API tools faq
paste
Guest User

2250 firmware since Comcast digitalization

a guest
Jun 8th, 2011
78
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 29.95 KB | None | 0 0
raw download clone embed print report
  1. dmesg output:
  2.  
  3. [ 1.976678] Magic number: 15:526:990
  4. [ 1.976770] rtc_cmos 00:05: setting system clock to 2011-06-08 14:57:34 UTC (1307545054)
  5. [ 1.976821] Initalizing network drop monitor service
  6. [ 1.997243] ata1.00: configured for UDMA/33
  7. [ 1.998071] scsi 0:0:0:0: CD-ROM TSSTcorp CDRW/DVD TSH492B TB04 PQ: 0 ANSI: 5
  8. [ 2.000265] sr0: scsi3-mmc drive: 5x/48x writer cd/rw xa/form2 cdda tray
  9. [ 2.000270] Uniform CD-ROM driver Revision: 3.20
  10. [ 2.000446] sr 0:0:0:0: Attached scsi CD-ROM sr0
  11. [ 2.000551] sr 0:0:0:0: Attached scsi generic sg0 type 5
  12. [ 2.115618] ata3.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
  13. [ 2.115624] ata3.00: 1953525168 sectors, multi 8: LBA48 NCQ (depth 0/32)
  14. [ 2.118340] ata3.00: configured for UDMA/133
  15. [ 2.118499] scsi 2:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5
  16. [ 2.118743] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  17. [ 2.118798] sd 2:0:0:0: Attached scsi generic sg1 type 0
  18. [ 2.118914] sd 2:0:0:0: [sda] Write Protect is off
  19. [ 2.118921] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
  20. [ 2.118996] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  21. [ 2.119441] sda: sda1 sda2
  22. [ 2.126878] sd 2:0:0:0: [sda] Attached SCSI disk
  23. [ 6.186097] Freeing unused kernel memory: 544k freed
  24. [ 6.186526] Write protecting the kernel text: 3772k
  25. [ 6.186613] Write protecting the kernel read-only data: 1836k
  26. [ 6.211635] dracut: dracut-006-6.fc14
  27. [ 6.221998] dracut: rd_NO_LUKS: removing cryptoluks activation
  28. [ 6.235285] udev[80]: starting version 161
  29. [ 6.345596] [drm] Initialized drm 1.1.0 20060810
  30. [ 6.381234] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  31. [ 6.381243] i915 0000:00:02.0: setting latency timer to 64
  32. [ 6.410431] [drm] set up 7M of stolen space
  33. [ 6.411035] [drm] initialized overlay support
  34. [ 6.532161] fbcon: inteldrmfb (fb0) is primary device
  35. [ 6.599709] Console: switching to colour frame buffer device 128x48
  36. [ 6.603260] fb0: inteldrmfb frame buffer device
  37. [ 6.603263] drm: registered panic notifier
  38. [ 6.603269] Slow work thread pool: Starting up
  39. [ 6.603382] Slow work thread pool: Ready
  40. [ 6.603399] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
  41. [ 6.611809] dracut: Starting plymouth daemon
  42. [ 6.768793] dracut: rd_NO_DM: removing DM RAID activation
  43. [ 6.775155] dracut: rd_NO_MD: removing MD RAID activation
  44. [ 7.188268] dracut: Scanning devices sda2 for LVM logical volumes vg_optiplex280mb/lv_root vg_optiplex280mb/lv_swap
  45. [ 7.207648] dracut: inactive '/dev/vg_optiplex280mb/lv_root' [50.00 GiB] inherit
  46. [ 7.207900] dracut: inactive '/dev/vg_optiplex280mb/lv_swap' [3.94 GiB] inherit
  47. [ 7.208056] dracut: inactive '/dev/vg_optiplex280mb/lv_home' [877.06 GiB] inherit
  48. [ 7.510540] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
  49. [ 7.536436] dracut: Mounted root filesystem /dev/mapper/vg_optiplex280mb-lv_root
  50. [ 7.629472] dracut: Loading SELinux policy
  51. [ 7.858103] SELinux: Disabled at runtime.
  52. [ 7.858159] SELinux: Unregistering netfilter hooks
  53. [ 7.860039] type=1404 audit(1307545060.382:2): selinux=0 auid=4294967295 ses=4294967295
  54. [ 7.889081] dracut: /sbin/load_policy: Can't load policy: No such file or directory
  55. [ 7.978462] dracut: Switching root
  56. [ 8.646740] readahead-collector: starting
  57. [ 9.283063] udev[368]: starting version 161
  58. [ 9.755830] microcode: CPU0 sig=0xf41, pf=0x10, revision=0x9
  59. [ 9.755853] microcode: CPU1 sig=0xf41, pf=0x10, revision=0x9
  60. [ 9.755955] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
  61. [ 10.205461] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
  62. [ 10.848370] intel_rng: Firmware space is locked read-only. If you can't or
  63. [ 10.848374] intel_rng: don't want to disable this in firmware setup, and if
  64. [ 10.848377] intel_rng: you are certain that your system has a functional
  65. [ 10.848380] intel_rng: RNG, try using the 'no_fwh_detect' option.
  66. [ 11.080844] iTCO_vendor_support: vendor-support=0
  67. [ 11.093192] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  68. [ 11.095009] microcode: CPU0 updated to revision 0x17, date = 2005-04-22
  69. [ 11.097131] microcode: CPU1 updated to revision 0x17, date = 2005-04-22
  70. [ 11.164949] Linux video capture interface: v2.00
  71. [ 11.199544] tg3.c:v3.110 (April 9, 2010)
  72. [ 11.199581] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  73. [ 11.199597] tg3 0000:02:00.0: setting latency timer to 64
  74. [ 11.209886] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:11:43:13:22:44
  75. [ 11.209895] tg3 0000:02:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
  76. [ 11.209903] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
  77. [ 11.209909] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
  78. [ 11.282399] parport_pc 00:07: reported by Plug and Play ACPI
  79. [ 11.282467] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
  80. [ 11.326447] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
  81. [ 11.327571] iTCO_wdt: unable to reset NO_REBOOT flag, platform may have disabled it
  82. [ 11.380282] ppdev: user-space parallel port driver
  83. [ 11.535970] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  84. [ 11.536159] Intel ICH 0000:00:1e.2: setting latency timer to 64
  85. [ 11.665630] saa7164 driver loaded
  86. [ 11.665739] saa7164 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  87. [ 11.667870] CORE saa7164[0]: subsystem: 0070:8851, board: Hauppauge WinTV-HVR2250 [card=7,autodetected]
  88. [ 11.667881] saa7164[0]/0: found at 0000:03:00.0, rev: 129, irq: 17, latency: 0, mmio: 0xdf400000
  89. [ 11.667889] saa7164 0000:03:00.0: setting latency timer to 64
  90. [ 11.732846] ivtv: Start initialization, version 1.4.2
  91. [ 11.732936] ivtv0: Initializing card 0
  92. [ 11.732943] ivtv0: Autodetected Hauppauge card (cx23416 based)
  93. [ 11.733141] ivtv 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  94. [ 11.778146] saa7164_downloadfirmware() no first image
  95. [ 11.778161] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw)
  96. [ 11.791001] tveeprom 2-0050: Hauppauge model 26552, rev F0A3, serial# 8919441
  97. [ 11.791031] tveeprom 2-0050: tuner model is TCL MFNM05-4 (idx 103, type 43)
  98. [ 11.791039] tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
  99. [ 11.791046] tveeprom 2-0050: audio processor is CX25843 (idx 37)
  100. [ 11.791053] tveeprom 2-0050: decoder processor is CX25843 (idx 30)
  101. [ 11.791059] tveeprom 2-0050: has radio
  102. [ 11.791064] ivtv0: Autodetected Hauppauge WinTV PVR-150
  103. [ 11.825594] cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0)
  104. [ 11.890462] saa7164_downloadfirmware() firmware read 4019072 bytes.
  105. [ 11.890469] saa7164_downloadfirmware() firmware loaded.
  106. [ 11.890473] Firmware file header part 1:
  107. [ 11.890478] .FirmwareSize = 0x0
  108. [ 11.890481] .BSLSize = 0x0
  109. [ 11.890485] .Reserved = 0x3d538
  110. [ 11.890488] .Version = 0x3
  111. [ 11.890492] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072
  112. [ 11.890501] saa7164_downloadfirmware() FirmwareSize = 0x1fd6
  113. [ 11.890506] saa7164_downloadfirmware() BSLSize = 0x0
  114. [ 11.890510] saa7164_downloadfirmware() Reserved = 0x0
  115. [ 11.890514] saa7164_downloadfirmware() Version = 0x1661c00
  116. [ 11.952020] intel8x0_measure_ac97_clock: measured 50216 usecs (2420 samples)
  117. [ 11.952025] intel8x0: clocking to 48000
  118. [ 11.952713] audit: name_count maxed, losing inode data: dev=00:05, inode=8307
  119. [ 12.021407] tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
  120. [ 12.062857] tda9887 2-0043: creating new instance
  121. [ 12.062865] tda9887 2-0043: tda988[5/6/7] found
  122. [ 12.069421] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
  123. [ 12.100489] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
  124. [ 12.151015] tuner-simple 2-0061: creating new instance
  125. [ 12.151025] tuner-simple 2-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
  126. [ 12.154958] ivtv0: Registered device video0 for encoder MPG (4096 kB)
  127. [ 12.155866] ivtv0: Registered device video32 for encoder YUV (2048 kB)
  128. [ 12.156717] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
  129. [ 12.157620] ivtv0: Registered device video24 for encoder PCM (320 kB)
  130. [ 12.158544] ivtv0: Registered device radio0 for encoder radio
  131. [ 12.158553] ivtv0: Initialized card: Hauppauge WinTV PVR-150
  132. [ 12.158632] ivtv1: Initializing card 1
  133. [ 12.158639] ivtv1: Autodetected Hauppauge card (cx23416 based)
  134. [ 12.159736] ivtv 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  135. [ 12.219824] tveeprom 3-0050: Hauppauge model 26552, rev F1A3, serial# 10474893
  136. [ 12.219834] tveeprom 3-0050: tuner model is TCL MFNM05-4 (idx 103, type 43)
  137. [ 12.219842] tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
  138. [ 12.219847] tveeprom 3-0050: audio processor is CX25843 (idx 37)
  139. [ 12.219853] tveeprom 3-0050: decoder processor is CX25843 (idx 30)
  140. [ 12.219858] tveeprom 3-0050: has radio
  141. [ 12.219863] ivtv1: Autodetected Hauppauge WinTV PVR-150
  142. [ 12.227832] cx25840 3-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #1)
  143. [ 12.260495] tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #1)
  144. [ 12.260617] tda9887 3-0043: creating new instance
  145. [ 12.260621] tda9887 3-0043: tda988[5/6/7] found
  146. [ 12.265290] tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1)
  147. [ 12.268945] wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1)
  148. [ 12.284077] tuner-simple 3-0061: creating new instance
  149. [ 12.284083] tuner-simple 3-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
  150. [ 12.286686] ivtv1: Registered device video1 for encoder MPG (4096 kB)
  151. [ 12.286724] audit: name_count maxed, losing inode data: dev=00:05, inode=8419
  152. [ 12.286776] ivtv1: Registered device video33 for encoder YUV (2048 kB)
  153. [ 12.286807] audit: name_count maxed, losing inode data: dev=00:05, inode=4
  154. [ 12.286820] audit: name_count maxed, losing inode data: dev=00:05, inode=4
  155. [ 12.286866] ivtv1: Registered device vbi1 for encoder VBI (1024 kB)
  156. [ 12.286896] audit: name_count maxed, losing inode data: dev=00:05, inode=4
  157. [ 12.286909] audit: name_count maxed, losing inode data: dev=00:05, inode=4
  158. [ 12.286955] ivtv1: Registered device video25 for encoder PCM (320 kB)
  159. [ 12.286985] audit: name_count maxed, losing inode data: dev=00:05, inode=4
  160. [ 12.286999] audit: name_count maxed, losing inode data: dev=00:05, inode=4
  161. [ 12.287056] ivtv1: Registered device radio1 for encoder radio
  162. [ 12.287063] ivtv1: Initialized card: Hauppauge WinTV PVR-150
  163. [ 12.287104] ivtv: End initialization
  164. [ 12.842078] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
  165. [ 12.929338] ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
  166. [ 13.042174] ivtv0: Encoder revision: 0x02060039
  167. [ 13.129174] ivtv1: Encoder revision: 0x02060039
  168. [ 16.616210] cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
  169. [ 16.779740] cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
  170. [ 18.589019] saa7164_downloadimage() Image downloaded, booting...
  171. [ 18.690019] saa7164_downloadimage() Image booted successfully.
  172. [ 18.690037] starting firmware download(2)
  173. [ 21.098022] saa7164_downloadimage() Image downloaded, booting...
  174. [ 23.320030] saa7164_downloadimage() Image booted successfully.
  175. [ 23.320048] firmware download complete.
  176. [ 23.365894] tveeprom 4-0000: Hauppauge model 88061, rev C4F2, serial# 7355566
  177. [ 23.365900] tveeprom 4-0000: MAC address is 00:0d:fe:70:3c:ae
  178. [ 23.365905] tveeprom 4-0000: tuner model is NXP 18271C2_716x (idx 152, type 4)
  179. [ 23.365910] tveeprom 4-0000: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
  180. [ 23.365914] tveeprom 4-0000: audio processor is SAA7164 (idx 43)
  181. [ 23.365918] tveeprom 4-0000: decoder processor is SAA7164 (idx 40)
  182. [ 23.365921] tveeprom 4-0000: has radio, has IR receiver, has no IR transmitter
  183. [ 23.365925] saa7164[0]: Hauppauge eeprom: model=88061
  184. [ 24.182880] tda18271 5-0060: creating new instance
  185. [ 24.187530] TDA18271HD/C2 detected @ 5-0060
  186. [ 24.392059] DVB: registering new adapter (saa7164)
  187. [ 24.392067] DVB: registering adapter 0 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
  188. [ 24.676733] tda18271 6-0060: creating new instance
  189. [ 24.681545] TDA18271HD/C2 detected @ 6-0060
  190. [ 24.887462] tda18271: performing RF tracking filter calibration
  191. [ 27.520292] tda18271: RF tracking filter calibration complete
  192. [ 27.521406] DVB: registering new adapter (saa7164)
  193. [ 27.521413] DVB: registering adapter 1 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
  194. [ 27.521490] audit: name_count maxed, losing inode data: dev=00:05, inode=8521
  195. [ 27.521496] audit: name_count maxed, losing inode data: dev=00:05, inode=8527
  196. [ 27.521504] audit: name_count maxed, losing inode data: dev=00:05, inode=8527
  197. [ 27.521883] audit: name_count maxed, losing inode data: dev=00:05, inode=8527
  198. [ 27.521893] audit: name_count maxed, losing inode data: dev=00:05, inode=8527
  199. [ 27.521965] audit: name_count maxed, losing inode data: dev=00:05, inode=8527
  200. [ 27.521986] audit: name_count maxed, losing inode data: dev=00:05, inode=8527
  201. [ 27.522075] audit: name_count maxed, losing inode data: dev=00:05, inode=8527
  202. [ 27.522088] audit: name_count maxed, losing inode data: dev=00:05, inode=8527
  203. [ 27.522192] audit: name_count maxed, losing inode data: dev=00:05, inode=4
  204. [ 27.522206] audit: name_count maxed, losing inode data: dev=00:05, inode=4
  205. [ 27.522261] saa7164[0]: registered device video2 [mpeg]
  206. [ 27.752661] audit: name_count maxed, losing inode data: dev=00:05, inode=4
  207. [ 27.752674] audit: name_count maxed, losing inode data: dev=00:05, inode=4
  208. [ 27.752718] saa7164[0]: registered device video3 [mpeg]
  209. [ 27.963707] audit: name_count maxed, losing inode data: dev=00:05, inode=4
  210. [ 27.963720] audit: name_count maxed, losing inode data: dev=00:05, inode=4
  211. [ 27.963763] saa7164[0]: registered device vbi2 [vbi]
  212. [ 27.963796] audit: name_count maxed, losing inode data: dev=00:05, inode=4
  213. [ 27.963809] audit: name_count maxed, losing inode data: dev=00:05, inode=4
  214. [ 27.963866] saa7164[0]: registered device vbi3 [vbi]
  215. [ 29.104340] EXT4-fs (dm-0): re-mounted. Opts: (null)
  216. [ 29.350444] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  217. [ 29.425726] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
  218. [ 29.893060] Adding 4128764k swap on /dev/mapper/vg_optiplex280mb-lv_swap. Priority:-1 extents:1 across:4128764k
  219. [ 30.144014] readahead-disable-service: delaying service auditd
  220. [ 31.325917] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
  221. [ 33.800323] NET: Registered protocol family 10
  222. [ 33.802106] lo: Disabled Privacy Extensions
  223. [ 33.802318] ADDRCONF(NETDEV_UP): eth0: link is not ready
  224. [ 35.045091] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex
  225. [ 35.045097] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
  226. [ 35.045364] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  227. [ 42.979721] lirc_dev: IR Remote Control driver registered, major 61
  228. [ 43.032899] IR NEC protocol handler initialized
  229. [ 43.066108] IR RC5(x) protocol handler initialized
  230. [ 43.082514] IR RC6 protocol handler initialized
  231. [ 43.112448] IR JVC protocol handler initialized
  232. [ 43.127011] bttv: driver version 0.9.18 loaded
  233. [ 43.127019] bttv: using 8 buffers with 2080k (520 pages) each for capture
  234. [ 43.155584] IR Sony protocol handler initialized
  235. [ 43.234061] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded
  236. [ 43.238120] IR LIRC bridge handler initialized
  237. [ 43.288959] lirc_zilog: module is from the staging directory, the quality is unknown, you have been warned.
  238. [ 43.290968] lirc_zilog: Zilog/Hauppauge IR driver initializing
  239. [ 43.294189] lirc_zilog: initialization complete
  240. [ 45.074015] eth0: no IPv6 routers present
  241. [ 48.291872] tda18271: performing RF tracking filter calibration
  242. [ 51.339269] tda18271: RF tracking filter calibration complete
  243. [ 54.723530] readahead-collector: starting delayed service auditd
  244. [ 54.973238] readahead-collector: sorting
  245. [ 55.213112] readahead-collector: finished
  246. [ 123.679032] usb 2-2: new full speed USB device using uhci_hcd and address 2
  247. [ 123.836081] usb 2-2: New USB device found, idVendor=058f, idProduct=9254
  248. [ 123.836087] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  249. [ 123.836091] usb 2-2: Product: Generic USB Hub
  250. [ 123.836093] usb 2-2: Manufacturer: ALCOR
  251. [ 123.839170] hub 2-2:1.0: USB hub found
  252. [ 123.841088] hub 2-2:1.0: 4 ports detected
  253. [ 124.119114] usb 2-2.1: new low speed USB device using uhci_hcd and address 3
  254. [ 124.247117] usb 2-2.1: New USB device found, idVendor=0d62, idProduct=001d
  255. [ 124.247122] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  256. [ 124.247126] usb 2-2.1: Product: USB Combo Keyboard
  257. [ 124.247129] usb 2-2.1: Manufacturer: Darfon
  258. [ 124.265511] input: Darfon USB Combo Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input2
  259. [ 124.265718] generic-usb 0003:0D62:001D.0001: input,hidraw0: USB HID v1.00 Keyboard [Darfon USB Combo Keyboard] on usb-0000:00:1d.0-2.1/input0
  260. [ 124.297267] input: Darfon USB Combo Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.1/input/input3
  261. [ 124.297473] generic-usb 0003:0D62:001D.0002: input,hidraw1: USB HID v1.00 Device [Darfon USB Combo Keyboard] on usb-0000:00:1d.0-2.1/input1
  262. [ 124.364129] usb 2-2.2: new low speed USB device using uhci_hcd and address 4
  263. [ 124.467138] usb 2-2.2: New USB device found, idVendor=062a, idProduct=0001
  264. [ 124.467143] usb 2-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  265. [ 124.483451] input: HID 062a:0001 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.2/2-2.2:1.0/input/input4
  266. [ 124.483729] generic-usb 0003:062A:0001.0003: input,hidraw2: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:1d.0-2.2/input0
  267. [ 125.750256] usb 2-2.3: new low speed USB device using uhci_hcd and address 5
  268. [ 125.883277] usb 2-2.3: New USB device found, idVendor=10d5, idProduct=55a4
  269. [ 125.883286] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  270. [ 125.883292] usb 2-2.3: Product: 4 Port KVMSwicther
  271. [ 125.883297] usb 2-2.3: Manufacturer: No brand
  272. [ 125.883301] usb 2-2.3: SerialNumber: 14²
  273. [ 125.923568] input: No brand 4 Port KVMSwicther as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input5
  274. [ 125.923821] generic-usb 0003:10D5:55A4.0004: input,hidraw3: USB HID v1.10 Keyboard [No brand 4 Port KVMSwicther] on usb-0000:00:1d.0-2.3/input0
  275. [ 125.929408] usbhid 2-2.3:1.1: couldn't find an input interrupt endpoint
  276. [ 132.045937] fuse init (API version 7.14)
  277. [ 135.204066] usb 2-2: USB disconnect, address 2
  278. [ 135.204073] usb 2-2.1: USB disconnect, address 3
  279. [ 135.219713] usb 2-2.2: USB disconnect, address 4
  280. [ 135.227722] usb 2-2.3: USB disconnect, address 5
  281. [ 734.865788] TCP lp registered
  282. [ 1890.903024] usb 2-2: new full speed USB device using uhci_hcd and address 6
  283. [ 1891.063002] usb 2-2: New USB device found, idVendor=058f, idProduct=9254
  284. [ 1891.063022] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  285. [ 1891.063031] usb 2-2: Product: Generic USB Hub
  286. [ 1891.063037] usb 2-2: Manufacturer: ALCOR
  287. [ 1891.066103] hub 2-2:1.0: USB hub found
  288. [ 1891.068009] hub 2-2:1.0: 4 ports detected
  289. [ 1891.346972] usb 2-2.1: new low speed USB device using uhci_hcd and address 7
  290. [ 1891.474955] usb 2-2.1: New USB device found, idVendor=0d62, idProduct=001d
  291. [ 1891.474962] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  292. [ 1891.474966] usb 2-2.1: Product: USB Combo Keyboard
  293. [ 1891.474969] usb 2-2.1: Manufacturer: Darfon
  294. [ 1891.493364] input: Darfon USB Combo Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input6
  295. [ 1891.493581] generic-usb 0003:0D62:001D.0005: input,hidraw0: USB HID v1.00 Keyboard [Darfon USB Combo Keyboard] on usb-0000:00:1d.0-2.1/input0
  296. [ 1891.525121] input: Darfon USB Combo Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.1/input/input7
  297. [ 1891.525419] generic-usb 0003:0D62:001D.0006: input,hidraw1: USB HID v1.00 Device [Darfon USB Combo Keyboard] on usb-0000:00:1d.0-2.1/input1
  298. [ 1891.591947] usb 2-2.2: new low speed USB device using uhci_hcd and address 8
  299. [ 1891.695934] usb 2-2.2: New USB device found, idVendor=062a, idProduct=0001
  300. [ 1891.695940] usb 2-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  301. [ 1891.712262] input: HID 062a:0001 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.2/2-2.2:1.0/input/input8
  302. [ 1891.712519] generic-usb 0003:062A:0001.0007: input,hidraw2: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:1d.0-2.2/input0
  303. [ 1892.915803] usb 2-2.3: new low speed USB device using uhci_hcd and address 9
  304. [ 1893.047792] usb 2-2.3: New USB device found, idVendor=10d5, idProduct=55a4
  305. [ 1893.047798] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  306. [ 1893.047802] usb 2-2.3: Product: 4 Port KVMSwicther
  307. [ 1893.047806] usb 2-2.3: Manufacturer: No brand
  308. [ 1893.047808] usb 2-2.3: SerialNumber: 14²
  309. [ 1893.087990] input: No brand 4 Port KVMSwicther as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input9
  310. [ 1893.088253] generic-usb 0003:10D5:55A4.0008: input,hidraw3: USB HID v1.10 Keyboard [No brand 4 Port KVMSwicther] on usb-0000:00:1d.0-2.3/input0
  311. [ 1893.093856] usbhid 2-2.3:1.1: couldn't find an input interrupt endpoint
  312. [ 1913.500063] usb 2-2: USB disconnect, address 6
  313. [ 1913.500068] usb 2-2.1: USB disconnect, address 7
  314. [ 1913.510669] usb 2-2.2: USB disconnect, address 8
  315. [ 1913.516634] usb 2-2.3: USB disconnect, address 9
  316. [ 1918.599025] usb 2-2: new full speed USB device using uhci_hcd and address 10
  317. [ 1918.758011] usb 2-2: New USB device found, idVendor=058f, idProduct=9254
  318. [ 1918.758017] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  319. [ 1918.758022] usb 2-2: Product: Generic USB Hub
  320. [ 1918.758025] usb 2-2: Manufacturer: ALCOR
  321. [ 1918.761103] hub 2-2:1.0: USB hub found
  322. [ 1918.763013] hub 2-2:1.0: 4 ports detected
  323. [ 1919.042981] usb 2-2.1: new low speed USB device using uhci_hcd and address 11
  324. [ 1919.169964] usb 2-2.1: New USB device found, idVendor=0d62, idProduct=001d
  325. [ 1919.169970] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  326. [ 1919.169974] usb 2-2.1: Product: USB Combo Keyboard
  327. [ 1919.169977] usb 2-2.1: Manufacturer: Darfon
  328. [ 1919.188377] input: Darfon USB Combo Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input10
  329. [ 1919.188592] generic-usb 0003:0D62:001D.0009: input,hidraw0: USB HID v1.00 Keyboard [Darfon USB Combo Keyboard] on usb-0000:00:1d.0-2.1/input0
  330. [ 1919.219124] input: Darfon USB Combo Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.1/input/input11
  331. [ 1919.219409] generic-usb 0003:0D62:001D.000A: input,hidraw1: USB HID v1.00 Device [Darfon USB Combo Keyboard] on usb-0000:00:1d.0-2.1/input1
  332. [ 1919.285955] usb 2-2.2: new low speed USB device using uhci_hcd and address 12
  333. [ 1919.390942] usb 2-2.2: New USB device found, idVendor=062a, idProduct=0001
  334. [ 1919.390947] usb 2-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  335. [ 1919.407279] input: HID 062a:0001 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.2/2-2.2:1.0/input/input12
  336. [ 1919.407552] generic-usb 0003:062A:0001.000B: input,hidraw2: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:1d.0-2.2/input0
  337. [ 1920.611818] usb 2-2.3: new low speed USB device using uhci_hcd and address 13
  338. [ 1920.744800] usb 2-2.3: New USB device found, idVendor=10d5, idProduct=55a4
  339. [ 1920.744807] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  340. [ 1920.744811] usb 2-2.3: Product: 4 Port KVMSwicther
  341. [ 1920.744814] usb 2-2.3: Manufacturer: No brand
  342. [ 1920.744817] usb 2-2.3: SerialNumber: 14²
  343. [ 1920.784993] input: No brand 4 Port KVMSwicther as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input13
  344. [ 1920.785241] generic-usb 0003:10D5:55A4.000C: input,hidraw3: USB HID v1.10 Keyboard [No brand 4 Port KVMSwicther] on usb-0000:00:1d.0-2.3/input0
  345. [ 1920.790876] usbhid 2-2.3:1.1: couldn't find an input interrupt endpoint
  346. [ 1955.500060] usb 2-2: USB disconnect, address 10
  347. [ 1955.500066] usb 2-2.1: USB disconnect, address 11
  348. [ 1955.511512] usb 2-2.2: USB disconnect, address 12
  349. [ 1955.517589] usb 2-2.3: USB disconnect, address 13
  350. [ 1973.708026] usb 2-2: new full speed USB device using uhci_hcd and address 14
  351. [ 1973.868013] usb 2-2: New USB device found, idVendor=058f, idProduct=9254
  352. [ 1973.868019] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  353. [ 1973.868023] usb 2-2: Product: Generic USB Hub
  354. [ 1973.868026] usb 2-2: Manufacturer: ALCOR
  355. [ 1973.871107] hub 2-2:1.0: USB hub found
  356. [ 1973.873016] hub 2-2:1.0: 4 ports detected
  357. [ 1974.151987] usb 2-2.1: new low speed USB device using uhci_hcd and address 15
  358. [ 1974.279969] usb 2-2.1: New USB device found, idVendor=0d62, idProduct=001d
  359. [ 1974.279975] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  360. [ 1974.279979] usb 2-2.1: Product: USB Combo Keyboard
  361. [ 1974.279982] usb 2-2.1: Manufacturer: Darfon
  362. [ 1974.298387] input: Darfon USB Combo Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input14
  363. [ 1974.298601] generic-usb 0003:0D62:001D.000D: input,hidraw0: USB HID v1.00 Keyboard [Darfon USB Combo Keyboard] on usb-0000:00:1d.0-2.1/input0
  364. [ 1974.330126] input: Darfon USB Combo Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.1/input/input15
  365. [ 1974.330408] generic-usb 0003:0D62:001D.000E: input,hidraw1: USB HID v1.00 Device [Darfon USB Combo Keyboard] on usb-0000:00:1d.0-2.1/input1
  366. [ 1974.396964] usb 2-2.2: new low speed USB device using uhci_hcd and address 16
  367. [ 1974.501955] usb 2-2.2: New USB device found, idVendor=062a, idProduct=0001
  368. [ 1974.501960] usb 2-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  369. [ 1974.518283] input: HID 062a:0001 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.2/2-2.2:1.0/input/input16
  370. [ 1974.518543] generic-usb 0003:062A:0001.000F: input,hidraw2: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:1d.0-2.2/input0
  371. [ 1975.752844] usb 2-2.3: new low speed USB device using uhci_hcd and address 17
  372. [ 1975.885837] usb 2-2.3: New USB device found, idVendor=10d5, idProduct=55a4
  373. [ 1975.885843] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  374. [ 1975.885847] usb 2-2.3: Product: 4 Port KVMSwicther
  375. [ 1975.885851] usb 2-2.3: Manufacturer: No brand
  376. [ 1975.885854] usb 2-2.3: SerialNumber: 14²
  377. [ 1975.926047] input: No brand 4 Port KVMSwicther as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input17
  378. [ 1975.926281] generic-usb 0003:10D5:55A4.0010: input,hidraw3: USB HID v1.10 Keyboard [No brand 4 Port KVMSwicther] on usb-0000:00:1d.0-2.3/input0
  379. [ 1975.931900] usbhid 2-2.3:1.1: couldn't find an input interrupt endpoint
  380. [ 2307.250074] usb 2-2: USB disconnect, address 14
  381. [ 2307.250081] usb 2-2.1: USB disconnect, address 15
  382. [ 2307.265866] usb 2-2.2: USB disconnect, address 16
  383. [ 2307.272644] usb 2-2.3: USB disconnect, address 17
  384. [ 2671.681037] usb 2-2: new full speed USB device using uhci_hcd and address 18
  385. [ 2671.840064] usb 2-2: New USB device found, idVendor=058f, idProduct=9254
  386. [ 2671.840071] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  387. [ 2671.840075] usb 2-2: Product: Generic USB Hub
  388. [ 2671.840078] usb 2-2: Manufacturer: ALCOR
  389. [ 2671.842207] hub 2-2:1.0: USB hub found
  390. [ 2671.844064] hub 2-2:1.0: 4 ports detected
  391. [ 2672.125076] usb 2-2.1: new low speed USB device using uhci_hcd and address 19
  392. [ 2672.254078] usb 2-2.1: New USB device found, idVendor=0d62, idProduct=001d
  393. [ 2672.254084] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  394. [ 2672.254089] usb 2-2.1: Product: USB Combo Keyboard
  395. [ 2672.254092] usb 2-2.1: Manufacturer: Darfon
  396. [ 2672.272525] input: Darfon USB Combo Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input18
  397. [ 2672.272759] generic-usb 0003:0D62:001D.0011: input,hidraw0: USB HID v1.00 Keyboard [Darfon USB Combo Keyboard] on usb-0000:00:1d.0-2.1/input0
  398. [ 2672.304251] input: Darfon USB Combo Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.1/input/input19
  399. [ 2672.304548] generic-usb 0003:0D62:001D.0012: input,hidraw1: USB HID v1.00 Device [Darfon USB Combo Keyboard] on usb-0000:00:1d.0-2.1/input1
  400. [ 2672.371084] usb 2-2.2: new low speed USB device using uhci_hcd and address 20
  401. [ 2672.476099] usb 2-2.2: New USB device found, idVendor=062a, idProduct=0001
  402. [ 2672.476108] usb 2-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  403. [ 2672.492435] input: HID 062a:0001 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.2/2-2.2:1.0/input/input20
  404. [ 2672.492729] generic-usb 0003:062A:0001.0013: input,hidraw2: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:1d.0-2.2/input0
  405. [ 2673.570174] usb 2-2.3: new low speed USB device using uhci_hcd and address 21
  406. [ 2673.702129] usb 2-2.3: New USB device found, idVendor=10d5, idProduct=55a4
  407. [ 2673.702135] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  408. [ 2673.702139] usb 2-2.3: Product: 4 Port KVMSwicther
  409. [ 2673.702142] usb 2-2.3: Manufacturer: No brand
  410. [ 2673.702145] usb 2-2.3: SerialNumber: 14²
  411. [ 2673.742342] input: No brand 4 Port KVMSwicther as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input21
  412. [ 2673.742575] generic-usb 0003:10D5:55A4.0014: input,hidraw3: USB HID v1.10 Keyboard [No brand 4 Port KVMSwicther] on usb-0000:00:1d.0-2.3/input0
  413. [ 2673.748333] usbhid 2-2.3:1.1: couldn't find an input interrupt endpoint
  414. [ 4638.625219] npviewer.bin[2650]: segfault at 218 ip 0107a806 sp bfe80f58 error 6 in libflashplayer.so[dfe000+bc1000]
  415. [11494.672293] npviewer.bin[2977]: segfault at 218 ip 0107a806 sp bf8be488 error 6 in libflashplayer.so[dfe000+bc1000]
  416. [12954.987967] npviewer.bin[3649]: segfault at 0 ip 011d5d61 sp bfcc3130 error 4 in libflashplayer.so[dfe000+bc1000]
  417. [13242.750410] npviewer.bin[3851]: segfault at b73380b4 ip 011d5d53 sp bfc79530 error 4 in libflashplayer.so[dfe000+bc1000]
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!