API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jul 17th, 2014
219
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 23.28 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2014.07-00014-gaae4a2d (Jul 16 2014 - 19:42:04)
  2. reading u-boot.img
  3. reading u-boot.img
  4.  
  5.  
  6. U-Boot 2014.07-00014-gaae4a2d (Jul 16 2014 - 19:42:04), Build: jenkins-github_Bootloader-Builder-366
  7.  
  8. I2C: ready
  9. DRAM: 512 MiB
  10. NAND: 0 MiB
  11. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
  12. *** Warning - readenv() failed, using default environment
  13.  
  14. Net: <ethaddr> not set. Validating first E-fuse MAC
  15. cpsw, usb_ether
  16. Hit any key to stop autoboot: 1  0
  17. gpio: pin 53 (gpio 53) value is 1
  18. switch to partitions #0, OK
  19. mmc0 is current device
  20. gpio: pin 54 (gpio 54) value is 1
  21. SD/MMC found on device 0
  22. Checking for: /uEnv.txt ...
  23. reading uEnv.txt
  24. 129 bytes read in 4 ms (31.3 KiB/s)
  25. gpio: pin 55 (gpio 55) value is 1
  26. Loaded environment from uEnv.txt
  27. Importing environment from mmc ...
  28. Checking if uenvcmd is set ...
  29. Checking if client_ip is set ...
  30. gpio: pin 56 (gpio 56) value is 1
  31. Running nfsboot ...
  32. Booting from 192.168.0.10 ...
  33. cpsw Waiting for PHY auto negotiation to complete. done
  34. link up on port 0, speed 100, full duplex
  35. Using cpsw device
  36. TFTP from server 192.168.0.10; our IP address is 192.168.0.118
  37. Filename 'zImage'.
  38. Load address: 0x82000000
  39. Loading: *#################################################################
  40. #################################################################
  41. #################################################################
  42. #################################################################
  43. #################################################################
  44. #################################################################
  45. #########################################
  46. 3 MiB/s
  47. done
  48. Bytes transferred = 6316000 (605fe0 hex)
  49. link up on port 0, speed 100, full duplex
  50. Using cpsw device
  51. TFTP from server 192.168.0.10; our IP address is 192.168.0.118
  52. Filename 'dtbs/am335x-boneblack.dtb'.
  53. Load address: 0x88000000
  54. Loading: *###
  55. 2.6 MiB/s
  56. done
  57. Bytes transferred = 32288 (7e20 hex)
  58. Kernel image @ 0x82000000 [ 0x000000 - 0x605fe0 ]
  59. ## Flattened Device Tree blob at 88000000
  60. Booting using the fdt blob at 0x88000000
  61. Loading Device Tree to 8fff5000, end 8ffffe1f ... OK
  62.  
  63. Starting kernel ...
  64.  
  65. [ 0.000000] Booting Linux on physical CPU 0x0
  66. [ 0.000000] Initializing cgroup subsys cpuset
  67. [ 0.000000] Initializing cgroup subsys cpu
  68. [ 0.000000] Initializing cgroup subsys cpuacct
  69. [ 0.000000] Linux version 3.15.5-bone5 (root@imx6q-wandboard-2gb-0) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Wed Jul 16 21:41:29 UTC 2014
  70. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
  71. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  72. [ 0.000000] Machine model: TI AM335x BeagleBone
  73. [ 0.000000] Memory policy: Data cache writeback
  74. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  75. [ 0.000000] AM335X ES2.0 (sgx neon )
  76. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
  77. [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/nfs rwrootfstype=ext4 rootwait fixrtc nfsroot=192.168.0.10:/opt/wheezy,vers=3 ip=192.168.0.118:192.168.0.10:192.168.0.1:255.255.255.0::eth0:off
  78. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  79. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  80. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  81. [ 0.000000] allocated 1048576 bytes of page_cgroup
  82. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  83. [ 0.000000] Memory: 506792K/523264K available (5733K kernel code, 592K rwdata, 3136K rodata, 290K init, 979K bss, 16472K reserved, 0K highmem)
  84. [ 0.000000] Virtual kernel memory layout:
  85. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  86. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  87. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  88. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  89. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  90. [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
  91. [ 0.000000] .text : 0xc0008000 - 0xc08b1674 (8870 kB)
  92. [ 0.000000] .init : 0xc08b2000 - 0xc08fab98 ( 291 kB)
  93. [ 0.000000] .data : 0xc08fc000 - 0xc0990108 ( 593 kB)
  94. [ 0.000000] .bss : 0xc0990108 - 0xc0a85064 ( 980 kB)
  95. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  96. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  97. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  98. [ 0.000000] Total of 128 interrupts on 1 active controller
  99. [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
  100. [ 0.000009] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
  101. [ 0.000025] OMAP clocksource: timer1 at 24000000 Hz
  102. [ 0.000172] Console: colour dummy device 80x30
  103. [ 0.000194] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
  104. [ 0.089560] pid_max: default: 32768 minimum: 301
  105. [ 0.089624] Security Framework initialized
  106. [ 0.089686] AppArmor: AppArmor disabled by boot time parameter
  107. [ 0.089691] Yama: becoming mindful.
  108. [ 0.089859] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  109. [ 0.089868] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  110. [ 0.090359] Initializing cgroup subsys memory
  111. [ 0.090383] Initializing cgroup subsys devices
  112. [ 0.090392] Initializing cgroup subsys freezer
  113. [ 0.090400] Initializing cgroup subsys net_cls
  114. [ 0.090406] Initializing cgroup subsys blkio
  115. [ 0.090413] Initializing cgroup subsys perf_event
  116. [ 0.090451] CPU: Testing write buffer coherency: ok
  117. [ 0.090738] Setting up static identity map for 0x80561560 - 0x805615ac
  118. [ 0.093701] devtmpfs: initialized
  119. [ 0.095193] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  120. [ 0.101045] omap_hwmod: tptc0 using broken dt data from edma
  121. [ 0.101114] omap_hwmod: tptc1 using broken dt data from edma
  122. [ 0.101172] omap_hwmod: tptc2 using broken dt data from edma
  123. [ 0.105078] omap_hwmod: debugss: _wait_target_disable failed
  124. [ 0.160440] xor: measuring software checksum speed
  125. [ 0.259534] arm4regs : 1246.800 MB/sec
  126. [ 0.359532] 8regs : 1156.400 MB/sec
  127. [ 0.459533] 32regs : 1114.000 MB/sec
  128. [ 0.559532] neon : 920.400 MB/sec
  129. [ 0.559538] xor: using function: arm4regs (1246.800 MB/sec)
  130. [ 0.559552] pinctrl core: initialized pinctrl subsystem
  131. [ 0.559882] regulator-dummy: no parameters
  132. [ 0.566705] NET: Registered protocol family 16
  133. [ 0.567235] DMA: preallocated 256 KiB pool for atomic coherent allocations
  134. [ 0.567829] cpuidle: using governor ladder
  135. [ 0.567839] cpuidle: using governor menu
  136. [ 0.573662] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
  137. [ 0.574325] platform 49000000.edma: alias fck already exists
  138. [ 0.574341] platform 49000000.edma: alias fck already exists
  139. [ 0.574351] platform 49000000.edma: alias fck already exists
  140. [ 0.574824] OMAP GPIO hardware version 0.1
  141. [ 0.580730] No ATAGs?
  142. [ 0.580743] hw-breakpoint: debug architecture 0x4 unsupported.
  143. [ 0.581585] omap_init_mbox: hwmod doesn't have valid attrs
  144. [ 0.759572] raid6: int32x1 236 MB/s
  145. [ 0.929577] raid6: int32x2 368 MB/s
  146. [ 1.099673] raid6: int32x4 271 MB/s
  147. [ 1.269679] raid6: int32x8 206 MB/s
  148. [ 1.439554] raid6: neonx1 1446 MB/s
  149. [ 1.609559] raid6: neonx2 1846 MB/s
  150. [ 1.779534] raid6: neonx4 824 MB/s
  151. [ 1.949572] raid6: neonx8 333 MB/s
  152. [ 1.949578] raid6: using algorithm neonx2 (1846 MB/s)
  153. [ 1.949583] raid6: using intx1 recovery algorithm
  154. [ 1.955564] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
  155. [ 1.956049] vbat: 5000 mV
  156. [ 1.956254] vmmcsd_fixed: 3300 mV
  157. [ 1.958044] SCSI subsystem initialized
  158. [ 1.958642] usbcore: registered new interface driver usbfs
  159. [ 1.958696] usbcore: registered new interface driver hub
  160. [ 1.958815] usbcore: registered new device driver usb
  161. [ 1.960559] input: tps65217_pwr_but as /devices/ocp.3/44e0b000.i2c/i2c-0/0-0024/input/input0
  162. [ 1.961702] DCDC1: at 1500 mV
  163. [ 1.962472] vdd_mpu: 925 <--> 1325 mV at 1325 mV
  164. [ 1.963211] vdd_core: 925 <--> 1150 mV at 1125 mV
  165. [ 1.963939] LDO1: at 1800 mV
  166. [ 1.964673] LDO2: at 3300 mV
  167. [ 1.965890] LDO3: 1800 mV
  168. [ 1.966622] LDO4: at 3300 mV
  169. [ 1.967302] tps65217 0-0024: TPS65217 ID 0xe version 1.2
  170. [ 1.967742] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
  171. [ 1.969315] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
  172. [ 1.969466] media: Linux media interface: v0.10
  173. [ 1.969515] Linux video capture interface: v2.00
  174. [ 1.969642] pps_core: LinuxPPS API ver. 1 registered
  175. [ 1.969650] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  176. [ 1.969669] PTP clock support registered
  177. [ 1.970728] NetLabel: Initializing
  178. [ 1.970739] NetLabel: domain hash size = 128
  179. [ 1.970744] NetLabel: protocols = UNLABELED CIPSOv4
  180. [ 1.970790] NetLabel: unlabeled traffic allowed by default
  181. [ 1.970972] Switched to clocksource timer1
  182. [ 2.005073] NET: Registered protocol family 2
  183. [ 2.005564] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  184. [ 2.005603] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  185. [ 2.005640] TCP: Hash tables configured (established 4096 bind 4096)
  186. [ 2.005695] TCP: reno registered
  187. [ 2.005704] UDP hash table entries: 256 (order: 0, 4096 bytes)
  188. [ 2.005718] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  189. [ 2.005845] NET: Registered protocol family 1
  190. [ 2.006187] RPC: Registered named UNIX socket transport module.
  191. [ 2.006196] RPC: Registered udp transport module.
  192. [ 2.006200] RPC: Registered tcp transport module.
  193. [ 2.006205] RPC: Registered tcp NFSv4.1 backchannel transport module.
  194. [ 2.006823] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  195. [ 2.008062] futex hash table entries: 256 (order: -1, 3072 bytes)
  196. [ 2.008127] audit: initializing netlink subsys (disabled)
  197. [ 2.008175] audit: type=2000 audit(2.000:1): initialized
  198. [ 2.195012] VFS: Disk quotas dquot_6.5.2
  199. [ 2.195186] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  200. [ 2.196597] NFS: Registering the id_resolver key type
  201. [ 2.196656] Key type id_resolver registered
  202. [ 2.196662] Key type id_legacy registered
  203. [ 2.196677] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  204. [ 2.196901] fuse init (API version 7.23)
  205. [ 2.197220] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
  206. [ 2.198663] msgmni has been set to 989
  207. [ 2.199485] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  208. [ 2.199577] io scheduler noop registered
  209. [ 2.199585] io scheduler deadline registered
  210. [ 2.199630] io scheduler cfq registered (default)
  211. [ 2.203410] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  212. [ 2.205000] omap_uart 44e09000.serial: no wakeirq for uart0
  213. [ 2.205300] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0
  214. [ 3.041401] console [ttyO0] enabled
  215. [ 3.045560] omap_uart 48022000.serial: no wakeirq for uart0
  216. [ 3.051640] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89, base_baud = 3000000) is a OMAP UART1
  217. [ 3.062566] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
  218. [ 3.069663] [drm] Initialized drm 1.1.0 20060810
  219. [ 3.074618] usbcore: registered new interface driver udl
  220. [ 3.080343] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  221. [ 3.087607] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  222. [ 3.094859] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  223. [ 3.102106] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  224. [ 3.109339] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  225. [ 3.121286] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  226. [ 3.128150] ehci-platform: EHCI generic platform driver
  227. [ 3.133778] ehci-omap: OMAP-EHCI Host Controller driver
  228. [ 3.139394] usbcore: registered new interface driver usb-storage
  229. [ 3.146852] 47401300.usb-phy supply vcc not found, using dummy regulator
  230. [ 3.155903] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
  231. [ 3.162201] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1
  232. [ 3.170577] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  233. [ 3.177722] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  234. [ 3.185306] usb usb1: Product: MUSB HDRC host driver
  235. [ 3.190509] usb usb1: Manufacturer: Linux 3.15.5-bone5 musb-hcd
  236. [ 3.196722] usb usb1: SerialNumber: musb-hdrc.0.auto
  237. [ 3.202476] hub 1-0:1.0: USB hub found
  238. [ 3.206436] hub 1-0:1.0: 1 port detected
  239. [ 3.211647] 47401b00.usb-phy supply vcc not found, using dummy regulator
  240. [ 3.220577] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
  241. [ 3.226892] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 2
  242. [ 3.235292] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  243. [ 3.242427] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  244. [ 3.249999] usb usb2: Product: MUSB HDRC host driver
  245. [ 3.255211] usb usb2: Manufacturer: Linux 3.15.5-bone5 musb-hcd
  246. [ 3.261423] usb usb2: SerialNumber: musb-hdrc.1.auto
  247. [ 3.267175] hub 2-0:1.0: USB hub found
  248. [ 3.271155] hub 2-0:1.0: 1 port detected
  249. [ 3.282211] mousedev: PS/2 mouse device common for all mice
  250. [ 3.288400] i2c /dev entries driver
  251. [ 3.292455] IR Sharp protocol handler initialized
  252. [ 3.298430] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  253. [ 3.305937] sdhci: Secure Digital Host Controller Interface driver
  254. [ 3.312434] sdhci: Copyright(c) Pierre Ossman
  255. [ 3.388258] mmc0: host does not support reading read-only switch. assuming write-enable.
  256. [ 3.396973] sdhci-pltfm: SDHCI platform and OF driver helper
  257. [ 3.403709] ledtrig-cpu: registered to indicate activity on CPUs
  258. [ 3.410084] hidraw: raw HID events driver (C) Jiri Kosina
  259. [ 3.416022] mmc0: new high speed SDHC card at address 0007
  260. [ 3.422767] usbcore: registered new interface driver usbhid
  261. [ 3.428609] usbhid: USB HID core driver
  262. [ 3.432842] mmcblk0: mmc0:0007 SD8GB 7.42 GiB
  263. [ 3.438439] ashmem: initialized
  264. [ 3.441949] mmcblk0: p1 p2
  265. [ 3.445842] oprofile: using arm/armv7
  266. [ 3.449867] TCP: cubic registered
  267. [ 3.453817] NET: Registered protocol family 10
  268. [ 3.459801] mip6: Mobile IPv6
  269. [ 3.463004] NET: Registered protocol family 17
  270. [ 3.467744] Key type dns_resolver registered
  271. [ 3.472238] mpls_gso: MPLS GSO support
  272. [ 3.477304] ThumbEE CPU extension supported.
  273. [ 3.481838] Registering SWP/SWPB emulation handler
  274. [ 3.486857] SmartReflex Class3 initialized
  275. [ 3.492712] registered taskstats version 1
  276. [ 3.498745] Btrfs loaded
  277. [ 3.501563] vbat: disabling
  278. [ 3.504517] Error: Driver 'tfp410' is already registered, aborting...
  279. [ 3.554126] mmc1: BKOPS_EN bit is not set
  280. [ 3.560692] mmc1: new high speed MMC card at address 0001
  281. [ 3.566784] mmcblk1: mmc1:0001 MMC02G 1.78 GiB
  282. [ 3.571775] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
  283. [ 3.578102] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
  284. [ 3.585914] mmcblk1: unknown partition table
  285. [ 3.591828] mmcblk1boot1: unknown partition table
  286. [ 3.598157] mmcblk1boot0: unknown partition table
  287. [ 3.633255] tda998x 0-0070: found TDA19988
  288. [ 3.638421] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  289. [ 3.645373] [drm] No driver support for vblank timestamp query.
  290. [ 3.651899] tilcdc 4830e000.lcdc: No connectors reported connected with modes
  291. [ 3.659388] [drm] Cannot find any crtc or sizes - going 1024x768
  292. [ 3.674829] Console: switching to colour frame buffer device 128x48
  293. [ 3.687444] tilcdc 4830e000.lcdc: fb0: frame buffer device
  294. [ 3.693295] tilcdc 4830e000.lcdc: registered panic notifier
  295. [ 3.699145] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
  296. [ 3.761047] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
  297. [ 3.767447] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
  298. [ 3.774643] usb 2-1: new high-speed USB device number 2 using musb-hdrc
  299. [ 3.782145] libphy: 4a101000.mdio: probed
  300. [ 3.786358] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
  301. [ 3.796520] Detected MACID = 90:59:af:5c:d4:7a
  302. [ 3.802120] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  303. [ 3.808695] sr_init: No PMIC hook to init smartreflex
  304. [ 3.814159] sr_init: platform driver register failed for SR
  305. [ 3.822743] net eth0: initializing cpsw version 1.12 (0)
  306. [ 3.901823] net eth0: phy found : id is : 0x7c0f1
  307. [ 3.906816] libphy: PHY 4a101000.mdio:01 not found
  308. [ 3.911858] net eth0: phy 4a101000.mdio:01 not found on slave 1
  309. [ 3.919108] net eth0: BQL enabled
  310. [ 3.928246] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  311. [ 3.952138] usb 2-1: New USB device found, idVendor=05e3, idProduct=0606
  312. [ 3.959167] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  313. [ 3.966662] usb 2-1: Product: USB2.0 Hub
  314. [ 3.971622] hub 2-1:1.0: USB hub found
  315. [ 3.975806] hub 2-1:1.0: 4 ports detected
  316. [ 6.981599] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
  317. [ 6.991008] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  318. [ 7.011310] IP-Config: Complete:
  319. [ 7.014702] device=eth0, hwaddr=90:59:af:5c:d4:7a, ipaddr=192.168.0.118, mask=255.255.255.0, gw=192.168.0.1
  320. [ 7.025393] host=192.168.0.118, domain=, nis-domain=(none)
  321. [ 7.031609] bootserver=192.168.0.10, rootserver=192.168.0.10, rootpath=
  322. [ 7.045188] VFS: Mounted root (nfs filesystem) readonly on device 0:14.
  323. [ 7.052825] devtmpfs: mounted
  324. [ 7.056245] Freeing unused kernel memory: 288K (c08b2000 - c08fa000)
  325.  
  326. INIT: version 2.88 booting
  327.  
  328. [info] Using makefile-style concurrent boot in runlevel S.
  329. [....] Starting the hotplug events dispatcher: udevd[ 8.992533] udevd[188]: starting version 175
  330. [ 9.095720] random: nonblocking pool is initialized
  331. [?25l[?1c7[ ok 8[?25h[?0c.
  332. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone.
  333. [....] Waiting for /dev to be fully populated...[ 9.686980] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
  334. [ 9.694547] 44e3e000.rtc: already running
  335. [ 10.411705] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
  336. [ 10.451710] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
  337. [?25l[?1c7[ ok 8[?25h[?0cdone.
  338. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone.
  339. [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c.
  340. [info] Loading kernel module mt7601Usta.
  341. FATAL: Module mt7601Usta not found.
  342. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone.
  343. [....] Checking file systems...fsck from util-linux 2.20.1
  344. [?25l[?1c7[ ok 8[?25h[?0cdone.
  345. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone.
  346. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone.
  347. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c.
  348. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone.
  349. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2
  350. Copyright 2004-2011 Internet Systems Consortium.
  351. All rights reserved.
  352. For info, please visit https://www.isc.org/software/dhcp/
  353.  
  354. Listening on LPF/eth0/90:59:af:5c:d4:7a
  355. Sending on LPF/eth0/90:59:af:5c:d4:7a
  356. Sending on Socket/fallback
  357. DHCPREQUEST on eth0 to 255.255.255.255 port 67
  358. DHCPACK from 192.168.0.1
  359. RTNETLINK answers: File exists
  360. bound to 192.168.0.118 -- renewal in 10215 seconds.
  361. [?25l[?1c7[ ok 8[?25h[?0cdone.
  362. [....] Starting rpcbind daemon...[?25l[?1c7[ ok 8[?25h[?0c.
  363. [....] Starting NFS common utilities: statd[ 20.838530] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  364. idmapd[?25l[?1c7[ ok 8[?25h[?0c.
  365. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c.
  366.  
  367. INIT: Entering runlevel: 2
  368.  
  369. [info] Using makefile-style concurrent boot in runlevel 2.
  370. Thu Jul 17 13:35:00 UTC 2014
  371. [....] Starting NFS common utilities: statd idmapd[?25l[?1c7[ ok 8[?25h[?0c.
  372. [....] Starting rpcbind daemon...[....] Already running.[?25l[?1c7[ ok 8[?25h[?0c.
  373. [....] Starting enhanced syslogd: rsyslogd[ 23.578285] using random self ethernet address
  374. [ 23.583027] using random host ethernet address
  375. [ 23.587688] using host ethernet address: 90:59:AF:5C:D4:7C
  376. [ 23.593288] using random self ethernet address
  377. [ 23.598131] using random host ethernet address
  378. [ 23.602798] using host ethernet address: 90:59:AF:5C:D4:7C
  379. [ 23.609095] usb0: HOST MAC 90:59:af:5c:d4:7c
  380. [ 23.613876] usb0: MAC b2:a4:cc:29:86:6f
  381. [ 23.676610] Number of LUNs=8
  382. [ 23.679710] Mass Storage Function, version: 2009/09/11
  383. [ 23.685155] LUN: removable file: (no medium)
  384. [ 23.689645] Number of LUNs=1
  385. [ 23.692821] LUN: removable file: /dev/mmcblk0p1
  386. [ 23.697571] Number of LUNs=1
  387. [ 23.709993] g_multi gadget: Multifunction Composite Gadget
  388. [ 23.715944] g_multi gadget: g_multi ready
  389. [?25l[?1c7[ ok 8[?25h[?0c.
  390. [....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c.
  391. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[ ok 8[?25h[?0c.
  392.  
  393. Debian GNU/Linux 7 beaglebone ttyO0
  394.  
  395. default username:password is [debian:temppwd]
  396.  
  397. Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian
  398.  
  399. The IP Address for eth0 is: 192.168.0.118
  400. beaglebone login: debian
  401. Password:
  402. Last login: Thu Jul 17 13:35:09 UTC 2014 on ttyO0
  403. Linux beaglebone 3.15.5-bone5 #1 Wed Jul 16 21:41:29 UTC 2014 armv7l
  404.  
  405. The programs included with the Debian GNU/Linux system are free software;
  406. the exact distribution terms for each program are described in the
  407. individual files in /usr/share/doc/*/copyright.
  408.  
  409. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
  410. permitted by applicable law.
  411. debian@beaglebone:~$ mount
  412. 192.168.0.10:/opt/wheezy on / type nfs (rw,relatime,vers=3,rsize=4096,wsize=4096,namlen=255,hard,nolock,proto=udp,timeo=11,retrans=3,sec=sys,mountaddr=192.168.0.10,mountvers=3,mountproto=udp,local_lock=all,addr=192.168.0.10)
  413. devtmpfs on /dev type devtmpfs (rw,relatime,size=253396k,nr_inodes=63349,mode=755)
  414. tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=50708k,mode=755)
  415. tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
  416. proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
  417. sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
  418. tmpfs on /run/shm type tmpfs (rw,nosuid,nodev,noexec,relatime,size=101400k)
  419. devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
  420. debugfs on /sys/kernel/debug type debugfs (rw,relatime)
  421. rpc_pipefs on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw,relatime)
  422. debian@beaglebone:~$ uname -r
  423. 3.15.5-bone5
  424. debian@beaglebone:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!