TRENDnet_TEW-827DRU_v1.0R_oem_console_uboot_info.log

U-Boot 2012.07 [Standard IPQ806X.LN,r40331] (Nov 17 2015 - 19:33:37)

smem ram ptable found: ver: 0 len: 5
DRAM:  491 MiB
NAND:  SF: Unsupported manufacturer 00
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
256 MiB
MMC:
PCI0 Link Intialized
PCI1 Link Intialized
In:    serial
Out:   serial
Err:   serial
cdp: get part failed for 0:HLOS
Net:   MAC1 addr:x:x:xx:xx:xx:1
athrs17_reg_init: complete
athrs17_vlan_config ...done
S17c init  done
MAC2 addr:x:x:xx:xx:xx:2
eth0, eth1
Hit any key to stop autoboot:  0
(IPQ) #
(IPQ) #
(IPQ) # help
?       - alias for 'help'
base    - print or set address offset
bootipq - bootipq from flash device
bootm   - boot application image from memory
bootmbn - bootmbn from flash device
bootp   - boot image via network using BOOTP/TFTP protocol
bootz   - boot Linux zImage image from memory
chpart  - change active partition
cmp     - memory compare
cp      - memory copy
crc32   - checksum calculation
dhcp    - boot image via network using DHCP/TFTP protocol
dumpipq_data- dumpipq_data crashdump collection from memory
echo    - echo args to console
env     - environment handling commands
exit    - exit script
false   - do nothing, unsuccessfully
fdt     - flattened device tree utility commands
go      - start application at address 'addr'
gpio    - input/set/clear/toggle gpio pins
help    - print command description/usage
i2c     - I2C sub-system
iminfo  - print header information for application image
imxtract- extract a part of a multi-image
ipq_nand- Switch between SBL and Linux kernel page layout.
loop    - infinite loop on address range
md      - memory display
mii     - MII utility commands
mm      - memory modify (auto-incrementing address)
mmc     - MMC sub system
mmcinfo - display MMC info
mphyrd  - qca8511 packet processor PHY register display
mphyrw  - qca8511 packet processor PHY register write (fill)
mprd    - qca8511 packet processor register display
mprw    - qca8511 packet processor register write (fill)
mtdparts- define flash/nand partitions
mtest   - simple RAM read/write test
mw      - memory write (fill)
nand    - NAND sub-system
nboot   - boot from NAND device
nm      - memory modify (constant address)
pci     - list and access PCI Configuration Space
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv  - set environment variables
sf      - SPI flash sub-system
showvar - print local hushshell variables
smeminfo- print SMEM FLASH information
source  - run script from memory
test    - minimal test like /bin/sh
tftpboot- boot image via network using TFTP protocol
tftpput - TFTP put command, for uploading files to a server
true    - do nothing, successfully
ubi     - ubi commands
usb     - USB sub-system
usbboot - boot from USB device
version - print monitor, compiler and linker version
(IPQ) #
(IPQ) # version

U-Boot 2012.07 [Standard IPQ806X.LN,r40331] (Nov 17 2015 - 19:33:37)
arm-openwrt-linux-uclibcgnueabi-gcc (Linaro GCC 4.6-2012.02) 4.6.3 20120201 (prerelease)
GNU ld (GNU Binutils) 2.22
(IPQ) #
(IPQ) # smeminfo
smem: SMEM_PARTITION_TABLE_OFFSET failed
flash_type:             0x2
flash_index:            0x0
flash_chip_select:      0x0
flash_block_size:       0x20000
partition table offset 0x0
No.: Name             Attributes            Start             Size
  0: 0:SBL1           0x0000ffff              0x0          0x40000
  1: 0:MIBIB          0x0000ffff          0x40000         0x140000
  2: 0:SBL2           0x0000ffff         0x180000         0x140000
  3: 0:SBL3           0x0000ffff         0x2c0000         0x280000
  4: 0:DDRCONFIG      0x0000ffff         0x540000         0x120000
  5: 0:SSD            0x0000ffff         0x660000         0x120000
  6: 0:TZ             0x0000ffff         0x780000         0x280000
  7: 0:RPM            0x0000ffff         0xa00000         0x280000
  8: 0:APPSBL         0x0000ffff        0x53a0000         0x500000
  9: 0:APPSBLENV      0x0000ffff        0x1180000          0x80000
 10: 0:ART            0x0000ffff        0x1200000         0x140000
 11: rootfs           0x0000ffff        0x58a0000        0x4000000
 12: 0:BOOTCONFIG     0x0000ffff        0x5340000          0x60000
 13: 0:APPSBL_1       0x0000ffff         0xc80000         0x500000
 14: rootfs_1         0x0000ffff        0x1340000        0x4000000
(IPQ) # showvar
HUSH_VERSION=0.01
(IPQ) # printenv
admin_password=KVD5J32$
baudrate=115200
board_id=2015B210xxxx
bootargs=console=ttyHSL1,115200n8
bootcmd=bootipq
bootdelay=2
debug=1
ethact=eth0
hw_version=V1.0R
lan_mac=aa:bb:cc:xx:yy:zz
machid=1260
stderr=serial
stdin=serial
stdout=serial
wan_mac=aa:bb:cc:xx:yy:zz
wlan0_domain=0x10
wlan0_psk_pass_phrase=82704200821
wlan0_ssid=TRENDnet827_2.4GHz_BJ3K
wlan1_psk_pass_phrase=82704200821
wlan1_ssid=TRENDnet827_5GHz_BJ5K
wps_pin=5566xxxx

Environment size: 480/262140 bytes