)
  658. [ 6.959782] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  659. [ 6.959792] ACPI Warning: SystemIO range 0x000011b0-0x000011bf conflicts with OpRegion 0x00001180-0x000011bb (\GPIO) (20131218/utaddress-258)
  660. [ 6.959806] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  661. [ 6.959812] ACPI Warning: SystemIO range 0x00001180-0x000011af conflicts with OpRegion 0x00001180-0x000011bb (\GPIO) (20131218/utaddress-258)
  662. [ 6.959825] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  663. [ 6.959830] lpc_ich: Resource conflict(s) found affecting gpio_ich
  664. [ 6.961498] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
  665. [ 6.991886] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
  666. [ 6.991899] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
  667. [ 6.991906] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
  668. [ 6.991914] iwlwifi 0000:02:00.0: Detected Intel(R) WiMAX/WiFi Link 5150 ABG, REV=0x44
  669. [ 6.992073] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
  670. [ 7.076136] leds_ss4200: no LED devices found
  671. [ 7.153307] iTCO_vendor_support: vendor-support=0
  672. [ 7.154528] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
  673. [ 7.154635] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
  674. [ 7.157081] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  675. [ 7.275054] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input14
  676. [ 7.283265] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
  677. [ 7.285828] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
  678. [ 7.304007] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
  679. [ 7.657345] cfg80211: World regulatory domain updated:
  680. [ 7.657356] cfg80211: DFS Master region: unset
  681. [ 7.657360] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  682. [ 7.657366] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  683. [ 7.657370] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  684. [ 7.657375] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
  685. [ 7.657379] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  686. [ 7.657384] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  687. [ 7.657388] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  688. [ 8.182083] media: Linux media interface: v0.10
  689. [ 8.361792] Linux video capture interface: v2.00
  690. [ 8.375312] i2400m_usb 5-3:1.0: WiMAX interface wmx0 (00:1d:e1:09:2c:72) ready
  691. [ 8.389953] uvcvideo: Found UVC 1.00 device Namuga 1.3M Webcam (0ac8:c326)
  692. [ 8.392795] input: Namuga 1.3M Webcam as /devices/pci0000:00/0000:00:1d.7/usb5/5-8/5-8:1.0/input/input17
  693. [ 8.393165] usbcore: registered new interface driver uvcvideo
  694. [ 8.393173] USB Video Class driver (1.1.1)
  695. [ 8.448656] i2400m_usb 5-3:1.0: firmware: direct-loading firmware i2400m-fw-usb-1.5.sbcf
  696. [ 8.836161] usb 3-1: new full-speed USB device number 2 using uhci_hcd
  697. [ 9.021230] usb 3-1: New USB device found, idVendor=046d, idProduct=c245
  698. [ 9.021249] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  699. [ 9.021263] usb 3-1: Product: Gaming Mouse G400
  700. [ 9.021274] usb 3-1: Manufacturer: Logitech
  701. [ 10.818650] i2400m_usb 5-3:1.0: firmware interface version 9.3.2
  702. [ 10.830474] usbcore: registered new interface driver i2400m_usb
  703. [ 10.951616] hidraw: raw HID events driver (C) Jiri Kosina
  704. [ 10.962156] usbcore: registered new interface driver usbhid
  705. [ 10.962166] usbhid: USB HID core driver
  706. [ 10.980989] input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/0003:046D:C245.0001/input/input18
  707. [ 10.981553] hid-generic 0003:046D:C245.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:00:1d.2-1/input0
  708. [ 10.987056] hid-generic 0003:046D:C245.0002: hiddev0,hidraw1: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:00:1d.2-1/input1
  709. [ 12.414157] Adding 2074620k swap on /dev/sda5. Priority:-1 extents:1 across:2074620k
  710. [ 12.457971] EXT4-fs (sda1): re-mounted. Opts: (null)
  711. [ 12.739435] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
  712. [ 13.255827] loop: module loaded
  713. [ 18.369517] Netfilter messages via NETLINK v0.30.
  714. [ 22.353349] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
  715. [ 22.356692] iwlwifi 0000:02:00.0: Radio type=0x1-0x1-0x0
  716. [ 22.493659] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
  717. [ 22.496776] iwlwifi 0000:02:00.0: Radio type=0x1-0x1-0x0
  718. [ 22.530070] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  719. [ 22.552340] sky2 0000:03:00.0 eth0: enabling interface
  720. [ 22.552925] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  721. [ 22.567725] IPv6: ADDRCONF(NETDEV_UP): wmx0: link is not ready
  722. [ 29.190029] wlan0: authenticate with cc:7b:36:b2:cf:33
  723. [ 29.193911] wlan0: send auth to cc:7b:36:b2:cf:33 (try 1/3)
  724. [ 29.196069] wlan0: authenticated
  725. [ 29.204090] wlan0: associate with cc:7b:36:b2:cf:33 (try 1/3)
  726. [ 29.206937] wlan0: RX AssocResp from cc:7b:36:b2:cf:33 (capab=0x431 status=0 aid=3)
  727. [ 29.217443] wlan0: associated
  728. [ 29.217546] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  729. [ 78.669105] wlan0: deauthenticating from cc:7b:36:b2:cf:33 by local choice (reason=3)
  730. [ 78.682901] cfg80211: Calling CRDA to update world regulatory domain
  731. [ 78.720728] cfg80211: World regulatory domain updated:
  732. [ 78.720742] cfg80211: DFS Master region: unset
  733. [ 78.720747] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  734. [ 78.720754] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  735. [ 78.720760] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  736. [ 78.720767] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
  737. [ 78.720773] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  738. [ 78.720778] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  739. [ 78.720784] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  740. [ 894.240231] usb 5-6: new high-speed USB device number 6 using ehci-pci
  741. [ 894.374351] usb 5-6: New USB device found, idVendor=8564, idProduct=1000
  742. [ 894.374370] usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  743. [ 894.374384] usb 5-6: Product: Mass Storage Device
  744. [ 894.374395] usb 5-6: Manufacturer: JetFlash
  745. [ 894.374406] usb 5-6: SerialNumber: 99AUVPP9JNVY28AX
  746. [ 894.442541] usb-storage 5-6:1.0: USB Mass Storage device detected
  747. [ 894.442848] scsi2 : usb-storage 5-6:1.0
  748. [ 894.443255] usbcore: registered new interface driver usb-storage
  749. [ 895.926990] scsi 2:0:0:0: Direct-Access JetFlash Transcend 16GB 1100 PQ: 0 ANSI: 4
  750. [ 895.928339] sd 2:0:0:0: Attached scsi generic sg1 type 0
  751. [ 895.929771] sd 2:0:0:0: [sdb] 31696896 512-byte logical blocks: (16.2 GB/15.1 GiB)
  752. [ 895.930635] sd 2:0:0:0: [sdb] Write Protect is off
  753. [ 895.930650] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
  754. [ 895.931510] sd 2:0:0:0: [sdb] No Caching mode page found
  755. [ 895.931526] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  756. [ 895.940172] sd 2:0:0:0: [sdb] No Caching mode page found
  757. [ 895.940187] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  758. [ 895.941375] sdb: sdb1 sdb2
  759. [ 895.947156] sd 2:0:0:0: [sdb] No Caching mode page found
  760. [ 895.947173] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  761. [ 895.947188] sd 2:0:0:0: [sdb] Attached SCSI removable disk
  762. [ 896.453308] FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  763. [ 896.514019] fuse init (API version 7.22)
  764. [ 896.549732] FAT-fs (sdb2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  765. [ 921.722685] perf samples too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
  766. [ 931.376050] usb 5-6: USB disconnect, device number 6
  767. [ 980.604191] usb 5-6: new high-speed USB device number 7 using ehci-pci
  768. [ 980.738543] usb 5-6: New USB device found, idVendor=8564, idProduct=1000
  769. [ 980.738563] usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  770. [ 980.738576] usb 5-6: Product: Mass Storage Device
  771. [ 980.738587] usb 5-6: Manufacturer: JetFlash
  772. [ 980.738598] usb 5-6: SerialNumber: 99AUVPP9JNVY28AX
  773. [ 980.739810] usb-storage 5-6:1.0: USB Mass Storage device detected
  774. [ 980.742386] scsi3 : usb-storage 5-6:1.0
  775. [ 982.216180] scsi 3:0:0:0: Direct-Access JetFlash Transcend 16GB 1100 PQ: 0 ANSI: 4
  776. [ 982.218411] sd 3:0:0:0: Attached scsi generic sg1 type 0
  777. [ 982.221084] sd 3:0:0:0: [sdc] 31696896 512-byte logical blocks: (16.2 GB/15.1 GiB)
  778. [ 982.221955] sd 3:0:0:0: [sdc] Write Protect is off
  779. [ 982.221972] sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00
  780. [ 982.222808] sd 3:0:0:0: [sdc] No Caching mode page found
  781. [ 982.222821] sd 3:0:0:0: [sdc] Assuming drive cache: write through
  782. [ 982.230191] sd 3:0:0:0: [sdc] No Caching mode page found
  783. [ 982.230208] sd 3:0:0:0: [sdc] Assuming drive cache: write through
  784. [ 982.231452] sdc: sdc1 sdc2
  785. [ 982.235199] sd 3:0:0:0: [sdc] No Caching mode page found
  786. [ 982.235214] sd 3:0:0:0: [sdc] Assuming drive cache: write through
  787. [ 982.235227] sd 3:0:0:0: [sdc] Attached SCSI removable disk
  788. [ 982.599282] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  789. [ 982.788208] FAT-fs (sdc2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  790. [ 982.812557] FAT-fs (sdc2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  791. [ 1011.189977] usb 5-6: USB disconnect, device number 7
  792. [ 1011.336234] FAT-fs (sdc1): unable to read boot sector to mark fs as dirty
  793. [ 3671.860201] usb 5-6: new high-speed USB device number 8 using ehci-pci
  794. [ 3671.994286] usb 5-6: New USB device found, idVendor=8564, idProduct=1000
  795. [ 3671.994305] usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  796. [ 3671.994319] usb 5-6: Product: Mass Storage Device
  797. [ 3671.994330] usb 5-6: Manufacturer: JetFlash
  798. [ 3671.994341] usb 5-6: SerialNumber: 99AUVPP9JNVY28AX
  799. [ 3671.995579] usb-storage 5-6:1.0: USB Mass Storage device detected
  800. [ 3671.997944] scsi4 : usb-storage 5-6:1.0
  801. [ 3673.470724] scsi 4:0:0:0: Direct-Access JetFlash Transcend 16GB 1100 PQ: 0 ANSI: 4
  802. [ 3673.474739] sd 4:0:0:0: Attached scsi generic sg1 type 0
  803. [ 3673.480580] sd 4:0:0:0: [sdc] 31696896 512-byte logical blocks: (16.2 GB/15.1 GiB)
  804. [ 3673.481481] sd 4:0:0:0: [sdc] Write Protect is off
  805. [ 3673.481497] sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00
  806. [ 3673.482332] sd 4:0:0:0: [sdc] No Caching mode page found
  807. [ 3673.482348] sd 4:0:0:0: [sdc] Assuming drive cache: write through
  808. [ 3673.488593] sd 4:0:0:0: [sdc] No Caching mode page found
  809. [ 3673.488610] sd 4:0:0:0: [sdc] Assuming drive cache: write through
  810. [ 3673.489864] sdc: sdc1 sdc2
  811. [ 3673.495702] sd 4:0:0:0: [sdc] No Caching mode page found
  812. [ 3673.495717] sd 4:0:0:0: [sdc] Assuming drive cache: write through
  813. [ 3673.495730] sd 4:0:0:0: [sdc] Attached SCSI removable disk
  814. [ 3673.783026] FAT-fs (sdc2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  815. [ 3673.809222] FAT-fs (sdc2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  816. [ 3674.180213] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  817. [ 3674.184664] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  818. [ 3677.291993] perf samples too long (5030 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
  819. [ 3777.081252] usb 5-6: USB disconnect, device number 8
  820. [ 5974.979183] wlan0: authenticate with d8:eb:97:a0:4f:38
  821. [ 5974.982267] wlan0: send auth to d8:eb:97:a0:4f:38 (try 1/3)
  822. [ 5974.984132] wlan0: authenticated
  823. [ 5974.985373] wlan0: waiting for beacon from d8:eb:97:a0:4f:38
  824. [ 5975.000160] wlan0: associate with d8:eb:97:a0:4f:38 (try 1/3)
  825. [ 5975.003426] wlan0: RX AssocResp from d8:eb:97:a0:4f:38 (capab=0x401 status=0 aid=1)
  826. [ 5975.005951] wlan0: associated
  827. [ 6401.187295] cfg80211: Calling CRDA to update world regulatory domain
  828. [ 6401.212081] cfg80211: World regulatory domain updated:
  829. [ 6401.212093] cfg80211: DFS Master region: unset
  830. [ 6401.212098] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  831. [ 6401.212106] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  832. [ 6401.212111] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  833. [ 6401.212115] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
  834. [ 6401.212120] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  835. [ 6401.212124] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  836. [ 6401.212129] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  837. [ 6412.627344] wlan0: authenticate with d8:eb:97:a0:4f:38
  838. [ 6412.630191] wlan0: send auth to d8:eb:97:a0:4f:38 (try 1/3)
  839. [ 6412.632073] wlan0: authenticated
  840. [ 6412.633617] wlan0: waiting for beacon from d8:eb:97:a0:4f:38
  841. [ 6412.672133] wlan0: associate with d8:eb:97:a0:4f:38 (try 1/3)
  842. [ 6412.676787] wlan0: RX AssocResp from d8:eb:97:a0:4f:38 (capab=0x401 status=0 aid=1)
  843. [ 6412.679129] wlan0: associated
  844. [ 6836.996106] iwlwifi 0000:02:00.0: fail to flush all tx fifo queues Q 2
  845. [ 6836.996133] iwlwifi 0000:02:00.0: Current SW read_ptr 80 write_ptr 253
  846. [ 6836.996199] iwl data: 00000000: 00 00 ff ff 00 00 00 00 00 00 00 00 00 00 00 00 ................
  847. [ 6836.996260] iwlwifi 0000:02:00.0: FH TRBs(0) = 0x00000000
  848. [ 6836.996308] iwlwifi 0000:02:00.0: FH TRBs(1) = 0x8010205f
  849. [ 6836.996354] iwlwifi 0000:02:00.0: FH TRBs(2) = 0x00000000
  850. [ 6836.996400] iwlwifi 0000:02:00.0: FH TRBs(3) = 0x80300023
  851. [ 6836.996446] iwlwifi 0000:02:00.0: FH TRBs(4) = 0x00000000
  852. [ 6836.996492] iwlwifi 0000:02:00.0: FH TRBs(5) = 0x00000000
  853. [ 6836.996538] iwlwifi 0000:02:00.0: FH TRBs(6) = 0x00000000
  854. [ 6836.996584] iwlwifi 0000:02:00.0: FH TRBs(7) = 0x0070407d
  855. [ 6836.996677] iwlwifi 0000:02:00.0: Q 0 is active and mapped to fifo 3 ra_tid 0x0000 [36,36]
  856. [ 6836.996769] iwlwifi 0000:02:00.0: Q 1 is active and mapped to fifo 2 ra_tid 0x0000 [0,0]
  857. [ 6836.996860] iwlwifi 0000:02:00.0: Q 2 is active and mapped to fifo 1 ra_tid 0x0000 [80,253]
  858. [ 6836.996951] iwlwifi 0000:02:00.0: Q 3 is active and mapped to fifo 0 ra_tid 0x0000 [0,0]
  859. [ 6836.997043] iwlwifi 0000:02:00.0: Q 4 is active and mapped to fifo 7 ra_tid 0x0000 [126,126]
  860. [ 6836.997133] iwlwifi 0000:02:00.0: Q 5 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  861. [ 6836.997224] iwlwifi 0000:02:00.0: Q 6 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  862. [ 6836.997316] iwlwifi 0000:02:00.0: Q 7 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  863. [ 6836.997407] iwlwifi 0000:02:00.0: Q 8 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  864. [ 6836.997498] iwlwifi 0000:02:00.0: Q 9 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  865. [ 6836.997589] iwlwifi 0000:02:00.0: Q 10 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  866. [ 6836.997680] iwlwifi 0000:02:00.0: Q 11 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  867. [ 6836.997771] iwlwifi 0000:02:00.0: Q 12 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  868. [ 6836.997863] iwlwifi 0000:02:00.0: Q 13 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  869. [ 6836.997954] iwlwifi 0000:02:00.0: Q 14 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  870. [ 6836.998046] iwlwifi 0000:02:00.0: Q 15 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  871. [ 6836.998137] iwlwifi 0000:02:00.0: Q 16 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  872. [ 6836.998229] iwlwifi 0000:02:00.0: Q 17 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  873. [ 6836.998320] iwlwifi 0000:02:00.0: Q 18 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  874. [ 6836.998412] iwlwifi 0000:02:00.0: Q 19 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  875. [ 7105.008181] iwlwifi 0000:02:00.0: fail to flush all tx fifo queues Q 2
  876. [ 7105.008209] iwlwifi 0000:02:00.0: Current SW read_ptr 164 write_ptr 225
  877. [ 7105.008282] iwl data: 00000000: 00 00 00 00 00 00 00 00 f0 ff 0f 00 00 00 00 00 ................
  878. [ 7105.008339] iwlwifi 0000:02:00.0: FH TRBs(0) = 0x00000000
  879. [ 7105.008392] iwlwifi 0000:02:00.0: FH TRBs(1) = 0x801020b3
  880. [ 7105.008444] iwlwifi 0000:02:00.0: FH TRBs(2) = 0x00000000
  881. [ 7105.008512] iwlwifi 0000:02:00.0: FH TRBs(3) = 0x80300026
  882. [ 7105.008580] iwlwifi 0000:02:00.0: FH TRBs(4) = 0x00000000
  883. [ 7105.008641] iwlwifi 0000:02:00.0: FH TRBs(5) = 0x00000000
  884. [ 7105.008691] iwlwifi 0000:02:00.0: FH TRBs(6) = 0x00000000
  885. [ 7105.008742] iwlwifi 0000:02:00.0: FH TRBs(7) = 0x007040ab
  886. [ 7105.008960] iwlwifi 0000:02:00.0: Q 0 is active and mapped to fifo 3 ra_tid 0x0000 [39,39]
  887. [ 7105.009111] iwlwifi 0000:02:00.0: Q 1 is active and mapped to fifo 2 ra_tid 0x0000 [0,0]
  888. [ 7105.009207] iwlwifi 0000:02:00.0: Q 2 is active and mapped to fifo 1 ra_tid 0x0000 [164,225]
  889. [ 7105.009299] iwlwifi 0000:02:00.0: Q 3 is active and mapped to fifo 0 ra_tid 0x0000 [0,0]
  890. [ 7105.009390] iwlwifi 0000:02:00.0: Q 4 is active and mapped to fifo 7 ra_tid 0x0000 [172,172]
  891. [ 7105.009482] iwlwifi 0000:02:00.0: Q 5 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  892. [ 7105.009573] iwlwifi 0000:02:00.0: Q 6 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  893. [ 7105.009665] iwlwifi 0000:02:00.0: Q 7 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  894. [ 7105.009756] iwlwifi 0000:02:00.0: Q 8 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  895. [ 7105.009847] iwlwifi 0000:02:00.0: Q 9 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  896. [ 7105.009939] iwlwifi 0000:02:00.0: Q 10 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  897. [ 7105.010030] iwlwifi 0000:02:00.0: Q 11 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  898. [ 7105.010121] iwlwifi 0000:02:00.0: Q 12 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  899. [ 7105.010213] iwlwifi 0000:02:00.0: Q 13 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  900. [ 7105.010304] iwlwifi 0000:02:00.0: Q 14 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  901. [ 7105.010396] iwlwifi 0000:02:00.0: Q 15 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  902. [ 7105.010488] iwlwifi 0000:02:00.0: Q 16 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  903. [ 7105.010579] iwlwifi 0000:02:00.0: Q 17 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  904. [ 7105.010671] iwlwifi 0000:02:00.0: Q 18 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  905. [ 7105.010762] iwlwifi 0000:02:00.0: Q 19 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  906. [ 7113.008085] iwlwifi 0000:02:00.0: fail to flush all tx fifo queues Q 2
  907. [ 7113.008101] iwlwifi 0000:02:00.0: Current SW read_ptr 231 write_ptr 166
  908. [ 7113.008152] iwl data: 00000000: 00 00 00 00 00 00 00 00 80 ff 7f 00 00 00 00 00 ................
  909. [ 7113.008198] iwlwifi 0000:02:00.0: FH TRBs(0) = 0x00000000
  910. [ 7113.008243] iwlwifi 0000:02:00.0: FH TRBs(1) = 0x801020f6
  911. [ 7113.008288] iwlwifi 0000:02:00.0: FH TRBs(2) = 0x00000000
  912. [ 7113.008332] iwlwifi 0000:02:00.0: FH TRBs(3) = 0x80300027
  913. [ 7113.008377] iwlwifi 0000:02:00.0: FH TRBs(4) = 0x00000000
  914. [ 7113.008422] iwlwifi 0000:02:00.0: FH TRBs(5) = 0x00000000
  915. [ 7113.008466] iwlwifi 0000:02:00.0: FH TRBs(6) = 0x00000000
  916. [ 7113.008512] iwlwifi 0000:02:00.0: FH TRBs(7) = 0x007040b3
  917. [ 7113.008608] iwlwifi 0000:02:00.0: Q 0 is active and mapped to fifo 3 ra_tid 0x0000 [40,40]
  918. [ 7113.008699] iwlwifi 0000:02:00.0: Q 1 is active and mapped to fifo 2 ra_tid 0x0000 [0,0]
  919. [ 7113.008789] iwlwifi 0000:02:00.0: Q 2 is active and mapped to fifo 1 ra_tid 0x0000 [231,166]
  920. [ 7113.008880] iwlwifi 0000:02:00.0: Q 3 is active and mapped to fifo 0 ra_tid 0x0000 [0,0]
  921. [ 7113.008969] iwlwifi 0000:02:00.0: Q 4 is active and mapped to fifo 7 ra_tid 0x0000 [180,180]
  922. [ 7113.009061] iwlwifi 0000:02:00.0: Q 5 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  923. [ 7113.009152] iwlwifi 0000:02:00.0: Q 6 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  924. [ 7113.009243] iwlwifi 0000:02:00.0: Q 7 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  925. [ 7113.009335] iwlwifi 0000:02:00.0: Q 8 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  926. [ 7113.009427] iwlwifi 0000:02:00.0: Q 9 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  927. [ 7113.009519] iwlwifi 0000:02:00.0: Q 10 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  928. [ 7113.009608] iwlwifi 0000:02:00.0: Q 11 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  929. [ 7113.009696] iwlwifi 0000:02:00.0: Q 12 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  930. [ 7113.009786] iwlwifi 0000:02:00.0: Q 13 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  931. [ 7113.009875] iwlwifi 0000:02:00.0: Q 14 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  932. [ 7113.009965] iwlwifi 0000:02:00.0: Q 15 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  933. [ 7113.010055] iwlwifi 0000:02:00.0: Q 16 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  934. [ 7113.010145] iwlwifi 0000:02:00.0: Q 17 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  935. [ 7113.010235] iwlwifi 0000:02:00.0: Q 18 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  936. [ 7113.010326] iwlwifi 0000:02:00.0: Q 19 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  937. [ 7116.008152] iwlwifi 0000:02:00.0: fail to flush all tx fifo queues Q 2
  938. [ 7116.008180] iwlwifi 0000:02:00.0: Current SW read_ptr 251 write_ptr 166
  939. [ 7116.008266] iwl data: 00000000: ff 07 00 00 00 00 00 00 00 00 00 f8 00 00 00 00 ................
  940. [ 7116.008314] iwlwifi 0000:02:00.0: FH TRBs(0) = 0x00000000
  941. [ 7116.008361] iwlwifi 0000:02:00.0: FH TRBs(1) = 0x8010200a
  942. [ 7116.008406] iwlwifi 0000:02:00.0: FH TRBs(2) = 0x00000000
  943. [ 7116.008452] iwlwifi 0000:02:00.0: FH TRBs(3) = 0x80300028
  944. [ 7116.008498] iwlwifi 0000:02:00.0: FH TRBs(4) = 0x00000000
  945. [ 7116.008544] iwlwifi 0000:02:00.0: FH TRBs(5) = 0x00000000
  946. [ 7116.008590] iwlwifi 0000:02:00.0: FH TRBs(6) = 0x00000000
  947. [ 7116.008636] iwlwifi 0000:02:00.0: FH TRBs(7) = 0x007040b5
  948. [ 7116.008728] iwlwifi 0000:02:00.0: Q 0 is active and mapped to fifo 3 ra_tid 0x0000 [41,41]
  949. [ 7116.008820] iwlwifi 0000:02:00.0: Q 1 is active and mapped to fifo 2 ra_tid 0x0000 [0,0]
  950. [ 7116.008911] iwlwifi 0000:02:00.0: Q 2 is active and mapped to fifo 1 ra_tid 0x0000 [251,166]
  951. [ 7116.009003] iwlwifi 0000:02:00.0: Q 3 is active and mapped to fifo 0 ra_tid 0x0000 [0,0]
  952. [ 7116.009094] iwlwifi 0000:02:00.0: Q 4 is active and mapped to fifo 7 ra_tid 0x0000 [182,182]
  953. [ 7116.009185] iwlwifi 0000:02:00.0: Q 5 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  954. [ 7116.009277] iwlwifi 0000:02:00.0: Q 6 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  955. [ 7116.009368] iwlwifi 0000:02:00.0: Q 7 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  956. [ 7116.009459] iwlwifi 0000:02:00.0: Q 8 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  957. [ 7116.009551] iwlwifi 0000:02:00.0: Q 9 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  958. [ 7116.009642] iwlwifi 0000:02:00.0: Q 10 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  959. [ 7116.009734] iwlwifi 0000:02:00.0: Q 11 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  960. [ 7116.009826] iwlwifi 0000:02:00.0: Q 12 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  961. [ 7116.009918] iwlwifi 0000:02:00.0: Q 13 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  962. [ 7116.010010] iwlwifi 0000:02:00.0: Q 14 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  963. [ 7116.010101] iwlwifi 0000:02:00.0: Q 15 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  964. [ 7116.010192] iwlwifi 0000:02:00.0: Q 16 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  965. [ 7116.010284] iwlwifi 0000:02:00.0: Q 17 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  966. [ 7116.010375] iwlwifi 0000:02:00.0: Q 18 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  967. [ 7116.010467] iwlwifi 0000:02:00.0: Q 19 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  968. [ 7128.184337] usb 3-1: USB disconnect, device number 2
  969. [ 7162.424110] iwlwifi 0000:02:00.0: fail to flush all tx fifo queues Q 2
  970. [ 7162.424138] iwlwifi 0000:02:00.0: Current SW read_ptr 29 write_ptr 60
  971. [ 7162.424200] iwl data: 00000000: 00 00 00 e0 00 00 00 00 ff 1f 00 00 00 00 00 00 ................
  972. [ 7162.424248] iwlwifi 0000:02:00.0: FH TRBs(0) = 0x00000000
  973. [ 7162.424294] iwlwifi 0000:02:00.0: FH TRBs(1) = 0x8010202c
  974. [ 7162.424340] iwlwifi 0000:02:00.0: FH TRBs(2) = 0x00000000
  975. [ 7162.424386] iwlwifi 0000:02:00.0: FH TRBs(3) = 0x80300029
  976. [ 7162.424432] iwlwifi 0000:02:00.0: FH TRBs(4) = 0x00000000
  977. [ 7162.424479] iwlwifi 0000:02:00.0: FH TRBs(5) = 0x00000000
  978. [ 7162.424524] iwlwifi 0000:02:00.0: FH TRBs(6) = 0x00000000
  979. [ 7162.424571] iwlwifi 0000:02:00.0: FH TRBs(7) = 0x00704011
  980. [ 7162.424664] iwlwifi 0000:02:00.0: Q 0 is active and mapped to fifo 3 ra_tid 0x0000 [42,42]
  981. [ 7162.424756] iwlwifi 0000:02:00.0: Q 1 is active and mapped to fifo 2 ra_tid 0x0000 [0,0]
  982. [ 7162.424847] iwlwifi 0000:02:00.0: Q 2 is active and mapped to fifo 1 ra_tid 0x0000 [29,60]
  983. [ 7162.424938] iwlwifi 0000:02:00.0: Q 3 is active and mapped to fifo 0 ra_tid 0x0000 [0,0]
  984. [ 7162.425030] iwlwifi 0000:02:00.0: Q 4 is active and mapped to fifo 7 ra_tid 0x0000 [18,18]
  985. [ 7162.425121] iwlwifi 0000:02:00.0: Q 5 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  986. [ 7162.425212] iwlwifi 0000:02:00.0: Q 6 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  987. [ 7162.425304] iwlwifi 0000:02:00.0: Q 7 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  988. [ 7162.425395] iwlwifi 0000:02:00.0: Q 8 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  989. [ 7162.425486] iwlwifi 0000:02:00.0: Q 9 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  990. [ 7162.425578] iwlwifi 0000:02:00.0: Q 10 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  991. [ 7162.425669] iwlwifi 0000:02:00.0: Q 11 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  992. [ 7162.425761] iwlwifi 0000:02:00.0: Q 12 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  993. [ 7162.425853] iwlwifi 0000:02:00.0: Q 13 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  994. [ 7162.425945] iwlwifi 0000:02:00.0: Q 14 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  995. [ 7162.426037] iwlwifi 0000:02:00.0: Q 15 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  996. [ 7162.426128] iwlwifi 0000:02:00.0: Q 16 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  997. [ 7162.426220] iwlwifi 0000:02:00.0: Q 17 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  998. [ 7162.426312] iwlwifi 0000:02:00.0: Q 18 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  999. [ 7162.426403] iwlwifi 0000:02:00.0: Q 19 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
  1000. [ 7673.005302] wlan0: deauthenticating from d8:eb:97:a0:4f:38 by local choice (reason=3)
  1001. [ 7673.014211] cfg80211: Calling CRDA to update world regulatory domain
  1002. [ 7673.194103] cfg80211: World regulatory domain updated:
  1003. [ 7673.194115] cfg80211: DFS Master region: unset
  1004. [ 7673.194120] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  1005. [ 7673.194128] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  1006. [ 7673.194135] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  1007. [ 7673.194142] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
  1008. [ 7673.194149] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  1009. [ 7673.194156] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  1010. [ 7673.194164] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  1011. [ 7813.820184] usb 5-5: new high-speed USB device number 9 using ehci-pci
  1012. [ 7813.954066] usb 5-5: New USB device found, idVendor=0bda, idProduct=8178
  1013. [ 7813.954086] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1014. [ 7813.954100] usb 5-5: Product: USB WLAN
  1015. [ 7813.954111] usb 5-5: Manufacturer: Realtek
  1016. [ 7813.954122] usb 5-5: SerialNumber: 00e04c000001
  1017. [ 8935.580228] usb 3-2: new full-speed USB device number 3 using uhci_hcd
  1018. [ 8935.969244] usb 3-2: New USB device found, idVendor=046d, idProduct=c245
  1019. [ 8935.969264] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1020. [ 8935.969278] usb 3-2: Product: Gaming Mouse G400
  1021. [ 8935.969289] usb 3-2: Manufacturer: Logitech
  1022. [ 8935.980862] input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/0003:046D:C245.0003/input/input19
  1023. [ 8935.982041] hid-generic 0003:046D:C245.0003: input,hidraw0: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:00:1d.2-2/input0
  1024. [ 8935.989891] hid-generic 0003:046D:C245.0004: hiddev0,hidraw1: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:00:1d.2-2/input1
  1025. [ 9229.974532] usb 5-5: USB disconnect, device number 9
  1026. [ 9231.520194] usb 5-5: new high-speed USB device number 11 using ehci-pci
  1027. [ 9231.653935] usb 5-5: New USB device found, idVendor=0bda, idProduct=8178
  1028. [ 9231.653955] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1029. [ 9231.653968] usb 5-5: Product: USB WLAN
  1030. [ 9231.653979] usb 5-5: Manufacturer: Realtek
  1031. [ 9231.653990] usb 5-5: SerialNumber: 00e04c000001
  1032. [ 9231.720376] usb 3-2: USB disconnect, device number 3
  1033. [ 9321.720170] usb 1-1: new full-speed USB device number 2 using uhci_hcd
  1034. [ 9321.903250] usb 1-1: New USB device found, idVendor=046d, idProduct=c245
  1035. [ 9321.903271] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1036. [ 9321.903284] usb 1-1: Product: Gaming Mouse G400
  1037. [ 9321.903296] usb 1-1: Manufacturer: Logitech
  1038. [ 9321.916215] input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/0003:046D:C245.0005/input/input20
  1039. [ 9321.917441] hid-generic 0003:046D:C245.0005: input,hidraw0: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:00:1d.0-1/input0
  1040. [ 9321.928476] hid-generic 0003:046D:C245.0006: hiddev0,hidraw1: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:00:1d.0-1/input1
  1041. root@DedSec:~#
Advertisement
Add Comment
Please, Sign In to add comment