RTL8191SEvB (rtl RTL8192)

[   21.231952] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   21.238314] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:2b
[   21.238319] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:4f
[   21.238322] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:22
[   21.238331] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:22
[   21.238334] Associated successfully
[   21.238336] normal associate
[   21.238345] Using G rates:108
[   21.238348] Successfully associated, ht enabled
[   21.238351] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   21.239612] RX: IEEE802.1X EAPOL frame!
[   21.248385] pHTInfo->bCurBW40MHz is 0
[   21.248397] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x100ff005
[   21.261767] RX: IEEE802.1X EAPOL frame!
[   21.279084] RX: IEEE802.1X EAPOL frame!
[   21.294205] RX: IEEE802.1X EAPOL frame!
[   21.309222] RX: IEEE802.1X EAPOL frame!
[   21.320565] RX: IEEE802.1X EAPOL frame!
[   21.397466] RX: IEEE802.1X EAPOL frame!
[   21.402149] RX: IEEE802.1X EAPOL frame!
[   21.407711] RX: IEEE802.1X EAPOL frame!
[   21.416087] RX: IEEE802.1X EAPOL frame!
[   21.424467] RX: IEEE802.1X EAPOL frame!
[   21.430484] RX: IEEE802.1X EAPOL frame!
[   21.438331] RX: IEEE802.1X EAPOL frame!
[   21.440136] RX: IEEE802.1X EAPOL frame!
[   21.445777] RX: IEEE802.1X EAPOL frame!
[   21.445899] alg name:CCMP
[   21.523578] padlock_aes: VIA PadLock not detected.
[   21.594052] Intel AES-NI instructions are not detected.
[   21.608878] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[   21.609487] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[   21.609601] alg name:TKIP
[   21.706883] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[   21.707493] set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[   22.040088] DHCP pkt src port:68, dest port:67!!
[   22.045740] ====>rx ADDBAREQ from :a4:0c:c3:47:38:10
[   22.045751] ====>to send ADDBARSP
[   22.420404] dm_check_edca_turbo():iot peer is cisco, bssid:a4:0c:c3:47:38:10
[   23.070093] DHCP pkt src port:68, dest port:67!!
[   23.137643] DHCP pkt src port:68, dest port:67!!
[   24.642150] =========>what frame??====>to send ADDBAREQ!!!!!
[   25.448849] ====>rx ADDBARSP from :a4:0c:c3:47:38:10
[   30.446919] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[   36.597251] EXT4-fs (sda7): re-mounted. Opts: commit=600
[   47.279841] NET: Registered protocol family 10
[   47.281355] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   57.563363] wlan0: no IPv6 routers present
[   67.003083] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[   68.556409] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x100ff005
[   68.573541] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[   82.623578] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  100.680223] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  107.006692] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[  108.546807] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x100ff005
[  108.549569] notify_wx_assoc_event(): Tell user space disconnected
[  108.549594] Linking with eduroam,channel:1, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[  108.549621] Linking with eduroam,channel:6, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[  108.556994] rtllib: received DELBA while QOS or HT is not supported(0, 1)
[  108.566348] rtllib_associate_procedure_wq(), chan:6
[  108.566353] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  108.587530] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  108.589279] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[  108.598833] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:2b
[  108.598838] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:4f
[  108.598841] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:22
[  108.598844] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:22
[  108.598847] Associated successfully
[  108.598849] normal associate
[  108.598858] Using G rates:108
[  108.598860] Successfully associated, ht enabled
[  108.598864] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  108.604247] RX: IEEE802.1X EAPOL frame!
[  108.608904] pHTInfo->bCurBW40MHz is 0
[  108.608918] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x100ff005
[  112.720235] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  124.207343] disauth packet !
[  125.715766] Linking with eduroam,channel:1, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[  125.715787] Linking with eduroam,channel:11, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
[  125.715849] rtllib_associate_procedure_wq(), chan:11
[  125.715853] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  125.730983] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  125.732724] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  125.737668] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:25
[  125.737673] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:49
[  125.737677] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:1c
[  125.737679] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:1c
[  125.737682] Associated successfully
[  125.737684] normal associate
[  125.737693] Using G rates:108
[  125.737696] Successfully associated, ht not enabled(0, 0)
[  125.737704] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[  125.738777] RX: IEEE802.1X EAPOL frame!
[  125.753423] RX: IEEE802.1X EAPOL frame!
[  125.764269] RX: IEEE802.1X EAPOL frame!
[  125.772153] RX: IEEE802.1X EAPOL frame!
[  125.779045] RX: IEEE802.1X EAPOL frame!
[  125.780863] RX: IEEE802.1X EAPOL frame!
[  125.786707] RX: IEEE802.1X EAPOL frame!
[  125.786976] alg name:CCMP
[  125.786991] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[  125.787598] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[  125.787794] alg name:TKIP
[  125.787809] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[  125.788415] set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[  125.830104] DHCP pkt src port:68, dest port:67!!
[  134.793578] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  136.216675] wlan0: no IPv6 routers present
[  138.806888] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  152.853549] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  167.004619] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[  168.540100] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[  168.907072] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  201.013762] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  207.004823] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[  208.543390] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[  209.040212] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  215.060170] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  257.200186] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  263.223550] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  267.004802] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[  268.540069] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[  269.240219] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  283.289683] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  299.949152] ========>too long to sleep:40, fffffff0, bb8
[  317.400435] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  325.427117] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  335.194413] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[  335.194564] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[  335.194701] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[  335.194839] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[  335.194889] ehci_hcd 0000:00:1a.7: PME# enabled
[  335.207006] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[  335.207172] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[  335.207310] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[  335.207449] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[  335.207502] ehci_hcd 0000:00:1d.7: PME# enabled
[  347.007839] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[  348.543609] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[  349.506926] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  351.539698] =========>what frame??LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  411.537337] =========>what frame??LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  424.164284] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[  429.776848] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  448.540263] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[  449.840213] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  457.866887] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  471.534573] =========>what frame??LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  485.960217] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  493.987002] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  506.027049] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  518.067081] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  531.532371] =========>what frame??LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  542.147049] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  548.166861] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  552.180396] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  560.048046] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[  562.213712] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  567.004999] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[  568.541045] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[  568.544697] notify_wx_assoc_event(): Tell user space disconnected
[  568.544730] Linking with eduroam,channel:1, qos:1, myHT:0, networkHT:1, mode:10 cur_net.flags:0x40e
[  568.544748] Linking with eduroam,channel:6, qos:1, myHT:0, networkHT:1, mode:10 cur_net.flags:0x40e
[  568.554890] rtllib_associate_procedure_wq(), chan:6
[  568.554896] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  568.564946] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  568.589243] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[  571.093506] Linking with eduroam,channel:6, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[  571.093521] rtllib_associate_procedure_wq(), chan:6
[  571.093525] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  571.103573] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  571.530898] =========>what frame??
[  573.610198] Linking with eduroam,channel:6, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[  573.610219] rtllib_associate_procedure_wq(), chan:6
[  573.610223] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  573.620266] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  576.126670] Linking with eduroam,channel:6, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[  576.126693] rtllib_associate_procedure_wq(), chan:6
[  576.126696] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  576.136748] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  578.639975] Linking with eduroam,channel:6, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[  578.656825] ============>sync_scan_hurryup out
[  578.657027] rtllib_associate_procedure_wq(), chan:6
[  578.657031] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  578.667073] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  578.667895] Linking with eduroam,channel:6, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[  578.667914] Linking with eduroam,channel:11, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[  578.668722] rtllib_associate_procedure_wq(), chan:11
[  578.668727] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  578.678770] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  578.729377] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[  578.738808] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:2b
[  578.738813] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:4f
[  578.738817] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:22
[  578.738819] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:22
[  578.738823] Associated successfully
[  578.738825] normal associate
[  578.738835] Using G rates:108
[  578.738837] Successfully associated, ht enabled
[  578.738841] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  578.742113] RX: IEEE802.1X EAPOL frame!
[  578.748882] pHTInfo->bCurBW40MHz is 0
[  578.748894] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x100ff005
[  578.761094] RX: IEEE802.1X EAPOL frame!
[  578.769059] RX: IEEE802.1X EAPOL frame!
[  578.775862] RX: IEEE802.1X EAPOL frame!
[  578.784244] RX: IEEE802.1X EAPOL frame!
[  578.786044] RX: IEEE802.1X EAPOL frame!
[  578.792554] RX: IEEE802.1X EAPOL frame!
[  578.792668] alg name:CCMP
[  578.792683] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[  578.793296] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[  578.793366] alg name:TKIP
[  578.793380] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[  578.793986] set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[  579.030143] ====>rx ADDBAREQ from :a4:0c:c3:47:2f:20
[  579.030154] ====>to send ADDBARSP
[  582.316847] ====>to send ADDBAREQ!!!!!
[  582.325308] ====>rx ADDBARSP from :a4:0c:c3:47:2f:20
[  598.334140] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  598.334154] ===>rtl819x_watchdog_wqcallback(): AP is power off,chan:11, connect another one
[  598.334159] ===========>RemovePeerTS,a4:0c:c3:47:2f:20
[  598.334162] ====>remove Tx_TS_admin_list
[  598.334183] notify_wx_assoc_event(): Tell user space disconnected
[  599.909208] Linking with eduroam,channel:1, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[  599.909228] rtllib_associate_procedure_wq(), chan:1
[  599.909232] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  599.919278] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  599.919314] Linking with eduroam,channel:1, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[  599.920588] rtllib_associate_procedure_wq(), chan:1
[  599.920593] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  599.930641] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  599.932446] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[  599.937924] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:2b
[  599.937929] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:4f
[  599.937932] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:22
[  599.937935] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:22
[  599.937938] Associated successfully
[  599.937940] normal associate
[  599.937947] Using G rates:108
[  599.937950] Successfully associated, ht enabled
[  599.937953] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  599.944605] RX: IEEE802.1X EAPOL frame!
[  599.947991] pHTInfo->bCurBW40MHz is 0
[  599.948004] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x100ff005
[  599.959741] RX: IEEE802.1X EAPOL frame!
[  599.967719] RX: IEEE802.1X EAPOL frame!
[  599.974881] RX: IEEE802.1X EAPOL frame!
[  599.981601] RX: IEEE802.1X EAPOL frame!
[  599.983394] RX: IEEE802.1X EAPOL frame!
[  599.989329] RX: IEEE802.1X EAPOL frame!
[  599.989769] alg name:CCMP
[  599.989785] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[  599.990393] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[  599.990830] alg name:TKIP
[  599.990846] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[  599.991455] set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[  600.623247] ====>rx ADDBAREQ from :a4:0c:c3:47:38:10
[  600.623258] ====>to send ADDBARSP
[  600.656815] ====>to send ADDBAREQ!!!!!
[  600.658765] ====>rx ADDBARSP from :a4:0c:c3:47:38:10
[  610.373670] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  624.637547] =========>what frame??LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  650.506812] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  684.620381] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  684.636702] =========>what frame??LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[  688.540220] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x100ff005
[  688.542630] notify_wx_assoc_event(): Tell user space disconnected
[  688.542654] Linking with eduroam,channel:1, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[  688.542684] Linking with eduroam,channel:11, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
[  688.542775] rtllib_associate_procedure_wq(), chan:11
[  688.542779] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  688.552822] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  691.053512] Linking with eduroam,channel:11, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
[  691.053522] rtllib_associate_procedure_wq(), chan:11
[  691.053525] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  691.063564] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  691.067041] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  691.073683] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:25
[  691.073687] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:49
[  691.073690] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:1c
[  691.073693] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:1c
[  691.073697] Associated successfully
[  691.073699] normal associate
[  691.073708] Using G rates:108
[  691.073710] Successfully associated, ht not enabled(0, 0)
[  691.073718] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[  691.079207] RX: IEEE802.1X EAPOL frame!
[  691.100003] RX: IEEE802.1X EAPOL frame!
[  691.108512] RX: IEEE802.1X EAPOL frame!
[  691.115006] RX: IEEE802.1X EAPOL frame!
[  691.126300] RX: IEEE802.1X EAPOL frame!
[  691.128059] RX: IEEE802.1X EAPOL frame!
[  691.133995] RX: IEEE802.1X EAPOL frame!
[  691.134126] alg name:CCMP
[  691.134152] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[  691.134759] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[  691.134822] alg name:TKIP
[  691.134836] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[  691.135442] set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[  708.700385] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  711.533472] =========>what frame??LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  748.833489] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  754.853713] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  766.893504] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  771.532580] =========>what frame??LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  808.543544] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[  808.546583] notify_wx_assoc_event(): Tell user space disconnected
[  808.546639] Linking with eduroam,channel:1, qos:1, myHT:0, networkHT:1, mode:10 cur_net.flags:0x40e
[  808.546658] Linking with eduroam,channel:1, qos:1, myHT:0, networkHT:1, mode:10 cur_net.flags:0x40e
[  808.552499] rtllib_associate_procedure_wq(), chan:1
[  808.552505] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  808.562547] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  808.564334] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[  808.571257] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:2b
[  808.571263] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:4f
[  808.571266] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:22
[  808.571268] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:22
[  808.571272] Associated successfully
[  808.571274] normal associate
[  808.571286] Using G rates:108
[  808.571288] Successfully associated, ht enabled
[  808.571292] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  808.577077] RX: IEEE802.1X EAPOL frame!
[  808.581338] pHTInfo->bCurBW40MHz is 0
[  808.581354] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x100ff005
[  813.047015] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  824.207571] disauth packet !
[  824.659999] =========>what frame??
[  825.715897] Linking with eduroam,channel:1, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[  825.715917] Linking with eduroam,channel:1, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[  825.716193] rtllib_associate_procedure_wq(), chan:1
[  825.716198] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  825.744522] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  825.749253] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[  825.757929] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:2b
[  825.757934] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:4f
[  825.757937] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:22
[  825.757940] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:22
[  825.757943] Associated successfully
[  825.757946] normal associate
[  825.757956] Using G rates:108
[  825.757959] Successfully associated, ht enabled
[  825.757962] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  825.759148] RX: IEEE802.1X EAPOL frame!
[  825.767997] pHTInfo->bCurBW40MHz is 0
[  825.768009] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x100ff005
[  825.779018] RX: IEEE802.1X EAPOL frame!
[  825.786818] RX: IEEE802.1X EAPOL frame!
[  825.793079] RX: IEEE802.1X EAPOL frame!
[  825.799828] RX: IEEE802.1X EAPOL frame!
[  825.801626] RX: IEEE802.1X EAPOL frame!
[  825.807490] RX: IEEE802.1X EAPOL frame!
[  825.807603] alg name:CCMP
[  825.807618] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[  825.808227] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[  825.808294] alg name:TKIP
[  825.808307] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[  825.808913] set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[  825.836890] DHCP pkt src port:68, dest port:67!!
[  825.843054] ====>rx ADDBAREQ from :a4:0c:c3:47:38:10
[  825.843064] ====>to send ADDBARSP
[  830.670077] ====>to send ADDBAREQ!!!!!
[  830.673286] ====>rx ADDBARSP from :a4:0c:c3:47:38:10
[  833.113674] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  836.470053] wlan0: no IPv6 routers present
[  861.206802] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  861.795298] rtl8192_hw_sleep_down(): RF Change in progress!
[  869.233506] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  899.918490] rtl8192_hw_sleep_down(): RF Change in progress!
[  923.413639] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  924.658736] =========>what frame??LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[  928.540200] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x100ff005
[  929.433496] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  966.138019] rtl8192_hw_sleep_down(): RF Change in progress!
[  967.003933] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[  968.540021] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x100ff005
[  968.542872] notify_wx_assoc_event(): Tell user space disconnected
[  968.542910] Linking with eduroam,channel:1, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[  968.543142] rtllib_associate_procedure_wq(), chan:1
[  968.543146] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  968.548482] rtllib: received DELBA while QOS or HT is not supported(0, 1)
[  968.553197] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  968.554680] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[  968.557613] Linking with eduroam,channel:11, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
[  968.558025] rtllib_associate_procedure_wq(), chan:11
[  968.558029] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  968.568264] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  968.571454] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  971.073454] Linking with eduroam,channel:11, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[  971.073465] rtllib_associate_procedure_wq(), chan:11
[  971.073469] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  971.083562] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  971.087989] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  971.093521] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:25
[  971.093526] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:49
[  971.093530] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:1c
[  971.093532] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:1c
[  971.093536] Associated successfully
[  971.093538] normal associate
[  971.093548] Using G rates:108
[  971.093551] Successfully associated, ht not enabled(0, 0)
[  971.093559] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[  971.094881] RX: IEEE802.1X EAPOL frame!
[  971.105850] RX: IEEE802.1X EAPOL frame!
[  971.114250] RX: IEEE802.1X EAPOL frame!
[  971.121016] RX: IEEE802.1X EAPOL frame!
[  971.128232] RX: IEEE802.1X EAPOL frame!
[  971.131688] RX: IEEE802.1X EAPOL frame!
[  971.138930] RX: IEEE802.1X EAPOL frame!
[  971.139129] alg name:CCMP
[  971.139148] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[  971.139755] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[  971.139848] alg name:TKIP
[  971.139863] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[  971.140470] set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[  979.600144] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  985.620148] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  990.225704] rtl8192_hw_sleep_down(): RF Change in progress!
[ 1027.003864] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[ 1028.540184] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 1028.543549] notify_wx_assoc_event(): Tell user space disconnected
[ 1028.543578] Linking with eduroam,channel:1, qos:1, myHT:0, networkHT:1, mode:10 cur_net.flags:0x40e
[ 1028.543598] Linking with eduroam,channel:6, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 1028.545899] rtllib_associate_procedure_wq(), chan:6
[ 1028.545905] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 1028.556306] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 1031.059937] Linking with eduroam,channel:6, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 1031.059949] rtllib_associate_procedure_wq(), chan:6
[ 1031.059952] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 1031.069996] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 1033.573457] Linking with eduroam,channel:6, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 1033.573468] rtllib_associate_procedure_wq(), chan:6
[ 1033.573471] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 1033.583508] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 1033.802415] =========>what frame??=========>what frame??
[ 1036.086819] Linking with eduroam,channel:6, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 1036.086829] rtllib_associate_procedure_wq(), chan:6
[ 1036.086833] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 1036.096871] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 1038.600150] Linking with eduroam,channel:6, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 1038.656823] ============>sync_scan_hurryup out
[ 1038.656851] rtllib_associate_procedure_wq(), chan:6
[ 1038.656856] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 1038.666898] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 1038.667445] Linking with eduroam,channel:6, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 1038.667461] rtllib_associate_procedure_wq(), chan:6
[ 1038.667464] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 1038.677502] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 1038.677542] Linking with eduroam,channel:6, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 1038.677558] rtllib_associate_procedure_wq(), chan:6
[ 1038.677561] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 1038.687603] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 1041.193458] Linking with eduroam,channel:6, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 1041.193469] rtllib_associate_procedure_wq(), chan:6
[ 1041.193472] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 1041.203509] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 1044.369551] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 1044.369557] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 1044.369560] HW_VAR_MRC: Turn on 1T1R MRC!
[ 1044.657209] =========>what frame??
[ 1045.842064] Linking with eduroam,channel:1, qos:1, myHT:0, networkHT:1, mode:10 cur_net.flags:0x40e
[ 1045.842084] rtllib_associate_procedure_wq(), chan:1
[ 1045.842087] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 1045.852133] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 1045.853930] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 1045.859333] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:2b
[ 1045.859337] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:4f
[ 1045.859340] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:22
[ 1045.859343] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:22
[ 1045.859346] Associated successfully
[ 1045.859348] normal associate
[ 1045.859358] Using G rates:108
[ 1045.859360] Successfully associated, ht enabled
[ 1045.859363] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 1045.864707] RX: IEEE802.1X EAPOL frame!
[ 1045.869401] pHTInfo->bCurBW40MHz is 0
[ 1045.869416] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x100ff005
[ 1051.840275] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[ 1069.003774] disauth packet !
[ 1139.619357] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 1139.619363] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 1139.619366] HW_VAR_MRC: Turn on 1T1R MRC!
[ 1141.095318] Linking with eduroam,channel:1, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[ 1141.095338] rtllib_associate_procedure_wq(), chan:1
[ 1141.095342] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 1141.105414] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 1141.105444] Linking with eduroam,channel:11, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
[ 1141.110821] rtllib_associate_procedure_wq(), chan:11
[ 1141.110826] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 1141.122227] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 1141.123942] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 1141.134531] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:25
[ 1141.134537] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:49
[ 1141.134540] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:1c
[ 1141.134543] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:1c
[ 1141.134546] Associated successfully
[ 1141.134548] normal associate
[ 1141.134558] Using G rates:108
[ 1141.134560] Successfully associated, ht not enabled(0, 0)
[ 1141.134568] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 1141.135772] RX: IEEE802.1X EAPOL frame!
[ 1146.153649] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[ 1160.477186] disauth packet !
[ 1163.771565] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 1163.771571] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 1163.771574] HW_VAR_MRC: Turn on 1T1R MRC!
[ 1163.773523] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1163.928502] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 1163.928510] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 1163.928513] HW_VAR_MRC: Turn on 1T1R MRC!
[ 1168.395192] Linking with eduroam,channel:1, qos:1, myHT:0, networkHT:1, mode:10 cur_net.flags:0x40e
[ 1168.395211] rtllib_associate_procedure_wq(), chan:1
[ 1168.395214] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 1168.405259] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 1168.405333] Linking with eduroam,channel:11, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[ 1168.405648] rtllib_associate_procedure_wq(), chan:11
[ 1168.405652] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 1168.415695] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 1168.469621] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 1168.474214] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:25
[ 1168.474219] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:49
[ 1168.474222] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:1c
[ 1168.474225] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:1c
[ 1168.474228] Associated successfully
[ 1168.474230] normal associate
[ 1168.474240] Using G rates:108
[ 1168.474242] Successfully associated, ht not enabled(0, 0)
[ 1168.474250] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 1168.475512] RX: IEEE802.1X EAPOL frame!
[ 1168.476030] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1168.485757] RX: IEEE802.1X EAPOL frame!
[ 1168.503303] RX: IEEE802.1X EAPOL frame!
[ 1168.522450] RX: IEEE802.1X EAPOL frame!
[ 1168.550796] RX: IEEE802.1X EAPOL frame!
[ 1168.560781] RX: IEEE802.1X EAPOL frame!
[ 1168.579726] RX: IEEE802.1X EAPOL frame!
[ 1168.585341] RX: IEEE802.1X EAPOL frame!
[ 1168.591681] RX: IEEE802.1X EAPOL frame!
[ 1168.600641] RX: IEEE802.1X EAPOL frame!
[ 1168.624042] RX: IEEE802.1X EAPOL frame!
[ 1168.630092] RX: IEEE802.1X EAPOL frame!
[ 1168.637329] RX: IEEE802.1X EAPOL frame!
[ 1168.639154] RX: IEEE802.1X EAPOL frame!
[ 1168.644990] RX: IEEE802.1X EAPOL frame!
[ 1168.645340] alg name:CCMP
[ 1168.645355] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 1168.645962] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 1168.646032] alg name:TKIP
[ 1168.646047] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 1168.646671] set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 1168.690174] DHCP pkt src port:68, dest port:67!!
[ 1175.319728] disauth packet !
[ 1176.816314] Linking with eduroam,channel:1, qos:1, myHT:0, networkHT:1, mode:10 cur_net.flags:0x40e
[ 1176.816334] rtllib_associate_procedure_wq(), chan:1
[ 1176.816338] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 1176.826599] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 1176.826637] Linking with eduroam,channel:1, qos:1, myHT:0, networkHT:1, mode:10 cur_net.flags:0x40e
[ 1176.827728] rtllib_associate_procedure_wq(), chan:1
[ 1176.827733] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 1176.837776] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 1176.839682] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 1176.844920] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:2b
[ 1176.844926] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:4f
[ 1176.844929] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:22
[ 1176.844931] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:22
[ 1176.844935] Associated successfully
[ 1176.844937] normal associate
[ 1176.844948] Using G rates:108
[ 1176.844950] Successfully associated, ht enabled
[ 1176.844953] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 1176.850037] RX: IEEE802.1X EAPOL frame!
[ 1176.854992] pHTInfo->bCurBW40MHz is 0
[ 1176.855006] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x100ff005
[ 1179.150090] wlan0: no IPv6 routers present
[ 1181.826812] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[ 1201.003342] disauth packet !