Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.0.0-12-generic (buildd@vernadsky) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 (Ubuntu 3.0.0-12.20-generic 3.0.4)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
- [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000afff0000 (usable)
- [ 0.000000] BIOS-e820: 00000000afff0000 - 00000000afff3000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000afff3000 - 00000000b0000000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
- [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
- [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
- [ 0.000000] DMI 2.3 present.
- [ 0.000000] DMI: ASUS snc302eeh /ABN-SLI Premium, BIOS ASUS A8N-SLI Premium ACPI BIOS Revision 1009 10/21/2005
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] last_pfn = 0xafff0 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-C7FFF write-protect
- [ 0.000000] C8000-FFFFF uncachable
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
- [ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
- [ 0.000000] 2 base 00A0000000 mask FFF0000000 write-back
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] found SMP MP-table at [c00f5980] f5980
- [ 0.000000] initial memory mapped : 0 - 01c00000
- [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037400000 page 2M
- [ 0.000000] 0037400000 - 00377fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
- [ 0.000000] RAMDISK: 364de000 - 37267000
- [ 0.000000] ACPI: RSDP 000f7d30 00014 (v00 Nvidia)
- [ 0.000000] ACPI: RSDT afff3040 00034 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: FACP afff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: DSDT afff3180 06678 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
- [ 0.000000] ACPI: FACS afff0000 00040
- [ 0.000000] ACPI: SRAT afff9900 000C8 (v01 AMD HAMMER 00000001 AMD 00000001)
- [ 0.000000] ACPI: MCFG afff9a40 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: APIC afff9840 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 1927MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000377fe
- [ 0.000000] HighMem 0x000377fe -> 0x000afff0
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x000afff0
- [ 0.000000] On node 0 totalpages: 720767
- [ 0.000000] free_area_init_node: node 0, pgdat c17b11c0, node_mem_map f4ede200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 3856 pages used for memmap
- [ 0.000000] HighMem zone: 489698 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
- [ 0.000000] If you got timer trouble try acpi_use_timer_override
- [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] ACPI: IRQ14 used by override.
- [ 0.000000] ACPI: IRQ15 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at b0000000 (gap: b0000000:30000000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 12 pages/cpu @f4800000 s26240 r0 d22912 u2097152
- [ 0.000000] pcpu-alloc: s26240 r0 d22912 u2097152 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 715135
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic root=UUID=b7d16b9b-cdc8-4d96-9f31-20d92dd7fa25 ro quiet splash vt.handoff=7
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] allocated 11533824 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (000377fe:000afff0)
- [ 0.000000] Memory: 2824936k/2883520k available (5329k kernel code, 58132k reserved, 2589k data, 696k init, 1974216k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc17bc000 - 0xc186a000 ( 696 kB)
- [ 0.000000] .data : 0xc1534784 - 0xc17bbd80 (2589 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc1534784 (5329 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
- [ 0.000000] CPU 0 irqstacks, hard=f3808000 soft=f380a000
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] vt handoff: transparent VT on vt#7
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2211.371 MHz processor.
- [ 0.000000] Marking TSC unstable due to TSCs unsynchronized
- [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4422.74 BogoMIPS (lpj=8845484)
- [ 0.004014] pid_max: default: 32768 minimum: 301
- [ 0.004043] Security Framework initialized
- [ 0.004073] AppArmor: AppArmor initialized
- [ 0.004076] Yama: becoming mindful.
- [ 0.004149] Mount-cache hash table entries: 512
- [ 0.004335] Initializing cgroup subsys cpuacct
- [ 0.004343] Initializing cgroup subsys memory
- [ 0.004354] Initializing cgroup subsys devices
- [ 0.004358] Initializing cgroup subsys freezer
- [ 0.004361] Initializing cgroup subsys net_cls
- [ 0.004365] Initializing cgroup subsys blkio
- [ 0.004375] Initializing cgroup subsys perf_event
- [ 0.004411] CPU: Physical Processor ID: 0
- [ 0.004414] CPU: Processor Core ID: 0
- [ 0.004418] mce: CPU supports 5 MCE banks
- [ 0.006632] ACPI: Core revision 20110413
- [ 0.016020] ftrace: allocating 24885 entries in 49 pages
- [ 0.020121] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.020438] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
- [ 0.063149] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
- [ 0.064003] Performance Events: AMD PMU driver.
- [ 0.064003] ... version: 0
- [ 0.064003] ... bit width: 48
- [ 0.064003] ... generic registers: 4
- [ 0.064003] ... value mask: 0000ffffffffffff
- [ 0.064003] ... max period: 00007fffffffffff
- [ 0.064003] ... fixed-purpose events: 0
- [ 0.064003] ... event mask: 000000000000000f
- [ 0.064003] CPU 1 irqstacks, hard=f38ca000 soft=f38cc000
- [ 0.064003] Booting Node 0, Processors #1 Ok.
- [ 0.064003] smpboot cpu 1: start_ip = 9b000
- [ 0.008000] Initializing CPU#1
- [ 0.148142] Brought up 2 CPUs
- [ 0.148145] Total of 2 processors activated (8845.69 BogoMIPS).
- [ 0.148714] devtmpfs: initialized
- [ 0.148714] PM: Registering ACPI NVS region at afff0000 (12288 bytes)
- [ 0.150122] print_constraints: dummy:
- [ 0.150148] Time: 1:59:59 Date: 10/17/11
- [ 0.150194] NET: Registered protocol family 16
- [ 0.150233] Trying to unpack rootfs image as initramfs...
- [ 0.150348] EISA bus registered
- [ 0.150354] node 0 link 0: io port [1000, fffff]
- [ 0.150357] TOM: 00000000b0000000 aka 2816M
- [ 0.150360] node 0 link 0: mmio [e0000000, efffffff]
- [ 0.150364] node 0 link 0: mmio [feb00000, fec0ffff]
- [ 0.150367] node 0 link 0: mmio [a0000, bffff]
- [ 0.150370] node 0 link 0: mmio [b0000000, fed3ffff]
- [ 0.150373] bus: [00, ff] on node 0 link 0
- [ 0.150377] bus: 00 index 0 [io 0x0000-0xffff]
- [ 0.150379] bus: 00 index 1 [mem 0xb0000000-0xffffffff]
- [ 0.150381] bus: 00 index 2 [mem 0xfeb00000-0xfec0ffff]
- [ 0.150384] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
- [ 0.150392] ACPI: bus type pci registered
- [ 0.150456] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.150460] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.150462] PCI: Using MMCONFIG for extended config space
- [ 0.150464] PCI: Using configuration type 1 for base access
- [ 0.164073] bio: create slab <bio-0> at 0
- [ 0.165342] ACPI: EC: Look up EC in DSDT
- [ 0.170588] ACPI: Interpreter enabled
- [ 0.170592] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.170615] ACPI: Using IOAPIC for interrupt routing
- [ 0.176602] ACPI: No dock devices found.
- [ 0.176605] HEST: Table not found.
- [ 0.176609] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
- [ 0.176664] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.176767] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
- [ 0.176770] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
- [ 0.176773] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- [ 0.176776] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
- [ 0.176779] pci_root PNP0A08:00: host bridge window [mem 0xb0000000-0xfebfffff] (ignored)
- [ 0.176797] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580
- [ 0.176862] pci 0000:00:01.0: [10de:0050] type 0 class 0x000601
- [ 0.176885] HPET not enabled in BIOS. You might try hpet=force boot option
- [ 0.176897] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05
- [ 0.176905] pci 0000:00:01.1: reg 10: [io 0xdc00-0xdc1f]
- [ 0.176919] pci 0000:00:01.1: reg 20: [io 0x4c00-0x4c3f]
- [ 0.176924] pci 0000:00:01.1: reg 24: [io 0x4c40-0x4c7f]
- [ 0.176936] pci 0000:00:01.1: PME# supported from D3hot D3cold
- [ 0.176941] pci 0000:00:01.1: PME# disabled
- [ 0.176955] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03
- [ 0.176964] pci 0000:00:02.0: reg 10: [mem 0xd5003000-0xd5003fff]
- [ 0.176988] pci 0000:00:02.0: supports D1 D2
- [ 0.176991] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.176994] pci 0000:00:02.0: PME# disabled
- [ 0.177006] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03
- [ 0.177015] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfeb000ff]
- [ 0.177043] pci 0000:00:02.1: supports D1 D2
- [ 0.177045] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.177049] pci 0000:00:02.1: PME# disabled
- [ 0.177068] pci 0000:00:06.0: [10de:0053] type 0 class 0x000101
- [ 0.177086] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
- [ 0.177108] pci 0000:00:07.0: [10de:0054] type 0 class 0x000101
- [ 0.177117] pci 0000:00:07.0: reg 10: [io 0x09f0-0x09f7]
- [ 0.177123] pci 0000:00:07.0: reg 14: [io 0x0bf0-0x0bf3]
- [ 0.177128] pci 0000:00:07.0: reg 18: [io 0x0970-0x0977]
- [ 0.177134] pci 0000:00:07.0: reg 1c: [io 0x0b70-0x0b73]
- [ 0.177139] pci 0000:00:07.0: reg 20: [io 0xd800-0xd80f]
- [ 0.177145] pci 0000:00:07.0: reg 24: [mem 0xd5002000-0xd5002fff]
- [ 0.177164] pci 0000:00:08.0: [10de:0055] type 0 class 0x000101
- [ 0.177172] pci 0000:00:08.0: reg 10: [io 0x09e0-0x09e7]
- [ 0.177177] pci 0000:00:08.0: reg 14: [io 0x0be0-0x0be3]
- [ 0.177183] pci 0000:00:08.0: reg 18: [io 0x0960-0x0967]
- [ 0.177188] pci 0000:00:08.0: reg 1c: [io 0x0b60-0x0b63]
- [ 0.177194] pci 0000:00:08.0: reg 20: [io 0xc400-0xc40f]
- [ 0.177199] pci 0000:00:08.0: reg 24: [mem 0xd5001000-0xd5001fff]
- [ 0.177217] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604
- [ 0.177235] pci 0000:00:0a.0: [10de:0057] type 0 class 0x000680
- [ 0.177244] pci 0000:00:0a.0: reg 10: [mem 0xd5000000-0xd5000fff]
- [ 0.177250] pci 0000:00:0a.0: reg 14: [io 0xb000-0xb007]
- [ 0.177272] pci 0000:00:0a.0: supports D1 D2
- [ 0.177274] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.177278] pci 0000:00:0a.0: PME# disabled
- [ 0.177289] pci 0000:00:0b.0: [10de:005d] type 1 class 0x000604
- [ 0.177314] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.177318] pci 0000:00:0b.0: PME# disabled
- [ 0.177331] pci 0000:00:0c.0: [10de:005d] type 1 class 0x000604
- [ 0.177354] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.177358] pci 0000:00:0c.0: PME# disabled
- [ 0.177374] pci 0000:00:0d.0: [10de:005d] type 1 class 0x000604
- [ 0.177397] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.177400] pci 0000:00:0d.0: PME# disabled
- [ 0.177414] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604
- [ 0.177436] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.177440] pci 0000:00:0e.0: PME# disabled
- [ 0.177460] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
- [ 0.177487] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
- [ 0.177504] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
- [ 0.177521] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
- [ 0.177542] PCI: peer root bus 00 res updated from pci conf
- [ 0.177567] pci 0000:05:07.0: [1106:3038] type 0 class 0x000c03
- [ 0.177596] pci 0000:05:07.0: reg 20: [io 0x8000-0x801f]
- [ 0.177618] pci 0000:05:07.0: supports D1 D2
- [ 0.177620] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.177625] pci 0000:05:07.0: PME# disabled
- [ 0.177637] pci 0000:05:07.1: [1106:3038] type 0 class 0x000c03
- [ 0.177666] pci 0000:05:07.1: reg 20: [io 0x8400-0x841f]
- [ 0.177688] pci 0000:05:07.1: supports D1 D2
- [ 0.177690] pci 0000:05:07.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.177694] pci 0000:05:07.1: PME# disabled
- [ 0.177707] pci 0000:05:07.2: [1106:3104] type 0 class 0x000c03
- [ 0.177719] pci 0000:05:07.2: reg 10: [mem 0xd400a000-0xd400a0ff]
- [ 0.177759] pci 0000:05:07.2: supports D1 D2
- [ 0.177761] pci 0000:05:07.2: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.177765] pci 0000:05:07.2: PME# disabled
- [ 0.177784] pci 0000:05:0a.0: [1095:3114] type 0 class 0x000104
- [ 0.177795] pci 0000:05:0a.0: reg 10: [io 0x8800-0x8807]
- [ 0.177803] pci 0000:05:0a.0: reg 14: [io 0x8c00-0x8c03]
- [ 0.177810] pci 0000:05:0a.0: reg 18: [io 0x9000-0x9007]
- [ 0.177818] pci 0000:05:0a.0: reg 1c: [io 0x9400-0x9403]
- [ 0.177825] pci 0000:05:0a.0: reg 20: [io 0x9800-0x980f]
- [ 0.177833] pci 0000:05:0a.0: reg 24: [mem 0xd4009000-0xd40093ff]
- [ 0.177841] pci 0000:05:0a.0: reg 30: [mem 0x00000000-0x0007ffff pref]
- [ 0.177853] pci 0000:05:0a.0: supports D1 D2
- [ 0.177867] pci 0000:05:0b.0: [104c:8023] type 0 class 0x000c00
- [ 0.177879] pci 0000:05:0b.0: reg 10: [mem 0xd4008000-0xd40087ff]
- [ 0.177888] pci 0000:05:0b.0: reg 14: [mem 0xd4000000-0xd4003fff]
- [ 0.177925] pci 0000:05:0b.0: supports D1 D2
- [ 0.177928] pci 0000:05:0b.0: PME# supported from D0 D1 D2 D3hot
- [ 0.177932] pci 0000:05:0b.0: PME# disabled
- [ 0.177946] pci 0000:05:0c.0: [11ab:4320] type 0 class 0x000200
- [ 0.177960] pci 0000:05:0c.0: reg 10: [mem 0xd4004000-0xd4007fff]
- [ 0.177967] pci 0000:05:0c.0: reg 14: [io 0x9c00-0x9cff]
- [ 0.177994] pci 0000:05:0c.0: reg 30: [mem 0x00000000-0x0001ffff pref]
- [ 0.178009] pci 0000:05:0c.0: supports D1 D2
- [ 0.178012] pci 0000:05:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.178016] pci 0000:05:0c.0: PME# disabled
- [ 0.178037] pci 0000:00:09.0: PCI bridge to [bus 05-05] (subtractive decode)
- [ 0.178041] pci 0000:00:09.0: bridge window [io 0x8000-0x9fff]
- [ 0.178045] pci 0000:00:09.0: bridge window [mem 0xd3000000-0xd4ffffff]
- [ 0.178049] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.178053] pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode)
- [ 0.178056] pci 0000:00:09.0: bridge window [mem 0xb0000000-0xffffffff] (subtractive decode)
- [ 0.178059] pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfec0ffff] (subtractive decode)
- [ 0.178062] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.178083] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
- [ 0.178088] pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled)
- [ 0.178092] pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- [ 0.178097] pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.178117] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
- [ 0.178122] pci 0000:00:0c.0: bridge window [io 0xf000-0x0000] (disabled)
- [ 0.178125] pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- [ 0.178130] pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.178151] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
- [ 0.178155] pci 0000:00:0d.0: bridge window [io 0xf000-0x0000] (disabled)
- [ 0.178159] pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- [ 0.178163] pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.178194] pci 0000:01:00.0: [10de:0a23] type 0 class 0x000300
- [ 0.178203] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd0ffffff]
- [ 0.178213] pci 0000:01:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
- [ 0.178223] pci 0000:01:00.0: reg 1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
- [ 0.178231] pci 0000:01:00.0: reg 24: [io 0xa000-0xa07f]
- [ 0.178238] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
- [ 0.178275] pci 0000:01:00.1: [10de:0be2] type 0 class 0x000403
- [ 0.178284] pci 0000:01:00.1: reg 10: [mem 0xd2000000-0xd2003fff]
- [ 0.184029] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
- [ 0.184033] pci 0000:00:0e.0: bridge window [io 0xa000-0xafff]
- [ 0.184037] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd2ffffff]
- [ 0.184042] pci 0000:00:0e.0: bridge window [mem 0xb0000000-0xcfffffff 64bit pref]
- [ 0.184052] pci_bus 0000:00: on NUMA node 0
- [ 0.184056] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.184217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
- [ 0.184407] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.184411] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
- [ 0.184413] ACPI _OSC control for PCIe not granted, disabling ASPM
- [ 0.214198] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
- [ 0.214245] ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15)
- [ 0.214290] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
- [ 0.214334] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15)
- [ 0.214378] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [ 0.214424] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
- [ 0.214468] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [ 0.214514] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 11 *12 14 15)
- [ 0.214558] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [ 0.214603] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [ 0.214648] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 *12 14 15)
- [ 0.214701] ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 7 9 10 11 12 14 15)
- [ 0.214749] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [ 0.214800] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
- [ 0.214854] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
- [ 0.214907] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [ 0.214975] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
- [ 0.215034] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
- [ 0.215088] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
- [ 0.215143] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
- [ 0.215172] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
- [ 0.215233] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
- [ 0.215294] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
- [ 0.215355] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
- [ 0.215417] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
- [ 0.215479] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
- [ 0.215540] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
- [ 0.215601] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
- [ 0.215662] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
- [ 0.215730] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
- [ 0.215797] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
- [ 0.215862] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
- [ 0.215999] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.216002] vgaarb: loaded
- [ 0.216003] vgaarb: bridge control possible 0000:01:00.0
- [ 0.216284] SCSI subsystem initialized
- [ 0.216376] libata version 3.00 loaded.
- [ 0.216443] usbcore: registered new interface driver usbfs
- [ 0.216456] usbcore: registered new interface driver hub
- [ 0.216488] usbcore: registered new device driver usb
- [ 0.216588] PCI: Using ACPI for IRQ routing
- [ 0.221877] PCI: pci_cache_line_size set to 64 bytes
- [ 0.221896] pci 0000:00:02.1: address space collision: [mem 0xfeb00000-0xfeb000ff] conflicts with PCI Bus #00 [mem 0xfeb00000-0xfec0ffff]
- [ 0.221957] Expanded resource reserved due to conflict with PCI Bus #00
- [ 0.221960] reserve RAM buffer: 000000000009f800 - 000000000009ffff
- [ 0.221963] reserve RAM buffer: 00000000afff0000 - 00000000afffffff
- [ 0.222092] NetLabel: Initializing
- [ 0.222094] NetLabel: domain hash size = 128
- [ 0.222095] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.222109] NetLabel: unlabeled traffic allowed by default
- [ 0.230002] AppArmor: AppArmor Filesystem Enabled
- [ 0.230050] pnp: PnP ACPI init
- [ 0.230074] ACPI: bus type pnp registered
- [ 0.230207] pnp 00:00: [bus 00-ff]
- [ 0.230211] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.230214] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.230216] pnp 00:00: [io 0x0d00-0xffff window]
- [ 0.230219] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.230222] pnp 00:00: [mem 0x000c0000-0x000dffff window]
- [ 0.230225] pnp 00:00: [mem 0xb0000000-0xfebfffff window]
- [ 0.230312] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- [ 0.230364] pnp 00:01: [io 0x4000-0x407f]
- [ 0.230367] pnp 00:01: [io 0x4080-0x40ff]
- [ 0.230369] pnp 00:01: [io 0x4400-0x447f]
- [ 0.230371] pnp 00:01: [io 0x4480-0x44ff]
- [ 0.230374] pnp 00:01: [io 0x4800-0x487f]
- [ 0.230376] pnp 00:01: [io 0x4880-0x48ff]
- [ 0.230379] pnp 00:01: [mem 0xa0000000-0x9fffffff disabled]
- [ 0.230453] system 00:01: [io 0x4000-0x407f] has been reserved
- [ 0.230456] system 00:01: [io 0x4080-0x40ff] has been reserved
- [ 0.230459] system 00:01: [io 0x4400-0x447f] has been reserved
- [ 0.230462] system 00:01: [io 0x4480-0x44ff] has been reserved
- [ 0.230465] system 00:01: [io 0x4800-0x487f] has been reserved
- [ 0.230468] system 00:01: [io 0x4880-0x48ff] has been reserved
- [ 0.230472] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.230964] pnp 00:02: [io 0x0010-0x001f]
- [ 0.230967] pnp 00:02: [io 0x0022-0x003f]
- [ 0.230969] pnp 00:02: [io 0x0044-0x005f]
- [ 0.230971] pnp 00:02: [io 0x0062-0x0063]
- [ 0.230974] pnp 00:02: [io 0x0065-0x006f]
- [ 0.230976] pnp 00:02: [io 0x0074-0x007f]
- [ 0.230978] pnp 00:02: [io 0x0091-0x0093]
- [ 0.230981] pnp 00:02: [io 0x00a2-0x00bf]
- [ 0.230986] pnp 00:02: [io 0x00e0-0x00ef]
- [ 0.230988] pnp 00:02: [io 0x04d0-0x04d1]
- [ 0.230990] pnp 00:02: [io 0x0800-0x087f]
- [ 0.230993] pnp 00:02: [io 0x0290-0x0297]
- [ 0.231065] system 00:02: [io 0x04d0-0x04d1] has been reserved
- [ 0.231068] system 00:02: [io 0x0800-0x087f] has been reserved
- [ 0.231071] system 00:02: [io 0x0290-0x0297] has been reserved
- [ 0.231074] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.231086] pnp 00:03: [dma 4]
- [ 0.231089] pnp 00:03: [io 0x0000-0x000f]
- [ 0.231091] pnp 00:03: [io 0x0080-0x0090]
- [ 0.231093] pnp 00:03: [io 0x0094-0x009f]
- [ 0.231096] pnp 00:03: [io 0x00c0-0x00df]
- [ 0.231135] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.231146] pnp 00:04: [io 0x0070-0x0073]
- [ 0.231163] pnp 00:04: [irq 8]
- [ 0.231203] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.231212] pnp 00:05: [io 0x0061]
- [ 0.231262] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.231271] pnp 00:06: [io 0x00f0-0x00ff]
- [ 0.231277] pnp 00:06: [irq 13]
- [ 0.231318] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.231466] pnp 00:07: [io 0x03f0-0x03f5]
- [ 0.231469] pnp 00:07: [io 0x03f7]
- [ 0.231475] pnp 00:07: [irq 6]
- [ 0.231477] pnp 00:07: [dma 2]
- [ 0.231534] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
- [ 0.231728] pnp 00:08: [io 0x03f8-0x03ff]
- [ 0.231734] pnp 00:08: [irq 4]
- [ 0.231805] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.232253] pnp 00:09: [io 0x0378-0x037f]
- [ 0.232256] pnp 00:09: [io 0x0778-0x077b]
- [ 0.232262] pnp 00:09: [irq 7]
- [ 0.232264] pnp 00:09: [dma 3]
- [ 0.232335] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
- [ 0.232568] pnp 00:0a: [io 0x0330-0x0331]
- [ 0.232574] pnp 00:0a: [irq 10]
- [ 0.232632] pnp 00:0a: Plug and Play ACPI device, IDs PNPb006 (active)
- [ 0.232810] pnp 00:0b: [io 0x0201]
- [ 0.232859] pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (active)
- [ 0.232877] pnp 00:0c: [mem 0xe0000000-0xefffffff]
- [ 0.232941] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.232944] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.233041] pnp 00:0d: [mem 0x000f0000-0x000f3fff]
- [ 0.233043] pnp 00:0d: [mem 0x000f4000-0x000f7fff]
- [ 0.233046] pnp 00:0d: [mem 0x000f8000-0x000fbfff]
- [ 0.233048] pnp 00:0d: [mem 0x000fc000-0x000fffff]
- [ 0.233051] pnp 00:0d: [mem 0xafff0000-0xafffffff]
- [ 0.233053] pnp 00:0d: [mem 0xffff0000-0xffffffff]
- [ 0.233059] pnp 00:0d: [mem 0x00000000-0x0009ffff]
- [ 0.233062] pnp 00:0d: [mem 0x00100000-0xaffeffff]
- [ 0.233064] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
- [ 0.233067] pnp 00:0d: [mem 0xfee00000-0xfeefffff]
- [ 0.233069] pnp 00:0d: [mem 0xfefff000-0xfeffffff]
- [ 0.233071] pnp 00:0d: [mem 0xfff80000-0xfff80fff]
- [ 0.233074] pnp 00:0d: [mem 0xfff90000-0xfffbffff]
- [ 0.233076] pnp 00:0d: [mem 0xfffed000-0xfffeffff]
- [ 0.233151] system 00:0d: [mem 0x000f0000-0x000f3fff] could not be reserved
- [ 0.233154] system 00:0d: [mem 0x000f4000-0x000f7fff] could not be reserved
- [ 0.233157] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
- [ 0.233160] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
- [ 0.233163] system 00:0d: [mem 0xafff0000-0xafffffff] could not be reserved
- [ 0.233167] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
- [ 0.233170] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.233173] system 00:0d: [mem 0x00100000-0xaffeffff] could not be reserved
- [ 0.233176] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.233179] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
- [ 0.233183] system 00:0d: [mem 0xfefff000-0xfeffffff] has been reserved
- [ 0.233186] system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
- [ 0.233189] system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
- [ 0.233192] system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
- [ 0.233196] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.233206] pnp: PnP ACPI: found 14 devices
- [ 0.233208] ACPI: ACPI bus type pnp unregistered
- [ 0.233212] PnPBIOS: Disabled by ACPI PNP
- [ 0.269443] Switching to clocksource acpi_pm
- [ 0.269490] PCI: max bus depth: 1 pci_try_num: 2
- [ 0.269517] pci 0000:00:09.0: BAR 15: assigned [mem 0xd5100000-0xd51fffff pref]
- [ 0.269521] pci 0000:00:02.1: BAR 0: assigned [mem 0xd5004000-0xd50040ff]
- [ 0.269526] pci 0000:00:02.1: BAR 0: set to [mem 0xd5004000-0xd50040ff] (PCI address [0xd5004000-0xd50040ff])
- [ 0.269531] pci 0000:05:0a.0: BAR 6: assigned [mem 0xd5100000-0xd517ffff pref]
- [ 0.269535] pci 0000:05:0c.0: BAR 6: assigned [mem 0xd5180000-0xd519ffff pref]
- [ 0.269538] pci 0000:00:09.0: PCI bridge to [bus 05-05]
- [ 0.269541] pci 0000:00:09.0: bridge window [io 0x8000-0x9fff]
- [ 0.269545] pci 0000:00:09.0: bridge window [mem 0xd3000000-0xd4ffffff]
- [ 0.269549] pci 0000:00:09.0: bridge window [mem 0xd5100000-0xd51fffff pref]
- [ 0.269554] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
- [ 0.269556] pci 0000:00:0b.0: bridge window [io disabled]
- [ 0.269559] pci 0000:00:0b.0: bridge window [mem disabled]
- [ 0.269562] pci 0000:00:0b.0: bridge window [mem pref disabled]
- [ 0.269566] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
- [ 0.269568] pci 0000:00:0c.0: bridge window [io disabled]
- [ 0.269571] pci 0000:00:0c.0: bridge window [mem disabled]
- [ 0.269574] pci 0000:00:0c.0: bridge window [mem pref disabled]
- [ 0.269578] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
- [ 0.269580] pci 0000:00:0d.0: bridge window [io disabled]
- [ 0.269583] pci 0000:00:0d.0: bridge window [mem disabled]
- [ 0.269586] pci 0000:00:0d.0: bridge window [mem pref disabled]
- [ 0.269591] pci 0000:01:00.0: BAR 6: assigned [mem 0xc2000000-0xc207ffff pref]
- [ 0.269594] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
- [ 0.269597] pci 0000:00:0e.0: bridge window [io 0xa000-0xafff]
- [ 0.269600] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd2ffffff]
- [ 0.269604] pci 0000:00:0e.0: bridge window [mem 0xb0000000-0xcfffffff 64bit pref]
- [ 0.269614] pci 0000:00:09.0: setting latency timer to 64
- [ 0.269620] pci 0000:00:0b.0: setting latency timer to 64
- [ 0.269625] pci 0000:00:0c.0: setting latency timer to 64
- [ 0.269630] pci 0000:00:0d.0: setting latency timer to 64
- [ 0.269635] pci 0000:00:0e.0: setting latency timer to 64
- [ 0.269639] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
- [ 0.269642] pci_bus 0000:00: resource 5 [mem 0xb0000000-0xffffffff]
- [ 0.269644] pci_bus 0000:00: resource 6 [mem 0xfeb00000-0xfec0ffff]
- [ 0.269647] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
- [ 0.269650] pci_bus 0000:05: resource 0 [io 0x8000-0x9fff]
- [ 0.269653] pci_bus 0000:05: resource 1 [mem 0xd3000000-0xd4ffffff]
- [ 0.269656] pci_bus 0000:05: resource 2 [mem 0xd5100000-0xd51fffff pref]
- [ 0.269659] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
- [ 0.269661] pci_bus 0000:05: resource 5 [mem 0xb0000000-0xffffffff]
- [ 0.269664] pci_bus 0000:05: resource 6 [mem 0xfeb00000-0xfec0ffff]
- [ 0.269667] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff]
- [ 0.269670] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
- [ 0.269673] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd2ffffff]
- [ 0.269676] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xcfffffff 64bit pref]
- [ 0.269728] NET: Registered protocol family 2
- [ 0.269813] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.270127] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.270992] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.271411] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.271414] TCP reno registered
- [ 0.271419] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.271433] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.271572] NET: Registered protocol family 1
- [ 0.270723] Switched to NOHz mode on CPU #0
- [ 0.271572] Switched to NOHz mode on CPU #1
- [ 0.340090] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.340096] pci 0000:00:0b.0: Found disabled HT MSI Mapping
- [ 0.340104] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.340110] pci 0000:00:0b.0: Linking AER extended capability
- [ 0.340146] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.340152] pci 0000:00:0c.0: Found disabled HT MSI Mapping
- [ 0.340159] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.340163] pci 0000:00:0c.0: Linking AER extended capability
- [ 0.340201] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.340207] pci 0000:00:0d.0: Found disabled HT MSI Mapping
- [ 0.340215] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.340218] pci 0000:00:0d.0: Linking AER extended capability
- [ 0.340260] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.340266] pci 0000:00:0e.0: Found disabled HT MSI Mapping
- [ 0.340274] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.340277] pci 0000:00:0e.0: Linking AER extended capability
- [ 0.340337] pci 0000:01:00.0: Boot video device
- [ 0.340348] PCI: CLS 32 bytes, default 64
- [ 0.340817] audit: initializing netlink socket (disabled)
- [ 0.340829] type=2000 audit(1318816799.336:1): initialized
- [ 0.371124] highmem bounce pool size: 64 pages
- [ 0.371132] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.390267] VFS: Disk quotas dquot_6.5.2
- [ 0.390350] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.391106] fuse init (API version 7.16)
- [ 0.391203] msgmni has been set to 1661
- [ 0.391578] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.391607] io scheduler noop registered
- [ 0.391610] io scheduler deadline registered
- [ 0.391625] io scheduler cfq registered (default)
- [ 0.391779] pcieport 0000:00:0b.0: setting latency timer to 64
- [ 0.391809] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
- [ 0.391850] pcieport 0000:00:0c.0: setting latency timer to 64
- [ 0.391869] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
- [ 0.391905] pcieport 0000:00:0d.0: setting latency timer to 64
- [ 0.391924] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
- [ 0.391959] pcieport 0000:00:0e.0: setting latency timer to 64
- [ 0.391977] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
- [ 0.392071] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.392100] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.392264] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 0.392271] ACPI: Power Button [PWRB]
- [ 0.392334] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.392337] ACPI: Power Button [PWRF]
- [ 0.392391] ACPI: Fan [FAN] (on)
- [ 0.392400] ACPI: acpi_idle registered with cpuidle
- [ 0.394794] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.394797] ACPI: Thermal Zone [THRM] (40 C)
- [ 0.394825] ERST: Table is not found!
- [ 0.394935] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 0.415231] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.415404] isapnp: Scanning for PnP cards...
- [ 0.509660] Freeing initrd memory: 13860k freed
- [ 0.767951] isapnp: No Plug & Play device found
- [ 0.790060] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.790410] Linux agpgart interface v0.103
- [ 0.792029] brd: module loaded
- [ 0.792689] loop: module loaded
- [ 0.792964] pata_acpi 0000:00:06.0: setting latency timer to 64
- [ 0.793211] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
- [ 0.793233] pata_acpi 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
- [ 0.793249] pata_acpi 0000:00:07.0: setting latency timer to 64
- [ 0.793256] pata_acpi 0000:00:07.0: PCI INT A disabled
- [ 0.793418] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
- [ 0.793428] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
- [ 0.793444] pata_acpi 0000:00:08.0: setting latency timer to 64
- [ 0.793451] pata_acpi 0000:00:08.0: PCI INT A disabled
- [ 0.793873] Fixed MDIO Bus: probed
- [ 0.793903] PPP generic driver version 2.4.2
- [ 0.793964] tun: Universal TUN/TAP device driver, 1.6
- [ 0.793966] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
- [ 0.794064] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.794188] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
- [ 0.794199] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
- [ 0.794218] ehci_hcd 0000:00:02.1: setting latency timer to 64
- [ 0.794221] ehci_hcd 0000:00:02.1: EHCI Host Controller
- [ 0.794264] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
- [ 0.794293] ehci_hcd 0000:00:02.1: debug port 1
- [ 0.794299] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
- [ 0.794320] ehci_hcd 0000:00:02.1: irq 21, io mem 0xd5004000
- [ 0.804027] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
- [ 0.804182] hub 1-0:1.0: USB hub found
- [ 0.804188] hub 1-0:1.0: 10 ports detected
- [ 0.804353] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
- [ 0.804364] ehci_hcd 0000:05:07.2: PCI INT C -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
- [ 0.804374] ehci_hcd 0000:05:07.2: EHCI Host Controller
- [ 0.804412] ehci_hcd 0000:05:07.2: new USB bus registered, assigned bus number 2
- [ 0.804455] ehci_hcd 0000:05:07.2: irq 19, io mem 0xd400a000
- [ 0.816019] ehci_hcd 0000:05:07.2: USB 2.0 started, EHCI 1.00
- [ 0.816134] hub 2-0:1.0: USB hub found
- [ 0.816138] hub 2-0:1.0: 4 ports detected
- [ 0.816211] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.816344] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
- [ 0.816356] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
- [ 0.816365] ohci_hcd 0000:00:02.0: setting latency timer to 64
- [ 0.816368] ohci_hcd 0000:00:02.0: OHCI Host Controller
- [ 0.816406] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
- [ 0.816429] ohci_hcd 0000:00:02.0: irq 20, io mem 0xd5003000
- [ 0.874119] hub 3-0:1.0: USB hub found
- [ 0.874125] hub 3-0:1.0: 10 ports detected
- [ 0.874206] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.874336] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
- [ 0.874350] uhci_hcd 0000:05:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
- [ 0.874358] uhci_hcd 0000:05:07.0: UHCI Host Controller
- [ 0.874397] uhci_hcd 0000:05:07.0: new USB bus registered, assigned bus number 4
- [ 0.874428] uhci_hcd 0000:05:07.0: irq 17, io base 0x00008000
- [ 0.874556] hub 4-0:1.0: USB hub found
- [ 0.874561] hub 4-0:1.0: 2 ports detected
- [ 0.874690] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
- [ 0.874701] uhci_hcd 0000:05:07.1: PCI INT B -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
- [ 0.874707] uhci_hcd 0000:05:07.1: UHCI Host Controller
- [ 0.874744] uhci_hcd 0000:05:07.1: new USB bus registered, assigned bus number 5
- [ 0.874773] uhci_hcd 0000:05:07.1: irq 18, io base 0x00008400
- [ 0.874901] hub 5-0:1.0: USB hub found
- [ 0.874905] hub 5-0:1.0: 2 ports detected
- [ 0.875030] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 1.116023] usb 1-1: new high speed USB device number 2 using ehci_hcd
- [ 1.128408] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.128530] mousedev: PS/2 mouse device common for all mice
- [ 1.128659] rtc_cmos 00:04: RTC can wake from S4
- [ 1.128759] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
- [ 1.128783] rtc0: alarms up to one year, y3k, 242 bytes nvram
- [ 1.128911] device-mapper: uevent: version 1.0.3
- [ 1.128990] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
- [ 1.129025] EISA: Probing bus 0 at eisa.0
- [ 1.129030] EISA: Cannot allocate resource for mainboard
- [ 1.129033] Cannot allocate resource for EISA slot 1
- [ 1.129036] Cannot allocate resource for EISA slot 2
- [ 1.129038] Cannot allocate resource for EISA slot 3
- [ 1.129041] Cannot allocate resource for EISA slot 4
- [ 1.129043] Cannot allocate resource for EISA slot 5
- [ 1.129046] Cannot allocate resource for EISA slot 6
- [ 1.129048] Cannot allocate resource for EISA slot 7
- [ 1.129051] Cannot allocate resource for EISA slot 8
- [ 1.129053] EISA: Detected 0 cards.
- [ 1.129067] cpufreq-nforce2: No nForce2 chipset.
- [ 1.129070] cpuidle: using governor ladder
- [ 1.129072] cpuidle: using governor menu
- [ 1.129074] EFI Variables Facility v0.08 2004-May-17
- [ 1.129372] TCP cubic registered
- [ 1.129520] NET: Registered protocol family 10
- [ 1.130122] NET: Registered protocol family 17
- [ 1.130140] Registering the dns_resolver key type
- [ 1.130176] Using IPI No-Shortcut mode
- [ 1.130260] PM: Hibernation image not present or could not be loaded.
- [ 1.130274] registered taskstats version 1
- [ 1.146877] Magic number: 15:845:963
- [ 1.146997] rtc_cmos 00:04: setting system clock to 2011-10-17 02:00:00 UTC (1318816800)
- [ 1.147007] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2 cpu cores) (version 2.20.00)
- [ 1.147018] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
- [ 1.147020] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
- [ 1.147037] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 1.147040] EDD information not available.
- [ 1.147169] Freeing unused kernel memory: 696k freed
- [ 1.147603] Write protecting the kernel text: 5332k
- [ 1.147649] Write protecting the kernel read-only data: 2188k
- [ 1.168956] udevd[81]: starting version 173
- [ 1.206536] pata_amd 0000:00:06.0: version 0.4.1
- [ 1.206591] pata_amd 0000:00:06.0: setting latency timer to 64
- [ 1.242473] scsi0 : pata_amd
- [ 1.246316] scsi1 : pata_amd
- [ 1.246843] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
- [ 1.246847] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
- [ 1.247624] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
- [ 1.247790] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
- [ 1.247798] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
- [ 1.247804] forcedeth 0000:00:0a.0: setting latency timer to 64
- [ 1.249008] hub 1-1:1.0: USB hub found
- [ 1.249087] hub 1-1:1.0: 7 ports detected
- [ 1.250357] skge 0000:05:0c.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
- [ 1.250405] skge: 1.13 addr 0xd4004000 irq 17 chip Yukon-Lite rev 9
- [ 1.250983] skge 0000:05:0c.0: eth0: addr 00:13:d4:d1:c1:df
- [ 1.254120] sata_sil 0000:05:0a.0: version 2.4
- [ 1.254200] sata_sil 0000:05:0a.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
- [ 1.254235] sata_sil 0000:05:0a.0: Applying R_ERR on DMA activate FIS errata fix
- [ 1.261427] scsi2 : sata_sil
- [ 1.264648] scsi3 : sata_sil
- [ 1.268522] scsi4 : sata_sil
- [ 1.271729] scsi5 : sata_sil
- [ 1.271847] ata3: SATA max UDMA/100 mmio m1024@0xd4009000 tf 0xd4009080 irq 19
- [ 1.271852] ata4: SATA max UDMA/100 mmio m1024@0xd4009000 tf 0xd40090c0 irq 19
- [ 1.271855] ata5: SATA max UDMA/100 mmio m1024@0xd4009000 tf 0xd4009280 irq 19
- [ 1.271859] ata6: SATA max UDMA/100 mmio m1024@0xd4009000 tf 0xd40092c0 irq 19
- [ 1.279762] Floppy drive(s): fd0 is 1.44M
- [ 1.326776] FDC 0 is a post-1991 82077
- [ 1.360061] usb 1-2: new high speed USB device number 3 using ehci_hcd
- [ 1.580262] ata2.01: ATAPI: HL-DT-ST GCE-8400B, B104, max UDMA/33
- [ 1.580273] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0) ACPI=0x701f (600:60:0x1c)
- [ 1.596033] ata3: SATA link down (SStatus 0 SControl 310)
- [ 1.596200] ata2.01: configured for UDMA/33
- [ 1.596691] scsi 1:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8400B B104 PQ: 0 ANSI: 5
- [ 1.597752] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
- [ 1.597755] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.597920] sr 1:0:1:0: Attached scsi CD-ROM sr0
- [ 1.598010] sr 1:0:1:0: Attached scsi generic sg0 type 5
- [ 1.604035] usb 2-1: new high speed USB device number 2 using ehci_hcd
- [ 1.768761] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:13:d4:d2:3b:b4
- [ 1.768766] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
- [ 1.768804] sata_nv 0000:00:07.0: version 3.5
- [ 1.768826] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
- [ 1.768884] sata_nv 0000:00:07.0: setting latency timer to 64
- [ 1.769337] scsi6 : sata_nv
- [ 1.769468] scsi7 : sata_nv
- [ 1.769626] ata7: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23
- [ 1.769629] ata8: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23
- [ 1.769657] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
- [ 1.769700] sata_nv 0000:00:08.0: setting latency timer to 64
- [ 1.769984] scsi8 : sata_nv
- [ 1.770094] scsi9 : sata_nv
- [ 1.770258] ata9: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 22
- [ 1.770262] ata10: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 22
- [ 1.859576] usbcore: registered new interface driver uas
- [ 1.916032] ata4: SATA link down (SStatus 0 SControl 310)
- [ 1.968024] usb 2-2: new high speed USB device number 3 using ehci_hcd
- [ 2.080040] ata7: SATA link down (SStatus 0 SControl 300)
- [ 2.106203] Initializing USB Mass Storage driver...
- [ 2.106616] scsi10 : usb-storage 2-1:1.0
- [ 2.106830] scsi11 : usb-storage 2-2:1.0
- [ 2.106990] usbcore: registered new interface driver usb-storage
- [ 2.106996] USB Mass Storage support registered.
- [ 2.188473] usb 1-1.1: new full speed USB device number 4 using ehci_hcd
- [ 2.236032] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 2.236159] ata5: SATA link down (SStatus 0 SControl 310)
- [ 2.251980] ata9.00: ATA-8: WDC WD800AAJS-00B4A0, 01.03A01, max UDMA/133
- [ 2.251983] ata9.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 0/32)
- [ 2.260369] ata9.00: configured for UDMA/133
- [ 2.299971] usb 1-1.1: config 1 interface 0 altsetting 0 endpoint 0x1 has an invalid bInterval 0, changing to 32
- [ 2.299975] usb 1-1.1: config 1 interface 0 altsetting 0 endpoint 0x82 has an invalid bInterval 0, changing to 32
- [ 2.388475] usb 1-1.6: new low speed USB device number 5 using ehci_hcd
- [ 2.556034] ata6: SATA link down (SStatus 0 SControl 310)
- [ 2.589643] input: Western Digital My Book as /devices/pci0000:00/0000:00:09.0/0000:05:07.2/usb2/2-1/2-1:1.1/input/input2
- [ 2.589776] generic-usb 0003:1058:1104.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:05:07.2-1/input1
- [ 2.589908] usbcore: registered new interface driver usbhid
- [ 2.589910] usbhid: USB HID core driver
- [ 2.599882] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.6/1-1.6:1.0/input/input3
- [ 2.600041] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:02.1-1.6/input0
- [ 2.604472] usb 1-1.7: new low speed USB device number 6 using ehci_hcd
- [ 2.611878] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.6/1-1.6:1.1/input/input4
- [ 2.611969] microsoft 0003:045E:00DB.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:02.1-1.6/input1
- [ 2.721493] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.7/1-1.7:1.0/input/input5
- [ 2.721632] generic-usb 0003:046D:C046.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:02.1-1.7/input0
- [ 2.868024] ata8: SATA link down (SStatus 0 SControl 300)
- [ 2.868286] scsi 8:0:0:0: Direct-Access ATA WDC WD800AAJS-00 01.0 PQ: 0 ANSI: 5
- [ 2.868455] sd 8:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
- [ 2.868499] sd 8:0:0:0: Attached scsi generic sg1 type 0
- [ 2.868516] sd 8:0:0:0: [sda] Write Protect is off
- [ 2.868519] sd 8:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.868544] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.898622] sda: sda1 sda2 < sda5 >
- [ 2.898971] sd 8:0:0:0: [sda] Attached SCSI disk
- [ 3.105103] scsi 11:0:0:0: Direct-Access WD My Book 1110 1028 PQ: 0 ANSI: 4
- [ 3.105955] scsi 11:0:0:1: CD-ROM WD Virtual CD 1110 1028 PQ: 0 ANSI: 4
- [ 3.106704] scsi 11:0:0:2: Enclosure WD SES Device 1028 PQ: 0 ANSI: 4
- [ 3.130960] scsi 10:0:0:0: Direct-Access WD My Book 1008 PQ: 0 ANSI: 4
- [ 3.143335] scsi 10:0:0:1: Enclosure WD My Book Device 1008 PQ: 0 ANSI: 4
- [ 3.196275] sd 11:0:0:0: Attached scsi generic sg2 type 0
- [ 3.197096] sd 11:0:0:0: [sdb] 1952151552 512-byte logical blocks: (999 GB/930 GiB)
- [ 3.198597] sr1: scsi3-mmc drive: 51x/51x caddy
- [ 3.198816] sr 11:0:0:1: Attached scsi CD-ROM sr1
- [ 3.198942] sr 11:0:0:1: Attached scsi generic sg3 type 5
- [ 3.199095] scsi 11:0:0:2: Attached scsi generic sg4 type 13
- [ 3.200349] sd 11:0:0:0: [sdb] Write Protect is off
- [ 3.200352] sd 11:0:0:0: [sdb] Mode Sense: 23 00 10 00
- [ 3.202967] sd 11:0:0:0: [sdb] No Caching mode page present
- [ 3.202970] sd 11:0:0:0: [sdb] Assuming drive cache: write through
- [ 3.207216] sd 11:0:0:0: [sdb] No Caching mode page present
- [ 3.207219] sd 11:0:0:0: [sdb] Assuming drive cache: write through
- [ 3.236279] sd 10:0:0:0: Attached scsi generic sg5 type 0
- [ 3.236425] scsi 10:0:0:1: Attached scsi generic sg6 type 13
- [ 3.336034] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 3.344227] ata10.00: ATA-7: WDC WD800JD-75MSA3, 10.01E04, max UDMA/133
- [ 3.344231] ata10.00: 156250000 sectors, multi 1: LBA48 NCQ (depth 0/32)
- [ 3.352213] ata10.00: configured for UDMA/133
- [ 3.352347] scsi 9:0:0:0: Direct-Access ATA WDC WD800JD-75MS 10.0 PQ: 0 ANSI: 5
- [ 3.352502] sd 9:0:0:0: Attached scsi generic sg7 type 0
- [ 3.352633] sd 9:0:0:0: [sdd] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
- [ 3.352689] sd 9:0:0:0: [sdd] Write Protect is off
- [ 3.352692] sd 9:0:0:0: [sdd] Mode Sense: 00 3a 00 00
- [ 3.352715] sd 9:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.363733] sdd: sdd1
- [ 3.364072] sd 9:0:0:0: [sdd] Attached SCSI disk
- [ 8.045631] EXT3-fs (sda1): recovery required on readonly filesystem
- [ 8.045636] EXT3-fs (sda1): write access will be enabled during recovery
- [ 8.052878] EXT3-fs: barriers not enabled
- [ 8.839401] kjournald starting. Commit interval 5 seconds
- [ 8.839472] EXT3-fs (sda1): recovery complete
- [ 8.839985] EXT3-fs (sda1): mounted filesystem with ordered data mode
- [ 11.483598] sdb: sdb1
- [ 11.488257] sd 11:0:0:0: [sdb] No Caching mode page present
- [ 11.488260] sd 11:0:0:0: [sdb] Assuming drive cache: write through
- [ 11.488264] sd 11:0:0:0: [sdb] Attached SCSI disk
- [ 18.496543] sd 10:0:0:0: [sdc] 3907026944 512-byte logical blocks: (2.00 TB/1.81 TiB)
- [ 18.506412] sd 10:0:0:0: [sdc] Write Protect is off
- [ 18.506416] sd 10:0:0:0: [sdc] Mode Sense: 10 00 00 00
- [ 18.516914] sd 10:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 18.613474] sdc: sdc1 sdc2
- [ 18.658568] sd 10:0:0:0: [sdc] Attached SCSI disk
- [ 18.661991] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
- [ 18.662013] firewire_ohci 0000:05:0b.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
- [ 18.716098] firewire_ohci: Added fw-ohci device 0000:05:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
- [ 19.216139] firewire_core: created device fw0: GUID 0011d80000643578, S400
- [ 45.802814] udevd[392]: starting version 173
- [ 45.814437] lp: driver loaded but no devices found
- [ 45.844218] it87: Found IT8712F chip at 0x290, revision 7
- [ 45.844229] it87: VID is disabled (pins used for GPIO)
- [ 45.844342] it87 it87.656: Detected broken BIOS defaults, disabling PWM interface
- [ 45.877860] i2c i2c-0: nForce2 SMBus adapter at 0x4c00
- [ 45.877898] i2c i2c-1: nForce2 SMBus adapter at 0x4c40
- [ 45.922517] parport_pc 00:09: reported by Plug and Play ACPI
- [ 45.922584] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
- [ 46.021626] lp0: using parport0 (interrupt-driven).
- [ 46.038544] gameport gameport0: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 59659kHz
- [ 46.180694] udevd[414]: renamed network interface eth1 to eth2
- [ 46.215827] type=1400 audit(1318816845.562:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=646 comm="apparmor_parser"
- [ 46.216363] type=1400 audit(1318816845.566:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=646 comm="apparmor_parser"
- [ 46.216644] type=1400 audit(1318816845.566:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=646 comm="apparmor_parser"
- [ 46.221063] type=1400 audit(1318816845.570:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=661 comm="apparmor_parser"
- [ 46.264835] udevd[480]: renamed network interface eth0 to eth3
- [ 46.286744] ses 11:0:0:2: Attached Enclosure device
- [ 46.286756] ses 10:0:0:1: Attached Enclosure device
- [ 46.295192] IR NEC protocol handler initialized
- [ 46.300221] HDA Intel 0000:01:00.1: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
- [ 46.300229] hda_intel: Disabling MSI
- [ 46.300262] HDA Intel 0000:01:00.1: setting latency timer to 64
- [ 46.306776] IR RC5(x) protocol handler initialized
- [ 46.316647] IR RC6 protocol handler initialized
- [ 46.320174] Registered IR keymap rc-rc6-mce
- [ 46.320460] input: Media Center Ed. eHome Infrared Remote Transceiver (1784:0008) as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.1/1-1.1:1.0/rc/rc0/input6
- [ 46.320582] rc0: Media Center Ed. eHome Infrared Remote Transceiver (1784:0008) as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.1/1-1.1:1.0/rc/rc0
- [ 46.324082] mceusb 1-1.1:1.0: Registered Topseed Technology Corp. eHome Infrared Transceiver on usb1:4
- [ 46.325008] usbcore: registered new interface driver mceusb
- [ 46.325373] IR JVC protocol handler initialized
- [ 46.336083] IR Sony protocol handler initialized
- [ 46.345769] lirc_dev: IR Remote Control driver registered, major 249
- [ 46.346088] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
- [ 46.346092] IR LIRC bridge handler initialized
- [ 46.586906] nvidia: module license 'NVIDIA' taints kernel.
- [ 46.586912] Disabling lock debugging due to kernel taint
- [ 46.641400] ppdev: user-space parallel port driver
- [ 47.140026] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
- [ 47.172025] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
- [ 47.204022] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
- [ 47.236022] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
- [ 47.252335] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/0000:01:00.1/sound/card0/input7
- [ 47.252615] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/0000:01:00.1/sound/card0/input8
- [ 47.252825] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/0000:01:00.1/sound/card0/input9
- [ 47.253030] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/0000:01:00.1/sound/card0/input10
- [ 47.925126] EXT3-fs (sda1): using internal journal
- [ 48.159389] nvidia 0000:01:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
- [ 48.159403] nvidia 0000:01:00.0: setting latency timer to 64
- [ 48.159410] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 48.160424] NVRM: loading NVIDIA UNIX x86 Kernel Module 280.13 Wed Jul 27 16:55:43 PDT 2011
- [ 48.227942] vesafb: mode is 640x480x32, linelength=2560, pages=0
- [ 48.227948] vesafb: scrolling: redraw
- [ 48.227952] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 48.228401] vesafb: framebuffer at 0xc1000000, mapped to 0xf8400000, using 1216k, total 1216k
- [ 48.228671] Console: switching to colour frame buffer device 80x30
- [ 48.228688] fb0: VESA VGA frame buffer device
- [ 94.561821] type=1400 audit(1318816893.910:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1075 comm="apparmor_parser"
- [ 94.575996] type=1400 audit(1318816893.922:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1075 comm="apparmor_parser"
- [ 94.576198] type=1400 audit(1318816893.926:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1074 comm="apparmor_parser"
- [ 94.577479] type=1400 audit(1318816893.926:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1075 comm="apparmor_parser"
- [ 94.589676] type=1400 audit(1318816893.938:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1087 comm="apparmor_parser"
- [ 94.590638] type=1400 audit(1318816893.938:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1087 comm="apparmor_parser"
- [ 94.614774] type=1400 audit(1318816893.962:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1094 comm="apparmor_parser"
- [ 94.620199] type=1400 audit(1318816893.970:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1094 comm="apparmor_parser"
- [ 94.631880] type=1400 audit(1318816893.978:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1096 comm="apparmor_parser"
- [ 94.634595] type=1400 audit(1318816893.982:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1080 comm="apparmor_parser"
- [ 94.701440] init: Failed to spawn mysql main process: unable to execute: No such file or directory
- [ 94.917261] skge 0000:05:0c.0: eth3: enabling interface
- [ 94.944500] forcedeth 0000:00:0a.0: eth2: no link during initialization
- [ 94.945136] ADDRCONF(NETDEV_UP): eth2: link is not ready
- [ 94.966755] apm: BIOS not found.
- [ 95.009560] init: failsafe main process (1006) killed by TERM signal
- [ 95.011063] init: apport pre-start process (1178) terminated with status 1
- [ 95.042882] init: apport post-stop process (1226) terminated with status 1
- [ 97.299478] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=0
- [ 97.306772] HDMI status: Pin=5 Presence_Detect=1 ELD_Valid=0
- [ 97.323412] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=1
- [ 97.328050] HDMI status: Pin=5 Presence_Detect=1 ELD_Valid=1
- [ 97.375691] skge 0000:05:0c.0: eth3: Link is up at 1000 Mbps, full duplex, flow control both
- [ 98.108070] HDMI: detected monitor VL470M
- [ 98.108074] at connection type HDMI
- [ 98.108078] HDMI: available speakers: FL/FR
- [ 98.108083] HDMI: supports coding type AC-3: channels = 2, rates = 44100 48000 88200, max bitrate = 24000
- [ 103.128283] vboxdrv: Found 2 processor cores.
- [ 103.128686] vboxdrv: fAsync=1 offMin=0x1c8e76 offMax=0x1c8e76
- [ 103.129108] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
- [ 103.129111] vboxdrv: Successfully loaded version 4.0.4 (interface 0x00160000).
- [ 105.052232] warning: `VBoxHeadless' uses 32-bit capabilities (legacy support in use)
- [ 105.184029] eth3: no IPv6 routers present
- [ 105.590398] device eth3 entered promiscuous mode
- [ 105.671841] Bluetooth: Core ver 2.16
- [ 105.671893] NET: Registered protocol family 31
- [ 105.671896] Bluetooth: HCI device and connection manager initialized
- [ 105.671899] Bluetooth: HCI socket layer initialized
- [ 105.671901] Bluetooth: L2CAP socket layer initialized
- [ 105.673493] Bluetooth: SCO socket layer initialized
- [ 105.677306] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 105.677312] Bluetooth: BNEP filters: protocol multicast
- [ 105.683418] Bluetooth: RFCOMM TTY layer initialized
- [ 105.683428] Bluetooth: RFCOMM socket layer initialized
- [ 105.683430] Bluetooth: RFCOMM ver 1.11
- [ 105.771610] NET: Registered protocol family 5
- [ 106.793534] init: plymouth-stop pre-start process (2688) terminated with status 1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement