API tools faq
paste
Advertisement
Guest User

Minnowboard Max booting from U-Boot

a guest
Apr 22nd, 2016
100
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.45 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2016.03-00002-g13d5819 (Apr 19 2016 - 14:02:04 +0200)
  2.  
  3. CPU: x86_64, vendor Intel, device 30679h
  4. DRAM: 2 GiB
  5. MMC: ValleyView SDHCI: 0, ValleyView SDHCI: 1
  6. SF: Detected N25Q64A with page size 256 Bytes, erase size 4 KiB, total 8 MiB
  7. Video: 1280x1024x16
  8. Model: Intel Minnowboard Max
  9. SCSI: SATA link 0 timeout.
  10. SATA link 1 timeout.
  11. AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
  12. flags: 64bit ncq stag pm led clo pio slum part sxs
  13. scanning bus for devices...
  14. Found 0 device(s).
  15. Net: eth0: eth_rtl8169
  16. Hit any key to stop autoboot: 2  1  0
  17. reading vmlinuz
  18. 1811232 bytes read in 54 ms (32 MiB/s)
  19. Valid Boot Flag
  20. Setup Size = 0x00004000
  21. Magic signature found
  22. Using boot protocol version 2.0d
  23. Linux kernel version 4.1.8-rt8-yocto-develop (visdap@ubuntu) #1 SMP PREEMPT RT Fri Apr 15 15:32:35 CEST 2016
  24. Building boot_params at 0x00090000
  25. Loading bzImage at address 100000 (1794848 bytes)
  26. Magic signature found
  27. Kernel command line: "root=/dev/mmcblk0p2 rw rootwait ip=192.168.0.130:::255.255.255.0:MinnowboardMax:eth0::: console=ttyS0,115200"
  28.  
  29. Starting kernel ...
  30.  
  31. Timer summary in microseconds:
  32. Mark Elapsed Stage
  33. 0 0 reset
  34. 211,529 211,529 board_init_r
  35. 2,563,428 2,351,899 id=64
  36. 2,563,632 204 id=65
  37. 2,569,341 5,709 main_loop
  38. 4,843,723 2,274,382 start_kernel
  39.  
  40. Accumulated time:
  41. 465,011 ahci
  42. 1,751,841 vesa display
  43. ** 6 printk messages dropped ** BIOS-e820: [mem 0x000000007b600000-0x000000007fffffff] reserved
  44. BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
  45. NX (Execute Disable) protection: active
  46. e820: last_pfn = 0x7b600 max_arch_pfn = 0x400000000
  47. init_memory_mapping: [mem 0x00000000-0x000fffff]
  48. init_memory_mapping: [mem 0x7b400000-0x7b5fffff]
  49. init_memory_mapping: [mem 0x60000000-0x7b3fffff]
  50. init_memory_mapping: [mem 0x40000000-0x5fffffff]
  51. init_memory_mapping: [mem 0x00100000-0x3fffffff]
  52. ACPI: Early table checksum verification disabled
  53. ACPI BIOS Error (bug): A valid RSDP was not found (20150410/tbxfroot-243)
  54. Zone ranges:
  55. DMA32 [mem 0x0000000000001000-0x000000007b5fffff]
  56. Normal empty
  57. Movable zone start for each node
  58. Early memory node ranges
  59. node 0: [mem 0x0000000000001000-0x000000000009ffff]
  60. node 0: [mem 0x0000000000100000-0x000000007b5fffff]
  61. Initmem setup node 0 [mem 0x0000000000001000-0x000000007b5fffff]
  62. x86/hpet: Will disable the HPET for this platform because it's not reliable
  63. Reserving Intel graphics stolen memory at 0x7c000000-0x7fffffff
  64. smpboot: Allowing 1 CPUs, 0 hotplug CPUs
  65. e820: [mem 0x80000000-0xdfffffff] available for PCI devices
  66. clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
  67. setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
  68. PERCPU: Embedded 26 pages/cpu @ffff88007b200000 s77120 r0 d29376 u2097152
  69. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 497240
  70. Kernel command line: root=/dev/mmcblk0p2 rw rootwait ip=192.168.0.130:::255.255.255.0:MinnowboardMax:eth0::: console=ttyS0,115200
  71. PID hash table entries: 4096 (order: 3, 32768 bytes)
  72. Dentry cache hash table entries: 262144 (order: 10, 4194304 bytes)
  73. Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  74. Memory: 1978288K/2020988K available (2425K kernel code, 266K rwdata, 420K rodata, 584K init, 340K bss, 42700K reserved, 0K cma-reserved)
  75. SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  76. Preemptible hierarchical RCU implementation.
  77. CONFIG_RCU_FANOUT set to non-default value of 3
  78. Four-level hierarchy is enabled.
  79. Build-time adjustment of leaf fanout to 2.
  80. RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
  81. RCU: Adjusting geometry for rcu_fanout_leaf=2, nr_cpu_ids=1
  82. NR_IRQS:4352 nr_irqs:24 16
  83. Console: colour dummy device 80x25
  84. console [ttyS0] enabled
  85. Maximum core-clock to bus-clock ratio: 0xa
  86. Resolved frequency ID: 2, frequency: 133200 KHz
  87. TSC runs at 1332000 KHz
  88. lapic_timer_frequency = 133200
  89. tsc: Detected 1332.000 MHz processor
  90. Calibrating delay loop (skipped), value calculated using timer frequency.. 2664.00 BogoMIPS (lpj=1332000)
  91. pid_max: default: 4096 minimum: 301
  92. Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  93. Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  94. CPU: Physical Processor ID: 0
  95. CPU: Processor Core ID: 0
  96. ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
  97. ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
  98. process: using mwait in idle threads
  99. Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
  100. Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
  101. Freeing SMP alternatives memory: 12K (ffffffff8139f000 - ffffffff813a2000)
  102. smpboot: weird, boot CPU (#0) not listed by the BIOS
  103. smpboot: SMP motherboard not detected
  104. smpboot: SMP disabled
  105. Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
  106. ... version: 3
  107. ... bit width: 40
  108. ... generic registers: 2
  109. ... value mask: 000000ffffffffff
  110. ... max period: 000000ffffffffff
  111. ... fixed-purpose events: 3
  112. ... event mask: 0000000700000003
  113. x86: Booted up 1 node, 1 CPUs
  114. smpboot: Total of 1 processors activated (2664.00 BogoMIPS)
  115. devtmpfs: initialized
  116. clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  117. NET: Registered protocol family 16
  118. PCI: Using configuration type 1 for base access
  119. ACPI: Interpreter disabled.
  120. PCI: Probing PCI hardware
  121. PCI host bridge to bus 0000:00
  122. pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
  123. pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
  124. pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  125. pci 0000:00:1c.0: PCI bridge to [bus 01]
  126. pci 0000:00:1c.1: PCI bridge to [bus 02]
  127. pci 0000:00:1c.2: PCI bridge to [bus 03]
  128. pci 0000:00:1c.3: PCI bridge to [bus 04]
  129. pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:0f1c]
  130. Switched to clocksource refined-jiffies
  131. pnp: PnP ACPI: disabled
  132. pci 0000:00:1c.0: BAR 8: assigned [mem 0x80b00000-0x80cfffff]
  133. pci 0000:00:1c.0: BAR 9: assigned [mem 0x100000000-0x1001fffff 64bit pref]
  134. pci 0000:00:1c.1: BAR 8: assigned [mem 0x80d00000-0x80efffff]
  135. pci 0000:00:1c.1: BAR 9: assigned [mem 0x100200000-0x1003fffff 64bit pref]
  136. pci 0000:00:1c.3: BAR 8: assigned [mem 0x80f00000-0x810fffff]
  137. pci 0000:00:1c.3: BAR 9: assigned [mem 0x100400000-0x1005fffff 64bit pref]
  138. pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
  139. pci 0000:00:1c.1: BAR 7: assigned [io 0x5000-0x5fff]
  140. pci 0000:00:1c.3: BAR 7: assigned [io 0x6000-0x6fff]
  141. pci 0000:00:1c.0: PCI bridge to [bus 01]
  142. pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
  143. pci 0000:00:1c.0: bridge window [mem 0x80b00000-0x80cfffff]
  144. pci 0000:00:1c.0: bridge window [mem 0x100000000-0x1001fffff 64bit pref]
  145. pci 0000:00:1c.1: PCI bridge to [bus 02]
  146. pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
  147. pci 0000:00:1c.1: bridge window [mem 0x80d00000-0x80efffff]
  148. pci 0000:00:1c.1: bridge window [mem 0x100200000-0x1003fffff 64bit pref]
  149. pci 0000:00:1c.2: PCI bridge to [bus 03]
  150. pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
  151. pci 0000:00:1c.2: bridge window [mem 0x80900000-0x809fffff]
  152. pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
  153. pci 0000:00:1c.3: PCI bridge to [bus 04]
  154. pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
  155. pci 0000:00:1c.3: bridge window [mem 0x80f00000-0x810fffff]
  156. pci 0000:00:1c.3: bridge window [mem 0x100400000-0x1005fffff 64bit pref]
  157. NET: Registered protocol family 2
  158. TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  159. TCP bind hash table entries: 16384 (order: 7, 917504 bytes)
  160. TCP: Hash tables configured (established 16384 bind 16384)
  161. UDP hash table entries: 1024 (order: 5, 131072 bytes)
  162. UDP-Lite hash table entries: 1024 (order: 5, 131072 bytes)
  163. NET: Registered protocol family 1
  164. platform rtc_cmos: registered platform RTC device (no PNP device found)
  165. futex hash table entries: 16 (order: -1, 2048 bytes)
  166. io scheduler noop registered (default)
  167. Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  168. serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
  169. loop: module loaded
  170. r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  171. pci 0000:00:1c.2: found PCI INT C -> IRQ 1
  172. pci 0000:00:18.1: IRQ routing conflict: have IRQ 7, want IRQ 1
  173. pci 0000:00:18.5: IRQ routing conflict: have IRQ 7, want IRQ 1
  174. pci 0000:00:1c.2: IRQ routing conflict: have IRQ 7, want IRQ 1
  175. r8169 0000:03:00.0: IRQ routing conflict: have IRQ 7, want IRQ 1
  176. r8169 0000:03:00.0: found PCI INT A -> IRQ 1
  177. pci 0000:00:18.1: IRQ routing conflict: have IRQ 7, want IRQ 1
  178. pci 0000:00:18.5: IRQ routing conflict: have IRQ 7, want IRQ 1
  179. pci 0000:00:1c.2: IRQ routing conflict: have IRQ 7, want IRQ 1
  180. r8169 0000:03:00.0: IRQ routing conflict: have IRQ 7, want IRQ 1
  181. r8169 0000:03:00.0 (unnamed net_device) (uninitialized): Mem-Wr-Inval unavailable
  182. r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90000002000, 00:13:20:fe:57:6a, XID 0c000800 IRQ 7
  183. r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
  184. sdhci: Secure Digital Host Controller Interface driver
  185. sdhci: Copyright(c) Pierre Ossman
  186. sdhci-pci 0000:00:11.0: SDHCI controller found [8086:0f15] (rev 11)
  187. sdhci-pci 0000:00:11.0: assigned PCI INT A -> IRQ 5
  188. sdhci-pci 0000:00:11.0: sharing IRQ 5 with 0000:00:02.0
  189. sdhci-pci 0000:00:11.0: sharing IRQ 5 with 0000:00:12.0
  190. sdhci-pci 0000:00:11.0: sharing IRQ 5 with 0000:00:13.0
  191. sdhci-pci 0000:00:11.0: sharing IRQ 5 with 0000:00:15.0
  192. sdhci-pci 0000:00:11.0: sharing IRQ 5 with 0000:00:18.0
  193. sdhci-pci 0000:00:11.0: sharing IRQ 5 with 0000:00:18.4
  194. sdhci-pci 0000:00:11.0: sharing IRQ 5 with 0000:00:1c.0
  195. sdhci-pci 0000:00:11.0: sharing IRQ 5 with 0000:00:1d.0
  196. sdhci-pci 0000:00:11.0: sharing IRQ 5 with 0000:00:1e.0
  197. sdhci-pci 0000:00:11.0: No vmmc regulator found
  198. sdhci-pci 0000:00:11.0: No vqmmc regulator found
  199. mmc0: SDHCI controller on PCI [0000:00:11.0] using ADMA
  200. sdhci-pci 0000:00:12.0: SDHCI controller found [8086:0f16] (rev 11)
  201. sdhci-pci 0000:00:12.0: assigned PCI INT A -> IRQ 5
  202. sdhci-pci 0000:00:12.0: sharing IRQ 5 with 0000:00:02.0
  203. sdhci-pci 0000:00:12.0: sharing IRQ 5 with 0000:00:11.0
  204. sdhci-pci 0000:00:12.0: sharing IRQ 5 with 0000:00:13.0
  205. sdhci-pci 0000:00:12.0: sharing IRQ 5 with 0000:00:15.0
  206. sdhci-pci 0000:00:12.0: sharing IRQ 5 with 0000:00:18.0
  207. sdhci-pci 0000:00:12.0: sharing IRQ 5 with 0000:00:18.4
  208. sdhci-pci 0000:00:12.0: sharing IRQ 5 with 0000:00:1c.0
  209. sdhci-pci 0000:00:12.0: sharing IRQ 5 with 0000:00:1d.0
  210. sdhci-pci 0000:00:12.0: sharing IRQ 5 with 0000:00:1e.0
  211. sdhci-pci 0000:00:12.0: failed to setup card detect gpio
  212. sdhci-pci 0000:00:12.0: No vmmc regulator found
  213. sdhci-pci 0000:00:12.0: No vqmmc regulator found
  214. mmc1: SDHCI controller on PCI [0000:00:12.0] using ADMA
  215. NET: Registered protocol family 17
  216. r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2
  217. r8169 0000:03:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-2)
  218. r8169 0000:03:00.0 eth0: link down
  219. r8169 0000:03:00.0 eth0: link down
  220. clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x1333333ae14, max_idle_ns: 440795264474 ns
  221. Switched to clocksource tsc
  222. r8169 0000:03:00.0 eth0: link up
  223. IP-Config: Complete:
  224. device=eth0, hwaddr=00:13:20:fe:57:6a, ipaddr=192.168.0.130, mask=255.255.255.0, gw=255.255.255.255
  225. host=MinnowboardMax, domain=, nis-domain=(none)
  226. bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
  227. Waiting for root device /dev/mmcblk0p2...
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!