Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 18.476]
- X.Org X Server 1.13.4
- Release Date: 2013-04-17
- [ 18.477] X Protocol Version 11, Revision 0
- [ 18.477] Build Operating System: Linux 3.10.1 i686 Gentoo
- [ 18.477] Current Operating System: Linux inspiron_500m 3.10.1 #4 PREEMPT Sun Jul 21 07:14:28 CEST 2013 i686
- [ 18.477] Kernel command line: auto BOOT_IMAGE=3.10.1_opt ro root=801
- [ 18.477] Build Date: 22 July 2013 02:14:14AM
- [ 18.477]
- [ 18.477] Current version of pixman: 0.28.0
- [ 18.477] Before reporting problems, check http://wiki.x.org
- to make sure that you have the latest version.
- [ 18.477] Markers: (--) probed, (**) from config file, (==) default setting,
- (++) from command line, (!!) notice, (II) informational,
- (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
- [ 18.477] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 22 09:31:37 2013
- [ 18.621] (==) Using config directory: "/etc/X11/xorg.conf.d"
- [ 18.621] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
- [ 18.675] (==) No Layout section. Using the first Screen section.
- [ 18.675] (==) No screen section available. Using defaults.
- [ 18.675] (**) |-->Screen "Default Screen Section" (0)
- [ 18.675] (**) | |-->Monitor "<default monitor>"
- [ 18.702] (==) No monitor specified for screen "Default Screen Section".
- Using a default monitor configuration.
- [ 18.702] (==) Automatically adding devices
- [ 18.702] (==) Automatically enabling devices
- [ 18.702] (==) Automatically adding GPU devices
- [ 18.781] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
- [ 18.781] Entry deleted from font path.
- [ 18.781] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
- [ 18.781] Entry deleted from font path.
- [ 18.781] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
- [ 18.781] Entry deleted from font path.
- [ 18.781] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
- [ 18.781] Entry deleted from font path.
- [ 18.781] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
- [ 18.781] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
- [ 18.781] Entry deleted from font path.
- [ 18.781] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
- [ 18.781] (==) FontPath set to:
- /usr/share/fonts/misc/
- [ 18.781] (==) ModulePath set to "/usr/lib/xorg/modules"
- [ 18.781] (II) The server relies on udev to provide the list of input devices.
- If no devices become available, reconfigure udev or disable AutoAddDevices.
- [ 18.814] (II) Loader magic: 0x8269620
- [ 18.814] (II) Module ABI versions:
- [ 18.814] X.Org ANSI C Emulation: 0.4
- [ 18.814] X.Org Video Driver: 13.1
- [ 18.814] X.Org XInput driver : 18.0
- [ 18.814] X.Org Server Extension : 7.0
- [ 18.815] (II) config/udev: Adding drm device (/dev/dri/card0)
- [ 18.817] (--) PCI:*(0:0:2:0) 8086:3582:1028:0153 rev 2, Mem @ 0xf0000000/134217728, 0xfaf80000/524288, I/O @ 0x0000c000/8
- [ 18.817] (--) PCI: (0:0:2:1) 8086:3582:1028:0153 rev 2, Mem @ 0xe8000000/134217728, 0xfaf00000/524288
- [ 18.817] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
- [ 18.822] Initializing built-in extension Generic Event Extension
- [ 18.822] Initializing built-in extension SHAPE
- [ 18.822] Initializing built-in extension MIT-SHM
- [ 18.822] Initializing built-in extension XInputExtension
- [ 18.822] Initializing built-in extension XTEST
- [ 18.822] Initializing built-in extension BIG-REQUESTS
- [ 18.822] Initializing built-in extension SYNC
- [ 18.822] Initializing built-in extension XKEYBOARD
- [ 18.822] Initializing built-in extension XC-MISC
- [ 18.822] Initializing built-in extension XINERAMA
- [ 18.822] Initializing built-in extension XFIXES
- [ 18.822] Initializing built-in extension RENDER
- [ 18.822] Initializing built-in extension RANDR
- [ 18.822] Initializing built-in extension COMPOSITE
- [ 18.822] Initializing built-in extension DAMAGE
- [ 18.822] Initializing built-in extension MIT-SCREEN-SAVER
- [ 18.822] Initializing built-in extension DOUBLE-BUFFER
- [ 18.822] Initializing built-in extension RECORD
- [ 18.822] Initializing built-in extension DPMS
- [ 18.822] Initializing built-in extension X-Resource
- [ 18.822] Initializing built-in extension XVideo
- [ 18.822] Initializing built-in extension XVideo-MotionCompensation
- [ 18.822] Initializing built-in extension XFree86-VidModeExtension
- [ 18.822] Initializing built-in extension XFree86-DGA
- [ 18.822] Initializing built-in extension XFree86-DRI
- [ 18.822] Initializing built-in extension DRI2
- [ 18.822] (II) LoadModule: "glx"
- [ 18.982] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
- [ 19.038] (II) Module glx: vendor="X.Org Foundation"
- [ 19.038] compiled for 1.13.4, module version = 1.0.0
- [ 19.038] ABI class: X.Org Server Extension, version 7.0
- [ 19.038] (==) AIGLX enabled
- [ 19.038] Loading extension GLX
- [ 19.038] (==) Matched intel as autoconfigured driver 0
- [ 19.038] (==) Matched intel as autoconfigured driver 1
- [ 19.038] (==) Matched vesa as autoconfigured driver 2
- [ 19.038] (==) Matched modesetting as autoconfigured driver 3
- [ 19.038] (==) Matched fbdev as autoconfigured driver 4
- [ 19.038] (==) Assigned the driver to the xf86ConfigLayout
- [ 19.038] (II) LoadModule: "intel"
- [ 19.038] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
- [ 19.091] (II) Module intel: vendor="X.Org Foundation"
- [ 19.091] compiled for 1.13.4, module version = 2.20.13
- [ 19.091] Module class: X.Org Video Driver
- [ 19.091] ABI class: X.Org Video Driver, version 13.1
- [ 19.091] (II) LoadModule: "vesa"
- [ 19.134] (WW) Warning, couldn't open module vesa
- [ 19.134] (II) UnloadModule: "vesa"
- [ 19.134] (II) Unloading vesa
- [ 19.134] (EE) Failed to load module "vesa" (module does not exist, 0)
- [ 19.134] (II) LoadModule: "modesetting"
- [ 19.134] (WW) Warning, couldn't open module modesetting
- [ 19.134] (II) UnloadModule: "modesetting"
- [ 19.134] (II) Unloading modesetting
- [ 19.134] (EE) Failed to load module "modesetting" (module does not exist, 0)
- [ 19.134] (II) LoadModule: "fbdev"
- [ 19.135] (WW) Warning, couldn't open module fbdev
- [ 19.135] (II) UnloadModule: "fbdev"
- [ 19.135] (II) Unloading fbdev
- [ 19.135] (EE) Failed to load module "fbdev" (module does not exist, 0)
- [ 19.135] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
- i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
- E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
- 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
- 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
- Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
- Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
- Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
- Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
- Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
- Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
- Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
- Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
- Haswell Server (GT2+), Haswell SDV Desktop (GT1),
- Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
- Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
- Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
- Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
- Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
- Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
- Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
- Haswell ULT Server (GT1), Haswell ULT Server (GT2),
- Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
- Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
- Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
- Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
- Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
- ValleyView PO board
- [ 19.136] (++) using VT number 7
- [ 19.141] (II) intel(0): using device path '/dev/dri/card0'
- [ 19.169] (II) intel(0): Creating default Display subsection in Screen section
- "Default Screen Section" for depth/fbbpp 24/32
- [ 19.169] (==) intel(0): Depth 24, (--) framebuffer bpp 32
- [ 19.169] (==) intel(0): RGB weight 888
- [ 19.169] (==) intel(0): Default visual is TrueColor
- [ 19.169] (--) intel(0): Integrated Graphics Chipset: Intel(R) 852GM/855GM
- [ 19.170] (**) intel(0): Framebuffer tiled
- [ 19.170] (**) intel(0): Pixmaps tiled
- [ 19.170] (**) intel(0): 3D buffers tiled
- [ 19.170] (**) intel(0): Throttling enabled
- [ 19.170] (**) intel(0): Delayed flush enabled
- [ 19.170] (**) intel(0): "Tear free" disabled
- [ 19.170] (**) intel(0): Forcing per-crtc-pixmaps? no
- [ 19.170] (II) intel(0): Output LVDS1 has no monitor section
- [ 19.352] (II) intel(0): Output VGA1 has no monitor section
- [ 19.396] (II) intel(0): Output DVI1 has no monitor section
- [ 19.396] (II) intel(0): EDID for output LVDS1
- [ 19.396] (II) intel(0): Manufacturer: SEC Model: 4258 Serial#: 0
- [ 19.396] (II) intel(0): Year: 2003 Week: 0
- [ 19.396] (II) intel(0): EDID Version: 1.3
- [ 19.396] (II) intel(0): Digital Display Input
- [ 19.396] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 21
- [ 19.396] (II) intel(0): Gamma: 2.20
- [ 19.396] (II) intel(0): No DPMS capabilities specified
- [ 19.396] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
- [ 19.396] (II) intel(0): First detailed timing is preferred mode
- [ 19.396] (II) intel(0): redX: 0.595 redY: 0.340 greenX: 0.320 greenY: 0.550
- [ 19.396] (II) intel(0): blueX: 0.155 blueY: 0.130 whiteX: 0.315 whiteY: 0.330
- [ 19.396] (II) intel(0): Manufacturer's mask: 0
- [ 19.396] (II) intel(0): Supported detailed timing:
- [ 19.396] (II) intel(0): clock: 65.0 MHz Image Size: 286 x 214 mm
- [ 19.396] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
- [ 19.396] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
- [ 19.396] (II) intel(0): Unknown vendor-specific block f
- [ 19.396] (II) intel(0): 6J5644141XB
- [ 19.396] (II) intel(0): àÐÀ¶}P
- [ 19.396] (II) intel(0): EDID (in hex):
- [ 19.396] (II) intel(0): 00ffffffffffff004ca3584200000000
- [ 19.396] (II) intel(0): 000d0103801d15780a43de9857528c27
- [ 19.396] (II) intel(0): 21505400000001010101010101010101
- [ 19.396] (II) intel(0): 01010101010164190040410026301888
- [ 19.396] (II) intel(0): 36001ed6100000190000000f00000000
- [ 19.396] (II) intel(0): 000000000003160e3200000000fe0036
- [ 19.396] (II) intel(0): 4a3536343431343158420a20000000fe
- [ 19.396] (II) intel(0): 00e0d0c0b69b7d500001000a2020001d
- [ 19.396] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
- [ 19.396] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
- [ 19.397] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
- [ 19.397] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
- [ 19.397] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
- [ 19.397] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
- [ 19.397] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
- [ 19.397] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
- [ 19.397] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
- [ 19.397] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
- [ 19.397] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
- [ 19.397] (II) intel(0): Printing probed modes for output LVDS1
- [ 19.397] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
- [ 19.397] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
- [ 19.397] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
- [ 19.397] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
- [ 19.579] (II) intel(0): EDID for output VGA1
- [ 19.623] (II) intel(0): EDID for output DVI1
- [ 19.623] (II) intel(0): Output LVDS1 connected
- [ 19.623] (II) intel(0): Output VGA1 disconnected
- [ 19.623] (II) intel(0): Output DVI1 disconnected
- [ 19.623] (II) intel(0): Using exact sizes for initial modes
- [ 19.623] (II) intel(0): Output LVDS1 using initial mode 1024x768
- [ 19.623] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
- [ 19.623] (==) intel(0): DPI set to (96, 96)
- [ 19.623] (II) Loading sub module "dri2"
- [ 19.623] (II) LoadModule: "dri2"
- [ 19.623] (II) Module "dri2" already built-in
- [ 19.623] (==) Depth 24 pixmap format is 32 bpp
- [ 19.676] (II) intel(0): SNA initialized with gen2 backend
- [ 19.676] (==) intel(0): Backing store disabled
- [ 19.676] (==) intel(0): Silken mouse enabled
- [ 19.676] (II) intel(0): HW Cursor enabled
- [ 19.676] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
- [ 19.698] (==) intel(0): DPMS enabled
- [ 19.698] (WW) intel(0): Textured video not supported on this hardware
- [ 19.715] (II) intel(0): [DRI2] Setup complete
- [ 19.715] (II) intel(0): [DRI2] DRI driver: i915
- [ 19.715] (II) intel(0): direct rendering: DRI2 Enabled
- [ 19.715] (==) intel(0): hotplug detection: "enabled"
- [ 19.715] (--) RandR disabled
- [ 20.327] (EE) AIGLX error: Calling driver entry point failed
- [ 20.327] (EE) AIGLX: reverting to software rendering
- [ 20.327] (II) AIGLX: Screen 0 is not DRI capable
- [ 20.980] (II) AIGLX: Loaded and initialized swrast
- [ 20.982] (II) GLX: Initialized DRISWRAST GL provider for screen 0
- [ 21.043] (II) intel(0): switch to mode 1024x768 on crtc 4 (pipe 1)
- [ 21.060] (II) intel(0): Setting screen physical size to 270 x 203
- [ 21.769] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
- [ 21.769] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
- [ 21.769] (**) Video Bus: Applying InputClass "keyboard-all"
- [ 21.769] (II) LoadModule: "evdev"
- [ 21.770] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
- [ 21.815] (II) Module evdev: vendor="X.Org Foundation"
- [ 21.815] compiled for 1.13.4, module version = 2.7.3
- [ 21.815] Module class: X.Org XInput Driver
- [ 21.815] ABI class: X.Org XInput driver, version 18.0
- [ 21.815] (II) Using input driver 'evdev' for 'Video Bus'
- [ 21.815] (**) Video Bus: always reports core events
- [ 21.815] (**) evdev: Video Bus: Device: "/dev/input/event3"
- [ 21.815] (--) evdev: Video Bus: Vendor 0 Product 0x6
- [ 21.815] (--) evdev: Video Bus: Found keys
- [ 21.815] (II) evdev: Video Bus: Configuring as keyboard
- [ 21.815] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input3/event3"
- [ 21.815] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
- [ 21.815] (**) Option "xkb_rules" "evdev"
- [ 21.815] (**) Option "xkb_model" "evdev"
- [ 21.815] (**) Option "xkb_layout" "no"
- [ 21.815] (**) Option "xkb_variant" ",qwerty"
- [ 21.900] (II) config/udev: Adding input device Power Button (/dev/input/event1)
- [ 21.900] (**) Power Button: Applying InputClass "evdev keyboard catchall"
- [ 21.900] (**) Power Button: Applying InputClass "keyboard-all"
- [ 21.900] (II) Using input driver 'evdev' for 'Power Button'
- [ 21.900] (**) Power Button: always reports core events
- [ 21.900] (**) evdev: Power Button: Device: "/dev/input/event1"
- [ 21.900] (--) evdev: Power Button: Vendor 0 Product 0x1
- [ 21.900] (--) evdev: Power Button: Found keys
- [ 21.900] (II) evdev: Power Button: Configuring as keyboard
- [ 21.900] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
- [ 21.900] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
- [ 21.900] (**) Option "xkb_rules" "evdev"
- [ 21.900] (**) Option "xkb_model" "evdev"
- [ 21.900] (**) Option "xkb_layout" "no"
- [ 21.900] (**) Option "xkb_variant" ",qwerty"
- [ 21.901] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
- [ 21.901] (II) No input driver specified, ignoring this device.
- [ 21.901] (II) This device may have been added with another device file.
- [ 21.902] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
- [ 21.902] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
- [ 21.902] (**) Sleep Button: Applying InputClass "keyboard-all"
- [ 21.902] (II) Using input driver 'evdev' for 'Sleep Button'
- [ 21.902] (**) Sleep Button: always reports core events
- [ 21.902] (**) evdev: Sleep Button: Device: "/dev/input/event2"
- [ 21.902] (--) evdev: Sleep Button: Vendor 0 Product 0x3
- [ 21.902] (--) evdev: Sleep Button: Found keys
- [ 21.902] (II) evdev: Sleep Button: Configuring as keyboard
- [ 21.902] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
- [ 21.902] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
- [ 21.902] (**) Option "xkb_rules" "evdev"
- [ 21.902] (**) Option "xkb_model" "evdev"
- [ 21.902] (**) Option "xkb_layout" "no"
- [ 21.902] (**) Option "xkb_variant" ",qwerty"
- [ 21.903] (II) config/udev: Adding drm device (/dev/dri/card0)
- [ 21.903] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
- [ 21.903] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
- [ 21.903] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-all"
- [ 21.903] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
- [ 21.904] (**) AT Translated Set 2 keyboard: always reports core events
- [ 21.904] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
- [ 21.904] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
- [ 21.904] (--) evdev: AT Translated Set 2 keyboard: Found keys
- [ 21.904] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
- [ 21.904] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
- [ 21.904] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
- [ 21.904] (**) Option "xkb_rules" "evdev"
- [ 21.904] (**) Option "xkb_model" "evdev"
- [ 21.904] (**) Option "xkb_layout" "no"
- [ 21.904] (**) Option "xkb_variant" ",qwerty"
- [ 21.905] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event6)
- [ 21.905] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
- [ 21.905] (II) Using input driver 'evdev' for 'PS/2 Mouse'
- [ 21.905] (**) PS/2 Mouse: always reports core events
- [ 21.905] (**) evdev: PS/2 Mouse: Device: "/dev/input/event6"
- [ 21.905] (--) evdev: PS/2 Mouse: Vendor 0x2 Product 0x8
- [ 21.905] (--) evdev: PS/2 Mouse: Found 3 mouse buttons
- [ 21.905] (--) evdev: PS/2 Mouse: Found relative axes
- [ 21.905] (--) evdev: PS/2 Mouse: Found x and y relative axes
- [ 21.905] (II) evdev: PS/2 Mouse: Configuring as mouse
- [ 21.905] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5
- [ 21.905] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- [ 21.905] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
- [ 21.905] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE, id 10)
- [ 21.905] (II) evdev: PS/2 Mouse: initialized for relative axes.
- [ 21.905] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
- [ 21.905] (**) PS/2 Mouse: (accel) acceleration profile 0
- [ 21.906] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
- [ 21.906] (**) PS/2 Mouse: (accel) acceleration threshold: 4
- [ 21.906] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
- [ 21.906] (II) No input driver specified, ignoring this device.
- [ 21.906] (II) This device may have been added with another device file.
- [ 21.906] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event7)
- [ 21.906] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
- [ 21.906] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
- [ 21.906] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
- [ 21.906] (II) LoadModule: "synaptics"
- [ 21.907] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
- [ 21.933] (II) Module synaptics: vendor="X.Org Foundation"
- [ 21.933] compiled for 1.13.4, module version = 1.6.2
- [ 21.933] Module class: X.Org XInput Driver
- [ 21.933] ABI class: X.Org XInput driver, version 18.0
- [ 21.933] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
- [ 21.933] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
- [ 21.933] (**) Option "Device" "/dev/input/event7"
- [ 21.933] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
- [ 21.933] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
- [ 21.933] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
- [ 21.933] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
- [ 21.933] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
- [ 21.933] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
- [ 21.933] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
- [ 21.933] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
- [ 21.933] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
- [ 21.933] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
- [ 21.933] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 11)
- [ 21.933] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
- [ 21.933] (**) synaptics: AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
- [ 21.933] (**) synaptics: AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
- [ 21.934] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
- [ 21.934] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
- [ 21.934] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
- [ 21.934] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
- [ 21.934] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
- [ 21.934] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
- [ 21.934] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
- [ 21.935] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
- [ 21.935] (II) No input driver specified, ignoring this device.
- [ 21.935] (II) This device may have been added with another device file.
- [ 335.811] (II) intel(0): EDID vendor "SEC", prod id 16984
- [ 335.812] (II) intel(0): Printing DDC gathered Modelines:
- [ 335.812] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
- [ 338.300] (II) intel(0): EDID vendor "SEC", prod id 16984
- [ 338.300] (II) intel(0): Printing DDC gathered Modelines:
- [ 338.300] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
- [ 338.623] (II) intel(0): EDID vendor "SEC", prod id 16984
- [ 338.623] (II) intel(0): Printing DDC gathered Modelines:
- [ 338.623] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
- [ 14761.918] (II) intel(0): switch to mode 1024x768 on crtc 4 (pipe 1)
- [ 30925.416] (II) intel(0): switch to mode 1024x768 on crtc 4 (pipe 1)
- [ 45375.113] (II) intel(0): switch to mode 1024x768 on crtc 4 (pipe 1)
- [ 45536.220] (II) intel(0): switch to mode 1024x768 on crtc 4 (pipe 1)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement