Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2013.10-rc3 (Nov 12 2014 - 23:22:50)
- Board: ci20 (Ingenic XBurst JZ4780 SoC)
- DRAM: 1 GiB
- NAND: 8192 MiB
- MMC: jz_mmc msc1: 0
- *** Warning - bad CRC, using default environment
- In: eserial4
- Out: eserial4
- Err: eserial4
- Net: dm9000
- Hit any key to stop autoboot: 2 1 0
- 2691962 bytes read in 746 ms (3.4 MiB/s)
- ## Booting kernel from Legacy Image at 88000000 ...
- Image Name: MIPS OpenWrt Linux-3.18
- Image Type: MIPS Linux Kernel Image (gzip compressed)
- Data Size: 2691898 Bytes = 2.6 MiB
- Load Address: 80010000
- Entry Point: 80015340
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- Starting kernel ...
- [ 0.000000] Linux version 3.18.0 (taxodium@VAUXO) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r43589) ) #2 SMP Wed Dec 10 11:01:51 CET 2014
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU0 revision is: 3ee1024f (Ingenic JZRISC)
- [ 0.000000] FPU revision is: 00330000
- [ 0.000000] MIPS: machine is img,ci20
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 10000000 @ 00000000 (usable)
- [ 0.000000] memory: 30000000 @ 30000000 (usable)
- [ 0.000000] User-defined physical RAM map:
- [ 0.000000] memory: 10000000 @ 00000000 (usable)
- [ 0.000000] memory: 30000000 @ 30000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x00000000-0x1fffffff]
- [ 0.000000] HighMem [mem 0x20000000-0x5fffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x0fffffff]
- [ 0.000000] node 0: [mem 0x30000000-0x5fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x5fffffff]
- [ 0.000000] On node 0 totalpages: 262144
- [ 0.000000] free_area_init_node: node 0, pgdat 80537940, node_mem_map 81012000
- [ 0.000000] Normal zone: 1024 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 65536 pages, LIFO batch:15
- [ 0.000000] HighMem zone: 2048 pages used for memmap
- [ 0.000000] HighMem zone: 196608 pages, LIFO batch:31
- [ 0.000000] Primary instruction cache 32kB, VIPT, 8-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 8-way, VIPT, no aliases, linesize 32 bytes
- [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
- [ 0.000000] PERCPU: Embedded 9 pages/cpu @81c19000 s6208 r8192 d22464 u36864
- [ 0.000000] pcpu-alloc: s6208 r8192 d22464 u36864 alloc=9*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 261120
- [ 0.000000] Kernel command line: console=ttyS0,115200n8 mem=256M@0x0 mem=768M@0x30000000 clk_ignore_unused root=/dev/sda3 rootfstype=ext4 rootwait debug
- [ 0.000000] log_buf_len individual max cpu contribution: 2097152 bytes
- [ 0.000000] log_buf_len total cpu_extra contributions: 2097152 bytes
- [ 0.000000] log_buf_len min size: 2097152 bytes
- [ 0.000000] log_buf_len: 4194304 bytes
- [ 0.000000] early log buf free: 2094664(99%)
- [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Crashlog failed to allocate RAM at address 0x1ff00000
- [ 0.000000] Memory: 1023968K/1048576K available (4298K kernel code, 188K rwdata, 896K rodata, 236K init, 2148K bss, 24608K reserved, 786432K highmem)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:256
- [ 0.000000] jz4780-tcu-clocksource: OST rate is 3000000Hz
- [ 0.000000] Calibrating delay loop... 958.46 BogoMIPS (lpj=1916928)
- [ 0.020000] pid_max: default: 32768 minimum: 301
- [ 0.024000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.028000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.032000] CPU1 revision is: 3ee1024f (Ingenic JZRISC)
- [ 0.032000] FPU revision is: 00330100
- [ 0.032000] Primary instruction cache 32kB, VIPT, 8-way, linesize 32 bytes.
- [ 0.032000] Primary data cache 32kB, 8-way, VIPT, no aliases, linesize 32 bytes
- [ 0.032000] MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
- [ 0.100000] Brought up 2 CPUs
- [ 0.116000] device: 'platform': device_add
- [ 0.120000] bus: 'platform': registered
- [ 0.124000] bus: 'cpu': registered
- [ 0.124000] device: 'cpu': device_add
- [ 0.128000] bus: 'container': registered
- [ 0.132000] device: 'container': device_add
- [ 0.136000] bus: 'workqueue': registered
- [ 0.140000] device: 'workqueue': device_add
- [ 0.144000] pinctrl core: initialized pinctrl subsystem
- [ 0.148000] device class 'regulator': registering
- [ 0.152000] Registering platform device 'reg-dummy'. Parent at platform
- [ 0.156000] device: 'reg-dummy': device_add
- [ 0.160000] bus: 'platform': add device reg-dummy
- [ 0.164000] bus: 'platform': add driver reg-dummy
- [ 0.168000] bus: 'platform': driver_probe_device: matched device reg-dummy with driver reg-dummy
- [ 0.172000] bus: 'platform': really_probe: probing driver reg-dummy with device reg-dummy
- [ 0.176000] reg-dummy reg-dummy: no of_node; not parsing pinctrl DT
- [ 0.180000] reg-dummy reg-dummy: no default pinctrl state
- [ 0.184000] device: 'regulator.0': device_add
- [ 0.188000] regulator-dummy: no parameters
- [ 0.192000] driver: 'reg-dummy': driver_bound: bound to device 'reg-dummy'
- [ 0.196000] bus: 'platform': really_probe: bound device reg-dummy to driver reg-dummy
- [ 0.204000] NET: Registered protocol family 16
- [ 0.208000] device class 'bdi': registering
- [ 0.212000] bus: 'platform': add driver jz4780-pinctrl
- [ 0.216000] device class 'gpio': registering
- [ 0.220000] device class 'backlight': registering
- [ 0.224000] device class 'tty': registering
- [ 0.228000] bus: 'i2c': registered
- [ 0.228000] bus: 'i2c': add driver dummy
- [ 0.232000] device class 'dma': registering
- [ 0.236000] device: 'cpu0': device_add
- [ 0.240000] bus: 'cpu': add device cpu0
- [ 0.244000] device: 'cpu1': device_add
- [ 0.244000] bus: 'cpu': add device cpu1
- [ 0.268000] device: 'writeback': device_add
- [ 0.272000] bus: 'workqueue': add device writeback
- [ 0.276000] device: 'default': device_add
- [ 0.280000] device class 'block': registering
- [ 0.284000] device class 'graphics': registering
- [ 0.288000] bus: 'platform': add driver jz4780-dma
- [ 0.292000] bus: 'platform': add driver reg-fixed-voltage
- [ 0.300000] device class 'misc': registering
- [ 0.304000] device class 'scsi_host': registering
- [ 0.308000] bus: 'scsi': registered
- [ 0.312000] device class 'scsi_device': registering
- [ 0.316000] SCSI subsystem initialized
- [ 0.320000] bus: 'usb': registered
- [ 0.324000] bus: 'usb': add driver usbfs
- [ 0.328000] usbcore: registered new interface driver usbfs
- [ 0.336000] bus: 'usb': add driver hub
- [ 0.336000] usbcore: registered new interface driver hub
- [ 0.344000] bus: 'usb': add driver usb
- [ 0.348000] usbcore: registered new device driver usb
- [ 0.352000] device class 'input': registering
- [ 0.356000] device class 'rtc': registering
- [ 0.360000] device class 'watchdog': registering
- [ 0.364000] bus: 'mmc': registered
- [ 0.368000] device class 'mmc_host': registering
- [ 0.372000] bus: 'sdio': registered
- [ 0.376000] device class 'leds': registering
- [ 0.380000] bus: 'platform': add driver jz47xx-nemc
- [ 0.388000] device class 'sound': registering
- [ 0.392000] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.396000] device class 'net': registering
- [ 0.400000] device: 'lo': device_add
- [ 0.404000] Switched to clocksource jz4780-tcu-clocksource
- [ 0.408000] device class 'mem': registering
- [ 0.412000] device: 'mem': device_add
- [ 0.416000] device: 'kmem': device_add
- [ 0.420000] device: 'null': device_add
- [ 0.424000] device: 'zero': device_add
- [ 0.428000] device: 'full': device_add
- [ 0.432000] device: 'random': device_add
- [ 0.436000] device: 'urandom': device_add
- [ 0.440000] device: 'kmsg': device_add
- [ 0.444000] device: 'tty': device_add
- [ 0.448000] device: 'console': device_add
- [ 0.452000] NET: Registered protocol family 2
- [ 0.456000] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.464000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.472000] TCP: Hash tables configured (established 2048 bind 2048)
- [ 0.480000] TCP: reno registered
- [ 0.480000] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.488000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.496000] NET: Registered protocol family 1
- [ 0.500000] device: 'soc': device_add
- [ 0.504000] bus: 'platform': add device soc
- [ 0.508000] device: 'soc:cpus': device_add
- [ 0.512000] bus: 'platform': add device soc:cpus
- [ 0.516000] device: 'soc:cpuintc@0': device_add
- [ 0.520000] bus: 'platform': add device soc:cpuintc@0
- [ 0.528000] device: 'soc:rtclk': device_add
- [ 0.532000] bus: 'platform': add device soc:rtclk
- [ 0.536000] device: '10000000.jz4780-cgu': device_add
- [ 0.540000] bus: 'platform': add device 10000000.jz4780-cgu
- [ 0.548000] device: 'soc:apb': device_add
- [ 0.552000] bus: 'platform': add device soc:apb
- [ 0.556000] device: '10001000.intc': device_add
- [ 0.560000] bus: 'platform': add device 10001000.intc
- [ 0.564000] device: '10002000.tcu': device_add
- [ 0.572000] bus: 'platform': add device 10002000.tcu
- [ 0.576000] device: '10002000.jz47xx-watchdog': device_add
- [ 0.580000] bus: 'platform': add device 10002000.jz47xx-watchdog
- [ 0.588000] device: '10003000.rtc': device_add
- [ 0.592000] bus: 'platform': add device 10003000.rtc
- [ 0.596000] device: '10020000.i2s': device_add
- [ 0.600000] bus: 'platform': add device 10020000.i2s
- [ 0.608000] device: '100200a4.codec': device_add
- [ 0.612000] bus: 'platform': add device 100200a4.codec
- [ 0.616000] device: '10010000.pinctrl': device_add
- [ 0.624000] bus: 'platform': add device 10010000.pinctrl
- [ 0.628000] bus: 'platform': driver_probe_device: matched device 10010000.pinctrl with driver jz4780-pinctrl
- [ 0.636000] bus: 'platform': really_probe: probing driver jz4780-pinctrl with device 10010000.pinctrl
- [ 0.648000] jz4780-pinctrl 10010000.pinctrl: no default pinctrl state
- [ 0.652000] device: 'gpiochip0': device_add
- [ 0.660000] gpiochip_add: registered GPIOs 0 to 31 on device: gpa
- [ 0.664000] device: 'gpiochip32': device_add
- [ 0.668000] gpiochip_add: registered GPIOs 32 to 63 on device: gpb
- [ 0.676000] device: 'gpiochip64': device_add
- [ 0.680000] gpiochip_add: registered GPIOs 64 to 95 on device: gpc
- [ 0.688000] device: 'gpiochip96': device_add
- [ 0.692000] gpiochip_add: registered GPIOs 96 to 127 on device: gpd
- [ 0.696000] device: 'gpiochip128': device_add
- [ 0.700000] gpiochip_add: registered GPIOs 128 to 159 on device: gpe
- [ 0.708000] device: 'gpiochip160': device_add
- [ 0.712000] gpiochip_add: registered GPIOs 160 to 191 on device: gpf
- [ 0.720000] generic pinconfig core: found bias-pull-up with value 1
- [ 0.728000] generic pinconfig core: found bias-disable with value 0
- [ 0.732000] generic pinconfig core: found bias-pull-up with value 1
- [ 0.740000] generic pinconfig core: found bias-disable with value 0
- [ 0.744000] generic pinconfig core: found bias-disable with value 0
- [ 0.752000] generic pinconfig core: found bias-disable with value 0
- [ 0.760000] generic pinconfig core: found bias-disable with value 0
- [ 0.764000] generic pinconfig core: found bias-disable with value 0
- [ 0.772000] generic pinconfig core: found bias-disable with value 0
- [ 0.776000] generic pinconfig core: found bias-disable with value 0
- [ 0.784000] generic pinconfig core: found bias-disable with value 0
- [ 0.792000] generic pinconfig core: found bias-disable with value 0
- [ 0.796000] generic pinconfig core: found bias-pull-down with value 1
- [ 0.804000] generic pinconfig core: found bias-disable with value 0
- [ 0.808000] generic pinconfig core: found bias-pull-down with value 1
- [ 0.816000] generic pinconfig core: found bias-disable with value 0
- [ 0.824000] generic pinconfig core: found bias-disable with value 0
- [ 0.828000] generic pinconfig core: found bias-disable with value 0
- [ 0.836000] generic pinconfig core: found bias-pull-up with value 1
- [ 0.840000] generic pinconfig core: found bias-disable with value 0
- [ 0.848000] generic pinconfig core: found bias-disable with value 0
- [ 0.856000] generic pinconfig core: found bias-disable with value 0
- [ 0.860000] generic pinconfig core: found bias-disable with value 0
- [ 0.868000] generic pinconfig core: found bias-disable with value 0
- [ 0.872000] generic pinconfig core: found bias-disable with value 0
- [ 0.880000] generic pinconfig core: found bias-disable with value 0
- [ 0.884000] generic pinconfig core: found bias-disable with value 0
- [ 0.892000] generic pinconfig core: found bias-disable with value 0
- [ 0.900000] generic pinconfig core: found bias-disable with value 0
- [ 0.904000] generic pinconfig core: found bias-disable with value 0
- [ 0.912000] generic pinconfig core: found bias-disable with value 0
- [ 0.916000] generic pinconfig core: found bias-disable with value 0
- [ 0.924000] generic pinconfig core: found bias-disable with value 0
- [ 0.932000] generic pinconfig core: found bias-disable with value 0
- [ 0.936000] generic pinconfig core: found bias-disable with value 0
- [ 0.944000] generic pinconfig core: found bias-disable with value 0
- [ 0.948000] generic pinconfig core: found bias-disable with value 0
- [ 0.956000] generic pinconfig core: found bias-disable with value 0
- [ 0.964000] generic pinconfig core: found bias-disable with value 0
- [ 0.968000] generic pinconfig core: found bias-disable with value 0
- [ 0.976000] generic pinconfig core: found bias-disable with value 0
- [ 0.980000] generic pinconfig core: found bias-disable with value 0
- [ 0.988000] generic pinconfig core: found bias-disable with value 0
- [ 0.992000] generic pinconfig core: found bias-disable with value 0
- [ 1.000000] generic pinconfig core: found bias-disable with value 0
- [ 1.008000] generic pinconfig core: found bias-disable with value 0
- [ 1.012000] generic pinconfig core: found bias-disable with value 0
- [ 1.020000] generic pinconfig core: found bias-disable with value 0
- [ 1.024000] generic pinconfig core: found bias-disable with value 0
- [ 1.032000] generic pinconfig core: found bias-disable with value 0
- [ 1.040000] generic pinconfig core: found bias-disable with value 0
- [ 1.044000] generic pinconfig core: found bias-disable with value 0
- [ 1.052000] generic pinconfig core: found bias-disable with value 0
- [ 1.056000] generic pinconfig core: found bias-disable with value 0
- [ 1.064000] generic pinconfig core: found bias-disable with value 0
- [ 1.072000] generic pinconfig core: found bias-disable with value 0
- [ 1.076000] generic pinconfig core: found bias-disable with value 0
- [ 1.084000] generic pinconfig core: found bias-disable with value 0
- [ 1.088000] generic pinconfig core: found bias-disable with value 0
- [ 1.096000] generic pinconfig core: found bias-disable with value 0
- [ 1.104000] generic pinconfig core: found bias-disable with value 0
- [ 1.108000] generic pinconfig core: found bias-disable with value 0
- [ 1.116000] generic pinconfig core: found bias-disable with value 0
- [ 1.120000] generic pinconfig core: found bias-disable with value 0
- [ 1.128000] generic pinconfig core: found bias-disable with value 0
- [ 1.132000] generic pinconfig core: found bias-disable with value 0
- [ 1.140000] generic pinconfig core: found bias-disable with value 0
- [ 1.148000] generic pinconfig core: found bias-disable with value 0
- [ 1.152000] generic pinconfig core: found bias-disable with value 0
- [ 1.160000] generic pinconfig core: found bias-disable with value 0
- [ 1.164000] generic pinconfig core: found bias-disable with value 0
- [ 1.172000] generic pinconfig core: found bias-disable with value 0
- [ 1.180000] generic pinconfig core: found bias-disable with value 0
- [ 1.184000] generic pinconfig core: found bias-disable with value 0
- [ 1.192000] generic pinconfig core: found bias-disable with value 0
- [ 1.196000] generic pinconfig core: found bias-disable with value 0
- [ 1.204000] generic pinconfig core: found bias-disable with value 0
- [ 1.212000] generic pinconfig core: found bias-disable with value 0
- [ 1.216000] generic pinconfig core: found bias-disable with value 0
- [ 1.224000] generic pinconfig core: found bias-disable with value 0
- [ 1.228000] generic pinconfig core: found bias-disable with value 0
- [ 1.236000] generic pinconfig core: found bias-disable with value 0
- [ 1.244000] jz4780-pinctrl 10010000.pinctrl: group 'uart0-data'
- [ 1.248000] jz4780-pinctrl 10010000.pinctrl: group 'uart0-dataplusflow'
- [ 1.256000] jz4780-pinctrl 10010000.pinctrl: group 'uart2-data'
- [ 1.260000] jz4780-pinctrl 10010000.pinctrl: group 'uart2-dataplusflow'
- [ 1.268000] jz4780-pinctrl 10010000.pinctrl: group 'uart3-data'
- [ 1.272000] jz4780-pinctrl 10010000.pinctrl: group 'uart3-dataplusflow'
- [ 1.280000] jz4780-pinctrl 10010000.pinctrl: group 'uart4-data'
- [ 1.288000] jz4780-pinctrl 10010000.pinctrl: group 'msc0-pa'
- [ 1.292000] jz4780-pinctrl 10010000.pinctrl: group 'msc0-pe'
- [ 1.296000] jz4780-pinctrl 10010000.pinctrl: group 'msc1-pd'
- [ 1.304000] jz4780-pinctrl 10010000.pinctrl: group 'msc1-pe'
- [ 1.308000] jz4780-pinctrl 10010000.pinctrl: group 'nemc-data'
- [ 1.316000] jz4780-pinctrl 10010000.pinctrl: group 'nemc-cle-ale'
- [ 1.320000] jz4780-pinctrl 10010000.pinctrl: group 'nemc-addr'
- [ 1.328000] jz4780-pinctrl 10010000.pinctrl: group 'nemc-rd-we'
- [ 1.332000] jz4780-pinctrl 10010000.pinctrl: group 'nemc-frd-fwe'
- [ 1.340000] jz4780-pinctrl 10010000.pinctrl: group 'nemc-cs1'
- [ 1.344000] jz4780-pinctrl 10010000.pinctrl: group 'i2c0-data'
- [ 1.352000] jz4780-pinctrl 10010000.pinctrl: group 'i2c1-data'
- [ 1.356000] jz4780-pinctrl 10010000.pinctrl: group 'i2c2-data'
- [ 1.364000] jz4780-pinctrl 10010000.pinctrl: group 'i2c3-data'
- [ 1.368000] jz4780-pinctrl 10010000.pinctrl: group 'i2c4-data-pe'
- [ 1.376000] jz4780-pinctrl 10010000.pinctrl: group 'i2c4-data-pf'
- [ 1.380000] jz4780-pinctrl 10010000.pinctrl: func 'uart0'
- [ 1.388000] jz4780-pinctrl 10010000.pinctrl: func 'uart2'
- [ 1.392000] jz4780-pinctrl 10010000.pinctrl: func 'uart3'
- [ 1.396000] jz4780-pinctrl 10010000.pinctrl: func 'uart4'
- [ 1.404000] jz4780-pinctrl 10010000.pinctrl: func 'msc0'
- [ 1.408000] jz4780-pinctrl 10010000.pinctrl: func 'msc1'
- [ 1.412000] jz4780-pinctrl 10010000.pinctrl: func 'nemc'
- [ 1.420000] jz4780-pinctrl 10010000.pinctrl: func 'i2c0'
- [ 1.424000] jz4780-pinctrl 10010000.pinctrl: func 'i2c1'
- [ 1.432000] jz4780-pinctrl 10010000.pinctrl: func 'i2c2'
- [ 1.436000] jz4780-pinctrl 10010000.pinctrl: func 'i2c3'
- [ 1.440000] jz4780-pinctrl 10010000.pinctrl: func 'i2c4'
- [ 1.448000] jz4780-pinctrl 10010000.pinctrl: try to register 192 pins ...
- [ 1.452000] pinctrl core: registered pin 0 (PA0) on 10010000.pinctrl
- [ 1.460000] pinctrl core: registered pin 1 (PA1) on 10010000.pinctrl
- [ 1.468000] pinctrl core: registered pin 2 (PA2) on 10010000.pinctrl
- [ 1.472000] pinctrl core: registered pin 3 (PA3) on 10010000.pinctrl
- [ 1.480000] pinctrl core: registered pin 4 (PA4) on 10010000.pinctrl
- [ 1.484000] pinctrl core: registered pin 5 (PA5) on 10010000.pinctrl
- [ 1.492000] pinctrl core: registered pin 6 (PA6) on 10010000.pinctrl
- [ 1.500000] pinctrl core: registered pin 7 (PA7) on 10010000.pinctrl
- [ 1.504000] pinctrl core: registered pin 8 (PA8) on 10010000.pinctrl
- [ 1.512000] pinctrl core: registered pin 9 (PA9) on 10010000.pinctrl
- [ 1.516000] pinctrl core: registered pin 10 (PA10) on 10010000.pinctrl
- [ 1.524000] pinctrl core: registered pin 11 (PA11) on 10010000.pinctrl
- [ 1.532000] pinctrl core: registered pin 12 (PA12) on 10010000.pinctrl
- [ 1.536000] pinctrl core: registered pin 13 (PA13) on 10010000.pinctrl
- [ 1.544000] pinctrl core: registered pin 14 (PA14) on 10010000.pinctrl
- [ 1.552000] pinctrl core: registered pin 15 (PA15) on 10010000.pinctrl
- [ 1.556000] pinctrl core: registered pin 16 (PA16) on 10010000.pinctrl
- [ 1.564000] pinctrl core: registered pin 17 (PA17) on 10010000.pinctrl
- [ 1.572000] pinctrl core: registered pin 18 (PA18) on 10010000.pinctrl
- [ 1.576000] pinctrl core: registered pin 19 (PA19) on 10010000.pinctrl
- [ 1.584000] pinctrl core: registered pin 20 (PA20) on 10010000.pinctrl
- [ 1.592000] pinctrl core: registered pin 21 (PA21) on 10010000.pinctrl
- [ 1.596000] pinctrl core: registered pin 22 (PA22) on 10010000.pinctrl
- [ 1.604000] pinctrl core: registered pin 23 (PA23) on 10010000.pinctrl
- [ 1.612000] pinctrl core: registered pin 24 (PA24) on 10010000.pinctrl
- [ 1.616000] pinctrl core: registered pin 25 (PA25) on 10010000.pinctrl
- [ 1.624000] pinctrl core: registered pin 26 (PA26) on 10010000.pinctrl
- [ 1.632000] pinctrl core: registered pin 27 (PA27) on 10010000.pinctrl
- [ 1.636000] pinctrl core: registered pin 28 (PA28) on 10010000.pinctrl
- [ 1.644000] pinctrl core: registered pin 29 (PA29) on 10010000.pinctrl
- [ 1.652000] pinctrl core: registered pin 30 (PA30) on 10010000.pinctrl
- [ 1.656000] pinctrl core: registered pin 31 (PA31) on 10010000.pinctrl
- [ 1.664000] pinctrl core: registered pin 32 (PB0) on 10010000.pinctrl
- [ 1.668000] pinctrl core: registered pin 33 (PB1) on 10010000.pinctrl
- [ 1.676000] pinctrl core: registered pin 34 (PB2) on 10010000.pinctrl
- [ 1.684000] pinctrl core: registered pin 35 (PB3) on 10010000.pinctrl
- [ 1.688000] pinctrl core: registered pin 36 (PB4) on 10010000.pinctrl
- [ 1.696000] pinctrl core: registered pin 37 (PB5) on 10010000.pinctrl
- [ 1.704000] pinctrl core: registered pin 38 (PB6) on 10010000.pinctrl
- [ 1.708000] pinctrl core: registered pin 39 (PB7) on 10010000.pinctrl
- [ 1.716000] pinctrl core: registered pin 40 (PB8) on 10010000.pinctrl
- [ 1.724000] pinctrl core: registered pin 41 (PB9) on 10010000.pinctrl
- [ 1.728000] pinctrl core: registered pin 42 (PB10) on 10010000.pinctrl
- [ 1.736000] pinctrl core: registered pin 43 (PB11) on 10010000.pinctrl
- [ 1.740000] pinctrl core: registered pin 44 (PB12) on 10010000.pinctrl
- [ 1.748000] pinctrl core: registered pin 45 (PB13) on 10010000.pinctrl
- [ 1.756000] pinctrl core: registered pin 46 (PB14) on 10010000.pinctrl
- [ 1.760000] pinctrl core: registered pin 47 (PB15) on 10010000.pinctrl
- [ 1.768000] pinctrl core: registered pin 48 (PB16) on 10010000.pinctrl
- [ 1.776000] pinctrl core: registered pin 49 (PB17) on 10010000.pinctrl
- [ 1.780000] pinctrl core: registered pin 50 (PB18) on 10010000.pinctrl
- [ 1.788000] pinctrl core: registered pin 51 (PB19) on 10010000.pinctrl
- [ 1.796000] pinctrl core: registered pin 52 (PB20) on 10010000.pinctrl
- [ 1.800000] pinctrl core: registered pin 53 (PB21) on 10010000.pinctrl
- [ 1.808000] pinctrl core: registered pin 54 (PB22) on 10010000.pinctrl
- [ 1.816000] pinctrl core: registered pin 55 (PB23) on 10010000.pinctrl
- [ 1.820000] pinctrl core: registered pin 56 (PB24) on 10010000.pinctrl
- [ 1.828000] pinctrl core: registered pin 57 (PB25) on 10010000.pinctrl
- [ 1.836000] pinctrl core: registered pin 58 (PB26) on 10010000.pinctrl
- [ 1.840000] pinctrl core: registered pin 59 (PB27) on 10010000.pinctrl
- [ 1.848000] pinctrl core: registered pin 60 (PB28) on 10010000.pinctrl
- [ 1.856000] pinctrl core: registered pin 61 (PB29) on 10010000.pinctrl
- [ 1.860000] pinctrl core: registered pin 62 (PB30) on 10010000.pinctrl
- [ 1.868000] pinctrl core: registered pin 63 (PB31) on 10010000.pinctrl
- [ 1.876000] pinctrl core: registered pin 64 (PC0) on 10010000.pinctrl
- [ 1.880000] pinctrl core: registered pin 65 (PC1) on 10010000.pinctrl
- [ 1.888000] pinctrl core: registered pin 66 (PC2) on 10010000.pinctrl
- [ 1.892000] pinctrl core: registered pin 67 (PC3) on 10010000.pinctrl
- [ 1.900000] pinctrl core: registered pin 68 (PC4) on 10010000.pinctrl
- [ 1.908000] pinctrl core: registered pin 69 (PC5) on 10010000.pinctrl
- [ 1.912000] pinctrl core: registered pin 70 (PC6) on 10010000.pinctrl
- [ 1.920000] pinctrl core: registered pin 71 (PC7) on 10010000.pinctrl
- [ 1.928000] pinctrl core: registered pin 72 (PC8) on 10010000.pinctrl
- [ 1.932000] pinctrl core: registered pin 73 (PC9) on 10010000.pinctrl
- [ 1.940000] pinctrl core: registered pin 74 (PC10) on 10010000.pinctrl
- [ 1.948000] pinctrl core: registered pin 75 (PC11) on 10010000.pinctrl
- [ 1.952000] pinctrl core: registered pin 76 (PC12) on 10010000.pinctrl
- [ 1.960000] pinctrl core: registered pin 77 (PC13) on 10010000.pinctrl
- [ 1.968000] pinctrl core: registered pin 78 (PC14) on 10010000.pinctrl
- [ 1.972000] pinctrl core: registered pin 79 (PC15) on 10010000.pinctrl
- [ 1.980000] pinctrl core: registered pin 80 (PC16) on 10010000.pinctrl
- [ 1.984000] pinctrl core: registered pin 81 (PC17) on 10010000.pinctrl
- [ 1.992000] pinctrl core: registered pin 82 (PC18) on 10010000.pinctrl
- [ 2.000000] pinctrl core: registered pin 83 (PC19) on 10010000.pinctrl
- [ 2.004000] pinctrl core: registered pin 84 (PC20) on 10010000.pinctrl
- [ 2.012000] pinctrl core: registered pin 85 (PC21) on 10010000.pinctrl
- [ 2.020000] pinctrl core: registered pin 86 (PC22) on 10010000.pinctrl
- [ 2.024000] pinctrl core: registered pin 87 (PC23) on 10010000.pinctrl
- [ 2.032000] pinctrl core: registered pin 88 (PC24) on 10010000.pinctrl
- [ 2.040000] pinctrl core: registered pin 89 (PC25) on 10010000.pinctrl
- [ 2.044000] pinctrl core: registered pin 90 (PC26) on 10010000.pinctrl
- [ 2.052000] pinctrl core: registered pin 91 (PC27) on 10010000.pinctrl
- [ 2.060000] pinctrl core: registered pin 92 (PC28) on 10010000.pinctrl
- [ 2.064000] pinctrl core: registered pin 93 (PC29) on 10010000.pinctrl
- [ 2.072000] pinctrl core: registered pin 94 (PC30) on 10010000.pinctrl
- [ 2.080000] pinctrl core: registered pin 95 (PC31) on 10010000.pinctrl
- [ 2.084000] pinctrl core: registered pin 96 (PD0) on 10010000.pinctrl
- [ 2.092000] pinctrl core: registered pin 97 (PD1) on 10010000.pinctrl
- [ 2.100000] pinctrl core: registered pin 98 (PD2) on 10010000.pinctrl
- [ 2.104000] pinctrl core: registered pin 99 (PD3) on 10010000.pinctrl
- [ 2.112000] pinctrl core: registered pin 100 (PD4) on 10010000.pinctrl
- [ 2.120000] pinctrl core: registered pin 101 (PD5) on 10010000.pinctrl
- [ 2.124000] pinctrl core: registered pin 102 (PD6) on 10010000.pinctrl
- [ 2.132000] pinctrl core: registered pin 103 (PD7) on 10010000.pinctrl
- [ 2.136000] pinctrl core: registered pin 104 (PD8) on 10010000.pinctrl
- [ 2.144000] pinctrl core: registered pin 105 (PD9) on 10010000.pinctrl
- [ 2.152000] pinctrl core: registered pin 106 (PD10) on 10010000.pinctrl
- [ 2.156000] pinctrl core: registered pin 107 (PD11) on 10010000.pinctrl
- [ 2.164000] pinctrl core: registered pin 108 (PD12) on 10010000.pinctrl
- [ 2.172000] pinctrl core: registered pin 109 (PD13) on 10010000.pinctrl
- [ 2.180000] pinctrl core: registered pin 110 (PD14) on 10010000.pinctrl
- [ 2.184000] pinctrl core: registered pin 111 (PD15) on 10010000.pinctrl
- [ 2.192000] pinctrl core: registered pin 112 (PD16) on 10010000.pinctrl
- [ 2.200000] pinctrl core: registered pin 113 (PD17) on 10010000.pinctrl
- [ 2.204000] pinctrl core: registered pin 114 (PD18) on 10010000.pinctrl
- [ 2.212000] pinctrl core: registered pin 115 (PD19) on 10010000.pinctrl
- [ 2.220000] pinctrl core: registered pin 116 (PD20) on 10010000.pinctrl
- [ 2.224000] pinctrl core: registered pin 117 (PD21) on 10010000.pinctrl
- [ 2.232000] pinctrl core: registered pin 118 (PD22) on 10010000.pinctrl
- [ 2.240000] pinctrl core: registered pin 119 (PD23) on 10010000.pinctrl
- [ 2.244000] pinctrl core: registered pin 120 (PD24) on 10010000.pinctrl
- [ 2.252000] pinctrl core: registered pin 121 (PD25) on 10010000.pinctrl
- [ 2.260000] pinctrl core: registered pin 122 (PD26) on 10010000.pinctrl
- [ 2.264000] pinctrl core: registered pin 123 (PD27) on 10010000.pinctrl
- [ 2.272000] pinctrl core: registered pin 124 (PD28) on 10010000.pinctrl
- [ 2.280000] pinctrl core: registered pin 125 (PD29) on 10010000.pinctrl
- [ 2.284000] pinctrl core: registered pin 126 (PD30) on 10010000.pinctrl
- [ 2.292000] pinctrl core: registered pin 127 (PD31) on 10010000.pinctrl
- [ 2.300000] pinctrl core: registered pin 128 (PE0) on 10010000.pinctrl
- [ 2.304000] pinctrl core: registered pin 129 (PE1) on 10010000.pinctrl
- [ 2.312000] pinctrl core: registered pin 130 (PE2) on 10010000.pinctrl
- [ 2.320000] pinctrl core: registered pin 131 (PE3) on 10010000.pinctrl
- [ 2.324000] pinctrl core: registered pin 132 (PE4) on 10010000.pinctrl
- [ 2.332000] pinctrl core: registered pin 133 (PE5) on 10010000.pinctrl
- [ 2.340000] pinctrl core: registered pin 134 (PE6) on 10010000.pinctrl
- [ 2.344000] pinctrl core: registered pin 135 (PE7) on 10010000.pinctrl
- [ 2.352000] pinctrl core: registered pin 136 (PE8) on 10010000.pinctrl
- [ 2.360000] pinctrl core: registered pin 137 (PE9) on 10010000.pinctrl
- [ 2.364000] pinctrl core: registered pin 138 (PE10) on 10010000.pinctrl
- [ 2.372000] pinctrl core: registered pin 139 (PE11) on 10010000.pinctrl
- [ 2.380000] pinctrl core: registered pin 140 (PE12) on 10010000.pinctrl
- [ 2.384000] pinctrl core: registered pin 141 (PE13) on 10010000.pinctrl
- [ 2.392000] pinctrl core: registered pin 142 (PE14) on 10010000.pinctrl
- [ 2.400000] pinctrl core: registered pin 143 (PE15) on 10010000.pinctrl
- [ 2.404000] pinctrl core: registered pin 144 (PE16) on 10010000.pinctrl
- [ 2.412000] pinctrl core: registered pin 145 (PE17) on 10010000.pinctrl
- [ 2.420000] pinctrl core: registered pin 146 (PE18) on 10010000.pinctrl
- [ 2.424000] pinctrl core: registered pin 147 (PE19) on 10010000.pinctrl
- [ 2.432000] pinctrl core: registered pin 148 (PE20) on 10010000.pinctrl
- [ 2.440000] pinctrl core: registered pin 149 (PE21) on 10010000.pinctrl
- [ 2.444000] pinctrl core: registered pin 150 (PE22) on 10010000.pinctrl
- [ 2.452000] pinctrl core: registered pin 151 (PE23) on 10010000.pinctrl
- [ 2.460000] pinctrl core: registered pin 152 (PE24) on 10010000.pinctrl
- [ 2.464000] pinctrl core: registered pin 153 (PE25) on 10010000.pinctrl
- [ 2.472000] pinctrl core: registered pin 154 (PE26) on 10010000.pinctrl
- [ 2.480000] pinctrl core: registered pin 155 (PE27) on 10010000.pinctrl
- [ 2.484000] pinctrl core: registered pin 156 (PE28) on 10010000.pinctrl
- [ 2.492000] pinctrl core: registered pin 157 (PE29) on 10010000.pinctrl
- [ 2.500000] pinctrl core: registered pin 158 (PE30) on 10010000.pinctrl
- [ 2.504000] pinctrl core: registered pin 159 (PE31) on 10010000.pinctrl
- [ 2.512000] pinctrl core: registered pin 160 (PF0) on 10010000.pinctrl
- [ 2.520000] pinctrl core: registered pin 161 (PF1) on 10010000.pinctrl
- [ 2.524000] pinctrl core: registered pin 162 (PF2) on 10010000.pinctrl
- [ 2.532000] pinctrl core: registered pin 163 (PF3) on 10010000.pinctrl
- [ 2.540000] pinctrl core: registered pin 164 (PF4) on 10010000.pinctrl
- [ 2.544000] pinctrl core: registered pin 165 (PF5) on 10010000.pinctrl
- [ 2.552000] pinctrl core: registered pin 166 (PF6) on 10010000.pinctrl
- [ 2.560000] pinctrl core: registered pin 167 (PF7) on 10010000.pinctrl
- [ 2.564000] pinctrl core: registered pin 168 (PF8) on 10010000.pinctrl
- [ 2.572000] pinctrl core: registered pin 169 (PF9) on 10010000.pinctrl
- [ 2.580000] pinctrl core: registered pin 170 (PF10) on 10010000.pinctrl
- [ 2.584000] pinctrl core: registered pin 171 (PF11) on 10010000.pinctrl
- [ 2.592000] pinctrl core: registered pin 172 (PF12) on 10010000.pinctrl
- [ 2.600000] pinctrl core: registered pin 173 (PF13) on 10010000.pinctrl
- [ 2.604000] pinctrl core: registered pin 174 (PF14) on 10010000.pinctrl
- [ 2.612000] pinctrl core: registered pin 175 (PF15) on 10010000.pinctrl
- [ 2.620000] pinctrl core: registered pin 176 (PF16) on 10010000.pinctrl
- [ 2.624000] pinctrl core: registered pin 177 (PF17) on 10010000.pinctrl
- [ 2.632000] pinctrl core: registered pin 178 (PF18) on 10010000.pinctrl
- [ 2.640000] pinctrl core: registered pin 179 (PF19) on 10010000.pinctrl
- [ 2.644000] pinctrl core: registered pin 180 (PF20) on 10010000.pinctrl
- [ 2.652000] pinctrl core: registered pin 181 (PF21) on 10010000.pinctrl
- [ 2.660000] pinctrl core: registered pin 182 (PF22) on 10010000.pinctrl
- [ 2.668000] pinctrl core: registered pin 183 (PF23) on 10010000.pinctrl
- [ 2.672000] pinctrl core: registered pin 184 (PF24) on 10010000.pinctrl
- [ 2.680000] pinctrl core: registered pin 185 (PF25) on 10010000.pinctrl
- [ 2.688000] pinctrl core: registered pin 186 (PF26) on 10010000.pinctrl
- [ 2.692000] pinctrl core: registered pin 187 (PF27) on 10010000.pinctrl
- [ 2.700000] pinctrl core: registered pin 188 (PF28) on 10010000.pinctrl
- [ 2.708000] pinctrl core: registered pin 189 (PF29) on 10010000.pinctrl
- [ 2.712000] pinctrl core: registered pin 190 (PF30) on 10010000.pinctrl
- [ 2.720000] pinctrl core: registered pin 191 (PF31) on 10010000.pinctrl
- [ 2.728000] jz4780-pinctrl 10010000.pinctrl: failed to lookup the default state
- [ 2.732000] jz4780-pinctrl 10010000.pinctrl: failed to lookup the sleep state
- [ 2.740000] driver: 'jz4780-pinctrl': driver_bound: bound to device '10010000.pinctrl'
- [ 2.748000] bus: 'platform': really_probe: bound device 10010000.pinctrl to driver jz4780-pinctrl
- [ 2.760000] device: '10030000.serial': device_add
- [ 2.764000] bus: 'platform': add device 10030000.serial
- [ 2.768000] device: '10031000.serial': device_add
- [ 2.772000] bus: 'platform': add device 10031000.serial
- [ 2.780000] device: '10032000.serial': device_add
- [ 2.784000] bus: 'platform': add device 10032000.serial
- [ 2.788000] device: '10033000.serial': device_add
- [ 2.796000] bus: 'platform': add device 10033000.serial
- [ 2.800000] device: '10034000.serial': device_add
- [ 2.804000] bus: 'platform': add device 10034000.serial
- [ 2.812000] device: '10050000.i2c0': device_add
- [ 2.816000] bus: 'platform': add device 10050000.i2c0
- [ 2.820000] device: '10051000.i2c1': device_add
- [ 2.824000] bus: 'platform': add device 10051000.i2c1
- [ 2.832000] device: '10052000.i2c2': device_add
- [ 2.836000] bus: 'platform': add device 10052000.i2c2
- [ 2.840000] device: '10053000.i2c3': device_add
- [ 2.844000] bus: 'platform': add device 10053000.i2c3
- [ 2.852000] device: '13050000.jz4780-lcdk': device_add
- [ 2.856000] bus: 'platform': add device 13050000.jz4780-lcdk
- [ 2.860000] device: '10180000.jz4780-hdmi3': device_add
- [ 2.868000] bus: 'platform': add device 10180000.jz4780-hdmi3
- [ 2.872000] device: '10054000.i2c4': device_add
- [ 2.876000] bus: 'platform': add device 10054000.i2c4
- [ 2.884000] device: '10070000.adc': device_add
- [ 2.888000] bus: 'platform': add device 10070000.adc
- [ 2.892000] device: 'soc:ahb2': device_add
- [ 2.896000] bus: 'platform': add device soc:ahb2
- [ 2.904000] device: '13410000.nemc': device_add
- [ 2.908000] bus: 'platform': add device 13410000.nemc
- [ 2.912000] bus: 'platform': driver_probe_device: matched device 13410000.nemc with driver jz47xx-nemc
- [ 2.920000] bus: 'platform': really_probe: probing driver jz47xx-nemc with device 13410000.nemc
- [ 2.932000] pinctrl core: add 9 pinmux maps
- [ 2.936000] pinctrl core: add 3 pinmux maps
- [ 2.940000] pinctrl core: add 3 pinmux maps
- [ 2.944000] jz4780-pinctrl 10010000.pinctrl: found group selector 11 for nemc-data
- [ 2.952000] jz4780-pinctrl 10010000.pinctrl: found group selector 12 for nemc-cle-ale
- [ 2.960000] jz4780-pinctrl 10010000.pinctrl: found group selector 15 for nemc-frd-fwe
- [ 2.968000] jz4780-pinctrl 10010000.pinctrl: request pin 0 (PA0) for 13410000.nemc
- [ 2.976000] jz4780-pinctrl 10010000.pinctrl: request pin 1 (PA1) for 13410000.nemc
- [ 2.984000] jz4780-pinctrl 10010000.pinctrl: request pin 2 (PA2) for 13410000.nemc
- [ 2.988000] jz4780-pinctrl 10010000.pinctrl: request pin 3 (PA3) for 13410000.nemc
- [ 2.996000] jz4780-pinctrl 10010000.pinctrl: request pin 4 (PA4) for 13410000.nemc
- [ 3.004000] jz4780-pinctrl 10010000.pinctrl: request pin 5 (PA5) for 13410000.nemc
- [ 3.012000] jz4780-pinctrl 10010000.pinctrl: request pin 6 (PA6) for 13410000.nemc
- [ 3.020000] jz4780-pinctrl 10010000.pinctrl: request pin 7 (PA7) for 13410000.nemc
- [ 3.028000] jz4780-pinctrl 10010000.pinctrl: set pin PA0 to function 0
- [ 3.036000] jz4780-pinctrl 10010000.pinctrl: set pin PA1 to function 0
- [ 3.040000] jz4780-pinctrl 10010000.pinctrl: set pin PA2 to function 0
- [ 3.048000] jz4780-pinctrl 10010000.pinctrl: set pin PA3 to function 0
- [ 3.056000] jz4780-pinctrl 10010000.pinctrl: set pin PA4 to function 0
- [ 3.060000] jz4780-pinctrl 10010000.pinctrl: set pin PA5 to function 0
- [ 3.068000] jz4780-pinctrl 10010000.pinctrl: set pin PA6 to function 0
- [ 3.076000] jz4780-pinctrl 10010000.pinctrl: set pin PA7 to function 0
- [ 3.080000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 0 0
- [ 3.088000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 1 0
- [ 3.092000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 2 0
- [ 3.100000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 3 0
- [ 3.108000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 4 0
- [ 3.112000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 5 0
- [ 3.120000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 6 0
- [ 3.124000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 7 0
- [ 3.132000] jz4780-pinctrl 10010000.pinctrl: request pin 32 (PB0) for 13410000.nemc
- [ 3.140000] jz4780-pinctrl 10010000.pinctrl: request pin 33 (PB1) for 13410000.nemc
- [ 3.148000] jz4780-pinctrl 10010000.pinctrl: set pin PB0 to function 0
- [ 3.156000] jz4780-pinctrl 10010000.pinctrl: set pin PB1 to function 0
- [ 3.160000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 32 0
- [ 3.168000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 33 0
- [ 3.172000] jz4780-pinctrl 10010000.pinctrl: request pin 18 (PA18) for 13410000.nemc
- [ 3.180000] jz4780-pinctrl 10010000.pinctrl: request pin 19 (PA19) for 13410000.nemc
- [ 3.188000] jz4780-pinctrl 10010000.pinctrl: set pin PA18 to function 0
- [ 3.196000] jz4780-pinctrl 10010000.pinctrl: set pin PA19 to function 0
- [ 3.204000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 18 0
- [ 3.208000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 19 0
- [ 3.216000] device: '1b000000.nand': device_add
- [ 3.220000] bus: 'platform': add device 1b000000.nand
- [ 3.228000] device: '16000000.dm9000': device_add
- [ 3.232000] bus: 'platform': add device 16000000.dm9000
- [ 3.236000] jz47xx-nemc 13410000.nemc: JZ4780 NEMC initialised
- [ 3.244000] driver: 'jz47xx-nemc': driver_bound: bound to device '13410000.nemc'
- [ 3.248000] bus: 'platform': really_probe: bound device 13410000.nemc to driver jz47xx-nemc
- [ 3.260000] device: '134100d0.efuse': device_add
- [ 3.264000] bus: 'platform': add device 134100d0.efuse
- [ 3.268000] device: '13420000.dma': device_add
- [ 3.272000] bus: 'platform': add device 13420000.dma
- [ 3.280000] bus: 'platform': driver_probe_device: matched device 13420000.dma with driver jz4780-dma
- [ 3.288000] bus: 'platform': really_probe: probing driver jz4780-dma with device 13420000.dma
- [ 3.296000] jz4780-dma 13420000.dma: no default pinctrl state
- [ 3.304000] device: 'dma0chan0': device_add
- [ 3.308000] device: 'dma0chan1': device_add
- [ 3.312000] device: 'dma0chan2': device_add
- [ 3.316000] device: 'dma0chan3': device_add
- [ 3.320000] device: 'dma0chan4': device_add
- [ 3.324000] device: 'dma0chan5': device_add
- [ 3.328000] device: 'dma0chan6': device_add
- [ 3.332000] device: 'dma0chan7': device_add
- [ 3.336000] device: 'dma0chan8': device_add
- [ 3.340000] device: 'dma0chan9': device_add
- [ 3.348000] device: 'dma0chan10': device_add
- [ 3.352000] device: 'dma0chan11': device_add
- [ 3.356000] device: 'dma0chan12': device_add
- [ 3.360000] device: 'dma0chan13': device_add
- [ 3.364000] device: 'dma0chan14': device_add
- [ 3.368000] device: 'dma0chan15': device_add
- [ 3.372000] device: 'dma0chan16': device_add
- [ 3.376000] device: 'dma0chan17': device_add
- [ 3.384000] device: 'dma0chan18': device_add
- [ 3.388000] device: 'dma0chan19': device_add
- [ 3.392000] device: 'dma0chan20': device_add
- [ 3.396000] device: 'dma0chan21': device_add
- [ 3.400000] device: 'dma0chan22': device_add
- [ 3.404000] device: 'dma0chan23': device_add
- [ 3.408000] device: 'dma0chan24': device_add
- [ 3.412000] device: 'dma0chan25': device_add
- [ 3.420000] device: 'dma0chan26': device_add
- [ 3.424000] device: 'dma0chan27': device_add
- [ 3.428000] device: 'dma0chan28': device_add
- [ 3.432000] device: 'dma0chan29': device_add
- [ 3.436000] device: 'dma0chan30': device_add
- [ 3.440000] device: 'dma0chan31': device_add
- [ 3.444000] jz4780-dma 13420000.dma: JZ4780 DMA controller initialised
- [ 3.452000] driver: 'jz4780-dma': driver_bound: bound to device '13420000.dma'
- [ 3.460000] bus: 'platform': really_probe: bound device 13420000.dma to driver jz4780-dma
- [ 3.468000] device: '13450000.msc': device_add
- [ 3.472000] bus: 'platform': add device 13450000.msc
- [ 3.476000] device: '13460000.msc': device_add
- [ 3.480000] bus: 'platform': add device 13460000.msc
- [ 3.488000] device: '13490000.jz4780-ehci': device_add
- [ 3.492000] bus: 'platform': add device 13490000.jz4780-ehci
- [ 3.500000] device: '134a0000.jz4780-ohci': device_add
- [ 3.504000] bus: 'platform': add device 134a0000.jz4780-ohci
- [ 3.508000] device: '134d0000.bch': device_add
- [ 3.516000] bus: 'platform': add device 134d0000.bch
- [ 3.520000] device: '13500000.jz4780-otg': device_add
- [ 3.524000] bus: 'platform': add device 13500000.jz4780-otg
- [ 3.532000] device: 'board': device_add
- [ 3.536000] bus: 'platform': add device board
- [ 3.540000] device: 'board:audio-ci20': device_add
- [ 3.544000] bus: 'platform': add device board:audio-ci20
- [ 3.548000] device: 'board:ir-receiver': device_add
- [ 3.556000] bus: 'platform': add device board:ir-receiver
- [ 3.560000] device: 'board:fixedregulator@0': device_add
- [ 3.564000] bus: 'platform': add device board:fixedregulator@0
- [ 3.572000] bus: 'platform': driver_probe_device: matched device board:fixedregulator@0 with driver reg-fixed-voltage
- [ 3.584000] bus: 'platform': really_probe: probing driver reg-fixed-voltage with device board:fixedregulator@0
- [ 3.592000] reg-fixed-voltage board:fixedregulator@0: no default pinctrl state
- [ 3.600000] of_get_named_gpiod_flags: parsed 'gpio' property of node '/board/fixedregulator@0[0]' - status (0)
- [ 3.612000] device: 'regulator.1': device_add
- [ 3.616000] eth0_power: no parameters
- [ 3.620000] driver: 'reg-fixed-voltage': driver_bound: bound to device 'board:fixedregulator@0'
- [ 3.628000] bus: 'platform': really_probe: bound device board:fixedregulator@0 to driver reg-fixed-voltage
- [ 3.636000] device: 'board:fixedregulator@1': device_add
- [ 3.644000] bus: 'platform': add device board:fixedregulator@1
- [ 3.648000] bus: 'platform': driver_probe_device: matched device board:fixedregulator@1 with driver reg-fixed-voltage
- [ 3.660000] bus: 'platform': really_probe: probing driver reg-fixed-voltage with device board:fixedregulator@1
- [ 3.668000] reg-fixed-voltage board:fixedregulator@1: no default pinctrl state
- [ 3.676000] of_get_named_gpiod_flags: parsed 'gpio' property of node '/board/fixedregulator@1[0]' - status (0)
- [ 3.688000] device: 'regulator.2': device_add
- [ 3.692000] hdmi_power: no parameters
- [ 3.696000] driver: 'reg-fixed-voltage': driver_bound: bound to device 'board:fixedregulator@1'
- [ 3.704000] bus: 'platform': really_probe: bound device board:fixedregulator@1 to driver reg-fixed-voltage
- [ 3.716000] device: 'board:fixedregulator@2': device_add
- [ 3.720000] bus: 'platform': add device board:fixedregulator@2
- [ 3.728000] bus: 'platform': driver_probe_device: matched device board:fixedregulator@2 with driver reg-fixed-voltage
- [ 3.736000] bus: 'platform': really_probe: probing driver reg-fixed-voltage with device board:fixedregulator@2
- [ 3.748000] reg-fixed-voltage board:fixedregulator@2: no default pinctrl state
- [ 3.756000] of_get_named_gpiod_flags: parsed 'gpio' property of node '/board/fixedregulator@2[0]' - status (0)
- [ 3.764000] device: 'regulator.3': device_add
- [ 3.768000] wifi_power_gpio: 3300 mV
- [ 3.772000] driver: 'reg-fixed-voltage': driver_bound: bound to device 'board:fixedregulator@2'
- [ 3.784000] bus: 'platform': really_probe: bound device board:fixedregulator@2 to driver reg-fixed-voltage
- [ 3.792000] device: 'board:fixedregulator@3': device_add
- [ 3.796000] bus: 'platform': add device board:fixedregulator@3
- [ 3.804000] bus: 'platform': driver_probe_device: matched device board:fixedregulator@3 with driver reg-fixed-voltage
- [ 3.816000] bus: 'platform': really_probe: probing driver reg-fixed-voltage with device board:fixedregulator@3
- [ 3.824000] reg-fixed-voltage board:fixedregulator@3: no default pinctrl state
- [ 3.832000] of_get_named_gpiod_flags: parsed 'gpio' property of node '/board/fixedregulator@3[0]' - status (0)
- [ 3.844000] device: 'regulator.4': device_add
- [ 3.848000] wifi_reset_gpio: no parameters
- [ 3.852000] driver: 'reg-fixed-voltage': driver_bound: bound to device 'board:fixedregulator@3'
- [ 3.860000] bus: 'platform': really_probe: bound device board:fixedregulator@3 to driver reg-fixed-voltage
- [ 3.868000] device: 'board:fixedregulator@4': device_add
- [ 3.876000] bus: 'platform': add device board:fixedregulator@4
- [ 3.880000] bus: 'platform': driver_probe_device: matched device board:fixedregulator@4 with driver reg-fixed-voltage
- [ 3.892000] bus: 'platform': really_probe: probing driver reg-fixed-voltage with device board:fixedregulator@4
- [ 3.904000] reg-fixed-voltage board:fixedregulator@4: no default pinctrl state
- [ 3.908000] of_get_named_gpiod_flags: parsed 'gpio' property of node '/board/fixedregulator@4[0]' - status (0)
- [ 3.920000] device: 'regulator.5': device_add
- [ 3.924000] bt_reset_gpio: no parameters
- [ 3.928000] driver: 'reg-fixed-voltage': driver_bound: bound to device 'board:fixedregulator@4'
- [ 3.936000] bus: 'platform': really_probe: bound device board:fixedregulator@4 to driver reg-fixed-voltage
- [ 3.948000] device: 'board:fixedregulator@5': device_add
- [ 3.952000] bus: 'platform': add device board:fixedregulator@5
- [ 3.960000] bus: 'platform': driver_probe_device: matched device board:fixedregulator@5 with driver reg-fixed-voltage
- [ 3.968000] bus: 'platform': really_probe: probing driver reg-fixed-voltage with device board:fixedregulator@5
- [ 3.980000] reg-fixed-voltage board:fixedregulator@5: no default pinctrl state
- [ 3.988000] of_get_named_gpiod_flags: parsed 'gpio' property of node '/board/fixedregulator@5[0]' - status (0)
- [ 3.996000] device: 'regulator.6': device_add
- [ 4.000000] bt_reg_on_gpio: no parameters
- [ 4.008000] driver: 'reg-fixed-voltage': driver_bound: bound to device 'board:fixedregulator@5'
- [ 4.016000] bus: 'platform': really_probe: bound device board:fixedregulator@5 to driver reg-fixed-voltage
- [ 4.024000] device: 'board:fixedregulator@6': device_add
- [ 4.032000] bus: 'platform': add device board:fixedregulator@6
- [ 4.036000] bus: 'platform': driver_probe_device: matched device board:fixedregulator@6 with driver reg-fixed-voltage
- [ 4.048000] bus: 'platform': really_probe: probing driver reg-fixed-voltage with device board:fixedregulator@6
- [ 4.056000] reg-fixed-voltage board:fixedregulator@6: no default pinctrl state
- [ 4.064000] of_get_named_gpiod_flags: parsed 'gpio' property of node '/board/fixedregulator@6[0]' - status (0)
- [ 4.076000] device: 'regulator.7': device_add
- [ 4.080000] bt_wake_gpio: no parameters
- [ 4.084000] driver: 'reg-fixed-voltage': driver_bound: bound to device 'board:fixedregulator@6'
- [ 4.092000] bus: 'platform': really_probe: bound device board:fixedregulator@6 to driver reg-fixed-voltage
- [ 4.104000] bus: 'clocksource': registered
- [ 4.108000] device: 'clocksource': device_add
- [ 4.112000] device: 'clocksource0': device_add
- [ 4.116000] bus: 'clocksource': add device clocksource0
- [ 4.120000] bus: 'platform': add driver alarmtimer
- [ 4.128000] Registering platform device 'alarmtimer'. Parent at platform
- [ 4.132000] device: 'alarmtimer': device_add
- [ 4.136000] bus: 'platform': add device alarmtimer
- [ 4.144000] bus: 'platform': driver_probe_device: matched device alarmtimer with driver alarmtimer
- [ 4.152000] bus: 'platform': really_probe: probing driver alarmtimer with device alarmtimer
- [ 4.160000] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
- [ 4.168000] alarmtimer alarmtimer: no default pinctrl state
- [ 4.172000] driver: 'alarmtimer': driver_bound: bound to device 'alarmtimer'
- [ 4.180000] bus: 'platform': really_probe: bound device alarmtimer to driver alarmtimer
- [ 4.188000] bus: 'clockevents': registered
- [ 4.192000] device: 'clockevents': device_add
- [ 4.196000] device: 'clockevent0': device_add
- [ 4.200000] bus: 'clockevents': add device clockevent0
- [ 4.208000] device: 'clockevent1': device_add
- [ 4.212000] bus: 'clockevents': add device clockevent1
- [ 4.216000] device: 'broadcast': device_add
- [ 4.220000] bus: 'clockevents': add device broadcast
- [ 4.224000] futex hash table entries: 512 (order: 3, 32768 bytes)
- [ 4.236000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 4.244000] msgmni has been set to 463
- [ 4.248000] io scheduler noop registered
- [ 4.252000] io scheduler deadline registered
- [ 4.260000] io scheduler cfq registered (default)
- [ 4.264000] bus: 'i2c': add driver act8600
- [ 4.268000] device: 'ptmx': device_add
- [ 4.272000] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
- [ 4.280000] Registering platform device 'serial8250'. Parent at platform
- [ 4.284000] device: 'serial8250': device_add
- [ 4.288000] bus: 'platform': add device serial8250
- [ 4.296000] device: 'ttyS0': device_add
- [ 4.300000] device: 'ttyS1': device_add
- [ 4.304000] device: 'ttyS2': device_add
- [ 4.308000] device: 'ttyS3': device_add
- [ 4.312000] device: 'ttyS4': device_add
- [ 4.316000] bus: 'platform': add driver serial8250
- [ 4.320000] bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250
- [ 4.328000] bus: 'platform': really_probe: probing driver serial8250 with device serial8250
- [ 4.336000] serial8250 serial8250: no of_node; not parsing pinctrl DT
- [ 4.344000] serial8250 serial8250: no default pinctrl state
- [ 4.348000] driver: 'serial8250': driver_bound: bound to device 'serial8250'
- [ 4.356000] bus: 'platform': really_probe: bound device serial8250 to driver serial8250
- [ 4.364000] bus: 'platform': add driver of_serial
- [ 4.372000] bus: 'platform': driver_probe_device: matched device 10030000.serial with driver of_serial
- [ 4.380000] bus: 'platform': really_probe: probing driver of_serial with device 10030000.serial
- [ 4.388000] pinctrl core: add 3 pinmux maps
- [ 4.392000] jz4780-pinctrl 10010000.pinctrl: found group selector 0 for uart0-data
- [ 4.400000] jz4780-pinctrl 10010000.pinctrl: request pin 160 (PF0) for 10030000.serial
- [ 4.408000] jz4780-pinctrl 10010000.pinctrl: request pin 163 (PF3) for 10030000.serial
- [ 4.416000] jz4780-pinctrl 10010000.pinctrl: set pin PF0 to function 0
- [ 4.424000] jz4780-pinctrl 10010000.pinctrl: set pin PF3 to function 0
- [ 4.432000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 160 3
- [ 4.436000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 163 0
- [ 4.444000] device: 'ttyS0': device_unregister
- [ 4.448000] console [ttyS0] disabled
- [ 4.452000] of_serial 10030000.serial: ttyS0 at MMIO 0x10030000 (irq = 210, base_baud = 3000000) is a Ingenic JZ UART
- [ 4.464000] console [ttyS0] enabled
- [ 4.464000] console [ttyS0] enabled
- [ 4.468000] bootconsole [early0] disabled
- [ 4.468000] bootconsole [early0] disabled
- [ 4.476000] device: 'ttyS0': device_add
- [ 4.480000] driver: 'of_serial': driver_bound: bound to device '10030000.serial'
- [ 4.488000] bus: 'platform': really_probe: bound device 10030000.serial to driver of_serial
- [ 4.496000] bus: 'platform': driver_probe_device: matched device 10031000.serial with driver of_serial
- [ 4.508000] bus: 'platform': really_probe: probing driver of_serial with device 10031000.serial
- [ 4.516000] of_serial 10031000.serial: no default pinctrl state
- [ 4.520000] device: 'ttyS1': device_unregister
- [ 4.528000] of_serial 10031000.serial: ttyS1 at MMIO 0x10031000 (irq = 211, base_baud = 3000000) is a Ingenic JZ UART
- [ 4.536000] device: 'ttyS1': device_add
- [ 4.540000] driver: 'of_serial': driver_bound: bound to device '10031000.serial'
- [ 4.548000] bus: 'platform': really_probe: bound device 10031000.serial to driver of_serial
- [ 4.556000] bus: 'platform': driver_probe_device: matched device 10032000.serial with driver of_serial
- [ 4.568000] bus: 'platform': really_probe: probing driver of_serial with device 10032000.serial
- [ 4.576000] pinctrl core: add 5 pinmux maps
- [ 4.580000] jz4780-pinctrl 10010000.pinctrl: found group selector 3 for uart2-dataplusflow
- [ 4.588000] jz4780-pinctrl 10010000.pinctrl: request pin 102 (PD6) for 10032000.serial
- [ 4.596000] jz4780-pinctrl 10010000.pinctrl: request pin 101 (PD5) for 10032000.serial
- [ 4.604000] jz4780-pinctrl 10010000.pinctrl: request pin 100 (PD4) for 10032000.serial
- [ 4.612000] jz4780-pinctrl 10010000.pinctrl: request pin 103 (PD7) for 10032000.serial
- [ 4.620000] jz4780-pinctrl 10010000.pinctrl: set pin PD6 to function 1
- [ 4.628000] jz4780-pinctrl 10010000.pinctrl: set pin PD5 to function 1
- [ 4.632000] jz4780-pinctrl 10010000.pinctrl: set pin PD4 to function 1
- [ 4.640000] jz4780-pinctrl 10010000.pinctrl: set pin PD7 to function 1
- [ 4.648000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 102 0
- [ 4.652000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 101 0
- [ 4.660000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 100 0
- [ 4.664000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 103 0
- [ 4.672000] device: 'ttyS2': device_unregister
- [ 4.676000] of_serial 10032000.serial: ttyS2 at MMIO 0x10032000 (irq = 212, base_baud = 3000000) is a Ingenic JZ UART
- [ 4.688000] device: 'ttyS2': device_add
- [ 4.692000] driver: 'of_serial': driver_bound: bound to device '10032000.serial'
- [ 4.700000] bus: 'platform': really_probe: bound device 10032000.serial to driver of_serial
- [ 4.708000] bus: 'platform': driver_probe_device: matched device 10033000.serial with driver of_serial
- [ 4.716000] bus: 'platform': really_probe: probing driver of_serial with device 10033000.serial
- [ 4.728000] pinctrl core: add 3 pinmux maps
- [ 4.732000] jz4780-pinctrl 10010000.pinctrl: found group selector 4 for uart3-data
- [ 4.740000] jz4780-pinctrl 10010000.pinctrl: request pin 108 (PD12) for 10033000.serial
- [ 4.748000] jz4780-pinctrl 10010000.pinctrl: request pin 133 (PE5) for 10033000.serial
- [ 4.756000] jz4780-pinctrl 10010000.pinctrl: set pin PD12 to function 0
- [ 4.760000] jz4780-pinctrl 10010000.pinctrl: set pin PE5 to function 1
- [ 4.768000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 108 4
- [ 4.776000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 133 0
- [ 4.780000] device: 'ttyS3': device_unregister
- [ 4.784000] of_serial 10033000.serial: ttyS3 at MMIO 0x10033000 (irq = 213, base_baud = 3000000) is a Ingenic JZ UART
- [ 4.796000] device: 'ttyS3': device_add
- [ 4.800000] driver: 'of_serial': driver_bound: bound to device '10033000.serial'
- [ 4.808000] bus: 'platform': really_probe: bound device 10033000.serial to driver of_serial
- [ 4.816000] bus: 'platform': driver_probe_device: matched device 10034000.serial with driver of_serial
- [ 4.824000] bus: 'platform': really_probe: probing driver of_serial with device 10034000.serial
- [ 4.836000] pinctrl core: add 3 pinmux maps
- [ 4.840000] jz4780-pinctrl 10010000.pinctrl: found group selector 6 for uart4-data
- [ 4.848000] jz4780-pinctrl 10010000.pinctrl: request pin 84 (PC20) for 10034000.serial
- [ 4.856000] jz4780-pinctrl 10010000.pinctrl: request pin 74 (PC10) for 10034000.serial
- [ 4.864000] jz4780-pinctrl 10010000.pinctrl: set pin PC20 to function 2
- [ 4.868000] jz4780-pinctrl 10010000.pinctrl: set pin PC10 to function 2
- [ 4.876000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 84 3
- [ 4.884000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 74 0
- [ 4.888000] device: 'ttyS4': device_unregister
- [ 4.892000] of_serial 10034000.serial: ttyS4 at MMIO 0x10034000 (irq = 214, base_baud = 3000000) is a Ingenic JZ UART
- [ 4.904000] device: 'ttyS4': device_add
- [ 4.908000] driver: 'of_serial': driver_bound: bound to device '10034000.serial'
- [ 4.916000] bus: 'platform': really_probe: bound device 10034000.serial to driver of_serial
- [ 4.924000] device class 'drm': registering
- [ 4.928000] [drm] Initialized drm 1.1.0 20060810
- [ 4.932000] bus: 'i2c': add driver ch7006
- [ 4.936000] bus: 'i2c': add driver sil164
- [ 4.944000] bus: 'platform': add driver dwc-hdmi
- [ 4.948000] bus: 'platform': driver_probe_device: matched device 10180000.jz4780-hdmi3 with driver dwc-hdmi
- [ 4.956000] bus: 'platform': really_probe: probing driver dwc-hdmi with device 10180000.jz4780-hdmi3
- [ 4.964000] dwc-hdmi 10180000.jz4780-hdmi3: no default pinctrl state
- [ 4.972000] platform 10180000.jz4780-hdmi3: Driver dwc-hdmi requests probe deferral
- [ 4.980000] platform 10180000.jz4780-hdmi3: Added to deferred list
- [ 4.988000] bus: 'platform': add driver jz4780_drm
- [ 4.992000] bus: 'platform': driver_probe_device: matched device 13050000.jz4780-lcdk with driver jz4780_drm
- [ 5.000000] bus: 'platform': really_probe: probing driver jz4780_drm with device 13050000.jz4780-lcdk
- [ 5.012000] jz4780_drm 13050000.jz4780-lcdk: no default pinctrl state
- [ 5.016000] platform 13050000.jz4780-lcdk: Driver jz4780_drm requests probe deferral
- [ 5.024000] platform 13050000.jz4780-lcdk: Added to deferred list
- [ 5.032000] bus: 'platform': add driver jz-efuse
- [ 5.036000] bus: 'platform': driver_probe_device: matched device 134100d0.efuse with driver jz-efuse
- [ 5.044000] bus: 'platform': really_probe: probing driver jz-efuse with device 134100d0.efuse
- [ 5.056000] jz-efuse 134100d0.efuse: no default pinctrl state
- [ 5.060000] of_get_named_gpiod_flags: parsed 'vddq-gpio' property of node '/soc/ahb2/efuse@134100D0[0]' - status (0)
- [ 5.072000] device: 'jz-efuse': device_add
- [ 5.076000] jz-efuse 134100d0.efuse: misc_register done!
- [ 5.080000] jz-efuse 134100d0.efuse: max_program_length = 0
- [ 5.088000] jz-efuse 134100d0.efuse: use_count = 0
- [ 5.092000] jz-efuse 134100d0.efuse: is_timer_on = 0
- [ 5.096000] jz-efuse 134100d0.efuse: gpio_vddq_en_n = 84
- [ 5.100000] jz-efuse 134100d0.efuse: rd_adj = 8
- [ 5.108000] jz-efuse 134100d0.efuse: rd_strobe = 7
- [ 5.112000] jz-efuse 134100d0.efuse: wr_adj = f
- [ 5.116000] jz-efuse 134100d0.efuse: wr_strobe = 140
- [ 5.120000] jz-efuse 134100d0.efuse: min_rd_adj = 1
- [ 5.124000] jz-efuse 134100d0.efuse: min_rd_adj_strobe = 3
- [ 5.132000] jz-efuse 134100d0.efuse: min_wr_adj = 1
- [ 5.136000] jz-efuse 134100d0.efuse: min_wr_adj_strobe = 87
- [ 5.140000] jz-efuse 134100d0.efuse: max_wr_adj_strobe = 217
- [ 5.148000] driver: 'jz-efuse': driver_bound: bound to device '134100d0.efuse'
- [ 5.156000] bus: 'platform': really_probe: bound device 134100d0.efuse to driver jz-efuse
- [ 5.164000] device class 'scsi_disk': registering
- [ 5.168000] bus: 'scsi': add driver sd
- [ 5.172000] device class 'mtd': registering
- [ 5.176000] device: 'mtd-unmap': device_add
- [ 5.180000] device: 'mtd-romap': device_add
- [ 5.184000] device: 'mtd-rwmap': device_add
- [ 5.188000] bus: 'platform': add driver of-flash
- [ 5.196000] bus: 'platform': add driver jz4780-nand
- [ 5.200000] bus: 'platform': driver_probe_device: matched device 1b000000.nand with driver jz4780-nand
- [ 5.208000] bus: 'platform': really_probe: probing driver jz4780-nand with device 1b000000.nand
- [ 5.220000] pinctrl core: add 2 pinmux maps
- [ 5.224000] jz4780-pinctrl 10010000.pinctrl: found group selector 16 for nemc-cs1
- [ 5.232000] jz4780-pinctrl 10010000.pinctrl: request pin 21 (PA21) for 1b000000.nand
- [ 5.236000] jz4780-pinctrl 10010000.pinctrl: set pin PA21 to function 0
- [ 5.244000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 21 0
- [ 5.252000] platform 1b000000.nand: Driver jz4780-nand requests probe deferral
- [ 5.260000] platform 1b000000.nand: Added to deferred list
- [ 5.264000] bus: 'platform': add driver jz4780-bch
- [ 5.268000] bus: 'platform': driver_probe_device: matched device 134d0000.bch with driver jz4780-bch
- [ 5.280000] bus: 'platform': really_probe: probing driver jz4780-bch with device 134d0000.bch
- [ 5.288000] jz4780-bch 134d0000.bch: no default pinctrl state
- [ 5.292000] jz4780-bch 134d0000.bch: JZ4780 BCH initialised
- [ 5.300000] driver: 'jz4780-bch': driver_bound: bound to device '134d0000.bch'
- [ 5.308000] bus: 'platform': really_probe: bound device 134d0000.bch to driver jz4780-bch
- [ 5.316000] bus: 'platform': add driver dm9000
- [ 5.320000] bus: 'platform': driver_probe_device: matched device 16000000.dm9000 with driver dm9000
- [ 5.328000] bus: 'platform': really_probe: probing driver dm9000 with device 16000000.dm9000
- [ 5.336000] dm9000 16000000.dm9000: no default pinctrl state
- [ 5.344000] of_get_named_gpiod_flags: parsed 'reset-gpio' property of node '/soc/ahb2/nemc@13410000/dm9000@6[0]' - status (0)
- [ 5.372000] dm9000 16000000.dm9000: eth%d: Invalid ethernet MAC address. Please set using ifconfig
- [ 5.380000] device: 'eth0': device_add
- [ 5.384000] eth0: dm9000b at b6000000,b6000002 IRQ 164 MAC: 06:46:c4:02:9a:15 (random)
- [ 5.392000] driver: 'dm9000': driver_bound: bound to device '16000000.dm9000'
- [ 5.400000] bus: 'platform': really_probe: bound device 16000000.dm9000 to driver dm9000
- [ 5.408000] bus: 'platform': add driver dwc2
- [ 5.412000] bus: 'platform': add driver dwc2-jz4780
- [ 5.416000] bus: 'platform': driver_probe_device: matched device 13500000.jz4780-otg with driver dwc2-jz4780
- [ 5.428000] bus: 'platform': really_probe: probing driver dwc2-jz4780 with device 13500000.jz4780-otg
- [ 5.436000] dwc2-jz4780 13500000.jz4780-otg: no default pinctrl state
- [ 6.336000] dwc2-jz4780 13500000.jz4780-otg: DWC OTG Controller
- [ 6.340000] dwc2-jz4780 13500000.jz4780-otg: new USB bus registered, assigned bus number 1
- [ 6.348000] dwc2-jz4780 13500000.jz4780-otg: irq 228, io mem 0x00000000
- [ 6.356000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 6.364000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 6.368000] usb usb1: Product: DWC OTG Controller
- [ 6.376000] usb usb1: Manufacturer: Linux 3.18.0 dwc2_hsotg
- [ 6.380000] usb usb1: SerialNumber: 13500000.jz4780-otg
- [ 6.384000] device: 'usb1': device_add
- [ 6.388000] bus: 'usb': add device usb1
- [ 6.392000] bus: 'usb': driver_probe_device: matched device usb1 with driver usb
- [ 6.400000] bus: 'usb': really_probe: probing driver usb with device usb1
- [ 6.408000] usb usb1: no of_node; not parsing pinctrl DT
- [ 6.412000] usb usb1: no default pinctrl state
- [ 6.416000] device: '1-0:1.0': device_add
- [ 6.424000] bus: 'usb': add device 1-0:1.0
- [ 6.428000] bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub
- [ 6.436000] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0
- [ 6.440000] hub 1-0:1.0: no of_node; not parsing pinctrl DT
- [ 6.448000] hub 1-0:1.0: no default pinctrl state
- [ 6.452000] hub 1-0:1.0: USB hub found
- [ 6.456000] hub 1-0:1.0: 1 port detected
- [ 6.460000] device: 'usb1-port1': device_add
- [ 6.464000] driver: 'hub': driver_bound: bound to device '1-0:1.0'
- [ 6.472000] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub
- [ 6.476000] device: 'ep_81': device_add
- [ 6.480000] driver: 'usb': driver_bound: bound to device 'usb1'
- [ 6.488000] bus: 'usb': really_probe: bound device usb1 to driver usb
- [ 6.492000] device: 'ep_00': device_add
- [ 6.496000] driver: 'dwc2-jz4780': driver_bound: bound to device '13500000.jz4780-otg'
- [ 6.504000] bus: 'platform': really_probe: bound device 13500000.jz4780-otg to driver dwc2-jz4780
- [ 6.516000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 6.520000] ehci-platform: EHCI generic platform driver
- [ 6.528000] bus: 'platform': add driver ehci-platform
- [ 6.532000] bus: 'platform': add driver jz4780-ehci
- [ 6.536000] bus: 'platform': driver_probe_device: matched device 13490000.jz4780-ehci with driver jz4780-ehci
- [ 6.548000] bus: 'platform': really_probe: probing driver jz4780-ehci with device 13490000.jz4780-ehci
- [ 6.556000] jz4780-ehci 13490000.jz4780-ehci: no default pinctrl state
- [ 6.564000] of_get_named_gpiod_flags: parsed 'ingenic,vbus-gpio' property of node '/soc/ahb2/jz4780-ehci@0x13490000[0]' - status (0)
- [ 6.576000] jz4780-ehci 13490000.jz4780-ehci: EHCI Host Controller
- [ 6.580000] jz4780-ehci 13490000.jz4780-ehci: new USB bus registered, assigned bus number 2
- [ 6.592000] jz4780-ehci 13490000.jz4780-ehci: irq 226, io mem 0x13490000
- [ 6.608000] jz4780-ehci 13490000.jz4780-ehci: USB 2.0 started, EHCI 1.00
- [ 6.612000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 6.620000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 6.628000] usb usb2: Product: EHCI Host Controller
- [ 6.632000] usb usb2: Manufacturer: Linux 3.18.0 ehci_hcd
- [ 6.636000] usb usb2: SerialNumber: 13490000.jz4780-ehci
- [ 6.644000] device: 'usb2': device_add
- [ 6.648000] bus: 'usb': add device usb2
- [ 6.652000] bus: 'usb': driver_probe_device: matched device usb2 with driver usb
- [ 6.660000] bus: 'usb': really_probe: probing driver usb with device usb2
- [ 6.664000] usb usb2: no of_node; not parsing pinctrl DT
- [ 6.672000] usb usb2: no default pinctrl state
- [ 6.676000] device: '2-0:1.0': device_add
- [ 6.680000] bus: 'usb': add device 2-0:1.0
- [ 6.684000] bus: 'usb': driver_probe_device: matched device 2-0:1.0 with driver hub
- [ 6.692000] bus: 'usb': really_probe: probing driver hub with device 2-0:1.0
- [ 6.700000] hub 2-0:1.0: no of_node; not parsing pinctrl DT
- [ 6.704000] hub 2-0:1.0: no default pinctrl state
- [ 6.708000] hub 2-0:1.0: USB hub found
- [ 6.712000] hub 2-0:1.0: 1 port detected
- [ 6.716000] device: 'usb2-port1': device_add
- [ 6.720000] driver: 'hub': driver_bound: bound to device '2-0:1.0'
- [ 6.728000] bus: 'usb': really_probe: bound device 2-0:1.0 to driver hub
- [ 6.732000] device: 'ep_81': device_add
- [ 6.736000] driver: 'usb': driver_bound: bound to device 'usb2'
- [ 6.744000] bus: 'usb': really_probe: bound device usb2 to driver usb
- [ 6.748000] device: 'ep_00': device_add
- [ 6.752000] driver: 'jz4780-ehci': driver_bound: bound to device '13490000.jz4780-ehci'
- [ 6.760000] bus: 'platform': really_probe: bound device 13490000.jz4780-ehci to driver jz4780-ehci
- [ 6.768000] bus: 'usb': add driver uas
- [ 6.772000] usbcore: registered new interface driver uas
- [ 6.780000] bus: 'usb': add driver usb-storage
- [ 6.784000] usbcore: registered new interface driver usb-storage
- [ 6.788000] device: 'mice': device_add
- [ 6.792000] device: 'psaux': device_add
- [ 6.796000] mousedev: PS/2 mouse device common for all mice
- [ 6.804000] bus: 'platform': add driver jz47xx-rtc
- [ 6.808000] bus: 'platform': driver_probe_device: matched device 10003000.rtc with driver jz47xx-rtc
- [ 6.816000] bus: 'platform': really_probe: probing driver jz47xx-rtc with device 10003000.rtc
- [ 6.824000] jz47xx-rtc 10003000.rtc: no default pinctrl state
- [ 6.832000] device: 'rtc0': device_add
- [ 6.836000] rtc rtc0: 10003000.rtc: dev (254:0)
- [ 6.840000] jz47xx-rtc 10003000.rtc: rtc core: registered 10003000.rtc as rtc0
- [ 6.844000] driver: 'jz47xx-rtc': driver_bound: bound to device '10003000.rtc'
- [ 6.852000] bus: 'platform': really_probe: bound device 10003000.rtc to driver jz47xx-rtc
- [ 6.860000] i2c /dev entries driver
- [ 6.864000] device class 'i2c-dev': registering
- [ 6.868000] bus: 'platform': add driver jz4780-i2c
- [ 6.872000] bus: 'platform': driver_probe_device: matched device 10050000.i2c0 with driver jz4780-i2c
- [ 6.884000] bus: 'platform': really_probe: probing driver jz4780-i2c with device 10050000.i2c0
- [ 6.892000] pinctrl core: add 3 pinmux maps
- [ 6.896000] jz4780-pinctrl 10010000.pinctrl: found group selector 17 for i2c0-data
- [ 6.900000] usb 1-1: new high-speed USB device number 2 using dwc2-jz4780
- [ 6.912000] jz4780-pinctrl 10010000.pinctrl: request pin 126 (PD30) for 10050000.i2c0
- [ 6.916000] jz4780-pinctrl 10010000.pinctrl: request pin 127 (PD31) for 10050000.i2c0
- [ 6.924000] jz4780-pinctrl 10010000.pinctrl: set pin PD30 to function 0
- [ 6.932000] jz4780-pinctrl 10010000.pinctrl: set pin PD31 to function 0
- [ 6.940000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 126 0
- [ 6.944000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 127 0
- [ 6.952000] jz4780-i2c 10050000.i2c0: Bus frequency is 100 KHz
- [ 6.956000] device: 'i2c-0': device_add
- [ 6.960000] bus: 'i2c': add device i2c-0
- [ 6.964000] device: 'i2c-0': device_add
- [ 6.972000] device: '0-005a': device_add
- [ 6.972000] bus: 'i2c': add device 0-005a
- [ 6.976000] bus: 'i2c': driver_probe_device: matched device 0-005a with driver act8600
- [ 6.984000] bus: 'i2c': really_probe: probing driver act8600 with device 0-005a
- [ 6.992000] act8600 0-005a: no default pinctrl state
- [ 6.996000] device: 'regulator.8': device_add
- [ 7.004000] vcore1v2: 1000 <--> 1400 mV at 1200 mV
- [ 7.008000] device: 'regulator.9': device_add
- [ 7.012000] vddmem1v5: 1500 mV
- [ 7.016000] device: 'regulator.10': device_add
- [ 7.024000] vccio3v3: 3300 mV
- [ 7.028000] device: 'regulator.11': device_add
- [ 7.032000] SUDCDC_REG4: at 5000 mV
- [ 7.036000] device: 'regulator.12': device_add
- [ 7.044000] vcc2.5: 2500 mV
- [ 7.044000] device: 'regulator.13': device_add
- [ 7.052000] vwifi3v3: 3300 mV
- [ 7.056000] device: 'regulator.14': device_add
- [ 7.060000] vcim2v8: 2800 mV
- [ 7.064000] device: 'regulator.15': device_add
- [ 7.072000] vcim1v5: 1500 mV
- [ 7.076000] device: 'regulator.16': device_add
- [ 7.080000] vrtc1v8: 1800 mV
- [ 7.084000] device: 'regulator.17': device_add
- [ 7.088000] vrtc1v2: 1200 mV
- [ 7.092000] device: 'regulator.18': device_add
- [ 7.096000] VBUS: no parameters
- [ 7.100000] device: 'regulator.19': device_add
- [ 7.108000] USB_CHARGER: at 400 mA
- [ 7.108000] driver: 'act8600': driver_bound: bound to device '0-005a'
- [ 7.116000] bus: 'i2c': really_probe: bound device 0-005a to driver act8600
- [ 7.124000] driver: 'jz4780-i2c': driver_bound: bound to device '10050000.i2c0'
- [ 7.132000] bus: 'platform': really_probe: bound device 10050000.i2c0 to driver jz4780-i2c
- [ 7.140000] bus: 'platform': driver_probe_device: matched device 10051000.i2c1 with driver jz4780-i2c
- [ 7.148000] bus: 'platform': really_probe: probing driver jz4780-i2c with device 10051000.i2c1
- [ 7.156000] pinctrl core: add 3 pinmux maps
- [ 7.160000] jz4780-pinctrl 10010000.pinctrl: found group selector 18 for i2c1-data
- [ 7.168000] jz4780-pinctrl 10010000.pinctrl: request pin 158 (PE30) for 10051000.i2c1
- [ 7.176000] jz4780-pinctrl 10010000.pinctrl: request pin 159 (PE31) for 10051000.i2c1
- [ 7.184000] jz4780-pinctrl 10010000.pinctrl: set pin PE30 to function 0
- [ 7.192000] jz4780-pinctrl 10010000.pinctrl: set pin PE31 to function 0
- [ 7.200000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 158 0
- [ 7.204000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 159 0
- [ 7.212000] jz4780-i2c 10051000.i2c1: Bus frequency is 100 KHz
- [ 7.216000] device: 'i2c-1': device_add
- [ 7.220000] bus: 'i2c': add device i2c-1
- [ 7.224000] device: 'i2c-1': device_add
- [ 7.228000] driver: 'jz4780-i2c': driver_bound: bound to device '10051000.i2c1'
- [ 7.236000] bus: 'platform': really_probe: bound device 10051000.i2c1 to driver jz4780-i2c
- [ 7.244000] bus: 'platform': driver_probe_device: matched device 10052000.i2c2 with driver jz4780-i2c
- [ 7.256000] bus: 'platform': really_probe: probing driver jz4780-i2c with device 10052000.i2c2
- [ 7.264000] pinctrl core: add 3 pinmux maps
- [ 7.268000] jz4780-pinctrl 10010000.pinctrl: found group selector 19 for i2c2-data
- [ 7.276000] jz4780-pinctrl 10010000.pinctrl: request pin 176 (PF16) for 10052000.i2c2
- [ 7.284000] jz4780-pinctrl 10010000.pinctrl: request pin 177 (PF17) for 10052000.i2c2
- [ 7.292000] jz4780-pinctrl 10010000.pinctrl: set pin PF16 to function 2
- [ 7.300000] jz4780-pinctrl 10010000.pinctrl: set pin PF17 to function 2
- [ 7.304000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 176 0
- [ 7.312000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 177 0
- [ 7.320000] jz4780-i2c 10052000.i2c2: Bus frequency is 100 KHz
- [ 7.324000] device: 'i2c-2': device_add
- [ 7.328000] bus: 'i2c': add device i2c-2
- [ 7.332000] device: 'i2c-2': device_add
- [ 7.336000] driver: 'jz4780-i2c': driver_bound: bound to device '10052000.i2c2'
- [ 7.344000] bus: 'platform': really_probe: bound device 10052000.i2c2 to driver jz4780-i2c
- [ 7.352000] bus: 'platform': driver_probe_device: matched device 10053000.i2c3 with driver jz4780-i2c
- [ 7.360000] bus: 'platform': really_probe: probing driver jz4780-i2c with device 10053000.i2c3
- [ 7.372000] pinctrl core: add 3 pinmux maps
- [ 7.376000] jz4780-pinctrl 10010000.pinctrl: found group selector 20 for i2c3-data
- [ 7.384000] jz4780-pinctrl 10010000.pinctrl: request pin 106 (PD10) for 10053000.i2c3
- [ 7.392000] jz4780-pinctrl 10010000.pinctrl: request pin 107 (PD11) for 10053000.i2c3
- [ 7.396000] jz4780-pinctrl 10010000.pinctrl: set pin PD10 to function 1
- [ 7.404000] jz4780-pinctrl 10010000.pinctrl: set pin PD11 to function 1
- [ 7.412000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 106 0
- [ 7.416000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 107 0
- [ 7.424000] jz4780-i2c 10053000.i2c3: Bus frequency is 100 KHz
- [ 7.432000] device: 'i2c-3': device_add
- [ 7.436000] bus: 'i2c': add device i2c-3
- [ 7.440000] device: 'i2c-3': device_add
- [ 7.444000] driver: 'jz4780-i2c': driver_bound: bound to device '10053000.i2c3'
- [ 7.452000] bus: 'platform': really_probe: bound device 10053000.i2c3 to driver jz4780-i2c
- [ 7.460000] bus: 'platform': driver_probe_device: matched device 10054000.i2c4 with driver jz4780-i2c
- [ 7.468000] bus: 'platform': really_probe: probing driver jz4780-i2c with device 10054000.i2c4
- [ 7.476000] pinctrl core: add 3 pinmux maps
- [ 7.480000] jz4780-pinctrl 10010000.pinctrl: found group selector 22 for i2c4-data-pf
- [ 7.488000] jz4780-pinctrl 10010000.pinctrl: request pin 185 (PF25) for 10054000.i2c4
- [ 7.496000] jz4780-pinctrl 10010000.pinctrl: request pin 184 (PF24) for 10054000.i2c4
- [ 7.504000] jz4780-pinctrl 10010000.pinctrl: set pin PF25 to function 1
- [ 7.512000] jz4780-pinctrl 10010000.pinctrl: set pin PF24 to function 1
- [ 7.516000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 185 0
- [ 7.524000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 184 0
- [ 7.532000] jz4780-i2c 10054000.i2c4: Bus frequency is 100 KHz
- [ 7.536000] device: 'i2c-4': device_add
- [ 7.540000] bus: 'i2c': add device i2c-4
- [ 7.544000] device: 'i2c-4': device_add
- [ 7.548000] driver: 'jz4780-i2c': driver_bound: bound to device '10054000.i2c4'
- [ 7.556000] bus: 'platform': really_probe: bound device 10054000.i2c4 to driver jz4780-i2c
- [ 7.564000] bus: 'platform': add driver jz47xx-wdt
- [ 7.572000] bus: 'platform': driver_probe_device: matched device 10002000.jz47xx-watchdog with driver jz47xx-wdt
- [ 7.580000] bus: 'platform': really_probe: probing driver jz47xx-wdt with device 10002000.jz47xx-watchdog
- [ 7.592000] jz47xx-wdt 10002000.jz47xx-watchdog: no default pinctrl state
- [ 7.596000] device: 'watchdog': device_add
- [ 7.600000] device: 'watchdog0': device_add
- [ 7.604000] driver: 'jz47xx-wdt': driver_bound: bound to device '10002000.jz47xx-watchdog'
- [ 7.616000] bus: 'platform': really_probe: bound device 10002000.jz47xx-watchdog to driver jz47xx-wdt
- [ 7.624000] bus: 'platform': add driver leds-gpio
- [ 7.628000] device: 'timer': device_add
- [ 7.632000] device: 'seq': device_add
- [ 7.636000] device: 'sequencer': device_add
- [ 7.640000] device: 'sequencer2': device_add
- [ 7.648000] Registering platform device 'snd-soc-dummy'. Parent at platform
- [ 7.652000] device: 'snd-soc-dummy': device_add
- [ 7.656000] bus: 'platform': add device snd-soc-dummy
- [ 7.664000] bus: 'platform': add driver snd-soc-dummy
- [ 7.668000] bus: 'platform': driver_probe_device: matched device snd-soc-dummy with driver snd-soc-dummy
- [ 7.680000] bus: 'platform': really_probe: probing driver snd-soc-dummy with device snd-soc-dummy
- [ 7.688000] snd-soc-dummy snd-soc-dummy: no of_node; not parsing pinctrl DT
- [ 7.696000] snd-soc-dummy snd-soc-dummy: no default pinctrl state
- [ 7.700000] driver: 'snd-soc-dummy': driver_bound: bound to device 'snd-soc-dummy'
- [ 7.708000] bus: 'platform': really_probe: bound device snd-soc-dummy to driver snd-soc-dummy
- [ 7.716000] bus: 'platform': add driver soc-audio
- [ 7.720000] bus: 'platform': add driver jz4740-i2s
- [ 7.728000] bus: 'platform': driver_probe_device: matched device 10020000.i2s with driver jz4740-i2s
- [ 7.736000] bus: 'platform': really_probe: probing driver jz4740-i2s with device 10020000.i2s
- [ 7.744000] jz4740-i2s 10020000.i2s: no default pinctrl state
- [ 7.752000] driver: 'jz4740-i2s': driver_bound: bound to device '10020000.i2s'
- [ 7.756000] bus: 'platform': really_probe: bound device 10020000.i2s to driver jz4740-i2s
- [ 7.768000] bus: 'platform': add driver ingenic-ci20-audio
- [ 7.772000] bus: 'platform': driver_probe_device: matched device board:audio-ci20 with driver ingenic-ci20-audio
- [ 7.784000] bus: 'platform': really_probe: probing driver ingenic-ci20-audio with device board:audio-ci20
- [ 7.792000] ingenic-ci20-audio board:audio-ci20: no default pinctrl state
- [ 7.800000] ingenic-ci20-audio board:audio-ci20: ASoC: CODEC DAI jz4780-hifi not registered
- [ 7.808000] ingenic-ci20-audio board:audio-ci20: snd_soc_register_card() failed:-517
- [ 7.816000] platform board:audio-ci20: Driver ingenic-ci20-audio requests probe deferral
- [ 7.824000] platform board:audio-ci20: Added to deferred list
- [ 7.828000] TCP: cubic registered
- [ 7.832000] NET: Registered protocol family 17
- [ 7.836000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
- [ 7.852000] 8021q: 802.1Q VLAN Support v1.8
- [ 7.856000] device: 'cpu_dma_latency': device_add
- [ 7.860000] device: 'network_latency': device_add
- [ 7.864000] device: 'network_throughput': device_add
- [ 7.868000] device: 'memory_bandwidth': device_add
- [ 7.876000] Error: Driver 'jz4780_drm' is already registered, aborting...
- [ 7.884000] platform 10180000.jz4780-hdmi3: Retrying from deferred list
- [ 7.888000] bus: 'platform': driver_probe_device: matched device 10180000.jz4780-hdmi3 with driver dwc-hdmi
- [ 7.896000] bus: 'platform': really_probe: probing driver dwc-hdmi with device 10180000.jz4780-hdmi3
- [ 7.900000] usb 1-1: New USB device found, idVendor=0001, idProduct=7778
- [ 7.900000] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 7.900000] usb 1-1: Product: Mass Storage
- [ 7.900000] usb 1-1: Manufacturer: Generic
- [ 7.900000] usb 1-1: SerialNumber: 0B322D5F
- [ 7.900000] device: '1-1': device_add
- [ 7.900000] bus: 'usb': add device 1-1
- [ 7.900000] bus: 'usb': driver_probe_device: matched device 1-1 with driver usb
- [ 7.900000] bus: 'usb': really_probe: probing driver usb with device 1-1
- [ 7.900000] usb 1-1: no of_node; not parsing pinctrl DT
- [ 7.900000] usb 1-1: no default pinctrl state
- [ 7.900000] device: '1-1:1.0': device_add
- [ 7.900000] bus: 'usb': add device 1-1:1.0
- [ 7.900000] bus: 'usb': driver_probe_device: matched device 1-1:1.0 with driver uas
- [ 7.900000] bus: 'usb': really_probe: probing driver uas with device 1-1:1.0
- [ 7.900000] uas 1-1:1.0: no of_node; not parsing pinctrl DT
- [ 7.900000] uas 1-1:1.0: no default pinctrl state
- [ 7.900000] uas: probe of 1-1:1.0 rejects match -19
- [ 7.900000] bus: 'usb': driver_probe_device: matched device 1-1:1.0 with driver usb-storage
- [ 7.900000] bus: 'usb': really_probe: probing driver usb-storage with device 1-1:1.0
- [ 7.900000] usb-storage 1-1:1.0: no of_node; not parsing pinctrl DT
- [ 7.900000] usb-storage 1-1:1.0: no default pinctrl state
- [ 7.900000] usb-storage 1-1:1.0: USB Mass Storage device detected
- [ 7.904000] scsi host0: usb-storage 1-1:1.0
- [ 7.904000] device: 'host0': device_add
- [ 7.904000] bus: 'scsi': add device host0
- [ 7.904000] device: 'host0': device_add
- [ 7.904000] driver: 'usb-storage': driver_bound: bound to device '1-1:1.0'
- [ 7.904000] bus: 'usb': really_probe: bound device 1-1:1.0 to driver usb-storage
- [ 7.904000] device: 'ep_01': device_add
- [ 7.904000] device: 'ep_82': device_add
- [ 7.904000] driver: 'usb': driver_bound: bound to device '1-1'
- [ 7.904000] bus: 'usb': really_probe: bound device 1-1 to driver usb
- [ 7.904000] device: 'ep_00': device_add
- [ 8.088000] dwc-hdmi 10180000.jz4780-hdmi3: no default pinctrl state
- [ 8.096000] dwc-hdmi 10180000.jz4780-hdmi3: Detected HDMI controller 0x13:0x1a:0xa0:0xc1
- [ 8.104000] driver: 'dwc-hdmi': driver_bound: bound to device '10180000.jz4780-hdmi3'
- [ 8.112000] bus: 'platform': really_probe: bound device 10180000.jz4780-hdmi3 to driver dwc-hdmi
- [ 8.120000] platform 13050000.jz4780-lcdk: Retrying from deferred list
- [ 8.124000] bus: 'platform': driver_probe_device: matched device 13050000.jz4780-lcdk with driver jz4780_drm
- [ 8.136000] bus: 'platform': really_probe: probing driver jz4780_drm with device 13050000.jz4780-lcdk
- [ 8.144000] jz4780_drm 13050000.jz4780-lcdk: no default pinctrl state
- [ 8.152000] device: 'controlD64': device_add
- [ 8.156000] device: 'card0': device_add
- [ 8.160000] device: 'card0-HDMI-A-1': device_add
- [ 8.164000] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 8.172000] [drm] No driver support for vblank timestamp query.
- [ 8.176000] i2c i2c-4: txabrt: 0x00000001
- [ 8.180000] i2c i2c-4: device addr=50
- [ 8.184000] i2c i2c-4: send cmd count:0 0
- [ 8.188000] i2c i2c-4: receive data count:0 0
- [ 8.192000] i2c i2c-4: I2C TXABRT[0]=ABRT_7B_ADDR_NOACK
- [ 8.196000] i2c i2c-4: I2C xfer failed
- [ 8.200000] i2c i2c-4: txabrt: 0x00000001
- [ 8.204000] i2c i2c-4: device addr=50
- [ 8.208000] i2c i2c-4: send cmd count:0 0
- [ 8.212000] i2c i2c-4: receive data count:0 0
- [ 8.216000] i2c i2c-4: I2C TXABRT[0]=ABRT_7B_ADDR_NOACK
- [ 8.224000] i2c i2c-4: I2C xfer failed
- [ 8.228000] i2c i2c-4: txabrt: 0x00000001
- [ 8.232000] i2c i2c-4: device addr=50
- [ 8.236000] i2c i2c-4: send cmd count:0 0
- [ 8.240000] i2c i2c-4: receive data count:0 0
- [ 8.244000] i2c i2c-4: I2C TXABRT[0]=ABRT_7B_ADDR_NOACK
- [ 8.248000] i2c i2c-4: I2C xfer failed
- [ 8.252000] i2c i2c-4: txabrt: 0x00000001
- [ 8.256000] i2c i2c-4: device addr=50
- [ 8.260000] i2c i2c-4: send cmd count:0 0
- [ 8.264000] i2c i2c-4: receive data count:0 0
- [ 8.268000] i2c i2c-4: I2C TXABRT[0]=ABRT_7B_ADDR_NOACK
- [ 8.272000] i2c i2c-4: I2C xfer failed
- [ 8.276000] i2c i2c-4: txabrt: 0x00000001
- [ 8.280000] i2c i2c-4: device addr=50
- [ 8.284000] i2c i2c-4: send cmd count:0 0
- [ 8.288000] i2c i2c-4: receive data count:0 0
- [ 8.292000] i2c i2c-4: I2C TXABRT[0]=ABRT_7B_ADDR_NOACK
- [ 8.296000] i2c i2c-4: I2C xfer failed
- [ 8.308000] device: 'fb0': device_add
- [ 8.312000] jz4780_drm 13050000.jz4780-lcdk: fb0: frame buffer device
- [ 8.316000] jz4780_drm 13050000.jz4780-lcdk: registered panic notifier
- [ 8.336000] [drm] Initialized jz4780 1.0.0 20140623 on minor 0
- [ 8.340000] driver: 'jz4780_drm': driver_bound: bound to device '13050000.jz4780-lcdk'
- [ 8.348000] bus: 'platform': really_probe: bound device 13050000.jz4780-lcdk to driver jz4780_drm
- [ 8.356000] platform 1b000000.nand: Retrying from deferred list
- [ 8.360000] bus: 'platform': driver_probe_device: matched device 1b000000.nand with driver jz4780-nand
- [ 8.372000] bus: 'platform': really_probe: probing driver jz4780-nand with device 1b000000.nand
- [ 8.380000] pinctrl core: add 2 pinmux maps
- [ 8.384000] jz4780-pinctrl 10010000.pinctrl: found group selector 16 for nemc-cs1
- [ 8.392000] jz4780-pinctrl 10010000.pinctrl: request pin 21 (PA21) for 1b000000.nand
- [ 8.400000] jz4780-pinctrl 10010000.pinctrl: set pin PA21 to function 0
- [ 8.404000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 21 0
- [ 8.412000] of_get_named_gpiod_flags: parsed 'ingenic,busy-gpio' property of node '/soc/ahb2/nemc@13410000/nand@1[0]' - status (0)
- [ 8.424000] of_get_named_gpiod_flags: parsed 'ingenic,wp-gpio' property of node '/soc/ahb2/nemc@13410000/nand@1[0]' - status (0)
- [ 8.436000] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x88
- [ 8.440000] nand: Micron MT29F64G08CBAAAWP
- [ 8.444000] nand: 8192MiB, MLC, page size: 8192, OOB size: 448
- [ 8.452000] jz4780-nand 1b000000.nand: using hardware BCH (strength 24, size 1024, bytes 42)
- [ 8.460000] Bad block table found at page 1048320, version 0x01
- [ 8.468000] Bad block table found at page 1048064, version 0x01
- [ 8.476000] nand_read_bbt: bad block at 0x00000b400000
- [ 8.476000] nand_read_bbt: bad block at 0x00000b600000
- [ 8.484000] 4 ofpart partitions found on MTD device jz4780-nand
- [ 8.488000] Creating 4 MTD partitions on "jz4780-nand":
- [ 8.496000] 0x000000000000-0x000000800000 : "u-boot-spl"
- [ 8.500000] device: 'mtd0': device_add
- [ 8.504000] device: 'mtd0ro': device_add
- [ 8.508000] device: '31:0': device_add
- [ 8.512000] device: 'mtdblock0': device_add
- [ 8.516000] 0x000000800000-0x000000a00000 : "u-boot"
- [ 8.520000] device: 'mtd1': device_add
- [ 8.524000] device: 'mtd1ro': device_add
- [ 8.528000] device: '31:1': device_add
- [ 8.532000] device: 'mtdblock1': device_add
- [ 8.536000] 0x000000a00000-0x000000c00000 : "u-boot-env"
- [ 8.540000] device: 'mtd2': device_add
- [ 8.544000] device: 'mtd2ro': device_add
- [ 8.548000] device: '31:2': device_add
- [ 8.552000] device: 'mtdblock2': device_add
- [ 8.556000] 0x000000c00000-0x000200000000 : "system"
- [ 8.560000] device: 'mtd3': device_add
- [ 8.564000] device: 'mtd3ro': device_add
- [ 8.568000] device: '31:3': device_add
- [ 8.572000] device: 'mtdblock3': device_add
- [ 8.576000] jz4780-nand 1b000000.nand: JZ4780 NAND initialised
- [ 8.584000] driver: 'jz4780-nand': driver_bound: bound to device '1b000000.nand'
- [ 8.588000] bus: 'platform': really_probe: bound device 1b000000.nand to driver jz4780-nand
- [ 8.600000] platform board:audio-ci20: Retrying from deferred list
- [ 8.604000] bus: 'platform': driver_probe_device: matched device board:audio-ci20 with driver ingenic-ci20-audio
- [ 8.616000] bus: 'platform': really_probe: probing driver ingenic-ci20-audio with device board:audio-ci20
- [ 8.624000] ingenic-ci20-audio board:audio-ci20: no default pinctrl state
- [ 8.632000] gpio-109 (Headphone Mute): gpiod_request: status -16
- [ 8.636000] ingenic-ci20-audio board:audio-ci20: Failed to request mute GPIO: -16
- [ 8.644000] gpio-174 (Mic Switch Enable): gpiod_request: status -16
- [ 8.652000] ingenic-ci20-audio board:audio-ci20: Failed to request mic switch enable GPIO: -16
- [ 8.660000] ingenic-ci20-audio board:audio-ci20: ASoC: CODEC DAI jz4780-hifi not registered
- [ 8.668000] ingenic-ci20-audio board:audio-ci20: snd_soc_register_card() failed:-517
- [ 8.676000] platform board:audio-ci20: Driver ingenic-ci20-audio requests probe deferral
- [ 8.684000] platform board:audio-ci20: Added to deferred list
- [ 8.688000] device class 'ubi': registering
- [ 8.692000] device: 'ubi_ctrl': device_add
- [ 8.696000] jz47xx-rtc 10003000.rtc: setting system clock to 1970-01-01 03:47:31 UTC (13651)
- [ 8.712000] wifi_power_gpio: disabling
- [ 8.716000] clk: Not disabling unused clocks
- [ 8.720000] ALSA device list:
- [ 8.720000] No soundcards found.
- [ 8.724000] Waiting for root device /dev/sda3...
- [ 8.732000] driver_probe_done: probe_count = 0
- [ 8.840000] driver_probe_done: probe_count = 0
- [ 8.904000] scsi 0:0:0:0: Direct-Access Generic Flash Disk 8.00 PQ: 0 ANSI: 2
- [ 8.912000] device: 'target0:0:0': device_add
- [ 8.916000] bus: 'scsi': add device target0:0:0
- [ 8.920000] device: '0:0:0:0': device_add
- [ 8.924000] bus: 'scsi': add device 0:0:0:0
- [ 8.928000] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver sd
- [ 8.936000] bus: 'scsi': really_probe: probing driver sd with device 0:0:0:0
- [ 8.944000] sd 0:0:0:0: no of_node; not parsing pinctrl DT
- [ 8.948000] sd 0:0:0:0: no default pinctrl state
- [ 8.948000] driver_probe_done: probe_count = 1
- [ 8.960000] device: '0:0:0:0': device_add
- [ 8.964000] driver: 'sd': driver_bound: bound to device '0:0:0:0'
- [ 8.968000] bus: 'scsi': really_probe: bound device 0:0:0:0 to driver sd
- [ 8.968000] platform board:audio-ci20: Retrying from deferred list
- [ 8.968000] bus: 'platform': driver_probe_device: matched device board:audio-ci20 with driver ingenic-ci20-audio
- [ 8.968000] bus: 'platform': really_probe: probing driver ingenic-ci20-audio with device board:audio-ci20
- [ 8.968000] ingenic-ci20-audio board:audio-ci20: no default pinctrl state
- [ 8.968000] gpio-109 (Headphone Mute): gpiod_request: status -16
- [ 8.968000] ingenic-ci20-audio board:audio-ci20: Failed to request mute GPIO: -16
- [ 8.968000] gpio-174 (Mic Switch Enable): gpiod_request: status -16
- [ 8.968000] ingenic-ci20-audio board:audio-ci20: Failed to request mic switch enable GPIO: -16
- [ 8.968000] ingenic-ci20-audio board:audio-ci20: ASoC: CODEC DAI jz4780-hifi not registered
- [ 8.968000] ingenic-ci20-audio board:audio-ci20: snd_soc_register_card() failed:-517
- [ 8.968000] platform board:audio-ci20: Driver ingenic-ci20-audio requests probe deferral
- [ 8.968000] platform board:audio-ci20: Added to deferred list
- [ 9.044000] sd 0:0:0:0: [sda] 8192000 512-byte logical blocks: (4.19 GB/3.90 GiB)
- [ 9.052000] driver_probe_done: probe_count = 1
- [ 9.068000] sd 0:0:0:0: [sda] Write Protect is off
- [ 9.068000] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
- [ 9.084000] sd 0:0:0:0: [sda] No Caching mode page found
- [ 9.084000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 9.084000] device: '8:0': device_add
- [ 9.084000] device: 'sda': device_add
- [ 9.108000] device: '0:0:0:0': device_add
- [ 9.156000] driver_probe_done: probe_count = 0
- [ 9.348000] sda: sda1 sda2 sda3
- [ 9.348000] device: 'sda1': device_add
- [ 9.352000] device: 'sda2': device_add
- [ 9.356000] device: 'sda3': device_add
- [ 9.364000] sd 0:0:0:0: [sda] Attached SCSI removable disk
- [ 9.372000] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
- [ 9.380000] EXT4-fs (sda3): write access will be enabled during recovery
- [ 9.396000] EXT4-fs (sda3): recovery complete
- [ 9.404000] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
- [ 9.408000] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
- [ 9.416000] Freeing unused kernel memory: 236K (80555000 - 80590000)
- procd: Console is alive
- procd: - watchdog -
- [ 9.608000] random: nonblocking pool is initialized
- [ 9.720000] dwc2: exports duplicate symbol dwc2_handle_common_intr (owned by kernel)
- [ 9.740000] dwc2: exports duplicate symbol dwc2_handle_common_intr (owned by kernel)
- [ 9.760000] dwc2: exports duplicate symbol dwc2_handle_common_intr (owned by kernel)
- [ 9.784000] bus: 'mmc': add driver mmcblk
- [ 9.788000] dwc2: exports duplicate symbol dwc2_handle_common_intr (owned by kernel)
- procd: - preinit -
- Press the [f] key and hit [enter] to enter failsafe mode
- Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
- mounting /dev/root
- [ 13.728000] EXT4-fs (sda3): re-mounted. Opts: (null)
- procd: - early -
- procd: - watchdog -
- procd: - ubus -
- procd: - init -
- Please press Enter to activate this console.
- [ 15.816000] dwc2: exports duplicate symbol dwc2_handle_common_intr (owned by kernel)
- [ 15.832000] dwc2: exports duplicate symbol dwc2_handle_common_intr (owned by kernel)
- [ 15.856000] dwc2: exports duplicate symbol dwc2_handle_common_intr (owned by kernel)
- [ 15.880000] bus: 'hid': registered
- [ 15.884000] device class 'hidraw': registering
- [ 15.888000] hidraw: raw HID events driver (C) Jiri Kosina
- [ 15.896000] dwc2: exports duplicate symbol dwc2_handle_common_intr (owned by kernel)
- [ 15.912000] dwc2: exports duplicate symbol dwc2_handle_common_intr (owned by kernel)
- [ 15.932000] device class 'scsi_generic': registering
- [ 15.936000] device: 'sg0': device_add
- [ 15.940000] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 15.944000] dwc2: exports duplicate symbol dwc2_handle_common_intr (owned by kernel)
- [ 15.976000] Loading modules backported from Linux version master-2014-11-04-0-gf3660a2
- [ 15.984000] Backport generated by backports.git backports-20141023-2-g4ff890b
- [ 15.992000] dwc2: exports duplicate symbol dwc2_handle_common_intr (owned by kernel)
- [ 16.016000] bus: 'hid': add driver hid-generic
- [ 16.020000] bus: 'platform': add driver jz47xx-mmc
- [ 16.024000] bus: 'platform': driver_probe_device: matched device 13450000.msc with driver jz47xx-mmc
- [ 16.032000] bus: 'platform': really_probe: probing driver jz47xx-mmc with device 13450000.msc
- [ 16.040000] pinctrl core: add 7 pinmux maps
- [ 16.044000] jz4780-pinctrl 10010000.pinctrl: found group selector 8 for msc0-pe
- [ 16.052000] jz4780-pinctrl 10010000.pinctrl: request pin 148 (PE20) for 13450000.msc
- [ 16.060000] jz4780-pinctrl 10010000.pinctrl: request pin 149 (PE21) for 13450000.msc
- [ 16.068000] jz4780-pinctrl 10010000.pinctrl: request pin 150 (PE22) for 13450000.msc
- [ 16.076000] jz4780-pinctrl 10010000.pinctrl: request pin 151 (PE23) for 13450000.msc
- [ 16.084000] jz4780-pinctrl 10010000.pinctrl: request pin 156 (PE28) for 13450000.msc
- [ 16.092000] jz4780-pinctrl 10010000.pinctrl: request pin 157 (PE29) for 13450000.msc
- [ 16.096000] jz4780-pinctrl 10010000.pinctrl: set pin PE20 to function 0
- [ 16.104000] jz4780-pinctrl 10010000.pinctrl: set pin PE21 to function 0
- [ 16.112000] jz4780-pinctrl 10010000.pinctrl: set pin PE22 to function 0
- [ 16.116000] jz4780-pinctrl 10010000.pinctrl: set pin PE23 to function 0
- [ 16.124000] jz4780-pinctrl 10010000.pinctrl: set pin PE28 to function 0
- [ 16.132000] jz4780-pinctrl 10010000.pinctrl: set pin PE29 to function 0
- [ 16.136000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 148 0
- [ 16.144000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 149 0
- [ 16.152000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 150 0
- [ 16.156000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 151 0
- [ 16.164000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 156 0
- [ 16.168000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 157 0
- [ 16.176000] jz47xx-mmc 13450000.msc: GPIO lookup for consumer cd
- [ 16.180000] jz47xx-mmc 13450000.msc: using device tree for GPIO lookup
- [ 16.188000] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/soc/ahb2/msc@13450000[0]' - status (0)
- [ 16.200000] jz47xx-mmc 13450000.msc: Got CD GPIO
- [ 16.204000] jz47xx-mmc 13450000.msc: GPIO lookup for consumer wp
- [ 16.208000] jz47xx-mmc 13450000.msc: using device tree for GPIO lookup
- [ 16.216000] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/ahb2/msc@13450000[0]'
- [ 16.224000] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/ahb2/msc@13450000[0]'
- [ 16.236000] jz47xx-mmc 13450000.msc: using lookup tables for GPIO lookup
- [ 16.240000] jz47xx-mmc 13450000.msc: lookup for GPIO wp failed
- [ 16.248000] jz47xx-mmc 13450000.msc: No vmmc regulator found
- [ 16.252000] jz47xx-mmc 13450000.msc: No vqmmc regulator found
- [ 16.260000] device: 'mmc0': device_add
- [ 16.296000] jz47xx-mmc 13450000.msc: JZ SD/MMC card driver registered
- [ 16.300000] driver: 'jz47xx-mmc': driver_bound: bound to device '13450000.msc'
- [ 16.308000] bus: 'platform': really_probe: bound device 13450000.msc to driver jz47xx-mmc
- [ 16.312000] platform board:audio-ci20: Retrying from deferred list
- [ 16.312000] bus: 'platform': driver_probe_device: matched device board:audio-ci20 with driver ingenic-ci20-audio
- [ 16.312000] bus: 'platform': really_probe: probing driver ingenic-ci20-audio with device board:audio-ci20
- [ 16.312000] ingenic-ci20-audio board:audio-ci20: no default pinctrl state
- [ 16.312000] gpio-109 (Headphone Mute): gpiod_request: status -16
- [ 16.312000] ingenic-ci20-audio board:audio-ci20: Failed to request mute GPIO: -16
- [ 16.312000] gpio-174 (Mic Switch Enable): gpiod_request: status -16
- [ 16.312000] ingenic-ci20-audio board:audio-ci20: Failed to request mic switch enable GPIO: -16
- [ 16.312000] ingenic-ci20-audio board:audio-ci20: ASoC: CODEC DAI jz4780-hifi not registered
- [ 16.312000] ingenic-ci20-audio board:audio-ci20: snd_soc_register_card() failed:-517
- [ 16.312000] platform board:audio-ci20: Driver ingenic-ci20-audio requests probe deferral
- [ 16.312000] platform board:audio-ci20: Added to deferred list
- [ 16.404000] bus: 'platform': driver_probe_device: matched device 13460000.msc with driver jz47xx-mmc
- [ 16.416000] bus: 'platform': really_probe: probing driver jz47xx-mmc with device 13460000.msc
- [ 16.424000] pinctrl core: add 7 pinmux maps
- [ 16.428000] jz4780-pinctrl 10010000.pinctrl: found group selector 9 for msc1-pd
- [ 16.436000] jz4780-pinctrl 10010000.pinctrl: request pin 116 (PD20) for 13460000.msc
- [ 16.444000] jz4780-pinctrl 10010000.pinctrl: request pin 117 (PD21) for 13460000.msc
- [ 16.448000] jz4780-pinctrl 10010000.pinctrl: request pin 118 (PD22) for 13460000.msc
- [ 16.456000] jz4780-pinctrl 10010000.pinctrl: request pin 119 (PD23) for 13460000.msc
- [ 16.464000] jz4780-pinctrl 10010000.pinctrl: request pin 120 (PD24) for 13460000.msc
- [ 16.472000] jz4780-pinctrl 10010000.pinctrl: request pin 121 (PD25) for 13460000.msc
- [ 16.480000] jz4780-pinctrl 10010000.pinctrl: set pin PD20 to function 0
- [ 16.488000] jz4780-pinctrl 10010000.pinctrl: set pin PD21 to function 0
- [ 16.492000] jz4780-pinctrl 10010000.pinctrl: set pin PD22 to function 0
- [ 16.500000] jz4780-pinctrl 10010000.pinctrl: set pin PD23 to function 0
- [ 16.508000] jz4780-pinctrl 10010000.pinctrl: set pin PD24 to function 0
- [ 16.512000] jz4780-pinctrl 10010000.pinctrl: set pin PD25 to function 0
- [ 16.520000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 116 0
- [ 16.528000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 117 0
- [ 16.532000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 118 0
- [ 16.540000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 119 0
- [ 16.544000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 120 0
- [ 16.552000] jz4780-pinctrl 10010000.pinctrl: jz4780_pinconf_set 121 0
- [ 16.560000] jz47xx-mmc 13460000.msc: GPIO lookup for consumer cd
- [ 16.564000] jz47xx-mmc 13460000.msc: using device tree for GPIO lookup
- [ 16.572000] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc/ahb2/msc@13460000[0]'
- [ 16.580000] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/soc/ahb2/msc@13460000[0]'
- [ 16.592000] jz47xx-mmc 13460000.msc: using lookup tables for GPIO lookup
- [ 16.596000] jz47xx-mmc 13460000.msc: lookup for GPIO cd failed
- [ 16.604000] jz47xx-mmc 13460000.msc: GPIO lookup for consumer wp
- [ 16.608000] jz47xx-mmc 13460000.msc: using device tree for GPIO lookup
- [ 16.616000] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/ahb2/msc@13460000[0]'
- [ 16.624000] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/ahb2/msc@13460000[0]'
- [ 16.636000] jz47xx-mmc 13460000.msc: using lookup tables for GPIO lookup
- [ 16.640000] jz47xx-mmc 13460000.msc: lookup for GPIO wp failed
- [ 16.648000] jz47xx-mmc 13460000.msc: No vqmmc regulator found
- [ 16.652000] device: 'mmc1': device_add
- [ 16.688000] jz47xx-mmc 13460000.msc: JZ SD/MMC card driver registered
- [ 16.692000] driver: 'jz47xx-mmc': driver_bound: bound to device '13460000.msc'
- [ 16.700000] bus: 'platform': really_probe: bound device 13460000.msc to driver jz47xx-mmc
- [ 16.700000] platform board:audio-ci20: Retrying from deferred list
- [ 16.700000] bus: 'platform': driver_probe_device: matched device board:audio-ci20 with driver ingenic-ci20-audio
- [ 16.700000] bus: 'platform': really_probe: probing driver ingenic-ci20-audio with device board:audio-ci20
- [ 16.700000] ingenic-ci20-audio board:audio-ci20: no default pinctrl state
- [ 16.700000] gpio-109 (Headphone Mute): gpiod_request: status -16
- [ 16.700000] ingenic-ci20-audio board:audio-ci20: Failed to request mute GPIO: -16
- [ 16.700000] gpio-174 (Mic Switch Enable): gpiod_request: status -16
- [ 16.700000] ingenic-ci20-audio board:audio-ci20: Failed to request mic switch enable GPIO: -16
- [ 16.700000] ingenic-ci20-audio board:audio-ci20: ASoC: CODEC DAI jz4780-hifi not registered
- [ 16.700000] ingenic-ci20-audio board:audio-ci20: snd_soc_register_card() failed:-517
- [ 16.700000] platform board:audio-ci20: Driver ingenic-ci20-audio requests probe deferral
- [ 16.700000] platform board:audio-ci20: Added to deferred list
- [ 16.764000] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 16.764000] mmc0: new SD card at address a139
- [ 16.764000] device: 'mmc0:a139': device_add
- [ 16.764000] bus: 'mmc': add device mmc0:a139
- [ 16.768000] bus: 'mmc': driver_probe_device: matched device mmc0:a139 with driver mmcblk
- [ 16.768000] bus: 'mmc': really_probe: probing driver mmcblk with device mmc0:a139
- [ 16.768000] mmcblk mmc0:a139: no of_node; not parsing pinctrl DT
- [ 16.768000] mmcblk mmc0:a139: no default pinctrl state
- [ 16.768000] mmcblk0: mmc0:a139 SD032 29.6 MiB
- [ 16.768000] device: '179:0': device_add
- [ 16.768000] device: 'mmcblk0': device_add
- [ 16.768000] mmcblk0: p1
- [ 16.768000] device: 'mmcblk0p1': device_add
- [ 16.776000] driver: 'mmcblk': driver_bound: bound to device 'mmc0:a139'
- [ 16.776000] bus: 'mmc': really_probe: bound device mmc0:a139 to driver mmcblk
- [ 16.784000] platform board:audio-ci20: Retrying from deferred list
- [ 16.784000] bus: 'platform': driver_probe_device: matched device board:audio-ci20 with driver ingenic-ci20-audio
- [ 16.784000] bus: 'platform': really_probe: probing driver ingenic-ci20-audio with device board:audio-ci20
- [ 16.784000] ingenic-ci20-audio board:audio-ci20: no default pinctrl state
- [ 16.784000] gpio-109 (Headphone Mute): gpiod_request: status -16
- [ 16.784000] ingenic-ci20-audio board:audio-ci20: Failed to request mute GPIO: -16
- [ 16.784000] gpio-174 (Mic Switch Enable): gpiod_request: status -16
- [ 16.784000] ingenic-ci20-audio board:audio-ci20: Failed to request mic switch enable GPIO: -16
- [ 16.784000] ingenic-ci20-audio board:audio-ci20: ASoC: CODEC DAI jz4780-hifi not registered
- [ 16.784000] ingenic-ci20-audio board:audio-ci20: snd_soc_register_card() failed:-517
- [ 16.784000] platform board:audio-ci20: Driver ingenic-ci20-audio requests probe deferral
- [ 16.784000] platform board:audio-ci20: Added to deferred list
- [ 16.972000] nf_conntrack version 0.5.0 (16003 buckets, 64012 max)
- [ 17.004000] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 17.012000] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 17.020000] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 17.032000] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 17.040000] xt_time: kernel timezone is -0000
- [ 17.056000] device class 'ieee80211': registering
- [ 17.064000] Registering platform device 'regulatory.0'. Parent at platform
- [ 17.068000] device: 'regulatory.0': device_add
- [ 17.072000] bus: 'platform': add device regulatory.0
- [ 17.080000] cfg80211: Calling CRDA to update world regulatory domain
- [ 17.084000] cfg80211: World regulatory domain updated:
- [ 17.092000] cfg80211: DFS Master region: unset
- [ 17.096000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 17.104000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 17.112000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 17.120000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 17.128000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 17.136000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
- [ 17.148000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
- [ 17.156000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 17.164000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 17.172000] dwc2: exports duplicate symbol dwc2_handle_common_intr (owned by kernel)
- [ 17.192000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 17.244000] bus: 'usb': add driver rt73usb
- [ 17.248000] usbcore: registered new interface driver rt73usb
- [ 17.268000] bus: 'platform': add driver brcmfmac_sdio
- [ 17.272000] bus: 'platform': remove driver brcmfmac_sdio
- [ 17.280000] driver: 'brcmfmac_sdio': driver_release
- [ 17.284000] bus: 'sdio': add driver brcmfmac_sdio
- [ 17.288000] bus: 'usb': add driver brcmfmac
- [ 17.292000] dwc2: exports duplicate symbol dwc2_handle_common_intr (owned by kernel)
- [ 17.292000] usbcore: registered new interface driver brcmfmac
- [ 17.316000] mmc1: new SDIO card at address 0001
- [ 17.320000] device: 'mmc1:0001': device_add
- [ 17.324000] bus: 'mmc': add device mmc1:0001
- [ 17.328000] dwc2: exports duplicate symbol dwc2_handle_common_intr (owned by kernel)
- [ 17.328000] bus: 'mmc': driver_probe_device: matched device mmc1:0001 with driver mmcblk
- [ 17.328000] bus: 'mmc': really_probe: probing driver mmcblk with device mmc1:0001
- [ 17.328000] mmcblk mmc1:0001: no of_node; not parsing pinctrl DT
- [ 17.328000] mmcblk mmc1:0001: no default pinctrl state
- [ 17.328000] mmcblk: probe of mmc1:0001 rejects match -19
- [ 17.328000] device: 'mmc1:0001:1': device_add
- [ 17.328000] bus: 'sdio': add device mmc1:0001:1
- [ 17.328000] bus: 'sdio': driver_probe_device: matched device mmc1:0001:1 with driver brcmfmac_sdio
- [ 17.328000] bus: 'sdio': really_probe: probing driver brcmfmac_sdio with device mmc1:0001:1
- [ 17.328000] brcmfmac_sdio mmc1:0001:1: no of_node; not parsing pinctrl DT
- [ 17.328000] brcmfmac_sdio mmc1:0001:1: no default pinctrl state
- [ 17.344000] driver: 'brcmfmac_sdio': driver_bound: bound to device 'mmc1:0001:1'
- [ 17.344000] bus: 'sdio': really_probe: bound device mmc1:0001:1 to driver brcmfmac_sdio
- [ 17.344000] device: 'mmc1:0001:2': device_add
- [ 17.344000] bus: 'sdio': add device mmc1:0001:2
- [ 17.344000] bus: 'sdio': driver_probe_device: matched device mmc1:0001:2 with driver brcmfmac_sdio
- [ 17.344000] bus: 'sdio': really_probe: probing driver brcmfmac_sdio with device mmc1:0001:2
- [ 17.344000] brcmfmac_sdio mmc1:0001:2: no of_node; not parsing pinctrl DT
- [ 17.344000] brcmfmac_sdio mmc1:0001:2: no default pinctrl state
- [ 17.344000] platform board:audio-ci20: Retrying from deferred list
- [ 17.344000] bus: 'platform': driver_probe_device: matched device board:audio-ci20 with driver ingenic-ci20-audio
- [ 17.344000] bus: 'platform': really_probe: probing driver ingenic-ci20-audio with device board:audio-ci20
- [ 17.344000] ingenic-ci20-audio board:audio-ci20: no default pinctrl state
- [ 17.344000] gpio-109 (Headphone Mute): gpiod_request: status -16
- [ 17.344000] ingenic-ci20-audio board:audio-ci20: Failed to request mute GPIO: -16
- [ 17.344000] gpio-174 (Mic Switch Enable): gpiod_request: status -16
- [ 17.344000] ingenic-ci20-audio board:audio-ci20: Failed to request mic switch enable GPIO: -16
- [ 17.344000] ingenic-ci20-audio board:audio-ci20: ASoC: CODEC DAI jz4780-hifi not registered
- [ 17.344000] ingenic-ci20-audio board:audio-ci20: snd_soc_register_card() failed:-517
- [ 17.344000] platform board:audio-ci20: Driver ingenic-ci20-audio requests probe deferral
- [ 17.344000] platform board:audio-ci20: Added to deferred list
- [ 17.440000] brcmfmac: F1 signature read @0x18000000=0x16044330
- [ 17.576000] driver: 'brcmfmac_sdio': driver_bound: bound to device 'mmc1:0001:2'
- [ 17.584000] bus: 'sdio': really_probe: bound device mmc1:0001:2 to driver brcmfmac_sdio
- [ 17.592000] __allocate_fw_buf: fw-brcm/brcmfmac4330-sdio.bin buf=8c9e7e00
- [ 17.596000] platform board:audio-ci20: Retrying from deferred list
- [ 17.604000] bus: 'platform': driver_probe_device: matched device board:audio-ci20 with driver ingenic-ci20-audio
- [ 17.612000] bus: 'platform': really_probe: probing driver ingenic-ci20-audio with device board:audio-ci20
- [ 17.624000] ingenic-ci20-audio board:audio-ci20: no default pinctrl state
- [ 17.632000] gpio-109 (Headphone Mute): gpiod_request: status -16
- [ 17.636000] ingenic-ci20-audio board:audio-ci20: Failed to request mute GPIO: -16
- [ 17.644000] gpio-174 (Mic Switch Enable): gpiod_request: status -16
- [ 17.648000] ingenic-ci20-audio board:audio-ci20: Failed to request mic switch enable GPIO: -16
- [ 17.660000] ingenic-ci20-audio board:audio-ci20: ASoC: CODEC DAI jz4780-hifi not registered
- [ 17.668000] ingenic-ci20-audio board:audio-ci20: snd_soc_register_card() failed:-517
- [ 17.676000] platform board:audio-ci20: Driver ingenic-ci20-audio requests probe deferral
- [ 17.684000] platform board:audio-ci20: Added to deferred list
- [ 17.704000] brcmfmac_sdio mmc1:0001:1: firmware: direct-loading firmware brcm/brcmfmac4330-sdio.bin
- [ 17.708000] fw_set_page_data: fw-brcm/brcmfmac4330-sdio.bin buf=8c9e7e00 data=c0635000 size=239952
- [ 17.720000] __allocate_fw_buf: fw-brcm/brcmfmac4330-sdio.txt buf=8c1d0300
- [ 17.728000] brcmfmac_sdio mmc1:0001:1: firmware: direct-loading firmware brcm/brcmfmac4330-sdio.txt
- [ 17.736000] fw_set_page_data: fw-brcm/brcmfmac4330-sdio.txt buf=8c1d0300 data=c0671000 size=762
- [ 17.744000] __fw_free_buf: fw-brcm/brcmfmac4330-sdio.txt buf=8c1d0300 data=c0671000 size=762
- [ 17.972000] __fw_free_buf: fw-brcm/brcmfmac4330-sdio.bin buf=8c9e7e00 data=c0635000 size=239952
- [ 18.128000] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: May 9 2012 23:14:16 version 5.90.195.26.2 FWID 01-1229e594
- [ 18.196000] device: 'phy0': device_add
- [ 18.208000] device: 'wlan0': device_add
- [ 20.324000] dm9000 16000000.dm9000 eth0: link down
- [ 20.344000] dm9000 16000000.dm9000 eth0: link down
- procd: - init complete -
- [ 20.964000] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
- [ 20.968000] brcmfmac: brcmf_add_if: ignore IF event
- [ 21.136000] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
- [ 21.144000] brcmfmac: brcmf_add_if: ignore IF event
- [ 31.404000] usb 2-1: new high-speed USB device number 2 using jz4780-ehci
- [ 31.548000] usb 2-1: device descriptor read/64, error -71
- [ 31.792000] usb 2-1: device descriptor read/64, error -71
- [ 32.012000] usb 2-1: new high-speed USB device number 3 using jz4780-ehci
- [ 32.152000] usb 2-1: device descriptor read/64, error -71
- [ 32.396000] usb 2-1: device descriptor read/64, error -71
- [ 32.616000] usb 2-1: new high-speed USB device number 4 using jz4780-ehci
- [ 33.044000] usb 2-1: device not accepting address 4, error -71
- [ 33.160000] usb 2-1: new high-speed USB device number 5 using jz4780-ehci
- [ 33.588000] usb 2-1: device not accepting address 5, error -71
- [ 33.592000] usb usb2-port1: unable to enumerate USB device
- BusyBox v1.22.1 (2014-12-09 14:45:57 CET) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- _______ ________ __
- | |.-----.-----.-----.| | | |.----.| |_
- | - || _ | -__| || | | || _|| _|
- |_______|| __|_____|__|__||________||__| |____|
- |__| W I R E L E S S F R E E D O M
- -----------------------------------------------------
- CHAOS CALMER (Bleeding Edge, r43589)
- -----------------------------------------------------
- * 1 1/2 oz Gin Shake with a glassful
- * 1/4 oz Triple Sec of broken ice and pour
- * 3/4 oz Lime Juice unstrained into a goblet.
- * 1 1/2 oz Orange Juice
- * 1 tsp. Grenadine Syrup
- -----------------------------------------------------
- root@CI20:/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement